iommu/omap: Migrate to hwmod framework

Use hwmod data and device attributes to build and register an
omap device for iommu driver.

 - Update the naming convention in isp module.
 - Remove unneeded check for number of resources, as this is now
   handled by omap_device and prevents driver from loading.
 - Now unused, remove platform device and resource data, handling
   of sysconfig register for softreset purposes, use default
   latency structure.
 - Use hwmod API for reset handling.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>

2 files changed, 18 insertions, 24 deletions

diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index f8082da6179..af9b4f31f59 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -143,13 +143,23 @@ EXPORT_SYMBOL_GPL(omap_iommu_arch_version);
 static int iommu_enable(struct omap_iommu *obj)
 {
 	int err;
+	struct platform_device *pdev = to_platform_device(obj->dev);
+	struct iommu_platform_data *pdata = pdev->dev.platform_data;
 
-	if (!obj)
+	if (!obj || !pdata)
 		return -EINVAL;
 
 	if (!arch_iommu)
 		return -ENODEV;
 
+	if (pdata->deassert_reset) {
+		err = pdata->deassert_reset(pdev, pdata->reset_name);
+		if (err) {
+			dev_err(obj->dev, "deassert_reset failed: %d\n", err);
+			return err;
+		}
+	}
+
 	clk_enable(obj->clk);
 
 	err = arch_iommu->enable(obj);
@@ -159,12 +169,18 @@ static int iommu_enable(struct omap_iommu *obj)
 
 static void iommu_disable(struct omap_iommu *obj)
 {
-	if (!obj)
+	struct platform_device *pdev = to_platform_device(obj->dev);
+	struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!obj || !pdata)
 		return;
 
 	arch_iommu->disable(obj);
 
 	clk_disable(obj->clk);
+
+	if (pdata->assert_reset)
+		pdata->assert_reset(pdev, pdata->reset_name);
 }
 
 /*
@@ -926,9 +942,6 @@ static int __devinit omap_iommu_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct iommu_platform_data *pdata = pdev->dev.platform_data;
 
-	if (pdev->num_resources != 2)
-		return -EINVAL;
-
 	obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
 	if (!obj)
 		return -ENOMEM;
diff --git a/drivers/iommu/omap-iommu2.c b/drivers/iommu/omap-iommu2.c
index c0202029237..4a3a1c7a38c 100644
--- a/drivers/iommu/omap-iommu2.c
+++ b/drivers/iommu/omap-iommu2.c
@@ -35,12 +35,8 @@
 #define MMU_SYS_IDLE_SMART	(2 << MMU_SYS_IDLE_SHIFT)
 #define MMU_SYS_IDLE_MASK	(3 << MMU_SYS_IDLE_SHIFT)
 
-#define MMU_SYS_SOFTRESET	(1 << 1)
 #define MMU_SYS_AUTOIDLE	1
 
-/* SYSSTATUS */
-#define MMU_SYS_RESETDONE	1
-
 /* IRQSTATUS & IRQENABLE */
 #define MMU_IRQ_MULTIHITFAULT	(1 << 4)
 #define MMU_IRQ_TABLEWALKFAULT	(1 << 3)
@@ -97,7 +93,6 @@ static void __iommu_set_twl(struct omap_iommu *obj, bool on)
 static int omap2_iommu_enable(struct omap_iommu *obj)
 {
 	u32 l, pa;
-	unsigned long timeout;
 
 	if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd,  SZ_16K))
 		return -EINVAL;
@@ -106,20 +101,6 @@ static int omap2_iommu_enable(struct omap_iommu *obj)
 	if (!IS_ALIGNED(pa, SZ_16K))
 		return -EINVAL;
 
-	iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
-
-	timeout = jiffies + msecs_to_jiffies(20);
-	do {
-		l = iommu_read_reg(obj, MMU_SYSSTATUS);
-		if (l & MMU_SYS_RESETDONE)
-			break;
-	} while (!time_after(jiffies, timeout));
-
-	if (!(l & MMU_SYS_RESETDONE)) {
-		dev_err(obj->dev, "can't take mmu out of reset\n");
-		return -ENODEV;
-	}
-
 	l = iommu_read_reg(obj, MMU_REVISION);
 	dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
 		 (l >> 4) & 0xf, l & 0xf);