Input: generic driver for rotary encoders on GPIOs

This patch adds a generic driver for rotary encoders connected to GPIO
pins of a system. It relies on gpiolib and generic hardware irqs. The
documentation that also comes with this patch explains the concept and
how to use the driver.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

3 files changed, 234 insertions, 0 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 67e5553f699..806d2e66d24 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -227,4 +227,15 @@ config INPUT_PCF50633_PMU
 	 Say Y to include support for delivering  PMU events via  input
 	 layer on NXP PCF50633.
 
+config INPUT_GPIO_ROTARY_ENCODER
+	tristate "Rotary encoders connected to GPIO pins"
+	depends on GPIOLIB && GENERIC_GPIO
+	help
+	  Say Y here to add support for rotary encoders connected to GPIO lines.
+	  Check file:Documentation/incput/rotary_encoder.txt for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rotary_encoder.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index bb62e6efacf..e86cee66c91 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -22,3 +22,5 @@ obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
+obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
+
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
new file mode 100644
index 00000000000..5bb3ab51b8c
--- /dev/null
+++ b/drivers/input/misc/rotary_encoder.c
@@ -0,0 +1,221 @@
+/*
+ * rotary_encoder.c
+ *
+ * (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * state machine code inspired by code from Tim Ruetz
+ *
+ * A generic driver for rotary encoders connected to GPIO lines.
+ * See file:Documentation/input/rotary_encoder.txt for more information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/rotary_encoder.h>
+
+#define DRV_NAME "rotary-encoder"
+
+struct rotary_encoder {
+	unsigned int irq_a;
+	unsigned int irq_b;
+	unsigned int pos;
+	unsigned int armed;
+	unsigned int dir;
+	struct input_dev *input;
+	struct rotary_encoder_platform_data *pdata;
+};
+
+static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
+{
+	struct rotary_encoder *encoder = dev_id;
+	struct rotary_encoder_platform_data *pdata = encoder->pdata;
+	int a = !!gpio_get_value(pdata->gpio_a);
+	int b = !!gpio_get_value(pdata->gpio_b);
+	int state;
+
+	a ^= pdata->inverted_a;
+	b ^= pdata->inverted_b;
+	state = (a << 1) | b;
+
+	switch (state) {
+
+	case 0x0:
+		if (!encoder->armed)
+			break;
+
+		if (encoder->dir) {
+			/* turning counter-clockwise */
+			encoder->pos += pdata->steps;
+			encoder->pos--;
+			encoder->pos %= pdata->steps;
+		} else {
+			/* turning clockwise */
+			encoder->pos++;
+			encoder->pos %= pdata->steps;
+		}
+
+		input_report_abs(encoder->input, pdata->axis, encoder->pos);
+		input_sync(encoder->input);
+
+		encoder->armed = 0;
+		break;
+
+	case 0x1:
+	case 0x2:
+		if (encoder->armed)
+			encoder->dir = state - 1;
+		break;
+
+	case 0x3:
+		encoder->armed = 1;
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit rotary_encoder_probe(struct platform_device *pdev)
+{
+	struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data;
+	struct rotary_encoder *encoder;
+	struct input_dev *input;
+	int err;
+
+	if (!pdata || !pdata->steps) {
+		dev_err(&pdev->dev, "invalid platform data\n");
+		return -ENOENT;
+	}
+
+	encoder = kzalloc(sizeof(struct rotary_encoder), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!encoder || !input) {
+		dev_err(&pdev->dev, "failed to allocate memory for device\n");
+		err = -ENOMEM;
+		goto exit_free_mem;
+	}
+
+	encoder->input = input;
+	encoder->pdata = pdata;
+	encoder->irq_a = gpio_to_irq(pdata->gpio_a);
+	encoder->irq_b = gpio_to_irq(pdata->gpio_b);
+
+	/* create and register the input driver */
+	input->name = pdev->name;
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = &pdev->dev;
+	input->evbit[0] = BIT_MASK(EV_ABS);
+	input_set_abs_params(encoder->input,
+			     pdata->axis, 0, pdata->steps, 0, 1);
+
+	err = input_register_device(input);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto exit_free_mem;
+	}
+
+	/* request the GPIOs */
+	err = gpio_request(pdata->gpio_a, DRV_NAME);
+	if (err) {
+		dev_err(&pdev->dev, "unable to request GPIO %d\n",
+			pdata->gpio_a);
+		goto exit_unregister_input;
+	}
+
+	err = gpio_request(pdata->gpio_b, DRV_NAME);
+	if (err) {
+		dev_err(&pdev->dev, "unable to request GPIO %d\n",
+			pdata->gpio_b);
+		goto exit_free_gpio_a;
+	}
+
+	/* request the IRQs */
+	err = request_irq(encoder->irq_a, &rotary_encoder_irq,
+			  IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+			  DRV_NAME, encoder);
+	if (err) {
+		dev_err(&pdev->dev, "unable to request IRQ %d\n",
+			encoder->irq_a);
+		goto exit_free_gpio_b;
+	}
+
+	err = request_irq(encoder->irq_b, &rotary_encoder_irq,
+			  IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+			  DRV_NAME, encoder);
+	if (err) {
+		dev_err(&pdev->dev, "unable to request IRQ %d\n",
+			encoder->irq_b);
+		goto exit_free_irq_a;
+	}
+
+	platform_set_drvdata(pdev, encoder);
+
+	return 0;
+
+exit_free_irq_a:
+	free_irq(encoder->irq_a, encoder);
+exit_free_gpio_b:
+	gpio_free(pdata->gpio_b);
+exit_free_gpio_a:
+	gpio_free(pdata->gpio_a);
+exit_unregister_input:
+	input_unregister_device(input);
+	input = NULL; /* so we don't try to free it */
+exit_free_mem:
+	input_free_device(input);
+	kfree(encoder);
+	return err;
+}
+
+static int __devexit rotary_encoder_remove(struct platform_device *pdev)
+{
+	struct rotary_encoder *encoder = platform_get_drvdata(pdev);
+	struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data;
+
+	free_irq(encoder->irq_a, encoder);
+	free_irq(encoder->irq_b, encoder);
+	gpio_free(pdata->gpio_a);
+	gpio_free(pdata->gpio_b);
+	input_unregister_device(encoder->input);
+	platform_set_drvdata(pdev, NULL);
+	kfree(encoder);
+
+	return 0;
+}
+
+static struct platform_driver rotary_encoder_driver = {
+	.probe		= rotary_encoder_probe,
+	.remove		= __devexit_p(rotary_encoder_remove),
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	}
+};
+
+static int __init rotary_encoder_init(void)
+{
+	return platform_driver_register(&rotary_encoder_driver);
+}
+
+static void __exit rotary_encoder_exit(void)
+{
+	platform_driver_unregister(&rotary_encoder_driver);
+}
+
+module_init(rotary_encoder_init);
+module_exit(rotary_encoder_exit);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION("GPIO rotary encoder driver");
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_LICENSE("GPL v2");
+