Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: psmouse - small formatting changes to better follow coding style
  Input: synaptics - set dimensions as reported by firmware
  Input: elantech - relax signature checks
  Input: elantech - enforce common prefix on messages
  Input: wistron_btns - switch to using kmemdup()
  Input: usbtouchscreen - switch to using kmemdup()
  Input: do not force selecting i8042 on Moorestown
  Input: Documentation/sysrq.txt - update KEY_SYSRQ info
  Input: 88pm860x_onkey - remove invalid irq number assignment
  Input: i8042 - add a PNP entry to the aux device list
  Input: i8042 - add some extra PNP keyboard types
  Input: wm9712 - fix wm97xx_set_gpio() logic
  Input: add keypad driver for keys interfaced to TCA6416
  Input: remove obsolete {corgi,spitz,tosa}kbd.c
  Input: kbtab - do not advertise unsupported events
  Input: kbtab - simplify kbtab_disconnect()
  Input: kbtab - fix incorrect size parameter in usb_buffer_free
  Input: acecad - don't advertise mouse events
  Input: acecad - fix some formatting issues
  Input: acecad - simplify usb_acecad_disconnect()
  ...

Trivial conflict in Documentation/feature-removal-schedule.txt

33 files changed, 3491 insertions, 1010 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a8293388d01..d8fa5d724c5 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -73,7 +73,7 @@ config KEYBOARD_ATKBD
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86
+	select SERIO_I8042 if X86 && !X86_MRST
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
@@ -179,6 +179,22 @@ config KEYBOARD_GPIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio_keys.
 
+config KEYBOARD_TCA6416
+	tristate "TCA6416 Keypad Support"
+	depends on I2C
+	help
+	  This driver implements basic keypad functionality
+	  for keys connected through TCA6416 IO expander
+
+	  Say Y here if your device has keys connected to
+	  TCA6416 IO expander. Your board-specific setup logic
+	  must also provide pin-mask details(of which TCA6416 pins
+	  are used for keypad).
+
+	  If enabled the complete TCA6416 device will be managed through
+	  this driver.
+
+
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
 	depends on GENERIC_GPIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 9a74127e4d1..4596d0c6f92 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
+obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 60ac4684f87..bc696931fed 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -670,8 +670,6 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 		goto fail1;
 	}
 
-	i2c_set_clientdata(client, lm);
-
 	lm->client = client;
 	lm->idev = idev;
 	mutex_init(&lm->lock);
@@ -753,6 +751,8 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 		goto fail4;
 	}
 
+	i2c_set_clientdata(client, lm);
+
 	device_init_wakeup(&client->dev, 1);
 	enable_irq_wake(client->irq);
 
@@ -778,6 +778,8 @@ static int __devexit lm8323_remove(struct i2c_client *client)
 	struct lm8323_chip *lm = i2c_get_clientdata(client);
 	int i;
 
+	i2c_set_clientdata(client, NULL);
+
 	disable_irq_wake(client->irq);
 	free_irq(client->irq, lm);
 	cancel_work_sync(&lm->work);
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
new file mode 100644
index 00000000000..493c93f25e2
--- /dev/null
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -0,0 +1,349 @@
+/*
+ * Driver for keys on TCA6416 I2C IO expander
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author : Sriramakrishnan.A.G. <srk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/tca6416_keypad.h>
+
+#define TCA6416_INPUT          0
+#define TCA6416_OUTPUT         1
+#define TCA6416_INVERT         2
+#define TCA6416_DIRECTION      3
+
+static const struct i2c_device_id tca6416_id[] = {
+	{ "tca6416-keys", 16, },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tca6416_id);
+
+struct tca6416_drv_data {
+	struct input_dev *input;
+	struct tca6416_button data[0];
+};
+
+struct tca6416_keypad_chip {
+	uint16_t reg_output;
+	uint16_t reg_direction;
+	uint16_t reg_input;
+
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct delayed_work dwork;
+	u16 pinmask;
+	int irqnum;
+	bool use_polling;
+	struct tca6416_button buttons[0];
+};
+
+static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val)
+{
+	int error;
+
+	error = i2c_smbus_write_word_data(chip->client, reg << 1, val);
+	if (error < 0) {
+		dev_err(&chip->client->dev,
+			"%s failed, reg: %d, val: %d, error: %d\n",
+			__func__, reg, val, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
+{
+	int retval;
+
+	retval = i2c_smbus_read_word_data(chip->client, reg << 1);
+	if (retval < 0) {
+		dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n",
+			__func__, reg, retval);
+		return retval;
+	}
+
+	*val = (u16)retval;
+	return 0;
+}
+
+static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
+{
+	struct input_dev *input = chip->input;
+	u16 reg_val, val;
+	int error, i, pin_index;
+
+	error = tca6416_read_reg(chip, TCA6416_INPUT, &reg_val);
+	if (error)
+		return;
+
+	reg_val &= chip->pinmask;
+
+	/* Figure out which lines have changed */
+	val = reg_val ^ chip->reg_input;
+	chip->reg_input = reg_val;
+
+	for (i = 0, pin_index = 0; i < 16; i++) {
+		if (val & (1 << i)) {
+			struct tca6416_button *button = &chip->buttons[pin_index];
+			unsigned int type = button->type ?: EV_KEY;
+			int state = ((reg_val & (1 << i)) ? 1 : 0)
+						^ button->active_low;
+
+			input_event(input, type, button->code, !!state);
+			input_sync(input);
+		}
+
+		if (chip->pinmask & (1 << i))
+			pin_index++;
+	}
+}
+
+/*
+ * This is threaded IRQ handler and this can (and will) sleep.
+ */
+static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
+{
+	struct tca6416_keypad_chip *chip = dev_id;
+
+	tca6416_keys_scan(chip);
+
+	return IRQ_HANDLED;
+}
+
+static void tca6416_keys_work_func(struct work_struct *work)
+{
+	struct tca6416_keypad_chip *chip =
+		container_of(work, struct tca6416_keypad_chip, dwork.work);
+
+	tca6416_keys_scan(chip);
+	schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
+}
+
+static int tca6416_keys_open(struct input_dev *dev)
+{
+	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
+
+	/* Get initial device state in case it has switches */
+	tca6416_keys_scan(chip);
+
+	if (chip->use_polling)
+		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
+	else
+		enable_irq(chip->irqnum);
+
+	return 0;
+}
+
+static void tca6416_keys_close(struct input_dev *dev)
+{
+	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
+
+	if (chip->use_polling)
+		cancel_delayed_work_sync(&chip->dwork);
+	else
+		disable_irq(chip->irqnum);
+}
+
+static int __devinit tca6416_setup_registers(struct tca6416_keypad_chip *chip)
+{
+	int error;
+
+	error = tca6416_read_reg(chip, TCA6416_OUTPUT, &chip->reg_output);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
+	if (error)
+		return error;
+
+	/* ensure that keypad pins are set to input */
+	error = tca6416_write_reg(chip, TCA6416_DIRECTION,
+				  chip->reg_direction | chip->pinmask);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_INPUT, &chip->reg_input);
+	if (error)
+		return error;
+
+	chip->reg_input &= chip->pinmask;
+
+	return 0;
+}
+
+static int __devinit tca6416_keypad_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct tca6416_keys_platform_data *pdata;
+	struct tca6416_keypad_chip *chip;
+	struct input_dev *input;
+	int error;
+	int i;
+
+	/* Check functionality */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
+		dev_err(&client->dev, "%s adapter not supported\n",
+			dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	chip = kzalloc(sizeof(struct tca6416_keypad_chip) +
+		       pdata->nbuttons * sizeof(struct tca6416_button),
+		       GFP_KERNEL);
+	input = input_allocate_device();
+	if (!chip || !input) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	chip->client = client;
+	chip->input = input;
+	chip->pinmask = pdata->pinmask;
+	chip->use_polling = pdata->use_polling;
+
+	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
+
+	input->phys = "tca6416-keys/input0";
+	input->name = client->name;
+	input->dev.parent = &client->dev;
+
+	input->open = tca6416_keys_open;
+	input->close = tca6416_keys_close;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		unsigned int type;
+
+		chip->buttons[i] = pdata->buttons[i];
+		type = (pdata->buttons[i].type) ?: EV_KEY;
+		input_set_capability(input, type, pdata->buttons[i].code);
+	}
+
+	input_set_drvdata(input, chip);
+
+	/*
+	 * Initialize cached registers from their original values.
+	 * we can't share this chip with another i2c master.
+	 */
+	error = tca6416_setup_registers(chip);
+	if (error)
+		goto fail1;
+
+	if (!chip->use_polling) {
+		if (pdata->irq_is_gpio)
+			chip->irqnum = gpio_to_irq(client->irq);
+		else
+			chip->irqnum = client->irq;
+
+		error = request_threaded_irq(chip->irqnum, NULL,
+					     tca6416_keys_isr,
+					     IRQF_TRIGGER_FALLING,
+					     "tca6416-keypad", chip);
+		if (error) {
+			dev_dbg(&client->dev,
+				"Unable to claim irq %d; error %d\n",
+				chip->irqnum, error);
+			goto fail1;
+		}
+		disable_irq(chip->irqnum);
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_dbg(&client->dev,
+			"Unable to register input device, error: %d\n", error);
+		goto fail2;
+	}
+
+	i2c_set_clientdata(client, chip);
+
+	return 0;
+
+fail2:
+	if (!chip->use_polling) {
+		free_irq(chip->irqnum, chip);
+		enable_irq(chip->irqnum);
+	}
+fail1:
+	input_free_device(input);
+	kfree(chip);
+	return error;
+}
+
+static int __devexit tca6416_keypad_remove(struct i2c_client *client)
+{
+	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
+
+	if (!chip->use_polling) {
+		free_irq(chip->irqnum, chip);
+		enable_irq(chip->irqnum);
+	}
+
+	input_unregister_device(chip->input);
+	kfree(chip);
+
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+
+static struct i2c_driver tca6416_keypad_driver = {
+	.driver = {
+		.name	= "tca6416-keypad",
+	},
+	.probe		= tca6416_keypad_probe,
+	.remove		= __devexit_p(tca6416_keypad_remove),
+	.id_table	= tca6416_id,
+};
+
+static int __init tca6416_keypad_init(void)
+{
+	return i2c_add_driver(&tca6416_keypad_driver);
+}
+
+subsys_initcall(tca6416_keypad_init);
+
+static void __exit tca6416_keypad_exit(void)
+{
+	i2c_del_driver(&tca6416_keypad_driver);
+}
+module_exit(tca6416_keypad_exit);
+
+MODULE_AUTHOR("Sriramakrishnan <srk@ti.com>");
+MODULE_DESCRIPTION("Keypad driver over tca6146 IO expander");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c
index 40dabd8487b..4cc82826ea6 100644
--- a/drivers/input/misc/88pm860x_onkey.c
+++ b/drivers/input/misc/88pm860x_onkey.c
@@ -87,7 +87,6 @@ static int __devinit pm860x_onkey_probe(struct platform_device *pdev)
 	info->idev->phys = "88pm860x_on/input0";
 	info->idev->id.bustype = BUS_I2C;
 	info->idev->dev.parent = &pdev->dev;
-	info->irq = irq;
 	info->idev->evbit[0] = BIT_MASK(EV_KEY);
 	info->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 23140a3bb8e..48cdabec372 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -22,6 +22,36 @@ config INPUT_88PM860X_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called 88pm860x_onkey.
 
+config INPUT_AD714X
+	tristate "Analog Devices AD714x Capacitance Touch Sensor"
+	help
+	  Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
+
+	  You should select a bus connection too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x.
+
+config INPUT_AD714X_I2C
+	tristate "support I2C bus connection"
+	depends on INPUT_AD714X && I2C
+	default y
+	help
+	  Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x-i2c.
+
+config INPUT_AD714X_SPI
+	tristate "support SPI bus connection"
+	depends on INPUT_AD714X && SPI
+	default y
+	help
+	  Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x-spi.
+
 config INPUT_PCSPKR
 	tristate "PC Speaker support"
 	depends on PCSPKR_PLATFORM
@@ -277,6 +307,16 @@ config INPUT_PCF50633_PMU
 	 Say Y to include support for delivering  PMU events via  input
 	 layer on NXP PCF50633.
 
+config INPUT_PCF8574
+	tristate "PCF8574 Keypad input device"
+	depends on I2C && EXPERIMENTAL
+	help
+	  Say Y here if you want to support a keypad connetced via I2C
+	  with a PCF8574.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcf8574_keypad.
+
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
 	depends on GPIOLIB && GENERIC_GPIO
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 7e95a5d474d..f9f577031e0 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -5,6 +5,9 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
+obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
+obj-$(CONFIG_INPUT_AD714X_I2C)		+= ad714x-i2c.o
+obj-$(CONFIG_INPUT_AD714X_SPI)		+= ad714x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
@@ -19,6 +22,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
+obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c
new file mode 100644
index 00000000000..e9adbe49f6a
--- /dev/null
+++ b/drivers/input/misc/ad714x-i2c.c
@@ -0,0 +1,140 @@
+/*
+ * AD714X CapTouch Programmable Controller driver (I2C bus)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include "ad714x.h"
+
+#ifdef CONFIG_PM
+static int ad714x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+	return ad714x_disable(i2c_get_clientdata(client));
+}
+
+static int ad714x_i2c_resume(struct i2c_client *client)
+{
+	return ad714x_enable(i2c_get_clientdata(client));
+}
+#else
+# define ad714x_i2c_suspend NULL
+# define ad714x_i2c_resume  NULL
+#endif
+
+static int ad714x_i2c_write(struct device *dev, unsigned short reg,
+				unsigned short data)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = 0;
+	u8 *_reg = (u8 *)&reg;
+	u8 *_data = (u8 *)&data;
+
+	u8 tx[4] = {
+		_reg[1],
+		_reg[0],
+		_data[1],
+		_data[0]
+	};
+
+	ret = i2c_master_send(client, tx, 4);
+	if (ret < 0)
+		dev_err(&client->dev, "I2C write error\n");
+
+	return ret;
+}
+
+static int ad714x_i2c_read(struct device *dev, unsigned short reg,
+				unsigned short *data)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret = 0;
+	u8 *_reg = (u8 *)&reg;
+	u8 *_data = (u8 *)data;
+
+	u8 tx[2] = {
+		_reg[1],
+		_reg[0]
+	};
+	u8 rx[2];
+
+	ret = i2c_master_send(client, tx, 2);
+	if (ret >= 0)
+		ret = i2c_master_recv(client, rx, 2);
+
+	if (unlikely(ret < 0)) {
+		dev_err(&client->dev, "I2C read error\n");
+	} else {
+		_data[0] = rx[1];
+		_data[1] = rx[0];
+	}
+
+	return ret;
+}
+
+static int __devinit ad714x_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct ad714x_chip *chip;
+
+	chip = ad714x_probe(&client->dev, BUS_I2C, client->irq,
+			    ad714x_i2c_read, ad714x_i2c_write);
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+
+	i2c_set_clientdata(client, chip);
+
+	return 0;
+}
+
+static int __devexit ad714x_i2c_remove(struct i2c_client *client)
+{
+	struct ad714x_chip *chip = i2c_get_clientdata(client);
+
+	ad714x_remove(chip);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+static const struct i2c_device_id ad714x_id[] = {
+	{ "ad7142_captouch", 0 },
+	{ "ad7143_captouch", 0 },
+	{ "ad7147_captouch", 0 },
+	{ "ad7147a_captouch", 0 },
+	{ "ad7148_captouch", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ad714x_id);
+
+static struct i2c_driver ad714x_i2c_driver = {
+	.driver = {
+		.name = "ad714x_captouch",
+	},
+	.probe    = ad714x_i2c_probe,
+	.remove   = __devexit_p(ad714x_i2c_remove),
+	.suspend  = ad714x_i2c_suspend,
+	.resume	  = ad714x_i2c_resume,
+	.id_table = ad714x_id,
+};
+
+static __init int ad714x_i2c_init(void)
+{
+	return i2c_add_driver(&ad714x_i2c_driver);
+}
+module_init(ad714x_i2c_init);
+
+static __exit void ad714x_i2c_exit(void)
+{
+	i2c_del_driver(&ad714x_i2c_driver);
+}
+module_exit(ad714x_i2c_exit);
+
+MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c
new file mode 100644
index 00000000000..7f8dedfd1bf
--- /dev/null
+++ b/drivers/input/misc/ad714x-spi.c
@@ -0,0 +1,103 @@
+/*
+ * AD714X CapTouch Programmable Controller driver (SPI bus)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include "ad714x.h"
+
+#define AD714x_SPI_CMD_PREFIX      0xE000   /* bits 15:11 */
+#define AD714x_SPI_READ            BIT(10)
+
+#ifdef CONFIG_PM
+static int ad714x_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+	return ad714x_disable(spi_get_drvdata(spi));
+}
+
+static int ad714x_spi_resume(struct spi_device *spi)
+{
+	return ad714x_enable(spi_get_drvdata(spi));
+}
+#else
+# define ad714x_spi_suspend NULL
+# define ad714x_spi_resume  NULL
+#endif
+
+static int ad714x_spi_read(struct device *dev, unsigned short reg,
+		unsigned short *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned short tx = AD714x_SPI_CMD_PREFIX | AD714x_SPI_READ | reg;
+
+	return spi_write_then_read(spi, (u8 *)&tx, 2, (u8 *)data, 2);
+}
+
+static int ad714x_spi_write(struct device *dev, unsigned short reg,
+		unsigned short data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned short tx[2] = {
+		AD714x_SPI_CMD_PREFIX | reg,
+		data
+	};
+
+	return spi_write(spi, (u8 *)tx, 4);
+}
+
+static int __devinit ad714x_spi_probe(struct spi_device *spi)
+{
+	struct ad714x_chip *chip;
+
+	chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq,
+			    ad714x_spi_read, ad714x_spi_write);
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+
+	spi_set_drvdata(spi, chip);
+
+	return 0;
+}
+
+static int __devexit ad714x_spi_remove(struct spi_device *spi)
+{
+	struct ad714x_chip *chip = spi_get_drvdata(spi);
+
+	ad714x_remove(chip);
+	spi_set_drvdata(spi, NULL);
+
+	return 0;
+}
+
+static struct spi_driver ad714x_spi_driver = {
+	.driver = {
+		.name	= "ad714x_captouch",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad714x_spi_probe,
+	.remove		= __devexit_p(ad714x_spi_remove),
+	.suspend	= ad714x_spi_suspend,
+	.resume		= ad714x_spi_resume,
+};
+
+static __init int ad714x_spi_init(void)
+{
+	return spi_register_driver(&ad714x_spi_driver);
+}
+module_init(ad714x_spi_init);
+
+static __exit void ad714x_spi_exit(void)
+{
+	spi_unregister_driver(&ad714x_spi_driver);
+}
+module_exit(ad714x_spi_exit);
+
+MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
new file mode 100644
index 00000000000..0fe27baf5e7
--- /dev/null
+++ b/drivers/input/misc/ad714x.c
@@ -0,0 +1,1347 @@
+/*
+ * AD714X CapTouch Programmable Controller driver supporting AD7142/3/7/8/7A
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input/ad714x.h>
+#include "ad714x.h"
+
+#define AD714X_PWR_CTRL           0x0
+#define AD714X_STG_CAL_EN_REG     0x1
+#define AD714X_AMB_COMP_CTRL0_REG 0x2
+#define AD714X_PARTID_REG         0x17
+#define AD7142_PARTID             0xE620
+#define AD7143_PARTID             0xE630
+#define AD7147_PARTID             0x1470
+#define AD7148_PARTID             0x1480
+#define AD714X_STAGECFG_REG       0x80
+#define AD714X_SYSCFG_REG         0x0
+
+#define STG_LOW_INT_EN_REG     0x5
+#define STG_HIGH_INT_EN_REG    0x6
+#define STG_COM_INT_EN_REG     0x7
+#define STG_LOW_INT_STA_REG    0x8
+#define STG_HIGH_INT_STA_REG   0x9
+#define STG_COM_INT_STA_REG    0xA
+
+#define CDC_RESULT_S0          0xB
+#define CDC_RESULT_S1          0xC
+#define CDC_RESULT_S2          0xD
+#define CDC_RESULT_S3          0xE
+#define CDC_RESULT_S4          0xF
+#define CDC_RESULT_S5          0x10
+#define CDC_RESULT_S6          0x11
+#define CDC_RESULT_S7          0x12
+#define CDC_RESULT_S8          0x13
+#define CDC_RESULT_S9          0x14
+#define CDC_RESULT_S10         0x15
+#define CDC_RESULT_S11         0x16
+
+#define STAGE0_AMBIENT		0xF1
+#define STAGE1_AMBIENT		0x115
+#define STAGE2_AMBIENT		0x139
+#define STAGE3_AMBIENT		0x15D
+#define STAGE4_AMBIENT		0x181
+#define STAGE5_AMBIENT		0x1A5
+#define STAGE6_AMBIENT		0x1C9
+#define STAGE7_AMBIENT		0x1ED
+#define STAGE8_AMBIENT		0x211
+#define STAGE9_AMBIENT		0x234
+#define STAGE10_AMBIENT		0x259
+#define STAGE11_AMBIENT		0x27D
+
+#define PER_STAGE_REG_NUM      36
+#define STAGE_NUM              12
+#define STAGE_CFGREG_NUM       8
+#define SYS_CFGREG_NUM         8
+
+/*
+ * driver information which will be used to maintain the software flow
+ */
+enum ad714x_device_state { IDLE, JITTER, ACTIVE, SPACE };
+
+struct ad714x_slider_drv {
+	int highest_stage;
+	int abs_pos;
+	int flt_pos;
+	enum ad714x_device_state state;
+	struct input_dev *input;
+};
+
+struct ad714x_wheel_drv {
+	int abs_pos;
+	int flt_pos;
+	int pre_mean_value;
+	int pre_highest_stage;
+	int pre_mean_value_no_offset;
+	int mean_value;
+	int mean_value_no_offset;
+	int pos_offset;
+	int pos_ratio;
+	int highest_stage;
+	enum ad714x_device_state state;
+	struct input_dev *input;
+};
+
+struct ad714x_touchpad_drv {
+	int x_highest_stage;
+	int x_flt_pos;
+	int x_abs_pos;
+	int y_highest_stage;
+	int y_flt_pos;
+	int y_abs_pos;
+	int left_ep;
+	int left_ep_val;
+	int right_ep;
+	int right_ep_val;
+	int top_ep;
+	int top_ep_val;
+	int bottom_ep;
+	int bottom_ep_val;
+	enum ad714x_device_state state;
+	struct input_dev *input;
+};
+
+struct ad714x_button_drv {
+	enum ad714x_device_state state;
+	/*
+	 * Unlike slider/wheel/touchpad, all buttons point to
+	 * same input_dev instance
+	 */
+	struct input_dev *input;
+};
+
+struct ad714x_driver_data {
+	struct ad714x_slider_drv *slider;
+	struct ad714x_wheel_drv *wheel;
+	struct ad714x_touchpad_drv *touchpad;
+	struct ad714x_button_drv *button;
+};
+
+/*
+ * information to integrate all things which will be private data
+ * of spi/i2c device
+ */
+struct ad714x_chip {
+	unsigned short h_state;
+	unsigned short l_state;
+	unsigned short c_state;
+	unsigned short adc_reg[STAGE_NUM];
+	unsigned short amb_reg[STAGE_NUM];
+	unsigned short sensor_val[STAGE_NUM];
+
+	struct ad714x_platform_data *hw;
+	struct ad714x_driver_data *sw;
+
+	int irq;
+	struct device *dev;
+	ad714x_read_t read;
+	ad714x_write_t write;
+
+	struct mutex mutex;
+
+	unsigned product;
+	unsigned version;
+};
+
+static void ad714x_use_com_int(struct ad714x_chip *ad714x,
+				int start_stage, int end_stage)
+{
+	unsigned short data;
+	unsigned short mask;
+
+	mask = ((1 << (end_stage + 1)) - 1) - (1 << start_stage);
+
+	ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data);
+	data |= 1 << start_stage;
+	ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data);
+
+	ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data);
+	data &= ~mask;
+	ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data);
+}
+
+static void ad714x_use_thr_int(struct ad714x_chip *ad714x,
+				int start_stage, int end_stage)
+{
+	unsigned short data;
+	unsigned short mask;
+
+	mask = ((1 << (end_stage + 1)) - 1) - (1 << start_stage);
+
+	ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data);
+	data &= ~(1 << start_stage);
+	ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data);
+
+	ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data);
+	data |= mask;
+	ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data);
+}
+
+static int ad714x_cal_highest_stage(struct ad714x_chip *ad714x,
+					int start_stage, int end_stage)
+{
+	int max_res = 0;
+	int max_idx = 0;
+	int i;
+
+	for (i = start_stage; i <= end_stage; i++) {
+		if (ad714x->sensor_val[i] > max_res) {
+			max_res = ad714x->sensor_val[i];
+			max_idx = i;
+		}
+	}
+
+	return max_idx;
+}
+
+static int ad714x_cal_abs_pos(struct ad714x_chip *ad714x,
+				int start_stage, int end_stage,
+				int highest_stage, int max_coord)
+{
+	int a_param, b_param;
+
+	if (highest_stage == start_stage) {
+		a_param = ad714x->sensor_val[start_stage + 1];
+		b_param = ad714x->sensor_val[start_stage] +
+			ad714x->sensor_val[start_stage + 1];
+	} else if (highest_stage == end_stage) {
+		a_param = ad714x->sensor_val[end_stage] *
+			(end_stage - start_stage) +
+			ad714x->sensor_val[end_stage - 1] *
+			(end_stage - start_stage - 1);
+		b_param = ad714x->sensor_val[end_stage] +
+			ad714x->sensor_val[end_stage - 1];
+	} else {
+		a_param = ad714x->sensor_val[highest_stage] *
+			(highest_stage - start_stage) +
+			ad714x->sensor_val[highest_stage - 1] *
+			(highest_stage - start_stage - 1) +
+			ad714x->sensor_val[highest_stage + 1] *
+			(highest_stage - start_stage + 1);
+		b_param = ad714x->sensor_val[highest_stage] +
+			ad714x->sensor_val[highest_stage - 1] +
+			ad714x->sensor_val[highest_stage + 1];
+	}
+
+	return (max_coord / (end_stage - start_stage)) * a_param / b_param;
+}
+
+/*
+ * One button can connect to multi positive and negative of CDCs
+ * Multi-buttons can connect to same positive/negative of one CDC
+ */
+static void ad714x_button_state_machine(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_button_plat *hw = &ad714x->hw->button[idx];
+	struct ad714x_button_drv *sw = &ad714x->sw->button[idx];
+
+	switch (sw->state) {
+	case IDLE:
+		if (((ad714x->h_state & hw->h_mask) == hw->h_mask) &&
+		    ((ad714x->l_state & hw->l_mask) == hw->l_mask)) {
+			dev_dbg(ad714x->dev, "button %d touched\n", idx);
+			input_report_key(sw->input, hw->keycode, 1);
+			input_sync(sw->input);
+			sw->state = ACTIVE;
+		}
+		break;
+
+	case ACTIVE:
+		if (((ad714x->h_state & hw->h_mask) != hw->h_mask) ||
+		    ((ad714x->l_state & hw->l_mask) != hw->l_mask)) {
+			dev_dbg(ad714x->dev, "button %d released\n", idx);
+			input_report_key(sw->input, hw->keycode, 0);
+			input_sync(sw->input);
+			sw->state = IDLE;
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+/*
+ * The response of a sensor is defined by the absolute number of codes
+ * between the current CDC value and the ambient value.
+ */
+static void ad714x_slider_cal_sensor_val(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx];
+	int i;
+
+	for (i = hw->start_stage; i <= hw->end_stage; i++) {
+		ad714x->read(ad714x->dev, CDC_RESULT_S0 + i,
+			&ad714x->adc_reg[i]);
+		ad714x->read(ad714x->dev,
+				STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
+				&ad714x->amb_reg[i]);
+
+		ad714x->sensor_val[i] = abs(ad714x->adc_reg[i] -
+				ad714x->amb_reg[i]);
+	}
+}
+
+static void ad714x_slider_cal_highest_stage(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx];
+	struct ad714x_slider_drv *sw = &ad714x->sw->slider[idx];
+
+	sw->highest_stage = ad714x_cal_highest_stage(ad714x, hw->start_stage,
+			hw->end_stage);
+
+	dev_dbg(ad714x->dev, "slider %d highest_stage:%d\n", idx,
+		sw->highest_stage);
+}
+
+/*
+ * The formulae are very straight forward. It uses the sensor with the
+ * highest response and the 2 adjacent ones.
+ * When Sensor 0 has the highest response, only sensor 0 and sensor 1
+ * are used in the calculations. Similarly when the last sensor has the
+ * highest response, only the last sensor and the second last sensors
+ * are used in the calculations.
+ *
+ * For i= idx_of_peak_Sensor-1 to i= idx_of_peak_Sensor+1
+ *         v += Sensor response(i)*i
+ *         w += Sensor response(i)
+ * POS=(Number_of_Positions_Wanted/(Number_of_Sensors_Used-1)) *(v/w)
+ */
+static void ad714x_slider_cal_abs_pos(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx];
+	struct ad714x_slider_drv *sw = &ad714x->sw->slider[idx];
+
+	sw->abs_pos = ad714x_cal_abs_pos(ad714x, hw->start_stage, hw->end_stage,
+		sw->highest_stage, hw->max_coord);
+
+	dev_dbg(ad714x->dev, "slider %d absolute position:%d\n", idx,
+		sw->abs_pos);
+}
+
+/*
+ * To minimise the Impact of the noise on the algorithm, ADI developed a
+ * routine that filters the CDC results after they have been read by the
+ * host processor.
+ * The filter used is an Infinite Input Response(IIR) filter implemented
+ * in firmware and attenuates the noise on the CDC results after they've
+ * been read by the host processor.
+ * Filtered_CDC_result = (Filtered_CDC_result * (10 - Coefficient) +
+ *				Latest_CDC_result * Coefficient)/10
+ */
+static void ad714x_slider_cal_flt_pos(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_slider_drv *sw = &ad714x->sw->slider[idx];
+
+	sw->flt_pos = (sw->flt_pos * (10 - 4) +
+			sw->abs_pos * 4)/10;
+
+	dev_dbg(ad714x->dev, "slider %d filter position:%d\n", idx,
+		sw->flt_pos);
+}
+
+static void ad714x_slider_use_com_int(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx];
+
+	ad714x_use_com_int(ad714x, hw->start_stage, hw->end_stage);
+}
+
+static void ad714x_slider_use_thr_int(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx];
+
+	ad714x_use_thr_int(ad714x, hw->start_stage, hw->end_stage);
+}
+
+static void ad714x_slider_state_machine(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx];
+	struct ad714x_slider_drv *sw = &ad714x->sw->slider[idx];
+	unsigned short h_state, c_state;
+	unsigned short mask;
+
+	mask = ((1 << (hw->end_stage + 1)) - 1) - ((1 << hw->start_stage) - 1);
+
+	h_state = ad714x->h_state & mask;
+	c_state = ad714x->c_state & mask;
+
+	switch (sw->state) {
+	case IDLE:
+		if (h_state) {
+			sw->state = JITTER;
+			/* In End of Conversion interrupt mode, the AD714X
+			 * continuously generates hardware interrupts.
+			 */
+			ad714x_slider_use_com_int(ad714x, idx);
+			dev_dbg(ad714x->dev, "slider %d touched\n", idx);
+		}
+		break;
+
+	case JITTER:
+		if (c_state == mask) {
+			ad714x_slider_cal_sensor_val(ad714x, idx);
+			ad714x_slider_cal_highest_stage(ad714x, idx);
+			ad714x_slider_cal_abs_pos(ad714x, idx);
+			sw->flt_pos = sw->abs_pos;
+			sw->state = ACTIVE;
+		}
+		break;
+
+	case ACTIVE:
+		if (c_state == mask) {
+			if (h_state) {
+				ad714x_slider_cal_sensor_val(ad714x, idx);
+				ad714x_slider_cal_highest_stage(ad714x, idx);
+				ad714x_slider_cal_abs_pos(ad714x, idx);
+				ad714x_slider_cal_flt_pos(ad714x, idx);
+
+				input_report_abs(sw->input, ABS_X, sw->flt_pos);
+				input_report_key(sw->input, BTN_TOUCH, 1);
+			} else {
+				/* When the user lifts off the sensor, configure
+				 * the AD714X back to threshold interrupt mode.
+				 */
+				ad714x_slider_use_thr_int(ad714x, idx);
+				sw->state = IDLE;
+				input_report_key(sw->input, BTN_TOUCH, 0);
+				dev_dbg(ad714x->dev, "slider %d released\n",
+					idx);
+			}
+			input_sync(sw->input);
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+/*
+ * When the scroll wheel is activated, we compute the absolute position based
+ * on the sensor values. To calculate the position, we first determine the
+ * sensor that has the greatest response among the 8 sensors that constitutes
+ * the scrollwheel. Then we determined the 2 sensors on either sides of the
+ * sensor with the highest response and we apply weights to these sensors.
+ */
+static void ad714x_wheel_cal_highest_stage(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
+	struct ad714x_wheel_drv *sw = &ad714x->sw->wheel[idx];
+
+	sw->pre_highest_stage = sw->highest_stage;
+	sw->highest_stage = ad714x_cal_highest_stage(ad714x, hw->start_stage,
+			hw->end_stage);
+
+	dev_dbg(ad714x->dev, "wheel %d highest_stage:%d\n", idx,
+		sw->highest_stage);
+}
+
+static void ad714x_wheel_cal_sensor_val(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
+	int i;
+
+	for (i = hw->start_stage; i <= hw->end_stage; i++) {
+		ad714x->read(ad714x->dev, CDC_RESULT_S0 + i,
+			&ad714x->adc_reg[i]);
+		ad714x->read(ad714x->dev,
+				STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
+				&ad714x->amb_reg[i]);
+		if (ad714x->adc_reg[i] > ad714x->amb_reg[i])
+			ad714x->sensor_val[i] = ad714x->adc_reg[i] -
+				ad714x->amb_reg[i];
+		else
+			ad714x->sensor_val[i] = 0;
+	}
+}
+
+/*
+ * When the scroll wheel is activated, we compute the absolute position based
+ * on the sensor values. To calculate the position, we first determine the
+ * sensor that has the greatest response among the 8 sensors that constitutes
+ * the scrollwheel. Then we determined the 2 sensors on either sides of the
+ * sensor with the highest response and we apply weights to these sensors. The
+ * result of this computation gives us the mean value which defined by the
+ * following formula:
+ * For i= second_before_highest_stage to i= second_after_highest_stage
+ *         v += Sensor response(i)*WEIGHT*(i+3)
+ *         w += Sensor response(i)
+ * Mean_Value=v/w
+ * pos_on_scrollwheel = (Mean_Value - position_offset) / position_ratio
+ */
+
+#define WEIGHT_FACTOR 30
+/* This constant prevents the "PositionOffset" from reaching a big value */
+#define OFFSET_POSITION_CLAMP	120
+static void ad714x_wheel_cal_abs_pos(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
+	struct ad714x_wheel_drv *sw = &ad714x->sw->wheel[idx];
+	int stage_num = hw->end_stage - hw->start_stage + 1;
+	int second_before, first_before, highest, first_after, second_after;
+	int a_param, b_param;
+
+	/* Calculate Mean value */
+
+	second_before = (sw->highest_stage + stage_num - 2) % stage_num;
+	first_before = (sw->highest_stage + stage_num - 1) % stage_num;
+	highest = sw->highest_stage;
+	first_after = (sw->highest_stage + stage_num + 1) % stage_num;
+	second_after = (sw->highest_stage + stage_num + 2) % stage_num;
+
+	if (((sw->highest_stage - hw->start_stage) > 1) &&
+	    ((hw->end_stage - sw->highest_stage) > 1)) {
+		a_param = ad714x->sensor_val[second_before] *
+			(second_before - hw->start_stage + 3) +
+			ad714x->sensor_val[first_before] *
+			(second_before - hw->start_stage + 3) +
+			ad714x->sensor_val[highest] *
+			(second_before - hw->start_stage + 3) +
+			ad714x->sensor_val[first_after] *
+			(first_after - hw->start_stage + 3) +
+			ad714x->sensor_val[second_after] *
+			(second_after - hw->start_stage + 3);
+	} else {
+		a_param = ad714x->sensor_val[second_before] *
+			(second_before - hw->start_stage + 1) +
+			ad714x->sensor_val[first_before] *
+			(second_before - hw->start_stage + 2) +
+			ad714x->sensor_val[highest] *
+			(second_before - hw->start_stage + 3) +
+			ad714x->sensor_val[first_after] *
+			(first_after - hw->start_stage + 4) +
+			ad714x->sensor_val[second_after] *
+			(second_after - hw->start_stage + 5);
+	}
+	a_param *= WEIGHT_FACTOR;
+
+	b_param = ad714x->sensor_val[second_before] +
+		ad714x->sensor_val[first_before] +
+		ad714x->sensor_val[highest] +
+		ad714x->sensor_val[first_after] +
+		ad714x->sensor_val[second_after];
+
+	sw->pre_mean_value = sw->mean_value;
+	sw->mean_value = a_param / b_param;
+
+	/* Calculate the offset */
+
+	if ((sw->pre_highest_stage == hw->end_stage) &&
+			(sw->highest_stage == hw->start_stage))
+		sw->pos_offset = sw->mean_value;
+	else if ((sw->pre_highest_stage == hw->start_stage) &&
+			(sw->highest_stage == hw->end_stage))
+		sw->pos_offset = sw->pre_mean_value;
+
+	if (sw->pos_offset > OFFSET_POSITION_CLAMP)
+		sw->pos_offset = OFFSET_POSITION_CLAMP;
+
+	/* Calculate the mean value without the offset */
+
+	sw->pre_mean_value_no_offset = sw->mean_value_no_offset;
+	sw->mean_value_no_offset = sw->mean_value - sw->pos_offset;
+	if (sw->mean_value_no_offset < 0)
+		sw->mean_value_no_offset = 0;
+
+	/* Calculate ratio to scale down to NUMBER_OF_WANTED_POSITIONS */
+
+	if ((sw->pre_highest_stage == hw->end_stage) &&
+			(sw->highest_stage == hw->start_stage))
+		sw->pos_ratio = (sw->pre_mean_value_no_offset * 100) /
+			hw->max_coord;
+	else if ((sw->pre_highest_stage == hw->start_stage) &&
+			(sw->highest_stage == hw->end_stage))
+		sw->pos_ratio = (sw->mean_value_no_offset * 100) /
+			hw->max_coord;
+	sw->abs_pos = (sw->mean_value_no_offset * 100) / sw->pos_ratio;
+	if (sw->abs_pos > hw->max_coord)
+		sw->abs_pos = hw->max_coord;
+}
+
+static void ad714x_wheel_cal_flt_pos(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
+	struct ad714x_wheel_drv *sw = &ad714x->sw->wheel[idx];
+	if (((sw->pre_highest_stage == hw->end_stage) &&
+			(sw->highest_stage == hw->start_stage)) ||
+	    ((sw->pre_highest_stage == hw->start_stage) &&
+			(sw->highest_stage == hw->end_stage)))
+		sw->flt_pos = sw->abs_pos;
+	else
+		sw->flt_pos = ((sw->flt_pos * 30) + (sw->abs_pos * 71)) / 100;
+
+	if (sw->flt_pos > hw->max_coord)
+		sw->flt_pos = hw->max_coord;
+}
+
+static void ad714x_wheel_use_com_int(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
+
+	ad714x_use_com_int(ad714x, hw->start_stage, hw->end_stage);
+}
+
+static void ad714x_wheel_use_thr_int(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
+
+	ad714x_use_thr_int(ad714x, hw->start_stage, hw->end_stage);
+}
+
+static void ad714x_wheel_state_machine(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
+	struct ad714x_wheel_drv *sw = &ad714x->sw->wheel[idx];
+	unsigned short h_state, c_state;
+	unsigned short mask;
+
+	mask = ((1 << (hw->end_stage + 1)) - 1) - ((1 << hw->start_stage) - 1);
+
+	h_state = ad714x->h_state & mask;
+	c_state = ad714x->c_state & mask;
+
+	switch (sw->state) {
+	case IDLE:
+		if (h_state) {
+			sw->state = JITTER;
+			/* In End of Conversion interrupt mode, the AD714X
+			 * continuously generates hardware interrupts.
+			 */
+			ad714x_wheel_use_com_int(ad714x, idx);
+			dev_dbg(ad714x->dev, "wheel %d touched\n", idx);
+		}
+		break;
+
+	case JITTER:
+		if (c_state == mask)	{
+			ad714x_wheel_cal_sensor_val(ad714x, idx);
+			ad714x_wheel_cal_highest_stage(ad714x, idx);
+			ad714x_wheel_cal_abs_pos(ad714x, idx);
+			sw->flt_pos = sw->abs_pos;
+			sw->state = ACTIVE;
+		}
+		break;
+
+	case ACTIVE:
+		if (c_state == mask) {
+			if (h_state) {
+				ad714x_wheel_cal_sensor_val(ad714x, idx);
+				ad714x_wheel_cal_highest_stage(ad714x, idx);
+				ad714x_wheel_cal_abs_pos(ad714x, idx);
+				ad714x_wheel_cal_flt_pos(ad714x, idx);
+
+				input_report_abs(sw->input, ABS_WHEEL,
+					sw->abs_pos);
+				input_report_key(sw->input, BTN_TOUCH, 1);
+			} else {
+				/* When the user lifts off the sensor, configure
+				 * the AD714X back to threshold interrupt mode.
+				 */
+				ad714x_wheel_use_thr_int(ad714x, idx);
+				sw->state = IDLE;
+				input_report_key(sw->input, BTN_TOUCH, 0);
+
+				dev_dbg(ad714x->dev, "wheel %d released\n",
+					idx);
+			}
+			input_sync(sw->input);
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void touchpad_cal_sensor_val(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
+	int i;
+
+	for (i = hw->x_start_stage; i <= hw->x_end_stage; i++) {
+		ad714x->read(ad714x->dev, CDC_RESULT_S0 + i,
+				&ad714x->adc_reg[i]);
+		ad714x->read(ad714x->dev,
+				STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
+				&ad714x->amb_reg[i]);
+		if (ad714x->adc_reg[i] > ad714x->amb_reg[i])
+			ad714x->sensor_val[i] = ad714x->adc_reg[i] -
+				ad714x->amb_reg[i];
+		else
+			ad714x->sensor_val[i] = 0;
+	}
+}
+
+static void touchpad_cal_highest_stage(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
+	struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx];
+
+	sw->x_highest_stage = ad714x_cal_highest_stage(ad714x,
+		hw->x_start_stage, hw->x_end_stage);
+	sw->y_highest_stage = ad714x_cal_highest_stage(ad714x,
+		hw->y_start_stage, hw->y_end_stage);
+
+	dev_dbg(ad714x->dev,
+		"touchpad %d x_highest_stage:%d, y_highest_stage:%d\n",
+		idx, sw->x_highest_stage, sw->y_highest_stage);
+}
+
+/*
+ * If 2 fingers are touching the sensor then 2 peaks can be observed in the
+ * distribution.
+ * The arithmetic doesn't support to get absolute coordinates for multi-touch
+ * yet.
+ */
+static int touchpad_check_second_peak(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
+	struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx];
+	int i;
+
+	for (i = hw->x_start_stage; i < sw->x_highest_stage; i++) {
+		if ((ad714x->sensor_val[i] - ad714x->sensor_val[i + 1])
+			> (ad714x->sensor_val[i + 1] / 10))
+			return 1;
+	}
+
+	for (i = sw->x_highest_stage; i < hw->x_end_stage; i++) {
+		if ((ad714x->sensor_val[i + 1] - ad714x->sensor_val[i])
+			> (ad714x->sensor_val[i] / 10))
+			return 1;
+	}
+
+	for (i = hw->y_start_stage; i < sw->y_highest_stage; i++) {
+		if ((ad714x->sensor_val[i] - ad714x->sensor_val[i + 1])
+			> (ad714x->sensor_val[i + 1] / 10))
+			return 1;
+	}
+
+	for (i = sw->y_highest_stage; i < hw->y_end_stage; i++) {
+		if ((ad714x->sensor_val[i + 1] - ad714x->sensor_val[i])
+			> (ad714x->sensor_val[i] / 10))
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * If only one finger is used to activate the touch pad then only 1 peak will be
+ * registered in the distribution. This peak and the 2 adjacent sensors will be
+ * used in the calculation of the absolute position. This will prevent hand
+ * shadows to affect the absolute position calculation.
+ */
+static void touchpad_cal_abs_pos(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
+	struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx];
+
+	sw->x_abs_pos = ad714x_cal_abs_pos(ad714x, hw->x_start_stage,
+			hw->x_end_stage, sw->x_highest_stage, hw->x_max_coord);
+	sw->y_abs_pos = ad714x_cal_abs_pos(ad714x, hw->y_start_stage,
+			hw->y_end_stage, sw->y_highest_stage, hw->y_max_coord);
+
+	dev_dbg(ad714x->dev, "touchpad %d absolute position:(%d, %d)\n", idx,
+			sw->x_abs_pos, sw->y_abs_pos);
+}
+
+static void touchpad_cal_flt_pos(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx];
+
+	sw->x_flt_pos = (sw->x_flt_pos * (10 - 4) +
+			sw->x_abs_pos * 4)/10;
+	sw->y_flt_pos = (sw->y_flt_pos * (10 - 4) +
+			sw->y_abs_pos * 4)/10;
+
+	dev_dbg(ad714x->dev, "touchpad %d filter position:(%d, %d)\n",
+			idx, sw->x_flt_pos, sw->y_flt_pos);
+}
+
+/*
+ * To prevent distortion from showing in the absolute position, it is
+ * necessary to detect the end points. When endpoints are detected, the
+ * driver stops updating the status variables with absolute positions.
+ * End points are detected on the 4 edges of the touchpad sensor. The
+ * method to detect them is the same for all 4.
+ * To detect the end points, the firmware computes the difference in
+ * percent between the sensor on the edge and the adjacent one. The
+ * difference is calculated in percent in order to make the end point
+ * detection independent of the pressure.
+ */
+
+#define LEFT_END_POINT_DETECTION_LEVEL                  550
+#define RIGHT_END_POINT_DETECTION_LEVEL                 750
+#define LEFT_RIGHT_END_POINT_DEAVTIVALION_LEVEL         850
+#define TOP_END_POINT_DETECTION_LEVEL                   550
+#define BOTTOM_END_POINT_DETECTION_LEVEL                950
+#define TOP_BOTTOM_END_POINT_DEAVTIVALION_LEVEL         700
+static int touchpad_check_endpoint(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
+	struct ad714x_touchpad_drv *sw  = &ad714x->sw->touchpad[idx];
+	int percent_sensor_diff;
+
+	/* left endpoint detect */
+	percent_sensor_diff = (ad714x->sensor_val[hw->x_start_stage] -
+			ad714x->sensor_val[hw->x_start_stage + 1]) * 100 /
+			ad714x->sensor_val[hw->x_start_stage + 1];
+	if (!sw->left_ep) {
+		if (percent_sensor_diff >= LEFT_END_POINT_DETECTION_LEVEL)  {
+			sw->left_ep = 1;
+			sw->left_ep_val =
+				ad714x->sensor_val[hw->x_start_stage + 1];
+		}
+	} else {
+		if ((percent_sensor_diff < LEFT_END_POINT_DETECTION_LEVEL) &&
+		    (ad714x->sensor_val[hw->x_start_stage + 1] >
+		     LEFT_RIGHT_END_POINT_DEAVTIVALION_LEVEL + sw->left_ep_val))
+			sw->left_ep = 0;
+	}
+
+	/* right endpoint detect */
+	percent_sensor_diff = (ad714x->sensor_val[hw->x_end_stage] -
+			ad714x->sensor_val[hw->x_end_stage - 1]) * 100 /
+			ad714x->sensor_val[hw->x_end_stage - 1];
+	if (!sw->right_ep) {
+		if (percent_sensor_diff >= RIGHT_END_POINT_DETECTION_LEVEL)  {
+			sw->right_ep = 1;
+			sw->right_ep_val =
+				ad714x->sensor_val[hw->x_end_stage - 1];
+		}
+	} else {
+		if ((percent_sensor_diff < RIGHT_END_POINT_DETECTION_LEVEL) &&
+		(ad714x->sensor_val[hw->x_end_stage - 1] >
+		LEFT_RIGHT_END_POINT_DEAVTIVALION_LEVEL + sw->right_ep_val))
+			sw->right_ep = 0;
+	}
+
+	/* top endpoint detect */
+	percent_sensor_diff = (ad714x->sensor_val[hw->y_start_stage] -
+			ad714x->sensor_val[hw->y_start_stage + 1]) * 100 /
+			ad714x->sensor_val[hw->y_start_stage + 1];
+	if (!sw->top_ep) {
+		if (percent_sensor_diff >= TOP_END_POINT_DETECTION_LEVEL)  {
+			sw->top_ep = 1;
+			sw->top_ep_val =
+				ad714x->sensor_val[hw->y_start_stage + 1];
+		}
+	} else {
+		if ((percent_sensor_diff < TOP_END_POINT_DETECTION_LEVEL) &&
+		(ad714x->sensor_val[hw->y_start_stage + 1] >
+		TOP_BOTTOM_END_POINT_DEAVTIVALION_LEVEL + sw->top_ep_val))
+			sw->top_ep = 0;
+	}
+
+	/* bottom endpoint detect */
+	percent_sensor_diff = (ad714x->sensor_val[hw->y_end_stage] -
+		ad714x->sensor_val[hw->y_end_stage - 1]) * 100 /
+		ad714x->sensor_val[hw->y_end_stage - 1];
+	if (!sw->bottom_ep) {
+		if (percent_sensor_diff >= BOTTOM_END_POINT_DETECTION_LEVEL)  {
+			sw->bottom_ep = 1;
+			sw->bottom_ep_val =
+				ad714x->sensor_val[hw->y_end_stage - 1];
+		}
+	} else {
+		if ((percent_sensor_diff < BOTTOM_END_POINT_DETECTION_LEVEL) &&
+		(ad714x->sensor_val[hw->y_end_stage - 1] >
+		 TOP_BOTTOM_END_POINT_DEAVTIVALION_LEVEL + sw->bottom_ep_val))
+			sw->bottom_ep = 0;
+	}
+
+	return sw->left_ep || sw->right_ep || sw->top_ep || sw->bottom_ep;
+}
+
+static void touchpad_use_com_int(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
+
+	ad714x_use_com_int(ad714x, hw->x_start_stage, hw->x_end_stage);
+}
+
+static void touchpad_use_thr_int(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
+
+	ad714x_use_thr_int(ad714x, hw->x_start_stage, hw->x_end_stage);
+	ad714x_use_thr_int(ad714x, hw->y_start_stage, hw->y_end_stage);
+}
+
+static void ad714x_touchpad_state_machine(struct ad714x_chip *ad714x, int idx)
+{
+	struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
+	struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx];
+	unsigned short h_state, c_state;
+	unsigned short mask;
+
+	mask = (((1 << (hw->x_end_stage + 1)) - 1) -
+		((1 << hw->x_start_stage) - 1)) +
+		(((1 << (hw->y_end_stage + 1)) - 1) -
+		((1 << hw->y_start_stage) - 1));
+
+	h_state = ad714x->h_state & mask;
+	c_state = ad714x->c_state & mask;
+
+	switch (sw->state) {
+	case IDLE:
+		if (h_state) {
+			sw->state = JITTER;
+			/* In End of Conversion interrupt mode, the AD714X
+			 * continuously generates hardware interrupts.
+			 */
+			touchpad_use_com_int(ad714x, idx);
+			dev_dbg(ad714x->dev, "touchpad %d touched\n", idx);
+		}
+		break;
+
+	case JITTER:
+		if (c_state == mask) {
+			touchpad_cal_sensor_val(ad714x, idx);
+			touchpad_cal_highest_stage(ad714x, idx);
+			if ((!touchpad_check_second_peak(ad714x, idx)) &&
+				(!touchpad_check_endpoint(ad714x, idx))) {
+				dev_dbg(ad714x->dev,
+					"touchpad%d, 2 fingers or endpoint\n",
+					idx);
+				touchpad_cal_abs_pos(ad714x, idx);
+				sw->x_flt_pos = sw->x_abs_pos;
+				sw->y_flt_pos = sw->y_abs_pos;
+				sw->state = ACTIVE;
+			}
+		}
+		break;
+
+	case ACTIVE:
+		if (c_state == mask) {
+			if (h_state) {
+				touchpad_cal_sensor_val(ad714x, idx);
+				touchpad_cal_highest_stage(ad714x, idx);
+				if ((!touchpad_check_second_peak(ad714x, idx))
+				  && (!touchpad_check_endpoint(ad714x, idx))) {
+					touchpad_cal_abs_pos(ad714x, idx);
+					touchpad_cal_flt_pos(ad714x, idx);
+					input_report_abs(sw->input, ABS_X,
+						sw->x_flt_pos);
+					input_report_abs(sw->input, ABS_Y,
+						sw->y_flt_pos);
+					input_report_key(sw->input, BTN_TOUCH,
+						1);
+				}
+			} else {
+				/* When the user lifts off the sensor, configure
+				 * the AD714X back to threshold interrupt mode.
+				 */
+				touchpad_use_thr_int(ad714x, idx);
+				sw->state = IDLE;
+				input_report_key(sw->input, BTN_TOUCH, 0);
+				dev_dbg(ad714x->dev, "touchpad %d released\n",
+					idx);
+			}
+			input_sync(sw->input);
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int ad714x_hw_detect(struct ad714x_chip *ad714x)
+{
+	unsigned short data;
+
+	ad714x->read(ad714x->dev, AD714X_PARTID_REG, &data);
+	switch (data & 0xFFF0) {
+	case AD7142_PARTID:
+		ad714x->product = 0x7142;
+		ad714x->version = data & 0xF;
+		dev_info(ad714x->dev, "found AD7142 captouch, rev:%d\n",
+				ad714x->version);
+		return 0;
+
+	case AD7143_PARTID:
+		ad714x->product = 0x7143;
+		ad714x->version = data & 0xF;
+		dev_info(ad714x->dev, "found AD7143 captouch, rev:%d\n",
+				ad714x->version);
+		return 0;
+
+	case AD7147_PARTID:
+		ad714x->product = 0x7147;
+		ad714x->version = data & 0xF;
+		dev_info(ad714x->dev, "found AD7147(A) captouch, rev:%d\n",
+				ad714x->version);
+		return 0;
+
+	case AD7148_PARTID:
+		ad714x->product = 0x7148;
+		ad714x->version = data & 0xF;
+		dev_info(ad714x->dev, "found AD7148 captouch, rev:%d\n",
+				ad714x->version);
+		return 0;
+
+	default:
+		dev_err(ad714x->dev,
+			"fail to detect AD714X captouch, read ID is %04x\n",
+			data);
+		return -ENODEV;
+	}
+}
+
+static void ad714x_hw_init(struct ad714x_chip *ad714x)
+{
+	int i, j;
+	unsigned short reg_base;
+	unsigned short data;
+
+	/* configuration CDC and interrupts */
+
+	for (i = 0; i < STAGE_NUM; i++) {
+		reg_base = AD714X_STAGECFG_REG + i * STAGE_CFGREG_NUM;
+		for (j = 0; j < STAGE_CFGREG_NUM; j++)
+			ad714x->write(ad714x->dev, reg_base + j,
+					ad714x->hw->stage_cfg_reg[i][j]);
+	}
+
+	for (i = 0; i < SYS_CFGREG_NUM; i++)
+		ad714x->write(ad714x->dev, AD714X_SYSCFG_REG + i,
+			ad714x->hw->sys_cfg_reg[i]);
+	for (i = 0; i < SYS_CFGREG_NUM; i++)
+		ad714x->read(ad714x->dev, AD714X_SYSCFG_REG + i,
+			&data);
+
+	ad714x->write(ad714x->dev, AD714X_STG_CAL_EN_REG, 0xFFF);
+
+	/* clear all interrupts */
+	ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data);
+	ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data);
+	ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data);
+}
+
+static irqreturn_t ad714x_interrupt_thread(int irq, void *data)
+{
+	struct ad714x_chip *ad714x = data;
+	int i;
+
+	mutex_lock(&ad714x->mutex);
+
+	ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &ad714x->l_state);
+	ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &ad714x->h_state);
+	ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &ad714x->c_state);
+
+	for (i = 0; i < ad714x->hw->button_num; i++)
+		ad714x_button_state_machine(ad714x, i);
+	for (i = 0; i < ad714x->hw->slider_num; i++)
+		ad714x_slider_state_machine(ad714x, i);
+	for (i = 0; i < ad714x->hw->wheel_num; i++)
+		ad714x_wheel_state_machine(ad714x, i);
+	for (i = 0; i < ad714x->hw->touchpad_num; i++)
+		ad714x_touchpad_state_machine(ad714x, i);
+
+	mutex_unlock(&ad714x->mutex);
+
+	return IRQ_HANDLED;
+}
+
+#define MAX_DEVICE_NUM 8
+struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
+				 ad714x_read_t read, ad714x_write_t write)
+{
+	int i, alloc_idx;
+	int error;
+	struct input_dev *input[MAX_DEVICE_NUM];
+
+	struct ad714x_platform_data *plat_data = dev->platform_data;
+	struct ad714x_chip *ad714x;
+	void *drv_mem;
+
+	struct ad714x_button_drv *bt_drv;
+	struct ad714x_slider_drv *sd_drv;
+	struct ad714x_wheel_drv *wl_drv;
+	struct ad714x_touchpad_drv *tp_drv;
+
+
+	if (irq <= 0) {
+		dev_err(dev, "IRQ not configured!\n");
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	if (dev->platform_data == NULL) {
+		dev_err(dev, "platform data for ad714x doesn't exist\n");
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	ad714x = kzalloc(sizeof(*ad714x) + sizeof(*ad714x->sw) +
+			 sizeof(*sd_drv) * plat_data->slider_num +
+			 sizeof(*wl_drv) * plat_data->wheel_num +
+			 sizeof(*tp_drv) * plat_data->touchpad_num +
+			 sizeof(*bt_drv) * plat_data->button_num, GFP_KERNEL);
+	if (!ad714x) {
+		error = -ENOMEM;
+		goto err_out;
+	}
+
+	ad714x->hw = plat_data;
+
+	drv_mem = ad714x + 1;
+	ad714x->sw = drv_mem;
+	drv_mem += sizeof(*ad714x->sw);
+	ad714x->sw->slider = sd_drv = drv_mem;
+	drv_mem += sizeof(*sd_drv) * ad714x->hw->slider_num;
+	ad714x->sw->wheel = wl_drv = drv_mem;
+	drv_mem += sizeof(*wl_drv) * ad714x->hw->wheel_num;
+	ad714x->sw->touchpad = tp_drv = drv_mem;
+	drv_mem += sizeof(*tp_drv) * ad714x->hw->touchpad_num;
+	ad714x->sw->button = bt_drv = drv_mem;
+	drv_mem += sizeof(*bt_drv) * ad714x->hw->button_num;
+
+	ad714x->read = read;
+	ad714x->write = write;
+	ad714x->irq = irq;
+	ad714x->dev = dev;
+
+	error = ad714x_hw_detect(ad714x);
+	if (error)
+		goto err_free_mem;
+
+	/* initilize and request sw/hw resources */
+
+	ad714x_hw_init(ad714x);
+	mutex_init(&ad714x->mutex);
+
+	/*
+	 * Allocate and register AD714X input device
+	 */
+	alloc_idx = 0;
+
+	/* a slider uses one input_dev instance */
+	if (ad714x->hw->slider_num > 0) {
+		struct ad714x_slider_plat *sd_plat = ad714x->hw->slider;
+
+		for (i = 0; i < ad714x->hw->slider_num; i++) {
+			sd_drv[i].input = input[alloc_idx] = input_allocate_device();
+			if (!input[alloc_idx]) {
+				error = -ENOMEM;
+				goto err_free_dev;
+			}
+
+			__set_bit(EV_ABS, input[alloc_idx]->evbit);
+			__set_bit(EV_KEY, input[alloc_idx]->evbit);
+			__set_bit(ABS_X, input[alloc_idx]->absbit);
+			__set_bit(BTN_TOUCH, input[alloc_idx]->keybit);
+			input_set_abs_params(input[alloc_idx],
+				ABS_X, 0, sd_plat->max_coord, 0, 0);
+
+			input[alloc_idx]->id.bustype = bus_type;
+			input[alloc_idx]->id.product = ad714x->product;
+			input[alloc_idx]->id.version = ad714x->version;
+
+			error = input_register_device(input[alloc_idx]);
+			if (error)
+				goto err_free_dev;
+
+			alloc_idx++;
+		}
+	}
+
+	/* a wheel uses one input_dev instance */
+	if (ad714x->hw->wheel_num > 0) {
+		struct ad714x_wheel_plat *wl_plat = ad714x->hw->wheel;
+
+		for (i = 0; i < ad714x->hw->wheel_num; i++) {
+			wl_drv[i].input = input[alloc_idx] = input_allocate_device();
+			if (!input[alloc_idx]) {
+				error = -ENOMEM;
+				goto err_free_dev;
+			}
+
+			__set_bit(EV_KEY, input[alloc_idx]->evbit);
+			__set_bit(EV_ABS, input[alloc_idx]->evbit);
+			__set_bit(ABS_WHEEL, input[alloc_idx]->absbit);
+			__set_bit(BTN_TOUCH, input[alloc_idx]->keybit);
+			input_set_abs_params(input[alloc_idx],
+				ABS_WHEEL, 0, wl_plat->max_coord, 0, 0);
+
+			input[alloc_idx]->id.bustype = bus_type;
+			input[alloc_idx]->id.product = ad714x->product;
+			input[alloc_idx]->id.version = ad714x->version;
+
+			error = input_register_device(input[alloc_idx]);
+			if (error)
+				goto err_free_dev;
+
+			alloc_idx++;
+		}
+	}
+
+	/* a touchpad uses one input_dev instance */
+	if (ad714x->hw->touchpad_num > 0) {
+		struct ad714x_touchpad_plat *tp_plat = ad714x->hw->touchpad;
+
+		for (i = 0; i < ad714x->hw->touchpad_num; i++) {
+			tp_drv[i].input = input[alloc_idx] = input_allocate_device();
+			if (!input[alloc_idx]) {
+				error = -ENOMEM;
+				goto err_free_dev;
+			}
+
+			__set_bit(EV_ABS, input[alloc_idx]->evbit);
+			__set_bit(EV_KEY, input[alloc_idx]->evbit);
+			__set_bit(ABS_X, input[alloc_idx]->absbit);
+			__set_bit(ABS_Y, input[alloc_idx]->absbit);
+			__set_bit(BTN_TOUCH, input[alloc_idx]->keybit);
+			input_set_abs_params(input[alloc_idx],
+				ABS_X, 0, tp_plat->x_max_coord, 0, 0);
+			input_set_abs_params(input[alloc_idx],
+				ABS_Y, 0, tp_plat->y_max_coord, 0, 0);
+
+			input[alloc_idx]->id.bustype = bus_type;
+			input[alloc_idx]->id.product = ad714x->product;
+			input[alloc_idx]->id.version = ad714x->version;
+
+			error = input_register_device(input[alloc_idx]);
+			if (error)
+				goto err_free_dev;
+
+			alloc_idx++;
+		}
+	}
+
+	/* all buttons use one input node */
+	if (ad714x->hw->button_num > 0) {
+		struct ad714x_button_plat *bt_plat = ad714x->hw->button;
+
+		input[alloc_idx] = input_allocate_device();
+		if (!input[alloc_idx]) {
+			error = -ENOMEM;
+			goto err_free_dev;
+		}
+
+		__set_bit(EV_KEY, input[alloc_idx]->evbit);
+		for (i = 0; i < ad714x->hw->button_num; i++) {
+			bt_drv[i].input = input[alloc_idx];
+			__set_bit(bt_plat[i].keycode, input[alloc_idx]->keybit);
+		}
+
+		input[alloc_idx]->id.bustype = bus_type;
+		input[alloc_idx]->id.product = ad714x->product;
+		input[alloc_idx]->id.version = ad714x->version;
+
+		error = input_register_device(input[alloc_idx]);
+		if (error)
+			goto err_free_dev;
+
+		alloc_idx++;
+	}
+
+	error = request_threaded_irq(ad714x->irq, NULL, ad714x_interrupt_thread,
+			IRQF_TRIGGER_FALLING, "ad714x_captouch", ad714x);
+	if (error) {
+		dev_err(dev, "can't allocate irq %d\n", ad714x->irq);
+		goto err_unreg_dev;
+	}
+
+	return ad714x;
+
+ err_free_dev:
+	dev_err(dev, "failed to setup AD714x input device %i\n", alloc_idx);
+	input_free_device(input[alloc_idx]);
+ err_unreg_dev:
+	while (--alloc_idx >= 0)
+		input_unregister_device(input[alloc_idx]);
+ err_free_mem:
+	kfree(ad714x);
+ err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL(ad714x_probe);
+
+void ad714x_remove(struct ad714x_chip *ad714x)
+{
+	struct ad714x_platform_data *hw = ad714x->hw;
+	struct ad714x_driver_data *sw = ad714x->sw;
+	int i;
+
+	free_irq(ad714x->irq, ad714x);
+
+	/* unregister and free all input devices */
+
+	for (i = 0; i < hw->slider_num; i++)
+		input_unregister_device(sw->slider[i].input);
+
+	for (i = 0; i < hw->wheel_num; i++)
+		input_unregister_device(sw->wheel[i].input);
+
+	for (i = 0; i < hw->touchpad_num; i++)
+		input_unregister_device(sw->touchpad[i].input);
+
+	if (hw->button_num)
+		input_unregister_device(sw->button[0].input);
+
+	kfree(ad714x);
+}
+EXPORT_SYMBOL(ad714x_remove);
+
+#ifdef CONFIG_PM
+int ad714x_disable(struct ad714x_chip *ad714x)
+{
+	unsigned short data;
+
+	dev_dbg(ad714x->dev, "%s enter\n", __func__);
+
+	mutex_lock(&ad714x->mutex);
+
+	data = ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL] | 0x3;
+	ad714x->write(ad714x->dev, AD714X_PWR_CTRL, data);
+
+	mutex_unlock(&ad714x->mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(ad714x_disable);
+
+int ad714x_enable(struct ad714x_chip *ad714x)
+{
+	unsigned short data;
+
+	dev_dbg(ad714x->dev, "%s enter\n", __func__);
+
+	mutex_lock(&ad714x->mutex);
+
+	/* resume to non-shutdown mode */
+
+	ad714x->write(ad714x->dev, AD714X_PWR_CTRL,
+			ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL]);
+
+	/* make sure the interrupt output line is not low level after resume,
+	 * otherwise we will get no chance to enter falling-edge irq again
+	 */
+
+	ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data);
+	ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data);
+	ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data);
+
+	mutex_unlock(&ad714x->mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(ad714x_enable);
+#endif
+
+MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor Driver");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/ad714x.h b/drivers/input/misc/ad714x.h
new file mode 100644
index 00000000000..45c54fb13f0
--- /dev/null
+++ b/drivers/input/misc/ad714x.h
@@ -0,0 +1,26 @@
+/*
+ * AD714X CapTouch Programmable Controller driver (bus interfaces)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _AD714X_H_
+#define _AD714X_H_
+
+#include <linux/types.h>
+
+struct device;
+struct ad714x_chip;
+
+typedef int (*ad714x_read_t)(struct device *, unsigned short, unsigned short *);
+typedef int (*ad714x_write_t)(struct device *, unsigned short, unsigned short);
+
+int ad714x_disable(struct ad714x_chip *ad714x);
+int ad714x_enable(struct ad714x_chip *ad714x);
+struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
+				 ad714x_read_t read, ad714x_write_t write);
+void ad714x_remove(struct ad714x_chip *ad714x);
+
+#endif
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
new file mode 100644
index 00000000000..5c3ac4e0b05
--- /dev/null
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -0,0 +1,227 @@
+/*
+ * Driver for a keypad w/16 buttons connected to a PCF8574 I2C I/O expander
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define DRV_NAME "pcf8574_keypad"
+
+static const unsigned char pcf8574_kp_btncode[] = {
+	[0] = KEY_RESERVED,
+	[1] = KEY_ENTER,
+	[2] = KEY_BACKSLASH,
+	[3] = KEY_0,
+	[4] = KEY_RIGHTBRACE,
+	[5] = KEY_C,
+	[6] = KEY_9,
+	[7] = KEY_8,
+	[8] = KEY_7,
+	[9] = KEY_B,
+	[10] = KEY_6,
+	[11] = KEY_5,
+	[12] = KEY_4,
+	[13] = KEY_A,
+	[14] = KEY_3,
+	[15] = KEY_2,
+	[16] = KEY_1
+};
+
+struct kp_data {
+	unsigned short btncode[ARRAY_SIZE(pcf8574_kp_btncode)];
+	struct input_dev *idev;
+	struct i2c_client *client;
+	char name[64];
+	char phys[32];
+	unsigned char laststate;
+};
+
+static short read_state(struct kp_data *lp)
+{
+	unsigned char x, y, a, b;
+
+	i2c_smbus_write_byte(lp->client, 240);
+	x = 0xF & (~(i2c_smbus_read_byte(lp->client) >> 4));
+
+	i2c_smbus_write_byte(lp->client, 15);
+	y = 0xF & (~i2c_smbus_read_byte(lp->client));
+
+	for (a = 0; x > 0; a++)
+		x = x >> 1;
+	for (b = 0; y > 0; b++)
+		y = y >> 1;
+
+	return ((a - 1) * 4) + b;
+}
+
+static irqreturn_t pcf8574_kp_irq_handler(int irq, void *dev_id)
+{
+	struct kp_data *lp = dev_id;
+	unsigned char nextstate = read_state(lp);
+
+	if (lp->laststate != nextstate) {
+		int key_down = nextstate <= ARRAY_SIZE(lp->btncode);
+		unsigned short keycode = key_down ?
+			lp->btncode[nextstate] : lp->btncode[lp->laststate];
+
+		input_report_key(lp->idev, keycode, key_down);
+		input_sync(lp->idev);
+
+		lp->laststate = nextstate;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit pcf8574_kp_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int i, ret;
+	struct input_dev *idev;
+	struct kp_data *lp;
+
+	if (i2c_smbus_write_byte(client, 240) < 0) {
+		dev_err(&client->dev, "probe: write fail\n");
+		return -ENODEV;
+	}
+
+	lp = kzalloc(sizeof(*lp), GFP_KERNEL);
+	if (!lp)
+		return -ENOMEM;
+
+	idev = input_allocate_device();
+	if (!idev) {
+		dev_err(&client->dev, "Can't allocate input device\n");
+		ret = -ENOMEM;
+		goto fail_allocate;
+	}
+
+	lp->idev = idev;
+	lp->client = client;
+
+	idev->evbit[0] = BIT_MASK(EV_KEY);
+	idev->keycode = lp->btncode;
+	idev->keycodesize = sizeof(lp->btncode[0]);
+	idev->keycodemax = ARRAY_SIZE(lp->btncode);
+
+	for (i = 0; i < ARRAY_SIZE(pcf8574_kp_btncode); i++) {
+		lp->btncode[i] = pcf8574_kp_btncode[i];
+		__set_bit(lp->btncode[i] & KEY_MAX, idev->keybit);
+	}
+
+	sprintf(lp->name, DRV_NAME);
+	sprintf(lp->phys, "kp_data/input0");
+
+	idev->name = lp->name;
+	idev->phys = lp->phys;
+	idev->id.bustype = BUS_I2C;
+	idev->id.vendor = 0x0001;
+	idev->id.product = 0x0001;
+	idev->id.version = 0x0100;
+
+	input_set_drvdata(idev, lp);
+
+	ret = input_register_device(idev);
+	if (ret) {
+		dev_err(&client->dev, "input_register_device() failed\n");
+		goto fail_register;
+	}
+
+	lp->laststate = read_state(lp);
+
+	ret = request_threaded_irq(client->irq, NULL, pcf8574_kp_irq_handler,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   DRV_NAME, lp);
+	if (ret) {
+		dev_err(&client->dev, "IRQ %d is not free\n", client->irq);
+		goto fail_irq;
+	}
+
+	i2c_set_clientdata(client, lp);
+	return 0;
+
+ fail_irq:
+	input_unregister_device(idev);
+ fail_register:
+	input_set_drvdata(idev, NULL);
+	input_free_device(idev);
+ fail_allocate:
+	kfree(lp);
+
+	return ret;
+}
+
+static int __devexit pcf8574_kp_remove(struct i2c_client *client)
+{
+	struct kp_data *lp = i2c_get_clientdata(client);
+
+	free_irq(client->irq, lp);
+
+	input_unregister_device(lp->idev);
+	kfree(lp);
+
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcf8574_kp_resume(struct i2c_client *client)
+{
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static int pcf8574_kp_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	disable_irq(client->irq);
+
+	return 0;
+}
+#else
+# define pcf8574_kp_resume  NULL
+# define pcf8574_kp_suspend NULL
+#endif
+
+static const struct i2c_device_id pcf8574_kp_id[] = {
+	{ DRV_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8574_kp_id);
+
+static struct i2c_driver pcf8574_kp_driver = {
+	.driver = {
+		.name  = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe    = pcf8574_kp_probe,
+	.remove   = __devexit_p(pcf8574_kp_remove),
+	.suspend  = pcf8574_kp_suspend,
+	.resume   = pcf8574_kp_resume,
+	.id_table = pcf8574_kp_id,
+};
+
+static int __init pcf8574_kp_init(void)
+{
+	return i2c_add_driver(&pcf8574_kp_driver);
+}
+module_init(pcf8574_kp_init);
+
+static void __exit pcf8574_kp_exit(void)
+{
+	i2c_del_driver(&pcf8574_kp_driver);
+}
+module_exit(pcf8574_kp_exit);
+
+MODULE_AUTHOR("Michael Hennerich");
+MODULE_DESCRIPTION("Keypad input driver for 16 keys connected to PCF8574");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 04d5a4a3181..4dac8b79fcd 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -983,11 +983,11 @@ static int __init copy_keymap(void)
 	for (key = keymap; key->type != KE_END; key++)
 		length++;
 
-	new_keymap = kmalloc(length * sizeof(struct key_entry), GFP_KERNEL);
+	new_keymap = kmemdup(keymap, length * sizeof(struct key_entry),
+			     GFP_KERNEL);
 	if (!new_keymap)
 		return -ENOMEM;
 
-	memcpy(new_keymap, keymap, length * sizeof(struct key_entry));
 	keymap = new_keymap;
 
 	return 0;
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index c714ca2407f..eeb58c1cac1 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -17,7 +17,7 @@ config MOUSE_PS2
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86
+	select SERIO_I8042 if X86 && !X86_MRST
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you have a PS/2 mouse connected to your system. This
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 112b4ee52ff..b18862b2a70 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -10,6 +10,8 @@
  * Trademarks are the property of their respective owners.
  */
 
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -19,10 +21,10 @@
 #include "psmouse.h"
 #include "elantech.h"
 
-#define elantech_debug(format, arg...)				\
-	do {							\
-		if (etd->debug)					\
-			printk(KERN_DEBUG format, ##arg);	\
+#define elantech_debug(fmt, ...)					\
+	do {								\
+		if (etd->debug)						\
+			printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__);	\
 	} while (0)
 
 static bool force_elantech;
@@ -37,7 +39,7 @@ static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c,
 {
 	if (psmouse_sliced_command(psmouse, c) ||
 	    ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
-		pr_err("elantech.c: synaptics_send_cmd query 0x%02x failed.\n", c);
+		pr_err("synaptics_send_cmd query 0x%02x failed.\n", c);
 		return -1;
 	}
 
@@ -60,13 +62,13 @@ static int elantech_ps2_command(struct psmouse *psmouse,
 		if (rc == 0)
 			break;
 		tries--;
-		elantech_debug("elantech.c: retrying ps2 command 0x%02x (%d).\n",
-			command, tries);
+		elantech_debug("retrying ps2 command 0x%02x (%d).\n",
+				command, tries);
 		msleep(ETP_PS2_COMMAND_DELAY);
 	} while (tries > 0);
 
 	if (rc)
-		pr_err("elantech.c: ps2 command 0x%02x failed.\n", command);
+		pr_err("ps2 command 0x%02x failed.\n", command);
 
 	return rc;
 }
@@ -108,7 +110,7 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
 	}
 
 	if (rc)
-		pr_err("elantech.c: failed to read register 0x%02x.\n", reg);
+		pr_err("failed to read register 0x%02x.\n", reg);
 	else
 		*val = param[0];
 
@@ -154,7 +156,7 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
 	}
 
 	if (rc)
-		pr_err("elantech.c: failed to write register 0x%02x with value 0x%02x.\n",
+		pr_err("failed to write register 0x%02x with value 0x%02x.\n",
 			reg, val);
 
 	return rc;
@@ -167,7 +169,7 @@ static void elantech_packet_dump(unsigned char *packet, int size)
 {
 	int	i;
 
-	printk(KERN_DEBUG "elantech.c: PS/2 packet [");
+	printk(KERN_DEBUG pr_fmt("PS/2 packet ["));
 	for (i = 0; i < size; i++)
 		printk("%s0x%02x ", (i) ? ", " : " ", packet[i]);
 	printk("]\n");
@@ -203,7 +205,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 	if (etd->jumpy_cursor) {
 		/* Discard packets that are likely to have bogus coordinates */
 		if (fingers > old_fingers) {
-			elantech_debug("elantech.c: discarding packet\n");
+			elantech_debug("discarding packet\n");
 			goto discard_packet_v1;
 		}
 	}
@@ -413,23 +415,21 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 			if (rc == 0)
 				break;
 			tries--;
-			elantech_debug("elantech.c: retrying read (%d).\n",
-					tries);
+			elantech_debug("retrying read (%d).\n", tries);
 			msleep(ETP_READ_BACK_DELAY);
 		} while (tries > 0);
 
 		if (rc) {
-			pr_err("elantech.c: failed to read back register 0x10.\n");
+			pr_err("failed to read back register 0x10.\n");
 		} else if (etd->hw_version == 1 &&
 			   !(val & ETP_R10_ABSOLUTE_MODE)) {
-			pr_err("elantech.c: touchpad refuses "
-				"to switch to absolute mode.\n");
+			pr_err("touchpad refuses to switch to absolute mode.\n");
 			rc = -1;
 		}
 	}
 
 	if (rc)
-		pr_err("elantech.c: failed to initialise registers.\n");
+		pr_err("failed to initialise registers.\n");
 
 	return rc;
 }
@@ -575,6 +575,24 @@ static struct attribute_group elantech_attr_group = {
 	.attrs = elantech_attrs,
 };
 
+static bool elantech_is_signature_valid(const unsigned char *param)
+{
+	static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 };
+	int i;
+
+	if (param[0] == 0)
+		return false;
+
+	if (param[1] == 0)
+		return true;
+
+	for (i = 0; i < ARRAY_SIZE(rates); i++)
+		if (param[2] == rates[i])
+			return false;
+
+	return true;
+}
+
 /*
  * Use magic knock to detect Elantech touchpad
  */
@@ -590,7 +608,7 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
 	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
-		pr_debug("elantech.c: sending Elantech magic knock failed.\n");
+		pr_debug("sending Elantech magic knock failed.\n");
 		return -1;
 	}
 
@@ -599,8 +617,7 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
 	 * set of magic numbers
 	 */
 	if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
-		pr_debug("elantech.c: "
-			 "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+		pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
 			 param[0], param[1], param[2]);
 		return -1;
 	}
@@ -611,20 +628,20 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
 	 * to Elantech magic knock and there might be more.
 	 */
 	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
-		pr_debug("elantech.c: failed to query firmware version.\n");
+		pr_debug("failed to query firmware version.\n");
 		return -1;
 	}
 
-	pr_debug("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+	pr_debug("Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
 		 param[0], param[1], param[2]);
 
-	if (param[0] == 0 || param[1] != 0) {
+	if (!elantech_is_signature_valid(param)) {
 		if (!force_elantech) {
-			pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
+			pr_debug("Probably not a real Elantech touchpad. Aborting.\n");
 			return -1;
 		}
 
-		pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
+		pr_debug("Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
 	}
 
 	if (set_properties) {
@@ -655,7 +672,7 @@ static int elantech_reconnect(struct psmouse *psmouse)
 		return -1;
 
 	if (elantech_set_absolute_mode(psmouse)) {
-		pr_err("elantech.c: failed to put touchpad back into absolute mode.\n");
+		pr_err("failed to put touchpad back into absolute mode.\n");
 		return -1;
 	}
 
@@ -683,7 +700,7 @@ int elantech_init(struct psmouse *psmouse)
 	 * Do the version query again so we can store the result
 	 */
 	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
-		pr_err("elantech.c: failed to query firmware version.\n");
+		pr_err("failed to query firmware version.\n");
 		goto init_fail;
 	}
 
@@ -704,14 +721,14 @@ int elantech_init(struct psmouse *psmouse)
 		etd->paritycheck = 1;
 	}
 
-	pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d.%d\n",
+	pr_info("assuming hardware version %d, firmware version %d.%d.%d\n",
 		etd->hw_version, param[0], param[1], param[2]);
 
 	if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) {
-		pr_err("elantech.c: failed to query capabilities.\n");
+		pr_err("failed to query capabilities.\n");
 		goto init_fail;
 	}
-	pr_info("elantech.c: Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
+	pr_info("Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
 		param[0], param[1], param[2]);
 	etd->capabilities = param[0];
 
@@ -721,13 +738,12 @@ int elantech_init(struct psmouse *psmouse)
 	 * to jump. Enable a workaround.
 	 */
 	if (etd->fw_version == 0x020022) {
-		pr_info("elantech.c: firmware version 2.0.34 detected, "
-			"enabling jumpy cursor workaround\n");
+		pr_info("firmware version 2.0.34 detected, enabling jumpy cursor workaround\n");
 		etd->jumpy_cursor = 1;
 	}
 
 	if (elantech_set_absolute_mode(psmouse)) {
-		pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
+		pr_err("failed to put touchpad into absolute mode.\n");
 		goto init_fail;
 	}
 
@@ -736,8 +752,7 @@ int elantech_init(struct psmouse *psmouse)
 	error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
 				   &elantech_attr_group);
 	if (error) {
-		pr_err("elantech.c: failed to create sysfs attributes, error: %d.\n",
-			error);
+		pr_err("failed to create sysfs attributes, error: %d.\n", error);
 		goto init_fail;
 	}
 
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 08d66d820d2..1d2205b2480 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -40,8 +40,8 @@
 #include "psmouse.h"
 #include "hgpk.h"
 
-static int tpdebug;
-module_param(tpdebug, int, 0644);
+static bool tpdebug;
+module_param(tpdebug, bool, 0644);
 MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
 
 static int recalib_delta = 100;
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 543c240a85f..c9983aee908 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -56,36 +56,36 @@ static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse)
 		/* Logitech extended packet */
 		switch ((packet[1] >> 4) | (packet[0] & 0x30)) {
 
-			case 0x0d: /* Mouse extra info */
+		case 0x0d: /* Mouse extra info */
 
-				input_report_rel(dev, packet[2] & 0x80 ? REL_HWHEEL : REL_WHEEL,
-					(int) (packet[2] & 8) - (int) (packet[2] & 7));
-				input_report_key(dev, BTN_SIDE, (packet[2] >> 4) & 1);
-				input_report_key(dev, BTN_EXTRA, (packet[2] >> 5) & 1);
+			input_report_rel(dev, packet[2] & 0x80 ? REL_HWHEEL : REL_WHEEL,
+				(int) (packet[2] & 8) - (int) (packet[2] & 7));
+			input_report_key(dev, BTN_SIDE, (packet[2] >> 4) & 1);
+			input_report_key(dev, BTN_EXTRA, (packet[2] >> 5) & 1);
 
-				break;
+			break;
 
-			case 0x0e: /* buttons 4, 5, 6, 7, 8, 9, 10 info */
+		case 0x0e: /* buttons 4, 5, 6, 7, 8, 9, 10 info */
 
-				input_report_key(dev, BTN_SIDE, (packet[2]) & 1);
-				input_report_key(dev, BTN_EXTRA, (packet[2] >> 1) & 1);
-				input_report_key(dev, BTN_BACK, (packet[2] >> 3) & 1);
-				input_report_key(dev, BTN_FORWARD, (packet[2] >> 4) & 1);
-				input_report_key(dev, BTN_TASK, (packet[2] >> 2) & 1);
+			input_report_key(dev, BTN_SIDE, (packet[2]) & 1);
+			input_report_key(dev, BTN_EXTRA, (packet[2] >> 1) & 1);
+			input_report_key(dev, BTN_BACK, (packet[2] >> 3) & 1);
+			input_report_key(dev, BTN_FORWARD, (packet[2] >> 4) & 1);
+			input_report_key(dev, BTN_TASK, (packet[2] >> 2) & 1);
 
-				break;
+			break;
 
-			case 0x0f: /* TouchPad extra info */
+		case 0x0f: /* TouchPad extra info */
 
-				input_report_rel(dev, packet[2] & 0x08 ? REL_HWHEEL : REL_WHEEL,
-					(int) ((packet[2] >> 4) & 8) - (int) ((packet[2] >> 4) & 7));
-				packet[0] = packet[2] | 0x08;
-				break;
+			input_report_rel(dev, packet[2] & 0x08 ? REL_HWHEEL : REL_WHEEL,
+				(int) ((packet[2] >> 4) & 8) - (int) ((packet[2] >> 4) & 7));
+			packet[0] = packet[2] | 0x08;
+			break;
 
 #ifdef DEBUG
-			default:
-				printk(KERN_WARNING "psmouse.c: Received PS2++ packet #%x, but don't know how to handle.\n",
-					(packet[1] >> 4) | (packet[0] & 0x30));
+		default:
+			printk(KERN_WARNING "psmouse.c: Received PS2++ packet #%x, but don't know how to handle.\n",
+				(packet[1] >> 4) | (packet[0] & 0x30));
 #endif
 		}
 	} else {
@@ -250,7 +250,6 @@ static const struct ps2pp_info *get_model_info(unsigned char model)
 		if (model == ps2pp_list[i].model)
 			return &ps2pp_list[i];
 
-	printk(KERN_WARNING "logips2pp: Detected unknown logitech mouse model %d\n", model);
 	return NULL;
 }
 
@@ -285,31 +284,32 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse,
 		__set_bit(REL_HWHEEL, input_dev->relbit);
 
 	switch (model_info->kind) {
-		case PS2PP_KIND_WHEEL:
-			psmouse->name = "Wheel Mouse";
-			break;
-
-		case PS2PP_KIND_MX:
-			psmouse->name = "MX Mouse";
-			break;
 
-		case PS2PP_KIND_TP3:
-			psmouse->name = "TouchPad 3";
-			break;
-
-		case PS2PP_KIND_TRACKMAN:
-			psmouse->name = "TrackMan";
-			break;
-
-		default:
-			/*
-			 * Set name to "Mouse" only when using PS2++,
-			 * otherwise let other protocols define suitable
-			 * name
-			 */
-			if (using_ps2pp)
-				psmouse->name = "Mouse";
-			break;
+	case PS2PP_KIND_WHEEL:
+		psmouse->name = "Wheel Mouse";
+		break;
+
+	case PS2PP_KIND_MX:
+		psmouse->name = "MX Mouse";
+		break;
+
+	case PS2PP_KIND_TP3:
+		psmouse->name = "TouchPad 3";
+		break;
+
+	case PS2PP_KIND_TRACKMAN:
+		psmouse->name = "TrackMan";
+		break;
+
+	default:
+		/*
+		 * Set name to "Mouse" only when using PS2++,
+		 * otherwise let other protocols define suitable
+		 * name
+		 */
+		if (using_ps2pp)
+			psmouse->name = "Mouse";
+		break;
 	}
 }
 
@@ -343,7 +343,8 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties)
 	if (!model || !buttons)
 		return -1;
 
-	if ((model_info = get_model_info(model)) != NULL) {
+	model_info = get_model_info(model);
+	if (model_info) {
 
 /*
  * Do Logitech PS2++ / PS2T++ magic init.
@@ -379,6 +380,9 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties)
 				use_ps2pp = true;
 			}
 		}
+
+	} else {
+		printk(KERN_WARNING "logips2pp: Detected unknown logitech mouse model %d\n", model);
 	}
 
 	if (set_properties) {
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index a3c97315a47..979c5021528 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -147,18 +147,18 @@ static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
 
 	if (psmouse->type == PSMOUSE_IMEX) {
 		switch (packet[3] & 0xC0) {
-			case 0x80: /* vertical scroll on IntelliMouse Explorer 4.0 */
-				input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 32) - (int) (packet[3] & 31));
-				break;
-			case 0x40: /* horizontal scroll on IntelliMouse Explorer 4.0 */
-				input_report_rel(dev, REL_HWHEEL, (int) (packet[3] & 32) - (int) (packet[3] & 31));
-				break;
-			case 0x00:
-			case 0xC0:
-				input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 8) - (int) (packet[3] & 7));
-				input_report_key(dev, BTN_SIDE, (packet[3] >> 4) & 1);
-				input_report_key(dev, BTN_EXTRA, (packet[3] >> 5) & 1);
-				break;
+		case 0x80: /* vertical scroll on IntelliMouse Explorer 4.0 */
+			input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 32) - (int) (packet[3] & 31));
+			break;
+		case 0x40: /* horizontal scroll on IntelliMouse Explorer 4.0 */
+			input_report_rel(dev, REL_HWHEEL, (int) (packet[3] & 32) - (int) (packet[3] & 31));
+			break;
+		case 0x00:
+		case 0xC0:
+			input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 8) - (int) (packet[3] & 7));
+			input_report_key(dev, BTN_SIDE, (packet[3] >> 4) & 1);
+			input_report_key(dev, BTN_EXTRA, (packet[3] >> 5) & 1);
+			break;
 		}
 	}
 
@@ -247,31 +247,31 @@ static int psmouse_handle_byte(struct psmouse *psmouse)
 	psmouse_ret_t rc = psmouse->protocol_handler(psmouse);
 
 	switch (rc) {
-		case PSMOUSE_BAD_DATA:
-			if (psmouse->state == PSMOUSE_ACTIVATED) {
-				printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n",
-					psmouse->name, psmouse->phys, psmouse->pktcnt);
-				if (++psmouse->out_of_sync_cnt == psmouse->resetafter) {
-					__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
-					printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
-					serio_reconnect(psmouse->ps2dev.serio);
-					return -1;
-				}
-			}
-			psmouse->pktcnt = 0;
-			break;
-
-		case PSMOUSE_FULL_PACKET:
-			psmouse->pktcnt = 0;
-			if (psmouse->out_of_sync_cnt) {
-				psmouse->out_of_sync_cnt = 0;
-				printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n",
-					psmouse->name, psmouse->phys);
+	case PSMOUSE_BAD_DATA:
+		if (psmouse->state == PSMOUSE_ACTIVATED) {
+			printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n",
+				psmouse->name, psmouse->phys, psmouse->pktcnt);
+			if (++psmouse->out_of_sync_cnt == psmouse->resetafter) {
+				__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+				printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
+				serio_reconnect(psmouse->ps2dev.serio);
+				return -1;
 			}
-			break;
+		}
+		psmouse->pktcnt = 0;
+		break;
+
+	case PSMOUSE_FULL_PACKET:
+		psmouse->pktcnt = 0;
+		if (psmouse->out_of_sync_cnt) {
+			psmouse->out_of_sync_cnt = 0;
+			printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n",
+				psmouse->name, psmouse->phys);
+		}
+		break;
 
-		case PSMOUSE_GOOD_DATA:
-			break;
+	case PSMOUSE_GOOD_DATA:
+		break;
 	}
 	return 0;
 }
@@ -1245,7 +1245,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse,
 	psmouse->pktsize = 3;
 
 	if (proto && (proto->detect || proto->init)) {
-		if (proto->detect && proto->detect(psmouse, 1) < 0)
+		if (proto->detect && proto->detect(psmouse, true) < 0)
 			return -1;
 
 		if (proto->init && proto->init(psmouse) < 0)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index ebd7a99efea..40cea334ad1 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -36,6 +36,8 @@
  * The x/y limits are taken from the Synaptics TouchPad interfacing Guide,
  * section 2.3.2, which says that they should be valid regardless of the
  * actual size of the sensor.
+ * Note that newer firmware allows querying device for maximum useable
+ * coordinates.
  */
 #define XMIN_NOMINAL 1472
 #define XMAX_NOMINAL 5472
@@ -194,23 +196,33 @@ static int synaptics_identify(struct psmouse *psmouse)
 }
 
 /*
- * Read touchpad resolution
+ * Read touchpad resolution and maximum reported coordinates
  * Resolution is left zero if touchpad does not support the query
  */
 static int synaptics_resolution(struct psmouse *psmouse)
 {
 	struct synaptics_data *priv = psmouse->private;
 	unsigned char res[3];
+	unsigned char max[3];
 
 	if (SYN_ID_MAJOR(priv->identity) < 4)
-		return 0;
 
-	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res))
-		return 0;
+	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
+		if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
+			priv->x_res = res[0]; /* x resolution in units/mm */
+			priv->y_res = res[2]; /* y resolution in units/mm */
+		}
+	}
 
-	if ((res[0] != 0) && (res[1] & 0x80) && (res[2] != 0)) {
-		priv->x_res = res[0]; /* x resolution in units/mm */
-		priv->y_res = res[2]; /* y resolution in units/mm */
+	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
+	    SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
+		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_DIMENSIONS, max)) {
+			printk(KERN_ERR "Synaptics claims to have dimensions query,"
+			       " but I'm not able to read it.\n");
+		} else {
+			priv->x_max = (max[0] << 5) | ((max[1] & 0x0f) << 1);
+			priv->y_max = (max[2] << 5) | ((max[1] & 0xf0) >> 3);
+		}
 	}
 
 	return 0;
@@ -520,19 +532,20 @@ static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned cha
 		return 0;
 
 	switch (pkt_type) {
-		case SYN_NEWABS:
-		case SYN_NEWABS_RELAXED:
-			return (packet[idx] & newabs_rel_mask[idx]) == newabs_rslt[idx];
 
-		case SYN_NEWABS_STRICT:
-			return (packet[idx] & newabs_mask[idx]) == newabs_rslt[idx];
+	case SYN_NEWABS:
+	case SYN_NEWABS_RELAXED:
+		return (packet[idx] & newabs_rel_mask[idx]) == newabs_rslt[idx];
 
-		case SYN_OLDABS:
-			return (packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx];
+	case SYN_NEWABS_STRICT:
+		return (packet[idx] & newabs_mask[idx]) == newabs_rslt[idx];
 
-		default:
-			printk(KERN_ERR "synaptics: unknown packet type %d\n", pkt_type);
-			return 0;
+	case SYN_OLDABS:
+		return (packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx];
+
+	default:
+		printk(KERN_ERR "synaptics: unknown packet type %d\n", pkt_type);
+		return 0;
 	}
 }
 
@@ -578,8 +591,10 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	int i;
 
 	__set_bit(EV_ABS, dev->evbit);
-	input_set_abs_params(dev, ABS_X, XMIN_NOMINAL, XMAX_NOMINAL, 0, 0);
-	input_set_abs_params(dev, ABS_Y, YMIN_NOMINAL, YMAX_NOMINAL, 0, 0);
+	input_set_abs_params(dev, ABS_X,
+			     XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0);
+	input_set_abs_params(dev, ABS_Y,
+			     YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 	__set_bit(ABS_TOOL_WIDTH, dev->absbit);
 
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index ae37c5d162a..7d4d5e12c0d 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -19,6 +19,7 @@
 #define SYN_QUE_RESOLUTION		0x08
 #define SYN_QUE_EXT_CAPAB		0x09
 #define SYN_QUE_EXT_CAPAB_0C		0x0c
+#define SYN_QUE_EXT_DIMENSIONS		0x0d
 
 /* synatics modes */
 #define SYN_BIT_ABSOLUTE_MODE		(1 << 7)
@@ -51,6 +52,7 @@
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
 #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
 #define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100100)
+#define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -101,8 +103,8 @@ struct synaptics_data {
 	unsigned long int ext_cap;		/* Extended Capabilities */
 	unsigned long int ext_cap_0c;		/* Ext Caps from 0x0c query */
 	unsigned long int identity;		/* Identification */
-	int x_res;				/* X resolution in units/mm */
-	int y_res;				/* Y resolution in units/mm */
+	unsigned int x_res, y_res;		/* X/Y resolution in units/mm */
+	unsigned int x_max, y_max;		/* Max dimensions (from FW) */
 
 	unsigned char pkt_type;			/* packet type - old, new, etc */
 	unsigned char mode;			/* current mode byte */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index ead0494721d..6168469ad1a 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -660,8 +660,21 @@ static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *
 }
 
 static struct pnp_device_id pnp_kbd_devids[] = {
+	{ .id = "PNP0300", .driver_data = 0 },
+	{ .id = "PNP0301", .driver_data = 0 },
+	{ .id = "PNP0302", .driver_data = 0 },
 	{ .id = "PNP0303", .driver_data = 0 },
+	{ .id = "PNP0304", .driver_data = 0 },
+	{ .id = "PNP0305", .driver_data = 0 },
+	{ .id = "PNP0306", .driver_data = 0 },
+	{ .id = "PNP0309", .driver_data = 0 },
+	{ .id = "PNP030a", .driver_data = 0 },
 	{ .id = "PNP030b", .driver_data = 0 },
+	{ .id = "PNP0320", .driver_data = 0 },
+	{ .id = "PNP0343", .driver_data = 0 },
+	{ .id = "PNP0344", .driver_data = 0 },
+	{ .id = "PNP0345", .driver_data = 0 },
+	{ .id = "CPQA0D7", .driver_data = 0 },
 	{ .id = "", },
 };
 
@@ -672,6 +685,7 @@ static struct pnp_driver i8042_pnp_kbd_driver = {
 };
 
 static struct pnp_device_id pnp_aux_devids[] = {
+	{ .id = "AUI0200", .driver_data = 0 },
 	{ .id = "FJC6000", .driver_data = 0 },
 	{ .id = "FJC6001", .driver_data = 0 },
 	{ .id = "PNP0f03", .driver_data = 0 },
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
index 670c61c5a51..37d0539fefa 100644
--- a/drivers/input/tablet/acecad.c
+++ b/drivers/input/tablet/acecad.c
@@ -66,18 +66,18 @@ static void usb_acecad_irq(struct urb *urb)
 	int prox, status;
 
 	switch (urb->status) {
-		case 0:
-			/* success */
-			break;
-		case -ECONNRESET:
-		case -ENOENT:
-		case -ESHUTDOWN:
-			/* this urb is terminated, clean up */
-			dbg("%s - urb shutting down with status: %d", __func__, urb->status);
-			return;
-		default:
-			dbg("%s - nonzero urb status received: %d", __func__, urb->status);
-			goto resubmit;
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
+		goto resubmit;
 	}
 
 	prox = (data[0] & 0x04) >> 2;
@@ -135,7 +135,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 	struct usb_acecad *acecad;
 	struct input_dev *input_dev;
 	int pipe, maxp;
-	int err = -ENOMEM;
+	int err;
 
 	if (interface->desc.bNumEndpoints != 1)
 		return -ENODEV;
@@ -193,40 +193,34 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 	input_dev->close = usb_acecad_close;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
-		BIT_MASK(ABS_PRESSURE);
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_TOOL_PEN) |
 		BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS) |
 		BIT_MASK(BTN_STYLUS2);
 
 	switch (id->driver_info) {
-		case 0:
-			input_dev->absmax[ABS_X] = 5000;
-			input_dev->absmax[ABS_Y] = 3750;
-			input_dev->absmax[ABS_PRESSURE] = 512;
-			if (!strlen(acecad->name))
-				snprintf(acecad->name, sizeof(acecad->name),
-					"USB Acecad Flair Tablet %04x:%04x",
-					le16_to_cpu(dev->descriptor.idVendor),
-					le16_to_cpu(dev->descriptor.idProduct));
-			break;
-		case 1:
-			input_dev->absmax[ABS_X] = 3000;
-			input_dev->absmax[ABS_Y] = 2250;
-			input_dev->absmax[ABS_PRESSURE] = 1024;
-			if (!strlen(acecad->name))
-				snprintf(acecad->name, sizeof(acecad->name),
-					"USB Acecad 302 Tablet %04x:%04x",
-					le16_to_cpu(dev->descriptor.idVendor),
-					le16_to_cpu(dev->descriptor.idProduct));
-			break;
+	case 0:
+		input_set_abs_params(input_dev, ABS_X, 0, 5000, 4, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 3750, 4, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 512, 0, 0);
+		if (!strlen(acecad->name))
+			snprintf(acecad->name, sizeof(acecad->name),
+				"USB Acecad Flair Tablet %04x:%04x",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct));
+		break;
+
+	case 1:
+		input_set_abs_params(input_dev, ABS_X, 0, 53000, 4, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 2250, 4, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1024, 0, 0);
+		if (!strlen(acecad->name))
+			snprintf(acecad->name, sizeof(acecad->name),
+				"USB Acecad 302 Tablet %04x:%04x",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct));
+		break;
 	}
 
-	input_dev->absfuzz[ABS_X] = 4;
-	input_dev->absfuzz[ABS_Y] = 4;
-
 	usb_fill_int_urb(acecad->irq, dev, pipe,
 			acecad->data, maxp > 8 ? 8 : maxp,
 			usb_acecad_irq, acecad, endpoint->bInterval);
@@ -252,13 +246,11 @@ static void usb_acecad_disconnect(struct usb_interface *intf)
 	struct usb_acecad *acecad = usb_get_intfdata(intf);
 
 	usb_set_intfdata(intf, NULL);
-	if (acecad) {
-		usb_kill_urb(acecad->irq);
-		input_unregister_device(acecad->input);
-		usb_free_urb(acecad->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
-		kfree(acecad);
-	}
+
+	input_unregister_device(acecad->input);
+	usb_free_urb(acecad->irq);
+	usb_buffer_free(acecad->usbdev, 8, acecad->data, acecad->data_dma);
+	kfree(acecad);
 }
 
 static struct usb_device_id usb_acecad_id_table [] = {
diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
index 6682b17bf84..b9969f12024 100644
--- a/drivers/input/tablet/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -34,10 +34,6 @@ struct kbtab {
 	struct input_dev *dev;
 	struct usb_device *usbdev;
 	struct urb *irq;
-	int x, y;
-	int button;
-	int pressure;
-	__u32 serial[2];
 	char phys[32];
 };
 
@@ -46,6 +42,7 @@ static void kbtab_irq(struct urb *urb)
 	struct kbtab *kbtab = urb->context;
 	unsigned char *data = kbtab->data;
 	struct input_dev *dev = kbtab->dev;
+	int pressure;
 	int retval;
 
 	switch (urb->status) {
@@ -63,31 +60,27 @@ static void kbtab_irq(struct urb *urb)
 		goto exit;
 	}
 
-	kbtab->x = get_unaligned_le16(&data[1]);
-	kbtab->y = get_unaligned_le16(&data[3]);
-
-	kbtab->pressure = (data[5]);
 
 	input_report_key(dev, BTN_TOOL_PEN, 1);
 
-	input_report_abs(dev, ABS_X, kbtab->x);
-	input_report_abs(dev, ABS_Y, kbtab->y);
+	input_report_abs(dev, ABS_X, get_unaligned_le16(&data[1]));
+	input_report_abs(dev, ABS_Y, get_unaligned_le16(&data[3]));
 
 	/*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/
 	input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
 
-	if (-1 == kb_pressure_click) {
-		input_report_abs(dev, ABS_PRESSURE, kbtab->pressure);
-	} else {
-		input_report_key(dev, BTN_LEFT, (kbtab->pressure > kb_pressure_click) ? 1 : 0);
-	};
+	pressure = data[5];
+	if (kb_pressure_click == -1)
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+	else
+		input_report_key(dev, BTN_LEFT, pressure > kb_pressure_click ? 1 : 0);
 
 	input_sync(dev);
 
  exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
+		err("%s - usb_submit_urb failed with result %d",
 		     __func__, retval);
 }
 
@@ -153,13 +146,11 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	input_dev->open = kbtab_open;
 	input_dev->close = kbtab_close;
 
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
-		BIT_MASK(EV_MSC);
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
-		BIT_MASK(BTN_TOUCH);
-	input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_LEFT)] |=
+		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+	input_dev->keybit[BIT_WORD(BTN_DIGI)] |=
+		BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH);
 	input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
@@ -182,7 +173,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	return 0;
 
  fail3:	usb_free_urb(kbtab->irq);
- fail2:	usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
+ fail2:	usb_buffer_free(dev, 8, kbtab->data, kbtab->data_dma);
  fail1:	input_free_device(input_dev);
 	kfree(kbtab);
 	return error;
@@ -193,13 +184,11 @@ static void kbtab_disconnect(struct usb_interface *intf)
 	struct kbtab *kbtab = usb_get_intfdata(intf);
 
 	usb_set_intfdata(intf, NULL);
-	if (kbtab) {
-		usb_kill_urb(kbtab->irq);
-		input_unregister_device(kbtab->dev);
-		usb_free_urb(kbtab->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma);
-		kfree(kbtab);
-	}
+
+	input_unregister_device(kbtab->dev);
+	usb_free_urb(kbtab->irq);
+	usb_buffer_free(kbtab->usbdev, 8, kbtab->data, kbtab->data_dma);
+	kfree(kbtab);
 }
 
 static struct usb_driver kbtab_driver = {
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 8fef1b689c6..284dfaab6b8 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -106,44 +106,18 @@ MODULE_LICENSE(DRIVER_LICENSE);
 
 struct wacom {
 	dma_addr_t data_dma;
-	struct input_dev *dev;
 	struct usb_device *usbdev;
 	struct usb_interface *intf;
 	struct urb *irq;
-	struct wacom_wac *wacom_wac;
+	struct wacom_wac wacom_wac;
 	struct mutex lock;
-	unsigned int open:1;
+	bool open;
 	char phys[32];
 };
 
-struct wacom_combo {
-	struct wacom *wacom;
-	struct urb *urb;
-};
-
 extern const struct usb_device_id wacom_ids[];
 
-extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
-extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
-extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
-extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data);
-extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value);
-extern void wacom_input_sync(void *wcombo);
-extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i4s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_tpc(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_tpc2fg(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern __u16 wacom_le16_to_cpu(unsigned char *data);
-extern __u16 wacom_be16_to_cpu(unsigned char *data);
-
+void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
+void wacom_setup_input_capabilities(struct input_dev *input_dev,
+				    struct wacom_wac *wacom_wac);
 #endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index f46502589e4..d90f4e00e51 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -11,8 +11,8 @@
  * (at your option) any later version.
  */
 
-#include "wacom.h"
 #include "wacom_wac.h"
+#include "wacom.h"
 
 /* defines to get HID report descriptor */
 #define HID_DEVICET_HID		(USB_TYPE_CLASS | 0x01)
@@ -70,15 +70,9 @@ static int usb_set_report(struct usb_interface *intf, unsigned char type,
 		buf, size, 1000);
 }
 
-static struct input_dev * get_input_dev(struct wacom_combo *wcombo)
-{
-	return wcombo->wacom->dev;
-}
-
 static void wacom_sys_irq(struct urb *urb)
 {
 	struct wacom *wacom = urb->context;
-	struct wacom_combo wcombo;
 	int retval;
 
 	switch (urb->status) {
@@ -96,59 +90,16 @@ static void wacom_sys_irq(struct urb *urb)
 		goto exit;
 	}
 
-	wcombo.wacom = wacom;
-	wcombo.urb = urb;
-
-	if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo))
-		input_sync(get_input_dev(&wcombo));
+	wacom_wac_irq(&wacom->wacom_wac, urb->actual_length);
 
  exit:
 	usb_mark_last_busy(wacom->usbdev);
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
 		     __func__, retval);
 }
 
-void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
-{
-	input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
-}
-
-void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
-{
-	input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
-}
-
-void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
-{
-	input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
-}
-
-void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
-{
-	input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
-}
-
-__u16 wacom_be16_to_cpu(unsigned char *data)
-{
-	__u16 value;
-	value = be16_to_cpu(*(__be16 *) data);
-	return value;
-}
-
-__u16 wacom_le16_to_cpu(unsigned char *data)
-{
-	__u16 value;
-	value = le16_to_cpu(*(__le16 *) data);
-	return value;
-}
-
-void wacom_input_sync(void *wcombo)
-{
-	input_sync(get_input_dev((struct wacom_combo *)wcombo));
-}
-
 static int wacom_open(struct input_dev *dev)
 {
 	struct wacom *wacom = input_get_drvdata(dev);
@@ -168,7 +119,7 @@ static int wacom_open(struct input_dev *dev)
 		return -EIO;
 	}
 
-	wacom->open = 1;
+	wacom->open = true;
 	wacom->intf->needs_remote_wakeup = 1;
 
 	mutex_unlock(&wacom->lock);
@@ -181,128 +132,11 @@ static void wacom_close(struct input_dev *dev)
 
 	mutex_lock(&wacom->lock);
 	usb_kill_urb(wacom->irq);
-	wacom->open = 0;
+	wacom->open = false;
 	wacom->intf->needs_remote_wakeup = 0;
 	mutex_unlock(&wacom->lock);
 }
 
-void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
-		BIT_MASK(BTN_5);
-	input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
-}
-
-void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->evbit[0] |= BIT_MASK(EV_MSC);
-	input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
-		BIT_MASK(BTN_4);
-}
-
-void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->evbit[0] |= BIT_MASK(EV_REL);
-	input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
-	input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
-		BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_STYLUS) |
-		BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
-	input_set_abs_params(input_dev, ABS_DISTANCE,
-			     0, wacom_wac->features.distance_max, 0, 0);
-}
-
-void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
-		BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
-	input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
-	input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-}
-
-void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
-		BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
-	input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
-}
-
-void input_dev_i4s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) | BIT_MASK(BTN_5) | BIT_MASK(BTN_6);
-	input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-}
-
-void input_dev_i4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_7) | BIT_MASK(BTN_8);
-}
-
-void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
-}
-
-void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
-	input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
-	input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
-	input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
-		BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
-		BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_STYLUS) |
-		BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_TOOL_BRUSH) |
-		BIT_MASK(BTN_TOOL_PENCIL) | BIT_MASK(BTN_TOOL_AIRBRUSH) |
-		BIT_MASK(BTN_TOOL_LENS) | BIT_MASK(BTN_STYLUS2);
-	input_set_abs_params(input_dev, ABS_DISTANCE,
-			     0, wacom_wac->features.distance_max, 0, 0);
-	input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
-	input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
-	input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
-	input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
-	input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
-}
-
-void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
-		BIT_MASK(BTN_STYLUS) | BIT_MASK(BTN_STYLUS2);
-}
-
-void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
-}
-
-void input_dev_tpc(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	struct wacom_features *features = &wacom_wac->features;
-
-	if (features->device_type == BTN_TOOL_DOUBLETAP ||
-	    features->device_type == BTN_TOOL_TRIPLETAP) {
-		input_set_abs_params(input_dev, ABS_RX, 0, features->x_phy, 0, 0);
-		input_set_abs_params(input_dev, ABS_RY, 0, features->y_phy, 0, 0);
-		__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-	}
-}
-
-void input_dev_tpc2fg(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	if (wacom_wac->features.device_type == BTN_TOOL_TRIPLETAP) {
-		input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_TRIPLETAP);
-		input_dev->evbit[0] |= BIT_MASK(EV_MSC);
-		input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
-	}
-}
-
 static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
 			   struct wacom_features *features)
 {
@@ -362,9 +196,9 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 							features->device_type = BTN_TOOL_TRIPLETAP;
 						}
 						features->x_max =
-							wacom_le16_to_cpu(&report[i + 3]);
+							get_unaligned_le16(&report[i + 3]);
 						features->x_phy =
-							wacom_le16_to_cpu(&report[i + 6]);
+							get_unaligned_le16(&report[i + 6]);
 						features->unit = report[i + 9];
 						features->unitExpo = report[i + 11];
 						i += 12;
@@ -374,7 +208,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
 						features->device_type = BTN_TOOL_PEN;
 						features->x_max =
-							wacom_le16_to_cpu(&report[i + 3]);
+							get_unaligned_le16(&report[i + 3]);
 						i += 4;
 					}
 				} else if (usage == WCM_DIGITIZER) {
@@ -396,15 +230,15 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
 							features->device_type = BTN_TOOL_TRIPLETAP;
 							features->y_max =
-								wacom_le16_to_cpu(&report[i + 3]);
+								get_unaligned_le16(&report[i + 3]);
 							features->y_phy =
-								wacom_le16_to_cpu(&report[i + 6]);
+								get_unaligned_le16(&report[i + 6]);
 							i += 7;
 						} else {
 							features->y_max =
 								features->x_max;
 							features->y_phy =
-								wacom_le16_to_cpu(&report[i + 3]);
+								get_unaligned_le16(&report[i + 3]);
 							i += 4;
 						}
 					} else if (pen) {
@@ -413,7 +247,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
 						features->device_type = BTN_TOOL_PEN;
 						features->y_max =
-							wacom_le16_to_cpu(&report[i + 3]);
+							get_unaligned_le16(&report[i + 3]);
 						i += 4;
 					}
 				}
@@ -432,7 +266,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			case HID_USAGE_UNDEFINED:
 				if (usage == WCM_DESKTOP && finger) /* capacity */
 					features->pressure_max =
-						wacom_le16_to_cpu(&report[i + 3]);
+						get_unaligned_le16(&report[i + 3]);
 				i += 4;
 				break;
 			}
@@ -528,6 +362,81 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 	return error;
 }
 
+struct wacom_usbdev_data {
+	struct list_head list;
+	struct kref kref;
+	struct usb_device *dev;
+	struct wacom_shared shared;
+};
+
+static LIST_HEAD(wacom_udev_list);
+static DEFINE_MUTEX(wacom_udev_list_lock);
+
+static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev)
+{
+	struct wacom_usbdev_data *data;
+
+	list_for_each_entry(data, &wacom_udev_list, list) {
+		if (data->dev == dev) {
+			kref_get(&data->kref);
+			return data;
+		}
+	}
+
+	return NULL;
+}
+
+static int wacom_add_shared_data(struct wacom_wac *wacom,
+				 struct usb_device *dev)
+{
+	struct wacom_usbdev_data *data;
+	int retval = 0;
+
+	mutex_lock(&wacom_udev_list_lock);
+
+	data = wacom_get_usbdev_data(dev);
+	if (!data) {
+		data = kzalloc(sizeof(struct wacom_usbdev_data), GFP_KERNEL);
+		if (!data) {
+			retval = -ENOMEM;
+			goto out;
+		}
+
+		kref_init(&data->kref);
+		data->dev = dev;
+		list_add_tail(&data->list, &wacom_udev_list);
+	}
+
+	wacom->shared = &data->shared;
+
+out:
+	mutex_unlock(&wacom_udev_list_lock);
+	return retval;
+}
+
+static void wacom_release_shared_data(struct kref *kref)
+{
+	struct wacom_usbdev_data *data =
+		container_of(kref, struct wacom_usbdev_data, kref);
+
+	mutex_lock(&wacom_udev_list_lock);
+	list_del(&data->list);
+	mutex_unlock(&wacom_udev_list_lock);
+
+	kfree(data);
+}
+
+static void wacom_remove_shared_data(struct wacom_wac *wacom)
+{
+	struct wacom_usbdev_data *data;
+
+	if (wacom->shared) {
+		data = container_of(wacom->shared, struct wacom_usbdev_data, shared);
+		kref_put(&data->kref, wacom_release_shared_data);
+		wacom->shared = NULL;
+	}
+}
+
 static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
@@ -542,13 +451,13 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 		return -EINVAL;
 
 	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
-	wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!wacom || !input_dev || !wacom_wac) {
+	if (!wacom || !input_dev) {
 		error = -ENOMEM;
 		goto fail1;
 	}
 
+	wacom_wac = &wacom->wacom_wac;
 	wacom_wac->features = *((struct wacom_features *)id->driver_info);
 	features = &wacom_wac->features;
 	if (features->pktlen > WACOM_PKGLEN_MAX) {
@@ -570,20 +479,12 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	}
 
 	wacom->usbdev = dev;
-	wacom->dev = input_dev;
 	wacom->intf = intf;
 	mutex_init(&wacom->lock);
 	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
 	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
 
-	usb_to_input_id(dev, &input_dev->id);
-
-	input_dev->dev.parent = &intf->dev;
-
-	input_set_drvdata(input_dev, wacom);
-
-	input_dev->open = wacom_open;
-	input_dev->close = wacom_close;
+	wacom_wac->input = input_dev;
 
 	endpoint = &intf->cur_altsetting->endpoint[0].desc;
 
@@ -600,20 +501,21 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 			features->device_type == BTN_TOOL_PEN ?
 				" Pen" : " Finger",
 			sizeof(wacom_wac->name));
+
+		error = wacom_add_shared_data(wacom_wac, dev);
+		if (error)
+			goto fail3;
 	}
 
 	input_dev->name = wacom_wac->name;
-	wacom->wacom_wac = wacom_wac;
-
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOUCH);
-
-	input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
-	input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
+	input_dev->name = wacom_wac->name;
+	input_dev->dev.parent = &intf->dev;
+	input_dev->open = wacom_open;
+	input_dev->close = wacom_close;
+	usb_to_input_id(dev, &input_dev->id);
+	input_set_drvdata(input_dev, wacom);
 
-	wacom_init_input_dev(input_dev, wacom_wac);
+	wacom_setup_input_capabilities(input_dev, wacom_wac);
 
 	usb_fill_int_urb(wacom->irq, dev,
 			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
@@ -622,9 +524,9 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	wacom->irq->transfer_dma = wacom->data_dma;
 	wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-	error = input_register_device(wacom->dev);
+	error = input_register_device(input_dev);
 	if (error)
-		goto fail3;
+		goto fail4;
 
 	/* Note that if query fails it is not a hard failure */
 	wacom_query_tablet_data(intf, features);
@@ -632,11 +534,11 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	usb_set_intfdata(intf, wacom);
 	return 0;
 
+ fail4:	wacom_remove_shared_data(wacom_wac);
  fail3:	usb_free_urb(wacom->irq);
  fail2:	usb_buffer_free(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma);
  fail1:	input_free_device(input_dev);
 	kfree(wacom);
-	kfree(wacom_wac);
 	return error;
 }
 
@@ -647,11 +549,11 @@ static void wacom_disconnect(struct usb_interface *intf)
 	usb_set_intfdata(intf, NULL);
 
 	usb_kill_urb(wacom->irq);
-	input_unregister_device(wacom->dev);
+	input_unregister_device(wacom->wacom_wac.input);
 	usb_free_urb(wacom->irq);
 	usb_buffer_free(interface_to_usbdev(intf), WACOM_PKGLEN_MAX,
-			wacom->wacom_wac->data, wacom->data_dma);
-	kfree(wacom->wacom_wac);
+			wacom->wacom_wac.data, wacom->data_dma);
+	wacom_remove_shared_data(&wacom->wacom_wac);
 	kfree(wacom);
 }
 
@@ -669,7 +571,7 @@ static int wacom_suspend(struct usb_interface *intf, pm_message_t message)
 static int wacom_resume(struct usb_interface *intf)
 {
 	struct wacom *wacom = usb_get_intfdata(intf);
-	struct wacom_features *features = &wacom->wacom_wac->features;
+	struct wacom_features *features = &wacom->wacom_wac.features;
 	int rv;
 
 	mutex_lock(&wacom->lock);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 4a852d815c6..847fd0135bc 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -11,52 +11,58 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-#include "wacom.h"
+
 #include "wacom_wac.h"
+#include "wacom.h"
 
-static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo)
+static int wacom_penpartner_irq(struct wacom_wac *wacom)
 {
 	unsigned char *data = wacom->data;
+	struct input_dev *input = wacom->input;
 
 	switch (data[0]) {
-		case 1:
-			if (data[5] & 0x80) {
-				wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-				wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
-				wacom_report_key(wcombo, wacom->tool[0], 1);
-				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
-				wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
-				wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
-				wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
-				wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127));
-				wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
-			} else {
-				wacom_report_key(wcombo, wacom->tool[0], 0);
-				wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */
-				wacom_report_abs(wcombo, ABS_PRESSURE, -1);
-				wacom_report_key(wcombo, BTN_TOUCH, 0);
-			}
-			break;
-		case 2:
-			wacom_report_key(wcombo, BTN_TOOL_PEN, 1);
-			wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
-			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
-			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
-			wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
-			wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
-			wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
-			break;
-		default:
-			printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
-			return 0;
+	case 1:
+		if (data[5] & 0x80) {
+			wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+			wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
+			input_report_key(input, wacom->tool[0], 1);
+			input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
+			input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
+			input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
+			input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
+			input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127));
+			input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
+		} else {
+			input_report_key(input, wacom->tool[0], 0);
+			input_report_abs(input, ABS_MISC, 0); /* report tool id */
+			input_report_abs(input, ABS_PRESSURE, -1);
+			input_report_key(input, BTN_TOUCH, 0);
+		}
+		break;
+
+	case 2:
+		input_report_key(input, BTN_TOOL_PEN, 1);
+		input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
+		input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
+		input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
+		input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
+		input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
+		input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
+		break;
+
+	default:
+		printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
+		return 0;
         }
+
 	return 1;
 }
 
-static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
+static int wacom_pl_irq(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
+	struct input_dev *input = wacom->input;
 	int prox, pressure;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
@@ -90,8 +96,8 @@ static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
 			/* was entered with stylus2 pressed */
 			if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
 				/* report out proximity for previous tool */
-				wacom_report_key(wcombo, wacom->tool[1], 0);
-				wacom_input_sync(wcombo);
+				input_report_key(input, wacom->tool[1], 0);
+				input_sync(input);
 				wacom->tool[1] = BTN_TOOL_PEN;
 				return 0;
 			}
@@ -101,32 +107,33 @@ static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom->tool[1] = BTN_TOOL_PEN;
 			wacom->id[0] = STYLUS_DEVICE_ID;
 		}
-		wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */
-		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
-		wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
-		wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
-		wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
-
-		wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08);
-		wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10);
+		input_report_key(input, wacom->tool[1], prox); /* report in proximity for tool */
+		input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
+		input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
+		input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
+		input_report_abs(input, ABS_PRESSURE, pressure);
+
+		input_report_key(input, BTN_TOUCH, data[4] & 0x08);
+		input_report_key(input, BTN_STYLUS, data[4] & 0x10);
 		/* Only allow the stylus2 button to be reported for the pen tool. */
-		wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
+		input_report_key(input, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
 	} else {
 		/* report proximity-out of a (valid) tool */
 		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
 			/* Unknown tool selected default to pen tool */
 			wacom->tool[1] = BTN_TOOL_PEN;
 		}
-		wacom_report_key(wcombo, wacom->tool[1], prox);
+		input_report_key(input, wacom->tool[1], prox);
 	}
 
 	wacom->tool[0] = prox; /* Save proximity state */
 	return 1;
 }
 
-static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
+static int wacom_ptu_irq(struct wacom_wac *wacom)
 {
 	unsigned char *data = wacom->data;
+	struct input_dev *input = wacom->input;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
 		printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
@@ -134,40 +141,41 @@ static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
 	}
 
 	if (data[1] & 0x04) {
-		wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20);
-		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08);
+		input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20);
+		input_report_key(input, BTN_TOUCH, data[1] & 0x08);
 		wacom->id[0] = ERASER_DEVICE_ID;
 	} else {
-		wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20);
-		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
+		input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20);
+		input_report_key(input, BTN_TOUCH, data[1] & 0x01);
 		wacom->id[0] = STYLUS_DEVICE_ID;
 	}
-	wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
-	wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
-	wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
-	wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
-	wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
-	wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+	input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
+	input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
+	input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
+	input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
+	input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+	input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
 	return 1;
 }
 
-static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
+static int wacom_graphire_irq(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
-	int x, y, rw;
-	static int penData = 0;
+	struct input_dev *input = wacom->input;
+	int prox;
+	int rw = 0;
+	int retval = 0;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
 		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
-		return 0;
+		goto exit;
 	}
 
-	if (data[1] & 0x80) {
-		/* in prox and not a pad data */
-		penData = 1;
-
-		switch ((data[1] >> 5) & 3) {
+	prox = data[1] & 0x80;
+	if (prox || wacom->id[0]) {
+		if (prox) {
+			switch ((data[1] >> 5) & 3) {
 
 			case 0:	/* Pen */
 				wacom->tool[0] = BTN_TOOL_PEN;
@@ -180,128 +188,89 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 				break;
 
 			case 2: /* Mouse with wheel */
-				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
-				if (features->type == WACOM_G4 || features->type == WACOM_MO) {
-					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
-					wacom_report_rel(wcombo, REL_WHEEL, -rw);
-				} else
-					wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
+				input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
 				/* fall through */
 
 			case 3: /* Mouse without wheel */
 				wacom->tool[0] = BTN_TOOL_MOUSE;
 				wacom->id[0] = CURSOR_DEVICE_ID;
-				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
-				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
-				if (features->type == WACOM_G4 || features->type == WACOM_MO)
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
-				else
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
 				break;
+			}
 		}
-		x = wacom_le16_to_cpu(&data[2]);
-		y = wacom_le16_to_cpu(&data[4]);
-		wacom_report_abs(wcombo, ABS_X, x);
-		wacom_report_abs(wcombo, ABS_Y, y);
+		input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
+		input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
 		if (wacom->tool[0] != BTN_TOOL_MOUSE) {
-			wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
-			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
-			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
-			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
-		}
-		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 1);
-	} else if (wacom->id[0]) {
-		wacom_report_abs(wcombo, ABS_X, 0);
-		wacom_report_abs(wcombo, ABS_Y, 0);
-		if (wacom->tool[0] == BTN_TOOL_MOUSE) {
-			wacom_report_key(wcombo, BTN_LEFT, 0);
-			wacom_report_key(wcombo, BTN_RIGHT, 0);
-			wacom_report_abs(wcombo, ABS_DISTANCE, 0);
+			input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
+			input_report_key(input, BTN_TOUCH, data[1] & 0x01);
+			input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+			input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
 		} else {
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+			input_report_key(input, BTN_LEFT, data[1] & 0x01);
+			input_report_key(input, BTN_RIGHT, data[1] & 0x02);
+			if (features->type == WACOM_G4 ||
+					features->type == WACOM_MO) {
+				input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f);
+				rw = (signed)(data[7] & 0x04) - (data[7] & 0x03);
+			} else {
+				input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f);
+				rw = -(signed)data[6];
+			}
+			input_report_rel(input, REL_WHEEL, rw);
 		}
-		wacom->id[0] = 0;
-		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 0);
+
+		if (!prox)
+			wacom->id[0] = 0;
+		input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
+		input_report_key(input, wacom->tool[0], prox);
+		input_sync(input); /* sync last event */
 	}
 
 	/* send pad data */
 	switch (features->type) {
-	    case WACOM_G4:
-		if (data[7] & 0xf8) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
+	case WACOM_G4:
+		prox = data[7] & 0xf8;
+		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
+			input_report_key(input, BTN_0, (data[7] & 0x40));
+			input_report_key(input, BTN_4, (data[7] & 0x80));
 			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
-			wacom_report_rel(wcombo, REL_WHEEL, rw);
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
-			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
-			wacom_report_rel(wcombo, REL_WHEEL, 0);
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+			input_report_rel(input, REL_WHEEL, rw);
+			input_report_key(input, BTN_TOOL_FINGER, 0xf0);
+			if (!prox)
+				wacom->id[1] = 0;
+			input_report_abs(input, ABS_MISC, wacom->id[1]);
+			input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
+			retval = 1;
 		}
 		break;
-	    case WACOM_MO:
-		if ((data[7] & 0xf8) || (data[8] & 0xff)) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
+
+	case WACOM_MO:
+		prox = (data[7] & 0xf8) || data[8];
+		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
-			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
-			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
-			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
-			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
-			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
-			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
-			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+			input_report_key(input, BTN_0, (data[7] & 0x08));
+			input_report_key(input, BTN_1, (data[7] & 0x20));
+			input_report_key(input, BTN_4, (data[7] & 0x10));
+			input_report_key(input, BTN_5, (data[7] & 0x40));
+			input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f));
+			input_report_key(input, BTN_TOOL_FINGER, 0xf0);
+			if (!prox)
+				wacom->id[1] = 0;
+			input_report_abs(input, ABS_MISC, wacom->id[1]);
+			input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
 		}
+		retval = 1;
 		break;
 	}
-	return 1;
+exit:
+	return retval;
 }
 
-static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
+static int wacom_intuos_inout(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
+	struct input_dev *input = wacom->input;
 	int idx = 0;
 
 	/* tool number */
@@ -316,64 +285,73 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 			(data[6] << 4) + (data[7] >> 4);
 
 		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+
 		switch (wacom->id[idx]) {
-			case 0x812: /* Inking pen */
-			case 0x801: /* Intuos3 Inking pen */
-			case 0x20802: /* Intuos4 Classic Pen */
-			case 0x012:
-				wacom->tool[idx] = BTN_TOOL_PENCIL;
-				break;
-			case 0x822: /* Pen */
-			case 0x842:
-			case 0x852:
-			case 0x823: /* Intuos3 Grip Pen */
-			case 0x813: /* Intuos3 Classic Pen */
-			case 0x885: /* Intuos3 Marker Pen */
-			case 0x802: /* Intuos4 Grip Pen Eraser */
-			case 0x804: /* Intuos4 Marker Pen */
-			case 0x40802: /* Intuos4 Classic Pen */
-			case 0x022:
-				wacom->tool[idx] = BTN_TOOL_PEN;
-				break;
-			case 0x832: /* Stroke pen */
-			case 0x032:
-				wacom->tool[idx] = BTN_TOOL_BRUSH;
-				break;
-			case 0x007: /* Mouse 4D and 2D */
-		        case 0x09c:
-			case 0x094:
-			case 0x017: /* Intuos3 2D Mouse */
-			case 0x806: /* Intuos4 Mouse */
-				wacom->tool[idx] = BTN_TOOL_MOUSE;
-				break;
-			case 0x096: /* Lens cursor */
-			case 0x097: /* Intuos3 Lens cursor */
-			case 0x006: /* Intuos4 Lens cursor */
-				wacom->tool[idx] = BTN_TOOL_LENS;
-				break;
-			case 0x82a: /* Eraser */
-			case 0x85a:
-		        case 0x91a:
-			case 0xd1a:
-			case 0x0fa:
-			case 0x82b: /* Intuos3 Grip Pen Eraser */
-			case 0x81b: /* Intuos3 Classic Pen Eraser */
-			case 0x91b: /* Intuos3 Airbrush Eraser */
-			case 0x80c: /* Intuos4 Marker Pen Eraser */
-			case 0x80a: /* Intuos4 Grip Pen Eraser */
-			case 0x4080a: /* Intuos4 Classic Pen Eraser */
-			case 0x90a: /* Intuos4 Airbrush Eraser */
-				wacom->tool[idx] = BTN_TOOL_RUBBER;
-				break;
-			case 0xd12:
-			case 0x912:
-			case 0x112:
-			case 0x913: /* Intuos3 Airbrush */
-			case 0x902: /* Intuos4 Airbrush */
-				wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
-				break;
-			default: /* Unknown tool */
-				wacom->tool[idx] = BTN_TOOL_PEN;
+		case 0x812: /* Inking pen */
+		case 0x801: /* Intuos3 Inking pen */
+		case 0x20802: /* Intuos4 Classic Pen */
+		case 0x012:
+			wacom->tool[idx] = BTN_TOOL_PENCIL;
+			break;
+
+		case 0x822: /* Pen */
+		case 0x842:
+		case 0x852:
+		case 0x823: /* Intuos3 Grip Pen */
+		case 0x813: /* Intuos3 Classic Pen */
+		case 0x885: /* Intuos3 Marker Pen */
+		case 0x802: /* Intuos4 Grip Pen Eraser */
+		case 0x804: /* Intuos4 Marker Pen */
+		case 0x40802: /* Intuos4 Classic Pen */
+		case 0x022:
+			wacom->tool[idx] = BTN_TOOL_PEN;
+			break;
+
+		case 0x832: /* Stroke pen */
+		case 0x032:
+			wacom->tool[idx] = BTN_TOOL_BRUSH;
+			break;
+
+		case 0x007: /* Mouse 4D and 2D */
+		case 0x09c:
+		case 0x094:
+		case 0x017: /* Intuos3 2D Mouse */
+		case 0x806: /* Intuos4 Mouse */
+			wacom->tool[idx] = BTN_TOOL_MOUSE;
+			break;
+
+		case 0x096: /* Lens cursor */
+		case 0x097: /* Intuos3 Lens cursor */
+		case 0x006: /* Intuos4 Lens cursor */
+			wacom->tool[idx] = BTN_TOOL_LENS;
+			break;
+
+		case 0x82a: /* Eraser */
+		case 0x85a:
+		case 0x91a:
+		case 0xd1a:
+		case 0x0fa:
+		case 0x82b: /* Intuos3 Grip Pen Eraser */
+		case 0x81b: /* Intuos3 Classic Pen Eraser */
+		case 0x91b: /* Intuos3 Airbrush Eraser */
+		case 0x80c: /* Intuos4 Marker Pen Eraser */
+		case 0x80a: /* Intuos4 Grip Pen Eraser */
+		case 0x4080a: /* Intuos4 Classic Pen Eraser */
+		case 0x90a: /* Intuos4 Airbrush Eraser */
+			wacom->tool[idx] = BTN_TOOL_RUBBER;
+			break;
+
+		case 0xd12:
+		case 0x912:
+		case 0x112:
+		case 0x913: /* Intuos3 Airbrush */
+		case 0x902: /* Intuos4 Airbrush */
+			wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
+			break;
+
+		default: /* Unknown tool */
+			wacom->tool[idx] = BTN_TOOL_PEN;
+			break;
 		}
 		return 1;
 	}
@@ -384,41 +362,42 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 		 * Reset all states otherwise we lose the initial states
 		 * when in-prox next time
 		 */
-		wacom_report_abs(wcombo, ABS_X, 0);
-		wacom_report_abs(wcombo, ABS_Y, 0);
-		wacom_report_abs(wcombo, ABS_DISTANCE, 0);
-		wacom_report_abs(wcombo, ABS_TILT_X, 0);
-		wacom_report_abs(wcombo, ABS_TILT_Y, 0);
+		input_report_abs(input, ABS_X, 0);
+		input_report_abs(input, ABS_Y, 0);
+		input_report_abs(input, ABS_DISTANCE, 0);
+		input_report_abs(input, ABS_TILT_X, 0);
+		input_report_abs(input, ABS_TILT_Y, 0);
 		if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
-			wacom_report_key(wcombo, BTN_LEFT, 0);
-			wacom_report_key(wcombo, BTN_MIDDLE, 0);
-			wacom_report_key(wcombo, BTN_RIGHT, 0);
-			wacom_report_key(wcombo, BTN_SIDE, 0);
-			wacom_report_key(wcombo, BTN_EXTRA, 0);
-			wacom_report_abs(wcombo, ABS_THROTTLE, 0);
-			wacom_report_abs(wcombo, ABS_RZ, 0);
+			input_report_key(input, BTN_LEFT, 0);
+			input_report_key(input, BTN_MIDDLE, 0);
+			input_report_key(input, BTN_RIGHT, 0);
+			input_report_key(input, BTN_SIDE, 0);
+			input_report_key(input, BTN_EXTRA, 0);
+			input_report_abs(input, ABS_THROTTLE, 0);
+			input_report_abs(input, ABS_RZ, 0);
 		} else {
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
-			wacom_report_abs(wcombo, ABS_WHEEL, 0);
+			input_report_abs(input, ABS_PRESSURE, 0);
+			input_report_key(input, BTN_STYLUS, 0);
+			input_report_key(input, BTN_STYLUS2, 0);
+			input_report_key(input, BTN_TOUCH, 0);
+			input_report_abs(input, ABS_WHEEL, 0);
 			if (features->type >= INTUOS3S)
-				wacom_report_abs(wcombo, ABS_Z, 0);
+				input_report_abs(input, ABS_Z, 0);
 		}
-		wacom_report_key(wcombo, wacom->tool[idx], 0);
-		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
-		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+		input_report_key(input, wacom->tool[idx], 0);
+		input_report_abs(input, ABS_MISC, 0); /* reset tool id */
+		input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
 		wacom->id[idx] = 0;
 		return 2;
 	}
 	return 0;
 }
 
-static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
+static void wacom_intuos_general(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
+	struct input_dev *input = wacom->input;
 	unsigned int t;
 
 	/* general pen packet */
@@ -426,30 +405,30 @@ static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
 		t = (data[6] << 2) | ((data[7] >> 6) & 3);
 		if (features->type >= INTUOS4S && features->type <= INTUOS4L)
 			t = (t << 1) | (data[1] & 1);
-		wacom_report_abs(wcombo, ABS_PRESSURE, t);
-		wacom_report_abs(wcombo, ABS_TILT_X,
+		input_report_abs(input, ABS_PRESSURE, t);
+		input_report_abs(input, ABS_TILT_X,
 				((data[7] << 1) & 0x7e) | (data[8] >> 7));
-		wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
-		wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2);
-		wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4);
-		wacom_report_key(wcombo, BTN_TOUCH, t > 10);
+		input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
+		input_report_key(input, BTN_STYLUS, data[1] & 2);
+		input_report_key(input, BTN_STYLUS2, data[1] & 4);
+		input_report_key(input, BTN_TOUCH, t > 10);
 	}
 
 	/* airbrush second packet */
 	if ((data[1] & 0xbc) == 0xb4) {
-		wacom_report_abs(wcombo, ABS_WHEEL,
+		input_report_abs(input, ABS_WHEEL,
 				(data[6] << 2) | ((data[7] >> 6) & 3));
-		wacom_report_abs(wcombo, ABS_TILT_X,
+		input_report_abs(input, ABS_TILT_X,
 				((data[7] << 1) & 0x7e) | (data[8] >> 7));
-		wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+		input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
 	}
-	return;
 }
 
-static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
+static int wacom_intuos_irq(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
+	struct input_dev *input = wacom->input;
 	unsigned int t;
 	int idx = 0, result;
 
@@ -470,61 +449,61 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom->tool[1] = BTN_TOOL_FINGER;
 
 		if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
-			wacom_report_key(wcombo, BTN_0, (data[2] & 0x01));
-			wacom_report_key(wcombo, BTN_1, (data[3] & 0x01));
-			wacom_report_key(wcombo, BTN_2, (data[3] & 0x02));
-			wacom_report_key(wcombo, BTN_3, (data[3] & 0x04));
-			wacom_report_key(wcombo, BTN_4, (data[3] & 0x08));
-			wacom_report_key(wcombo, BTN_5, (data[3] & 0x10));
-			wacom_report_key(wcombo, BTN_6, (data[3] & 0x20));
+			input_report_key(input, BTN_0, (data[2] & 0x01));
+			input_report_key(input, BTN_1, (data[3] & 0x01));
+			input_report_key(input, BTN_2, (data[3] & 0x02));
+			input_report_key(input, BTN_3, (data[3] & 0x04));
+			input_report_key(input, BTN_4, (data[3] & 0x08));
+			input_report_key(input, BTN_5, (data[3] & 0x10));
+			input_report_key(input, BTN_6, (data[3] & 0x20));
 			if (data[1] & 0x80) {
-				wacom_report_abs(wcombo, ABS_WHEEL, (data[1] & 0x7f));
+				input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f));
 			} else {
 				/* Out of proximity, clear wheel value. */
-				wacom_report_abs(wcombo, ABS_WHEEL, 0);
+				input_report_abs(input, ABS_WHEEL, 0);
 			}
 			if (features->type != INTUOS4S) {
-				wacom_report_key(wcombo, BTN_7, (data[3] & 0x40));
-				wacom_report_key(wcombo, BTN_8, (data[3] & 0x80));
+				input_report_key(input, BTN_7, (data[3] & 0x40));
+				input_report_key(input, BTN_8, (data[3] & 0x80));
 			}
 			if (data[1] | (data[2] & 0x01) | data[3]) {
-				wacom_report_key(wcombo, wacom->tool[1], 1);
-				wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+				input_report_key(input, wacom->tool[1], 1);
+				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
-				wacom_report_key(wcombo, wacom->tool[1], 0);
-				wacom_report_abs(wcombo, ABS_MISC, 0);
+				input_report_key(input, wacom->tool[1], 0);
+				input_report_abs(input, ABS_MISC, 0);
 			}
 		} else {
-			wacom_report_key(wcombo, BTN_0, (data[5] & 0x01));
-			wacom_report_key(wcombo, BTN_1, (data[5] & 0x02));
-			wacom_report_key(wcombo, BTN_2, (data[5] & 0x04));
-			wacom_report_key(wcombo, BTN_3, (data[5] & 0x08));
-			wacom_report_key(wcombo, BTN_4, (data[6] & 0x01));
-			wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
-			wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
-			wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
-			wacom_report_key(wcombo, BTN_8, (data[5] & 0x10));
-			wacom_report_key(wcombo, BTN_9, (data[6] & 0x10));
-			wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
-			wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
+			input_report_key(input, BTN_0, (data[5] & 0x01));
+			input_report_key(input, BTN_1, (data[5] & 0x02));
+			input_report_key(input, BTN_2, (data[5] & 0x04));
+			input_report_key(input, BTN_3, (data[5] & 0x08));
+			input_report_key(input, BTN_4, (data[6] & 0x01));
+			input_report_key(input, BTN_5, (data[6] & 0x02));
+			input_report_key(input, BTN_6, (data[6] & 0x04));
+			input_report_key(input, BTN_7, (data[6] & 0x08));
+			input_report_key(input, BTN_8, (data[5] & 0x10));
+			input_report_key(input, BTN_9, (data[6] & 0x10));
+			input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
+			input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
 
 			if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
 				data[2] | (data[3] & 0x1f) | data[4]) {
-				wacom_report_key(wcombo, wacom->tool[1], 1);
-				wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+				input_report_key(input, wacom->tool[1], 1);
+				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
-				wacom_report_key(wcombo, wacom->tool[1], 0);
-				wacom_report_abs(wcombo, ABS_MISC, 0);
+				input_report_key(input, wacom->tool[1], 0);
+				input_report_abs(input, ABS_MISC, 0);
 			}
 		}
-		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff);
+		input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
                 return 1;
 	}
 
 	/* process in/out prox events */
-	result = wacom_intuos_inout(wacom, wcombo);
+	result = wacom_intuos_inout(wacom);
 	if (result)
-                return result-1;
+                return result - 1;
 
 	/* don't proceed if we don't know the ID */
 	if (!wacom->id[idx])
@@ -545,17 +524,17 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
                  return 0;
 
 	if (features->type >= INTUOS3S) {
-		wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
-		wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
-		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
+		input_report_abs(input, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
+		input_report_abs(input, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
+		input_report_abs(input, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
 	} else {
-		wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2]));
-		wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4]));
-		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
+		input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[2]));
+		input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[4]));
+		input_report_abs(input, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
 	}
 
 	/* process general packets */
-	wacom_intuos_general(wacom, wcombo);
+	wacom_intuos_general(wacom);
 
 	/* 4D mouse, 2D mouse, marker pen rotation, tilt mouse, or Lens cursor packets */
 	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0 || (data[1] & 0xbc) == 0xac) {
@@ -567,174 +546,191 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 				t = (data[6] << 3) | ((data[7] >> 5) & 7);
 				t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
 					((t-1) / 2 + 450)) : (450 - t / 2) ;
-				wacom_report_abs(wcombo, ABS_Z, t);
+				input_report_abs(input, ABS_Z, t);
 			} else {
 				/* 4D mouse rotation packet */
 				t = (data[6] << 3) | ((data[7] >> 5) & 7);
-				wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ?
+				input_report_abs(input, ABS_RZ, (data[7] & 0x20) ?
 					((t - 1) / 2) : -t / 2);
 			}
 
 		} else if (!(data[1] & 0x10) && features->type < INTUOS3S) {
 			/* 4D mouse packet */
-			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
-			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
-			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x04);
+			input_report_key(input, BTN_LEFT,   data[8] & 0x01);
+			input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
+			input_report_key(input, BTN_RIGHT,  data[8] & 0x04);
 
-			wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x20);
-			wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x10);
+			input_report_key(input, BTN_SIDE,   data[8] & 0x20);
+			input_report_key(input, BTN_EXTRA,  data[8] & 0x10);
 			t = (data[6] << 2) | ((data[7] >> 6) & 3);
-			wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
+			input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
 
 		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
 			/* I4 mouse */
 			if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
-				wacom_report_key(wcombo, BTN_LEFT,   data[6] & 0x01);
-				wacom_report_key(wcombo, BTN_MIDDLE, data[6] & 0x02);
-				wacom_report_key(wcombo, BTN_RIGHT,  data[6] & 0x04);
-				wacom_report_rel(wcombo, REL_WHEEL, ((data[7] & 0x80) >> 7)
+				input_report_key(input, BTN_LEFT,   data[6] & 0x01);
+				input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
+				input_report_key(input, BTN_RIGHT,  data[6] & 0x04);
+				input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7)
 						 - ((data[7] & 0x40) >> 6));
-				wacom_report_key(wcombo, BTN_SIDE,   data[6] & 0x08);
-				wacom_report_key(wcombo, BTN_EXTRA,  data[6] & 0x10);
+				input_report_key(input, BTN_SIDE,   data[6] & 0x08);
+				input_report_key(input, BTN_EXTRA,  data[6] & 0x10);
 
-				wacom_report_abs(wcombo, ABS_TILT_X,
+				input_report_abs(input, ABS_TILT_X,
 					((data[7] << 1) & 0x7e) | (data[8] >> 7));
-				wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+				input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
 			} else {
 				/* 2D mouse packet */
-				wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x04);
-				wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08);
-				wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x10);
-				wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01)
+				input_report_key(input, BTN_LEFT,   data[8] & 0x04);
+				input_report_key(input, BTN_MIDDLE, data[8] & 0x08);
+				input_report_key(input, BTN_RIGHT,  data[8] & 0x10);
+				input_report_rel(input, REL_WHEEL, (data[8] & 0x01)
 						 - ((data[8] & 0x02) >> 1));
 
 				/* I3 2D mouse side buttons */
 				if (features->type >= INTUOS3S && features->type <= INTUOS3L) {
-					wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x40);
-					wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x20);
+					input_report_key(input, BTN_SIDE,   data[8] & 0x40);
+					input_report_key(input, BTN_EXTRA,  data[8] & 0x20);
 				}
 			}
 		} else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
 				features->type == INTUOS4L) &&
 			   wacom->tool[idx] == BTN_TOOL_LENS) {
 			/* Lens cursor packets */
-			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
-			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
-			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x04);
-			wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x10);
-			wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x08);
+			input_report_key(input, BTN_LEFT,   data[8] & 0x01);
+			input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
+			input_report_key(input, BTN_RIGHT,  data[8] & 0x04);
+			input_report_key(input, BTN_SIDE,   data[8] & 0x10);
+			input_report_key(input, BTN_EXTRA,  data[8] & 0x08);
 		}
 	}
 
-	wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
-	wacom_report_key(wcombo, wacom->tool[idx], 1);
-	wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+	input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */
+	input_report_key(input, wacom->tool[idx], 1);
+	input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
 	return 1;
 }
 
 
-static void wacom_tpc_finger_in(struct wacom_wac *wacom, void *wcombo, char *data, int idx)
+static void wacom_tpc_finger_in(struct wacom_wac *wacom, char *data, int idx)
 {
-	wacom_report_abs(wcombo, ABS_X,
-		(data[2 + idx * 2] & 0xff) | ((data[3 + idx * 2] & 0x7f) << 8));
-	wacom_report_abs(wcombo, ABS_Y,
-		(data[6 + idx * 2] & 0xff) | ((data[7 + idx * 2] & 0x7f) << 8));
-	wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
-	wacom_report_key(wcombo, wacom->tool[idx], 1);
-	if (idx)
-		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-	else
-		wacom_report_key(wcombo, BTN_TOUCH, 1);
+	struct input_dev *input = wacom->input;
+	int finger = idx + 1;
+	int x = le16_to_cpup((__le16 *)&data[finger * 2]) & 0x7fff;
+	int y = le16_to_cpup((__le16 *)&data[4 + finger * 2]) & 0x7fff;
+
+	/*
+	 * Work around input core suppressing "duplicate" events since
+	 * we are abusing ABS_X/ABS_Y to transmit multi-finger data.
+	 * This should go away once we switch to true multitouch
+	 * protocol.
+	 */
+	if (wacom->last_finger != finger) {
+		if (x == input->abs[ABS_X])
+			x++;
+
+		if (y == input->abs[ABS_Y])
+			y++;
+	}
+
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_MISC, wacom->id[0]);
+	input_report_key(input, wacom->tool[finger], 1);
+	if (!idx)
+		input_report_key(input, BTN_TOUCH, 1);
+	input_event(input, EV_MSC, MSC_SERIAL, finger);
+	input_sync(wacom->input);
+
+	wacom->last_finger = finger;
 }
 
-static void wacom_tpc_touch_out(struct wacom_wac *wacom, void *wcombo, int idx)
+static void wacom_tpc_touch_out(struct wacom_wac *wacom, int idx)
 {
-	wacom_report_abs(wcombo, ABS_X, 0);
-	wacom_report_abs(wcombo, ABS_Y, 0);
-	wacom_report_abs(wcombo, ABS_MISC, 0);
-	wacom_report_key(wcombo, wacom->tool[idx], 0);
-	if (idx)
-		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-	else
-		wacom_report_key(wcombo, BTN_TOUCH, 0);
-	return;
+	struct input_dev *input = wacom->input;
+	int finger = idx + 1;
+
+	input_report_abs(input, ABS_X, 0);
+	input_report_abs(input, ABS_Y, 0);
+	input_report_abs(input, ABS_MISC, 0);
+	input_report_key(input, wacom->tool[finger], 0);
+	if (!idx)
+		input_report_key(input, BTN_TOUCH, 0);
+	input_event(input, EV_MSC, MSC_SERIAL, finger);
+	input_sync(input);
 }
 
-static void wacom_tpc_touch_in(struct wacom_wac *wacom, void *wcombo)
+static void wacom_tpc_touch_in(struct wacom_wac *wacom, size_t len)
 {
 	char *data = wacom->data;
-	struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
-	static int firstFinger = 0;
-	static int secondFinger = 0;
+	struct input_dev *input = wacom->input;
 
-	wacom->tool[0] = BTN_TOOL_DOUBLETAP;
+	wacom->tool[1] = BTN_TOOL_DOUBLETAP;
 	wacom->id[0] = TOUCH_DEVICE_ID;
-	wacom->tool[1] = BTN_TOOL_TRIPLETAP;
+	wacom->tool[2] = BTN_TOOL_TRIPLETAP;
+
+	if (len != WACOM_PKGLEN_TPC1FG) {
 
-	if (urb->actual_length != WACOM_PKGLEN_TPC1FG) {
 		switch (data[0]) {
-			case WACOM_REPORT_TPC1FG:
-				wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
-				wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
-				wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
-				wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
-				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
-				wacom_report_key(wcombo, wacom->tool[0], 1);
-				break;
-			case WACOM_REPORT_TPC2FG:
-				/* keep this byte to send proper out-prox event */
-				wacom->id[1] = data[1] & 0x03;
-
-				if (data[1] & 0x01) {
-					wacom_tpc_finger_in(wacom, wcombo, data, 0);
-					firstFinger = 1;
-				} else if (firstFinger) {
-					wacom_tpc_touch_out(wacom, wcombo, 0);
-				}
 
-				if (data[1] & 0x02) {
-					/* sync first finger data */
-					if (firstFinger)
-						wacom_input_sync(wcombo);
+		case WACOM_REPORT_TPC1FG:
+			input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
+			input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
+			input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
+			input_report_key(input, BTN_TOUCH, le16_to_cpup((__le16 *)&data[6]));
+			input_report_abs(input, ABS_MISC, wacom->id[0]);
+			input_report_key(input, wacom->tool[1], 1);
+			input_sync(input);
+			break;
 
-					wacom_tpc_finger_in(wacom, wcombo, data, 1);
-					secondFinger = 1;
-				} else if (secondFinger) {
-					/* sync first finger data */
-					if (firstFinger)
-						wacom_input_sync(wcombo);
+		case WACOM_REPORT_TPC2FG:
+			if (data[1] & 0x01)
+				wacom_tpc_finger_in(wacom, data, 0);
+			else if (wacom->id[1] & 0x01)
+				wacom_tpc_touch_out(wacom, 0);
 
-					wacom_tpc_touch_out(wacom, wcombo, 1);
-					secondFinger = 0;
-				}
-				if (!(data[1] & 0x01))
-					firstFinger = 0;
-				break;
+			if (data[1] & 0x02)
+				wacom_tpc_finger_in(wacom, data, 1);
+			else if (wacom->id[1] & 0x02)
+				wacom_tpc_touch_out(wacom, 1);
+			break;
 		}
 	} else {
-		wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
-		wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
-		wacom_report_key(wcombo, BTN_TOUCH, 1);
-		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
-		wacom_report_key(wcombo, wacom->tool[0], 1);
+		input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
+		input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
+		input_report_key(input, BTN_TOUCH, 1);
+		input_report_abs(input, ABS_MISC, wacom->id[1]);
+		input_report_key(input, wacom->tool[1], 1);
+		input_sync(input);
 	}
-	return;
 }
 
-static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 {
 	struct wacom_features *features = &wacom->features;
 	char *data = wacom->data;
-	int prox = 0, pressure, idx = -1;
-	static int stylusInProx, touchInProx = 1, touchOut;
-	struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+	struct input_dev *input = wacom->input;
+	int prox = 0, pressure;
+	int retval = 0;
 
 	dbg("wacom_tpc_irq: received report #%d", data[0]);
 
-	if (urb->actual_length == WACOM_PKGLEN_TPC1FG || /* single touch */
+	if (len == WACOM_PKGLEN_TPC1FG ||		 /* single touch */
 	    data[0] == WACOM_REPORT_TPC1FG ||		 /* single touch */
 	    data[0] == WACOM_REPORT_TPC2FG) {		 /* 2FG touch */
-		if (urb->actual_length == WACOM_PKGLEN_TPC1FG) {  /* with touch */
+
+		if (wacom->shared->stylus_in_proximity) {
+			if (wacom->id[1] & 0x01)
+				wacom_tpc_touch_out(wacom, 0);
+
+			if (wacom->id[1] & 0x02)
+				wacom_tpc_touch_out(wacom, 1);
+
+			wacom->id[1] = 0;
+			return 0;
+		}
+
+		if (len == WACOM_PKGLEN_TPC1FG) {	/* with touch */
 			prox = data[0] & 0x01;
 		} else {  /* with capacity */
 			if (data[0] == WACOM_REPORT_TPC1FG)
@@ -745,168 +741,264 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
 				prox = data[1] & 0x03;
 		}
 
-		if (!stylusInProx) { /* stylus not in prox */
-			if (prox) {
-				if (touchInProx) {
-					wacom_tpc_touch_in(wacom, wcombo);
-					touchOut = 1;
-					return 1;
-				}
-			} else {
+		if (prox) {
+			if (!wacom->id[1])
+				wacom->last_finger = 1;
+			wacom_tpc_touch_in(wacom, len);
+		} else {
+			if (data[0] == WACOM_REPORT_TPC2FG) {
 				/* 2FGT out-prox */
-				if (data[0] == WACOM_REPORT_TPC2FG) {
-					idx = (wacom->id[1] & 0x01) - 1;
-					if (idx == 0) {
-						wacom_tpc_touch_out(wacom, wcombo, idx);
-						/* sync first finger event */
-						if (wacom->id[1] & 0x02)
-							wacom_input_sync(wcombo);
-					}
-					idx = (wacom->id[1] & 0x02) - 1;
-					if (idx == 1)
-						wacom_tpc_touch_out(wacom, wcombo, idx);
-				} else /* one finger touch */
-					wacom_tpc_touch_out(wacom, wcombo, 0);
-				touchOut = 0;
-				touchInProx = 1;
-				return 1;
-			}
-		} else if (touchOut || !prox) { /* force touch out-prox */
-			wacom_tpc_touch_out(wacom, wcombo, 0);
-			touchOut = 0;
-			touchInProx = 1;
-			return 1;
+				if (wacom->id[1] & 0x01)
+					wacom_tpc_touch_out(wacom, 0);
+
+				if (wacom->id[1] & 0x02)
+					wacom_tpc_touch_out(wacom, 1);
+			} else
+				/* one finger touch */
+				wacom_tpc_touch_out(wacom, 0);
+
+			wacom->id[0] = 0;
 		}
+		/* keep prox bit to send proper out-prox event */
+		wacom->id[1] = prox;
 	} else if (data[0] == WACOM_REPORT_PENABLED) { /* Penabled */
 		prox = data[1] & 0x20;
 
-		touchInProx = 0;
+		if (!wacom->shared->stylus_in_proximity) { /* first in prox */
+			/* Going into proximity select tool */
+			wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+			if (wacom->tool[0] == BTN_TOOL_PEN)
+				wacom->id[0] = STYLUS_DEVICE_ID;
+			else
+				wacom->id[0] = ERASER_DEVICE_ID;
 
-		if (prox) { /* in prox */
-			if (!wacom->id[0]) {
-				/* Going into proximity select tool */
-				wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-				if (wacom->tool[0] == BTN_TOOL_PEN)
-					wacom->id[0] = STYLUS_DEVICE_ID;
-				else
-					wacom->id[0] = ERASER_DEVICE_ID;
-			}
-			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
-			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
-			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
-			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
-			pressure = ((data[7] & 0x01) << 8) | data[6];
-			if (pressure < 0)
-				pressure = features->pressure_max + pressure + 1;
-			wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
-			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
-		} else {
-			wacom_report_abs(wcombo, ABS_X, 0);
-			wacom_report_abs(wcombo, ABS_Y, 0);
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
+			wacom->shared->stylus_in_proximity = true;
+		}
+		input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+		input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
+		input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
+		input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
+		pressure = ((data[7] & 0x01) << 8) | data[6];
+		if (pressure < 0)
+			pressure = features->pressure_max + pressure + 1;
+		input_report_abs(input, ABS_PRESSURE, pressure);
+		input_report_key(input, BTN_TOUCH, data[1] & 0x05);
+		if (!prox) { /* out-prox */
 			wacom->id[0] = 0;
-			/* pen is out so touch can be enabled now */
-			touchInProx = 1;
+			wacom->shared->stylus_in_proximity = false;
 		}
-		wacom_report_key(wcombo, wacom->tool[0], prox);
-		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
-		stylusInProx = prox;
-		return 1;
+		input_report_key(input, wacom->tool[0], prox);
+		input_report_abs(input, ABS_MISC, wacom->id[0]);
+		retval = 1;
 	}
-	return 0;
+	return retval;
 }
 
-int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
+void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 {
+	bool sync;
+
 	switch (wacom_wac->features.type) {
-		case PENPARTNER:
-			return wacom_penpartner_irq(wacom_wac, wcombo);
-
-		case PL:
-			return wacom_pl_irq(wacom_wac, wcombo);
-
-		case WACOM_G4:
-		case GRAPHIRE:
-		case WACOM_MO:
-			return wacom_graphire_irq(wacom_wac, wcombo);
-
-		case PTU:
-			return wacom_ptu_irq(wacom_wac, wcombo);
-
-		case INTUOS:
-		case INTUOS3S:
-		case INTUOS3:
-		case INTUOS3L:
-		case INTUOS4S:
-		case INTUOS4:
-		case INTUOS4L:
-		case CINTIQ:
-		case WACOM_BEE:
-			return wacom_intuos_irq(wacom_wac, wcombo);
-
-		case TABLETPC:
-		case TABLETPC2FG:
-			return wacom_tpc_irq(wacom_wac, wcombo);
-
-		default:
-			return 0;
+	case PENPARTNER:
+		sync = wacom_penpartner_irq(wacom_wac);
+		break;
+
+	case PL:
+		sync = wacom_pl_irq(wacom_wac);
+		break;
+
+	case WACOM_G4:
+	case GRAPHIRE:
+	case WACOM_MO:
+		sync = wacom_graphire_irq(wacom_wac);
+		break;
+
+	case PTU:
+		sync = wacom_ptu_irq(wacom_wac);
+		break;
+
+	case INTUOS:
+	case INTUOS3S:
+	case INTUOS3:
+	case INTUOS3L:
+	case INTUOS4S:
+	case INTUOS4:
+	case INTUOS4L:
+	case CINTIQ:
+	case WACOM_BEE:
+		sync = wacom_intuos_irq(wacom_wac);
+		break;
+
+	case TABLETPC:
+	case TABLETPC2FG:
+		sync = wacom_tpc_irq(wacom_wac, len);
+		break;
+
+	default:
+		sync = false;
+		break;
 	}
-	return 0;
+
+	if (sync)
+		input_sync(wacom_wac->input);
+}
+
+static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
+{
+	struct input_dev *input_dev = wacom_wac->input;
+
+	input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
+	input_set_capability(input_dev, EV_REL, REL_WHEEL);
+
+	__set_bit(BTN_LEFT, input_dev->keybit);
+	__set_bit(BTN_RIGHT, input_dev->keybit);
+	__set_bit(BTN_MIDDLE, input_dev->keybit);
+	__set_bit(BTN_SIDE, input_dev->keybit);
+	__set_bit(BTN_EXTRA, input_dev->keybit);
+
+	__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+	__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+	__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
+	__set_bit(BTN_TOOL_BRUSH, input_dev->keybit);
+	__set_bit(BTN_TOOL_PENCIL, input_dev->keybit);
+	__set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit);
+	__set_bit(BTN_TOOL_LENS, input_dev->keybit);
+	__set_bit(BTN_STYLUS, input_dev->keybit);
+	__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_DISTANCE,
+			     0, wacom_wac->features.distance_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+	input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
+	input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
 }
 
-void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+void wacom_setup_input_capabilities(struct input_dev *input_dev,
+				    struct wacom_wac *wacom_wac)
 {
+	struct wacom_features *features = &wacom_wac->features;
+	int i;
+
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+
+	__set_bit(ABS_MISC, input_dev->absbit);
+
 	switch (wacom_wac->features.type) {
-		case WACOM_MO:
-			input_dev_mo(input_dev, wacom_wac);
-		case WACOM_G4:
-			input_dev_g4(input_dev, wacom_wac);
-			/* fall through */
-		case GRAPHIRE:
-			input_dev_g(input_dev, wacom_wac);
-			break;
-		case WACOM_BEE:
-			input_dev_bee(input_dev, wacom_wac);
-		case INTUOS3:
-		case INTUOS3L:
-		case CINTIQ:
-			input_dev_i3(input_dev, wacom_wac);
-			/* fall through */
-		case INTUOS3S:
-			input_dev_i3s(input_dev, wacom_wac);
-			/* fall through */
-		case INTUOS:
-			input_dev_i(input_dev, wacom_wac);
-			break;
-		case INTUOS4:
-		case INTUOS4L:
-			input_dev_i4(input_dev, wacom_wac);
-			/* fall through */
-		case INTUOS4S:
-			input_dev_i4s(input_dev, wacom_wac);
-			input_dev_i(input_dev, wacom_wac);
-			break;
-		case TABLETPC2FG:
-			input_dev_tpc2fg(input_dev, wacom_wac);
-			/* fall through */
-		case TABLETPC:
-			input_dev_tpc(input_dev, wacom_wac);
-			if (wacom_wac->features.device_type != BTN_TOOL_PEN)
-				break;  /* no need to process stylus stuff */
-
-			/* fall through */
-		case PL:
-		case PTU:
-			input_dev_pl(input_dev, wacom_wac);
-			/* fall through */
-		case PENPARTNER:
-			input_dev_pt(input_dev, wacom_wac);
-			break;
+	case WACOM_MO:
+		__set_bit(BTN_1, input_dev->keybit);
+		__set_bit(BTN_5, input_dev->keybit);
+
+		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
+		/* fall through */
+
+	case WACOM_G4:
+		input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
+
+		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+		__set_bit(BTN_0, input_dev->keybit);
+		__set_bit(BTN_4, input_dev->keybit);
+		/* fall through */
+
+	case GRAPHIRE:
+		input_set_capability(input_dev, EV_REL, REL_WHEEL);
+
+		__set_bit(BTN_LEFT, input_dev->keybit);
+		__set_bit(BTN_RIGHT, input_dev->keybit);
+		__set_bit(BTN_MIDDLE, input_dev->keybit);
+
+		__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+		__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
+		__set_bit(BTN_STYLUS, input_dev->keybit);
+		__set_bit(BTN_STYLUS2, input_dev->keybit);
+		break;
+
+	case WACOM_BEE:
+		__set_bit(BTN_8, input_dev->keybit);
+		__set_bit(BTN_9, input_dev->keybit);
+		/* fall through */
+
+	case INTUOS3:
+	case INTUOS3L:
+	case CINTIQ:
+		__set_bit(BTN_4, input_dev->keybit);
+		__set_bit(BTN_5, input_dev->keybit);
+		__set_bit(BTN_6, input_dev->keybit);
+		__set_bit(BTN_7, input_dev->keybit);
+
+		input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+		/* fall through */
+
+	case INTUOS3S:
+		__set_bit(BTN_0, input_dev->keybit);
+		__set_bit(BTN_1, input_dev->keybit);
+		__set_bit(BTN_2, input_dev->keybit);
+		__set_bit(BTN_3, input_dev->keybit);
+
+		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+
+		input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+		/* fall through */
+
+	case INTUOS:
+		wacom_setup_intuos(wacom_wac);
+		break;
+
+	case INTUOS4:
+	case INTUOS4L:
+		__set_bit(BTN_7, input_dev->keybit);
+		__set_bit(BTN_8, input_dev->keybit);
+		/* fall through */
+
+	case INTUOS4S:
+		for (i = 0; i < 7; i++)
+			__set_bit(BTN_0 + i, input_dev->keybit);
+		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+
+		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+		wacom_setup_intuos(wacom_wac);
+		break;
+
+	case TABLETPC2FG:
+		if (features->device_type == BTN_TOOL_TRIPLETAP) {
+			__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+			input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
+		}
+		/* fall through */
+
+	case TABLETPC:
+		if (features->device_type == BTN_TOOL_DOUBLETAP ||
+		    features->device_type == BTN_TOOL_TRIPLETAP) {
+			input_set_abs_params(input_dev, ABS_RX, 0, features->x_phy, 0, 0);
+			input_set_abs_params(input_dev, ABS_RY, 0, features->y_phy, 0, 0);
+			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+		}
+
+		if (features->device_type != BTN_TOOL_PEN)
+			break;  /* no need to process stylus stuff */
+
+		/* fall through */
+
+	case PL:
+	case PTU:
+		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+		__set_bit(BTN_STYLUS, input_dev->keybit);
+		__set_bit(BTN_STYLUS2, input_dev->keybit);
+		/* fall through */
+
+	case PENPARTNER:
+		__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+		break;
 	}
-	return;
 }
 
 static const struct wacom_features wacom_features_0x00 =
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index b50cf04e61a..063f1af3204 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -9,6 +9,8 @@
 #ifndef WACOM_WAC_H
 #define WACOM_WAC_H
 
+#include <linux/types.h>
+
 /* maximum packet length for USB devices */
 #define WACOM_PKGLEN_MAX	32
 
@@ -71,13 +73,20 @@ struct wacom_features {
 	unsigned char unitExpo;
 };
 
+struct wacom_shared {
+	bool stylus_in_proximity;
+};
+
 struct wacom_wac {
 	char name[64];
 	unsigned char *data;
-	int tool[2];
-	int id[2];
+	int tool[3];
+	int id[3];
 	__u32 serial[2];
+	int last_finger;
 	struct wacom_features features;
+	struct wacom_shared *shared;
+	struct input_dev *input;
 };
 
 #endif
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6c0f1712f55..b9f58ca82fd 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -119,6 +119,18 @@ config TOUCHSCREEN_DYNAPRO
 	  To compile this driver as a module, choose M here: the
 	  module will be called dynapro.
 
+config TOUCHSCREEN_HAMPSHIRE
+	tristate "Hampshire serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Hampshire serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hampshire.
+
 config TOUCHSCREEN_EETI
 	tristate "EETI touchscreen panel support"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 41145d074de..8ad36eef90a 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
+obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c
new file mode 100644
index 00000000000..2da6cc31bb2
--- /dev/null
+++ b/drivers/input/touchscreen/hampshire.c
@@ -0,0 +1,205 @@
+/*
+ * Hampshire serial touchscreen driver
+ *
+ * Copyright (c) 2010 Adam Bennett
+ * Based on the dynapro driver (c) Tias Guns
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2010/04/08 Adam Bennett <abennett72@gmail.com>
+ *   Copied dynapro.c and edited for Hampshire 4-byte protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Hampshire serial touchscreen driver"
+
+MODULE_AUTHOR("Adam Bennett <abennett72@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40
+#define HAMPSHIRE_FORMAT_LENGTH 4
+#define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80
+
+#define HAMPSHIRE_MIN_XC 0
+#define HAMPSHIRE_MAX_XC 0x1000
+#define HAMPSHIRE_MIN_YC 0
+#define HAMPSHIRE_MAX_YC 0x1000
+
+#define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6))
+#define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9))
+#define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct hampshire {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[HAMPSHIRE_FORMAT_LENGTH];
+	char phys[32];
+};
+
+static void hampshire_process_data(struct hampshire *phampshire)
+{
+	struct input_dev *dev = phampshire->dev;
+
+	if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) {
+		input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data));
+		input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data));
+		input_report_key(dev, BTN_TOUCH,
+				 HAMPSHIRE_GET_TOUCHED(phampshire->data));
+		input_sync(dev);
+
+		phampshire->idx = 0;
+	}
+}
+
+static irqreturn_t hampshire_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct hampshire *phampshire = serio_get_drvdata(serio);
+
+	phampshire->data[phampshire->idx] = data;
+
+	if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0])
+		hampshire_process_data(phampshire);
+	else
+		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+			phampshire->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+static void hampshire_disconnect(struct serio *serio)
+{
+	struct hampshire *phampshire = serio_get_drvdata(serio);
+
+	input_get_device(phampshire->dev);
+	input_unregister_device(phampshire->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(phampshire->dev);
+	kfree(phampshire);
+}
+
+/*
+ * hampshire_connect() is the routine that is called when someone adds a
+ * new serio device that supports hampshire protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int hampshire_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct hampshire *phampshire;
+	struct input_dev *input_dev;
+	int err;
+
+	phampshire = kzalloc(sizeof(struct hampshire), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!phampshire || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	phampshire->serio = serio;
+	phampshire->dev = input_dev;
+	snprintf(phampshire->phys, sizeof(phampshire->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Hampshire Serial TouchScreen";
+	input_dev->phys = phampshire->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_HAMPSHIRE;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(phampshire->dev, ABS_X,
+			     HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0);
+	input_set_abs_params(phampshire->dev, ABS_Y,
+			     HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, phampshire);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(phampshire->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(phampshire);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id hampshire_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_HAMPSHIRE,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, hampshire_serio_ids);
+
+static struct serio_driver hampshire_drv = {
+	.driver		= {
+		.name	= "hampshire",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= hampshire_serio_ids,
+	.interrupt	= hampshire_interrupt,
+	.connect	= hampshire_connect,
+	.disconnect	= hampshire_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init hampshire_init(void)
+{
+	return serio_register_driver(&hampshire_drv);
+}
+
+static void __exit hampshire_exit(void)
+{
+	serio_unregister_driver(&hampshire_drv);
+}
+
+module_init(hampshire_init);
+module_exit(hampshire_exit);
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index be23780e8a3..769b479fcaa 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -347,6 +347,8 @@ static int __devexit tsc2007_remove(struct i2c_client *client)
 	struct tsc2007	*ts = i2c_get_clientdata(client);
 	struct tsc2007_platform_data *pdata = client->dev.platform_data;
 
+	i2c_set_clientdata(client, NULL);
+
 	tsc2007_free_irq(ts);
 
 	if (pdata->exit_platform_hw)
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 99330bbdbac..0b0ae2e17a6 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -811,12 +811,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch)
 
 	priv = usbtouch->priv;
 
-	priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL);
+	priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
+				GFP_KERNEL);
 	if (!priv->ack_buf)
 		goto err_priv;
 
-	memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt));
-
 	priv->ack = usb_alloc_urb(0, GFP_KERNEL);
 	if (!priv->ack) {
 		dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 5109bf3dd85..cbfef1ea7e3 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -200,7 +200,7 @@ void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
 	mutex_lock(&wm->codec_mutex);
 	reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
 
-	if (status & WM97XX_GPIO_HIGH)
+	if (status == WM97XX_GPIO_HIGH)
 		reg |= gpio;
 	else
 		reg &= ~gpio;