Input: move USB tablets under drivers/input/tablet

This will allow concentrating all input devices in one place
in {menu|x|q}config.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>

10 files changed, 5065 insertions, 0 deletions

diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
new file mode 100644
index 00000000000..12dfb0eb326
--- /dev/null
+++ b/drivers/input/tablet/Kconfig
@@ -0,0 +1,74 @@
+#
+# Tablet driver configuration
+#
+menuconfig INPUT_TABLET
+	bool "Tablets"
+	help
+	  Say Y here, and a list of supported tablets will be displayed.
+	  This option doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_TABLET
+
+config TABLET_USB_ACECAD
+	tristate "Acecad Flair tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Acecad Flair
+	  tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acecad.
+
+config TABLET_USB_AIPTEK
+	tristate "Aiptek 6000U/8000U tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Aiptek 6000U
+	  or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aiptek.
+
+config TABLET_USB_GTCO
+        tristate "GTCO CalComp/InterWrite USB Support"
+        depends on USB && INPUT
+        help
+          Say Y here if you want to use the USB version of the GTCO
+          CalComp/InterWrite Tablet.  Make sure to say Y to "Mouse support"
+          (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+          (CONFIG_INPUT_EVDEV) as well.
+
+          To compile this driver as a module, choose M here: the
+          module will be called gtco.
+
+config TABLET_USB_KBTAB
+	tristate "KB Gear JamStudio tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the KB Gear
+	  JamStudio tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kbtab.
+
+config TABLET_USB_WACOM
+	tristate "Wacom Intuos/Graphire tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Wacom Intuos
+	  or Graphire tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wacom.
+
+endif
diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile
new file mode 100644
index 00000000000..ce8b9a9cfa4
--- /dev/null
+++ b/drivers/input/tablet/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the tablet drivers
+#
+
+# Multipart objects.
+wacom-objs	:= wacom_wac.o wacom_sys.o
+
+obj-$(CONFIG_TABLET_USB_ACECAD)	+= acecad.o
+obj-$(CONFIG_TABLET_USB_AIPTEK)	+= aiptek.o
+obj-$(CONFIG_TABLET_USB_GTCO)	+= gtco.o
+obj-$(CONFIG_TABLET_USB_KBTAB)	+= kbtab.o
+obj-$(CONFIG_TABLET_USB_WACOM)	+= wacom.o
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
new file mode 100644
index 00000000000..dd2310458c4
--- /dev/null
+++ b/drivers/input/tablet/acecad.c
@@ -0,0 +1,289 @@
+/*
+ *  Copyright (c) 2001-2005 Edouard TISSERANT   <edouard.tisserant@wanadoo.fr>
+ *  Copyright (c) 2004-2005 Stephane VOLTZ      <svoltz@numericable.fr>
+ *
+ *  USB Acecad "Acecad Flair" tablet support
+ *
+ *  Changelog:
+ *      v3.2 - Added sysfs support
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v3.2"
+#define DRIVER_DESC    "USB Acecad Flair tablet driver"
+#define DRIVER_LICENSE "GPL"
+#define DRIVER_AUTHOR  "Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_ACECAD	0x0460
+#define USB_DEVICE_ID_FLAIR	0x0004
+#define USB_DEVICE_ID_302	0x0008
+
+struct usb_acecad {
+	char name[128];
+	char phys[64];
+	struct usb_device *usbdev;
+	struct input_dev *input;
+	struct urb *irq;
+
+	unsigned char *data;
+	dma_addr_t data_dma;
+};
+
+static void usb_acecad_irq(struct urb *urb)
+{
+	struct usb_acecad *acecad = urb->context;
+	unsigned char *data = acecad->data;
+	struct input_dev *dev = acecad->input;
+	int prox, status;
+
+	switch (urb->status) {
+		case 0:
+			/* success */
+			break;
+		case -ECONNRESET:
+		case -ENOENT:
+		case -ESHUTDOWN:
+			/* this urb is terminated, clean up */
+			dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+			return;
+		default:
+			dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+			goto resubmit;
+	}
+
+	prox = (data[0] & 0x04) >> 2;
+	input_report_key(dev, BTN_TOOL_PEN, prox);
+
+	if (prox) {
+		int x = data[1] | (data[2] << 8);
+		int y = data[3] | (data[4] << 8);
+		/* Pressure should compute the same way for flair and 302 */
+		int pressure = data[5] | (data[6] << 8);
+		int touch = data[0] & 0x01;
+		int stylus = (data[0] & 0x10) >> 4;
+		int stylus2 = (data[0] & 0x20) >> 5;
+		input_report_abs(dev, ABS_X, x);
+		input_report_abs(dev, ABS_Y, y);
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+		input_report_key(dev, BTN_TOUCH, touch);
+		input_report_key(dev, BTN_STYLUS, stylus);
+		input_report_key(dev, BTN_STYLUS2, stylus2);
+	}
+
+	/* event termination */
+	input_sync(dev);
+
+resubmit:
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status)
+		err("can't resubmit intr, %s-%s/input0, status %d",
+			acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
+}
+
+static int usb_acecad_open(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = input_get_drvdata(dev);
+
+	acecad->irq->dev = acecad->usbdev;
+	if (usb_submit_urb(acecad->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void usb_acecad_close(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = input_get_drvdata(dev);
+
+	usb_kill_urb(acecad->irq);
+}
+
+static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *interface = intf->cur_altsetting;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_acecad *acecad;
+	struct input_dev *input_dev;
+	int pipe, maxp;
+	int err = -ENOMEM;
+
+	if (interface->desc.bNumEndpoints != 1)
+		return -ENODEV;
+
+	endpoint = &interface->endpoint[0].desc;
+
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+	acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!acecad || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	acecad->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &acecad->data_dma);
+	if (!acecad->data) {
+		err= -ENOMEM;
+		goto fail1;
+	}
+
+	acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acecad->irq) {
+		err = -ENOMEM;
+		goto fail2;
+	}
+
+	acecad->usbdev = dev;
+	acecad->input = input_dev;
+
+	if (dev->manufacturer)
+		strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(acecad->name, " ", sizeof(acecad->name));
+		strlcat(acecad->name, dev->product, sizeof(acecad->name));
+	}
+
+	usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
+	strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
+
+	input_dev->name = acecad->name;
+	input_dev->phys = acecad->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, acecad);
+
+	input_dev->open = usb_acecad_open;
+	input_dev->close = usb_acecad_close;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+	input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+	input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
+
+	switch (id->driver_info) {
+		case 0:
+			input_dev->absmax[ABS_X] = 5000;
+			input_dev->absmax[ABS_Y] = 3750;
+			input_dev->absmax[ABS_PRESSURE] = 512;
+			if (!strlen(acecad->name))
+				snprintf(acecad->name, sizeof(acecad->name),
+					"USB Acecad Flair Tablet %04x:%04x",
+					le16_to_cpu(dev->descriptor.idVendor),
+					le16_to_cpu(dev->descriptor.idProduct));
+			break;
+		case 1:
+			input_dev->absmax[ABS_X] = 3000;
+			input_dev->absmax[ABS_Y] = 2250;
+			input_dev->absmax[ABS_PRESSURE] = 1024;
+			if (!strlen(acecad->name))
+				snprintf(acecad->name, sizeof(acecad->name),
+					"USB Acecad 302 Tablet %04x:%04x",
+					le16_to_cpu(dev->descriptor.idVendor),
+					le16_to_cpu(dev->descriptor.idProduct));
+			break;
+	}
+
+	input_dev->absfuzz[ABS_X] = 4;
+	input_dev->absfuzz[ABS_Y] = 4;
+
+	usb_fill_int_urb(acecad->irq, dev, pipe,
+			acecad->data, maxp > 8 ? 8 : maxp,
+			usb_acecad_irq, acecad, endpoint->bInterval);
+	acecad->irq->transfer_dma = acecad->data_dma;
+	acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	err = input_register_device(acecad->input);
+	if (err)
+		goto fail2;
+
+	usb_set_intfdata(intf, acecad);
+
+	return 0;
+
+ fail2:	usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
+ fail1: input_free_device(input_dev);
+	kfree(acecad);
+	return err;
+}
+
+static void usb_acecad_disconnect(struct usb_interface *intf)
+{
+	struct usb_acecad *acecad = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (acecad) {
+		usb_kill_urb(acecad->irq);
+		input_unregister_device(acecad->input);
+		usb_free_urb(acecad->irq);
+		usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
+		kfree(acecad);
+	}
+}
+
+static struct usb_device_id usb_acecad_id_table [] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302),	 .driver_info = 1 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
+
+static struct usb_driver usb_acecad_driver = {
+	.name =		"usb_acecad",
+	.probe =	usb_acecad_probe,
+	.disconnect =	usb_acecad_disconnect,
+	.id_table =	usb_acecad_id_table,
+};
+
+static int __init usb_acecad_init(void)
+{
+	int result = usb_register(&usb_acecad_driver);
+	if (result == 0)
+		info(DRIVER_VERSION ":" DRIVER_DESC);
+	return result;
+}
+
+static void __exit usb_acecad_exit(void)
+{
+	usb_deregister(&usb_acecad_driver);
+}
+
+module_init(usb_acecad_init);
+module_exit(usb_acecad_exit);
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
new file mode 100644
index 00000000000..cc0a498763d
--- /dev/null
+++ b/drivers/input/tablet/aiptek.c
@@ -0,0 +1,2236 @@
+/*
+ *  Native support for the Aiptek HyperPen USB Tablets
+ *  (4000U/5000U/6000U/8000U/12000U)
+ *
+ *  Copyright (c) 2001      Chris Atenasio   <chris@crud.net>
+ *  Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
+ *
+ *  based on wacom.c by
+ *     Vojtech Pavlik      <vojtech@suse.cz>
+ *     Andreas Bach Aaen   <abach@stofanet.dk>
+ *     Clifford Wolf       <clifford@clifford.at>
+ *     Sam Mosel           <sam.mosel@computer.org>
+ *     James E. Blair      <corvus@gnu.org>
+ *     Daniel Egger        <egger@suse.de>
+ *
+ *  Many thanks to Oliver Kuechemann for his support.
+ *
+ *  ChangeLog:
+ *      v0.1 - Initial release
+ *      v0.2 - Hack to get around fake event 28's. (Bryan W. Headley)
+ *      v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002)
+ *             Released to Linux 2.4.19 and 2.5.x
+ *      v0.4 - Rewrote substantial portions of the code to deal with
+ *             corrected control sequences, timing, dynamic configuration,
+ *             support of 6000U - 12000U, procfs, and macro key support
+ *             (Jan-1-2003 - Feb-5-2003, Bryan W. Headley)
+ *      v1.0 - Added support for diagnostic messages, count of messages
+ *             received from URB - Mar-8-2003, Bryan W. Headley
+ *      v1.1 - added support for tablet resolution, changed DV and proximity
+ *             some corrections - Jun-22-2003, martin schneebacher
+ *           - Added support for the sysfs interface, deprecating the
+ *             procfs interface for 2.5.x kernel. Also added support for
+ *             Wheel command. Bryan W. Headley July-15-2003.
+ *      v1.2 - Reworked jitter timer as a kernel thread.
+ *             Bryan W. Headley November-28-2003/Jan-10-2004.
+ *      v1.3 - Repaired issue of kernel thread going nuts on single-processor
+ *             machines, introduced programmableDelay as a command line
+ *             parameter. Feb 7 2004, Bryan W. Headley.
+ *      v1.4 - Re-wire jitter so it does not require a thread. Courtesy of
+ *             Rene van Paassen. Added reporting of physical pointer device
+ *             (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know
+ *             for reports 1, 6.)
+ *             what physical device reports for reports 1, 6.) Also enabled
+ *             MOUSE and LENS tool button modes. Renamed "rubber" to "eraser".
+ *             Feb 20, 2004, Bryan W. Headley.
+ *      v1.5 - Added previousJitterable, so we don't do jitter delay when the
+ *             user is holding a button down for periods of time.
+ *
+ * NOTE:
+ *      This kernel driver is augmented by the "Aiptek" XFree86 input
+ *      driver for your X server, as well as the Gaiptek GUI Front-end
+ *      "Tablet Manager".
+ *      These three products are highly interactive with one another,
+ *      so therefore it's easier to document them all as one subsystem.
+ *      Please visit the project's "home page", located at,
+ *      http://aiptektablet.sourceforge.net.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.5 (May-15-2004)"
+#define DRIVER_AUTHOR  "Bryan W. Headley/Chris Atenasio"
+#define DRIVER_DESC    "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)"
+
+/*
+ * Aiptek status packet:
+ *
+ * (returned as Report 1 - relative coordinates from mouse and stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     0     1
+ * byte1   0     0     0     0     0    BS2   BS    Tip
+ * byte2  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ *
+ * (returned as Report 2 - absolute coordinates from the stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     1     0
+ * byte1  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte2  X15   X14   X13   X12   X11   X10   X9    X8
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ * byte4  Y15   Y14   Y13   Y12   Y11   Y10   Y9    Y8
+ * byte5   *     *     *    BS2   BS1   Tip   IR    DV
+ * byte6  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte7  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 3 - absolute coordinates from the mouse)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     1     0
+ * byte1  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte2  X15   X14   X13   X12   X11   X10   X9    X8
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ * byte4  Y15   Y14   Y13   Y12   Y11   Y10   Y9    Y8
+ * byte5   *     *     *    BS2   BS1   Tip   IR    DV
+ * byte6  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte7  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 4 - macrokeys from the stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     1     0     0
+ * byte1   0     0     0    BS2   BS    Tip   IR    DV
+ * byte2   0     0     0     0     0     0     1     0
+ * byte3   0     0     0    K4    K3    K2    K1    K0
+ * byte4  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte5  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 5 - macrokeys from the mouse)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     1     0     0
+ * byte1   0     0     0    BS2   BS    Tip   IR    DV
+ * byte2   0     0     0     0     0     0     1     0
+ * byte3   0     0     0    K4    K3    K2    K1    K0
+ * byte4  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte5  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * IR: In Range = Proximity on
+ * DV = Data Valid
+ * BS = Barrel Switch (as in, macro keys)
+ * BS2 also referred to as Tablet Pick
+ *
+ * Command Summary:
+ *
+ * Use report_type CONTROL (3)
+ * Use report_id   2
+ *
+ * Command/Data    Description     Return Bytes    Return Value
+ * 0x10/0x00       SwitchToMouse       0
+ * 0x10/0x01       SwitchToTablet      0
+ * 0x18/0x04       SetResolution       0
+ * 0x12/0xFF       AutoGainOn          0
+ * 0x17/0x00       FilterOn            0
+ * 0x01/0x00       GetXExtension       2           MaxX
+ * 0x01/0x01       GetYExtension       2           MaxY
+ * 0x02/0x00       GetModelCode        2           ModelCode = LOBYTE
+ * 0x03/0x00       GetODMCode          2           ODMCode
+ * 0x08/0x00       GetPressureLevels   2           =512
+ * 0x04/0x00       GetFirmwareVersion  2           Firmware Version
+ * 0x11/0x02       EnableMacroKeys     0
+ *
+ * To initialize the tablet:
+ *
+ * (1) Send Resolution500LPI (Command)
+ * (2) Query for Model code (Option Report)
+ * (3) Query for ODM code (Option Report)
+ * (4) Query for firmware (Option Report)
+ * (5) Query for GetXExtension (Option Report)
+ * (6) Query for GetYExtension (Option Report)
+ * (7) Query for GetPressureLevels (Option Report)
+ * (8) SwitchToTablet for Absolute coordinates, or
+ *     SwitchToMouse for Relative coordinates (Command)
+ * (9) EnableMacroKeys (Command)
+ * (10) FilterOn (Command)
+ * (11) AutoGainOn (Command)
+ *
+ * (Step 9 can be omitted, but you'll then have no function keys.)
+ */
+
+#define USB_VENDOR_ID_AIPTEK				0x08ca
+#define USB_REQ_GET_REPORT				0x01
+#define USB_REQ_SET_REPORT				0x09
+
+	/* PointerMode codes
+	 */
+#define AIPTEK_POINTER_ONLY_MOUSE_MODE			0
+#define AIPTEK_POINTER_ONLY_STYLUS_MODE			1
+#define AIPTEK_POINTER_EITHER_MODE			2
+
+#define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a)		\
+	(a == AIPTEK_POINTER_ONLY_MOUSE_MODE ||		\
+	 a == AIPTEK_POINTER_EITHER_MODE)
+#define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a)		\
+	(a == AIPTEK_POINTER_ONLY_STYLUS_MODE ||	\
+	 a == AIPTEK_POINTER_EITHER_MODE)
+
+	/* CoordinateMode code
+	 */
+#define AIPTEK_COORDINATE_RELATIVE_MODE			0
+#define AIPTEK_COORDINATE_ABSOLUTE_MODE			1
+
+       /* XTilt and YTilt values
+        */
+#define AIPTEK_TILT_MIN					(-128)
+#define AIPTEK_TILT_MAX					127
+#define AIPTEK_TILT_DISABLE				(-10101)
+
+	/* Wheel values
+	 */
+#define AIPTEK_WHEEL_MIN				0
+#define AIPTEK_WHEEL_MAX				1024
+#define AIPTEK_WHEEL_DISABLE				(-10101)
+
+	/* ToolCode values, which BTW are 0x140 .. 0x14f
+	 * We have things set up such that if TOOL_BUTTON_FIRED_BIT is
+	 * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx.
+	 *
+	 * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will
+	 * get reset.
+	 */
+#define TOOL_BUTTON(x)					((x) & 0x14f)
+#define TOOL_BUTTON_FIRED(x)				((x) & 0x200)
+#define TOOL_BUTTON_FIRED_BIT				0x200
+	/* toolMode codes
+	 */
+#define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
+#define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
+#define AIPTEK_TOOL_BUTTON_PENCIL_MODE			BTN_TOOL_PENCIL
+#define AIPTEK_TOOL_BUTTON_BRUSH_MODE			BTN_TOOL_BRUSH
+#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE		BTN_TOOL_AIRBRUSH
+#define AIPTEK_TOOL_BUTTON_ERASER_MODE			BTN_TOOL_RUBBER
+#define AIPTEK_TOOL_BUTTON_MOUSE_MODE			BTN_TOOL_MOUSE
+#define AIPTEK_TOOL_BUTTON_LENS_MODE			BTN_TOOL_LENS
+
+	/* Diagnostic message codes
+	 */
+#define AIPTEK_DIAGNOSTIC_NA				0
+#define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE	1
+#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE	2
+#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED		3
+
+	/* Time to wait (in ms) to help mask hand jittering
+	 * when pressing the stylus buttons.
+	 */
+#define AIPTEK_JITTER_DELAY_DEFAULT			50
+
+	/* Time to wait (in ms) in-between sending the tablet
+	 * a command and beginning the process of reading the return
+	 * sequence from the tablet.
+	 */
+#define AIPTEK_PROGRAMMABLE_DELAY_25		25
+#define AIPTEK_PROGRAMMABLE_DELAY_50		50
+#define AIPTEK_PROGRAMMABLE_DELAY_100		100
+#define AIPTEK_PROGRAMMABLE_DELAY_200		200
+#define AIPTEK_PROGRAMMABLE_DELAY_300		300
+#define AIPTEK_PROGRAMMABLE_DELAY_400		400
+#define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT	AIPTEK_PROGRAMMABLE_DELAY_400
+
+	/* Mouse button programming
+	 */
+#define AIPTEK_MOUSE_LEFT_BUTTON		0x01
+#define AIPTEK_MOUSE_RIGHT_BUTTON		0x02
+#define AIPTEK_MOUSE_MIDDLE_BUTTON		0x04
+
+	/* Stylus button programming
+	 */
+#define AIPTEK_STYLUS_LOWER_BUTTON		0x08
+#define AIPTEK_STYLUS_UPPER_BUTTON		0x10
+
+	/* Length of incoming packet from the tablet
+	 */
+#define AIPTEK_PACKET_LENGTH			8
+
+	/* We report in EV_MISC both the proximity and
+	 * whether the report came from the stylus, tablet mouse
+	 * or "unknown" -- Unknown when the tablet is in relative
+	 * mode, because we only get report 1's.
+	 */
+#define AIPTEK_REPORT_TOOL_UNKNOWN		0x10
+#define AIPTEK_REPORT_TOOL_STYLUS		0x20
+#define AIPTEK_REPORT_TOOL_MOUSE		0x40
+
+static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT;
+static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT;
+
+struct aiptek_features {
+	int odmCode;		/* Tablet manufacturer code       */
+	int modelCode;		/* Tablet model code (not unique) */
+	int firmwareCode;	/* prom/eeprom version            */
+	char usbPath[64 + 1];	/* device's physical usb path     */
+	char inputPath[64 + 1];	/* input device path              */
+};
+
+struct aiptek_settings {
+	int pointerMode;	/* stylus-, mouse-only or either */
+	int coordinateMode;	/* absolute/relative coords      */
+	int toolMode;		/* pen, pencil, brush, etc. tool */
+	int xTilt;		/* synthetic xTilt amount        */
+	int yTilt;		/* synthetic yTilt amount        */
+	int wheel;		/* synthetic wheel amount        */
+	int stylusButtonUpper;	/* stylus upper btn delivers...  */
+	int stylusButtonLower;	/* stylus lower btn delivers...  */
+	int mouseButtonLeft;	/* mouse left btn delivers...    */
+	int mouseButtonMiddle;	/* mouse middle btn delivers...  */
+	int mouseButtonRight;	/* mouse right btn delivers...   */
+	int programmableDelay;	/* delay for tablet programming  */
+	int jitterDelay;	/* delay for hand jittering      */
+};
+
+struct aiptek {
+	struct input_dev *inputdev;		/* input device struct           */
+	struct usb_device *usbdev;		/* usb device struct             */
+	struct urb *urb;			/* urb for incoming reports      */
+	dma_addr_t data_dma;			/* our dma stuffage              */
+	struct aiptek_features features;	/* tablet's array of features    */
+	struct aiptek_settings curSetting;	/* tablet's current programmable */
+	struct aiptek_settings newSetting;	/* ... and new param settings    */
+	unsigned int ifnum;			/* interface number for IO       */
+	int diagnostic;				/* tablet diagnostic codes       */
+	unsigned long eventCount;		/* event count                   */
+	int inDelay;				/* jitter: in jitter delay?      */
+	unsigned long endDelay;			/* jitter: time when delay ends  */
+	int previousJitterable;			/* jitterable prev value     */
+	unsigned char *data;			/* incoming packet data          */
+};
+
+/*
+ * Permit easy lookup of keyboard events to send, versus
+ * the bitmap which comes from the tablet. This hides the
+ * issue that the F_keys are not sequentially numbered.
+ */
+static const int macroKeyEvents[] = {
+	KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5,
+	KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11,
+	KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17,
+	KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23,
+	KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO,
+	KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0
+};
+
+/***********************************************************************
+ * Relative reports deliver values in 2's complement format to
+ * deal with negative offsets.
+ */
+static int aiptek_convert_from_2s_complement(unsigned char c)
+{
+	int ret;
+	unsigned char b = c;
+	int negate = 0;
+
+	if ((b & 0x80) != 0) {
+		b = ~b;
+		b--;
+		negate = 1;
+	}
+	ret = b;
+	ret = (negate == 1) ? -ret : ret;
+	return ret;
+}
+
+/***********************************************************************
+ * aiptek_irq can receive one of six potential reports.
+ * The documentation for each is in the body of the function.
+ *
+ * The tablet reports on several attributes per invocation of
+ * aiptek_irq. Because the Linux Input Event system allows the
+ * transmission of ONE attribute per input_report_xxx() call,
+ * collation has to be done on the other end to reconstitute
+ * a complete tablet report. Further, the number of Input Event reports
+ * submitted varies, depending on what USB report type, and circumstance.
+ * To deal with this, EV_MSC is used to indicate an 'end-of-report'
+ * message. This has been an undocumented convention understood by the kernel
+ * tablet driver and clients such as gpm and XFree86's tablet drivers.
+ *
+ * Of the information received from the tablet, the one piece I
+ * cannot transmit is the proximity bit (without resorting to an EV_MSC
+ * convention above.) I therefore have taken over REL_MISC and ABS_MISC
+ * (for relative and absolute reports, respectively) for communicating
+ * Proximity. Why two events? I thought it interesting to know if the
+ * Proximity event occurred while the tablet was in absolute or relative
+ * mode.
+ *
+ * Other tablets use the notion of a certain minimum stylus pressure
+ * to infer proximity. While that could have been done, that is yet
+ * another 'by convention' behavior, the documentation for which
+ * would be spread between two (or more) pieces of software.
+ *
+ * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and
+ * replaced with the input_sync() method (which emits EV_SYN.)
+ */
+
+static void aiptek_irq(struct urb *urb)
+{
+	struct aiptek *aiptek = urb->context;
+	unsigned char *data = aiptek->data;
+	struct input_dev *inputdev = aiptek->inputdev;
+	int jitterable = 0;
+	int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
+
+	switch (urb->status) {
+	case 0:
+		/* Success */
+		break;
+
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* This urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __FUNCTION__, urb->status);
+		return;
+
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	/* See if we are in a delay loop -- throw out report if true.
+	 */
+	if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) {
+		goto exit;
+	}
+
+	aiptek->inDelay = 0;
+	aiptek->eventCount++;
+
+	/* Report 1 delivers relative coordinates with either a stylus
+	 * or the mouse. You do not know, however, which input
+	 * tool generated the event.
+	 */
+	if (data[0] == 1) {
+		if (aiptek->curSetting.coordinateMode ==
+		    AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+			aiptek->diagnostic =
+			    AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
+		} else {
+			x = aiptek_convert_from_2s_complement(data[2]);
+			y = aiptek_convert_from_2s_complement(data[3]);
+
+			/* jitterable keeps track of whether any button has been pressed.
+			 * We're also using it to remap the physical mouse button mask
+			 * to pseudo-settings. (We don't specifically care about it's
+			 * value after moving/transposing mouse button bitmasks, except
+			 * that a non-zero value indicates that one or more
+			 * mouse button was pressed.)
+			 */
+			jitterable = data[5] & 0x07;
+
+			left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+			right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+			middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+
+			input_report_key(inputdev, BTN_LEFT, left);
+			input_report_key(inputdev, BTN_MIDDLE, middle);
+			input_report_key(inputdev, BTN_RIGHT, right);
+			input_report_rel(inputdev, REL_X, x);
+			input_report_rel(inputdev, REL_Y, y);
+			input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+
+			/* Wheel support is in the form of a single-event
+			 * firing.
+			 */
+			if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+				input_report_rel(inputdev, REL_WHEEL,
+						 aiptek->curSetting.wheel);
+				aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+			}
+			input_sync(inputdev);
+		}
+	}
+	/* Report 2 is delivered only by the stylus, and delivers
+	 * absolute coordinates.
+	 */
+	else if (data[0] == 2) {
+		if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+		} else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE
+			    (aiptek->curSetting.pointerMode)) {
+				aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+		} else {
+			x = le16_to_cpu(get_unaligned((__le16 *) (data + 1)));
+			y = le16_to_cpu(get_unaligned((__le16 *) (data + 3)));
+			z = le16_to_cpu(get_unaligned((__le16 *) (data + 6)));
+
+			p = (data[5] & 0x01) != 0 ? 1 : 0;
+			dv = (data[5] & 0x02) != 0 ? 1 : 0;
+			tip = (data[5] & 0x04) != 0 ? 1 : 0;
+
+			/* Use jitterable to re-arrange button masks
+			 */
+			jitterable = data[5] & 0x18;
+
+			bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+			pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+			/* dv indicates 'data valid' (e.g., the tablet is in sync
+			 * and has delivered a "correct" report) We will ignore
+			 * all 'bad' reports...
+			 */
+			if (dv != 0) {
+				/* If we've not already sent a tool_button_?? code, do
+				 * so now. Then set FIRED_BIT so it won't be resent unless
+				 * the user forces FIRED_BIT off.
+				 */
+				if (TOOL_BUTTON_FIRED
+				    (aiptek->curSetting.toolMode) == 0) {
+					input_report_key(inputdev,
+							 TOOL_BUTTON(aiptek->curSetting.toolMode),
+							 1);
+					aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+				}
+
+				if (p != 0) {
+					input_report_abs(inputdev, ABS_X, x);
+					input_report_abs(inputdev, ABS_Y, y);
+					input_report_abs(inputdev, ABS_PRESSURE, z);
+
+					input_report_key(inputdev, BTN_TOUCH, tip);
+					input_report_key(inputdev, BTN_STYLUS, bs);
+					input_report_key(inputdev, BTN_STYLUS2, pck);
+
+					if (aiptek->curSetting.xTilt !=
+					    AIPTEK_TILT_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_TILT_X,
+								 aiptek->curSetting.xTilt);
+					}
+					if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_TILT_Y,
+								 aiptek->curSetting.yTilt);
+					}
+
+					/* Wheel support is in the form of a single-event
+					 * firing.
+					 */
+					if (aiptek->curSetting.wheel !=
+					    AIPTEK_WHEEL_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_WHEEL,
+								 aiptek->curSetting.wheel);
+						aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+					}
+				}