Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()
  Input: cy8ctmg110 - capacitive touchscreen support
  Input: keyboard - also match braille-only keyboards
  Input: adp5588-keys - export unused GPIO pins
  Input: xpad - add product ID for Hori Fighting Stick EX2
  Input: adxl34x - fix leak and use after free
  Input: samsung-keypad - Add samsung keypad driver
  Input: i8042 - reset keyboard controller wehen resuming from S2R
  Input: synaptics - set min/max for finger width
  Input: synaptics - only report width on hardware that supports it
  Input: evdev - signal that device is writable in evdev_poll()
  Input: mousedev - signal that device is writable in mousedev_poll()
  Input: change input handlers to use bool when possible
  Input: document the MT event slot protocol
  Input: introduce MT event slots
  Input: usbtouchscreen - implement reset_resume
  Input: usbtouchscreen - implement runtime power management
  Input: usbtouchscreen - implement basic suspend/resume
  Input: Add ATMEL QT602240 touchscreen driver
  Input: fix signedness warning in input_set_keycode()
  ...

1 files changed, 145 insertions, 0 deletions

diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c
new file mode 100644
index 00000000000..782de9e8982
--- /dev/null
+++ b/drivers/input/misc/adxl34x-spi.c
@@ -0,0 +1,145 @@
+/*
+ * ADLX345/346 Three-Axis Digital Accelerometers (SPI Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_SPI */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include "adxl34x.h"
+
+#define MAX_SPI_FREQ_HZ		5000000
+#define MAX_FREQ_NO_FIFODELAY	1500000
+#define ADXL34X_CMD_MULTB	(1 << 6)
+#define ADXL34X_CMD_READ	(1 << 7)
+#define ADXL34X_WRITECMD(reg)	(reg & 0x3F)
+#define ADXL34X_READCMD(reg)	(ADXL34X_CMD_READ | (reg & 0x3F))
+#define ADXL34X_READMB_CMD(reg) (ADXL34X_CMD_READ | ADXL34X_CMD_MULTB \
+					| (reg & 0x3F))
+
+static int adxl34x_spi_read(struct device *dev, unsigned char reg)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char cmd;
+
+	cmd = ADXL34X_READCMD(reg);
+
+	return spi_w8r8(spi, cmd);
+}
+
+static int adxl34x_spi_write(struct device *dev,
+			     unsigned char reg, unsigned char val)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	buf[0] = ADXL34X_WRITECMD(reg);
+	buf[1] = val;
+
+	return spi_write(spi, buf, sizeof(buf));
+}
+
+static int adxl34x_spi_read_block(struct device *dev,
+				  unsigned char reg, int count,
+				  void *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	ssize_t status;
+
+	reg = ADXL34X_READMB_CMD(reg);
+	status = spi_write_then_read(spi, &reg, 1, buf, count);
+
+	return (status < 0) ? status : 0;
+}
+
+static const struct adxl34x_bus_ops adx134x_spi_bops = {
+	.bustype	= BUS_SPI,
+	.write		= adxl34x_spi_write,
+	.read		= adxl34x_spi_read,
+	.read_block	= adxl34x_spi_read_block,
+};
+
+static int __devinit adxl34x_spi_probe(struct spi_device *spi)
+{
+	struct adxl34x *ac;
+
+	/* don't exceed max specified SPI CLK frequency */
+	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+		dev_err(&spi->dev, "SPI CLK %d Hz too fast\n", spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	ac = adxl34x_probe(&spi->dev, spi->irq,
+			   spi->max_speed_hz > MAX_FREQ_NO_FIFODELAY,
+			   &adx134x_spi_bops);
+
+	if (IS_ERR(ac))
+		return PTR_ERR(ac);
+
+	spi_set_drvdata(spi, ac);
+
+	return 0;
+}
+
+static int __devexit adxl34x_spi_remove(struct spi_device *spi)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	return adxl34x_remove(ac);
+}
+
+#ifdef CONFIG_PM
+static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	adxl34x_suspend(ac);
+
+	return 0;
+}
+
+static int adxl34x_spi_resume(struct spi_device *spi)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	adxl34x_resume(ac);
+
+	return 0;
+}
+#else
+# define adxl34x_spi_suspend NULL
+# define adxl34x_spi_resume  NULL
+#endif
+
+static struct spi_driver adxl34x_driver = {
+	.driver = {
+		.name = "adxl34x",
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe   = adxl34x_spi_probe,
+	.remove  = __devexit_p(adxl34x_spi_remove),
+	.suspend = adxl34x_spi_suspend,
+	.resume  = adxl34x_spi_resume,
+};
+
+static int __init adxl34x_spi_init(void)
+{
+	return spi_register_driver(&adxl34x_driver);
+}
+module_init(adxl34x_spi_init);
+
+static void __exit adxl34x_spi_exit(void)
+{
+	spi_unregister_driver(&adxl34x_driver);
+}
+module_exit(adxl34x_spi_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer SPI Bus Driver");
+MODULE_LICENSE("GPL");