Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer updates from Dmitry Torokhov:
 "First set of updates for the input subsystem.  You will get a new
  touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx
  SoC, large update to Atmel mXT touchscreen driver, a lot of drivers
  acquired device tree support and a slew of other fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: add MELFAS mms114 touchscreen driver
  Input: add support for key scan interface of the LPC32xx SoC
  Input: omap4-keypad - add device tree support
  Input: hanwang - add support for Art Master II tablet
  Input: spear_keyboard - reconfigure operating frequency on suspend
  Input: spear_keyboard - fix clock handling during suspend/resume
  Input: ff-memless - fix a couple min_t() casts
  Input: synaptics - print firmware ID and board number at init
  Input: spear_keyboard - generalize keyboard frequency configuration
  Input: spear_keyboard - rename bit definitions to reflect register
  Input: spear_keyboard - use correct io accessors
  Input: spear-keyboard - fix disable device_init_wakeup in remove
  Input: wacom_i2c - fix compiler warning
  Input: imx_keypad - check error returned by clk_prepare_enable()
  Input: imx_keypad - adapt the new kpp clock name
  Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare()
  Input: ad7879 - add option to correct xy axis
  Input: synaptics_usb - Remove TrackPoint name trailing whitespace
  Revert "Input: atmel_mxt_ts - warn if sysfs could not be created"
  Input: MT - Include win8 support
  ...

8 files changed, 649 insertions, 122 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c0e11ecc646..c50fa75416f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -332,6 +332,16 @@ config KEYBOARD_LOCOMO
 	  To compile this driver as a module, choose M here: the
 	  module will be called locomokbd.
 
+config KEYBOARD_LPC32XX
+	tristate "LPC32XX matrix key scanner support"
+	depends on ARCH_LPC32XX && OF
+	help
+	  Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
+	  connected to a key matrix.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lpc32xx-keys.
+
 config KEYBOARD_MAPLE
 	tristate "Maple bus keyboard"
 	depends on SH_DREAMCAST && MAPLE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index b03b02456a8..44e76002f54 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
 obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
 obj-$(CONFIG_KEYBOARD_LM8333)		+= lm8333.o
 obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
+obj-$(CONFIG_KEYBOARD_LPC32XX)		+= lpc32xx-keys.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 62bfce468f9..cbb1add43d5 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -559,7 +559,6 @@ static int gpio_keys_get_devtree_pdata(struct device *dev,
 	pdata->rep = !!of_get_property(node, "autorepeat", NULL);
 
 	/* First count the subnodes */
-	pdata->nbuttons = 0;
 	pp = NULL;
 	while ((pp = of_get_next_child(node, pp)))
 		pdata->nbuttons++;
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index 6ee7421e232..ff4c0a87a25 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -378,20 +378,24 @@ static void imx_keypad_close(struct input_dev *dev)
 	imx_keypad_inhibit(keypad);
 
 	/* Disable clock unit */
-	clk_disable(keypad->clk);
+	clk_disable_unprepare(keypad->clk);
 }
 
 static int imx_keypad_open(struct input_dev *dev)
 {
 	struct imx_keypad *keypad = input_get_drvdata(dev);
+	int error;
 
 	dev_dbg(&dev->dev, ">%s\n", __func__);
 
+	/* Enable the kpp clock */
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
+
 	/* We became active from now */
 	keypad->enabled = true;
 
-	/* Enable the kpp clock */
-	clk_enable(keypad->clk);
 	imx_keypad_config(keypad);
 
 	/* Sanity control, not all the rows must be actived now. */
@@ -467,7 +471,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 		goto failed_free_priv;
 	}
 
-	keypad->clk = clk_get(&pdev->dev, "kpp");
+	keypad->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(keypad->clk)) {
 		dev_err(&pdev->dev, "failed to get keypad clock\n");
 		error = PTR_ERR(keypad->clk);
@@ -581,7 +585,7 @@ static int imx_kbd_suspend(struct device *dev)
 	mutex_lock(&input_dev->mutex);
 
 	if (input_dev->users)
-		clk_disable(kbd->clk);
+		clk_disable_unprepare(kbd->clk);
 
 	mutex_unlock(&input_dev->mutex);
 
@@ -596,18 +600,23 @@ static int imx_kbd_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct imx_keypad *kbd = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = kbd->input_dev;
+	int ret = 0;
 
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(kbd->irq);
 
 	mutex_lock(&input_dev->mutex);
 
-	if (input_dev->users)
-		clk_enable(kbd->clk);
+	if (input_dev->users) {
+		ret = clk_prepare_enable(kbd->clk);
+		if (ret)
+			goto err_clk;
+	}
 
+err_clk:
 	mutex_unlock(&input_dev->mutex);
 
-	return 0;
+	return ret;
 }
 #endif
 
diff --git a/drivers/input/keyboard/lpc32xx-keys.c b/drivers/input/keyboard/lpc32xx-keys.c
new file mode 100644
index 00000000000..dd786c8a758
--- /dev/null
+++ b/drivers/input/keyboard/lpc32xx-keys.c
@@ -0,0 +1,394 @@
+/*
+ * NXP LPC32xx SoC Key Scan Interface
+ *
+ * Authors:
+ *    Kevin Wells <kevin.wells@nxp.com>
+ *    Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * This controller supports square key matrices from 1x1 up to 8x8
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/input/matrix_keypad.h>
+
+#define DRV_NAME				"lpc32xx_keys"
+
+/*
+ * Key scanner register offsets
+ */
+#define LPC32XX_KS_DEB(x)			((x) + 0x00)
+#define LPC32XX_KS_STATE_COND(x)		((x) + 0x04)
+#define LPC32XX_KS_IRQ(x)			((x) + 0x08)
+#define LPC32XX_KS_SCAN_CTL(x)			((x) + 0x0C)
+#define LPC32XX_KS_FAST_TST(x)			((x) + 0x10)
+#define LPC32XX_KS_MATRIX_DIM(x)		((x) + 0x14) /* 1..8 */
+#define LPC32XX_KS_DATA(x, y)			((x) + 0x40 + ((y) << 2))
+
+#define LPC32XX_KSCAN_DEB_NUM_DEB_PASS(n)	((n) & 0xFF)
+
+#define LPC32XX_KSCAN_SCOND_IN_IDLE		0x0
+#define LPC32XX_KSCAN_SCOND_IN_SCANONCE		0x1
+#define LPC32XX_KSCAN_SCOND_IN_IRQGEN		0x2
+#define LPC32XX_KSCAN_SCOND_IN_SCAN_MATRIX	0x3
+
+#define LPC32XX_KSCAN_IRQ_PENDING_CLR		0x1
+
+#define LPC32XX_KSCAN_SCTRL_SCAN_DELAY(n)	((n) & 0xFF)
+
+#define LPC32XX_KSCAN_FTST_FORCESCANONCE	0x1
+#define LPC32XX_KSCAN_FTST_USE32K_CLK		0x2
+
+#define LPC32XX_KSCAN_MSEL_SELECT(n)		((n) & 0xF)
+
+struct lpc32xx_kscan_drv {
+	struct input_dev *input;
+	struct clk *clk;
+	struct resource *iores;
+	void __iomem *kscan_base;
+	unsigned int irq;
+
+	u32 matrix_sz;		/* Size of matrix in XxY, ie. 3 = 3x3 */
+	u32 deb_clks;		/* Debounce clocks (based on 32KHz clock) */
+	u32 scan_delay;		/* Scan delay (based on 32KHz clock) */
+
+	unsigned short *keymap;	/* Pointer to key map for the scan matrix */
+	unsigned int row_shift;
+
+	u8 lastkeystates[8];
+};
+
+static void lpc32xx_mod_states(struct lpc32xx_kscan_drv *kscandat, int col)
+{
+	struct input_dev *input = kscandat->input;
+	unsigned row, changed, scancode, keycode;
+	u8 key;
+
+	key = readl(LPC32XX_KS_DATA(kscandat->kscan_base, col));
+	changed = key ^ kscandat->lastkeystates[col];
+	kscandat->lastkeystates[col] = key;
+
+	for (row = 0; changed; row++, changed >>= 1) {
+		if (changed & 1) {
+			/* Key state changed, signal an event */
+			scancode = MATRIX_SCAN_CODE(row, col,
+						    kscandat->row_shift);
+			keycode = kscandat->keymap[scancode];
+			input_event(input, EV_MSC, MSC_SCAN, scancode);
+			input_report_key(input, keycode, key & (1 << row));
+		}
+	}
+}
+
+static irqreturn_t lpc32xx_kscan_irq(int irq, void *dev_id)
+{
+	struct lpc32xx_kscan_drv *kscandat = dev_id;
+	int i;
+
+	for (i = 0; i < kscandat->matrix_sz; i++)
+		lpc32xx_mod_states(kscandat, i);
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+
+	input_sync(kscandat->input);
+
+	return IRQ_HANDLED;
+}
+
+static int lpc32xx_kscan_open(struct input_dev *dev)
+{
+	struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
+	int error;
+
+	error = clk_prepare_enable(kscandat->clk);
+	if (error)
+		return error;
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+
+	return 0;
+}
+
+static void lpc32xx_kscan_close(struct input_dev *dev)
+{
+	struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
+
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	clk_disable_unprepare(kscandat->clk);
+}
+
+static int __devinit lpc32xx_parse_dt(struct device *dev,
+				      struct lpc32xx_kscan_drv *kscandat)
+{
+	struct device_node *np = dev->of_node;
+	u32 rows = 0, columns = 0;
+
+	of_property_read_u32(np, "keypad,num-rows", &rows);
+	of_property_read_u32(np, "keypad,num-columns", &columns);
+	if (!rows || rows != columns) {
+		dev_err(dev,
+			"rows and columns must be specified and be equal!\n");
+		return -EINVAL;
+	}
+
+	kscandat->matrix_sz = rows;
+	kscandat->row_shift = get_count_order(columns);
+
+	of_property_read_u32(np, "nxp,debounce-delay-ms", &kscandat->deb_clks);
+	of_property_read_u32(np, "nxp,scan-delay-ms", &kscandat->scan_delay);
+	if (!kscandat->deb_clks || !kscandat->scan_delay) {
+		dev_err(dev, "debounce or scan delay not specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __devinit lpc32xx_kscan_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_kscan_drv *kscandat;
+	struct input_dev *input;
+	struct resource *res;
+	size_t keymap_size;
+	int error;
+	int irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform I/O memory\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0 || irq >= NR_IRQS) {
+		dev_err(&pdev->dev, "failed to get platform irq\n");
+		return -EINVAL;
+	}
+
+	kscandat = kzalloc(sizeof(struct lpc32xx_kscan_drv), GFP_KERNEL);
+	if (!kscandat) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	error = lpc32xx_parse_dt(&pdev->dev, kscandat);
+	if (error) {
+		dev_err(&pdev->dev, "failed to parse device tree\n");
+		goto err_free_mem;
+	}
+
+	keymap_size = sizeof(kscandat->keymap[0]) *
+				(kscandat->matrix_sz << kscandat->row_shift);
+	kscandat->keymap = kzalloc(keymap_size, GFP_KERNEL);
+	if (!kscandat->keymap) {
+		dev_err(&pdev->dev, "could not allocate memory for keymap\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kscandat->input = input = input_allocate_device();
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		error = -ENOMEM;
+		goto err_free_keymap;
+	}
+
+	/* Setup key input */
+	input->name		= pdev->name;
+	input->phys		= "lpc32xx/input0";
+	input->id.vendor	= 0x0001;
+	input->id.product	= 0x0001;
+	input->id.version	= 0x0100;
+	input->open		= lpc32xx_kscan_open;
+	input->close		= lpc32xx_kscan_close;
+	input->dev.parent	= &pdev->dev;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   kscandat->matrix_sz,
+					   kscandat->matrix_sz,
+					   kscandat->keymap, kscandat->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_free_input;
+	}
+
+	input_set_drvdata(kscandat->input, kscandat);
+
+	kscandat->iores = request_mem_region(res->start, resource_size(res),
+					     pdev->name);
+	if (!kscandat->iores) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		error = -EBUSY;
+		goto err_free_input;
+	}
+
+	kscandat->kscan_base = ioremap(kscandat->iores->start,
+				       resource_size(kscandat->iores));
+	if (!kscandat->kscan_base) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -EBUSY;
+		goto err_release_memregion;
+	}
+
+	/* Get the key scanner clock */
+	kscandat->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kscandat->clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		error = PTR_ERR(kscandat->clk);
+		goto err_unmap;
+	}
+
+	/* Configure the key scanner */
+	error = clk_prepare_enable(kscandat->clk);
+	if (error)
+		goto err_clk_put;
+
+	writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base));
+	writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base));
+	writel(LPC32XX_KSCAN_FTST_USE32K_CLK,
+	       LPC32XX_KS_FAST_TST(kscandat->kscan_base));
+	writel(kscandat->matrix_sz,
+	       LPC32XX_KS_MATRIX_DIM(kscandat->kscan_base));
+	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	clk_disable_unprepare(kscandat->clk);
+
+	error = request_irq(irq, lpc32xx_kscan_irq, 0, pdev->name, kscandat);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		goto err_clk_put;
+	}
+
+	error = input_register_device(kscandat->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	platform_set_drvdata(pdev, kscandat);
+	return 0;
+
+err_free_irq:
+	free_irq(irq, kscandat);
+err_clk_put:
+	clk_put(kscandat->clk);
+err_unmap:
+	iounmap(kscandat->kscan_base);
+err_release_memregion:
+	release_mem_region(kscandat->iores->start,
+			   resource_size(kscandat->iores));
+err_free_input:
+	input_free_device(kscandat->input);
+err_free_keymap:
+	kfree(kscandat->keymap);
+err_free_mem:
+	kfree(kscandat);
+
+	return error;
+}
+
+static int __devexit lpc32xx_kscan_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+
+	free_irq(platform_get_irq(pdev, 0), kscandat);
+	clk_put(kscandat->clk);
+	iounmap(kscandat->kscan_base);
+	release_mem_region(kscandat->iores->start,
+			   resource_size(kscandat->iores));
+	input_unregister_device(kscandat->input);
+	kfree(kscandat->keymap);
+	kfree(kscandat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lpc32xx_kscan_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+	struct input_dev *input = kscandat->input;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		/* Clear IRQ and disable clock */
+		writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+		clk_disable_unprepare(kscandat->clk);
+	}
+
+	mutex_unlock(&input->mutex);
+	return 0;
+}
+
+static int lpc32xx_kscan_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+	struct input_dev *input = kscandat->input;
+	int retval = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		/* Enable clock and clear IRQ */
+		retval = clk_prepare_enable(kscandat->clk);
+		if (retval == 0)
+			writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+	}
+
+	mutex_unlock(&input->mutex);
+	return retval;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lpc32xx_kscan_pm_ops, lpc32xx_kscan_suspend,
+			 lpc32xx_kscan_resume);
+
+static const struct of_device_id lpc32xx_kscan_match[] = {
+	{ .compatible = "nxp,lpc3220-key" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match);
+
+static struct platform_driver lpc32xx_kscan_driver = {
+	.probe		= lpc32xx_kscan_probe,
+	.remove		= __devexit_p(lpc32xx_kscan_remove),
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &lpc32xx_kscan_pm_ops,
+		.of_match_table = of_match_ptr(lpc32xx_kscan_match),
+	}
+};
+
+module_platform_driver(lpc32xx_kscan_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("Key scanner driver for LPC32XX devices");
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
index 4ea4341a68c..a880e741420 100644
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -49,6 +49,7 @@
 #define SKE_ASR3	0x2C
 
 #define SKE_NUM_ASRX_REGISTERS	(4)
+#define	KEY_PRESSED_DELAY	10
 
 /**
  * struct ske_keypad  - data structure used by keypad driver
@@ -92,7 +93,7 @@ static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
 static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
 {
 	u32 value;
-	int timeout = 50;
+	int timeout = keypad->board->debounce_ms;
 
 	/* check SKE_RIS to be 0 */
 	while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
@@ -135,12 +136,37 @@ static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
 	return 0;
 }
 
-static void ske_keypad_read_data(struct ske_keypad *keypad)
+static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
 {
+	int row = 0, code, pos;
 	struct input_dev *input = keypad->input;
-	u16 status;
-	int col = 0, row = 0, code;
-	int ske_asr, ske_ris, key_pressed, i;
+	u32 ske_ris;
+	int key_pressed;
+	int num_of_rows;
+
+	/* find out the row */
+	num_of_rows = hweight8(status);
+	do {
+		pos = __ffs(status);
+		row = pos;
+		status &= ~(1 << pos);
+
+		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
+		ske_ris = readl(keypad->reg_base + SKE_RIS);
+		key_pressed = ske_ris & SKE_KPRISA;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], key_pressed);
+		input_sync(input);
+		num_of_rows--;
+	} while (num_of_rows);
+}
+
+static void ske_keypad_read_data(struct ske_keypad *keypad)
+{
+	u8 status;
+	int col = 0;
+	int ske_asr, i;
 
 	/*
 	 * Read the auto scan registers
@@ -154,44 +180,38 @@ static void ske_keypad_read_data(struct ske_keypad *keypad)
 		if (!ske_asr)
 			continue;
 
-		/* now that ASRx is zero, find out the column x and row y*/
-		if (ske_asr & 0xff) {
+		/* now that ASRx is zero, find out the coloumn x and row y */
+		status = ske_asr & 0xff;
+		if (status) {
 			col = i * 2;
-			status = ske_asr & 0xff;
-		} else {
+			ske_keypad_report(keypad, status, col);
+		}
+		status = (ske_asr & 0xff00) >> 8;
+		if (status) {
 			col = (i * 2) + 1;
-			status = (ske_asr & 0xff00) >> 8;
+			ske_keypad_report(keypad, status, col);
 		}
-
-		/* find out the row */
-		row = __ffs(status);
-
-		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
-		ske_ris = readl(keypad->reg_base + SKE_RIS);
-		key_pressed = ske_ris & SKE_KPRISA;
-
-		input_event(input, EV_MSC, MSC_SCAN, code);
-		input_report_key(input, keypad->keymap[code], key_pressed);
-		input_sync(input);
 	}
 }
 
 static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
 {
 	struct ske_keypad *keypad = dev_id;
-	int retries = 20;
+	int timeout = keypad->board->debounce_ms;
 
 	/* disable auto scan interrupt; mask the interrupt generated */
 	ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
 	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
 
-	while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --retries)
-		msleep(5);
+	while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout)
+		cpu_relax();
 
-	if (retries) {
-		/* SKEx registers are stable and can be read */
-		ske_keypad_read_data(keypad);
-	}
+	/* SKEx registers are stable and can be read */
+	ske_keypad_read_data(keypad);
+
+	/* wait until raw interrupt is clear */
+	while ((readl(keypad->reg_base + SKE_RIS)) && --timeout)
+		msleep(KEY_PRESSED_DELAY);
 
 	/* enable auto scan interrupts */
 	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index aed5f6999ce..c05f98c4141 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -27,6 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
@@ -84,8 +85,9 @@ struct omap4_keypad {
 	u32 reg_offset;
 	u32 irqreg_offset;
 	unsigned int row_shift;
+	bool no_autorepeat;
 	unsigned char key_state[8];
-	unsigned short keymap[];
+	unsigned short *keymap;
 };
 
 static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
@@ -208,25 +210,51 @@ static void omap4_keypad_close(struct input_dev *input)
 	pm_runtime_put_sync(input->dev.parent);
 }
 
+#ifdef CONFIG_OF
+static int __devinit omap4_keypad_parse_dt(struct device *dev,
+					   struct omap4_keypad *keypad_data)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!np) {
+		dev_err(dev, "missing DT data");
+		return -EINVAL;
+	}
+
+	of_property_read_u32(np, "keypad,num-rows", &keypad_data->rows);
+	of_property_read_u32(np, "keypad,num-columns", &keypad_data->cols);
+	if (!keypad_data->rows || !keypad_data->cols) {
+		dev_err(dev, "number of keypad rows/columns not specified\n");
+		return -EINVAL;
+	}
+
+	if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+		keypad_data->no_autorepeat = true;
+
+	return 0;
+}
+#else
+static inline int omap4_keypad_parse_dt(struct device *dev,
+					struct omap4_keypad *keypad_data)
+{
+	return -ENOSYS;
+}
+#endif
+
 static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 {
-	const struct omap4_keypad_platform_data *pdata;
+	const struct omap4_keypad_platform_data *pdata =
+				dev_get_platdata(&pdev->dev);
+	const struct matrix_keymap_data *keymap_data =
+				pdata ? pdata->keymap_data : NULL;
 	struct omap4_keypad *keypad_data;
 	struct input_dev *input_dev;
 	struct resource *res;
-	resource_size_t size;
-	unsigned int row_shift, max_keys;
+	unsigned int max_keys;
 	int rev;
 	int irq;
 	int error;
 
-	/* platform data */
-	pdata = pdev->dev.platform_data;
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		return -EINVAL;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "no base address specified\n");
@@ -239,25 +267,24 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (!pdata->keymap_data) {
-		dev_err(&pdev->dev, "no keymap data defined\n");
-		return -EINVAL;
-	}
-
-	row_shift = get_count_order(pdata->cols);
-	max_keys = pdata->rows << row_shift;
-
-	keypad_data = kzalloc(sizeof(struct omap4_keypad) +
-				max_keys * sizeof(keypad_data->keymap[0]),
-			      GFP_KERNEL);
+	keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
 	if (!keypad_data) {
 		dev_err(&pdev->dev, "keypad_data memory allocation failed\n");
 		return -ENOMEM;
 	}
 
-	size = resource_size(res);
+	keypad_data->irq = irq;
+
+	if (pdata) {
+		keypad_data->rows = pdata->rows;
+		keypad_data->cols = pdata->cols;
+	} else {
+		error = omap4_keypad_parse_dt(&pdev->dev, keypad_data);
+		if (error)
+			return error;
+	}
 
-	res = request_mem_region(res->start, size, pdev->name);
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
 	if (!res) {
 		dev_err(&pdev->dev, "can't request mem region\n");
 		error = -EBUSY;
@@ -271,15 +298,11 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 		goto err_release_mem;
 	}
 
-	keypad_data->irq = irq;
-	keypad_data->row_shift = row_shift;
-	keypad_data->rows = pdata->rows;
-	keypad_data->cols = pdata->cols;
 
 	/*
-	* Enable clocks for the keypad module so that we can read
-	* revision register.
-	*/
+	 * Enable clocks for the keypad module so that we can read
+	 * revision register.
+	 */
 	pm_runtime_enable(&pdev->dev);
 	error = pm_runtime_get_sync(&pdev->dev);
 	if (error) {
@@ -322,19 +345,30 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	input_dev->open = omap4_keypad_open;
 	input_dev->close = omap4_keypad_close;
 
-	error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
-					   pdata->rows, pdata->cols,
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	if (!keypad_data->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
+
+	input_set_drvdata(input_dev, keypad_data);
+
+	keypad_data->row_shift = get_count_order(keypad_data->cols);
+	max_keys = keypad_data->rows << keypad_data->row_shift;
+	keypad_data->keymap = kzalloc(max_keys * sizeof(keypad_data->keymap[0]),
+				      GFP_KERNEL);
+	if (!keypad_data->keymap) {
+		dev_err(&pdev->dev, "Not enough memory for keymap\n");
+		error = -ENOMEM;
+		goto err_free_input;
+	}
+
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   keypad_data->rows, keypad_data->cols,
 					   keypad_data->keymap, input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to build keymap\n");
-		goto err_free_input;
+		goto err_free_keymap;
 	}
 
-	__set_bit(EV_REP, input_dev->evbit);
-	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
-
-	input_set_drvdata(input_dev, keypad_data);
-
 	error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
 			     IRQF_TRIGGER_RISING,
 			     "omap4-keypad", keypad_data);
@@ -357,6 +391,8 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
 	free_irq(keypad_data->irq, keypad_data);
+err_free_keymap:
+	kfree(keypad_data->keymap);
 err_free_input:
 	input_free_device(input_dev);
 err_pm_put_sync:
@@ -364,7 +400,7 @@ err_pm_put_sync:
 err_unmap:
 	iounmap(keypad_data->base);
 err_release_mem:
-	release_mem_region(res->start, size);
+	release_mem_region(res->start, resource_size(res));
 err_free_keypad:
 	kfree(keypad_data);
 	return error;
@@ -386,18 +422,29 @@ static int __devexit omap4_keypad_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
+	kfree(keypad_data->keymap);
 	kfree(keypad_data);
+
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id omap_keypad_dt_match[] = {
+	{ .compatible = "ti,omap4-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_keypad_dt_match);
+#endif
+
 static struct platform_driver omap4_keypad_driver = {
 	.probe		= omap4_keypad_probe,
 	.remove		= __devexit_p(omap4_keypad_remove),
 	.driver		= {
 		.name	= "omap4-keypad",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(omap_keypad_dt_match),
 	},
 };
 module_platform_driver(omap4_keypad_driver);
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index 6f287f7e153..72ef01be336 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -27,33 +27,31 @@
 #include <plat/keyboard.h>
 
 /* Keyboard Registers */
-#define MODE_REG	0x00	/* 16 bit reg */
-#define STATUS_REG	0x0C	/* 2 bit reg */
-#define DATA_REG	0x10	/* 8 bit reg */
+#define MODE_CTL_REG	0x00
+#define STATUS_REG	0x0C
+#define DATA_REG	0x10
 #define INTR_MASK	0x54
 
 /* Register Values */
-/*
- * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode
- * control register as 1010010(82MHZ)
- */
-#define PCLK_FREQ_MSK	0xA400	/* 82 MHz */
-#define START_SCAN	0x0100
-#define SCAN_RATE_10	0x0000
-#define SCAN_RATE_20	0x0004
-#define SCAN_RATE_40	0x0008
-#define SCAN_RATE_80	0x000C
-#define MODE_KEYBOARD	0x0002
-#define DATA_AVAIL	0x2
-
-#define KEY_MASK	0xFF000000
-#define KEY_VALUE	0x00FFFFFF
-#define ROW_MASK	0xF0
-#define COLUMN_MASK	0x0F
 #define NUM_ROWS	16
 #define NUM_COLS	16
+#define MODE_CTL_PCLK_FREQ_SHIFT	9
+#define MODE_CTL_PCLK_FREQ_MSK		0x7F
+
+#define MODE_CTL_KEYBOARD	(0x2 << 0)
+#define MODE_CTL_SCAN_RATE_10	(0x0 << 2)
+#define MODE_CTL_SCAN_RATE_20	(0x1 << 2)
+#define MODE_CTL_SCAN_RATE_40	(0x2 << 2)
+#define MODE_CTL_SCAN_RATE_80	(0x3 << 2)
+#define MODE_CTL_KEYNUM_SHIFT	6
+#define MODE_CTL_START_SCAN	(0x1 << 8)
 
-#define KEY_MATRIX_SHIFT	6
+#define STATUS_DATA_AVAIL	(0x1 << 1)
+
+#define DATA_ROW_MASK		0xF0
+#define DATA_COLUMN_MASK	0x0F
+
+#define ROW_SHIFT		4
 
 struct spear_kbd {
 	struct input_dev *input;
@@ -65,6 +63,8 @@ struct spear_kbd {
 	unsigned short last_key;
 	unsigned short keycodes[NUM_ROWS * NUM_COLS];
 	bool rep;
+	unsigned int suspended_rate;
+	u32 mode_ctl_reg;
 };
 
 static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
@@ -72,10 +72,10 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
 	struct spear_kbd *kbd = dev_id;
 	struct input_dev *input = kbd->input;
 	unsigned int key;
-	u8 sts, val;
+	u32 sts, val;
 
-	sts = readb(kbd->io_base + STATUS_REG);
-	if (!(sts & DATA_AVAIL))
+	sts = readl_relaxed(kbd->io_base + STATUS_REG);
+	if (!(sts & STATUS_DATA_AVAIL))
 		return IRQ_NONE;
 
 	if (kbd->last_key != KEY_RESERVED) {
@@ -84,7 +84,8 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
 	}
 
 	/* following reads active (row, col) pair */
-	val = readb(kbd->io_base + DATA_REG);
+	val = readl_relaxed(kbd->io_base + DATA_REG) &
+		(DATA_ROW_MASK | DATA_COLUMN_MASK);
 	key = kbd->keycodes[val];
 
 	input_event(input, EV_MSC, MSC_SCAN, val);
@@ -94,7 +95,7 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
 	kbd->last_key = key;
 
 	/* clear interrupt */
-	writeb(0, kbd->io_base + STATUS_REG);
+	writel_relaxed(0, kbd->io_base + STATUS_REG);
 
 	return IRQ_HANDLED;
 }
@@ -103,7 +104,7 @@ static int spear_kbd_open(struct input_dev *dev)
 {
 	struct spear_kbd *kbd = input_get_drvdata(dev);
 	int error;
-	u16 val;
+	u32 val;
 
 	kbd->last_key = KEY_RESERVED;
 
@@ -111,16 +112,20 @@ static int spear_kbd_open(struct input_dev *dev)
 	if (error)
 		return error;
 
+	/* keyboard rate to be programmed is input clock (in MHz) - 1 */
+	val = clk_get_rate(kbd->clk) / 1000000 - 1;
+	val = (val & MODE_CTL_PCLK_FREQ_MSK) << MODE_CTL_PCLK_FREQ_SHIFT;
+
 	/* program keyboard */
-	val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK |
-		(kbd->mode << KEY_MATRIX_SHIFT);
-	writew(val, kbd->io_base + MODE_REG);
-	writeb(1, kbd->io_base + STATUS_REG);
+	val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | val |
+		(kbd->mode << MODE_CTL_KEYNUM_SHIFT);
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+	writel_relaxed(1, kbd->io_base + STATUS_REG);
 
 	/* start key scan */
-	val = readw(kbd->io_base + MODE_REG);
-	val |= START_SCAN;
-	writew(val, kbd->io_base + MODE_REG);
+	val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+	val |= MODE_CTL_START_SCAN;
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
 
 	return 0;
 }
@@ -128,12 +133,12 @@ static int spear_kbd_open(struct input_dev *dev)
 static void spear_kbd_close(struct input_dev *dev)
 {
 	struct spear_kbd *kbd = input_get_drvdata(dev);
-	u16 val;
+	u32 val;
 
 	/* stop key scan */
-	val = readw(kbd->io_base + MODE_REG);
-	val &= ~START_SCAN;
-	writew(val, kbd->io_base + MODE_REG);
+	val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+	val &= ~MODE_CTL_START_SCAN;
+	writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
 
 	clk_disable(kbd->clk);
 
@@ -146,7 +151,7 @@ static int __devinit spear_kbd_parse_dt(struct platform_device *pdev,
 {
 	struct device_node *np = pdev->dev.of_node;
 	int error;
-	u32 val;
+	u32 val, suspended_rate;
 
 	if (!np) {
 		dev_err(&pdev->dev, "Missing DT data\n");
@@ -156,6 +161,9 @@ static int __devinit spear_kbd_parse_dt(struct platform_device *pdev,
 	if (of_property_read_bool(np, "autorepeat"))
 		kbd->rep = true;
 
+	if (of_property_read_u32(np, "suspended_rate", &suspended_rate))
+		kbd->suspended_rate = suspended_rate;
+
 	error = of_property_read_u32(np, "st,mode", &val);
 	if (error) {
 		dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
@@ -213,6 +221,7 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
 	} else {
 		kbd->mode = pdata->mode;
 		kbd->rep = pdata->rep;
+		kbd->suspended_rate = pdata->suspended_rate;
 	}
 
 	kbd->res = request_mem_region(res->start, resource_size(res),
@@ -302,7 +311,7 @@ static int __devexit spear_kbd_remove(struct platform_device *pdev)
 	release_mem_region(kbd->res->start, resource_size(kbd->res));
 	kfree(kbd);
 
-	device_init_wakeup(&pdev->dev, 1);
+	device_init_wakeup(&pdev->dev, 0);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
@@ -314,15 +323,48 @@ static int spear_kbd_suspend(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct spear_kbd *kbd = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = kbd->input;
+	unsigned int rate = 0, mode_ctl_reg, val;
 
 	mutex_lock(&input_dev->mutex);
 
-	if (input_dev->users)
-		clk_enable(kbd->clk);
+	/* explicitly enable clock as we may program device */
+	clk_enable(kbd->clk);
 
-	if (device_may_wakeup(&pdev->dev))
+	mode_ctl_reg = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+
+	if (device_may_wakeup(&pdev->dev)) {
 		enable_irq_wake(kbd->irq);
 
+		/*
+		 * reprogram the keyboard operating frequency as on some
+		 * platform it may change during system suspended
+		 */
+		if (kbd->suspended_rate)
+			rate = kbd->suspended_rate / 1000000 - 1;
+		else
+			rate = clk_get_rate(kbd->clk) / 1000000 - 1;
+
+		val = mode_ctl_reg &
+			~(MODE_CTL_PCLK_FREQ_MSK << MODE_CTL_PCLK_FREQ_SHIFT);
+		val |= (rate & MODE_CTL_PCLK_FREQ_MSK)
+			<< MODE_CTL_PCLK_FREQ_SHIFT;
+		writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+	} else {
+		if (input_dev->users) {
+			writel_relaxed(mode_ctl_reg & ~MODE_CTL_START_SCAN,
+					kbd->io_base + MODE_CTL_REG);
+			clk_disable(kbd->clk);
+		}
+	}
+
+	/* store current configuration */
+	if (input_dev->users)
+		kbd->mode_ctl_reg = mode_ctl_reg;
+
+	/* restore previous clk state */
+	clk_disable(kbd->clk);
+
 	mutex_unlock(&input_dev->mutex);
 
 	return 0;
@@ -336,11 +378,16 @@ static int spear_kbd_resume(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(&pdev->dev)) {
 		disable_irq_wake(kbd->irq);
+	} else {
+		if (input_dev->users)
+			clk_enable(kbd->clk);
+	}
 
+	/* restore current configuration */
 	if (input_dev->users)
-		clk_enable(kbd->clk);
+		writel_relaxed(kbd->mode_ctl_reg, kbd->io_base + MODE_CTL_REG);
 
 	mutex_unlock(&input_dev->mutex);