Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander
  Input: tsc2007 - add X, Y and Z fuzz factors to platform data
  Input: tsc2007 - add poll_period parameter to platform data
  Input: tsc2007 - add poll_delay parameter to platform data
  Input: tsc2007 - add max_rt parameter to platform data
  Input: tsc2007 - debounce pressure measurement
  Input: ad714x - fix captouch wheel option algorithm
  Input: ad714x - allow platform code to specify irqflags
  Input: ad714x - fix threshold and completion interrupt masks
  Input: ad714x - fix up input configuration
  Input: elantech - remove support for proprietary X driver
  Input: elantech - report multitouch with proper ABS_MT messages
  Input: elantech - export pressure and width when supported
  Input: elantech - describe further the protocol
  Input: atmel_tsadcc - correct call to input_free_device
  Input: add driver FSL MPR121 capacitive touch sensor
  Input: remove useless synchronize_rcu() calls
  Input: ads7846 - fix gpio_pendown configuration
  Input: ads7846 - add possibility to use external vref on ads7846
  Input: rotary-encoder - add support for half-period encoders
  ...

9 files changed, 1206 insertions, 59 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b16bed038f7..69badb4e06a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -32,6 +32,16 @@ config KEYBOARD_ADP5588
 	  To compile this driver as a module, choose M here: the
 	  module will be called adp5588-keys.
 
+config KEYBOARD_ADP5589
+	tristate "ADP5589 I2C QWERTY Keypad and IO Expander"
+	depends on I2C
+	help
+	  Say Y here if you want to use a ADP5589 attached to your
+	  system I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adp5589-keys.
+
 config KEYBOARD_AMIGA
 	tristate "Amiga keyboard"
 	depends on AMIGA
@@ -325,6 +335,18 @@ config KEYBOARD_MCS
 	  To compile this driver as a module, choose M here: the
 	  module will be called mcs_touchkey.
 
+config KEYBOARD_MPR121
+	tristate "Freescale MPR121 Touchkey"
+	depends on I2C
+	help
+	  Say Y here if you have Freescale MPR121 touchkey controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mpr121_touchkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 878e6c20deb..c49cf8e04cd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -6,6 +6,7 @@
 
 obj-$(CONFIG_KEYBOARD_ADP5520)		+= adp5520-keys.o
 obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
+obj-$(CONFIG_KEYBOARD_ADP5589)		+= adp5589-keys.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
@@ -27,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
+obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
new file mode 100644
index 00000000000..631598663aa
--- /dev/null
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -0,0 +1,771 @@
+/*
+ * Description:  keypad driver for ADP5589
+ *		 I2C QWERTY Keypad and IO Expander
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2010-2011 Analog Devices Inc.
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/input/adp5589.h>
+
+/* GENERAL_CFG Register */
+#define OSC_EN		(1 << 7)
+#define CORE_CLK(x)	(((x) & 0x3) << 5)
+#define LCK_TRK_LOGIC	(1 << 4)
+#define LCK_TRK_GPI	(1 << 3)
+#define INT_CFG		(1 << 1)
+#define RST_CFG		(1 << 0)
+
+/* INT_EN Register */
+#define LOGIC2_IEN	(1 << 5)
+#define LOGIC1_IEN	(1 << 4)
+#define LOCK_IEN	(1 << 3)
+#define OVRFLOW_IEN	(1 << 2)
+#define GPI_IEN		(1 << 1)
+#define EVENT_IEN	(1 << 0)
+
+/* Interrupt Status Register */
+#define LOGIC2_INT	(1 << 5)
+#define LOGIC1_INT	(1 << 4)
+#define LOCK_INT	(1 << 3)
+#define OVRFLOW_INT	(1 << 2)
+#define GPI_INT		(1 << 1)
+#define EVENT_INT	(1 << 0)
+
+/* STATUS Register */
+
+#define LOGIC2_STAT	(1 << 7)
+#define LOGIC1_STAT	(1 << 6)
+#define LOCK_STAT	(1 << 5)
+#define KEC		0xF
+
+/* PIN_CONFIG_D Register */
+#define C4_EXTEND_CFG	(1 << 6)	/* RESET2 */
+#define R4_EXTEND_CFG	(1 << 5)	/* RESET1 */
+
+/* LOCK_CFG */
+#define LOCK_EN		(1 << 0)
+
+#define PTIME_MASK	0x3
+#define LTIME_MASK	0x3
+
+/* Key Event Register xy */
+#define KEY_EV_PRESSED		(1 << 7)
+#define KEY_EV_MASK		(0x7F)
+
+#define KEYP_MAX_EVENT		16
+
+#define MAXGPIO			19
+#define ADP_BANK(offs)		((offs) >> 3)
+#define ADP_BIT(offs)		(1u << ((offs) & 0x7))
+
+struct adp5589_kpad {
+	struct i2c_client *client;
+	struct input_dev *input;
+	unsigned short keycode[ADP5589_KEYMAPSIZE];
+	const struct adp5589_gpi_map *gpimap;
+	unsigned short gpimapsize;
+	unsigned extend_cfg;
+#ifdef CONFIG_GPIOLIB
+	unsigned char gpiomap[MAXGPIO];
+	bool export_gpio;
+	struct gpio_chip gc;
+	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
+	u8 dat_out[3];
+	u8 dir[3];
+#endif
+};
+
+static int adp5589_read(struct i2c_client *client, u8 reg)
+{
+	int ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "Read Error\n");
+
+	return ret;
+}
+
+static int adp5589_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+#ifdef CONFIG_GPIOLIB
+static int adp5589_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+
+	return !!(adp5589_read(kpad->client, ADP5589_GPI_STATUS_A + bank) &
+		  bit);
+}
+
+static void adp5589_gpio_set_value(struct gpio_chip *chip,
+				   unsigned off, int val)
+{
+	struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+
+	mutex_lock(&kpad->gpio_lock);
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank,
+		      kpad->dat_out[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+}
+
+static int adp5589_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] &= ~bit;
+	ret = adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank,
+			    kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int adp5589_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned off, int val)
+{
+	struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] |= bit;
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	ret = adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank,
+			    kpad->dat_out[bank]);
+	ret |= adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank,
+			     kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int __devinit adp5589_build_gpiomap(struct adp5589_kpad *kpad,
+				const struct adp5589_kpad_platform_data *pdata)
+{
+	bool pin_used[MAXGPIO];
+	int n_unused = 0;
+	int i;
+
+	memset(pin_used, false, sizeof(pin_used));
+
+	for (i = 0; i < MAXGPIO; i++)
+		if (pdata->keypad_en_mask & (1 << i))
+			pin_used[i] = true;
+
+	for (i = 0; i < kpad->gpimapsize; i++)
+		pin_used[kpad->gpimap[i].pin - ADP5589_GPI_PIN_BASE] = true;
+
+	if (kpad->extend_cfg & R4_EXTEND_CFG)
+		pin_used[4] = true;
+
+	if (kpad->extend_cfg & C4_EXTEND_CFG)
+		pin_used[12] = true;
+
+	for (i = 0; i < MAXGPIO; i++)
+		if (!pin_used[i])
+			kpad->gpiomap[n_unused++] = i;
+
+	return n_unused;
+}
+
+static int __devinit adp5589_gpio_add(struct adp5589_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5589_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int i, error;
+
+	if (!gpio_data)
+		return 0;
+
+	kpad->gc.ngpio = adp5589_build_gpiomap(kpad, pdata);
+	if (kpad->gc.ngpio == 0) {
+		dev_info(dev, "No unused gpios left to export\n");
+		return 0;
+	}
+
+	kpad->export_gpio = true;
+
+	kpad->gc.direction_input = adp5589_gpio_direction_input;
+	kpad->gc.direction_output = adp5589_gpio_direction_output;
+	kpad->gc.get = adp5589_gpio_get_value;
+	kpad->gc.set = adp5589_gpio_set_value;
+	kpad->gc.can_sleep = 1;
+
+	kpad->gc.base = gpio_data->gpio_start;
+	kpad->gc.label = kpad->client->name;
+	kpad->gc.owner = THIS_MODULE;
+
+	mutex_init(&kpad->gpio_lock);
+
+	error = gpiochip_add(&kpad->gc);
+	if (error) {
+		dev_err(dev, "gpiochip_add failed, err: %d\n", error);
+		return error;
+	}
+
+	for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+		kpad->dat_out[i] = adp5589_read(kpad->client,
+						ADP5589_GPO_DATA_OUT_A + i);
+		kpad->dir[i] = adp5589_read(kpad->client,
+					    ADP5589_GPIO_DIRECTION_A + i);
+	}
+
+	if (gpio_data->setup) {
+		error = gpio_data->setup(kpad->client,
+					 kpad->gc.base, kpad->gc.ngpio,
+					 gpio_data->context);
+		if (error)
+			dev_warn(dev, "setup failed, %d\n", error);
+	}
+
+	return 0;
+}
+
+static void __devexit adp5589_gpio_remove(struct adp5589_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5589_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int error;
+
+	if (!kpad->export_gpio)
+		return;
+
+	if (gpio_data->teardown) {
+		error = gpio_data->teardown(kpad->client,
+					    kpad->gc.base, kpad->gc.ngpio,
+					    gpio_data->context);
+		if (error)
+			dev_warn(dev, "teardown failed %d\n", error);
+	}
+
+	error = gpiochip_remove(&kpad->gc);
+	if (error)
+		dev_warn(dev, "gpiochip_remove failed %d\n", error);
+}
+#else
+static inline int adp5589_gpio_add(struct adp5589_kpad *kpad)
+{
+	return 0;
+}
+
+static inline void adp5589_gpio_remove(struct adp5589_kpad *kpad)
+{
+}
+#endif
+
+static void adp5589_report_switches(struct adp5589_kpad *kpad,
+				    int key, int key_val)
+{
+	int i;
+
+	for (i = 0; i < kpad->gpimapsize; i++) {
+		if (key_val == kpad->gpimap[i].pin) {
+			input_report_switch(kpad->input,
+					    kpad->gpimap[i].sw_evt,
+					    key & KEY_EV_PRESSED);
+			break;
+		}
+	}
+}
+
+static void adp5589_report_events(struct adp5589_kpad *kpad, int ev_cnt)
+{
+	int i;
+
+	for (i = 0; i < ev_cnt; i++) {
+		int key = adp5589_read(kpad->client, ADP5589_FIFO_1 + i);
+		int key_val = key & KEY_EV_MASK;
+
+		if (key_val >= ADP5589_GPI_PIN_BASE &&
+		    key_val <= ADP5589_GPI_PIN_END) {
+			adp5589_report_switches(kpad, key, key_val);
+		} else {
+			input_report_key(kpad->input,
+					 kpad->keycode[key_val - 1],
+					 key & KEY_EV_PRESSED);
+		}
+	}
+}
+
+static irqreturn_t adp5589_irq(int irq, void *handle)
+{
+	struct adp5589_kpad *kpad = handle;
+	struct i2c_client *client = kpad->client;
+	int status, ev_cnt;
+
+	status = adp5589_read(client, ADP5589_INT_STATUS);
+
+	if (status & OVRFLOW_INT)	/* Unlikely and should never happen */
+		dev_err(&client->dev, "Event Overflow Error\n");
+
+	if (status & EVENT_INT) {
+		ev_cnt = adp5589_read(client, ADP5589_STATUS) & KEC;
+		if (ev_cnt) {
+			adp5589_report_events(kpad, ev_cnt);
+			input_sync(kpad->input);
+		}
+	}
+
+	adp5589_write(client, ADP5589_INT_STATUS, status);	/* Status is W1C */
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad, unsigned short key)
+{
+	int i;
+
+	for (i = 0; i < ADP5589_KEYMAPSIZE; i++)
+		if (key == kpad->keycode[i])
+			return (i + 1) | KEY_EV_PRESSED;
+
+	dev_err(&kpad->client->dev, "RESET/UNLOCK key not in keycode map\n");
+
+	return -EINVAL;
+}
+
+static int __devinit adp5589_setup(struct adp5589_kpad *kpad)
+{
+	struct i2c_client *client = kpad->client;
+	const struct adp5589_kpad_platform_data *pdata =
+	    client->dev.platform_data;
+	int i, ret;
+	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
+	unsigned char pull_mask = 0;
+
+	ret = adp5589_write(client, ADP5589_PIN_CONFIG_A,
+			    pdata->keypad_en_mask & 0xFF);
+	ret |= adp5589_write(client, ADP5589_PIN_CONFIG_B,
+			     (pdata->keypad_en_mask >> 8) & 0xFF);
+	ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C,
+			     (pdata->keypad_en_mask >> 16) & 0xFF);
+
+	if (pdata->en_keylock) {
+		ret |= adp5589_write(client, ADP5589_UNLOCK1,
+				     pdata->unlock_key1);
+		ret |= adp5589_write(client, ADP5589_UNLOCK2,
+				     pdata->unlock_key2);
+		ret |= adp5589_write(client, ADP5589_UNLOCK_TIMERS,
+				     pdata->unlock_timer & LTIME_MASK);
+		ret |= adp5589_write(client, ADP5589_LOCK_CFG, LOCK_EN);
+	}
+
+	for (i = 0; i < KEYP_MAX_EVENT; i++)
+		ret |= adp5589_read(client, ADP5589_FIFO_1 + i);
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin <= ADP5589_GPI_PIN_ROW_END) {
+			evt_mode1 |= (1 << (pin - ADP5589_GPI_PIN_ROW_BASE));
+		} else {
+			evt_mode2 |=
+			    ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) & 0xFF);
+			evt_mode3 |=
+			    ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) >> 8);
+		}
+	}
+
+	if (pdata->gpimapsize) {
+		ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_A, evt_mode1);
+		ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_B, evt_mode2);
+		ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_C, evt_mode3);
+	}
+
+	if (pdata->pull_dis_mask & pdata->pullup_en_100k &
+	    pdata->pullup_en_300k & pdata->pulldown_en_300k)
+		dev_warn(&client->dev, "Conflicting pull resistor config\n");
+
+	for (i = 0; i < MAXGPIO; i++) {
+		unsigned val = 0;
+
+		if (pdata->pullup_en_300k & (1 << i))
+			val = 0;
+		else if (pdata->pulldown_en_300k & (1 << i))
+			val = 1;
+		else if (pdata->pullup_en_100k & (1 << i))
+			val = 2;
+		else if (pdata->pull_dis_mask & (1 << i))
+			val = 3;
+
+		pull_mask |= val << (2 * (i & 0x3));
+
+		if ((i & 0x3) == 0x3 || i == MAXGPIO - 1) {
+			ret |= adp5589_write(client,
+					     ADP5589_RPULL_CONFIG_A + (i >> 2),
+					     pull_mask);
+			pull_mask = 0;
+		}
+	}
+
+	if (pdata->reset1_key_1 && pdata->reset1_key_2 && pdata->reset1_key_3) {
+		ret |= adp5589_write(client, ADP5589_RESET1_EVENT_A,
+				     adp5589_get_evcode(kpad,
+							pdata->reset1_key_1));
+		ret |= adp5589_write(client, ADP5589_RESET1_EVENT_B,
+				     adp5589_get_evcode(kpad,
+							pdata->reset1_key_2));
+		ret |= adp5589_write(client, ADP5589_RESET1_EVENT_C,
+				     adp5589_get_evcode(kpad,
+							pdata->reset1_key_3));
+		kpad->extend_cfg |= R4_EXTEND_CFG;
+	}
+
+	if (pdata->reset2_key_1 && pdata->reset2_key_2) {
+		ret |= adp5589_write(client, ADP5589_RESET2_EVENT_A,
+				     adp5589_get_evcode(kpad,
+							pdata->reset2_key_1));
+		ret |= adp5589_write(client, ADP5589_RESET2_EVENT_B,
+				     adp5589_get_evcode(kpad,
+							pdata->reset2_key_2));
+		kpad->extend_cfg |= C4_EXTEND_CFG;
+	}
+
+	if (kpad->extend_cfg) {
+		ret |= adp5589_write(client, ADP5589_RESET_CFG,
+				     pdata->reset_cfg);
+		ret |= adp5589_write(client, ADP5589_PIN_CONFIG_D,
+				     kpad->extend_cfg);
+	}
+
+	for (i = 0; i <= ADP_BANK(MAXGPIO); i++)
+		ret |= adp5589_write(client, ADP5589_DEBOUNCE_DIS_A + i,
+				     pdata->debounce_dis_mask >> (i * 8));
+
+	ret |= adp5589_write(client, ADP5589_POLL_PTIME_CFG,
+			     pdata->scan_cycle_time & PTIME_MASK);
+	ret |= adp5589_write(client, ADP5589_INT_STATUS, LOGIC2_INT |
+			     LOGIC1_INT | OVRFLOW_INT | LOCK_INT |
+			     GPI_INT | EVENT_INT);	/* Status is W1C */
+
+	ret |= adp5589_write(client, ADP5589_GENERAL_CFG,
+			     INT_CFG | OSC_EN | CORE_CLK(3));
+	ret |= adp5589_write(client, ADP5589_INT_EN,
+			     OVRFLOW_IEN | GPI_IEN | EVENT_IEN);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "Write Error\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __devinit adp5589_report_switch_state(struct adp5589_kpad *kpad)
+{
+	int gpi_stat1 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_A);
+	int gpi_stat2 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_B);
+	int gpi_stat3 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_C);
+	int gpi_stat_tmp, pin_loc;
+	int i;
+
+	for (i = 0; i < kpad->gpimapsize; i++) {
+		unsigned short pin = kpad->gpimap[i].pin;
+
+		if (pin <= ADP5589_GPI_PIN_ROW_END) {
+			gpi_stat_tmp = gpi_stat1;
+			pin_loc = pin - ADP5589_GPI_PIN_ROW_BASE;
+		} else if ((pin - ADP5589_GPI_PIN_COL_BASE) < 8) {
+			gpi_stat_tmp = gpi_stat2;
+			pin_loc = pin - ADP5589_GPI_PIN_COL_BASE;
+		} else {
+			gpi_stat_tmp = gpi_stat3;
+			pin_loc = pin - ADP5589_GPI_PIN_COL_BASE - 8;
+		}
+
+		if (gpi_stat_tmp < 0) {
+			dev_err(&kpad->client->dev,
+				"Can't read GPIO_DAT_STAT switch"
+				" %d default to OFF\n", pin);
+			gpi_stat_tmp = 0;
+		}
+
+		input_report_switch(kpad->input,
+				    kpad->gpimap[i].sw_evt,
+				    !(gpi_stat_tmp & (1 << pin_loc)));
+	}
+
+	input_sync(kpad->input);
+}
+
+static int __devinit adp5589_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct adp5589_kpad *kpad;
+	const struct adp5589_kpad_platform_data *pdata;
+	struct input_dev *input;
+	unsigned int revid;
+	int ret, i;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data?\n");
+		return -EINVAL;
+	}
+
+	if (!((pdata->keypad_en_mask & 0xFF) &&
+			(pdata->keypad_en_mask >> 8)) || !pdata->keymap) {
+		dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->keymapsize != ADP5589_KEYMAPSIZE) {
+		dev_err(&client->dev, "invalid keymapsize\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->gpimap && pdata->gpimapsize) {
+		dev_err(&client->dev, "invalid gpimap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->gpimapsize > ADP5589_GPIMAPSIZE_MAX) {
+		dev_err(&client->dev, "invalid gpimapsize\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin < ADP5589_GPI_PIN_BASE || pin > ADP5589_GPI_PIN_END) {
+			dev_err(&client->dev, "invalid gpi pin data\n");
+			return -EINVAL;
+		}
+
+		if ((1 << (pin - ADP5589_GPI_PIN_ROW_BASE)) &
+				pdata->keypad_en_mask) {
+			dev_err(&client->dev, "invalid gpi row/col data\n");
+			return -EINVAL;
+		}
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+	kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!kpad || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kpad->client = client;
+	kpad->input = input;
+
+	ret = adp5589_read(client, ADP5589_ID);
+	if (ret < 0) {
+		error = ret;
+		goto err_free_mem;
+	}
+
+	revid = (u8) ret & ADP5589_DEVICE_ID_MASK;
+
+	input->name = client->name;
+	input->phys = "adp5589-keys/input0";
+	input->dev.parent = &client->dev;
+
+	input_set_drvdata(input, kpad);
+
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = revid;
+
+	input->keycodesize = sizeof(kpad->keycode[0]);
+	input->keycodemax = pdata->keymapsize;
+	input->keycode = kpad->keycode;
+
+	memcpy(kpad->keycode, pdata->keymap,
+	       pdata->keymapsize * input->keycodesize);
+
+	kpad->gpimap = pdata->gpimap;
+	kpad->gpimapsize = pdata->gpimapsize;
+
+	/* setup input device */
+	__set_bit(EV_KEY, input->evbit);
+
+	if (pdata->repeat)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < input->keycodemax; i++)
+		__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	if (kpad->gpimapsize)
+		__set_bit(EV_SW, input->evbit);
+	for (i = 0; i < kpad->gpimapsize; i++)
+		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&client->dev, "unable to register input device\n");
+		goto err_free_mem;
+	}
+
+	error = request_threaded_irq(client->irq, NULL, adp5589_irq,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				     client->dev.driver->name, kpad);
+	if (error) {
+		dev_err(&client->dev, "irq %d busy?\n", client->irq);
+		goto err_unreg_dev;
+	}
+
+	error = adp5589_setup(kpad);
+	if (error)
+		goto err_free_irq;
+
+	if (kpad->gpimapsize)
+		adp5589_report_switch_state(kpad);
+
+	error = adp5589_gpio_add(kpad);
+	if (error)
+		goto err_free_irq;
+
+	device_init_wakeup(&client->dev, 1);
+	i2c_set_clientdata(client, kpad);
+
+	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, kpad);
+err_unreg_dev:
+	input_unregister_device(input);
+	input = NULL;
+err_free_mem:
+	input_free_device(input);
+	kfree(kpad);
+
+	return error;
+}
+
+static int __devexit adp5589_remove(struct i2c_client *client)
+{
+	struct adp5589_kpad *kpad = i2c_get_clientdata(client);
+
+	adp5589_write(client, ADP5589_GENERAL_CFG, 0);
+	free_irq(client->irq, kpad);
+	input_unregister_device(kpad->input);
+	adp5589_gpio_remove(kpad);
+	kfree(kpad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int adp5589_suspend(struct device *dev)
+{
+	struct adp5589_kpad *kpad = dev_get_drvdata(dev);
+	struct i2c_client *client = kpad->client;
+
+	disable_irq(client->irq);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int adp5589_resume(struct device *dev)
+{
+	struct adp5589_kpad *kpad = dev_get_drvdata(dev);
+	struct i2c_client *client = kpad->client;
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(adp5589_dev_pm_ops, adp5589_suspend, adp5589_resume);
+
+static const struct i2c_device_id adp5589_id[] = {
+	{"adp5589-keys", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, adp5589_id);
+
+static struct i2c_driver adp5589_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.owner = THIS_MODULE,
+		.pm = &adp5589_dev_pm_ops,
+	},
+	.probe = adp5589_probe,
+	.remove = __devexit_p(adp5589_remove),
+	.id_table = adp5589_id,
+};
+
+static int __init adp5589_init(void)
+{
+	return i2c_add_driver(&adp5589_driver);
+}
+module_init(adp5589_init);
+
+static void __exit adp5589_exit(void)
+{
+	i2c_del_driver(&adp5589_driver);
+}
+module_exit(adp5589_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5589 Keypad driver");
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index eb3006361ee..6e6145b9a4c 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -324,7 +324,12 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata)
 	unsigned int type = button->type ?: EV_KEY;
 	int state = (gpio_get_value_cansleep(button->gpio) ? 1 : 0) ^ button->active_low;
 
-	input_event(input, type, button->code, !!state);
+	if (type == EV_ABS) {
+		if (state)
+			input_event(input, type, button->code, button->value);
+	} else {
+		input_event(input, type, button->code, !!state);
+	}
 	input_sync(input);
 }
 
@@ -363,7 +368,7 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 					 struct gpio_button_data *bdata,
 					 struct gpio_keys_button *button)
 {
-	char *desc = button->desc ? button->desc : "gpio_keys";
+	const char *desc = button->desc ? button->desc : "gpio_keys";
 	struct device *dev = &pdev->dev;
 	unsigned long irqflags;
 	int irq, error;
@@ -468,7 +473,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, ddata);
 	input_set_drvdata(input, ddata);
 
-	input->name = pdev->name;
+	input->name = pdata->name ? : pdev->name;
 	input->phys = "gpio-keys/input0";
 	input->dev.parent = &pdev->dev;
 	input->open = gpio_keys_open;
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
new file mode 100644
index 00000000000..0a9e8119488
--- /dev/null
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -0,0 +1,339 @@
+/*
+ * Touchkey driver for Freescale MPR121 Controllor
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Zhang Jiejing <jiejing.zhang@freescale.com>
+ *
+ * Based on mcs_touchkey.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/i2c/mpr121_touchkey.h>
+
+/* Register definitions */
+#define ELE_TOUCH_STATUS_0_ADDR	0x0
+#define ELE_TOUCH_STATUS_1_ADDR	0X1
+#define MHD_RISING_ADDR		0x2b
+#define NHD_RISING_ADDR		0x2c
+#define NCL_RISING_ADDR		0x2d
+#define FDL_RISING_ADDR		0x2e
+#define MHD_FALLING_ADDR	0x2f
+#define NHD_FALLING_ADDR	0x30
+#define NCL_FALLING_ADDR	0x31
+#define FDL_FALLING_ADDR	0x32
+#define ELE0_TOUCH_THRESHOLD_ADDR	0x41
+#define ELE0_RELEASE_THRESHOLD_ADDR	0x42
+#define AFE_CONF_ADDR			0x5c
+#define FILTER_CONF_ADDR		0x5d
+
+/*
+ * ELECTRODE_CONF_ADDR: This register configures the number of
+ * enabled capacitance sensing inputs and its run/suspend mode.
+ */
+#define ELECTRODE_CONF_ADDR		0x5e
+#define AUTO_CONFIG_CTRL_ADDR		0x7b
+#define AUTO_CONFIG_USL_ADDR		0x7d
+#define AUTO_CONFIG_LSL_ADDR		0x7e
+#define AUTO_CONFIG_TL_ADDR		0x7f
+
+/* Threshold of touch/release trigger */
+#define TOUCH_THRESHOLD			0x0f
+#define RELEASE_THRESHOLD		0x0a
+/* Masks for touch and release triggers */
+#define TOUCH_STATUS_MASK		0xfff
+/* MPR121 has 12 keys */
+#define MPR121_MAX_KEY_COUNT		12
+
+struct mpr121_touchkey {
+	struct i2c_client	*client;
+	struct input_dev	*input_dev;
+	unsigned int		key_val;
+	unsigned int		statusbits;
+	unsigned int		keycount;
+	u16			keycodes[MPR121_MAX_KEY_COUNT];
+};
+
+struct mpr121_init_register {
+	int addr;
+	u8 val;
+};
+
+static const struct mpr121_init_register init_reg_table[] __devinitconst = {
+	{ MHD_RISING_ADDR,	0x1 },
+	{ NHD_RISING_ADDR,	0x1 },
+	{ MHD_FALLING_ADDR,	0x1 },
+	{ NHD_FALLING_ADDR,	0x1 },
+	{ NCL_FALLING_ADDR,	0xff },
+	{ FDL_FALLING_ADDR,	0x02 },
+	{ FILTER_CONF_ADDR,	0x04 },
+	{ AFE_CONF_ADDR,	0x0b },
+	{ AUTO_CONFIG_CTRL_ADDR, 0x0b },
+};
+
+static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
+{
+	struct mpr121_touchkey *mpr121 = dev_id;
+	struct i2c_client *client = mpr121->client;
+	struct input_dev *input = mpr121->input_dev;
+	unsigned int key_num, key_val, pressed;
+	int reg;
+
+	reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
+	if (reg < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", reg);
+		goto out;
+	}
+
+	reg <<= 8;
+	reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR);
+	if (reg < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", reg);
+		goto out;
+	}
+
+	reg &= TOUCH_STATUS_MASK;
+	/* use old press bit to figure out which bit changed */
+	key_num = ffs(reg ^ mpr121->statusbits) - 1;
+	pressed = reg & (1 << key_num);
+	mpr121->statusbits = reg;
+
+	key_val = mpr121->keycodes[key_num];
+
+	input_event(input, EV_MSC, MSC_SCAN, key_num);
+	input_report_key(input, key_val, pressed);
+	input_sync(input);
+
+	dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
+		pressed ? "pressed" : "released");
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int __devinit mpr121_phys_init(const struct mpr121_platform_data *pdata,
+				      struct mpr121_touchkey *mpr121,
+				      struct i2c_client *client)
+{
+	const struct mpr121_init_register *reg;
+	unsigned char usl, lsl, tl;
+	int i, t, vdd, ret;
+
+	/* Set up touch/release threshold for ele0-ele11 */
+	for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) {
+		t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2);
+		ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD);
+		if (ret < 0)
+			goto err_i2c_write;
+		ret = i2c_smbus_write_byte_data(client, t + 1,
+						RELEASE_THRESHOLD);
+		if (ret < 0)
+			goto err_i2c_write;
+	}
+
+	/* Set up init register */
+	for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) {
+		reg = &init_reg_table[i];
+		ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val);
+		if (ret < 0)
+			goto err_i2c_write;
+	}
+
+
+	/*
+	 * Capacitance on sensing input varies and needs to be compensated.
+	 * The internal MPR121-auto-configuration can do this if it's
+	 * registers are set properly (based on pdata->vdd_uv).
+	 */
+	vdd = pdata->vdd_uv / 1000;