IB/ipath: Remove support for QLogic PCIe QLE devices

The ib_qib driver is taking over support for QLogic PCIe QLE devices,
so remove support for them from ib_ipath.  The ib_ipath driver now
supports only the obsolete QLogic Hyper-Transport IB host channel
adapter (model QHT7140).

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

9 files changed, 7 insertions, 7131 deletions

diff --git a/drivers/infiniband/hw/ipath/Kconfig b/drivers/infiniband/hw/ipath/Kconfig
index 3c7968f25ec..1d9bb115cbf 100644
--- a/drivers/infiniband/hw/ipath/Kconfig
+++ b/drivers/infiniband/hw/ipath/Kconfig
@@ -1,9 +1,11 @@
 config INFINIBAND_IPATH
-	tristate "QLogic InfiniPath Driver"
-	depends on 64BIT && NET
+	tristate "QLogic HTX HCA support"
+	depends on 64BIT && NET && HT_IRQ
 	---help---
-	This is a driver for QLogic InfiniPath host channel adapters,
+	This is a driver for the obsolete QLogic Hyper-Transport
+	IB host channel adapter (model QHT7140),
 	including InfiniBand verbs support.  This driver allows these
 	devices to be used with both kernel upper level protocols such
 	as IP-over-InfiniBand as well as with userspace applications
 	(in conjunction with InfiniBand userspace access).
+	For QLogic PCIe QLE based cards, use the QIB driver instead.
diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile
index bf945006198..fa3df82681d 100644
--- a/drivers/infiniband/hw/ipath/Makefile
+++ b/drivers/infiniband/hw/ipath/Makefile
@@ -29,13 +29,9 @@ ib_ipath-y := \
 	ipath_user_pages.o \
 	ipath_user_sdma.o \
 	ipath_verbs_mcast.o \
-	ipath_verbs.o \
-	ipath_iba7220.o \
-	ipath_sd7220.o \
-	ipath_sd7220_img.o
+	ipath_verbs.o
 
 ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
-ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o
 
 ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
 ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
diff --git a/drivers/infiniband/hw/ipath/ipath_7220.h b/drivers/infiniband/hw/ipath/ipath_7220.h
deleted file mode 100644
index 74fa5cc5131..00000000000
--- a/drivers/infiniband/hw/ipath/ipath_7220.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _IPATH_7220_H
-#define _IPATH_7220_H
-/*
- * Copyright (c) 2007 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This header file provides the declarations and common definitions
- * for (mostly) manipulation of the SerDes blocks within the IBA7220.
- * the functions declared should only be called from within other
- * 7220-related files such as ipath_iba7220.c or ipath_sd7220.c.
- */
-int ipath_sd7220_presets(struct ipath_devdata *dd);
-int ipath_sd7220_init(struct ipath_devdata *dd, int was_reset);
-int ipath_sd7220_prog_ld(struct ipath_devdata *dd, int sdnum, u8 *img,
-	int len, int offset);
-int ipath_sd7220_prog_vfy(struct ipath_devdata *dd, int sdnum, const u8 *img,
-	int len, int offset);
-/*
- * Below used for sdnum parameter, selecting one of the two sections
- * used for PCIe, or the single SerDes used for IB, which is the
- * only one currently used
- */
-#define IB_7220_SERDES 2
-
-int ipath_sd7220_ib_load(struct ipath_devdata *dd);
-int ipath_sd7220_ib_vfy(struct ipath_devdata *dd);
-
-#endif /* _IPATH_7220_H */
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 6302626d17f..21337468c65 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -132,18 +132,13 @@ static int __devinit ipath_init_one(struct pci_dev *,
 
 /* Only needed for registration, nothing else needs this info */
 #define PCI_VENDOR_ID_PATHSCALE 0x1fc1
-#define PCI_VENDOR_ID_QLOGIC 0x1077
 #define PCI_DEVICE_ID_INFINIPATH_HT 0xd
-#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
-#define PCI_DEVICE_ID_INFINIPATH_7220 0x7220
 
 /* Number of seconds before our card status check...  */
 #define STATUS_TIMEOUT 60
 
 static const struct pci_device_id ipath_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_INFINIPATH_7220) },
 	{ 0, }
 };
 
@@ -521,30 +516,9 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	/* setup the chip-specific functions, as early as possible. */
 	switch (ent->device) {
 	case PCI_DEVICE_ID_INFINIPATH_HT:
-#ifdef CONFIG_HT_IRQ
 		ipath_init_iba6110_funcs(dd);
 		break;
-#else
-		ipath_dev_err(dd, "QLogic HT device 0x%x cannot work if "
-			      "CONFIG_HT_IRQ is not enabled\n", ent->device);
-		return -ENODEV;
-#endif
-	case PCI_DEVICE_ID_INFINIPATH_PE800:
-#ifdef CONFIG_PCI_MSI
-		ipath_init_iba6120_funcs(dd);
-		break;
-#else
-		ipath_dev_err(dd, "QLogic PCIE device 0x%x cannot work if "
-			      "CONFIG_PCI_MSI is not enabled\n", ent->device);
-		return -ENODEV;
-#endif
-	case PCI_DEVICE_ID_INFINIPATH_7220:
-#ifndef CONFIG_PCI_MSI
-		ipath_dbg("CONFIG_PCI_MSI is not enabled, "
-			  "using INTx for unit %u\n", dd->ipath_unit);
-#endif
-		ipath_init_iba7220_funcs(dd);
-		break;
+
 	default:
 		ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
 			      "failing\n", ent->device);
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
deleted file mode 100644
index 4b4a30b0dab..00000000000
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ /dev/null
@@ -1,1862 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-/*
- * This file contains all of the code that is specific to the
- * InfiniPath PCIe chip.
- */
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_kernel.h"
-#include "ipath_registers.h"
-
-static void ipath_setup_pe_setextled(struct ipath_devdata *, u64, u64);
-
-/*
- * This file contains all the chip-specific register information and
- * access functions for the QLogic InfiniPath PCI-Express chip.
- *
- * This lists the InfiniPath registers, in the actual chip layout.
- * This structure should never be directly accessed.
- */
-struct _infinipath_do_not_use_kernel_regs {
-	unsigned long long Revision;
-	unsigned long long Control;
-	unsigned long long PageAlign;
-	unsigned long long PortCnt;
-	unsigned long long DebugPortSelect;
-	unsigned long long Reserved0;
-	unsigned long long SendRegBase;
-	unsigned long long UserRegBase;
-	unsigned long long CounterRegBase;
-	unsigned long long Scratch;
-	unsigned long long Reserved1;
-	unsigned long long Reserved2;
-	unsigned long long IntBlocked;
-	unsigned long long IntMask;
-	unsigned long long IntStatus;
-	unsigned long long IntClear;
-	unsigned long long ErrorMask;
-	unsigned long long ErrorStatus;
-	unsigned long long ErrorClear;
-	unsigned long long HwErrMask;
-	unsigned long long HwErrStatus;
-	unsigned long long HwErrClear;
-	unsigned long long HwDiagCtrl;
-	unsigned long long MDIO;
-	unsigned long long IBCStatus;
-	unsigned long long IBCCtrl;
-	unsigned long long ExtStatus;
-	unsigned long long ExtCtrl;
-	unsigned long long GPIOOut;
-	unsigned long long GPIOMask;
-	unsigned long long GPIOStatus;
-	unsigned long long GPIOClear;
-	unsigned long long RcvCtrl;
-	unsigned long long RcvBTHQP;
-	unsigned long long RcvHdrSize;
-	unsigned long long RcvHdrCnt;
-	unsigned long long RcvHdrEntSize;
-	unsigned long long RcvTIDBase;
-	unsigned long long RcvTIDCnt;
-	unsigned long long RcvEgrBase;
-	unsigned long long RcvEgrCnt;
-	unsigned long long RcvBufBase;
-	unsigned long long RcvBufSize;
-	unsigned long long RxIntMemBase;
-	unsigned long long RxIntMemSize;
-	unsigned long long RcvPartitionKey;
-	unsigned long long Reserved3;
-	unsigned long long RcvPktLEDCnt;
-	unsigned long long Reserved4[8];
-	unsigned long long SendCtrl;
-	unsigned long long SendPIOBufBase;
-	unsigned long long SendPIOSize;
-	unsigned long long SendPIOBufCnt;
-	unsigned long long SendPIOAvailAddr;
-	unsigned long long TxIntMemBase;
-	unsigned long long TxIntMemSize;
-	unsigned long long Reserved5;
-	unsigned long long PCIeRBufTestReg0;
-	unsigned long long PCIeRBufTestReg1;
-	unsigned long long Reserved51[6];
-	unsigned long long SendBufferError;
-	unsigned long long SendBufferErrorCONT1;
-	unsigned long long Reserved6SBE[6];
-	unsigned long long RcvHdrAddr0;
-	unsigned long long RcvHdrAddr1;
-	unsigned long long RcvHdrAddr2;
-	unsigned long long RcvHdrAddr3;
-	unsigned long long RcvHdrAddr4;
-	unsigned long long Reserved7RHA[11];
-	unsigned long long RcvHdrTailAddr0;
-	unsigned long long RcvHdrTailAddr1;
-	unsigned long long RcvHdrTailAddr2;
-	unsigned long long RcvHdrTailAddr3;
-	unsigned long long RcvHdrTailAddr4;
-	unsigned long long Reserved8RHTA[11];
-	unsigned long long Reserved9SW[8];
-	unsigned long long SerdesConfig0;
-	unsigned long long SerdesConfig1;
-	unsigned long long SerdesStatus;
-	unsigned long long XGXSConfig;
-	unsigned long long IBPLLCfg;
-	unsigned long long Reserved10SW2[3];
-	unsigned long long PCIEQ0SerdesConfig0;
-	unsigned long long PCIEQ0SerdesConfig1;
-	unsigned long long PCIEQ0SerdesStatus;
-	unsigned long long Reserved11;
-	unsigned long long PCIEQ1SerdesConfig0;
-	unsigned long long PCIEQ1SerdesConfig1;
-	unsigned long long PCIEQ1SerdesStatus;
-	unsigned long long Reserved12;
-};
-
-struct _infinipath_do_not_use_counters {
-	__u64 LBIntCnt;
-	__u64 LBFlowStallCnt;
-	__u64 Reserved1;
-	__u64 TxUnsupVLErrCnt;
-	__u64 TxDataPktCnt;
-	__u64 TxFlowPktCnt;
-	__u64 TxDwordCnt;
-	__u64 TxLenErrCnt;
-	__u64 TxMaxMinLenErrCnt;
-	__u64 TxUnderrunCnt;
-	__u64 TxFlowStallCnt;
-	__u64 TxDroppedPktCnt;
-	__u64 RxDroppedPktCnt;
-	__u64 RxDataPktCnt;
-	__u64 RxFlowPktCnt;
-	__u64 RxDwordCnt;
-	__u64 RxLenErrCnt;
-	__u64 RxMaxMinLenErrCnt;
-	__u64 RxICRCErrCnt;
-	__u64 RxVCRCErrCnt;
-	__u64 RxFlowCtrlErrCnt;
-	__u64 RxBadFormatCnt;
-	__u64 RxLinkProblemCnt;
-	__u64 RxEBPCnt;
-	__u64 RxLPCRCErrCnt;
-	__u64 RxBufOvflCnt;
-	__u64 RxTIDFullErrCnt;
-	__u64 RxTIDValidErrCnt;
-	__u64 RxPKeyMismatchCnt;
-	__u64 RxP0HdrEgrOvflCnt;
-	__u64 RxP1HdrEgrOvflCnt;
-	__u64 RxP2HdrEgrOvflCnt;
-	__u64 RxP3HdrEgrOvflCnt;
-	__u64 RxP4HdrEgrOvflCnt;
-	__u64 RxP5HdrEgrOvflCnt;
-	__u64 RxP6HdrEgrOvflCnt;
-	__u64 RxP7HdrEgrOvflCnt;
-	__u64 RxP8HdrEgrOvflCnt;
-	__u64 Reserved6;
-	__u64 Reserved7;
-	__u64 IBStatusChangeCnt;
-	__u64 IBLinkErrRecoveryCnt;
-	__u64 IBLinkDownedCnt;
-	__u64 IBSymbolErrCnt;
-};
-
-#define IPATH_KREG_OFFSET(field) (offsetof( \
-	struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
-#define IPATH_CREG_OFFSET(field) (offsetof( \
-	struct _infinipath_do_not_use_counters, field) / sizeof(u64))
-
-static const struct ipath_kregs ipath_pe_kregs = {
-	.kr_control = IPATH_KREG_OFFSET(Control),
-	.kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
-	.kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
-	.kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
-	.kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
-	.kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
-	.kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
-	.kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
-	.kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
-	.kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
-	.kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
-	.kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
-	.kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
-	.kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
-	.kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
-	.kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
-	.kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
-	.kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
-	.kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
-	.kr_intclear = IPATH_KREG_OFFSET(IntClear),
-	.kr_intmask = IPATH_KREG_OFFSET(IntMask),
-	.kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
-	.kr_mdio = IPATH_KREG_OFFSET(MDIO),
-	.kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
-	.kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
-	.kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
-	.kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
-	.kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
-	.kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
-	.kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
-	.kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
-	.kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
-	.kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
-	.kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
-	.kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
-	.kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
-	.kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
-	.kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
-	.kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
-	.kr_revision = IPATH_KREG_OFFSET(Revision),
-	.kr_scratch = IPATH_KREG_OFFSET(Scratch),
-	.kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
-	.kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
-	.kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr),
-	.kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase),
-	.kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt),
-	.kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize),
-	.kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
-	.kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
-	.kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
-	.kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
-	.kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0),
-	.kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1),
-	.kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus),
-	.kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
-	.kr_ibpllcfg = IPATH_KREG_OFFSET(IBPLLCfg),
-
-	/*
-	 * These should not be used directly via ipath_write_kreg64(),
-	 * use them with ipath_write_kreg64_port(),
-	 */
-	.kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
-	.kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0),
-
-	/* The rcvpktled register controls one of the debug port signals, so
-	 * a packet activity LED can be connected to it. */
-	.kr_rcvpktledcnt = IPATH_KREG_OFFSET(RcvPktLEDCnt),
-	.kr_pcierbuftestreg0 = IPATH_KREG_OFFSET(PCIeRBufTestReg0),
-	.kr_pcierbuftestreg1 = IPATH_KREG_OFFSET(PCIeRBufTestReg1),
-	.kr_pcieq0serdesconfig0 = IPATH_KREG_OFFSET(PCIEQ0SerdesConfig0),
-	.kr_pcieq0serdesconfig1 = IPATH_KREG_OFFSET(PCIEQ0SerdesConfig1),
-	.kr_pcieq0serdesstatus = IPATH_KREG_OFFSET(PCIEQ0SerdesStatus),
-	.kr_pcieq1serdesconfig0 = IPATH_KREG_OFFSET(PCIEQ1SerdesConfig0),
-	.kr_pcieq1serdesconfig1 = IPATH_KREG_OFFSET(PCIEQ1SerdesConfig1),
-	.kr_pcieq1serdesstatus = IPATH_KREG_OFFSET(PCIEQ1SerdesStatus)
-};
-
-static const struct ipath_cregs ipath_pe_cregs = {
-	.cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
-	.cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
-	.cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
-	.cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
-	.cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
-	.cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
-	.cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
-	.cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
-	.cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
-	.cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
-	.cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
-	.cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
-	.cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
-	.cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
-	.cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
-	.cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
-	.cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
-	.cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
-	.cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
-	.cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
-	.cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
-	.cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
-	.cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
-	.cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
-	.cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
-	.cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
-	.cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
-	.cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
-	.cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
-	.cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
-	.cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
-	.cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
-	.cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
-};
-
-/* kr_control bits */
-#define INFINIPATH_C_RESET 1U
-
-/* kr_intstatus, kr_intclear, kr_intmask bits */
-#define INFINIPATH_I_RCVURG_MASK ((1U<<5)-1)
-#define INFINIPATH_I_RCVURG_SHIFT 0
-#define INFINIPATH_I_RCVAVAIL_MASK ((1U<<5)-1)
-#define INFINIPATH_I_RCVAVAIL_SHIFT 12
-
-/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
-#define INFINIPATH_HWE_PCIEMEMPARITYERR_MASK  0x000000000000003fULL
-#define INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT 0
-#define INFINIPATH_HWE_PCIEPOISONEDTLP      0x0000000010000000ULL
-#define INFINIPATH_HWE_PCIECPLTIMEOUT       0x0000000020000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYXTLH    0x0000000040000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYXADM    0x0000000080000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYRADM    0x0000000100000000ULL
-#define INFINIPATH_HWE_COREPLL_FBSLIP       0x0080000000000000ULL
-#define INFINIPATH_HWE_COREPLL_RFSLIP       0x0100000000000000ULL
-#define INFINIPATH_HWE_PCIE1PLLFAILED       0x0400000000000000ULL
-#define INFINIPATH_HWE_PCIE0PLLFAILED       0x0800000000000000ULL
-#define INFINIPATH_HWE_SERDESPLLFAILED      0x1000000000000000ULL
-
-#define IBA6120_IBCS_LINKTRAININGSTATE_MASK 0xf
-#define IBA6120_IBCS_LINKSTATE_SHIFT 4
-
-/* kr_extstatus bits */
-#define INFINIPATH_EXTS_FREQSEL 0x2
-#define INFINIPATH_EXTS_SERDESSEL 0x4
-#define INFINIPATH_EXTS_MEMBIST_ENDTEST     0x0000000000004000
-#define INFINIPATH_EXTS_MEMBIST_FOUND       0x0000000000008000
-
-/* kr_xgxsconfig bits */
-#define INFINIPATH_XGXS_RESET          0x5ULL
-
-#define _IPATH_GPIO_SDA_NUM 1
-#define _IPATH_GPIO_SCL_NUM 0
-
-#define IPATH_GPIO_SDA (1ULL << \
-	(_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-#define IPATH_GPIO_SCL (1ULL << \
-	(_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-
-#define INFINIPATH_RT_BUFSIZE_MASK 0xe0000000ULL
-#define INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid) \
-	((((tid) & INFINIPATH_RT_BUFSIZE_MASK) >> 29) + 11 - 1)
-#define INFINIPATH_RT_BUFSIZE(tid) (1 << INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid))
-#define INFINIPATH_RT_IS_VALID(tid) \
-	(((tid) & INFINIPATH_RT_BUFSIZE_MASK) && \
-	 ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) != INFINIPATH_RT_BUFSIZE_MASK)))
-#define INFINIPATH_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */
-#define INFINIPATH_RT_ADDR_SHIFT 10
-
-#define INFINIPATH_R_INTRAVAIL_SHIFT 16
-#define INFINIPATH_R_TAILUPD_SHIFT 31
-
-/* 6120 specific hardware errors... */
-static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = {
-	INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"),
-	INFINIPATH_HWE_MSG(PCIECPLTIMEOUT, "PCIe completion timeout"),
-	/*
-	 * In practice, it's unlikely wthat we'll see PCIe PLL, or bus
-	 * parity or memory parity error failures, because most likely we
-	 * won't be able to talk to the core of the chip.  Nonetheless, we
-	 * might see them, if they are in parts of the PCIe core that aren't
-	 * essential.
-	 */
-	INFINIPATH_HWE_MSG(PCIE1PLLFAILED, "PCIePLL1"),
-	INFINIPATH_HWE_MSG(PCIE0PLLFAILED, "PCIePLL0"),
-	INFINIPATH_HWE_MSG(PCIEBUSPARITYXTLH, "PCIe XTLH core parity"),
-	INFINIPATH_HWE_MSG(PCIEBUSPARITYXADM, "PCIe ADM TX core parity"),
-	INFINIPATH_HWE_MSG(PCIEBUSPARITYRADM, "PCIe ADM RX core parity"),
-	INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"),
-	INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
-};
-
-#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
-		        INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
-		        << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
-#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
-			  << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
-
-static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *,
-			       u32, unsigned long);
-
-/*
- * On platforms using this chip, and not having ordered WC stores, we
- * can get TXE parity errors due to speculative reads to the PIO buffers,
- * and this, due to a chip bug can result in (many) false parity error
- * reports.  So it's a debug print on those, and an info print on systems
- * where the speculative reads don't occur.
- */
-static void ipath_pe_txe_recover(struct ipath_devdata *dd)
-{
-	if (ipath_unordered_wc())
-		ipath_dbg("Recovering from TXE PIO parity error\n");
-	else {
-		++ipath_stats.sps_txeparity;
-		dev_info(&dd->pcidev->dev,
-			"Recovering from TXE PIO parity error\n");
-	}
-}
-
-
-/**
- * ipath_pe_handle_hwerrors - display hardware errors.
- * @dd: the infinipath device
- * @msg: the output buffer
- * @msgl: the size of the output buffer
- *
- * Use same msg buffer as regular errors to avoid excessive stack
- * use.  Most hardware errors are catastrophic, but for right now,
- * we'll print them and continue.  We reuse the same message buffer as
- * ipath_handle_errors() to avoid excessive stack usage.
- */
-static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
-				     size_t msgl)
-{
-	ipath_err_t hwerrs;
-	u32 bits, ctrl;
-	int isfatal = 0;
-	char bitsmsg[64];
-	int log_idx;
-
-	hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
-	if (!hwerrs) {
-		/*
-		 * better than printing cofusing messages
-		 * This seems to be related to clearing the crc error, or
-		 * the pll error during init.
-		 */
-		ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
-		return;
-	} else if (hwerrs == ~0ULL) {
-		ipath_dev_err(dd, "Read of hardware error status failed "
-			      "(all bits set); ignoring\n");
-		return;
-	}
-	ipath_stats.sps_hwerrs++;
-
-	/* Always clear the error status register, except MEMBISTFAIL,
-	 * regardless of whether we continue or stop using the chip.
-	 * We want that set so we know it failed, even across driver reload.
-	 * We'll still ignore it in the hwerrmask.  We do this partly for
-	 * diagnostics, but also for support */
-	ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
-			 hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
-
-	hwerrs &= dd->ipath_hwerrmask;
-
-	/* We log some errors to EEPROM, check if we have any of those. */
-	for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx)
-		if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log)
-			ipath_inc_eeprom_err(dd, log_idx, 1);
-
-	/*
-	 * make sure we get this much out, unless told to be quiet,
-	 * or it's occurred within the last 5 seconds
-	 */
-	if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
-			RXE_EAGER_PARITY)) ||
-	    (ipath_debug & __IPATH_VERBDBG))
-		dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
-			 "(cleared)\n", (unsigned long long) hwerrs);
-	dd->ipath_lasthwerror |= hwerrs;
-
-	if (hwerrs & ~dd->ipath_hwe_bitsextant)
-		ipath_dev_err(dd, "hwerror interrupt with unknown errors "
-			      "%llx set\n", (unsigned long long)
-			      (hwerrs & ~dd->ipath_hwe_bitsextant));
-
-	ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
-	if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
-		/*
-		 * parity errors in send memory are recoverable,
-		 * just cancel the send (if indicated in * sendbuffererror),
-		 * count the occurrence, unfreeze (if no other handled
-		 * hardware error bits are set), and continue. They can
-		 * occur if a processor speculative read is done to the PIO
-		 * buffer while we are sending a packet, for example.
-		 */
-		if (hwerrs & TXE_PIO_PARITY) {
-			ipath_pe_txe_recover(dd);
-			hwerrs &= ~TXE_PIO_PARITY;
-		}
-		if (!hwerrs) {
-			static u32 freeze_cnt;
-
-			freeze_cnt++;
-			ipath_dbg("Clearing freezemode on ignored or recovered "
-				  "hardware error (%u)\n", freeze_cnt);
-			ipath_clear_freeze(dd);
-		}
-	}
-
-	*msg = '\0';
-
-	if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
-		strlcat(msg, "[Memory BIST test failed, InfiniPath hardware unusable]",
-			msgl);
-		/* ignore from now on, so disable until driver reloaded */
-		*dd->ipath_statusp |= IPATH_STATUS_HWERROR;
-		dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
-		ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
-				 dd->ipath_hwerrmask);
-	}
-
-	ipath_format_hwerrors(hwerrs,
-			      ipath_6120_hwerror_msgs,
-			      sizeof(ipath_6120_hwerror_msgs)/
-			      sizeof(ipath_6120_hwerror_msgs[0]),
-			      msg, msgl);
-
-	if (hwerrs & (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK
-		      << INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT)) {
-		bits = (u32) ((hwerrs >>
-			       INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) &
-			      INFINIPATH_HWE_PCIEMEMPARITYERR_MASK);
-		snprintf(bitsmsg, sizeof bitsmsg,
-			 "[PCIe Mem Parity Errs %x] ", bits);
-		strlcat(msg, bitsmsg, msgl);
-	}
-
-#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP |	\
-			 INFINIPATH_HWE_COREPLL_RFSLIP )
-
-	if (hwerrs & _IPATH_PLL_FAIL) {
-		snprintf(bitsmsg, sizeof bitsmsg,
-			 "[PLL failed (%llx), InfiniPath hardware unusable]",
-			 (unsigned long long) hwerrs & _IPATH_PLL_FAIL);
-		strlcat(msg, bitsmsg, msgl);
-		/* ignore from now on, so disable until driver reloaded */
-		dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
-		ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
-				 dd->ipath_hwerrmask);
-	}
-
-	if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
-		/*
-		 * If it occurs, it is left masked since the external
-		 * interface is unused
-		 */
-		dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
-		ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
-				 dd->ipath_hwerrmask);
-	}
-
-	if (hwerrs) {
-		/*
-		 * if any set that we aren't ignoring; only
-		 * make the complaint once, in case it's stuck
-		 * or recurring, and we get here multiple
-		 * times.
-		 */
-		ipath_dev_err(dd, "%s hardware error\n", msg);
-		if (dd->ipath_flags & IPATH_INITTED) {
-			ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
-			ipath_setup_pe_setextled(dd,
-				INFINIPATH_IBCS_L_STATE_DOWN,
-				INFINIPATH_IBCS_LT_STATE_DISABLED);
-			ipath_dev_err(dd, "Fatal Hardware Error (freeze "
-					  "mode), no longer usable, SN %.16s\n",
-					  dd->ipath_serial);
-			isfatal = 1;
-		}
-		*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
-		/* mark as having had error */
-		*dd->ipath_statusp |= IPATH_STATUS_HWERROR;
-		/*
-		 * mark as not usable, at a minimum until driver
-		 * is reloaded, probably until reboot, since no
-		 * other reset is possible.
-		 */
-		dd->ipath_flags &= ~IPATH_INITTED;
-	} else
-		*msg = 0; /* recovered from all of them */
-
-	if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg && msg) {
-		/*
-		 * for /sys status file ; if no trailing brace is copied,
-		 * we'll know it was truncated.
-		 */
-		snprintf(dd->ipath_freezemsg, dd->ipath_freezelen,
-			 "{%s}", msg);
-	}
-}
-
-/**
- * ipath_pe_boardname - fill in the board name
- * @dd: the infinipath device
- * @name: the output buffer
- * @namelen: the size of the output buffer
- *
- * info is based on the board revision register
- */
-static int ipath_pe_boardname(struct ipath_devdata *dd, char *name,
-			      size_t namelen)
-{
-	char *n = NULL;
-	u8 boardrev = dd->ipath_boardrev;
-	int ret;
-
-	switch (boardrev) {
-	case 0:
-		n = "InfiniPath_Emulation";
-		break;
-	case 1:
-		n = "InfiniPath_QLE7140-Bringup";
-		break;
-	case 2:
-		n = "InfiniPath_QLE7140";
-		break;
-	case 3:
-		n = "InfiniPath_QMI7140";
-		break;
-	case 4:
-		n = "InfiniPath_QEM7140";
-		break;
-	case 5:
-		n = "InfiniPath_QMH7140";
-		break;
-	case 6:
-		n = "InfiniPath_QLE7142";
-		break;
-	default:
-		ipath_dev_err(dd,
-			      "Don't yet know about board with ID %u\n",
-			      boardrev);
-		snprintf(name, namelen, "Unknown_InfiniPath_PCIe_%u",
-			 boardrev);
-		break;
-	}
-	if (n)
-		snprintf(name, namelen, "%s", n);
-
-	if (dd->ipath_majrev != 4 || !dd->ipath_minrev || dd->ipath_minrev>2) {
-		ipath_dev_err(dd, "Unsupported InfiniPath hardware revision %u.%u!\n",
-			      dd->ipath_majrev, dd->ipath_minrev);
-		ret = 1;
-	} else {
-		ret = 0;
-		if (dd->ipath_minrev >= 2)
-			dd->ipath_f_put_tid = ipath_pe_put_tid_2;
-	}
-
-	/*
-	 * set here, not in ipath_init_*_funcs because we have to do
-	 * it after we can read chip registers.
-	 */
-	dd->ipath_ureg_align =
-		ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
-
-	return ret;
-}
-
-/**
- * ipath_pe_init_hwerrors - enable hardware errors
- * @dd: the infinipath device
- *
- * now that we have finished initializing everything that might reasonably
- * cause a hardware error, and cleared those errors bits as they occur,
- * we can enable hardware errors in the mask (potentially enabling
- * freeze mode), and enable hardware errors as errors (along with
- * everything else) in errormask
- */
-static void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
-{
-	ipath_err_t val;
-	u64 extsval;
-
-	extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
-
-	if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
-		ipath_dev_err(dd, "MemBIST did not complete!\n");
-	if (extsval & INFINIPATH_EXTS_MEMBIST_FOUND)
-		ipath_dbg("MemBIST corrected\n");
-
-	val = ~0ULL;	/* barring bugs, all hwerrors become interrupts, */
-
-	if (!dd->ipath_boardrev)	// no PLL for Emulator
-		val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
-
-	if (dd->ipath_minrev < 2) {
-		/* workaround bug 9460 in internal interface bus parity
-		 * checking. Fixed (HW bug 9490) in Rev2.
-		 */
-		val &= ~INFINIPATH_HWE_PCIEBUSPARITYRADM;
-	}
-	dd->ipath_hwerrmask = val;
-}
-
-/**
- * ipath_pe_bringup_serdes - bring up the serdes
- * @dd: the infinipath device
- */
-static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
-{
-	u64 val, config1, prev_val;
-	int ret = 0;
-
-	ipath_dbg("Trying to bringup serdes\n");
-
-	if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
-	    INFINIPATH_HWE_SERDESPLLFAILED) {
-		ipath_dbg("At start, serdes PLL failed bit set "
-			  "in hwerrstatus, clearing and continuing\n");
-		ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
-				 INFINIPATH_HWE_SERDESPLLFAILED);
-	}
-
-	dd->ibdeltainprog = 1;
-	dd->ibsymsnap =
-	     ipath_read_creg32(dd, dd->ipath_cregs->cr_ibsymbolerrcnt);
-	dd->iblnkerrsnap =
-	     ipath_read_creg32(dd, dd->ipath_cregs->cr_iblinkerrrecovcnt);
-
-	val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
-	config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1);
-
-	ipath_cdbg(VERBOSE, "SerDes status config0=%llx config1=%llx, "
-		   "xgxsconfig %llx\n", (unsigned long long) val,
-		   (unsigned long long) config1, (unsigned long long)
-		   ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
-
-	/*
-	 * Force reset on, also set rxdetect enable.  Must do before reading
-	 * serdesstatus at least for simulation, or some of the bits in
-	 * serdes status will come back as undefined and cause simulation
-	 * failures
-	 */
-	val |= INFINIPATH_SERDC0_RESET_PLL | INFINIPATH_SERDC0_RXDETECT_EN
-		| INFINIPATH_SERDC0_L1PWR_DN;
-	ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
-	/* be sure chip saw it */
-	ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-	udelay(5);		/* need pll reset set at least for a bit */
-	/*
-	 * after PLL is reset, set the per-lane Resets and TxIdle and
-	 * clear the PLL reset and rxdetect (to get falling edge).