IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters

Add a low-level IB driver for QLogic PCIe adapters.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

51 files changed, 52965 insertions, 0 deletions

diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 330d2a42336..89d70de5e23 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -43,6 +43,7 @@ config INFINIBAND_ADDR_TRANS
 
 source "drivers/infiniband/hw/mthca/Kconfig"
 source "drivers/infiniband/hw/ipath/Kconfig"
+source "drivers/infiniband/hw/qib/Kconfig"
 source "drivers/infiniband/hw/ehca/Kconfig"
 source "drivers/infiniband/hw/amso1100/Kconfig"
 source "drivers/infiniband/hw/cxgb3/Kconfig"
diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile
index 0c4e589d746..9cc7a47d3e6 100644
--- a/drivers/infiniband/Makefile
+++ b/drivers/infiniband/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_INFINIBAND)		+= core/
 obj-$(CONFIG_INFINIBAND_MTHCA)		+= hw/mthca/
 obj-$(CONFIG_INFINIBAND_IPATH)		+= hw/ipath/
+obj-$(CONFIG_INFINIBAND_QIB)		+= hw/qib/
 obj-$(CONFIG_INFINIBAND_EHCA)		+= hw/ehca/
 obj-$(CONFIG_INFINIBAND_AMSO1100)	+= hw/amso1100/
 obj-$(CONFIG_INFINIBAND_CXGB3)		+= hw/cxgb3/
diff --git a/drivers/infiniband/hw/qib/Kconfig b/drivers/infiniband/hw/qib/Kconfig
new file mode 100644
index 00000000000..7c03a70c55a
--- /dev/null
+++ b/drivers/infiniband/hw/qib/Kconfig
@@ -0,0 +1,7 @@
+config INFINIBAND_QIB
+	tristate "QLogic PCIe HCA support"
+	depends on 64BIT && NET
+	---help---
+	This is a low-level driver for QLogic PCIe QLE InfiniBand host
+	channel adapters.  This driver does not support the QLogic
+	HyperTransport card (model QHT7140).
diff --git a/drivers/infiniband/hw/qib/Makefile b/drivers/infiniband/hw/qib/Makefile
new file mode 100644
index 00000000000..c6515a1b9a6
--- /dev/null
+++ b/drivers/infiniband/hw/qib/Makefile
@@ -0,0 +1,15 @@
+obj-$(CONFIG_INFINIBAND_QIB) += ib_qib.o
+
+ib_qib-y := qib_cq.o qib_diag.o qib_dma.o qib_driver.o qib_eeprom.o \
+	qib_file_ops.o qib_fs.o qib_init.o qib_intr.o qib_keys.o \
+	qib_mad.o qib_mmap.o qib_mr.o qib_pcie.o qib_pio_copy.o \
+	qib_qp.o qib_qsfp.o qib_rc.o qib_ruc.o qib_sdma.o qib_srq.o \
+	qib_sysfs.o qib_twsi.o qib_tx.o qib_uc.o qib_ud.o \
+	qib_user_pages.o qib_user_sdma.o qib_verbs_mcast.o qib_iba7220.o \
+	qib_sd7220.o qib_sd7220_img.o qib_iba7322.o qib_verbs.o
+
+# 6120 has no fallback if no MSI interrupts, others can do INTx
+ib_qib-$(CONFIG_PCI_MSI) += qib_iba6120.o
+
+ib_qib-$(CONFIG_X86_64) += qib_wc_x86_64.o
+ib_qib-$(CONFIG_PPC64) += qib_wc_ppc64.o
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
new file mode 100644
index 00000000000..32d9208efcf
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -0,0 +1,1439 @@
+#ifndef _QIB_KERNEL_H
+#define _QIB_KERNEL_H
+/*
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This header file is the base header file for qlogic_ib kernel code
+ * qib_user.h serves a similar purpose for user code.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/fs.h>
+#include <linux/completion.h>
+#include <linux/kref.h>
+#include <linux/sched.h>
+
+#include "qib_common.h"
+#include "qib_verbs.h"
+
+/* only s/w major version of QLogic_IB we can handle */
+#define QIB_CHIP_VERS_MAJ 2U
+
+/* don't care about this except printing */
+#define QIB_CHIP_VERS_MIN 0U
+
+/* The Organization Unique Identifier (Mfg code), and its position in GUID */
+#define QIB_OUI 0x001175
+#define QIB_OUI_LSB 40
+
+/*
+ * per driver stats, either not device nor port-specific, or
+ * summed over all of the devices and ports.
+ * They are described by name via ipathfs filesystem, so layout
+ * and number of elements can change without breaking compatibility.
+ * If members are added or deleted qib_statnames[] in qib_fs.c must
+ * change to match.
+ */
+struct qlogic_ib_stats {
+	__u64 sps_ints; /* number of interrupts handled */
+	__u64 sps_errints; /* number of error interrupts */
+	__u64 sps_txerrs; /* tx-related packet errors */
+	__u64 sps_rcverrs; /* non-crc rcv packet errors */
+	__u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */
+	__u64 sps_nopiobufs; /* no pio bufs avail from kernel */
+	__u64 sps_ctxts; /* number of contexts currently open */
+	__u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */
+	__u64 sps_buffull;
+	__u64 sps_hdrfull;
+};
+
+extern struct qlogic_ib_stats qib_stats;
+extern struct pci_error_handlers qib_pci_err_handler;
+extern struct pci_driver qib_driver;
+
+#define QIB_CHIP_SWVERSION QIB_CHIP_VERS_MAJ
+/*
+ * First-cut critierion for "device is active" is
+ * two thousand dwords combined Tx, Rx traffic per
+ * 5-second interval. SMA packets are 64 dwords,
+ * and occur "a few per second", presumably each way.
+ */
+#define QIB_TRAFFIC_ACTIVE_THRESHOLD (2000)
+
+/*
+ * Struct used to indicate which errors are logged in each of the
+ * error-counters that are logged to EEPROM. A counter is incremented
+ * _once_ (saturating at 255) for each event with any bits set in
+ * the error or hwerror register masks below.
+ */
+#define QIB_EEP_LOG_CNT (4)
+struct qib_eep_log_mask {
+	u64 errs_to_log;
+	u64 hwerrs_to_log;
+};
+
+/*
+ * Below contains all data related to a single context (formerly called port).
+ */
+struct qib_ctxtdata {
+	void **rcvegrbuf;
+	dma_addr_t *rcvegrbuf_phys;
+	/* rcvhdrq base, needs mmap before useful */
+	void *rcvhdrq;
+	/* kernel virtual address where hdrqtail is updated */
+	void *rcvhdrtail_kvaddr;
+	/*
+	 * temp buffer for expected send setup, allocated at open, instead
+	 * of each setup call
+	 */
+	void *tid_pg_list;
+	/*
+	 * Shared page for kernel to signal user processes that send buffers
+	 * need disarming.  The process should call QIB_CMD_DISARM_BUFS
+	 * or QIB_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set.
+	 */
+	unsigned long *user_event_mask;
+	/* when waiting for rcv or pioavail */
+	wait_queue_head_t wait;
+	/*
+	 * rcvegr bufs base, physical, must fit
+	 * in 44 bits so 32 bit programs mmap64 44 bit works)
+	 */
+	dma_addr_t rcvegr_phys;
+	/* mmap of hdrq, must fit in 44 bits */
+	dma_addr_t rcvhdrq_phys;
+	dma_addr_t rcvhdrqtailaddr_phys;
+
+	/*
+	 * number of opens (including slave sub-contexts) on this instance
+	 * (ignoring forks, dup, etc. for now)
+	 */
+	int cnt;
+	/*
+	 * how much space to leave at start of eager TID entries for
+	 * protocol use, on each TID
+	 */
+	/* instead of calculating it */
+	unsigned ctxt;
+	/* non-zero if ctxt is being shared. */
+	u16 subctxt_cnt;
+	/* non-zero if ctxt is being shared. */
+	u16 subctxt_id;
+	/* number of eager TID entries. */
+	u16 rcvegrcnt;
+	/* index of first eager TID entry. */
+	u16 rcvegr_tid_base;
+	/* number of pio bufs for this ctxt (all procs, if shared) */
+	u32 piocnt;
+	/* first pio buffer for this ctxt */
+	u32 pio_base;
+	/* chip offset of PIO buffers for this ctxt */
+	u32 piobufs;
+	/* how many alloc_pages() chunks in rcvegrbuf_pages */
+	u32 rcvegrbuf_chunks;
+	/* how many egrbufs per chunk */
+	u32 rcvegrbufs_perchunk;
+	/* order for rcvegrbuf_pages */
+	size_t rcvegrbuf_size;
+	/* rcvhdrq size (for freeing) */
+	size_t rcvhdrq_size;
+	/* per-context flags for fileops/intr communication */
+	unsigned long flag;
+	/* next expected TID to check when looking for free */
+	u32 tidcursor;
+	/* WAIT_RCV that timed out, no interrupt */
+	u32 rcvwait_to;
+	/* WAIT_PIO that timed out, no interrupt */
+	u32 piowait_to;
+	/* WAIT_RCV already happened, no wait */
+	u32 rcvnowait;
+	/* WAIT_PIO already happened, no wait */
+	u32 pionowait;
+	/* total number of polled urgent packets */
+	u32 urgent;
+	/* saved total number of polled urgent packets for poll edge trigger */
+	u32 urgent_poll;
+	/* pid of process using this ctxt */
+	pid_t pid;
+	pid_t subpid[QLOGIC_IB_MAX_SUBCTXT];
+	/* same size as task_struct .comm[], command that opened context */
+	char comm[16];
+	/* pkeys set by this use of this ctxt */
+	u16 pkeys[4];
+	/* so file ops can get at unit */
+	struct qib_devdata *dd;
+	/* so funcs that need physical port can get it easily */
+	struct qib_pportdata *ppd;
+	/* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
+	void *subctxt_uregbase;
+	/* An array of pages for the eager receive buffers * N */
+	void *subctxt_rcvegrbuf;
+	/* An array of pages for the eager header queue entries * N */
+	void *subctxt_rcvhdr_base;
+	/* The version of the library which opened this ctxt */
+	u32 userversion;
+	/* Bitmask of active slaves */
+	u32 active_slaves;
+	/* Type of packets or conditions we want to poll for */
+	u16 poll_type;
+	/* receive packet sequence counter */
+	u8 seq_cnt;
+	u8 redirect_seq_cnt;
+	/* ctxt rcvhdrq head offset */
+	u32 head;
+	u32 pkt_count;
+	/* QPs waiting for context processing */
+	struct list_head qp_wait_list;
+};
+
+struct qib_sge_state;
+
+struct qib_sdma_txreq {
+	int                 flags;
+	int                 sg_count;
+	dma_addr_t          addr;
+	void              (*callback)(struct qib_sdma_txreq *, int);
+	u16                 start_idx;  /* sdma private */
+	u16                 next_descq_idx;  /* sdma private */
+	struct list_head    list;       /* sdma private */
+};
+
+struct qib_sdma_desc {
+	__le64 qw[2];
+};
+
+struct qib_verbs_txreq {
+	struct qib_sdma_txreq   txreq;
+	struct qib_qp           *qp;
+	struct qib_swqe         *wqe;
+	u32                     dwords;
+	u16                     hdr_dwords;
+	u16                     hdr_inx;
+	struct qib_pio_header	*align_buf;
+	struct qib_mregion	*mr;
+	struct qib_sge_state    *ss;
+};
+
+#define QIB_SDMA_TXREQ_F_USELARGEBUF  0x1
+#define QIB_SDMA_TXREQ_F_HEADTOHOST   0x2
+#define QIB_SDMA_TXREQ_F_INTREQ       0x4
+#define QIB_SDMA_TXREQ_F_FREEBUF      0x8
+#define QIB_SDMA_TXREQ_F_FREEDESC     0x10
+
+#define QIB_SDMA_TXREQ_S_OK        0
+#define QIB_SDMA_TXREQ_S_SENDERROR 1
+#define QIB_SDMA_TXREQ_S_ABORTED   2
+#define QIB_SDMA_TXREQ_S_SHUTDOWN  3
+
+/*
+ * Get/Set IB link-level config parameters for f_get/set_ib_cfg()
+ * Mostly for MADs that set or query link parameters, also ipath
+ * config interfaces
+ */
+#define QIB_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */
+#define QIB_IB_CFG_LWID_ENB 2 /* allowed Link-width */
+#define QIB_IB_CFG_LWID 3 /* currently active Link-width */
+#define QIB_IB_CFG_SPD_ENB 4 /* allowed Link speeds */
+#define QIB_IB_CFG_SPD 5 /* current Link spd */
+#define QIB_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */
+#define QIB_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */
+#define QIB_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */
+#define QIB_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */
+#define QIB_IB_CFG_OP_VLS 10 /* operational VLs */
+#define QIB_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */
+#define QIB_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */
+#define QIB_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */
+#define QIB_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */
+#define QIB_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */
+#define QIB_IB_CFG_PKEYS 16 /* update partition keys */
+#define QIB_IB_CFG_MTU 17 /* update MTU in IBC */
+#define QIB_IB_CFG_LSTATE 18 /* update linkcmd and linkinitcmd in IBC */
+#define QIB_IB_CFG_VL_HIGH_LIMIT 19
+#define QIB_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */
+#define QIB_IB_CFG_PORT 21 /* switch port we are connected to */
+
+/*
+ * for CFG_LSTATE: LINKCMD in upper 16 bits, LINKINITCMD in lower 16
+ * IB_LINKINITCMD_POLL and SLEEP are also used as set/get values for
+ * QIB_IB_CFG_LINKDEFAULT cmd
+ */
+#define   IB_LINKCMD_DOWN   (0 << 16)
+#define   IB_LINKCMD_ARMED  (1 << 16)
+#define   IB_LINKCMD_ACTIVE (2 << 16)
+#define   IB_LINKINITCMD_NOP     0
+#define   IB_LINKINITCMD_POLL    1
+#define   IB_LINKINITCMD_SLEEP   2
+#define   IB_LINKINITCMD_DISABLE 3
+
+/*
+ * valid states passed to qib_set_linkstate() user call
+ */
+#define QIB_IB_LINKDOWN         0
+#define QIB_IB_LINKARM          1
+#define QIB_IB_LINKACTIVE       2
+#define QIB_IB_LINKDOWN_ONLY    3
+#define QIB_IB_LINKDOWN_SLEEP   4
+#define QIB_IB_LINKDOWN_DISABLE 5
+
+/*
+ * These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
+ * negotiation) are used for the 3rd argument to path_f_set_ib_cfg
+ * with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs.  They
+ * are also the the possible values for qib_link_speed_enabled and active
+ * The values were chosen to match values used within the IB spec.
+ */
+#define QIB_IB_SDR 1
+#define QIB_IB_DDR 2
+#define QIB_IB_QDR 4
+
+#define QIB_DEFAULT_MTU 4096
+
+/*
+ * Possible IB config parameters for f_get/set_ib_table()
+ */
+#define QIB_IB_TBL_VL_HIGH_ARB 1 /* Get/set VL high priority weights */
+#define QIB_IB_TBL_VL_LOW_ARB 2 /* Get/set VL low priority weights */
+
+/*
+ * Possible "operations" for f_rcvctrl(ppd, op, ctxt)
+ * these are bits so they can be combined, e.g.
+ * QIB_RCVCTRL_INTRAVAIL_ENB | QIB_RCVCTRL_CTXT_ENB
+ */
+#define QIB_RCVCTRL_TAILUPD_ENB 0x01
+#define QIB_RCVCTRL_TAILUPD_DIS 0x02
+#define QIB_RCVCTRL_CTXT_ENB 0x04
+#define QIB_RCVCTRL_CTXT_DIS 0x08
+#define QIB_RCVCTRL_INTRAVAIL_ENB 0x10
+#define QIB_RCVCTRL_INTRAVAIL_DIS 0x20
+#define QIB_RCVCTRL_PKEY_ENB 0x40  /* Note, default is enabled */
+#define QIB_RCVCTRL_PKEY_DIS 0x80
+#define QIB_RCVCTRL_BP_ENB 0x0100
+#define QIB_RCVCTRL_BP_DIS 0x0200
+#define QIB_RCVCTRL_TIDFLOW_ENB 0x0400
+#define QIB_RCVCTRL_TIDFLOW_DIS 0x0800
+
+/*
+ * Possible "operations" for f_sendctrl(ppd, op, var)
+ * these are bits so they can be combined, e.g.
+ * QIB_SENDCTRL_BUFAVAIL_ENB | QIB_SENDCTRL_ENB
+ * Some operations (e.g. DISARM, ABORT) are known to
+ * be "one-shot", so do not modify shadow.
+ */
+#define QIB_SENDCTRL_DISARM       (0x1000)
+#define QIB_SENDCTRL_DISARM_BUF(bufn) ((bufn) | QIB_SENDCTRL_DISARM)
+	/* available (0x2000) */
+#define QIB_SENDCTRL_AVAIL_DIS    (0x4000)
+#define QIB_SENDCTRL_AVAIL_ENB    (0x8000)
+#define QIB_SENDCTRL_AVAIL_BLIP  (0x10000)
+#define QIB_SENDCTRL_SEND_DIS    (0x20000)
+#define QIB_SENDCTRL_SEND_ENB    (0x40000)
+#define QIB_SENDCTRL_FLUSH       (0x80000)
+#define QIB_SENDCTRL_CLEAR      (0x100000)
+#define QIB_SENDCTRL_DISARM_ALL (0x200000)
+
+/*
+ * These are the generic indices for requesting per-port
+ * counter values via the f_portcntr function.  They
+ * are always returned as 64 bit values, although most
+ * are 32 bit counters.
+ */
+/* send-related counters */
+#define QIBPORTCNTR_PKTSEND         0U
+#define QIBPORTCNTR_WORDSEND        1U
+#define QIBPORTCNTR_PSXMITDATA      2U
+#define QIBPORTCNTR_PSXMITPKTS      3U
+#define QIBPORTCNTR_PSXMITWAIT      4U
+#define QIBPORTCNTR_SENDSTALL       5U
+/* receive-related counters */
+#define QIBPORTCNTR_PKTRCV          6U
+#define QIBPORTCNTR_PSRCVDATA       7U
+#define QIBPORTCNTR_PSRCVPKTS       8U
+#define QIBPORTCNTR_RCVEBP          9U
+#define QIBPORTCNTR_RCVOVFL         10U
+#define QIBPORTCNTR_WORDRCV         11U
+/* IB link related error counters */
+#define QIBPORTCNTR_RXLOCALPHYERR   12U
+#define QIBPORTCNTR_RXVLERR         13U
+#define QIBPORTCNTR_ERRICRC         14U
+#define QIBPORTCNTR_ERRVCRC         15U
+#define QIBPORTCNTR_ERRLPCRC        16U
+#define QIBPORTCNTR_BADFORMAT       17U
+#define QIBPORTCNTR_ERR_RLEN        18U
+#define QIBPORTCNTR_IBSYMBOLERR     19U
+#define QIBPORTCNTR_INVALIDRLEN     20U
+#define QIBPORTCNTR_UNSUPVL         21U
+#define QIBPORTCNTR_EXCESSBUFOVFL   22U
+#define QIBPORTCNTR_ERRLINK         23U
+#define QIBPORTCNTR_IBLINKDOWN      24U
+#define QIBPORTCNTR_IBLINKERRRECOV  25U
+#define QIBPORTCNTR_LLI             26U
+/* other error counters */
+#define QIBPORTCNTR_RXDROPPKT       27U
+#define QIBPORTCNTR_VL15PKTDROP     28U
+#define QIBPORTCNTR_ERRPKEY         29U
+#define QIBPORTCNTR_KHDROVFL        30U
+/* sampling counters (these are actually control registers) */
+#define QIBPORTCNTR_PSINTERVAL      31U
+#define QIBPORTCNTR_PSSTART         32U
+#define QIBPORTCNTR_PSSTAT          33U
+
+/* how often we check for packet activity for "power on hours (in seconds) */
+#define ACTIVITY_TIMER 5
+
+/* Below is an opaque struct. Each chip (device) can maintain
+ * private data needed for its operation, but not germane to the
+ * rest of the driver.  For convenience, we define another that
+ * is chip-specific, per-port
+ */
+struct qib_chip_specific;
+struct qib_chipport_specific;
+
+enum qib_sdma_states {
+	qib_sdma_state_s00_hw_down,
+	qib_sdma_state_s10_hw_start_up_wait,
+	qib_sdma_state_s20_idle,
+	qib_sdma_state_s30_sw_clean_up_wait,
+	qib_sdma_state_s40_hw_clean_up_wait,
+	qib_sdma_state_s50_hw_halt_wait,
+	qib_sdma_state_s99_running,
+};
+
+enum qib_sdma_events {
+	qib_sdma_event_e00_go_hw_down,
+	qib_sdma_event_e10_go_hw_start,
+	qib_sdma_event_e20_hw_started,
+	qib_sdma_event_e30_go_running,
+	qib_sdma_event_e40_sw_cleaned,
+	qib_sdma_event_e50_hw_cleaned,
+	qib_sdma_event_e60_hw_halted,
+	qib_sdma_event_e70_go_idle,
+	qib_sdma_event_e7220_err_halted,
+	qib_sdma_event_e7322_err_halted,
+	qib_sdma_event_e90_timer_tick,
+};
+
+extern char *qib_sdma_state_names[];
+extern char *qib_sdma_event_names[];
+
+struct sdma_set_state_action {
+	unsigned op_enable:1;
+	unsigned op_intenable:1;
+	unsigned op_halt:1;
+	unsigned op_drain:1;
+	unsigned go_s99_running_tofalse:1;
+	unsigned go_s99_running_totrue:1;
+};
+
+struct qib_sdma_state {
+	struct kref          kref;
+	struct completion    comp;
+	enum qib_sdma_states current_state;
+	struct sdma_set_state_action *set_state_action;
+	unsigned             current_op;
+	unsigned             go_s99_running;
+	unsigned             first_sendbuf;
+	unsigned             last_sendbuf; /* really last +1 */
+	/* debugging/devel */
+	enum qib_sdma_states previous_state;
+	unsigned             previous_op;
+	enum qib_sdma_events last_event;
+};
+
+struct xmit_wait {
+	struct timer_list timer;
+	u64 counter;
+	u8 flags;
+	struct cache {
+		u64 psxmitdata;
+		u64 psrcvdata;
+		u64 psxmitpkts;
+		u64 psrcvpkts;
+		u64 psxmitwait;
+	} counter_cache;
+};
+
+/*
+ * The structure below encapsulates data relevant to a physical IB Port.
+ * Current chips support only one such port, but the separation
+ * clarifies things a bit. Note that to conform to IB conventions,
+ * port-numbers are one-based. The first or only port is port1.
+ */
+struct qib_pportdata {
+	struct qib_ibport ibport_data;
+
+	struct qib_devdata *dd;
+	struct qib_chippport_specific *cpspec; /* chip-specific per-port */
+	struct kobject pport_kobj;
+	struct kobject sl2vl_kobj;
+	struct kobject diagc_kobj;
+
+	/* GUID for this interface, in network order */
+	__be64 guid;
+
+	/* QIB_POLL, etc. link-state specific flags, per port */
+	u32 lflags;
+	/* qib_lflags driver is waiting for */
+	u32 state_wanted;
+	spinlock_t lflags_lock;
+	/* number of (port-specific) interrupts for this port -- saturates... */
+	u32 int_counter;
+
+	/* ref count for each pkey */
+	atomic_t pkeyrefs[4];
+
+	/*
+	 * this address is mapped readonly into user processes so they can
+	 * get status cheaply, whenever they want.  One qword of status per port
+	 */
+	u64 *statusp;
+
+	/* SendDMA related entries */
+	spinlock_t            sdma_lock;
+	struct qib_sdma_state sdma_state;
+	unsigned long         sdma_buf_jiffies;
+	struct qib_sdma_desc *sdma_descq;
+	u64                   sdma_descq_added;
+	u64                   sdma_descq_removed;
+	u16                   sdma_descq_cnt;
+	u16                   sdma_descq_tail;
+	u16                   sdma_descq_head;
+	u16                   sdma_next_intr;
+	u16                   sdma_reset_wait;
+	u8                    sdma_generation;
+	struct tasklet_struct sdma_sw_clean_up_task;
+	struct list_head      sdma_activelist;
+
+	dma_addr_t       sdma_descq_phys;
+	volatile __le64 *sdma_head_dma; /* DMA'ed by chip */
+	dma_addr_t       sdma_head_phys;
+
+	wait_queue_head_t state_wait; /* for state_wanted */
+
+	/* HoL blocking for SMP replies */
+	unsigned          hol_state;
+	struct timer_list hol_timer;
+
+	/*
+	 * Shadow copies of registers; size indicates read access size.
+	 * Most of them are readonly, but some are write-only register,
+	 * where we manipulate the bits in the shadow copy, and then write
+	 * the shadow copy to qlogic_ib.
+	 *
+	 * We deliberately make most of these 32 bits, since they have
+	 * restricted range.  For any that we read, we won't to generate 32
+	 * bit accesses, since Opteron will generate 2 separate 32 bit HT
+	 * transactions for a 64 bit read, and we want to avoid unnecessary
+	 * bus transactions.
+	 */
+
+	/* This is the 64 bit group */
+	/* last ibcstatus