staging:iio: Move adis library out of staging

Now that the adis library no longer depends on the sw_ring buffer implementation
we can move it out of staging.

While we are at it also sort the entries in the iio Kconfig and Makefile to be
in alphabetical order.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

7 files changed, 612 insertions, 6 deletions

diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 65ae734c607..b2f963be399 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -63,11 +63,12 @@ config IIO_CONSUMERS_PER_TRIGGER
 source "drivers/iio/accel/Kconfig"
 source "drivers/iio/adc/Kconfig"
 source "drivers/iio/amplifiers/Kconfig"
-source "drivers/iio/light/Kconfig"
-source "drivers/iio/frequency/Kconfig"
-source "drivers/iio/dac/Kconfig"
 source "drivers/iio/common/Kconfig"
+source "drivers/iio/dac/Kconfig"
+source "drivers/iio/frequency/Kconfig"
 source "drivers/iio/gyro/Kconfig"
+source "drivers/iio/imu/Kconfig"
+source "drivers/iio/light/Kconfig"
 source "drivers/iio/magnetometer/Kconfig"
 
 endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index 31d76a07ec6..a0e8cdd67e4 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -14,9 +14,10 @@ obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
 obj-y += accel/
 obj-y += adc/
 obj-y += amplifiers/
-obj-y += light/
-obj-y += frequency/
-obj-y += dac/
 obj-y += common/
+obj-y += dac/
 obj-y += gyro/
+obj-y += frequency/
+obj-y += imu/
+obj-y += light/
 obj-y += magnetometer/
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
new file mode 100644
index 00000000000..c24410c873c
--- /dev/null
+++ b/drivers/iio/imu/Kconfig
@@ -0,0 +1,11 @@
+config IIO_ADIS_LIB
+	tristate
+	help
+	  A set of IO helper functions for the Analog Devices ADIS* device family.
+
+config IIO_ADIS_LIB_BUFFER
+	bool
+	select IIO_TRIGGERED_BUFFER
+	help
+	  A set of buffer helper functions for the Analog Devices ADIS* device
+	  family.
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
new file mode 100644
index 00000000000..97676ab5723
--- /dev/null
+++ b/drivers/iio/imu/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Inertial Measurement Units
+#
+
+adis_lib-y += adis.o
+adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o
+adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
+obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
new file mode 100644
index 00000000000..8259b774078
--- /dev/null
+++ b/drivers/iio/imu/adis.c
@@ -0,0 +1,337 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <asm/unaligned.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
+
+#define ADIS_MSC_CTRL_DATA_RDY_EN	BIT(2)
+#define ADIS_MSC_CTRL_DATA_RDY_POL_HIGH	BIT(1)
+#define ADIS_MSC_CTRL_DATA_RDY_DIO2	BIT(0)
+#define ADIS_GLOB_CMD_SW_RESET		BIT(7)
+
+/**
+ * adis_write_reg_8() - Write single byte to a register
+ * @adis: The adis device
+ * @reg: The address of the register to be written
+ * @val: The value to write
+ */
+int adis_write_reg_8(struct adis *adis, unsigned int reg, uint8_t val)
+{
+	int ret;
+
+	mutex_lock(&adis->txrx_lock);
+	adis->tx[0] = ADIS_WRITE_REG(reg);
+	adis->tx[1] = val;
+
+	ret = spi_write(adis->spi, adis->tx, 2);
+	mutex_unlock(&adis->txrx_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adis_write_reg_8);
+
+/**
+ * adis_write_reg_16() - Write 2 bytes to a pair of registers
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: Value to be written
+ */
+int adis_write_reg_16(struct adis *adis, unsigned int reg, uint16_t value)
+{
+	int ret;
+	struct spi_message msg;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = adis->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+			.delay_usecs = adis->data->write_delay,
+		}, {
+			.tx_buf = adis->tx + 2,
+			.bits_per_word = 8,
+			.len = 2,
+			.delay_usecs = adis->data->write_delay,
+		},
+	};
+
+	mutex_lock(&adis->txrx_lock);
+	adis->tx[0] = ADIS_WRITE_REG(reg);
+	adis->tx[1] = value & 0xff;
+	adis->tx[2] = ADIS_WRITE_REG(reg + 1);
+	adis->tx[3] = (value >> 8) & 0xff;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfers[0], &msg);
+	spi_message_add_tail(&xfers[1], &msg);
+	ret = spi_sync(adis->spi, &msg);
+	mutex_unlock(&adis->txrx_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adis_write_reg_16);
+
+/**
+ * adis_read_reg_16() - read 2 bytes from a 16-bit register
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ */
+int adis_read_reg_16(struct adis *adis, unsigned int reg, uint16_t *val)
+{
+	struct spi_message msg;
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = adis->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+			.delay_usecs = adis->data->read_delay,
+		}, {
+			.rx_buf = adis->rx,
+			.bits_per_word = 8,
+			.len = 2,
+			.delay_usecs = adis->data->read_delay,
+		},
+	};
+
+	mutex_lock(&adis->txrx_lock);
+	adis->tx[0] = ADIS_READ_REG(reg);
+	adis->tx[1] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfers[0], &msg);
+	spi_message_add_tail(&xfers[1], &msg);
+	ret = spi_sync(adis->spi, &msg);
+	if (ret) {
+		dev_err(&adis->spi->dev, "Failed to read 16 bit register 0x%02X: %d\n",
+				reg, ret);
+		goto error_ret;
+	}
+	*val = get_unaligned_be16(adis->rx);
+
+error_ret:
+	mutex_unlock(&adis->txrx_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adis_read_reg_16);
+
+/**
+ * adis_enable_irq() - Enable or disable data ready IRQ
+ * @adis: The adis device
+ * @enable: Whether to enable the IRQ
+ *
+ * Returns 0 on success, negative error code otherwise
+ */
+int adis_enable_irq(struct adis *adis, bool enable)
+{
+	int ret = 0;
+	uint16_t msc;
+
+	ret = adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
+	if (ret)
+		goto error_ret;
+
+	msc |= ADIS_MSC_CTRL_DATA_RDY_POL_HIGH;
+	msc &= ~ADIS_MSC_CTRL_DATA_RDY_DIO2;
+	if (enable)
+		msc |= ADIS_MSC_CTRL_DATA_RDY_EN;
+	else
+		msc &= ~ADIS_MSC_CTRL_DATA_RDY_EN;
+
+	ret = adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
+
+error_ret:
+	return ret;
+}
+EXPORT_SYMBOL(adis_enable_irq);
+
+/**
+ * adis_check_status() - Check the device for error conditions
+ * @adis: The adis device
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+int adis_check_status(struct adis *adis)
+{
+	uint16_t status;
+	int ret;
+	int i;
+
+	ret = adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
+	if (ret < 0)
+		return ret;
+
+	status &= adis->data->status_error_mask;
+
+	if (status == 0)
+		return 0;
+
+	for (i = 0; i < 16; ++i) {
+		if (status & BIT(i)) {
+			dev_err(&adis->spi->dev, "%s.\n",
+				adis->data->status_error_msgs[i]);
+		}
+	}
+
+	return -EIO;
+}
+EXPORT_SYMBOL_GPL(adis_check_status);
+
+/**
+ * adis_reset() - Reset the device
+ * @adis: The adis device
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+int adis_reset(struct adis *adis)
+{
+	int ret;
+
+	ret = adis_write_reg_8(adis, adis->data->glob_cmd_reg,
+			ADIS_GLOB_CMD_SW_RESET);
+	if (ret)
+		dev_err(&adis->spi->dev, "Failed to reset device: %d\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adis_reset);
+
+static int adis_self_test(struct adis *adis)
+{
+	int ret;
+
+	ret = adis_write_reg_16(adis, adis->data->msc_ctrl_reg,
+			adis->data->self_test_mask);
+	if (ret) {
+		dev_err(&adis->spi->dev, "Failed to initiate self test: %d\n",
+			ret);
+		return ret;
+	}
+
+	msleep(adis->data->startup_delay);
+
+	return adis_check_status(adis);
+}
+
+/**
+ * adis_inital_startup() - Performs device self-test
+ * @adis: The adis device
+ *
+ * Returns 0 if the device is operational, a negative error code otherwise.
+ *
+ * This function should be called early on in the device initialization sequence
+ * to ensure that the device is in a sane and known state and that it is usable.
+ */
+int adis_initial_startup(struct adis *adis)
+{
+	int ret;
+
+	ret = adis_self_test(adis);
+	if (ret) {
+		dev_err(&adis->spi->dev, "Self-test failed, trying reset.\n");
+		adis_reset(adis);
+		msleep(adis->data->startup_delay);
+		ret = adis_self_test(adis);
+		if (ret) {
+			dev_err(&adis->spi->dev, "Second self-test failed, giving up.\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(adis_initial_startup);
+
+/**
+ * adis_single_conversion() - Performs a single sample conversion
+ * @indio_dev: The IIO device
+ * @chan: The IIO channel
+ * @error_mask: Mask for the error bit
+ * @val: Result of the conversion
+ *
+ * Returns IIO_VAL_INT on success, a negative error code otherwise.
+ *
+ * The function performs a single conversion on a given channel and post
+ * processes the value accordingly to the channel spec. If a error_mask is given
+ * the function will check if the mask is set in the returned raw value. If it
+ * is set the function will perform a self-check. If the device does not report
+ * a error bit in the channels raw value set error_mask to 0.
+ */
+int adis_single_conversion(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, unsigned int error_mask, int *val)
+{
+	struct adis *adis = iio_device_get_drvdata(indio_dev);
+	uint16_t val16;
+	int ret;
+
+	mutex_lock(&indio_dev->mlock);
+
+	ret = adis_read_reg_16(adis, chan->address, &val16);
+	if (ret)
+		goto err_unlock;
+
+	if (val16 & error_mask) {
+		ret = adis_check_status(adis);
+		if (ret)
+			goto err_unlock;
+	}
+
+	if (chan->scan_type.sign == 's')
+		*val = sign_extend32(val16, chan->scan_type.realbits - 1);
+	else
+		*val = val16 & ((1 << chan->scan_type.realbits) - 1);
+
+	ret = IIO_VAL_INT;
+err_unlock:
+	mutex_unlock(&indio_dev->mlock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adis_single_conversion);
+
+/**
+ * adis_init() - Initialize adis device structure
+ * @adis:	The adis device
+ * @indio_dev:	The iio device
+ * @spi:	The spi device
+ * @data:	Chip specific data
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function must be called, before any other adis helper function may be
+ * called.
+ */
+int adis_init(struct adis *adis, struct iio_dev *indio_dev,
+	struct spi_device *spi, const struct adis_data *data)
+{
+	mutex_init(&adis->txrx_lock);
+	adis->spi = spi;
+	adis->data = data;
+	iio_device_set_drvdata(indio_dev, adis);
+
+	return adis_enable_irq(adis, false);
+}
+EXPORT_SYMBOL_GPL(adis_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Common library code for ADIS16XXX devices");
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
new file mode 100644
index 00000000000..a91b4cbdc73
--- /dev/null
+++ b/drivers/iio/imu/adis_buffer.c
@@ -0,0 +1,159 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/imu/adis.h>
+
+int adis_update_scan_mode(struct iio_dev *indio_dev,
+	const unsigned long *scan_mask)
+{
+	struct adis *adis = iio_device_get_drvdata(indio_dev);
+	const struct iio_chan_spec *chan;
+	unsigned int scan_count;
+	unsigned int i, j;
+	__be16 *tx, *rx;
+
+	kfree(adis->xfer);
+	kfree(adis->buffer);
+
+	scan_count = indio_dev->scan_bytes / 2;
+
+	adis->xfer = kcalloc(scan_count + 1, sizeof(*adis->xfer), GFP_KERNEL);
+	if (!adis->xfer)
+		return -ENOMEM;
+
+	adis->buffer = kzalloc(indio_dev->scan_bytes * 2, GFP_KERNEL);
+	if (!adis->buffer)
+		return -ENOMEM;
+
+	rx = adis->buffer;
+	tx = rx + indio_dev->scan_bytes;
+
+	spi_message_init(&adis->msg);
+
+	for (j = 0; j <= scan_count; j++) {
+		adis->xfer[j].bits_per_word = 8;
+		if (j != scan_count)
+			adis->xfer[j].cs_change = 1;
+		adis->xfer[j].len = 2;
+		adis->xfer[j].delay_usecs = adis->data->read_delay;
+		if (j < scan_count)
+			adis->xfer[j].tx_buf = &tx[j];
+		if (j >= 1)
+			adis->xfer[j].rx_buf = &rx[j - 1];
+		spi_message_add_tail(&adis->xfer[j], &adis->msg);
+	}
+
+	chan = indio_dev->channels;
+	for (i = 0; i < indio_dev->num_channels; i++, chan++) {
+		if (!test_bit(chan->scan_index, scan_mask))
+			continue;
+		*tx++ = cpu_to_be16(chan->address << 8);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(adis_update_scan_mode);
+
+static irqreturn_t adis_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adis *adis = iio_device_get_drvdata(indio_dev);
+	int ret;
+
+	if (!adis->buffer)
+		return -ENOMEM;
+
+	ret = spi_sync(adis->spi, &adis->msg);
+	if (ret)
+		dev_err(&adis->spi->dev, "Failed to read data: %d", ret);
+
+	/* Guaranteed to be aligned with 8 byte boundary */
+	if (indio_dev->scan_timestamp) {
+		void *b = adis->buffer + indio_dev->scan_bytes - sizeof(s64);
+		*(s64 *)b = pf->timestamp;
+	}
+
+	iio_push_to_buffers(indio_dev, adis->buffer);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * adis_setup_buffer_and_trigger() - Sets up buffer and trigger for the adis device
+ * @adis: The adis device.
+ * @indio_dev: The IIO device.
+ * @trigger_handler: Optional trigger handler, may be NULL.
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function sets up the buffer and trigger for a adis devices.  If
+ * 'trigger_handler' is NULL the default trigger handler will be used. The
+ * default trigger handler will simply read the registers assigned to the
+ * currently active channels.
+ *
+ * adis_cleanup_buffer_and_trigger() should be called to free the resources
+ * allocated by this function.
+ */
+int adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
+	irqreturn_t (*trigger_handler)(int, void *))
+{
+	int ret;
+
+	if (!trigger_handler)
+		trigger_handler = adis_trigger_handler;
+
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	if (adis->spi->irq) {
+		ret = adis_probe_trigger(adis, indio_dev);
+		if (ret)
+			goto error_buffer_cleanup;
+	}
+	return 0;
+
+error_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adis_setup_buffer_and_trigger);
+
+/**
+ * adis_cleanup_buffer_and_trigger() - Free buffer and trigger resources
+ * @adis: The adis device.
+ * @indio_dev: The IIO device.
+ *
+ * Frees resources allocated by adis_setup_buffer_and_trigger()
+ */
+void adis_cleanup_buffer_and_trigger(struct adis *adis,
+	struct iio_dev *indio_dev)
+{
+	if (adis->spi->irq)
+		adis_remove_trigger(adis);
+	kfree(adis->buffer);
+	kfree(adis->xfer);
+	iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL_GPL(adis_cleanup_buffer_and_trigger);
diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
new file mode 100644
index 00000000000..5a24c9cac34
--- /dev/null
+++ b/drivers/iio/imu/adis_trigger.c
@@ -0,0 +1,89 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/export.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/imu/adis.h>
+
+static int adis_data_rdy_trigger_set_state(struct iio_trigger *trig,
+						bool state)
+{
+	struct adis *adis = trig->private_data;
+
+	return adis_enable_irq(adis, state);
+}
+
+static const struct iio_trigger_ops adis_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = &adis_data_rdy_trigger_set_state,
+};
+
+/**
+ * adis_probe_trigger() - Sets up trigger for a adis device
+ * @adis: The adis device
+ * @indio_dev: The IIO device
+ *
+ * Returns 0 on success or a negative error code
+ *
+ * adis_remove_trigger() should be used to free the trigger.
+ */
+int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
+{
+	int ret;
+
+	adis->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name,
+					indio_dev->id);
+	if (adis->trig == NULL)
+		return -ENOMEM;
+
+	ret = request_irq(adis->spi->irq,
+			  &iio_trigger_generic_data_rdy_poll,
+			  IRQF_TRIGGER_RISING,
+			  indio_dev->name,
+			  adis->trig);
+	if (ret)
+		goto error_free_trig;
+
+	adis->trig->dev.parent = &adis->spi->dev;
+	adis->trig->ops = &adis_trigger_ops;
+	adis->trig->private_data = adis;
+	ret = iio_trigger_register(adis->trig);
+
+	indio_dev->trig = adis->trig;
+	if (ret)
+		goto error_free_irq;
+
+	return 0;
+
+error_free_irq:
+	free_irq(adis->spi->irq, adis->trig);
+error_free_trig:
+	iio_trigger_free(adis->trig);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adis_probe_trigger);
+
+/**
+ * adis_remove_trigger() - Remove trigger for a adis devices
+ * @adis: The adis device
+ *
+ * Removes the trigger previously registered with adis_probe_trigger().
+ */
+void adis_remove_trigger(struct adis *adis)
+{
+	iio_trigger_unregister(adis->trig);
+	free_irq(adis->spi->irq, adis->trig);
+	iio_trigger_free(adis->trig);
+}
+EXPORT_SYMBOL_GPL(adis_remove_trigger);