Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 215 insertions, 0 deletions

diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h
new file mode 100644
index 00000000000..739e76840d5
--- /dev/null
+++ b/drivers/ieee1394/hosts.h
@@ -0,0 +1,215 @@
+#ifndef _IEEE1394_HOSTS_H
+#define _IEEE1394_HOSTS_H
+
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/skbuff.h>
+
+#include <asm/semaphore.h>
+
+#include "ieee1394_types.h"
+#include "csr.h"
+
+
+struct hpsb_packet;
+struct hpsb_iso;
+
+struct hpsb_host {
+        struct list_head host_list;
+
+        void *hostdata;
+
+        atomic_t generation;
+
+	struct sk_buff_head pending_packet_queue;
+
+	struct timer_list timeout;
+	unsigned long timeout_interval;
+
+        unsigned char iso_listen_count[64];
+
+        int node_count; /* number of identified nodes on this bus */
+        int selfid_count; /* total number of SelfIDs received */
+	int nodes_active; /* number of nodes that are actually active */
+
+        nodeid_t node_id; /* node ID of this host */
+        nodeid_t irm_id; /* ID of this bus' isochronous resource manager */
+        nodeid_t busmgr_id; /* ID of this bus' bus manager */
+
+        /* this nodes state */
+        unsigned in_bus_reset:1;
+        unsigned is_shutdown:1;
+
+        /* this nodes' duties on the bus */
+        unsigned is_root:1;
+        unsigned is_cycmst:1;
+        unsigned is_irm:1;
+        unsigned is_busmgr:1;
+
+        int reset_retries;
+        quadlet_t *topology_map;
+        u8 *speed_map;
+        struct csr_control csr;
+
+	/* Per node tlabel pool allocation */
+	struct hpsb_tlabel_pool tpool[64];
+
+        struct hpsb_host_driver *driver;
+
+	struct pci_dev *pdev;
+
+	int id;
+
+	struct device device;
+	struct class_device class_dev;
+
+	int update_config_rom;
+	struct work_struct delayed_reset;
+
+	unsigned int config_roms;
+
+	struct list_head addr_space;
+};
+
+
+
+enum devctl_cmd {
+        /* Host is requested to reset its bus and cancel all outstanding async
+         * requests.  If arg == 1, it shall also attempt to become root on the
+         * bus.  Return void. */
+        RESET_BUS,
+
+        /* Arg is void, return value is the hardware cycle counter value. */
+        GET_CYCLE_COUNTER,
+
+        /* Set the hardware cycle counter to the value in arg, return void.
+         * FIXME - setting is probably not required. */
+        SET_CYCLE_COUNTER,
+
+        /* Configure hardware for new bus ID in arg, return void. */
+        SET_BUS_ID,
+
+        /* If arg true, start sending cycle start packets, stop if arg == 0.
+         * Return void. */
+        ACT_CYCLE_MASTER,
+
+        /* Cancel all outstanding async requests without resetting the bus.
+         * Return void. */
+        CANCEL_REQUESTS,
+
+        /* Start or stop receiving isochronous channel in arg.  Return void.
+         * This acts as an optimization hint, hosts are not required not to
+         * listen on unrequested channels. */
+        ISO_LISTEN_CHANNEL,
+        ISO_UNLISTEN_CHANNEL
+};
+
+enum isoctl_cmd {
+	/* rawiso API - see iso.h for the meanings of these commands
+	   (they correspond exactly to the hpsb_iso_* API functions)
+	 * INIT = allocate resources
+	 * START = begin transmission/reception
+	 * STOP = halt transmission/reception
+	 * QUEUE/RELEASE = produce/consume packets
+	 * SHUTDOWN = deallocate resources
+	 */
+
+	XMIT_INIT,
+	XMIT_START,
+	XMIT_STOP,
+	XMIT_QUEUE,
+	XMIT_SHUTDOWN,
+
+	RECV_INIT,
+	RECV_LISTEN_CHANNEL,   /* multi-channel only */
+	RECV_UNLISTEN_CHANNEL, /* multi-channel only */
+	RECV_SET_CHANNEL_MASK, /* multi-channel only; arg is a *u64 */
+	RECV_START,
+	RECV_STOP,
+	RECV_RELEASE,
+	RECV_SHUTDOWN,
+	RECV_FLUSH
+};
+
+enum reset_types {
+        /* 166 microsecond reset -- only type of reset available on
+           non-1394a capable IEEE 1394 controllers */
+        LONG_RESET,
+
+        /* Short (arbitrated) reset -- only available on 1394a capable
+           IEEE 1394 capable controllers */
+        SHORT_RESET,
+
+	/* Variants, that set force_root before issueing the bus reset */
+	LONG_RESET_FORCE_ROOT, SHORT_RESET_FORCE_ROOT,
+
+	/* Variants, that clear force_root before issueing the bus reset */
+	LONG_RESET_NO_FORCE_ROOT, SHORT_RESET_NO_FORCE_ROOT
+};
+
+struct hpsb_host_driver {
+	struct module *owner;
+	const char *name;
+
+	/* The hardware driver may optionally support a function that is used
+	 * to set the hardware ConfigROM if the hardware supports handling
+	 * reads to the ConfigROM on its own. */
+	void (*set_hw_config_rom) (struct hpsb_host *host, quadlet_t *config_rom);
+
+        /* This function shall implement packet transmission based on
+         * packet->type.  It shall CRC both parts of the packet (unless
+         * packet->type == raw) and do byte-swapping as necessary or instruct
+         * the hardware to do so.  It can return immediately after the packet
+         * was queued for sending.  After sending, hpsb_sent_packet() has to be
+         * called.  Return 0 on success, negative errno on failure.
+         * NOTE: The function must be callable in interrupt context.
+         */
+        int (*transmit_packet) (struct hpsb_host *host,
+                                struct hpsb_packet *packet);
+
+        /* This function requests miscellanous services from the driver, see
+         * above for command codes and expected actions.  Return -1 for unknown
+         * command, though that should never happen.
+         */
+        int (*devctl) (struct hpsb_host *host, enum devctl_cmd command, int arg);
+
+	 /* ISO transmission/reception functions. Return 0 on success, -1
+	  * (or -EXXX errno code) on failure. If the low-level driver does not
+	  * support the new ISO API, set isoctl to NULL.
+	  */
+	int (*isoctl) (struct hpsb_iso *iso, enum isoctl_cmd command, unsigned long arg);
+
+        /* This function is mainly to redirect local CSR reads/locks to the iso
+         * management registers (bus manager id, bandwidth available, channels
+         * available) to the hardware registers in OHCI.  reg is 0,1,2,3 for bus
+         * mgr, bwdth avail, ch avail hi, ch avail lo respectively (the same ids
+         * as OHCI uses).  data and compare are the new data and expected data
+         * respectively, return value is the old value.
+         */
+        quadlet_t (*hw_csr_reg) (struct hpsb_host *host, int reg,
+                                 quadlet_t data, quadlet_t compare);
+};
+
+
+struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
+				  struct device *dev);
+int hpsb_add_host(struct hpsb_host *host);
+void hpsb_remove_host(struct hpsb_host *h);
+
+/* The following 2 functions are deprecated and will be removed when the
+ * raw1394/libraw1394 update is complete. */
+int hpsb_update_config_rom(struct hpsb_host *host,
+      const quadlet_t *new_rom, size_t size, unsigned char rom_version);
+int hpsb_get_config_rom(struct hpsb_host *host, quadlet_t *buffer,
+      size_t buffersize, size_t *rom_size, unsigned char *rom_version);
+
+/* Updates the configuration rom image of a host.  rom_version must be the
+ * current version, otherwise it will fail with return value -1. If this
+ * host does not support config-rom-update, it will return -EINVAL.
+ * Return value 0 indicates success.
+ */
+int hpsb_update_config_rom_image(struct hpsb_host *host);
+
+#endif /* _IEEE1394_HOSTS_H */