ide: remove ->init_setup_dma from ide_pci_device_t (take 2)

* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag.

* Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base()
  and use d->name instead of hwif->cds->name.

* Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in
  ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer
  needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma.

  This fixes PCI bus-mastering not being checked for CS5510/CS5520 hosts.

v2:
* It is wrong to check simplex bits on CS5510/CS5520 as v1 did.
  (Noticed by Alan).

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 16 insertions, 19 deletions

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 26061fe1b71..479add4af49 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -147,6 +147,7 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 /**
  *	ide_get_or_set_dma_base		-	setup BMIBA
+ *	@d: IDE pci device data
  *	@hwif: Interface
  *
  *	Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
@@ -154,7 +155,7 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
  *	and enforce IDE simplex rules.
  */
 
-static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
+static unsigned long ide_get_or_set_dma_base(ide_pci_device_t *d, ide_hwif_t *hwif)
 {
 	unsigned long	dma_base = 0;
 	struct pci_dev	*dev = hwif->pci_dev;
@@ -165,14 +166,15 @@ static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
 	if (hwif->mate && hwif->mate->dma_base) {
 		dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
 	} else {
-		dma_base = pci_resource_start(dev, 4);
-		if (!dma_base) {
-			printk(KERN_ERR "%s: dma_base is invalid\n",
-					hwif->cds->name);
-		}
+		u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4;
+
+		dma_base = pci_resource_start(dev, baridx);
+
+		if (dma_base == 0)
+			printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
 	}
 
-	if (dma_base) {
+	if ((d->host_flags & IDE_HFLAG_CS5520) == 0 && dma_base) {
 		u8 simplex_stat = 0;
 		dma_base += hwif->channel ? 8 : 0;
 
@@ -188,8 +190,8 @@ static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
 				simplex_stat = hwif->INB(dma_base + 2);
 				if (simplex_stat & 0x80) {
 					printk(KERN_INFO "%s: simplex device: "
-						"DMA forced\n",
-						hwif->cds->name);
+							 "DMA forced\n",
+							 d->name);
 				}
 				break;
 			default:
@@ -212,8 +214,8 @@ static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
  */
 					if (hwif->mate && hwif->mate->dma_base) {
 						printk(KERN_INFO "%s: simplex device: "
-							"DMA disabled\n",
-							hwif->cds->name);
+								 "DMA disabled\n",
+								 d->name);
 						dma_base = 0;
 					}
 				}
@@ -434,7 +436,7 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwi
 	if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
 	    ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
 	     (dev->class & 0x80))) {
-		unsigned long dma_base = ide_get_or_set_dma_base(hwif);
+		unsigned long dma_base = ide_get_or_set_dma_base(d, hwif);
 		if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) {
 			/*
  			 * Set up BM-DMA capability
@@ -559,14 +561,9 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
 		if (d->init_iops)
 			d->init_iops(hwif);
 
-		if (d->host_flags & IDE_HFLAG_NO_DMA)
-			goto bypass_legacy_dma;
-
-		if(d->init_setup_dma)
-			d->init_setup_dma(dev, d, hwif);
-		else
+		if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
 			ide_hwif_setup_dma(dev, d, hwif);
-bypass_legacy_dma:
+
 		hwif->host_flags = d->host_flags;
 		hwif->pio_mask = d->pio_mask;