ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 248 deletions

diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
deleted file mode 100644
index 90da1f953ed..00000000000
--- a/drivers/ide/legacy/ali14xx.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- *  Copyright (C) 1996  Linus Torvalds & author (see below)
- */
-
-/*
- * ALI M14xx chipset EIDE controller
- *
- * Works for ALI M1439/1443/1445/1487/1489 chipsets.
- *
- * Adapted from code developed by derekn@vw.ece.cmu.edu.  -ml
- * Derek's notes follow:
- *
- * I think the code should be pretty understandable,
- * but I'll be happy to (try to) answer questions.
- *
- * The critical part is in the setupDrive function.  The initRegisters
- * function doesn't seem to be necessary, but the DOS driver does it, so
- * I threw it in.
- *
- * I've only tested this on my system, which only has one disk.  I posted
- * it to comp.sys.linux.hardware, so maybe some other people will try it
- * out.
- *
- * Derek Noonburg  (derekn@ece.cmu.edu)
- * 95-sep-26
- *
- * Update 96-jul-13:
- *
- * I've since upgraded to two disks and a CD-ROM, with no trouble, and
- * I've also heard from several others who have used it successfully.
- * This driver appears to work with both the 1443/1445 and the 1487/1489
- * chipsets.  I've added support for PIO mode 4 for the 1487.  This
- * seems to work just fine on the 1443 also, although I'm not sure it's
- * advertised as supporting mode 4.  (I've been running a WDC AC21200 in
- * mode 4 for a while now with no trouble.)  -Derek
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "ali14xx"
-
-/* port addresses for auto-detection */
-#define ALI_NUM_PORTS 4
-static const int ports[ALI_NUM_PORTS] __initdata =
-	{ 0x074, 0x0f4, 0x034, 0x0e4 };
-
-/* register initialization data */
-typedef struct { u8 reg, data; } RegInitializer;
-
-static const RegInitializer initData[] __initdata = {
-	{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
-	{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
-	{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
-	{0x29, 0x00}, {0x2a, 0x00}, {0x2f, 0x00}, {0x2b, 0x00},
-	{0x2c, 0x00}, {0x2d, 0x00}, {0x2e, 0x00}, {0x30, 0x00},
-	{0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00}, {0x34, 0xff},
-	{0x35, 0x03}, {0x00, 0x00}
-};
-
-/* timing parameter registers for each drive */
-static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
-	{0x03, 0x26, 0x04, 0x27},     /* drive 0 */
-	{0x05, 0x28, 0x06, 0x29},     /* drive 1 */
-	{0x2b, 0x30, 0x2c, 0x31},     /* drive 2 */
-	{0x2d, 0x32, 0x2e, 0x33},     /* drive 3 */
-};
-
-static int basePort;	/* base port address */
-static int regPort;	/* port for register number */
-static int dataPort;	/* port for register data */
-static u8 regOn;	/* output to base port to access registers */
-static u8 regOff;	/* output to base port to close registers */
-
-/*------------------------------------------------------------------------*/
-
-/*
- * Read a controller register.
- */
-static inline u8 inReg(u8 reg)
-{
-	outb_p(reg, regPort);
-	return inb(dataPort);
-}
-
-/*
- * Write a controller register.
- */
-static void outReg(u8 data, u8 reg)
-{
-	outb_p(reg, regPort);
-	outb_p(data, dataPort);
-}
-
-static DEFINE_SPINLOCK(ali14xx_lock);
-
-/*
- * Set PIO mode for the specified drive.
- * This function computes timing parameters
- * and sets controller registers accordingly.
- */
-static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	int driveNum;
-	int time1, time2;
-	u8 param1, param2, param3, param4;
-	unsigned long flags;
-	int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
-	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-
-	/* calculate timing, according to PIO mode */
-	time1 = ide_pio_cycle_time(drive, pio);
-	time2 = t->active;
-	param3 = param1 = (time2 * bus_speed + 999) / 1000;
-	param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
-	if (pio < 3) {
-		param3 += 8;
-		param4 += 8;
-	}
-	printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
-		drive->name, pio, time1, time2, param1, param2, param3, param4);
-
-	/* stuff timing parameters into controller registers */
-	driveNum = (drive->hwif->index << 1) + (drive->dn & 1);
-	spin_lock_irqsave(&ali14xx_lock, flags);
-	outb_p(regOn, basePort);
-	outReg(param1, regTab[driveNum].reg1);
-	outReg(param2, regTab[driveNum].reg2);
-	outReg(param3, regTab[driveNum].reg3);
-	outReg(param4, regTab[driveNum].reg4);
-	outb_p(regOff, basePort);
-	spin_unlock_irqrestore(&ali14xx_lock, flags);
-}
-
-/*
- * Auto-detect the IDE controller port.
- */
-static int __init findPort(void)
-{
-	int i;
-	u8 t;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (i = 0; i < ALI_NUM_PORTS; ++i) {
-		basePort = ports[i];
-		regOff = inb(basePort);
-		for (regOn = 0x30; regOn <= 0x33; ++regOn) {
-			outb_p(regOn, basePort);
-			if (inb(basePort) == regOn) {
-				regPort = basePort + 4;
-				dataPort = basePort + 8;
-				t = inReg(0) & 0xf0;
-				outb_p(regOff, basePort);
-				local_irq_restore(flags);
-				if (t != 0x50)
-					return 0;
-				return 1;  /* success */
-			}
-		}
-		outb_p(regOff, basePort);
-	}
-	local_irq_restore(flags);
-	return 0;
-}
-
-/*
- * Initialize controller registers with default values.
- */
-static int __init initRegisters(void)
-{
-	const RegInitializer *p;
-	u8 t;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb_p(regOn, basePort);
-	for (p = initData; p->reg != 0; ++p)
-		outReg(p->data, p->reg);
-	outb_p(0x01, regPort);
-	t = inb(regPort) & 0x01;
-	outb_p(regOff, basePort);
-	local_irq_restore(flags);
-	return t;
-}
-
-static const struct ide_port_ops ali14xx_port_ops = {
-	.set_pio_mode		= ali14xx_set_pio_mode,
-};
-
-static const struct ide_port_info ali14xx_port_info = {
-	.name			= DRV_NAME,
-	.chipset		= ide_ali14xx,
-	.port_ops		= &ali14xx_port_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
-	.pio_mask		= ATA_PIO4,
-};
-
-static int __init ali14xx_probe(void)
-{
-	printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
-			  basePort, regOn);
-
-	/* initialize controller registers */
-	if (!initRegisters()) {
-		printk(KERN_ERR "ali14xx: Chip initialization failed.\n");
-		return 1;
-	}
-
-	return ide_legacy_device_add(&ali14xx_port_info, 0);
-}
-
-static int probe_ali14xx;
-
-module_param_named(probe, probe_ali14xx, bool, 0);
-MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
-
-static int __init ali14xx_init(void)
-{
-	if (probe_ali14xx == 0)
-		goto out;
-
-	/* auto-detect IDE controller port */
-	if (findPort()) {
-		if (ali14xx_probe())
-			return -ENODEV;
-		return 0;
-	}
-	printk(KERN_ERR "ali14xx: not found.\n");
-out:
-	return -ENODEV;
-}
-
-module_init(ali14xx_init);
-
-MODULE_AUTHOR("see local file");
-MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets");
-MODULE_LICENSE("GPL");