diff options
| author | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2012-11-21 13:12:11 +0900 |
|---|---|---|
| committer | Wolfram Sang <w.sang@pengutronix.de> | 2012-11-22 22:34:40 +0100 |
| commit | 31f313d9bebfc17e48c787c8c36b38662b4134a1 (patch) | |
| tree | 7fcd40d17bac586a95ae21ed9f54fa0e642b4711 /drivers/i2c | |
| parent | c5d5474425c4e7e291a98e739ea65f8acd0d8d5c (diff) | |
i2c: s3c2410: Remove recently introduced performance overheads
The changes in "i2c-s3c2410: use exponential back off while polling for
bus idle" remove the initial busy wait for I2C transfers to complete and
replace it with usleep_range() calls which will schedule.
Since for older SoCs I2C transfers would usually complete within an
extremely small number of CPU cycles there is a win from not having to
schedule. This happens because on the older SoCs the cores run at a
smaller multiple of the speeds that the I2C bus is operating at; on more
modern SoCs the busy wait is less likely to be effective.
Fix the issue by restoring the busy wait, reducing the number of spins
from 20 to 3 which covers the overwhelming majority of I2C transfers on
the SoCs where the busy wait is effective.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 20 |
1 files changed, 16 insertions, 4 deletions
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index d784c76ae3e..e93e7d67277 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -554,6 +554,7 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c) unsigned long iicstat; ktime_t start, now; unsigned long delay; + int spins; /* ensure the stop has been through the bus */ @@ -566,12 +567,23 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c) * end of a transaction. However, really slow i2c devices can stretch * the clock, delaying STOP generation. * - * As a compromise between idle detection latency for the normal, fast - * case, and system load in the slow device case, use an exponential - * back off in the polling loop, up to 1/10th of the total timeout, - * then continue to poll at a constant rate up to the timeout. + * On slower SoCs this typically happens within a very small number of + * instructions so busy wait briefly to avoid scheduling overhead. */ + spins = 3; iicstat = readl(i2c->regs + S3C2410_IICSTAT); + while ((iicstat & S3C2410_IICSTAT_START) && --spins) { + cpu_relax(); + iicstat = readl(i2c->regs + S3C2410_IICSTAT); + } + + /* + * If we do get an appreciable delay as a compromise between idle + * detection latency for the normal, fast case, and system load in the + * slow device case, use an exponential back off in the polling loop, + * up to 1/10th of the total timeout, then continue to poll at a + * constant rate up to the timeout. + */ delay = 1; while ((iicstat & S3C2410_IICSTAT_START) && ktime_us_delta(now, start) < S3C2410_IDLE_TIMEOUT) { |