Merge branch 'master' into gfs2

57 files changed, 1174 insertions, 418 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 24383afdda7..11935f66fcd 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -1,5 +1,5 @@
 #
-# Character device configuration
+# I2C subsystem configuration
 #
 
 menu "I2C support"
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 30408015d23..c034820615b 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -53,12 +53,6 @@ config I2C_ALGO8XX
 	tristate "MPC8xx CPM I2C interface"
 	depends on 8xx && I2C
 
-config I2C_ALGO_SIBYTE
-	tristate "SiByte SMBus interface"
-	depends on SIBYTE_SB1xxx_SOC && I2C
-	help
-	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
-
 config I2C_ALGO_SGI
 	tristate "I2C SGI interfaces"
 	depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index 867fe1f6740..208be04a3db 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
 obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
 obj-$(CONFIG_I2C_ALGOPCA)	+= i2c-algo-pca.o
 obj-$(CONFIG_I2C_ALGOITE)	+= i2c-algo-ite.o
-obj-$(CONFIG_I2C_ALGO_SIBYTE)	+= i2c-algo-sibyte.o
 obj-$(CONFIG_I2C_ALGO_SGI)	+= i2c-algo-sgi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index ab230c033f9..21c36bfb5e6 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -76,17 +76,15 @@ static inline void scllo(struct i2c_algo_bit_data *adap)
  * Raise scl line, and do checking for delays. This is necessary for slower
  * devices.
  */
-static inline int sclhi(struct i2c_algo_bit_data *adap)
+static int sclhi(struct i2c_algo_bit_data *adap)
 {
 	unsigned long start;
 
 	setscl(adap,1);
 
 	/* Not all adapters have scl sense line... */
-	if (adap->getscl == NULL ) {
-		udelay(adap->udelay);
-		return 0;
-	}
+	if (!adap->getscl)
+		goto done;
 
 	start=jiffies;
 	while (! getscl(adap) ) {	
@@ -101,6 +99,8 @@ static inline int sclhi(struct i2c_algo_bit_data *adap)
 		cond_resched();
 	}
 	DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start));
+
+done:
 	udelay(adap->udelay);
 	return 0;
 } 
@@ -121,7 +121,6 @@ static void i2c_repstart(struct i2c_algo_bit_data *adap)
 	DEBPROTO(printk(" Sr "));
 	setsda(adap,1);
 	sclhi(adap);
-	udelay(adap->udelay);
 	
 	sdalo(adap);
 	scllo(adap);
@@ -306,7 +305,7 @@ bailout:
  * 0 chip did not answer
  * -x transmission error
  */
-static inline int try_address(struct i2c_adapter *i2c_adap,
+static int try_address(struct i2c_adapter *i2c_adap,
 		       unsigned char addr, int retries)
 {
 	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
@@ -354,15 +353,11 @@ static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 			return (retval<0)? retval : -EFAULT;
 			        /* got a better one ?? */
 		}
-#if 0
-		/* from asm/delay.h */
-		__delay(adap->mdelay * (loops_per_sec / 1000) );
-#endif
 	}
 	return wrcount;
 }
 
-static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
+static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 {
 	int inval;
 	int rdcount=0;   	/* counts bytes read */
@@ -412,7 +407,7 @@ static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
  * -x an error occurred (like: -EREMOTEIO if the device did not answer, or
  *	-ETIMEDOUT, for example if the lines are stuck...) 
  */
-static inline int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) 
+static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 {
 	unsigned short flags = msg->flags;
 	unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
@@ -517,7 +512,7 @@ static u32 bit_func(struct i2c_adapter *adap)
 
 /* -----exported algorithm data: -------------------------------------	*/
 
-static struct i2c_algorithm i2c_bit_algo = {
+static const struct i2c_algorithm i2c_bit_algo = {
 	.master_xfer	= bit_xfer,
 	.functionality	= bit_func,
 };
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index b88a6fcf7bd..9081c9fbcd2 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -355,7 +355,7 @@ static int pca_init(struct i2c_algo_pca_data *adap)
 	return 0;
 }
 
-static struct i2c_algorithm pca_algo = {
+static const struct i2c_algorithm pca_algo = {
 	.master_xfer	= pca_xfer,
 	.functionality	= pca_func,
 };
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 5b24930adb5..3b200339896 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -458,7 +458,7 @@ static u32 pcf_func(struct i2c_adapter *adap)
 
 /* -----exported algorithm data: -------------------------------------	*/
 
-static struct i2c_algorithm pcf_algo = {
+static const struct i2c_algorithm pcf_algo = {
 	.master_xfer	= pcf_xfer,
 	.functionality	= pcf_func,
 };
diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c
index 932c4fa86c7..490d99997fd 100644
--- a/drivers/i2c/algos/i2c-algo-sgi.c
+++ b/drivers/i2c/algos/i2c-algo-sgi.c
@@ -157,7 +157,7 @@ static u32 sgi_func(struct i2c_adapter *adap)
 	return I2C_FUNC_SMBUS_EMUL;
 }
 
-static struct i2c_algorithm sgi_algo = {
+static const struct i2c_algorithm sgi_algo = {
 	.master_xfer	= sgi_xfer,
 	.functionality	= sgi_func,
 };
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
deleted file mode 100644
index 32d41c6fac0..00000000000
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-sibyte.c i2c driver algorithms for bit-shift adapters		     */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 2001,2002,2003 Broadcom Corporation
-     Copyright (C) 1995-2000 Simon G. Vogl
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl>.  */
-
-/* Ported for SiByte SOCs by Broadcom Corporation.  */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_smbus.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-sibyte.h>
-
-/* ----- global defines ----------------------------------------------- */
-#define SMB_CSR(a,r) ((long)(a->reg_base + r))
-
-/* ----- global variables ---------------------------------------------	*/
-
-/* module parameters:
- */
-static int bit_scan;	/* have a look at what's hanging 'round		*/
-
-
-static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, 
-                      unsigned short flags, char read_write,
-                      u8 command, int size, union i2c_smbus_data * data)
-{
-	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
-        int data_bytes = 0;
-        int error;
-
-        while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
-
-        switch (size) {
-        case I2C_SMBUS_QUICK:
-                csr_out32((V_SMB_ADDR(addr) | (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
-			   V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
-                break;
-        case I2C_SMBUS_BYTE:
-                if (read_write == I2C_SMBUS_READ) {
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                        data_bytes = 1;
-                } else {
-                        csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                }
-                break;
-        case I2C_SMBUS_BYTE_DATA:
-                csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
-                if (read_write == I2C_SMBUS_READ) {
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                        data_bytes = 1;
-                } else {
-                        csr_out32(V_SMB_LB(data->byte), SMB_CSR(adap, R_SMB_DATA));
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                }
-                break;
-        case I2C_SMBUS_WORD_DATA:
-                csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
-                if (read_write == I2C_SMBUS_READ) {
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                        data_bytes = 2;
-                } else {
-                        csr_out32(V_SMB_LB(data->word & 0xff), SMB_CSR(adap, R_SMB_DATA));
-                        csr_out32(V_SMB_MB(data->word >> 8), SMB_CSR(adap, R_SMB_DATA));
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                }
-                break;
-        default:
-                return -1;      /* XXXKW better error code? */
-        }
-
-        while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
-
-        error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
-        if (error & M_SMB_ERROR) {
-                /* Clear error bit by writing a 1 */
-                csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
-                return -1;      /* XXXKW better error code? */
-        }
-
-        if (data_bytes == 1)
-                data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
-        if (data_bytes == 2)
-                data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
-
-        return 0;
-}
-
-static int algo_control(struct i2c_adapter *adapter, 
-	unsigned int cmd, unsigned long arg)
-{
-	return 0;
-}
-
-static u32 bit_func(struct i2c_adapter *adap)
-{
-	return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
-}
-
-
-/* -----exported algorithm data: -------------------------------------	*/
-
-static struct i2c_algorithm i2c_sibyte_algo = {
-	.smbus_xfer	= smbus_xfer,
-	.algo_control	= algo_control, /* ioctl */
-	.functionality	= bit_func,
-};
-
-/* 
- * registering functions to load algorithms at runtime 
- */
-int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
-{
-	int i;
-	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
-
-	/* register new adapter to i2c module... */
-	i2c_adap->algo = &i2c_sibyte_algo;
-        
-        /* Set the frequency to 100 kHz */
-        csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
-        csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
-
-	/* scan bus */
-	if (bit_scan) {
-                union i2c_smbus_data data;
-                int rc;
-		printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
-		       i2c_adap->name);
-		for (i = 0x00; i < 0x7f; i++) {
-                        /* XXXKW is this a realistic probe? */
-                        rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
-                                        I2C_SMBUS_BYTE_DATA, &data);
-			if (!rc) {
-				printk("(%02x)",i); 
-			} else 
-				printk("."); 
-		}
-		printk("\n");
-	}
-
-	return i2c_add_adapter(i2c_adap);
-}
-
-
-int i2c_sibyte_del_bus(struct i2c_adapter *adap)
-{
-	int res;
-
-	if ((res = i2c_del_adapter(adap)) < 0)
-		return res;
-
-	return 0;
-}
-
-int __init i2c_algo_sibyte_init (void)
-{
-	printk("i2c-algo-sibyte.o: i2c SiByte algorithm module\n");
-	return 0;
-}
-
-
-EXPORT_SYMBOL(i2c_sibyte_add_bus);
-EXPORT_SYMBOL(i2c_sibyte_del_bus);
-
-#ifdef MODULE
-MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
-MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
-module_param(bit_scan, int, 0);
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
-MODULE_LICENSE("GPL");
-
-int init_module(void) 
-{
-	return i2c_algo_sibyte_init();
-}
-
-void cleanup_module(void) 
-{
-}
-#endif
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 884320e7040..9e56c3989d6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -75,11 +75,11 @@ config I2C_AMD8111
 	  will be called i2c-amd8111.
 
 config I2C_AU1550
-	tristate "Au1550 SMBus interface"
-	depends on I2C && SOC_AU1550
+	tristate "Au1550/Au1200 SMBus interface"
+	depends on I2C && (SOC_AU1550 || SOC_AU1200)
 	help
 	  If you say yes to this option, support will be included for the
-	  Au1550 SMBus interface.
+	  Au1550 and Au1200 SMBus interface.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-au1550.
@@ -287,6 +287,16 @@ config I2C_OCORES
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-ocores.
 
+config I2C_OMAP
+	tristate "OMAP I2C adapter"
+	depends on I2C && ARCH_OMAP
+	default y if MACH_OMAP_H3 || MACH_OMAP_OSK
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the Texas Instruments OMAP1/2 family of processors.
+	  Like OMAP1510/1610/1710/5912 and OMAP242x.
+	  For details see http://www.ti.com/omap.
+
 config I2C_PARPORT
 	tristate "Parallel port adapter"
 	depends on I2C && PARPORT
@@ -482,19 +492,19 @@ config I2C_VIA
 	  will be called i2c-via.
 
 config I2C_VIAPRO
-	tristate "VIA 82C596/82C686/823x"
+	tristate "VIA 82C596/82C686/82xx"
 	depends on I2C && PCI
 	help
 	  If you say yes to this option, support will be included for the VIA
-	  82C596/82C686/823x I2C interfaces.  Specifically, the following 
+	  82C596/82C686/82xx I2C interfaces.  Specifically, the following
 	  chipsets are supported:
-	  82C596A/B
-	  82C686A/B
-	  8231
-	  8233
-	  8233A
-	  8235
-	  8237
+	    VT82C596A/B
+	    VT82C686A/B
+	    VT8231
+	    VT8233/A
+	    VT8235
+	    VT8237R/A
+	    VT8251
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index ac56df53155..493c87289b6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
+obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index d3ef46aeeb3..e75d339a348 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -468,7 +468,7 @@ static u32 ali1535_func(struct i2c_adapter *adapter)
 	    I2C_FUNC_SMBUS_BLOCK_DATA;
 }
 
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
 	.smbus_xfer	= ali1535_access,
 	.functionality	= ali1535_func,
 };
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index e6f63208fc4..33fbb47100a 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -367,7 +367,7 @@ static void ali1563_shutdown(struct pci_dev *dev)
 	release_region(ali1563_smba,ALI1563_SMB_IOSIZE);
 }
 
-static struct i2c_algorithm ali1563_algorithm = {
+static const struct i2c_algorithm ali1563_algorithm = {
 	.smbus_xfer	= ali1563_access,
 	.functionality	= ali1563_func,
 };
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 7a5c0941dbc..3f11b6e1a34 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -463,7 +463,7 @@ static u32 ali15x3_func(struct i2c_adapter *adapter)
 	    I2C_FUNC_SMBUS_BLOCK_DATA;
 }
 
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
 	.smbus_xfer	= ali15x3_access,
 	.functionality	= ali15x3_func,
 };
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 1750dedaf4b..2d21afdc5b1 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -294,7 +294,7 @@ static u32 amd756_func(struct i2c_adapter *adapter)
 	    I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL;
 }
 
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
 	.smbus_xfer	= amd756_access,
 	.functionality	= amd756_func,
 };
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index e5ef560e686..0fbc7186c91 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -316,7 +316,7 @@ static u32 amd8111_func(struct i2c_adapter *adapter)
 		I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC;
 }
 
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
 	.smbus_xfer = amd8111_access,
 	.functionality = amd8111_func,
 };
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index d06edce03bf..d7e7c359fc3 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -34,8 +34,7 @@
 #include <linux/errno.h>
 #include <linux/i2c.h>
 
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
 #include "i2c-au1550.h"
@@ -118,13 +117,19 @@ do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd)
 
 	/* Reset the FIFOs, clear events.
 	*/
-	sp->psc_smbpcr = PSC_SMBPCR_DC;
+	stat = sp->psc_smbstat;
 	sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
 	au_sync();
-	do {
-		stat = sp->psc_smbpcr;
+
+	if (!(stat & PSC_SMBSTAT_TE) || !(stat & PSC_SMBSTAT_RE)) {
+		sp->psc_smbpcr = PSC_SMBPCR_DC;
 		au_sync();
-	} while ((stat & PSC_SMBPCR_DC) != 0);
+		do {
+			stat = sp->psc_smbpcr;
+			au_sync();
+		} while ((stat & PSC_SMBPCR_DC) != 0);
+		udelay(50);
+	}
 
 	/* Write out the i2c chip address and specify operation
 	*/
@@ -279,10 +284,10 @@ au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 static u32
 au1550_func(struct i2c_adapter *adap)