Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6

51 files changed, 1149 insertions, 491 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index beb10edfe9c..82946acab4c 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -34,7 +34,7 @@
 #define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0)
 #define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0)
 
-static int i2c_debug=0;
+static int i2c_debug;
 
 #define pca_outw(adap, reg, val) adap->write_byte(adap, reg, val)
 #define pca_inw(adap, reg) adap->read_byte(adap, reg)
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 8ed5ad12552..938848ae162 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -42,7 +42,7 @@
 
 /* module parameters:
  */
-static int bit_scan=0;	/* have a look at what's hanging 'round		*/
+static int bit_scan;	/* have a look at what's hanging 'round		*/
 
 
 static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 3badfec75b1..4010fe92e72 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -135,11 +135,12 @@ config I2C_I810
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  810/815 family of mainboard I2C interfaces.  Specifically, the 
-	  following versions of the chipset is supported:
+	  following versions of the chipset are supported:
 	    i810AA
 	    i810AB
 	    i810E
 	    i815
+	    i845G
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i810.
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index f021acd2674..ba90f5140af 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -134,7 +134,7 @@
 					/*  -> Read  = 1		*/
 #define	ALI1535_SMBIO_EN	0x04	/* SMB I/O Space enable		*/
 
-
+static struct pci_driver ali1535_driver;
 static unsigned short ali1535_smba;
 static DECLARE_MUTEX(i2c_ali1535_sem);
 
@@ -162,7 +162,8 @@ static int ali1535_setup(struct pci_dev *dev)
 		goto exit;
 	}
 
-	if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) {
+	if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+			    ali1535_driver.name)) {
 		dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
 			ali1535_smba);
 		goto exit;
@@ -480,7 +481,6 @@ static struct i2c_adapter ali1535_adapter = {
 	.owner		= THIS_MODULE,
 	.class          = I2C_CLASS_HWMON,
 	.algo		= &smbus_algorithm,
-	.name		= "unset",
 };
 
 static struct pci_device_id ali1535_ids[] = {
@@ -513,6 +513,7 @@ static void __devexit ali1535_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver ali1535_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "ali1535_smbus",
 	.id_table	= ali1535_ids,
 	.probe		= ali1535_probe,
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 86947504aea..f1a62d89242 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -60,6 +60,7 @@
 
 #define HST_CNTL2_SIZEMASK	0x38
 
+static struct pci_driver ali1563_pci_driver;
 static unsigned short ali1563_smba;
 
 static int ali1563_transaction(struct i2c_adapter * a, int size)
@@ -350,7 +351,8 @@ static int __devinit ali1563_setup(struct pci_dev * dev)
 		dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
 		goto Err;
 	}
-	if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) {
+	if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+			    ali1563_pci_driver.name)) {
 		dev_warn(&dev->dev,"Could not allocate I/O space");
 		goto Err;
 	}
@@ -406,7 +408,8 @@ static struct pci_device_id __devinitdata ali1563_id_table[] = {
 MODULE_DEVICE_TABLE (pci, ali1563_id_table);
 
 static struct pci_driver ali1563_pci_driver = {
- 	.name		= "ali1563_i2c",
+	.owner		= THIS_MODULE,
+ 	.name		= "ali1563_smbus",
 	.id_table	= ali1563_id_table,
  	.probe		= ali1563_probe,
 	.remove		= __devexit_p(ali1563_remove),
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index b3f50bff39a..400b08ed429 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -125,12 +125,13 @@
 
 /* If force_addr is set to anything different from 0, we forcibly enable
    the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
 module_param(force_addr, ushort, 0);
 MODULE_PARM_DESC(force_addr,
 		 "Initialize the base address of the i2c controller");
 
-static unsigned short ali15x3_smba = 0;
+static struct pci_driver ali15x3_driver;
+static unsigned short ali15x3_smba;
 
 static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
 {
@@ -166,7 +167,8 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
 	if(force_addr)
 		ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
 
-	if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) {
+	if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+			    ali15x3_driver.name)) {
 		dev_err(&ALI15X3_dev->dev,
 			"ALI15X3_smb region 0x%x already in use!\n",
 			ali15x3_smba);
@@ -470,7 +472,6 @@ static struct i2c_adapter ali15x3_adapter = {
 	.owner		= THIS_MODULE,
 	.class          = I2C_CLASS_HWMON,
 	.algo		= &smbus_algorithm,
-	.name		= "unset",
 };
 
 static struct pci_device_id ali15x3_ids[] = {
@@ -503,6 +504,7 @@ static void __devexit ali15x3_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver ali15x3_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "ali15x3_smbus",
 	.id_table	= ali15x3_ids,
 	.probe		= ali15x3_probe,
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 4e553e8c5cb..f51ab652300 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -169,12 +169,12 @@ static int __init amd756_s4882_init(void)
 	init_MUTEX(&amd756_lock);
 
 	/* Define the 5 virtual adapters and algorithms structures */
-	if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter),
+	if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter),
 				      GFP_KERNEL))) {
 		error = -ENOMEM;
 		goto ERROR1;
 	}
-	if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm),
+	if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm),
 				   GFP_KERNEL))) {
 		error = -ENOMEM;
 		goto ERROR2;
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 6ad0603384b..de035d137c3 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -85,8 +85,8 @@
 #define AMD756_PROCESS_CALL	0x04
 #define AMD756_BLOCK_DATA	0x05
 
-
-static unsigned short amd756_ioport = 0;
+static struct pci_driver amd756_driver;
+static unsigned short amd756_ioport;
 
 /* 
   SMBUS event = I/O 28-29 bit 11
@@ -303,7 +303,6 @@ struct i2c_adapter amd756_smbus = {
 	.owner		= THIS_MODULE,
 	.class          = I2C_CLASS_HWMON,
 	.algo		= &smbus_algorithm,
-	.name		= "unset",
 };
 
 enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
@@ -365,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
 		amd756_ioport += SMB_ADDR_OFFSET;
 	}
 
-	if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) {
+	if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
 		dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
 			amd756_ioport);
 		return -ENODEV;
@@ -402,6 +401,7 @@ static void __devexit amd756_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver amd756_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "amd756_smbus",
 	.id_table	= amd756_ids,
 	.probe		= amd756_probe,
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 45ea24ba14d..f3b79a68dbe 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -30,6 +30,8 @@ struct amd_smbus {
 	int size;
 };
 
+static struct pci_driver amd8111_driver;
+
 /*
  * AMD PCI control registers definitions.
  */
@@ -242,7 +244,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
 			break;
 
 		case I2C_SMBUS_BLOCK_PROC_CALL:
-			protocol |= pec;
 			len = min_t(u8, data->block[0], 31);
 			amd_ec_write(smbus, AMD_SMB_CMD, command);
 			amd_ec_write(smbus, AMD_SMB_BCNT, len);
@@ -252,13 +253,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
 			read_write = I2C_SMBUS_READ;
 			break;
 
-		case I2C_SMBUS_WORD_DATA_PEC:
-		case I2C_SMBUS_BLOCK_DATA_PEC:
-		case I2C_SMBUS_PROC_CALL_PEC:
-		case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
-			dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
-			return -1;
-
 		default:
 			dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
 			return -1;
@@ -343,16 +337,15 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_
 	if (~pci_resource_flags(dev, 0) & IORESOURCE_IO)
 		return -ENODEV;
 
-	smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL);
+	smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL);
 	if (!smbus)
 		return -ENOMEM;
-	memset(smbus, 0, sizeof(struct amd_smbus));
 
 	smbus->dev = dev;
 	smbus->base = pci_resource_start(dev, 0);
 	smbus->size = pci_resource_len(dev, 0);
 
-	if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0"))
+	if (!request_region(smbus->base, smbus->size, amd8111_driver.name))
 		goto out_kfree;
 
 	smbus->adapter.owner = THIS_MODULE;
@@ -391,6 +384,7 @@ static void __devexit amd8111_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver amd8111_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "amd8111_smbus2",
 	.id_table	= amd8111_ids,
 	.probe		= amd8111_probe,
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 6930b660e50..59f8308c235 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -22,7 +22,7 @@
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
    Frodo Looijaard <frodol@dds.nl> */
 
-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of 
+/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
    for Alpha Processor Inc. UP-2000(+) boards */
 
 #include <linux/kernel.h>
@@ -46,12 +46,14 @@
 #define DEFAULT_BASE 0x330
 
 static int base;
+static u8 __iomem *base_iomem;
+
 static int irq;
 static int clock  = 0x1c;
 static int own    = 0x55;
 static int mmapped;
 
-/* vdovikin: removed static struct i2c_pcf_isa gpi; code - 
+/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
   this module in real supports only one device, due to missing arguments
   in some functions, called from the algo-pcf module. Sometimes it's
   need to be rewriten - but for now just remove this for simpler reading */
@@ -60,40 +62,33 @@ static wait_queue_head_t pcf_wait;
 static int pcf_pending;
 static spinlock_t lock;
 
+static struct i2c_adapter pcf_isa_ops;
+
 /* ----- local functions ----------------------------------------------	*/
 
 static void pcf_isa_setbyte(void *data, int ctl, int val)
 {
-	int address = ctl ? (base + 1) : base;
+	u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
 
 	/* enable irq if any specified for serial operation */
 	if (ctl && irq && (val & I2C_PCF_ESO)) {
 		val |= I2C_PCF_ENI;
 	}
 
-	pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255);
-
-	switch (mmapped) {
-	case 0: /* regular I/O */
-		outb(val, address);
-		break;
-	case 2: /* double mapped I/O needed for UP2000 board,
-                   I don't know why this... */
-		writeb(val, (void *)address);
-		/* fall */
-	case 1: /* memory mapped I/O */
-		writeb(val, (void *)address);
-		break;
-	}
+	pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val);
+	iowrite8(val, address);
+#ifdef __alpha__
+	/* API UP2000 needs some hardware fudging to make the write stick */
+	iowrite8(val, address);
+#endif
 }
 
 static int pcf_isa_getbyte(void *data, int ctl)
 {
-	int address = ctl ? (base + 1) : base;
-	int val = mmapped ? readb((void *)address) : inb(address);
-
-	pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val);
+	u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
+	int val = ioread8(address);
 
+	pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val);
 	return (val);
 }
 
@@ -149,16 +144,40 @@ static int pcf_isa_init(void)
 {
 	spin_lock_init(&lock);
 	if (!mmapped) {
-		if (!request_region(base, 2, "i2c (isa bus adapter)")) {
-			printk(KERN_ERR
-			       "i2c-elektor: requested I/O region (0x%X:2) "
-			       "is in use.\n", base);
+		if (!request_region(base, 2, pcf_isa_ops.name)) {
+			printk(KERN_ERR "%s: requested I/O region (%#x:2) is "
+			       "in use\n", pcf_isa_ops.name, base);
+			return -ENODEV;
+		}
+		base_iomem = ioport_map(base, 2);
+		if (!base_iomem) {
+			printk(KERN_ERR "%s: remap of I/O region %#x failed\n",
+			       pcf_isa_ops.name, base);
+			release_region(base, 2);
+			return -ENODEV;
+		}
+	} else {
+		if (!request_mem_region(base, 2, pcf_isa_ops.name)) {
+			printk(KERN_ERR "%s: requested memory region (%#x:2) "
+			       "is in use\n", pcf_isa_ops.name, base);
+			return -ENODEV;
+		}
+		base_iomem = ioremap(base, 2);
+		if (base_iomem == NULL) {
+			printk(KERN_ERR "%s: remap of memory region %#x "
+			       "failed\n", pcf_isa_ops.name, base);
+			release_mem_region(base, 2);
 			return -ENODEV;
 		}
 	}
+	pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base,
+		 base_iomem);
+
 	if (irq > 0) {
-		if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) {
-			printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq);
+		if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name,
+				NULL) < 0) {
+			printk(KERN_ERR "%s: Request irq%d failed\n",
+			       pcf_isa_ops.name, irq);
 			irq = 0;
 		} else
 			enable_irq(irq);
@@ -186,47 +205,49 @@ static struct i2c_adapter pcf_isa_ops = {
 	.class		= I2C_CLASS_HWMON,
 	.id		= I2C_HW_P_ELEK,
 	.algo_data	= &pcf_isa_data,
-	.name		= "PCF8584 ISA adapter",
+	.name		= "i2c-elektor",
 };
 
-static int __init i2c_pcfisa_init(void) 
+static int __init i2c_pcfisa_init(void)
 {
 #ifdef __alpha__
-	/* check to see we have memory mapped PCF8584 connected to the 
+	/* check to see we have memory mapped PCF8584 connected to the
 	Cypress cy82c693 PCI-ISA bridge as on UP2000 board */
 	if (base == 0) {
 		struct pci_dev *cy693_dev;
-		
-		cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, 
+
+		cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
 					   PCI_DEVICE_ID_CONTAQ_82C693, NULL);
 		if (cy693_dev) {
-			char config;
+			unsigned char config;
 			/* yeap, we've found cypress, let's check config */
 			if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
-				
-				pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config);
+
+				pr_debug("%s: found cy82c693, config "
+					 "register 0x47 = 0x%02x\n",
+					 pcf_isa_ops.name, config);
 
 				/* UP2000 board has this register set to 0xe1,
-                                   but the most significant bit as seems can be 
+				   but the most significant bit as seems can be
 				   reset during the proper initialisation
-                                   sequence if guys from API decides to do that
-                                   (so, we can even enable Tsunami Pchip
-                                   window for the upper 1 Gb) */
+				   sequence if guys from API decides to do that
+				   (so, we can even enable Tsunami Pchip
+				   window for the upper 1 Gb) */
 
 				/* so just check for ROMCS at 0xe0000,
-                                   ROMCS enabled for writes
+				   ROMCS enabled for writes
 				   and external XD Bus buffer in use. */
 				if ((config & 0x7f) == 0x61) {
 					/* seems to be UP2000 like board */
 					base = 0xe0000;
-                                        /* I don't know why we need to
-                                           write twice */
-					mmapped = 2;
-                                        /* UP2000 drives ISA with
+					mmapped = 1;
+					/* UP2000 drives ISA with
 					   8.25 MHz (PCI/4) clock
 					   (this can be read from cypress) */
 					clock = I2C_PCF_CLK | I2C_PCF_TRNS90;
-					printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n");
+					pr_info("%s: found API UP2000 like "
+						"board, will probe PCF8584 "
+						"later\n", pcf_isa_ops.name);
 				}
 			}
 			pci_dev_put(cy693_dev);
@@ -236,12 +257,11 @@ static int __init i2c_pcfisa_init(void)
 
 	/* sanity checks for mmapped I/O */
 	if (mmapped && base < 0xc8000) {
-		printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base);
+		printk(KERN_ERR "%s: incorrect base address (%#x) specified "
+		       "for mmapped I/O\n", pcf_isa_ops.name, base);
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n");
-
 	if (base == 0) {
 		base = DEFAULT_BASE;
 	}
@@ -251,8 +271,8 @@ static int __init i2c_pcfisa_init(void)
 		return -ENODEV;
 	if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
 		goto fail;
-	
-	printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base);
+
+	dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base);
 
 	return 0;
 
@@ -262,8 +282,13 @@ static int __init i2c_pcfisa_init(void)
 		free_irq(irq, NULL);
 	}
 
-	if (!mmapped)
-		release_region(base , 2);
+	if (!mmapped) {
+		ioport_unmap(base_iomem);
+		release_region(base, 2);
+	} else {
+		iounmap(base_iomem);
+		release_mem_region(base, 2);
+	}
 	return -ENODEV;
 }
 
@@ -276,8 +301,13 @@ static void i2c_pcfisa_exit(void)
 		free_irq(irq, NULL);
 	}
 
-	if (!mmapped)
-		release_region(base , 2);
+	if (!mmapped) {
+		ioport_unmap(base_iomem);
+		release_region(base, 2);
+	} else {
+		iounmap(base_iomem);
+		release_mem_region(base, 2);
+	}
 }
 
 MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index e0cb3b0f92f..1b5354e24bf 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -155,6 +155,7 @@ static void __devexit hydra_remove(struct pci_dev *dev)
 
 
 static struct pci_driver hydra_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "hydra_smbus",
 	.id_table	= hydra_ids,
 	.probe		= hydra_probe,
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 709beab7660..4f63195069d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -52,10 +52,6 @@
 #include <linux/i2c.h>
 #include <asm/io.h>
 
-#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC
-#define HAVE_PEC
-#endif
-
 /* I801 SMBus address offsets */
 #define SMBHSTSTS	(0 + i801_smba)
 #define SMBHSTCNT	(2 + i801_smba)
@@ -106,10 +102,11 @@ MODULE_PARM_DESC(force_addr,
 		 "EXTREMELY DANGEROUS!");
 
 static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data,
-				  char read_write, int command);
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+				  int command, int hwpec);
 
 static unsigned short i801_smba;
+static struct pci_driver i801_driver;
 static struct pci_dev *I801_dev;
 static int isich4;
 
@@ -143,7 +140,7 @@ static int i801_setup(struct pci_dev *dev)
 		}
 	}
 
-	if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) {
+	if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
 		dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
 			i801_smba);
 		error_return = -EBUSY;
@@ -252,7 +249,7 @@ static int i801_transaction(void)
 
 /* All-inclusive block transaction function */
 static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
-				  int command)
+				  int command, int hwpec)
 {
 	int i, len;
 	int smbcmd;
@@ -391,8 +388,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 			goto END;
 	}
 
-#ifdef HAVE_PEC
-	if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) {
+	if (hwpec) {
 		/* wait for INTR bit as advised by Intel */
 		timeout = 0;
 		do {
@@ -406,7 +402,6 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		}
 		outb_p(temp, SMBHSTSTS); 
 	}
-#endif
 	result = 0;
 END:
 	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
@@ -421,14 +416,13 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 		       unsigned short flags, char read_write, u8 command,
 		       int size, union i2c_smbus_data * data)
 {
-	int hwpec = 0;
+	int hwpec;
 	int block = 0;
 	int ret, xact = 0;
 
-#ifdef HAVE_PEC
-	if(isich4)
-		hwpec = (flags & I2C_CLIENT_PEC) != 0;
-#endif
+	hwpec = isich4 && (flags & I2C_CLIENT_PEC)
+		&& size != I2C_SMBUS_QUICK
+		&& size != I2C_SMBUS_I2C_BLOCK_DATA;
 
 	switch (size) {
 	case I2C_SMBUS_QUICK:
@@ -463,11 +457,6 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 		break;
 	case I2C_SMBUS_BLOCK_DATA:
 	case I2C_SMBUS_I2C_BLOCK_DATA:
-#ifdef HAVE_PEC
-	case I2C_SMBUS_BLOCK_DATA_PEC:
-		if(hwpec && size == I2C_SMBUS_BLOCK_DATA)
-			size = I2C_SMBUS_BLOCK_DATA_PEC;
-#endif
 		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMBHSTADD);
 		outb_p(command, SMBHSTCMD);
@@ -479,27 +468,18 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 		return -1;
 	}
 
-#ifdef HAVE_PEC
-	if(isich4 && hwpec) {
-		if(size != I2C_SMBUS_QUICK &&
-		   size != I2C_SMBUS_I2C_BLOCK_DATA)
-			outb_p(1, SMBAUXCTL);	/* enable HW PEC */
-	}
-#endif
+	if (hwpec)
+		outb_p(1, SMBAUXCTL);	/* enable hardware PEC */
+
 	if(block)
-		ret = i801_block_transaction(data, read_write, size);
+		ret = i801_block_transaction(data, read_write, size, hwpec);
 	else {
 		outb_p(xact | ENABLE_INT9, SMBHSTCNT);
 		ret = i801_transaction();
 	}
 
-#ifdef HAVE_PEC
-	if(isich4 && hwpec) {
-		if(size != I2C_SMBUS_QUICK &&
-		   size != I2C_SMBUS_I2C_BLOCK_DATA)
-			outb_p(0, SMBAUXCTL);
-	}
-#endif
+	if (hwpec)
+		outb_p(0, SMBAUXCTL);	/* disable hardware PEC */
 
 	if(block)
 		return ret;
@@ -526,12 +506,7 @@ static u32 i801_func(struct i2c_adapter *adapter)
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 	    I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
-#ifdef HAVE_PEC
-	     | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC |
-	                 I2C_FUNC_SMBUS_HWPEC_CALC
-	               : 0)
-#endif
-	    ;
+	     | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0);
 }
 
 static struct i2c_algorithm smbus_algorithm = {
@@ -543,7 +518,6 @@ static struct i2c_adapter i801_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
 	.algo		= &smbus_algorithm,
-	.name		= "unset",
 };
 
 static struct pci_device_id i801_ids[] = {
@@ -586,6 +560,7 @@ static void __devexit i801_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver i801_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "i801_smbus",
 	.id_table	= i801_ids,
 	.probe		= i801_probe,
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
index 0ff7016e062..52bc30593bd 100644
--- a/drivers/i2c/busses/i2c-i810.c
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -32,6 +32,7 @@
    i810AB		7123           
    i810E		7125           
    i815			1132           
+   i845G		2562
 */
 
 #include <linux/kernel.h>
@@ -232,6 +233,7 @@ static void __devexit i810_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver i810_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "i810_smbus",
 	.id_table	= i810_ids,
 	.probe		= i810_probe,
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index a3ed9590f02..1a587253d71 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -672,13 +672,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 		printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
 			ocp->def->index);
 
-	if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
+	if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) {
 		printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
 			ocp->def->index);
 		return -ENOMEM;
 	}
 
-	memset(dev, 0, sizeof(*dev));
 	dev->idx = ocp->def->index;
 	ocp_set_drvdata(ocp, dev);
 	
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 7bd9102db70..9888fae1f37 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -43,7 +43,7 @@
 #include "i2c-iop3xx.h"
 
 /* global unit counter */
-static int i2c_id = 0;
+static int i2c_id;
 
 static inline unsigned char 
 iic_cook_addr(struct i2c_msg *msg) 
@@ -440,19 +440,17 @@ iop3xx_i2c_probe(struct device *dev)
 	struct i2c_adapter *new_adapter;
 	struct i2c_algo_iop3xx_data *adapter_data;
 
-	new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+	new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
 	if (!new_adapter) {
 		ret = -ENOMEM;
 		goto out;
 	}
-	memset((void*)new_adapter, 0, sizeof(*new_adapter));
 
-	adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
+	adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
 	if (!adapter_data) {
 		ret = -ENOMEM;
 		goto free_adapter;
 	}
-	memset((void*)adapter_data, 0, sizeof(*adapter_data));
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -525,6 +523,7 @@ out:
 
 
 static struct device_driver iop3xx_i2c_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "IOP3xx-I2C",
 	.bus		= &platform_bus_type,
 	.probe		= iop3xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index bdc6806dafa..4fdc0241160 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -92,6 +92,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver)
 
 	/* Add the driver to the list of i2c drivers in the driver core */
 	driver->driver.name = driver->name;
+	driver->driver.owner = driver->owner;
 	driver->driver.bus = &i2c_bus_type;
 	driver->driver.probe = i2c_isa_device_probe;
 	driver->driver.remove = i2c_isa_device_remove;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 1956af382cd..42016ee6ef1 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -36,6 +36,8 @@
 #include <asm/hardware.h>	/* Pick up IXP2000-specific bits */
 #include <asm/arch/gpio.h>
 
+static struct device_driver ixp2000_i2c_driver;
+
 static inline int ixp2000_scl_pin(void *data)
 {
 	return ((struct ixp2000_i2c_pins*)data)->scl_pin;
@@ -104,11 +106,10 @@ static int ixp2000_i2c_probe(struct device *dev)
 	struct platform_device *plat_dev = to_platform_device(dev);
 	struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
 	struct ixp2000_i2c_data *drv_data = 
-		kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
+		kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
 
 	if (!drv_data)
 		return -ENOMEM;
-	memzero(drv_data, sizeof(*drv_data));
 	drv_data->gpio_pins = gpio;
 
 	drv_data->algo_data.data = gpio;
@@ -121,6 +122,8 @@ static int ixp2000_i2c_probe(struct device *dev)
 	drv_data->algo_data.timeout = 100;
 
 	drv_data->adapter.id = I2C_HW_B_IXP2000,
+	strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name,
+		I2C_NAME_SIZE);
 	drv_data->adapter.algo_data = &drv_data->algo_data,
 
 	drv_data->adapter.dev.parent = &plat_dev->dev;
@@ -142,6 +145,7 @@ static int ixp2000_i2c_probe(struct device *dev)
 }
 
 static struct device_driver ixp2000_i2c_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "IXP2000-I2C",
 	.bus		= &platform_bus_type,
 	.probe		= ixp2000_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index f6f5ca31fdb..69303ab65e0 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -35,6 +35,8 @@
 
 #include <asm/hardware.h>	/* Pick up IXP4xx-specific bits */
 
+static struct device_driver ixp4xx_i2c_driver;
+
 static inline int ixp4xx_scl_pin(void *data)
 {
 	return ((struct ixp4xx_i2c_pins*)data)->scl_pin;
@@ -105,12 +107,11 @@ static int ixp4xx_i2c_probe(struct device *dev)
 	struct platform_device *plat_dev = to_platform_device(dev);
 	struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data;
 	struct ixp4xx_i2c_data *drv_data = 
-		kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
+		kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
 
 	if(!drv_data)
 		return -ENOMEM;
 
-	memzero(drv_data, sizeof(struct ixp4xx_i2c_data));
 	drv_data->gpio_pins = gpio;
 
 	/*
@@ -129,6 +130,8 @@ static int ixp4xx_i2c_probe(struct device *dev)
 	drv_data->algo_data.timeout = 100;
 
 	drv_data->adapter.id = I2C_HW_B_IXP4XX;
+	strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name,
+		I2C_NAME_SIZE);
 	drv_data->adapter.algo_data = &drv_data->algo_data;
 
 	drv_data->adapter.dev.parent = &plat_dev->dev;
@@ -151,6 +154,7 @@ static int ixp4xx_i2c_probe(struct device *dev)
 }
 
 static struct device_driver ixp4xx_i2c_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "IXP4XX-I2C",
 	.bus		= &platform_bus_type,
 	.probe		= ixp4xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
index eff5896ce86..d61f748278f 100644
--- a/drivers/i2c/busses/i2c-keywest.c
+++ b/drivers/i2c/busses/i2c-keywest.c
@@ -535,13 +535,12 @@ create_iface(struct device_node *np, struct device *dev)
 
 	tsize = sizeof(struct keywest_iface) +
 		(sizeof(struct keywest_chan) + 4) * nchan;
-	iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL);
+	iface = kzalloc(tsize, GFP_KERNEL);
 	if (iface == NULL) {
 		printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
 		pmac_low_i2c_unlock(np);
 		return -ENOMEM;
 	}
-	memset(iface, 0, tsize);
 	spin_lock_init(&iface->lock);
 	init_completion(&iface->complete);
 	iface->node = of_node_get(np);
@@ -716,6 +715,7 @@ static struct of_device_id i2c_keywest_match[] =
 
 static struct macio_driver i2c_keywest_macio_driver = 
 {
+	.owner		= THIS_MODULE,
 	.name 		= "i2c-keywest",
 	.match_table	= i2c_keywest_match,
 	.probe		= create_iface_macio,
@@ -724,6 +724,7 @@ static struct macio_driver i2c_keywest_macio_driver =
 
 static struct of_platform_driver i2c_keywest_of_platform_driver = 
 {
+	.owner		= THIS_MODULE,
 	.name 		= "i2c-keywest",
 	.match_table	= i2c_keywest_match,
 	.probe		= create_iface_of_platform,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f065583ddcf..8491633005b 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -296,10 +296,9 @@ static int fsl_i2c_probe(struct device *device)
 
 	pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
 
-	if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
+	if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) {
 		return -ENOMEM;
 	}
-	memset(i2c, 0, sizeof(*i2c));
 
 	i2c->irq = platform_get_irq(pdev, 0);
 	i2c->flags = pdata->device_flags;
@@ -361,6 +360,7 @@ static int fsl_i2c_remove(struct device *device)
 
 /* Structure for a device driver */
 static struct device_driver fsl_i2c_driver = {
+	.owner = THIS_MODULE,
 	.name = "fsl-i2c",
 	.bus = &platform_bus_type,
 	.probe = fsl_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 99abca45fec..d0d2a6f1386 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -500,13 +500,10 @@ mv64xxx_i2c_probe(struct device *dev)
 	if ((pd->id != 0) || !pdata)
 		return -ENODEV;
 
-	drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
-
+	drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
 	if (!drv_data)
 		return -ENOMEM;
 
-	memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data));
-
 	if (mv64xxx_i2c_map_regs(pd, drv_data)) {
 		rc = -ENODEV;
 		goto exit_kfree;
@@ -570,6 +567,7 @@ mv64xxx_i2c_remove(struct device *dev)
 }
 
 static struct device_driver mv64xxx_i2c_driver = {
+	.owner	= THIS_MODULE,
 	.name	= MV64XXX_I2C_CTLR_NAME,
 	.bus	= &platform_bus_type,
 	.probe	= mv64xxx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index fe9c0f42a2b..fd26036e68a 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -97,6 +97,7 @@ struct nforce2_smbus {
 #define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA		0x4a
 #define NVIDIA_SMB_PRTCL_PEC			0x80
 
+static struct pci_driver nforce2_driver;
 
 static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
 		       unsigned short flags, char read_write,
@@ -113,7 +114,6 @@ static struct i2c_adapter nforce2_adapter = {
 	.owner          = THIS_MODULE,
 	.class          = I2C_CLASS_HWMON,
 	.algo           = &smbus_algorithm,
-	.name   	= "unset",
 };
 
 /* Return -1 on error. See smbus.h for more information */
@@ -188,13 +188,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 			dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
 			return -1;
 
-		case I2C_SMBUS_WORD_DATA_PEC:
-		case I2C_SMBUS_BLOCK_DATA_PEC:
-		case I2C_SMBUS_PROC_CALL_PEC:
-		case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
-			dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
-			return -1;
-
 		default:
 			dev_err(&adap->dev, "Unsupported transaction %d\n", size);
 			return -1;
@@ -285,7 +278,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
 	smbus->base = iobase & 0xfffc;
 	smbus->size = 8;
 
-	if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) {
+	if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
 		dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
 			smbus->base, smbus->base+smbus->size-1, name);
 		return -1;
@@ -313,10 +306,8 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
 	int res1, res2;
 
 	/* we support 2 SMBus adapters */
-	if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus),
-				       	GFP_KERNEL)))
+	if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL)))
 		return -ENOMEM;
-	memset (smbuses, 0, 2*sizeof(struct nforce2_smbus));
 	pci_set_drvdata(dev, smbuses);
 
 	/* SMBus adapter 1 */
@@ -356,6 +347,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver nforce2_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "nForce2_smbus",
 	.id_table	= nforce2_ids,
 	.probe		= nforce2_probe,
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 71a2502fe06..2854d858fc9 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -155,12 +155,11 @@ static void i2c_parport_attach (struct parport *port)
 {
 	struct i2c_par *adapter;
 	
-	adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL);
+	adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
 	if (adapter == NULL) {
-		printk(KERN_ERR "i2c-parport: Failed to kmalloc\n");
+		printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
 		return;
 	}
-	memset(adapter, 0x00, sizeof(struct i2c_par));
 
 	pr_debug("i2c-parport: attaching to %s\n", port->name);
 	adapter->pdev = parport_register_device(port, "i2c-parport",
@@ -232,7 +231,7 @@ static void i2c_parport_detach (struct parport *port)
 	}
 }
 
-static struct parport_driver i2c_driver = {
+static struct parport_driver i2c_parport_driver = {
 	.name	= "i2c-parport",
 	.attach	= i2c_parport_attach,
 	.detach	= i2c_parport_detach,
@@ -250,12 +249,12 @@ static int __init i2c_parport_init(void)
 		type = 0;
 	}
 	
-	return parport_register_driver(&i2c_driver);
+	return parport_register_driver(&i2c_parport_driver);
 }
 
 static void __exit i2c_parport_exit(void)
 {
-	parport_unregister_driver(&i2c_driver);
+	parport_unregister_driver(&i2c_parport_driver);
 }
 
 MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 6d48a4da7be..7d63eec423f 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -90,13 +90,13 @@ struct sd {
 
 /* If force is set to anything different from 0, we forcibly enable the
    PIIX4. DANGEROUS! */
-static int force = 0;
+static int force;
 module_param (force, int, 0);
 MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
 
 /* If force_addr is set to anything different from 0, we forcibly enable
    the PIIX4 at the given address. VERY DANGEROUS! */
-static int force_addr = 0;
+static int force_addr;
 module_param (force_addr, int, 0);
 MODULE_PARM_DESC(force_addr,
 		 "Forcibly enable the PIIX4 at the given address. "
@@ -104,14 +104,15 @@ MODULE_PARM_DESC(force_addr,
 
 /* If fix_hstcfg is set to anything different from 0, we reset one of the
    registers to be a valid value. */
-static int fix_hstcfg = 0;
+static int fix_hstcfg;
 module_param (fix_hstcfg, int, 0);
 MODULE_PARM_DESC(fix_hstcfg,
 		"Fix config register. Needed on some boards (Force CPCI735).");
 
 static int piix4_transaction(void);
 
-static unsigned short piix4_smba = 0;
+static unsigned short piix4_smba;
+static struct pci_driver piix4_driver;
 static struct i2c_adapter piix4_adapter;
 
 static struct dmi_system_id __devinitdata piix4_dmi_table[] = {
@@ -157,7 +158,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 		}
 	}
 
-	if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) {
+	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
 		dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
 			piix4_smba);
 		return -ENODEV;
@@ -407,7 +408,6 @@ static struct i2c_adapter piix4_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
 	.algo		= &smbus_algorithm,
-	.name		= "unset",
 };
 
 static struct pci_device_id piix4_ids[] = {
@@ -462,6 +462,7 @@ static void __devexit piix4_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver piix4_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "piix4_smbus",
 	.id_table	= piix4_ids,
 	.probe		= piix4_probe,
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
index 8a9f5648a23..bfefe7f7a53 100644
--- a/drivers/i2c/busses/i2c-pmac-smu.c
+++ b/drivers/i2c/busses/i2c-pmac-smu.c
@@ -211,12 +211,11 @@ static int create_iface(struct device_node *np, struct device *dev)
 	}
 	busid = *reg;
 
-	iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL);
+	iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
 	if (iface == NULL) {
 		printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
 		return -ENOMEM;
 	}
-	memset(iface, 0, sizeof(struct smu_iface));
 	init_completion(&iface->complete);
 	iface->busid = busid;
 
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
index 83fd16d61ce..42cb1d8ca65 100644
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ b/drivers/i2c/busses/i2c-prosavage.c
@@ -83,11 +83,6 @@ struct s_i2c_chip {
 /*
  * i2c configuration
  */
-#ifndef I2C_HW_B_S3VIA
-#define I2C_HW_B_S3VIA	0x18	/* S3VIA ProSavage adapter		*/
-#endif
-
-/* delays */
 #define CYCLE_DELAY	10
 #define TIMEOUT		(HZ / 2)
 
@@ -241,14 +236,12 @@ static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_devic
 	struct s_i2c_chip *chip;
 	struct s_i2c_bus  *bus;
 
-        pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); 
+	pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
 	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
 	if (chip == NULL) {
 		return -ENOMEM;
 	}
 
-	memset(chip, 0, sizeof(struct s_i2c_chip));
-
 	base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
 	len  = dev->resource[0].end - base + 1;
 	chip->mmio = ioremap_nocache(base, len);
@@ -308,6 +301,7 @@ static struct pci_device_id prosavage_pci_tbl[] = {
 MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
 
 static struct pci_driver prosavage_driver = {
+	.owner		=	THIS_MODULE,
 	.name		=	"prosavage_smbus",
 	.id_table	=	prosavage_pci_tbl,
 	.probe		=	prosavage_probe,
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 69fa282df2d..6ced28e9007 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -896,6 +896,7 @@ static int s3c24xx_i2c_resume(struct device *dev)
 /* device driver for platform bus bits */
 
 static struct device_driver s3c2410_i2c_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "s3c2410-i2c",
 	.bus		= &platform_bus_type,
 	.probe		= s3c24xx_i2c_probe,
@@ -904,6 +905,7 @@ static struct device_driver s3c2410_i2c_driver = {
 };
 
 static struct device_driver s3c2440_i2c_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "s3c2440-i2c",
 	.bus		= &platform_bus_type,
 	.probe		= s3c24xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
index 0c8518298e4..aebe87ba403 100644
--- a/drivers/i2c/busses/i2c-savage4.c
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -179,6 +179,7 @@ static void __devexit savage4_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver savage4_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "savage4_smbus",
 	.id_table	= savage4_ids,
 	.probe		= savage4_probe,
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 080318d6f54..3ad27c3ba15 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -123,11 +123,12 @@ static int blacklist[] = {
 
 /* If force_addr is set to anything different from 0, we forcibly enable
    the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
 module_param(force_addr, ushort, 0);
 MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
 
-static unsigned short sis5595_base = 0;
+static struct pci_driver sis5595_driver;
+static unsigned short sis5595_base;
 
 static u8 sis5595_read(u8 reg)
 {
@@ -172,7 +173,8 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
 
 	/* NB: We grab just the two SMBus registers here, but this may still
 	 * interfere with ACPI :-(  */
-	if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) {
+	if (!request_region(sis5595_base + SMB_INDEX, 2,
+			    sis5595_driver.name)) {
 		dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
 			sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
 		return -ENODEV;
@@ -364,7 +366,6 @@ static struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter sis5595_adapter = {
 	.owner		= THIS_MODULE,
 	.class          = I2C_CLASS_HWMON,
-	.name		= "unset",
 	.algo		= &smbus_algorithm,
 };
 
@@ -397,6 +398,7 @@ static void __devexit sis5595_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver sis5595_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "sis5595_smbus",
 	.id_table	= sis5595_ids,
 	.probe		= sis5595_probe,
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 86f0f448fa0..7f49e5fd3ff 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -92,6 +92,8 @@
 #define SIS630_PCALL		0x04
 #define SIS630_BLOCK_DATA	0x05
 
+static struct pci_driver sis630_driver;
+
 /* insmod parameters */
 static int high_clock;
 static int force;
@@ -101,7 +103,7 @@ module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
 
 /* acpi base address */
-static unsigned short acpi_base = 0;
+static unsigned short acpi_base;
 
 /* supported chips */
 static int supported[] = {
@@ -432,7 +434,8 @@ static int sis630_setup(struct pci_dev *sis630_dev)
 	dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
 
 	/* Everything is happy, let's grab the memory and set things up. */
-	if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) {
+	if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+			    sis630_driver.name)) {
 		dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
 			"in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
 		goto exit;
@@ -455,7 +458,6 @@ static struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter sis630_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
-	.name		= "unset",
 	.algo		= &smbus_algorithm,
 };
 
@@ -494,6 +496,7 @@ static void __devexit sis630_remove(struct pci_dev *dev)
 
 
 static struct pci_driver sis630_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "sis630_smbus",
 	.id_table	= sis630_ids,
 	.probe		= sis630_probe,
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index ead2ff3cf60..6a134c09132 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -82,8 +82,9 @@
 #define SIS96x_PROC_CALL  0x04
 #define SIS96x_BLOCK_DATA 0x05
 
+static struct pci_driver sis96x_driver;
 static struct i2c_adapter sis96x_adapter;
-static u16 sis96x_smbus_base = 0;
+static u16 sis96x_smbus_base;
 
 static inline u8 sis96x_read(u8 reg)
 {
@@ -257,7 +258,6 @@ static struct i2c_adapter sis96x_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
 	.algo		= &smbus_algorithm,
-	.name		= "unset",
 };
 
 static struct pci_device_id sis96x_ids[] = {
@@ -294,7 +294,8 @@ static int __devinit sis96x_probe(struct pci_dev *dev,
 			sis96x_smbus_base);
 
 	/* Everything is happy, let's grab the memory and set things up. */
-	if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) {
+	if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
+			    sis96x_driver.name)) {
 		dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
 			"already in use!\n", sis96x_smbus_base,
 			sis96x_smbus_base + SMB_IOSIZE - 1);
@@ -328,6 +329,7 @@ static void __devexit sis96x_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver sis96x_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "sis96x_smbus",
 	.id_table	= sis96x_ids,
 	.probe		= sis96x_probe,
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 040b8abeabb..544a38e6439 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -43,9 +43,9 @@
 
 /* io-region reservation */
 #define IOSPACE		0x06
-#define IOTEXT		"via-i2c"
 
-static u16 pm_io_base = 0;
+static struct pci_driver vt586b_driver;
+static u16 pm_io_base;
 
 /*
    It does not appear from the datasheet that the GPIO pins are
@@ -130,7 +130,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i
 	pci_read_config_word(dev, base, &pm_io_base);
 	pm_io_base &= (0xff << 8);
 
-	if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) {
+	if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) {
 		dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE);
 		return -ENODEV;
 	}
@@ -159,6 +159,7 @@ static void __devexit vt586b_remove(struct pci_dev *dev)
 
 
 static struct pci_driver vt586b_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "vt586b_smbus",
 	.id_table	= vt586b_ids,
 	.probe		= vt586b_probe,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 99d209e0485..c9366b50483 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -1,9 +1,10 @@
 /*
     i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
               monitoring
-    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>, 
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
     Mark D. Studebaker <mdsxyz123@yahoo.com>
+    Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -21,15 +22,19 @@
 */
 
 /*
-   Supports Via devices:
-	82C596A/B (0x3050)
-	82C596B (0x3051)
-	82C686A/B
-	8231
-	8233
-	8233A (0x3147 and 0x3177)
-	8235
-	8237
+   Supports the following VIA south bridges:
+
+   Chip name          PCI ID  REV     I2C block
+   VT82C596A          0x3050             no
+   VT82C596B          0x3051             no
+   VT82C686A          0x3057  0x30       no
+   VT82C686B          0x3057  0x40       yes
+   VT8231             0x8235             no?
+   VT8233             0x3074             yes
+   VT8233A            0x3147             yes?
+   VT8235             0x3177             yes
+   VT8237R            0x3227             yes
+
    Note: we assume there can only be one device, with one SMBus interface.
 */
 
@@ -38,7 +43,6 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
-#include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -46,48 +50,37 @@
 
 static struct pci_dev *vt596_pdev;
 
-#define SMBBA1	   	 0x90
-#define SMBBA2     	 0x80
-#define SMBBA3     	 0xD0
+#define SMBBA1		0x90
+#define SMBBA2		0x80
+#define SMBBA3		0xD0
 
 /* SMBus address offsets */
 static unsigned short vt596_smba;
 #define SMBHSTSTS	(vt596_smba + 0)
-#define SMBHSLVSTS	(vt596_smba + 1)
 #define SMBHSTCNT	(vt596_smba + 2)
 #define SMBHSTCMD	(vt596_smba + 3)
 #define SMBHSTADD	(vt596_smba + 4)
 #define SMBHSTDAT0	(vt596_smba + 5)
 #define SMBHSTDAT1	(vt596_smba + 6)
 #define SMBBLKDAT	(vt596_smba + 7)
-#define SMBSLVCNT	(vt596_smba + 8)
-#define SMBSHDWCMD	(vt596_smba + 9)
-#define SMBSLVEVT	(vt596_smba + 0xA)
-#define SMBSLVDAT	(vt596_smba + 0xC)
 
 /* PCI Address Constants */
 
 /* SMBus data in configuration space can be found in two places,
-   We try to select the better one*/
-
-static unsigned short smb_cf_hstcfg = 0xD2;
+   We try to select the better one */
 
-#define SMBHSTCFG   (smb_cf_hstcfg)
-#define SMBSLVC     (smb_cf_hstcfg + 1)
-#define SMBSHDW1    (smb_cf_hstcfg + 2)
-#define SMBSHDW2    (smb_cf_hstcfg + 3)
-#define SMBREV      (smb_cf_hstcfg + 4)
+static unsigned short SMBHSTCFG = 0xD2;
 
 /* Other settings */
 #define MAX_TIMEOUT	500
-#define ENABLE_INT9	0
 
 /* VT82C596 constants */
-#define VT596_QUICK      0x00
-#define VT596_BYTE       0x04
-#define VT596_BYTE_DATA  0x08
-#define VT596_WORD_DATA  0x0C
-#define VT596_BLOCK_DATA 0x14
+#define VT596_QUICK		0x00
+#define VT596_BYTE		0x04
+#define VT596_BYTE_DATA		0x08
+#define VT596_WORD_DATA		0x0C
+#define VT596_BLOCK_DATA	0x14
+#define VT596_I2C_BLOCK_DATA	0x34
 
 
 /* If force is set to anything different from 0, we forcibly enable the
@@ -105,40 +98,65 @@ MODULE_PARM_DESC(force_addr,
 		 "EXTREMELY DANGEROUS!");
 
 
+static struct pci_driver vt596_driver;
 static struct i2c_adapter vt596_adapter;
 
-/* Another internally used function */
-static int vt596_transaction(void)
+#define FEATURE_I2CBLOCK	(1<<0)
+static unsigned int vt596_features;
+
+#ifdef DEBUG
+static void vt596_dump_regs(const char *msg, u8 size)
+{
+	dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
+		"DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+
+	if (size == VT596_BLOCK_DATA
+	 || size == VT596_I2C_BLOCK_DATA) {
+		int i;
+
+		dev_dbg(&vt596_adapter.dev, "BLK=");
+		for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
+			printk("%02x,", inb_p(SMBBLKDAT));
+		printk("\n");
+		dev_dbg(&vt596_adapter.dev, "    ");
+		for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
+			printk("%02x,", inb_p(SMBBLKDAT));
+		printk("%02x\n", inb_p(SMBBLKDAT));
+	}
+}
+#else
+static inline void vt596_dump_regs(const char *msg, u8 size) { }
+#endif
+
+/* Return -1 on error, 0 on success */
+static int vt596_transaction(u8 size)
 {
 	int temp;
 	int result = 0;
 	int timeout = 0;
 
-	dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
-		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), 
-		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), 
-		inb_p(SMBHSTDAT1));
+	vt596_dump_regs("Transaction (pre)", size);
 
 	/* Make sure the SMBus host is ready to start transmitting */
 	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
 		dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
-				"Resetting...\n", temp);
-		
+			"Resetting... ", temp);
+
 		outb_p(temp, SMBHSTSTS);
 		if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
-			dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp);
-			
+			printk("Failed! (0x%02x)\n", temp);
 			return -1;
 		} else {
-			dev_dbg(&vt596_adapter.dev, "Successfull!\n");
+			printk("Successful!\n");
 		}
 	}
 
-	/* start the transaction by setting bit 6 */
-	outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+	/* Start the transaction by setting bit 6 */
+	outb_p(0x40 | (size & 0x3C), SMBHSTCNT);
 
-	/* We will always wait for a fraction of a second! 
-	   I don't know if VIA needs this, Intel did  */
+	/* We will always wait for a fraction of a second */
 	do {
 		msleep(1);
 		temp = inb_p(SMBHSTSTS);
@@ -147,77 +165,61 @@ static int vt596_transaction(void)
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
 		result = -1;
-		dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n");
+		dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
 	}
 
 	if (temp & 0x10) {
 		result = -1;
-		dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n");
+		dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
+			inb_p(SMBHSTCNT) & 0x3C);
 	}
 
 	if (temp & 0x08) {
 		result = -1;
-		dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be "
-			"locked until next hard\nreset. (sorry!)\n");
-		/* Clock stops and slave is stuck in mid-transmission */
+		dev_err(&vt596_adapter.dev, "SMBus collision!\n");
 	}
 
 	if (temp & 0x04) {
 		result = -1;
-		dev_dbg(&vt596_adapter.dev, "Error: no response!\n");
+		/* Quick commands are used to probe for chips, so
+		   errors are expected, and we don't want to frighten the
+		   user. */
+		if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK)
+			dev_err(&vt596_adapter.dev, "Transaction error!\n");
 	}
 
-	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+	/* Resetting status register */
+	if (temp & 0x1F)
 		outb_p(temp, SMBHSTSTS);
-		if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
-			dev_warn(&vt596_adapter.dev, "Failed reset at end "
-				 "of transaction (%02x)\n", temp);
-		}
-	}
 
-	dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
-		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
-		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), 
-		inb_p(SMBHSTDAT1));
-	
+	vt596_dump_regs("Transaction (post)", size);
+
 	return result;
 }
 
-/* Return -1 on error. */
+/* Return -1 on error, 0 on success */
 static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
-		unsigned short flags,  char read_write, u8 command,
-		int size,  union i2c_smbus_data *data)
+		unsigned short flags, char read_write, u8 command,
+		int size, union i2c_smbus_data *data)
 {
-	int i, len;
+	int i;
 
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_info(&vt596_adapter.dev,
-			 "I2C_SMBUS_PROC_CALL not supported!\n");
-		return -1;
 	case I2C_SMBUS_QUICK:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-		       SMBHSTADD);
 		size = VT596_QUICK;
 		break;
 	case I2C_SMBUS_BYTE:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-		       SMBHSTADD);
 		if (read_write == I2C_SMBUS_WRITE)
 			outb_p(command, SMBHSTCMD);
 		size = VT596_BYTE;
 		break;
 	case I2C_SMBUS_BYTE_DATA:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-		       SMBHSTADD);
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE)
 			outb_p(data->byte, SMBHSTDAT0);
 		size = VT596_BYTE_DATA;
 		break;
 	case I2C_SMBUS_WORD_DATA:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-		       SMBHSTADD);
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE) {
 			outb_p(data->word & 0xff, SMBHSTDAT0);
@@ -225,28 +227,33 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 		}
 		size = VT596_WORD_DATA;
 		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (!(vt596_features & FEATURE_I2CBLOCK))
+			goto exit_unsupported;
+		if (read_write == I2C_SMBUS_READ)
+			outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
+		/* Fall through */
 	case I2C_SMBUS_BLOCK_DATA:
-		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-		       SMBHSTADD);
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE) {
-			len = data->block[0];
-			if (len < 0)
-				len = 0;
+			u8 len = data->block[0];
 			if (len > I2C_SMBUS_BLOCK_MAX)
 				len = I2C_SMBUS_BLOCK_MAX;
 			outb_p(len, SMBHSTDAT0);
-			i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+			inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
 			for (i = 1; i <= len; i++)
 				outb_p(data->block[i], SMBBLKDAT);
 		}
-		size = VT596_BLOCK_DATA;
+		size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
+		       VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
 		break;
+	default:
+		goto exit_unsupported;
 	}
 
-	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+	outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
 
-	if (vt596_transaction()) /* Error in transaction */
+	if (vt596_transaction(size)) /* Error in transaction */
 		return -1;
 
 	if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
@@ -254,35 +261,39 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 
 	switch (size) {
 	case VT596_BYTE:
-		/* Where is the result put? I assume here it is in
-		 * SMBHSTDAT0 but it might just as well be in the
-		 * SMBHSTCMD. No clue in the docs 
-		 */
-		data->byte = inb_p(SMBHSTDAT0);
-		break;
 	case VT596_BYTE_DATA:
 		data->byte = inb_p(SMBHSTDAT0);
 		break;
 	case VT596_WORD_DATA:
 		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
 		break;
+	case VT596_I2C_BLOCK_DATA:
 	case VT596_BLOCK_DATA:
 		data->block[0] = inb_p(SMBHSTDAT0);
 		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
 			data->block[0] = I2C_SMBUS_BLOCK_MAX;
-		i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+		inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
 		for (i = 1; i <= data->block[0]; i++)
 			data->block[i] = inb_p(SMBBLKDAT);
 		break;
 	}
 	return 0;
+
+exit_unsupported:
+	dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+		 size);
+	return -1;
 }
 
 static u32 vt596_func(struct i2c_adapter *adapter)
 {
-	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 	    I2C_FUNC_SMBUS_BLOCK_DATA;
+
+	if (vt596_features & FEATURE_I2CBLOCK)
+		func |= I2C_FUNC_SMBUS_I2C_BLOCK;
+	return func;
 }
 
 static struct i2c_algorithm smbus_algorithm = {
@@ -294,7 +305,6 @@ static struct i2c_adapter vt596_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
 	.algo		= &smbus_algorithm,
-	.name		= "unset",
 };
 
 static int __devinit vt596_probe(struct pci_dev *pdev,
@@ -302,7 +312,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 {
 	unsigned char temp;
 	int error = -ENODEV;
-	
+
 	/* Determine the address of the SMBus areas */
 	if (force_addr) {
 		vt596_smba = force_addr & 0xfff0;
@@ -311,12 +321,12 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 	}
 
 	if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
-	    !(vt596_smba & 0x1)) {
+	    !(vt596_smba & 0x0001)) {
 		/* try 2nd address and config reg. for 596 */
 		if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
 		    !pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
-		    (vt596_smba & 0x1)) {
-			smb_cf_hstcfg = 0x84;
+		    (vt596_smba & 0x0001)) {
+			SMBHSTCFG = 0x84;
 		} else {
 			/* no matches at all */
 			dev_err(&pdev->dev, "Cannot configure "
@@ -333,10 +343,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 		return -ENODEV;
 	}
 
- found:
-	if (!request_region(vt596_smba, 8, "viapro-smbus")) {
+found:
+	if (!request_region(vt596_smba, 8, vt596_driver.name)) {
 		dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
-		        vt596_smba);
+			vt596_smba);
 		return -ENODEV;
 	}
 
@@ -348,16 +358,16 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 		pci_write_config_word(pdev, id->driver_data, vt596_smba);
 		pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
 		dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
-		     "address 0x%04x!\n", vt596_smba);
-	} else if ((temp & 1) == 0) {
+			 "address 0x%04x!\n", vt596_smba);
+	} else if (!(temp & 0x01)) {
 		if (force) {
-			/* NOTE: This assumes I/O space and other allocations 
-			 * WERE done by the Bios!  Don't complain if your 
-			 * hardware does weird things after enabling this. 
-			 * :') Check for Bios updates before resorting to 
+			/* NOTE: This assumes I/O space and other allocations
+			 * WERE done by the Bios!  Don't complain if your
+			 * hardware does weird things after enabling this.
+			 * :') Check for Bios updates before resorting to
 			 * this.
 			 */
-			pci_write_config_byte(pdev, SMBHSTCFG, temp | 1);
+			pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
 			dev_info(&pdev->dev, "Enabling SMBus device\n");
 		} else {
 			dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
@@ -367,22 +377,28 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 		}
 	}
 
-	if ((temp & 0x0E) == 8)
-		dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n");
-	else if ((temp & 0x0E) == 0)
-		dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n");
-	else
-		dev_dbg(&pdev->dev, "Illegal Interrupt configuration "
-			"(or code out of date)!\n");
-
-	pci_read_config_byte(pdev, SMBREV, &temp);
-	dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
 	dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
 
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_VIA_8237:
+	case PCI_DEVICE_ID_VIA_8235:
+	case PCI_DEVICE_ID_VIA_8233A:
+	case PCI_DEVICE_ID_VIA_8233_0:
+		vt596_features |= FEATURE_I2CBLOCK;
+		break;
+	case PCI_DEVICE_ID_VIA_82C686_4:
+		/* The VT82C686B (rev 0x40) does support I2C block
+		   transactions, but the VT82C686A (rev 0x30) doesn't */
+		if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
+		 && temp >= 0x40)
+			vt596_features |= FEATURE_I2CBLOCK;
+		break;
+	}
+
 	vt596_adapter.dev.parent = &pdev->dev;
 	snprintf(vt596_adapter.name, I2C_NAME_SIZE,
-			"SMBus Via Pro adapter at %04x", vt596_smba);
-	
+		 "SMBus Via Pro adapter at %04x", vt596_smba);
+
 	vt596_pdev = pci_dev_get(pdev);
 	if (i2c_add_adapter(&vt596_adapter)) {
 		pci_dev_put(vt596_pdev);
@@ -395,7 +411,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 	 */
 	return -ENODEV;
 
- release_region:
+release_region:
 	release_region(vt596_smba, 8);
 	return error;
 }
@@ -420,9 +436,10 @@ static struct pci_device_id vt596_ids[] = {
 	{ 0, }
 };
 
-MODULE_DEVICE_TABLE (pci, vt596_ids);
+MODULE_DEVICE_TABLE(pci, vt596_ids);
 
 static struct pci_driver vt596_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "vt596_smbus",
 	.id_table	= vt596_ids,
 	.probe		= vt596_probe,
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index b675773b0cc..650c3ebde84 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -225,6 +225,7 @@ static void __devexit voodoo3_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver voodoo3_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "voodoo3_smbus",
 	.id_table	= voodoo3_ids,
 	.probe		= voodoo3_probe,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index a1d580e0536..d3478e08452 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -442,14 +442,13 @@ static int  __init scx200_acb_create(int base, int index)
 	int rc = 0;
 	char description[64];
 
-	iface = kmalloc(sizeof(*iface), GFP_KERNEL);
+	iface = kzalloc(sizeof(*iface), GFP_KERNEL);
 	if (!iface) {
 		printk(KERN_ERR NAME ": can't allocate memory\n");
 		rc = -ENOMEM;
 		goto errout;
 	}
 
-	memset(iface, 0, sizeof(*iface));
 	adapter = &iface->adapter;
 	i2c_set_adapdata(adapter, iface);
 	snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 6bd44a44cd2..f9fae28f561 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,4 +126,13 @@ config SENSORS_MAX6875
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6875.
 
+config RTC_X1205_I2C
+	tristate "Xicor X1205 RTC chip"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Xicor X1205 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called x1205.
+
 endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index a876dd42b86..46178b57b1f 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_RTC8564)	+= rtc8564.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
+obj-$(CONFIG_RTC_X1205_I2C)	+= x1205.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 9d3175c0339..01b03700741 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -243,11 +243,10 @@ static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind)
 				     I2C_FUNC_I2C))
 		goto exit;
 
-	if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
+	if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
-	memset(data, 0, sizeof(struct ds1337_data));
 	INIT_LIST_HEAD(&data->list);
 
 	/* The common I2C client data is placed right before the
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index 0936327a946..da488b735ab 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -167,7 +167,8 @@ static void ds1374_set_tlet(ulong arg)
 
 static ulong new_time;
 
-DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time);
+static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet,
+				(ulong) & new_time);
 
 int ds1374_set_rtc_time(ulong nowtime)
 {
@@ -193,13 +194,11 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
 	struct i2c_client *client;
 	int rc;
 
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
 	if (!client)
 		return -ENOMEM;
 
-	memset(client, 0, sizeof(struct i2c_client));
 	strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
-	client->flags = I2C_DF_NOTIFY;
 	client->addr = addr;
 	client->adapter = adap;
 	client->driver = &ds1374_driver;
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index d58403a4790..4baf573fa04 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -88,8 +88,8 @@ static void eeprom_update_client(struct i2c_client *client, u8 slice)
 		dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
 
 		if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
-			for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX)
-				if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX)
+			for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX)
+				if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX)
 					goto exit;
 		} else {
 			if (i2c_smbus_write_byte(client, slice << 5)) {
@@ -155,7 +155,7 @@ static int eeprom_attach_adapter(struct i2c_adapter *adapter)
 }
 
 /* This function is called by i2c_probe */
-int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
+static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 {
 	struct i2c_client *new_client;
 	struct eeprom_data *data;
@@ -171,11 +171,10 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 					    | I2C_FUNC_SMBUS_BYTE))
 		goto exit;
 
-	if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
+	if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
-	memset(data, 0, sizeof(struct eeprom_data));
 
 	new_client = &data->client;
 	memset(data->data, 0xff, EEPROM_SIZE);
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 8ee56d4b389..eaa4742e04f 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -888,6 +888,7 @@ static int otg_remove(struct device *dev)
 }
 
 struct device_driver omap_otg_driver = {
+	.owner		= THIS_MODULE,
 	.name		= "omap_otg",
 	.bus		= &platform_bus_type,
 	.probe		= otg_probe,
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index 3f14528a52a..3df309ae44a 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -174,13 +174,11 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind)
 	struct i2c_client *client;
 	int rc;
 
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
 	if (!client)
 		return -ENOMEM;
 
-	memset(client, 0, sizeof(struct i2c_client));
 	strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
-	client->flags = I2C_DF_NOTIFY;
 	client->addr = addr;
 	client->adapter = adap;
 	client->driver = &m41t00_driver;
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 9e1aeb69abf..b376a006883 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -179,16 +179,14 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind)
 	if (address & 1)
 		return 0;
 
-	if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL)))
+	if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
 		return -ENOMEM;
-	memset(data, 0, sizeof(struct max6875_data));
 
 	/* A fake client is created on the odd address */
-	if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+	if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit_kfree1;
 	}
-	memset(fake_client, 0, sizeof(struct i2c_client));
 
 	/* Init real i2c_client */
 	real_client = &data->client;
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 225577fdda4..59a93034622 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -122,11 +122,10 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* OK. For now, we presume we have a valid client. We now create the
 	   client structure, even though we cannot fill it completely yet. */
-	if (!(data = kmalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
+	if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
-	memset(data, 0, sizeof(struct pca9539_data));
 
 	new_client = &data->client;
 	i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index 6525743ff9f..c323c2de236 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -115,7 +115,7 @@ static int pcf8574_attach_adapter(struct i2c_adapter *adapter)
 }
 
 /* This function is called by i2c_probe */
-int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
 {
 	struct i2c_client *new_client;
 	struct pcf8574_data *data;
@@ -127,11 +127,10 @@ int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* OK. For now, we presume we have a valid client. We now create the
 	   client structure, even though we cannot fill it completely yet. */
-	if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
+	if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
-	memset(data, 0, sizeof(struct pcf8574_data));
 
 	new_client = &data->client;
 	i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index 80f1df9a450..ce420a67560 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -166,7 +166,7 @@ static int pcf8591_attach_adapter(struct i2c_adapter *adapter)
 }
 
 /* This function is called by i2c_probe */
-int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
 {
 	struct i2c_client *new_client;
 	struct pcf8591_data *data;
@@ -178,11 +178,10 @@ int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
 
 	/* OK. For now, we presume we have a valid client. We now create the
 	   client structure, even though we cannot fill it completely yet. */
-	if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
+	if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
-	memset(data, 0, sizeof(struct pcf8591_data));
 	
 	new_client = &data->client;
 	i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c
index 0b5385c892b..916cdc1af23 100644
--- a/drivers/i2c/chips/rtc8564.c
+++ b/drivers/i2c/chips/rtc8564.c
@@ -148,17 +148,16 @@ static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind)
 		{addr, I2C_M_RD, 2, data}
 	};
 
-	d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
+	d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
 	if (!d) {
 		ret = -ENOMEM;
 		goto done;
 	}
-	memset(d, 0, sizeof(struct rtc8564_data));
 	new_client = &d->client;
 
 	strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE);
 	i2c_set_clientdata(new_client, d);
-	new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY;
+	new_client->flags = I2C_CLIENT_ALLOW_USE;
 	new_client->addr = addr;
 	new_client->adapter = adap;
 	new_client->driver = &rtc8564_driver;
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 280e9638c0f..280dd7a45db 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -500,11 +500,10 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 		return 0;
 	}
 
-	tps = kmalloc(sizeof *tps, GFP_KERNEL);
+	tps = kzalloc(sizeof *tps, GFP_KERNEL);
 	if (!tps)
 		return 0;
 
-	memset(tps, 0, sizeof *tps);
 	init_MUTEX(&tps->lock);
 	INIT_WORK(&tps->work, tps65010_work, tps);
 	tps->irq = -1;
diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c
new file mode 100644
index 00000000000..7da366cdc18
--- /dev/null
+++ b/drivers/i2c/chips/x1205.c
@@ -0,0 +1,698 @@
+/*
+ *  x1205.c - An i2c driver for the Xicor X1205 RTC
+ *  Copyright 2004 Karen Spearel
+ *  Copyright 2005 Alessandro Zummo
+ *
+ *  please send all reports to:
+ *	kas11 at tampabay dot rr dot com
+ *      a dot zummo at towertech dot it
+ *
+ *  based on the other drivers in this same directory.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/list.h>
+
+#include <linux/x1205.h>
+
+#define DRV_VERSION "0.9.9"
+
+/* Addresses to scan: none. This chip is located at
+ * 0x6f and uses a two bytes register addressing.
+ * Two bytes need to be written to read a single register,
+ * while most other chips just require one and take the second
+ * one as the data to be written. To prevent corrupting
+ * unknown chips, the user must explicitely set the probe parameter.
+ */
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD;
+I2C_CLIENT_MODULE_PARM(hctosys,
+	"Set the system time from the hardware clock upon initialization");
+
+/* offsets into CCR area */
+
+#define CCR_SEC			0
+#define CCR_MIN			1
+#define CCR_HOUR		2
+#define CCR_MDAY		3
+#define CCR_MONTH		4
+#define CCR_YEAR		5
+#define CCR_WDAY		6
+#define CCR_Y2K			7
+
+#define X1205_REG_SR		0x3F	/* status register */
+#define X1205_REG_Y2K		0x37
+#define X1205_REG_DW		0x36
+#define X1205_REG_YR		0x35
+#define X1205_REG_MO		0x34
+#define X1205_REG_DT		0x33
+#define X1205_REG_HR		0x32
+#define X1205_REG_MN		0x31
+#define X1205_REG_SC		0x30
+#define X1205_REG_DTR		0x13
+#define X1205_REG_ATR		0x12
+#define X1205_REG_INT		0x11
+#define X1205_REG_0		0x10
+#define X1205_REG_Y2K1		0x0F
+#define X1205_REG_DWA1		0x0E
+#define X1205_REG_YRA1		0x0D
+#define X1205_REG_MOA1		0x0C
+#define X1205_REG_DTA1		0x0B
+#define X1205_REG_HRA1		0x0A
+#define X1205_REG_MNA1		0x09
+#define X1205_REG_SCA1		0x08
+#define X1205_REG_Y2K0		0x07
+#define X1205_REG_DWA0		0x06
+#define X1205_REG_YRA0		0x05
+#define X1205_REG_MOA0		0x04
+#define X1205_REG_DTA0		0x03
+#define X1205_REG_HRA0		0x02
+#define X1205_REG_MNA0		0x01
+#define X1205_REG_SCA0		0x00
+
+#define X1205_CCR_BASE		0x30	/* Base address of CCR */
+#define X1205_ALM0_BASE		0x00	/* Base address of ALARM0 */
+
+#define X1205_SR_RTCF		0x01	/* Clock failure */
+#define X1205_SR_WEL		0x02	/* Write Enable Latch */
+#define X1205_SR_RWEL		0x04	/* Register Write Enable */
+
+#define X1205_DTR_DTR0		0x01
+#define X1205_DTR_DTR1		0x02
+#define X1205_DTR_DTR2		0x04
+
+#define X1205_HR_MIL		0x80	/* Set in ccr.hour for 24 hr mode */
+
+/* Prototypes */
+static int x1205_attach(struct i2c_adapter *adapter);
+static int x1205_detach(struct i2c_client *client);
+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
+static int x1205_command(struct i2c_client *client, unsigned int cmd,
+	void *arg);
+
+static struct i2c_driver x1205_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "x1205",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter = &x1205_attach,
+	.detach_client	= &x1205_detach,
+};
+
+struct x1205_data {
+	struct i2c_client client;
+	struct list_head list;
+	unsigned int epoch;
+};
+
+static const unsigned char days_in_mo[] =
+	{ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+static LIST_HEAD(x1205_clients);
+
+/* Workaround until the I2C subsytem will allow to send
+ * commands to a specific client. This function will send the command
+ * to the first client.
+ */
+int x1205_do_command(unsigned int cmd, void *arg)
+{
+	struct list_head *walk;
+	struct list_head *tmp;
+	struct x1205_data *data;
+
+	list_for_each_safe(walk, tmp, &x1205_clients) {
+		data = list_entry(walk, struct x1205_data, list);
+		return x1205_command(&data->client, cmd, arg);
+	}
+
+	return -ENODEV;
+}
+
+#define is_leap(year) \
+	((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+/* make sure the rtc_time values are in bounds */
+static int x1205_validate_tm(struct rtc_time *tm)
+{
+	int year = tm->tm_year + 1900;
+
+	if ((tm->tm_year < 70) || (tm->tm_year > 255))
+		return -EINVAL;
+
+	if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
+		return -EINVAL;
+
+	if (tm->tm_mday > days_in_mo[tm->tm_mon]
+		+ ((tm->tm_mon == 1) && is_leap(year)))
+		return -EINVAL;
+
+	if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * In the routines that deal directly with the x1205 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
+ * Epoch is initialized as 2000. Time is set to UTC.
+ */
+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
+				u8 reg_base)
+{
+	unsigned char dt_addr[2] = { 0, reg_base };
+	static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
+
+	unsigned char buf[8], sr;
+
+	struct i2c_msg msgs[] = {
+		{ client->addr, 0, 2, sr_addr },	/* setup read ptr */
+		{ client->addr, I2C_M_RD, 1, &sr }, 	/* read status */
+		{ client->addr, 0, 2, dt_addr },	/* setup read ptr */
+		{ client->addr, I2C_M_RD, 8, buf },	/* read date */
+	};
+
+	struct x1205_data *data = i2c_get_clientdata(client);
+
+	/* read status register */
+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+		return -EIO;
+	}
+
+	/* check for battery failure */
+	if (sr & X1205_SR_RTCF) {
+		dev_warn(&client->dev,
+			"Clock had a power failure, you must set the date.\n");
+		return -EINVAL;
+	}
+
+	/* read date registers */
+	if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+		return -EIO;
+	}
+
+	dev_dbg(&client->dev,
+		"%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
+		"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
+		__FUNCTION__,
+		buf[0], buf[1], buf[2], buf[3],
+		buf[4], buf[5], buf[6], buf[7]);
+
+	tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
+	tm->tm_min = BCD2BIN(buf[CCR_MIN]);
+	tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
+	tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
+	tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
+	data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
+	tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
+	tm->tm_wday = buf[CCR_WDAY];
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__FUNCTION__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return 0;
+}
+
+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
+				int datetoo, u8 reg_base)
+{
+	int i, err, xfer;
+
+	unsigned char buf[8];
+
+	static const unsigned char wel[3] = { 0, X1205_REG_SR,
+						X1205_SR_WEL };
+
+	static const unsigned char rwel[3] = { 0, X1205_REG_SR,
+						X1205_SR_WEL | X1205_SR_RWEL };
+
+	static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
+
+	struct x1205_data *data = i2c_get_clientdata(client);
+
+	/* check if all values in the tm struct are correct */
+	if ((err = x1205_validate_tm(tm)) < 0)
+		return err;
+
+	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__FUNCTION__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
+	buf[CCR_MIN] = BIN2BCD(tm->tm_min);
+
+	/* set hour and 24hr bit */
+	buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
+
+	/* should we also set the date? */
+	if (datetoo) {
+		buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
+
+		/* month, 0 - 11 */
+		buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
+
+		/* year, since 1900 */
+		buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
+		buf[CCR_WDAY] = tm->tm_wday & 0x07;
+		buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
+	}
+
+	/* this sequence is required to unlock the chip */
+	xfer = i2c_master_send(client, wel, 3);
+	if (xfer != 3) {
+		dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
+		return -EIO;
+	}
+
+	xfer = i2c_master_send(client, rwel, 3);
+	if (xfer != 3) {
+		dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
+		return -EIO;
+	}
+
+	/* write register's data */
+	for (i = 0; i < (datetoo ? 8 : 3); i++) {
+		unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
+
+		xfer = i2c_master_send(client, rdata, 3);
+		if (xfer != 3) {
+			dev_err(&client->dev,
+				"%s: xfer=%d addr=%02x, data=%02x\n",
+				__FUNCTION__,
+				 xfer, rdata[1], rdata[2]);
+			return -EIO;
+		}
+	};
+
+	/* disable further writes */
+	xfer = i2c_master_send(client, diswe, 3);
+	if (xfer != 3) {
+		dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
+{
+	unsigned char dtr;
+	static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
+
+	struct i2c_msg msgs[] = {
+		{ client->addr, 0, 2, dtr_addr },	/* setup read ptr */
+		{ client->addr, I2C_M_RD, 1, &dtr }, 	/* read dtr */
+	};
+
+	/* read dtr register */
+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+		return -EIO;
+	}
+
+	dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
+
+	*trim = 0;
+
+	if (dtr & X1205_DTR_DTR0)
+		*trim += 20;
+
+	if (dtr & X1205_DTR_DTR1)
+		*trim += 10;
+
+	if (dtr & X1205_DTR_DTR2)
+		*trim = -*trim;
+
+	return 0;
+}
+
+static int x1205_get_atrim(struct i2c_client *client, int *trim)
+{
+	s8 atr;
+	static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
+
+	struct i2c_msg msgs[] = {
+		{ client->addr, 0, 2, atr_addr },	/* setup read ptr */
+		{ client->addr, I2C_M_RD, 1, &atr }, 	/* read atr */
+	};
+
+	/* read atr register */
+	if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+		return -EIO;
+	}
+
+	dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
+
+	/* atr is a two's complement value on 6 bits,
+	 * perform sign extension. The formula is
+	 * Catr = (atr * 0.25pF) + 11.00pF.
+	 */
+	if (atr & 0x20)
+		atr |= 0xC0;
+
+	dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
+
+	*trim = (atr * 250) + 11000;
+
+	dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
+
+	return 0;
+}
+
+static int x1205_hctosys(struct i2c_client *client)
+{
+	int err;
+
+	struct rtc_time tm;
+	struct timespec tv;
+
+	err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
+
+	if (err) {
+		dev_err(&client->dev,
+			"Unable to set the system clock\n");
+		return err;
+	}
+
+	/* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
+	 * whether it stores the most close value or the value with partial
+	 * seconds truncated. However, it is important that we use it to store
+	 * the truncated value. This is because otherwise it is necessary,
+	 * in an rtc sync function, to read both xtime.tv_sec and
+	 * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
+	 * of >32bits is not possible. So storing the most close value would
+	 * slow down the sync API. So here we have the truncated value and
+	 * the best guess is to add 0.5s.
+	 */
+
+	tv.tv_nsec = NSEC_PER_SEC >> 1;
+
+	/* WARNING: this is not the C library 'mktime' call, it is a built in
+	 * inline function from include/linux/time.h.  It expects (requires)
+	 * the month to be in the range 1-12
+	 */
+
+	tv.tv_sec  = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
+				tm.tm_mday, tm.tm_hour,
+				tm.tm_min, tm.tm_sec);
+
+	do_settimeofday(&tv);
+
+	dev_info(&client->dev,
+		"setting the system clock to %d-%d-%d %d:%d:%d\n",
+		tm.tm_year + 1900, tm.tm_mon + 1,
+		tm.tm_mday, tm.tm_hour, tm.tm_min,
+		tm.tm_sec);
+
+	return 0;
+}
+
+struct x1205_limit
+{
+	unsigned char reg;
+	unsigned char mask;
+	unsigned char min;
+	unsigned char max;
+};
+
+static int x1205_validate_client(struct i2c_client *client)
+{
+	int i, xfer;
+
+	/* Probe array. We will read the register at the specified
+	 * address and check if the given bits are zero.
+	 */
+	static const unsigned char probe_zero_pattern[] = {
+		/* register, mask */
+		X1205_REG_SR,	0x18,
+		X1205_REG_DTR,	0xF8,
+		X1205_REG_ATR,	0xC0,
+		X1205_REG_INT,	0x18,
+		X1205_REG_0,	0xFF,
+	};
+
+	static const struct x1205_limit probe_limits_pattern[] = {
+		/* register, mask, min, max */
+		{ X1205_REG_Y2K,	0xFF,	19,	20	},
+		{ X1205_REG_DW,		0xFF,	0,	6	},
+		{ X1205_REG_YR,		0xFF,	0,	99	},
+		{ X1205_REG_MO,		0xFF,	0,	12	},
+		{ X1205_REG_DT,		0xFF,	0,	31	},
+		{ X1205_REG_HR,		0x7F,	0,	23	},
+		{ X1205_REG_MN,		0xFF,	0,	59	},
+		{ X1205_REG_SC,		0xFF,	0,	59	},
+		{ X1205_REG_Y2K1,	0xFF,	19,	20	},
+		{ X1205_REG_Y2K0,	0xFF,	19,	20	},
+	};
+
+	/* check that registers have bits a 0 where expected */
+	for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
+		unsigned char buf;
+
+		unsigned char addr[2] = { 0, probe_zero_pattern[i] };
+
+		struct i2c_msg msgs[2] = {
+			{ client->addr, 0, 2, addr },
+			{ client->addr, I2C_M_RD, 1, &buf },
+		};
+
+		xfer = i2c_transfer(client->adapter, msgs, 2);
+		if (xfer != 2) {
+			dev_err(&client->adapter->dev,
+				"%s: could not read register %x\n",
+				__FUNCTION__, addr[1]);
+
+			return -EIO;
+		}
+
+		if ((buf & probe_zero_pattern[i+1]) != 0) {
+			dev_err(&client->adapter->dev,
+				"%s: register=%02x, zero pattern=%d, value=%x\n",
+				__FUNCTION__, addr[1], i, buf);
+
+			return -ENODEV;
+		}
+	}
+
+	/* check limits (only registers with bcd values) */
+	for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
+		unsigned char reg, value;
+
+		unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
+
+		struct i2c_msg msgs[2] = {
+			{ client->addr, 0, 2, addr },
+			{ client->addr, I2C_M_RD, 1, &reg },
+		};
+
+		xfer = i2c_transfer(client->adapter, msgs, 2);
+
+		if (xfer != 2) {
+			dev_err(&client->adapter->dev,
+				"%s: could not read register %x\n",
+				__FUNCTION__, addr[1]);
+
+			return -EIO;
+		}
+
+		value = BCD2BIN(reg & probe_limits_pattern[i].mask);
+
+		if (value > probe_limits_pattern[i].max ||
+			value < probe_limits_pattern[i].min) {
+			dev_dbg(&client->adapter->dev,
+				"%s: register=%x, lim pattern=%d, value=%d\n",
+				__FUNCTION__, addr[1], i, value);
+
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static int x1205_attach(struct i2c_adapter *adapter)
+{
+	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+	return i2c_probe(adapter, &addr_data, x1205_probe);
+}
+
+int x1205_direct_attach(int adapter_id,
+	struct i2c_client_address_data *address_data)
+{
+	int err;
+	struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
+
+	if (adapter) {
+		err = i2c_probe(adapter,
+			address_data, x1205_probe);
+
+		i2c_put_adapter(adapter);
+
+		return err;
+	}
+
+	return -ENODEV;
+}
+
+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct x1205_data *data;
+
+	int err = 0;
+
+	dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	/* Initialize our structures */
+	data->epoch = 2000;
+
+	client = &data->client;
+	client->addr = address;
+	client->driver = &x1205_driver;
+	client->adapter	= adapter;
+
+	strlcpy(client->name, "x1205", I2C_NAME_SIZE);
+
+	i2c_set_clientdata(client, data);
+
+	/* Verify the chip is really an X1205 */
+	if (kind < 0) {
+		if (x1205_validate_client(client) < 0) {
+			err = -ENODEV;
+			goto exit_kfree;
+		}
+	}
+
+	/* Inform the i2c layer */
+	if ((err = i2c_attach_client(client)))
+		goto exit_kfree;
+
+	list_add(&data->list, &x1205_clients);
+
+	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+	/* If requested, set the system time */
+	if (hctosys)
+		x1205_hctosys(client);
+
+	return 0;
+
+exit_kfree:
+	kfree(data);
+
+exit:
+	return err;
+}
+
+static int x1205_detach(struct i2c_client *client)
+{
+	int err;
+	struct x1205_data *data = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+
+	if ((err = i2c_detach_client(client)))
+		return err;
+
+	list_del(&data->list);
+
+	kfree(data);
+
+	return 0;
+}
+
+static int x1205_command(struct i2c_client *client, unsigned int cmd,
+	void *param)
+{
+	if (param == NULL)
+		return -EINVAL;
+
+	if (!capable(CAP_SYS_TIME))
+		return -EACCES;
+
+	dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
+
+	switch (cmd) {
+	case X1205_CMD_GETDATETIME:
+		return x1205_get_datetime(client, param, X1205_CCR_BASE);
+
+	case X1205_CMD_SETTIME:
+		return x1205_set_datetime(client, param, 0,
+				X1205_CCR_BASE);
+
+	case X1205_CMD_SETDATETIME:
+		return x1205_set_datetime(client, param, 1,
+				X1205_CCR_BASE);
+
+	case X1205_CMD_GETALARM:
+		return x1205_get_datetime(client, param, X1205_ALM0_BASE);
+
+	case X1205_CMD_SETALARM:
+		return x1205_set_datetime(client, param, 1,
+				X1205_ALM0_BASE);
+
+	case X1205_CMD_GETDTRIM:
+		return x1205_get_dtrim(client, param);
+
+	case X1205_CMD_GETATRIM:
+		return x1205_get_atrim(client, param);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int __init x1205_init(void)
+{
+	return i2c_add_driver(&x1205_driver);
+}
+
+static void __exit x1205_exit(void)
+{
+	i2c_del_driver(&x1205_driver);
+}
+
+MODULE_AUTHOR(
+	"Karen Spearel <kas11@tampabay.rr.com>, "
+	"Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("Xicor X1205 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+EXPORT_SYMBOL_GPL(x1205_do_command);
+EXPORT_SYMBOL_GPL(x1205_direct_attach);
+
+module_init(x1205_init);
+module_exit(x1205_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 45aa0e54e29..02e335a04f0 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -19,7 +19,8 @@
 
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
    All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
-   SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com>                */
+   SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
+   Jean Delvare <khali@linux-fr.org> */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -85,6 +86,7 @@ void i2c_adapter_dev_release(struct device *dev)
 }
 
 struct device_driver i2c_adapter_driver = {
+	.owner = THIS_MODULE,
 	.name =	"i2c_adapter",
 	.bus = &i2c_bus_type,
 	.probe = i2c_device_probe,
@@ -98,6 +100,7 @@ static void i2c_adapter_class_dev_release(struct class_device *dev)
 }
 
 struct class i2c_adapter_class = {
+	.owner =	THIS_MODULE,
 	.name =		"i2c-adapter",
 	.release =	&i2c_adapter_class_dev_release,
 };
@@ -291,6 +294,7 @@ int i2c_add_driver(struct i2c_driver *driver)
 	down(&core_lists);
 
 	/* add the driver to the list of i2c drivers in the driver core */
+	driver->driver.owner = driver->owner;
 	driver->driver.name = driver->name;
 	driver->driver.bus = &i2c_bus_type;
 	driver->driver.probe = i2c_device_probe;
@@ -706,10 +710,6 @@ int i2c_probe(struct i2c_adapter *adapter,
 	int i, err;
 	int adap_id = i2c_adapter_id(adapter);
 
-	/* Forget it if we can't probe using SMBUS_QUICK */
-	if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK))
-		return -1;
-
 	/* Force entries are done first, and are not affected by ignore
 	   entries */
 	if (address_data->forces) {
@@ -736,6 +736,17 @@ int i2c_probe(struct i2c_adapter *adapter,
 		}
 	}
 
+	/* Stop here if we can't use SMBUS_QUICK */
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+		if (address_data->probe[0] == I2C_CLIENT_END
+		 && address_data->normal_i2c[0] == I2C_CLIENT_END)
+		 	return 0;
+
+		dev_warn(&adapter->dev, "SMBus Quick command not supported, "
+			 "can't probe for chips\n");
+		return -1;
+	}
+
 	/* Probe entries are done second, and are not affected by ignore
 	   entries either */
 	for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
@@ -820,101 +831,44 @@ crc8(u16 data)
 	return (u8)(data >> 8);
 }
 
-/* CRC over count bytes in the first array plus the bytes in the rest
-   array if it is non-null. rest[0] is the (length of rest) - 1
-   and is included. */
-static u8 i2c_smbus_partial_pec(u8 crc, int count, u8 *first, u8 *rest)
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
 {
 	int i;
 
 	for(i = 0; i < count; i++)
-		crc = crc8((crc ^ first[i]) << 8);
-	if(rest != NULL)
-		for(i = 0; i <= rest[0]; i++)
-			crc = crc8((crc ^ rest[i]) << 8);
+		crc = crc8((crc ^ p[i]) << 8);
 	return crc;
 }
 
-static u8 i2c_smbus_pec(int count, u8 *first, u8 *rest)
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
 {
-	return i2c_smbus_partial_pec(0, count, first, rest);
+	/* The address will be sent first */
+	u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD);
+	pec = i2c_smbus_pec(pec, &addr, 1);
+
+	/* The data buffer follows */
+	return i2c_smbus_pec(pec, msg->buf, msg->len);
 }
 
-/* Returns new "size" (transaction type)
-   Note that we convert byte to byte_data and byte_data to word_data
-   rather than invent new xxx_PEC transactions. */
-static int i2c_smbus_add_pec(u16 addr, u8 command, int size,
-			     union i2c_smbus_data *data)
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
 {
-	u8 buf[3];
-
-	buf[0] = addr << 1;
-	buf[1] = command;
-	switch(size) {
-		case I2C_SMBUS_BYTE:
-			data->byte = i2c_smbus_pec(2, buf, NULL);
-			size = I2C_SMBUS_BYTE_DATA;
-			break;
-		case I2C_SMBUS_BYTE_DATA:
-			buf[2] = data->byte;
-			data->word = buf[2] ||
-			            (i2c_smbus_pec(3, buf, NULL) << 8);
-			size = I2C_SMBUS_WORD_DATA;
-			break;
-		case I2C_SMBUS_WORD_DATA:
-			/* unsupported */
-			break;
-		case I2C_SMBUS_BLOCK_DATA:
-			data->block[data->block[0] + 1] =
-			             i2c_smbus_pec(2, buf, data->block);
-			size = I2C_SMBUS_BLOCK_DATA_PEC;
-			break;
-	}
-	return size;	
+	msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+	msg->len++;
 }
 
-static int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial,
-			       union i2c_smbus_data *data)
+/* Return <0 on CRC error
+   If there was a write before this read (most cases) we need to take the
+   partial CRC from the write part into account.
+   Note that this function does modify the message (we need to decrease the
+   message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
 {
-	u8 buf[3], rpec, cpec;
+	u8 rpec = msg->buf[--msg->len];
+	cpec = i2c_smbus_msg_pec(cpec, msg);
 
-	buf[1] = command;
-	switch(size) {
-		case I2C_SMBUS_BYTE_DATA:
-			buf[0] = (addr << 1) | 1;
-			cpec = i2c_smbus_pec(2, buf, NULL);
-			rpec = data->byte;
-			break;
-		case I2C_SMBUS_WORD_DATA:
-			buf[0] = (addr << 1) | 1;
-			buf[2] = data->word & 0xff;
-			cpec = i2c_smbus_pec(3, buf, NULL);
-			rpec = data->word >> 8;
-			break;
-		case I2C_SMBUS_WORD_DATA_PEC:
-			/* unsupported */
-			cpec = rpec = 0;
-			break;
-		case I2C_SMBUS_PROC_CALL_PEC:
-			/* unsupported */
-			cpec = rpec = 0;
-			break;
-		case I2C_SMBUS_BLOCK_DATA_PEC:
-			buf[0] = (addr << 1);
-			buf[2] = (addr << 1) | 1;
-			cpec = i2c_smbus_pec(3, buf, data->block);
-			rpec = data->block[data->block[0] + 1];
-			break;
-		case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
-			buf[0] = (addr << 1) | 1;
-			rpec = i2c_smbus_partial_pec(partial, 1,
-			                             buf, data->block);
-			cpec = data->block[data->block[0] + 1];
-			break;
-		default:
-			cpec = rpec = 0;
-			break;
-	}
 	if (rpec != cpec) {
 		pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
 			rpec, cpec);
@@ -941,9 +895,8 @@ s32 i2c_smbus_read_byte(struct i2c_client *client)
 
 s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
 {
-	union i2c_smbus_data data;	/* only for PEC */
 	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
-	                      I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data);
+	                      I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
 }
 
 s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
@@ -1026,13 +979,14 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 	  need to use only one message; when reading, we need two. We initialize
 	  most things with sane defaults, to keep the code below somewhat
 	  simpler. */
-	unsigned char msgbuf0[34];
-	unsigned char msgbuf1[34];
+	unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+	unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
 	int num = read_write == I2C_SMBUS_READ?2:1;
 	struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, 
 	                          { addr, flags | I2C_M_RD, 0, msgbuf1 }
 	                        };
 	int i;
+	u8 partial_pec = 0;
 
 	msgbuf0[0] = command;
 	switch(size) {
@@ -1075,7 +1029,6 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 		msgbuf0[2] = (data->word >> 8) & 0xff;
 		break;
 	case I2C_SMBUS_BLOCK_DATA:
-	case I2C_SMBUS_BLOCK_DATA_PEC:
 		if (read_write == I2C_SMBUS_READ) {
 			dev_err(&adapter->dev, "Block read not supported "
 			       "under I2C emulation!\n");
@@ -1088,23 +1041,20 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 				       data->block[0]);
 				return -1;
 			}
-			if(size == I2C_SMBUS_BLOCK_DATA_PEC)
-				(msg[0].len)++;
-			for (i = 1; i <= msg[0].len; i++)
+			for (i = 1; i < msg[0].len; i++)
 				msgbuf0[i] = data->block[i-1];
 		}
 		break;
 	case I2C_SMBUS_BLOCK_PROC_CALL:
-	case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
 		dev_dbg(&adapter->dev, "Block process call not supported "
 		       "under I2C emulation!\n");
 		return -1;
 	case I2C_SMBUS_I2C_BLOCK_DATA:
 		if (read_write == I2C_SMBUS_READ) {
-			msg[1].len = I2C_SMBUS_I2C_BLOCK_MAX;
+			msg[1].len = I2C_SMBUS_BLOCK_MAX;
 		} else {
 			msg[0].len = data->block[0] + 1;
-			if (msg[0].len > I2C_SMBUS_I2C_BLOCK_MAX + 1) {
+			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
 				dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with "
 				       "invalid block write size (%d)\n",
 				       data->block[0]);
@@ -1120,9 +1070,30 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 		return -1;
 	}
 
+	i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+				      && size != I2C_SMBUS_I2C_BLOCK_DATA);
+	if (i) {
+		/* Compute PEC if first message is a write */
+		if (!(msg[0].flags & I2C_M_RD)) {
+		 	if (num == 1) /* Write only */
+				i2c_smbus_add_pec(&msg[0]);
+			else /* Write followed by read */
+				partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+		}
+		/* Ask for PEC if last message is a read */
+		if (msg[num-1].flags & I2C_M_RD)
+		 	msg[num-1].len++;
+	}
+
 	if (i2c_transfer(adapter, msg, num) < 0)
 		return -1;
 
+	/* Check PEC if last message is a read */
+	if (i && (msg[num-1].flags & I2C_M_RD)) {
+		if (i2c_smbus_check_pec(partial_pec, &msg[num-1]) < 0)
+			return -1;
+	}
+
 	if (read_write == I2C_SMBUS_READ)
 		switch(size) {
 			case I2C_SMBUS_BYTE:
@@ -1137,8 +1108,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 				break;
 			case I2C_SMBUS_I2C_BLOCK_DATA:
 				/* fixed at 32 for now */
-				data->block[0] = I2C_SMBUS_I2C_BLOCK_MAX;
-				for (i = 0; i < I2C_SMBUS_I2C_BLOCK_MAX; i++)
+				data->block[0] = I2C_SMBUS_BLOCK_MAX;
+				for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
 					data->block[i+1] = msgbuf1[i];
 				break;
 		}
@@ -1151,28 +1122,8 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
                    union i2c_smbus_data * data)
 {
 	s32 res;
-	int swpec = 0;
-	u8 partial = 0;
 
 	flags &= I2C_M_TEN | I2C_CLIENT_PEC;
-	if((flags & I2C_CLIENT_PEC) &&
-	   !(i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HWPEC_CALC))) {
-		swpec = 1;
-		if(read_write == I2C_SMBUS_READ &&
-		   size == I2C_SMBUS_BLOCK_DATA)
-			size = I2C_SMBUS_BLOCK_DATA_PEC;
-		else if(size == I2C_SMBUS_PROC_CALL)
-			size = I2C_SMBUS_PROC_CALL_PEC;
-		else if(size == I2C_SMBUS_BLOCK_PROC_CALL) {
-			i2c_smbus_add_pec(addr, command,
-		                          I2C_SMBUS_BLOCK_DATA, data);
-			partial = data->block[data->block[0] + 1];
-			size = I2C_SMBUS_BLOCK_PROC_CALL_PEC;
-		} else if(read_write == I2C_SMBUS_WRITE &&
-		          size != I2C_SMBUS_QUICK &&
-		          size != I2C_SMBUS_I2C_BLOCK_DATA)
-			size = i2c_smbus_add_pec(addr, command, size, data);
-	}
 
 	if (adapter->algo->smbus_xfer) {
 		down(&adapter->bus_lock);
@@ -1183,13 +1134,6 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
 		res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
 	                                      command,size,data);
 
-	if(res >= 0 && swpec &&
-	   size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA &&
-	   (read_write == I2C_SMBUS_READ || size == I2C_SMBUS_PROC_CALL_PEC ||
-	    size == I2C_SMBUS_BLOCK_PROC_CALL_PEC)) {
-		if(i2c_smbus_check_pec(addr, command, size, partial, data))
-			return -1;
-	}
 	return res;
 }
 
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index aa7a4fadef6..ea14c8f1c82 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -26,15 +26,11 @@
 
 /* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
 
-/* The devfs code is contributed by Philipp Matthias Hahn 
-   <pmhahn@titan.lahn.de> */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
-#include <linux/devfs_fs_kernel.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c-dev.h>
@@ -80,10 +76,9 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)
 {
 	struct i2c_dev *i2c_dev;
 
-	i2c_dev = kmalloc(sizeof(*i2c_dev), GFP_KERNEL);
+	i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL);
 	if (!i2c_dev)
 		return ERR_PTR(-ENOMEM);
-	memset(i2c_dev, 0x00, sizeof(*i2c_dev));
 
 	spin_lock(&i2c_dev_array_lock);
 	if (i2c_dev_array[adap->nr]) {
@@ -177,8 +172,8 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file,
 	int i,datasize,res;
 	unsigned long funcs;
 
-	dev_dbg(&client->adapter->dev, "i2c-%d ioctl, cmd: 0x%x, arg: %lx.\n",
-		iminor(inode),cmd, arg);
+	dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n",
+		cmd, arg);
 
 	switch ( cmd ) {
 	case I2C_SLAVE:
@@ -432,8 +427,6 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap)
 	if (IS_ERR(i2c_dev))
 		return PTR_ERR(i2c_dev);
 
-	devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor),
-			S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor);
 	pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
 		 adap->name, i2c_dev->minor);
 
@@ -466,7 +459,6 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap)
 		return -ENODEV;
 
 	init_completion(&i2c_dev->released);
-	devfs_remove("i2c/%d", i2c_dev->minor);
 	return_i2c_dev(i2c_dev);
 	class_device_unregister(&i2c_dev->class_dev);
 	wait_for_completion(&i2c_dev->released);
@@ -522,8 +514,6 @@ static int __init i2c_dev_init(void)
 	if (res)
 		goto out_unreg_class;
 
-	devfs_mk_dir("i2c");
-
 	return 0;
 
 out_unreg_class:
@@ -539,7 +529,6 @@ static void __exit i2c_dev_exit(void)
 {
 	i2c_del_driver(&i2cdev_driver);
 	class_unregister(&i2c_dev_class);
-	devfs_remove("i2c");
 	unregister_chrdev(I2C_MAJOR,"i2c");
 }