Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...

3 files changed, 31 insertions, 28 deletions

diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 9aefb5e5864..86796488ef4 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -15,9 +15,9 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/hardware/ioc.h>
 #include <asm/system.h>
 
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index be8ee2cac8b..ece0125a1ee 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -193,22 +193,24 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 
 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 {
-	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
-		dev->iclk = clk_get(dev->dev, "i2c_ick");
-		if (IS_ERR(dev->iclk)) {
-			dev->iclk = NULL;
-			return -ENODEV;
-		}
+	int ret;
+
+	dev->iclk = clk_get(dev->dev, "ick");
+	if (IS_ERR(dev->iclk)) {
+		ret = PTR_ERR(dev->iclk);
+		dev->iclk = NULL;
+		return ret;
 	}
 
-	dev->fclk = clk_get(dev->dev, "i2c_fck");
+	dev->fclk = clk_get(dev->dev, "fck");
 	if (IS_ERR(dev->fclk)) {
+		ret = PTR_ERR(dev->fclk);
 		if (dev->iclk != NULL) {
 			clk_put(dev->iclk);
 			dev->iclk = NULL;
 		}
 		dev->fclk = NULL;
-		return -ENODEV;
+		return ret;
 	}
 
 	return 0;
@@ -218,18 +220,15 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 {
 	clk_put(dev->fclk);
 	dev->fclk = NULL;
-	if (dev->iclk != NULL) {
-		clk_put(dev->iclk);
-		dev->iclk = NULL;
-	}
+	clk_put(dev->iclk);
+	dev->iclk = NULL;
 }
 
 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 {
 	WARN_ON(!dev->idle);
 
-	if (dev->iclk != NULL)
-		clk_enable(dev->iclk);
+	clk_enable(dev->iclk);
 	clk_enable(dev->fclk);
 	dev->idle = 0;
 	if (dev->iestate)
@@ -254,8 +253,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 	}
 	dev->idle = 1;
 	clk_disable(dev->fclk);
-	if (dev->iclk != NULL)
-		clk_disable(dev->iclk);
+	clk_disable(dev->iclk);
 }
 
 static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -312,15 +310,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 
 	if (cpu_class_is_omap1()) {
-		struct clk *armxor_ck;
-
-		armxor_ck = clk_get(NULL, "armxor_ck");
-		if (IS_ERR(armxor_ck))
-			dev_warn(dev->dev, "Could not get armxor_ck\n");
-		else {
-			fclk_rate = clk_get_rate(armxor_ck);
-			clk_put(armxor_ck);
-		}
+		/*
+		 * The I2C functional clock is the armxor_ck, so there's
+		 * no need to get "armxor_ck" separately.  Now, if OMAP2420
+		 * always returns 12MHz for the functional clock, we can
+		 * do this bit unconditionally.
+		 */
+		fclk_rate = clk_get_rate(dev->fclk);
+
 		/* TRM for 5912 says the I2C clock must be prescaled to be
 		 * between 7 - 12 MHz. The XOR input clock is typically
 		 * 12, 13 or 19.2 MHz. So we should have code that produces:
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 4678babd3ce..fede619ba22 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -102,7 +102,13 @@ static int i2c_versatile_probe(struct platform_device *dev)
 	i2c->algo = i2c_versatile_algo;
 	i2c->algo.data = i2c;
 
-	ret = i2c_bit_add_bus(&i2c->adap);
+	if (dev->id >= 0) {
+		/* static bus numbering */
+		i2c->adap.nr = dev->id;
+		ret = i2c_bit_add_numbered_bus(&i2c->adap);
+	} else
+		/* dynamic bus numbering */
+		ret = i2c_bit_add_bus(&i2c->adap);
 	if (ret >= 0) {
 		platform_set_drvdata(dev, i2c);
 		return 0;
@@ -146,7 +152,7 @@ static void __exit i2c_versatile_exit(void)
 	platform_driver_unregister(&i2c_versatile_driver);
 }
 
-module_init(i2c_versatile_init);
+subsys_initcall(i2c_versatile_init);
 module_exit(i2c_versatile_exit);
 
 MODULE_DESCRIPTION("ARM Versatile I2C bus driver");