Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

105 files changed, 48392 insertions, 0 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
new file mode 100644
index 00000000000..24383afdda7
--- /dev/null
+++ b/drivers/i2c/Kconfig
@@ -0,0 +1,77 @@
+#
+# Character device configuration
+#
+
+menu "I2C support"
+
+config I2C
+	tristate "I2C support"
+	---help---
+	  I2C (pronounce: I-square-C) is a slow serial bus protocol used in
+	  many micro controller applications and developed by Philips.  SMBus,
+	  or System Management Bus is a subset of the I2C protocol.  More
+	  information is contained in the directory <file:Documentation/i2c/>,
+	  especially in the file called "summary" there.
+
+	  Both I2C and SMBus are supported here. You will need this for
+	  hardware sensors support, and also for Video For Linux support.
+
+	  If you want I2C support, you should say Y here and also to the
+	  specific driver for your bus adapter(s) below.
+
+	  This I2C support can also be built as a module.  If so, the module
+	  will be called i2c-core.
+
+config I2C_CHARDEV
+	tristate "I2C device interface"
+	depends on I2C
+	help
+	  Say Y here to use i2c-* device files, usually found in the /dev
+	  directory on your system.  They make it possible to have user-space
+	  programs use the I2C bus.  Information on how to do this is
+	  contained in the file <file:Documentation/i2c/dev-interface>.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-dev.
+
+source drivers/i2c/algos/Kconfig
+source drivers/i2c/busses/Kconfig
+source drivers/i2c/chips/Kconfig
+
+config I2C_DEBUG_CORE
+	bool "I2C Core debugging messages"
+	depends on I2C
+	help
+	  Say Y here if you want the I2C core to produce a bunch of debug
+	  messages to the system log.  Select this if you are having a
+	  problem with I2C support and want to see more of what is going on.
+
+config I2C_DEBUG_ALGO
+	bool "I2C Algorithm debugging messages"
+	depends on I2C
+	help
+	  Say Y here if you want the I2C algorithm drivers to produce a bunch
+	  of debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+config I2C_DEBUG_BUS
+	bool "I2C Bus debugging messages"
+	depends on I2C
+	help
+	  Say Y here if you want the I2C bus drivers to produce a bunch of
+	  debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+config I2C_DEBUG_CHIP
+	bool "I2C Chip debugging messages"
+	depends on I2C
+	help
+	  Say Y here if you want the I2C chip drivers to produce a bunch of
+	  debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+endmenu
+
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
new file mode 100644
index 00000000000..cd170395a8c
--- /dev/null
+++ b/drivers/i2c/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the i2c core.
+#
+
+obj-$(CONFIG_I2C)		+= i2c-core.o
+obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
+obj-$(CONFIG_I2C_SENSOR)	+= i2c-sensor.o
+obj-y				+= busses/ chips/ algos/
+
+i2c-sensor-objs := i2c-sensor-detect.o i2c-sensor-vid.o
+
+
+ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
new file mode 100644
index 00000000000..30408015d23
--- /dev/null
+++ b/drivers/i2c/algos/Kconfig
@@ -0,0 +1,70 @@
+#
+# Character device configuration
+#
+
+menu "I2C Algorithms"
+	depends on I2C
+
+config I2C_ALGOBIT
+	tristate "I2C bit-banging interfaces"
+	depends on I2C
+	help
+	  This allows you to use a range of I2C adapters called bit-banging
+	  adapters.  Say Y if you own an I2C adapter belonging to this class
+	  and then say Y to the specific driver for you adapter below.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-algo-bit.
+
+config I2C_ALGOPCF
+	tristate "I2C PCF 8584 interfaces"
+	depends on I2C
+	help
+	  This allows you to use a range of I2C adapters called PCF adapters.
+	  Say Y if you own an I2C adapter belonging to this class and then say
+	  Y to the specific driver for you adapter below.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-algo-pcf.
+
+config I2C_ALGOPCA
+	tristate "I2C PCA 9564 interfaces"
+	depends on I2C
+	help
+	  This allows you to use a range of I2C adapters called PCA adapters.
+	  Say Y if you own an I2C adapter belonging to this class and then say
+	  Y to the specific driver for you adapter below.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-algo-pca.
+
+config I2C_ALGOITE
+	tristate "ITE I2C Algorithm"
+	depends on MIPS_ITE8172 && I2C
+	help
+	  This supports the use of the ITE8172 I2C interface found on some MIPS
+	  systems. Say Y if you have one of these. You should also say Y for
+	  the ITE I2C peripheral driver support below.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-algo-ite.
+
+config I2C_ALGO8XX
+	tristate "MPC8xx CPM I2C interface"
+	depends on 8xx && I2C
+
+config I2C_ALGO_SIBYTE
+	tristate "SiByte SMBus interface"
+	depends on SIBYTE_SB1xxx_SOC && I2C
+	help
+	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+
+config I2C_ALGO_SGI
+	tristate "I2C SGI interfaces"
+	depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)
+	help
+	  Supports the SGI interfaces like the ones found on SGI Indy VINO
+	  or SGI O2 MACE.
+
+endmenu
+
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
new file mode 100644
index 00000000000..867fe1f6740
--- /dev/null
+++ b/drivers/i2c/algos/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the i2c algorithms
+#
+
+obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
+obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
+obj-$(CONFIG_I2C_ALGOPCA)	+= i2c-algo-pca.o
+obj-$(CONFIG_I2C_ALGOITE)	+= i2c-algo-ite.o
+obj-$(CONFIG_I2C_ALGO_SIBYTE)	+= i2c-algo-sibyte.o
+obj-$(CONFIG_I2C_ALGO_SGI)	+= i2c-algo-sgi.o
+
+ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
new file mode 100644
index 00000000000..fb5b732238e
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -0,0 +1,573 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-bit.c i2c driver algorithms for bit-shift adapters		     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki
+   <kmalkki@cc.hut.fi> and Jean Delvare <khali@linux-fr.org> */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+
+/* ----- global defines ----------------------------------------------- */
+#define DEB(x) if (i2c_debug>=1) x;
+#define DEB2(x) if (i2c_debug>=2) x;
+#define DEBSTAT(x) if (i2c_debug>=3) x; /* print several statistical values*/
+#define DEBPROTO(x) if (i2c_debug>=9) { x; }
+ 	/* debug the protocol by showing transferred bits */
+
+
+/* ----- global variables ---------------------------------------------	*/
+
+/* module parameters:
+ */
+static int i2c_debug;
+s