[PATCH] I2C: Add PXA I2C driver

Add support for the I2C PXA driver.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

1 files changed, 1031 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
new file mode 100644
index 00000000000..a72d2836529
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -0,0 +1,1031 @@
+/*
+ *  i2c_adap_pxa.c
+ *
+ *  I2C adapter for the PXA I2C bus access.
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *  Copyright (C) 2004-2005 Deep Blue Solutions Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  History:
+ *    Apr 2002: Initial version [CS]
+ *    Jun 2002: Properly seperated algo/adap [FB]
+ *    Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
+ *    Jan 2003: added limited signal handling [Kai-Uwe Bloem]
+ *    Sep 2004: Major rework to ensure efficient bus handling [RMK]
+ *    Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood]
+ *    Feb 2005: Rework slave mode handling [RMK]
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/i2c-pxa.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/arch/i2c.h>
+#include <asm/arch/pxa-regs.h>
+
+struct pxa_i2c {
+	spinlock_t		lock;
+	wait_queue_head_t	wait;
+	struct i2c_msg		*msg;
+	unsigned int		msg_num;
+	unsigned int		msg_idx;
+	unsigned int		msg_ptr;
+	unsigned int		slave_addr;
+
+	struct i2c_adapter	adap;
+#ifdef CONFIG_I2C_PXA_SLAVE
+	struct i2c_slave_client *slave;
+#endif
+
+	unsigned int		irqlogidx;
+	u32			isrlog[32];
+	u32			icrlog[32];
+};
+
+/*
+ * I2C Slave mode address
+ */
+#define I2C_PXA_SLAVE_ADDR      0x1
+
+/*
+ * Set this to zero to remove all debug statements via dead code elimination.
+ */
+#undef DEBUG
+
+#if 0
+#define DBGLVL KERN_INFO
+#else
+#define DBGLVL KERN_DEBUG
+#endif
+
+#ifdef DEBUG
+
+struct bits {
+	u32	mask;
+	const char *set;
+	const char *unset;
+};
+#define BIT(m, s, u)	{ .mask = m, .set = s, .unset = u }
+
+static inline void
+decode_bits(const char *prefix, const struct bits *bits, int num, u32 val)
+{
+	printk("%s %08x: ", prefix, val);
+	while (num--) {
+		const char *str = val & bits->mask ? bits->set : bits->unset;
+		if (str)
+			printk("%s ", str);
+		bits++;
+	}
+}
+
+static const struct bits isr_bits[] = {
+	BIT(ISR_RWM,	"RX",		"TX"),
+	BIT(ISR_ACKNAK,	"NAK",		"ACK"),
+	BIT(ISR_UB,	"Bsy",		"Rdy"),
+	BIT(ISR_IBB,	"BusBsy",	"BusRdy"),
+	BIT(ISR_SSD,	"SlaveStop",	NULL),
+	BIT(ISR_ALD,	"ALD",		NULL),
+	BIT(ISR_ITE,	"TxEmpty",	NULL),
+	BIT(ISR_IRF,	"RxFull",	NULL),
+	BIT(ISR_GCAD,	"GenCall",	NULL),
+	BIT(ISR_SAD,	"SlaveAddr",	NULL),
+	BIT(ISR_BED,	"BusErr",	NULL),
+};
+
+static void decode_ISR(unsigned int val)
+{
+	decode_bits(DBGLVL "ISR", isr_bits, ARRAY_SIZE(isr_bits), val);
+	printk("\n");
+}
+
+static const struct bits icr_bits[] = {
+	BIT(ICR_START,  "START",	NULL),
+	BIT(ICR_STOP,   "STOP",		NULL),
+	BIT(ICR_ACKNAK, "ACKNAK",	NULL),
+	BIT(ICR_TB,     "TB",		NULL),
+	BIT(ICR_MA,     "MA",		NULL),
+	BIT(ICR_SCLE,   "SCLE",		"scle"),
+	BIT(ICR_IUE,    "IUE",		"iue"),
+	BIT(ICR_GCD,    "GCD",		NULL),
+	BIT(ICR_ITEIE,  "ITEIE",	NULL),
+	BIT(ICR_IRFIE,  "IRFIE",	NULL),
+	BIT(ICR_BEIE,   "BEIE",		NULL),
+	BIT(ICR_SSDIE,  "SSDIE",	NULL),
+	BIT(ICR_ALDIE,  "ALDIE",	NULL),
+	BIT(ICR_SADIE,  "SADIE",	NULL),
+	BIT(ICR_UR,     "UR",		"ur"),
+};
+
+static void decode_ICR(unsigned int val)
+{
+	decode_bits(DBGLVL "ICR", icr_bits, ARRAY_SIZE(icr_bits), val);
+	printk("\n");
+}
+
+static unsigned int i2c_debug = DEBUG;
+
+static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
+{
+	printk(DBGLVL "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, ISR, ICR, IBMR);
+}
+
+#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __FUNCTION__)
+#else
+#define i2c_debug	0
+
+#define show_state(i2c) do { } while (0)
+#define decode_ISR(val) do { } while (0)
+#define decode_ICR(val) do { } while (0)
+#endif
+
+#define eedbg(lvl, x...) do { if ((lvl) < 1) { printk(DBGLVL "" x); } } while(0)
+
+static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
+
+static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
+{
+	unsigned int i;
+	printk("i2c: error: %s\n", why);
+	printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
+		i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
+	printk("i2c: ICR: %08x ISR: %08x\ni2c: log: ", ICR, ISR);
+	for (i = 0; i < i2c->irqlogidx; i++)
+		printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
+	printk("\n");
+}
+
+static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
+{
+	return !(ICR & ICR_SCLE);
+}
+
+static void i2c_pxa_abort(struct pxa_i2c *i2c)
+{
+	unsigned long timeout = jiffies + HZ/4;
+
+	if (i2c_pxa_is_slavemode(i2c)) {
+		printk(DBGLVL "i2c_pxa_transfer: called in slave mode\n");
+		return;
+	}
+
+	while (time_before(jiffies, timeout) && (IBMR & 0x1) == 0) {
+		unsigned long icr = ICR;
+
+		icr &= ~ICR_START;
+		icr |= ICR_ACKNAK | ICR_STOP | ICR_TB;
+
+		ICR = icr;
+
+		show_state(i2c);
+
+		msleep(1);
+	}
+
+	ICR &= ~(ICR_MA | ICR_START | ICR_STOP);
+}
+
+static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
+{
+	int timeout = DEF_TIMEOUT;
+
+	while (timeout-- && ISR & (ISR_IBB | ISR_UB)) {
+		if ((ISR & ISR_SAD) != 0)
+			timeout += 4;
+
+		msleep(2);
+		show_state(i2c);
+	}
+
+	if (timeout <= 0)
+		show_state(i2c);
+
+	return timeout <= 0 ? I2C_RETRY : 0;
+}
+
+static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
+{
+	unsigned long timeout = jiffies + HZ*4;
+
+	while (time_before(jiffies, timeout)) {
+		if (i2c_debug > 1)
+			printk(DBGLVL "i2c_pxa_wait_master: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
+			       (long)jiffies, ISR, ICR, IBMR);
+
+		if (ISR & ISR_SAD) {
+			if (i2c_debug > 0)
+				printk(DBGLVL "i2c_pxa_wait_master: Slave detected\n");
+			goto out;
+		}
+
+		/* wait for unit and bus being not busy, and we also do a
+		 * quick check of the i2c lines themselves to ensure they've
+		 * gone high...
+		 */
+		if ((ISR & (ISR_UB | ISR_IBB)) == 0 && IBMR == 3) {
+			if (i2c_debug > 0)
+				printk(DBGLVL "i2c_pxa_wait_master: done\n");
+			return 1;
+		}
+
+		msleep(1);
+	}
+
+	if (i2c_debug > 0)
+		printk(DBGLVL "i2c_pxa_wait_master: did not free\n");
+ out:
+	return 0;
+}
+
+static int i2c_pxa_set_master(struct pxa_i2c *i2c)
+{
+	if (i2c_debug)
+		printk(DBGLVL "I2C: setting to bus master\n");
+
+	if ((ISR & (ISR_UB | ISR_IBB)) != 0) {
+		printk(DBGLVL "set_master: unit is busy\n");
+		if (!i2c_pxa_wait_master(i2c)) {
+			printk(DBGLVL "set_master: error: unit busy\n");
+			return I2C_RETRY;
+		}
+	}
+
+	ICR |= ICR_SCLE;
+	return 0;
+}
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+static int i2c_pxa_wait_slave(struct pxa_i2c *i2c)
+{
+	unsigned long timeout = jiffies + HZ*1;
+
+	/* wait for stop */
+
+	show_state(i2c);
+
+	while (time_before(jiffies, timeout)) {
+		if (i2c_debug > 1)
+			printk(DBGLVL "i2c_pxa_wait_slave: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
+			       (long)jiffies, ISR, ICR, IBMR);
+
+		if ((ISR & (ISR_UB|ISR_IBB|ISR_SAD)) == ISR_SAD ||
+		    (ICR & ICR_SCLE) == 0) {
+			if (i2c_debug > 1)
+				printk(DBGLVL "i2c_pxa_wait_slave: done\n");
+			return 1;
+		}
+
+		msleep(1);
+	}
+
+	if (i2c_debug > 0)
+		printk(DBGLVL "i2c_pxa_wait_slave: did not free\n");
+	return 0;
+}
+
+/*
+ * clear the hold on the bus, and take of anything else
+ * that has been configured
+ */
+static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode)
+{
+	show_state(i2c);
+
+	if (errcode < 0) {
+		udelay(100);   /* simple delay */
+	} else {
+		/* we need to wait for the stop condition to end */
+
+		/* if we where in stop, then clear... */
+		if (ICR & ICR_STOP) {
+			udelay(100);
+			ICR &= ~ICR_STOP;
+		}
+
+		if (!i2c_pxa_wait_slave(i2c)) {
+			printk(KERN_ERR "i2c_pxa_set_slave: wait timedout\n");
+			return;
+		}
+	}
+
+	ICR &= ~(ICR_STOP|ICR_ACKNAK|ICR_MA);
+	ICR &= ~ICR_SCLE;
+
+	if (i2c_debug) {
+		printk(DBGLVL "ICR now %08x, ISR %08x\n", ICR, ISR);
+		decode_ICR(ICR);
+	}
+}
+#else
+#define i2c_pxa_set_slave(i2c, err)	do { } while (0)
+#endif
+
+static void i2c_pxa_reset(struct pxa_i2c *i2c)
+{
+	pr_debug("Resetting I2C Controller Unit\n");
+
+	/* abort any transfer currently under way */
+	i2c_pxa_abort(i2c);
+
+	/* reset according to 9.8 */
+	ICR = ICR_UR;
+	ISR = I2C_ISR_INIT;
+	ICR &= ~ICR_UR;
+
+	ISAR = i2c->slave_addr;
+
+	/* set control register values */
+	ICR = I2C_ICR_INIT;
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+	printk(KERN_INFO "I2C: Enabling slave mode\n");
+	ICR |= ICR_SADIE | ICR_ALDIE | ICR_SSDIE;
+#endif
+
+	i2c_pxa_set_slave(i2c, 0);
+
+	/* enable unit */
+	ICR |= ICR_IUE;
+	udelay(100);
+}
+
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+/*
+ * I2C EEPROM emulation.
+ */
+static struct i2c_eeprom_emu eeprom = {
+	.size = I2C_EEPROM_EMU_SIZE,
+	.watch = LIST_HEAD_INIT(eeprom.watch),
+};
+
+struct i2c_eeprom_emu *i2c_pxa_get_eeprom(void)
+{
+	return &eeprom;
+}
+
+int i2c_eeprom_emu_addwatcher(struct i2c_eeprom_emu *emu, void *data,
+			      unsigned int addr, unsigned int size,
+			      struct i2c_eeprom_emu_watcher *watcher)
+{
+	struct i2c_eeprom_emu_watch *watch;
+	unsigned long flags;
+
+	if (addr + size > emu->size)
+		return -EINVAL;
+
+	watch = kmalloc(sizeof(struct i2c_eeprom_emu_watch), GFP_KERNEL);
+	if (watch) {
+		watch->start = addr;
+		watch->end = addr + size - 1;
+		watch->ops = watcher;
+		watch->data = data;
+
+		local_irq_save(flags);
+		list_add(&watch->node, &emu->watch);
+		local_irq_restore(flags);
+	}
+
+	return watch ? 0 : -ENOMEM;
+}
+
+void i2c_eeprom_emu_delwatcher(struct i2c_eeprom_emu *emu, void *data,
+			       struct i2c_eeprom_emu_watcher *watcher)
+{
+	struct i2c_eeprom_emu_watch *watch, *n;
+	unsigned long flags;
+
+	list_for_each_entry_safe(watch, n, &emu->watch, node) {
+		if (watch->ops == watcher && watch->data == data) {
+			local_irq_save(flags);
+			list_del(&watch->node);
+			local_irq_restore(flags);
+			kfree(watch);
+		}
+	}
+}
+
+static void i2c_eeprom_emu_event(void *ptr, i2c_slave_event_t event)
+{
+	struct i2c_eeprom_emu *emu = ptr;
+
+	eedbg(3, "i2c_eeprom_emu_event: %d\n", event);
+
+	switch (event) {
+	case I2C_SLAVE_EVENT_START_WRITE:
+		emu->seen_start = 1;
+		eedbg(2, "i2c_eeprom: write initiated\n");
+		break;
+
+	case I2C_SLAVE_EVENT_START_READ:
+		emu->seen_start = 0;
+		eedbg(2, "i2c_eeprom: read initiated\n");
+		break;
+
+	case I2C_SLAVE_EVENT_STOP:
+		emu->seen_start = 0;
+		eedbg(2, "i2c_eeprom: received stop\n");
+		break;
+
+	default:
+		eedbg(0, "i2c_eeprom: unhandled event\n");
+		break;
+	}
+}
+
+static int i2c_eeprom_emu_read(void *ptr)
+{
+	struct i2c_eeprom_emu *emu = ptr;
+	int ret;
+
+	ret = emu->bytes[emu->ptr];
+	emu->ptr = (emu->ptr + 1) % emu->size;
+
+	return ret;
+}
+
+static void i2c_eeprom_emu_write(void *ptr, unsigned int val)
+{
+	struct i2c_eeprom_emu *emu = ptr;
+	struct i2c_eeprom_emu_watch *watch;
+
+	if (emu->seen_start != 0) {
+		eedbg(2, "i2c_eeprom_emu_write: setting ptr %02x\n", val);
+		emu->ptr = val;
+		emu->seen_start = 0;
+		return;
+	}
+
+	emu->bytes[emu->ptr] = val;
+
+	eedbg(1, "i2c_eeprom_emu_write: ptr=0x%02x, val=0x%02x\n",
+	      emu->ptr, val);
+
+	list_for_each_entry(watch, &emu->watch, node) {
+		if (!watch->ops || !watch->ops->write)
+			continue;
+		if (watch->start <= emu->ptr && watch->end >= emu->ptr)
+			watch->ops->write(watch->data, emu->ptr, val);
+	}
+
+	emu->ptr = (emu->ptr + 1) % emu->size;
+}
+
+struct i2c_slave_client eeprom_client = {
+	.data	= &eeprom,
+	.event	= i2c_eeprom_emu_event,
+	.read	= i2c_eeprom_emu_read,
+	.write	= i2c_eeprom_emu_write
+};
+
+/*
+ * PXA I2C Slave mode
+ */
+
+static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
+{
+	if (isr & ISR_BED) {
+		/* what should we do here? */
+	} else {
+		int ret = i2c->slave->read(i2c->slave->data);
+
+		IDBR = ret;
+		ICR |= ICR_TB;   /* allow next byte */
+	}
+}
+
+static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
+{
+	unsigned int byte = IDBR;
+
+	if (i2c->slave != NULL)
+		i2c->slave->write(i2c->slave->data, byte);
+
+	ICR |= ICR_TB;
+}
+
+static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
+{
+	int timeout;
+
+	if (i2c_debug > 0)
+		printk(DBGLVL "I2C: SAD, mode is slave-%cx\n",
+		       (isr & ISR_RWM) ? 'r' : 't');
+
+	if (i2c->slave != NULL)
+		i2c->slave->event(i2c->slave->data,
+				 (isr & ISR_RWM) ? I2C_SLAVE_EVENT_START_READ : I2C_SLAVE_EVENT_START_WRITE);
+
+	/*
+	 * slave could interrupt in the middle of us generating a
+	 * start condition... if this happens, we'd better back off
+	 * and stop holding the poor thing up
+	 */
+	ICR &= ~(ICR_START|ICR_STOP);
+	ICR |= ICR_TB;
+
+	timeout = 0x10000;
+
+	while (1) {
+		if ((IBMR & 2) == 2)
+			break;
+
+		timeout--;
+
+		if (timeout <= 0) {
+			printk(KERN_ERR "timeout waiting for SCL high\n");
+			break;
+		}
+	}
+
+	ICR &= ~ICR_SCLE;
+}
+
+static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
+{
+	if (i2c_debug > 2)
+		printk(DBGLVL "ISR: SSD (Slave Stop)\n");
+
+	if (i2c->slave != NULL)
+		i2c->slave->event(i2c->slave->data, I2C_SLAVE_EVENT_STOP);
+
+	if (i2c_debug > 2)
+		printk(DBGLVL "ISR: SSD (Slave Stop) acked\n");
+
+	/*
+	 * If we have a master-mode message waiting,
+	 * kick it off now that the slave has completed.
+	 */
+	if (i2c->msg)
+		i2c_pxa_master_complete(i2c, I2C_RETRY);
+}
+#else
+static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
+{
+	if (isr & ISR_BED) {
+		/* what should we do here? */
+	} else {
+		IDBR = 0;
+		ICR |= ICR_TB;
+	}
+}
+
+static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
+{
+	ICR |= ICR_TB | ICR_ACKNAK;
+}
+
+static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
+{
+	int timeout;
+
+	/*
+	 * slave could interrupt in the middle of us generating a
+	 * start condition... if this happens, we'd better back off
+	 * and stop holding the poor thing up
+	 */
+	ICR &= ~(ICR_START|ICR_STOP);
+	ICR |= ICR_TB | ICR_ACKNAK;
+
+	timeout = 0x10000;
+
+	while (1) {
+		if ((IBMR & 2) == 2)
+			break;
+
+		timeout--;
+
+		if (timeout <= 0) {
+			printk(KERN_ERR "timeout waiting for SCL high\n");
+			break;
+		}
+	}
+
+	ICR &= ~ICR_SCLE;
+}
+
+static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
+{
+	if (i2c->msg)
+		i2c_pxa_master_complete(i2c, I2C_RETRY);
+}
+#endif
+
+/*
+ * PXA I2C Master mode
+ */
+
+static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg)
+{
+	unsigned int addr = (msg->addr & 0x7f) << 1;
+
+	if (msg->flags & I2C_M_RD)
+		addr |= 1;
+
+	return addr;
+}
+
+static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
+{
+	u32 icr;
+
+	/*
+	 * Step 1: target slave address into IDBR
+	 */
+	IDBR = i2c_pxa_addr_byte(i2c->msg);
+
+	/*
+	 * Step 2: initiate the write.
+	 */
+	icr = ICR & ~(ICR_STOP | ICR_ALDIE);
+	ICR = icr | ICR_START | ICR_TB;
+}
+
+/*
+ * We are protected by the adapter bus semaphore.
+ */
+static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
+{
+	long timeout;
+	int ret;
+
+	/*
+	 * Wait for the bus to become free.
+	 */
+	ret = i2c_pxa_wait_bus_not_busy(i2c);
+	if (ret) {
+		printk(KERN_INFO "i2c_pxa: timeout waiting for bus free\n");
+		goto out;
+	}
+
+	/*
+	 * Set master mode.
+	 */
+	ret = i2c_pxa_set_master(i2c);
+	if (ret) {
+		printk(KERN_INFO "i2c_pxa_set_master: error %d\n", ret);
+		goto out;
+	}
+
+	spin_lock_irq(&i2c->lock);
+
+	i2c->msg = msg;
+	i2c->msg_num = num;
+	i2c->msg_idx = 0;
+	i2c->msg_ptr = 0;
+	i2c->irqlogidx = 0;
+
+	i2c_pxa_start_message(i2c);
+
+	spin_unlock_irq(&i2c->lock);
+
+	/*
+	 * The rest of the processing occurs in the interrupt handler.
+	 */
+	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
+
+	/*
+	 * We place the return code in i2c->msg_idx.
+	 */
+	ret = i2c->msg_idx;
+
+	if (timeout == 0)
+		i2c_pxa_scream_blue_murder(i2c, "timeout");
+
+ out:
+	return ret;
+}
+
+/*
+ * i2c_pxa_master_complete - complete the message and wake up.
+ */
+static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret)
+{
+	i2c->msg_ptr = 0;
+	i2c->msg = NULL;
+	i2c->msg_idx ++;
+	i2c->msg_num = 0;
+	if (ret)
+		i2c->msg_idx = ret;
+	wake_up(&i2c->wait);
+}
+
+static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
+{
+	u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+
+ again:
+	/*
+	 * If ISR_ALD is set, we lost arbitration.
+	 */
+	if (isr & ISR_ALD) {
+		/*
+		 * Do we need to do anything here?  The PXA docs
+		 * are vague about what happens.
+		 */
+		i2c_pxa_scream_blue_murder(i2c, "ALD set");
+
+		/*
+		 * We ignore this error.  We seem to see spurious ALDs
+		 * for seemingly no reason.  If we handle them as I think
+		 * they should, we end up causing an I2C error, which
+		 * is painful for some systems.
+		 */
+		return; /* ignore */
+	}
+
+	if (isr & ISR_BED) {
+		int ret = BUS_ERROR;
+
+		/*
+		 * I2C bus error - either the device NAK'd us, or
+		 * something more serious happened.  If we were NAK'd
+		 * on the initial address phase, we can retry.
+		 */
+		if (isr & ISR_ACKNAK) {
+			if (i2c->msg_ptr == 0 && i2c->msg_idx == 0)
+				ret = I2C_RETRY;
+			else
+				ret = XFER_NAKED;
+		}
+		i2c_pxa_master_complete(i2c, ret);
+	} else if (isr & ISR_RWM) {
+		/*
+		 * Read mode.  We have just sent the address byte, and
+		 * now we must initiate the transfer.
+		 */
+		if (i2c->msg_ptr == i2c->msg->len - 1 &&
+		    i2c->msg_idx == i2c->msg_num - 1)
+			icr |= ICR_STOP | ICR_ACKNAK;
+
+		icr |= ICR_ALDIE | ICR_TB;
+	} else if (i2c->msg_ptr < i2c->msg->len) {
+		/*
+		 * Write mode.  Write the next data byte.
+		 */
+		IDBR = i2c->msg->buf[i2c->msg_ptr++];
+
+		icr |= ICR_ALDIE | ICR_TB;
+
+		/*
+		 * If this is the last byte of the last message, send
+		 * a STOP.
+		 */
+		if (i2c->msg_ptr == i2c->msg->len &&
+		    i2c->msg_idx == i2c->msg_num - 1)
+			icr |= ICR_STOP;
+	} else if (i2c->msg_idx < i2c->msg_num - 1) {
+		/*
+		 * Next segment of the message.
+		 */
+		i2c->msg_ptr = 0;
+		i2c->msg_idx ++;
+		i2c->msg++;
+
+		/*
+		 * If we aren't doing a repeated start and address,
+		 * go back and try to send the next byte.  Note that
+		 * we do not support switching the R/W direction here.
+		 */
+		if (i2c->msg->flags & I2C_M_NOSTART)
+			goto again;
+
+		/*
+		 * Write the next address.
+		 */
+		IDBR = i2c_pxa_addr_byte(i2c->msg);
+
+		/*
+		 * And trigger a repeated start, and send the byte.
+		 */
+		icr &= ~ICR_ALDIE;
+		icr |= ICR_START | ICR_TB;
+	} else {
+		if (i2c->msg->len == 0) {
+			/*
+			 * Device probes have a message length of zero
+			 * and need the bus to be reset before it can
+			 * be used again.
+			 */
+			i2c_pxa_reset(i2c);
+		}
+		i2c_pxa_master_complete(i2c, 0);
+	}
+
+	i2c->icrlog[i2c->irqlogidx-1] = icr;
+
+	ICR = icr;
+	show_state(i2c);
+}
+
+static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
+{
+	u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+
+	/*
+	 * Read the byte.
+	 */
+	i2c->msg->buf[i2c->msg_ptr++] = IDBR;
+
+	if (i2c->msg_ptr < i2c->msg->len) {
+		/*
+		 * If this is the last byte of the last
+		 * message, send a STOP.
+		 */
+		if (i2c->msg_ptr == i2c->msg->len - 1)
+			icr |= ICR_STOP | ICR_ACKNAK;
+
+		icr |= ICR_ALDIE | ICR_TB;
+	} else {
+		i2c_pxa_master_complete(i2c, 0);
+	}
+
+	i2c->icrlog[i2c->irqlogidx-1] = icr;
+
+	ICR = icr;
+}
+
+static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id, struct pt_regs *regs)
+{
+	struct pxa_i2c *i2c = dev_id;
+	u32 isr = ISR;
+
+	if (i2c_debug > 2 && 0) {
+		printk(DBGLVL "i2c_pxa_handler: ISR=%08x, ICR=%08x, IBMR=%02x\n",
+		       isr, ICR, IBMR);
+		decode_ISR(isr);
+	}
+
+	if (i2c->irqlogidx < sizeof(i2c->isrlog)/sizeof(u32))
+		i2c->isrlog[i2c->irqlogidx++] = isr;
+
+	show_state(i2c);
+
+	/*
+	 * Always clear all pending IRQs.
+	 */
+	ISR = isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED);
+
+	if (isr & ISR_SAD)
+		i2c_pxa_slave_start(i2c, isr);
+	if (isr & ISR_SSD)
+		i2c_pxa_slave_stop(i2c);
+
+	if (i2c_pxa_is_slavemode(i2c)) {
+		if (isr & ISR_ITE)
+			i2c_pxa_slave_txempty(i2c, isr);
+		if (isr & ISR_IRF)
+			i2c_pxa_slave_rxfull(i2c, isr);
+	} else if (i2c->msg) {
+		if (isr & ISR_ITE)
+			i2c_pxa_irq_txempty(i2c, isr);
+		if (isr & ISR_IRF)
+			i2c_pxa_irq_rxfull(i2c, isr);
+	} else {
+		i2c_pxa_scream_blue_murder(i2c, "spurious irq");
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct pxa_i2c *i2c = adap->algo_data;
+	int ret, i;
+
+	for (i = adap->retries; i >= 0; i--) {
+		ret = i2c_pxa_do_xfer(i2c, msgs, num);
+		if (ret != I2C_RETRY)
+			goto out;
+
+		if (i2c_debug)
+			printk(KERN_INFO "Retrying transmission\n");
+		udelay(100);
+	}
+	i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
+	ret = -EREMOTEIO;
+ out:
+	i2c_pxa_set_slave(i2c, ret);
+	return ret;
+}
+
+static struct i2c_algorithm i2c_pxa_algorithm = {
+	.name		= "PXA-I2C-Algorithm",
+	.id		= I2C_ALGO_PXA,
+	.master_xfer	= i2c_pxa_xfer,
+};
+
+static struct pxa_i2c i2c_pxa = {
+	.lock	= SPIN_LOCK_UNLOCKED,
+	.wait	= __WAIT_QUEUE_HEAD_INITIALIZER(i2c_pxa.wait),
+	.adap	= {
+		.name		= "pxa2xx-i2c",
+		.id		= I2C_ALGO_PXA,
+		.algo		= &i2c_pxa_algorithm,
+		.retries	= 5,
+	},
+};
+
+static int i2c_pxa_probe(struct device *dev)
+{
+	struct pxa_i2c *i2c = &i2c_pxa;
+	struct i2c_pxa_platform_data *plat = dev->platform_data;
+	int ret;
+
+#ifdef CONFIG_PXA27x
+	pxa_gpio_mode(GPIO117_I2CSCL_MD);
+	pxa_gpio_mode(GPIO118_I2CSDA_MD);
+	udelay(100);
+#endif
+
+	i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+	i2c->slave = &eeprom_client;
+	if (plat) {
+		i2c->slave_addr = plat->slave_addr;
+		if (plat->slave)
+			i2c->slave = plat->slave;
+	}
+#endif
+
+	pxa_set_cken(CKEN14_I2C, 1);
+	ret = request_irq(IRQ_I2C, i2c_pxa_handler, SA_INTERRUPT,
+			  "pxa2xx-i2c", i2c);
+	if (ret)
+		goto out;
+
+	i2c_pxa_reset(i2c);
+
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = dev;
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		printk(KERN_INFO "I2C: Failed to add bus\n");
+		goto err_irq;
+	}
+
+	dev_set_drvdata(dev, i2c);
+
+#ifdef CONFIG_I2C_PXA_SLAVE
+	printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n",
+	       i2c->adap.dev.bus_id, i2c->slave_addr);
+#else
+	printk(KERN_INFO "I2C: %s: PXA I2C adapter\n",
+	       i2c->adap.dev.bus_id);
+#endif
+	return 0;
+
+ err_irq:
+	free_irq(IRQ_I2C, i2c);
+ out:
+	return ret;
+}
+
+static int i2c_pxa_remove(struct device *dev)
+{
+	struct pxa_i2c *i2c = dev_get_drvdata(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	i2c_del_adapter(&i2c->adap);
+	free_irq(IRQ_I2C, i2c);
+	pxa_set_cken(CKEN14_I2C, 0);
+
+	return 0;
+}
+
+static struct device_driver i2c_pxa_driver = {
+	.name		= "pxa2xx-i2c",
+	.bus		= &platform_bus_type,
+	.probe		= i2c_pxa_probe,
+	.remove		= i2c_pxa_remove,
+};
+
+static int __init i2c_adap_pxa_init(void)
+{
+	return driver_register(&i2c_pxa_driver);
+}
+
+static void i2c_adap_pxa_exit(void)
+{
+	return driver_unregister(&i2c_pxa_driver);
+}
+
+module_init(i2c_adap_pxa_init);
+module_exit(i2c_adap_pxa_exit);