hwmon: (adm1275) Add support for ADM1075

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

2 files changed, 86 insertions, 6 deletions

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 1f0d0110b6b..9246d0154f7 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -31,8 +31,8 @@ config SENSORS_ADM1275
 	default n
 	help
 	  If you say yes here you get hardware monitoring support for Analog
-	  Devices ADM1275 and ADM1276 Hot-Swap Controller and Digital Power
-	  Monitor.
+	  Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
+	  Power Monitors.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called adm1275.
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 5e4421e57eb..60aad9570f0 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -23,7 +23,7 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
-enum chips { adm1275, adm1276 };
+enum chips { adm1075, adm1275, adm1276 };
 
 #define ADM1275_PEAK_IOUT		0xd0
 #define ADM1275_PEAK_VIN		0xd1
@@ -32,6 +32,9 @@ enum chips { adm1275, adm1276 };
 
 #define ADM1275_VIN_VOUT_SELECT		(1 << 6)
 #define ADM1275_VRANGE			(1 << 5)
+#define ADM1075_IRANGE_50		(1 << 4)
+#define ADM1075_IRANGE_25		(1 << 3)
+#define ADM1075_IRANGE_MASK		((1 << 3) | (1 << 4))
 
 #define ADM1275_IOUT_WARN2_LIMIT	0xd7
 #define ADM1275_DEVICE_CONFIG		0xd8
@@ -42,6 +45,14 @@ enum chips { adm1275, adm1276 };
 
 #define ADM1275_MFR_STATUS_IOUT_WARN2	(1 << 0)
 
+#define ADM1075_READ_VAUX		0xdd
+#define ADM1075_VAUX_OV_WARN_LIMIT	0xde
+#define ADM1075_VAUX_UV_WARN_LIMIT	0xdf
+#define ADM1075_VAUX_STATUS		0xf6
+
+#define ADM1075_VAUX_OV_WARN		(1<<7)
+#define ADM1075_VAUX_UV_WARN		(1<<6)
+
 struct adm1275_data {
 	int id;
 	bool have_oc_fault;
@@ -74,6 +85,29 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 		}
 		ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
 		break;
+	case PMBUS_VOUT_OV_WARN_LIMIT:
+		if (data->id != adm1075) {
+			ret = -ENODATA;
+			break;
+		}
+		ret = pmbus_read_word_data(client, 0,
+					   ADM1075_VAUX_OV_WARN_LIMIT);
+		break;
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+		if (data->id != adm1075) {
+			ret = -ENODATA;
+			break;
+		}
+		ret = pmbus_read_word_data(client, 0,
+					   ADM1075_VAUX_UV_WARN_LIMIT);
+		break;
+	case PMBUS_READ_VOUT:
+		if (data->id != adm1075) {
+			ret = -ENODATA;
+			break;
+		}
+		ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
+		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
 		break;
@@ -84,7 +118,7 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
 		break;
 	case PMBUS_VIRT_READ_PIN_MAX:
-		if (data->id != adm1276) {
+		if (data->id == adm1275) {
 			ret = -ENXIO;
 			break;
 		}
@@ -95,7 +129,7 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 	case PMBUS_VIRT_RESET_VIN_HISTORY:
 		break;
 	case PMBUS_VIRT_RESET_PIN_HISTORY:
-		if (data->id != adm1276)
+		if (data->id == adm1275)
 			ret = -ENXIO;
 		break;
 	default:
@@ -163,6 +197,19 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
 			  PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
 		}
 		break;
+	case PMBUS_STATUS_VOUT:
+		if (data->id != adm1075) {
+			ret = -ENODATA;
+			break;
+		}
+		ret = 0;
+		mfr_status = pmbus_read_byte_data(client, 0,
+						  ADM1075_VAUX_STATUS);
+		if (mfr_status & ADM1075_VAUX_OV_WARN)
+			ret |= PB_VOLTAGE_OV_WARNING;
+		if (mfr_status & ADM1075_VAUX_UV_WARN)
+			ret |= PB_VOLTAGE_UV_WARNING;
+		break;
 	default:
 		ret = -ENODATA;
 		break;
@@ -171,6 +218,7 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
 }
 
 static const struct i2c_device_id adm1275_id[] = {
+	{ "adm1075", adm1075 },
 	{ "adm1275", adm1275 },
 	{ "adm1276", adm1276 },
 	{ }
@@ -251,7 +299,14 @@ static int adm1275_probe(struct i2c_client *client,
 	info->read_byte_data = adm1275_read_byte_data;
 	info->write_word_data = adm1275_write_word_data;
 
-	if (config & ADM1275_VRANGE) {
+	if (data->id == adm1075) {
+		info->m[PSC_VOLTAGE_IN] = 27169;
+		info->b[PSC_VOLTAGE_IN] = 0;
+		info->R[PSC_VOLTAGE_IN] = -1;
+		info->m[PSC_VOLTAGE_OUT] = 27169;
+		info->b[PSC_VOLTAGE_OUT] = 0;
+		info->R[PSC_VOLTAGE_OUT] = -1;
+	} else if (config & ADM1275_VRANGE) {
 		info->m[PSC_VOLTAGE_IN] = 19199;
 		info->b[PSC_VOLTAGE_IN] = 0;
 		info->R[PSC_VOLTAGE_IN] = -2;
@@ -271,6 +326,31 @@ static int adm1275_probe(struct i2c_client *client,
 		data->have_oc_fault = true;
 
 	switch (data->id) {
+	case adm1075:
+		info->format[PSC_POWER] = direct;
+		info->b[PSC_POWER] = 0;
+		info->R[PSC_POWER] = -1;
+		switch (config & ADM1075_IRANGE_MASK) {
+		case ADM1075_IRANGE_25:
+			info->m[PSC_POWER] = 8549;
+			info->m[PSC_CURRENT_OUT] = 806;
+			break;
+		case ADM1075_IRANGE_50:
+			info->m[PSC_POWER] = 4279;
+			info->m[PSC_CURRENT_OUT] = 404;
+			break;
+		default:
+			dev_err(&client->dev, "Invalid input current range");
+			info->m[PSC_POWER] = 0;
+			info->m[PSC_CURRENT_OUT] = 0;
+			break;
+		}
+		info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
+		  | PMBUS_HAVE_STATUS_INPUT;
+		if (config & ADM1275_VIN_VOUT_SELECT)
+			info->func[0] |=
+			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+		break;
 	case adm1275:
 		if (config & ADM1275_VIN_VOUT_SELECT)
 			info->func[0] |=