hwmon: (w83627ehf) Move fan pins check to a separate function

Move the check of fan pin usage to a separate function. This improves
readability, and will make it easier to integrate chip-specific
conditions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

1 files changed, 67 insertions, 53 deletions

diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index c77a4b92ebc..f5fec1cd1d4 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1844,13 +1844,78 @@ static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
 	data->reg_temp_config[r2] = tmp;
 }
 
+static void __devinit
+w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
+			   struct w83627ehf_data *data)
+{
+	int fan3pin, fan4pin, fan4min, fan5pin, regval;
+
+	superio_enter(sio_data->sioreg);
+
+	/* fan4 and fan5 share some pins with the GPIO and serial flash */
+	if (sio_data->kind == nct6775) {
+		/* On NCT6775, fan4 shares pins with the fdc interface */
+		fan3pin = 1;
+		fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
+		fan4min = 0;
+		fan5pin = 0;
+	} else if (sio_data->kind == nct6776) {
+		fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
+		fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
+		fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
+		fan4min = fan4pin;
+	} else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
+		fan3pin = 1;
+		fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
+		fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
+		fan4min = fan4pin;
+	} else {
+		fan3pin = 1;
+		fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
+		fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
+		fan4min = fan4pin;
+	}
+
+	superio_exit(sio_data->sioreg);
+
+	data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
+	data->has_fan |= (fan3pin << 2);
+	data->has_fan_min |= (fan3pin << 2);
+
+	if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
+		/*
+		 * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1
+		 * register
+		 */
+		data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
+		data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
+	} else {
+		/*
+		 * It looks like fan4 and fan5 pins can be alternatively used
+		 * as fan on/off switches, but fan5 control is write only :/
+		 * We assume that if the serial interface is disabled, designers
+		 * connected fan5 as input unless they are emitting log 1, which
+		 * is not the default.
+		 */
+		regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
+		if ((regval & (1 << 2)) && fan4pin) {
+			data->has_fan |= (1 << 3);
+			data->has_fan_min |= (1 << 3);
+		}
+		if (!(regval & (1 << 1)) && fan5pin) {
+			data->has_fan |= (1 << 4);
+			data->has_fan_min |= (1 << 4);
+		}
+	}
+}
+
 static int __devinit w83627ehf_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct w83627ehf_sio_data *sio_data = dev->platform_data;
 	struct w83627ehf_data *data;
 	struct resource *res;
-	u8 fan3pin, fan4pin, fan4min, fan5pin, en_vrm10;
+	u8 en_vrm10;
 	int i, err = 0;
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -2135,30 +2200,6 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* fan4 and fan5 share some pins with the GPIO and serial flash */
-	if (sio_data->kind == nct6775) {
-		/* On NCT6775, fan4 shares pins with the fdc interface */
-		fan3pin = 1;
-		fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
-		fan4min = 0;
-		fan5pin = 0;
-	} else if (sio_data->kind == nct6776) {
-		fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
-		fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
-		fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
-		fan4min = fan4pin;
-	} else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
-		fan3pin = 1;
-		fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
-		fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
-		fan4min = fan4pin;
-	} else {
-		fan3pin = 1;
-		fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
-		fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
-		fan4min = fan4pin;
-	}
-
 	if (fan_debounce &&
 	    (sio_data->kind == nct6775 || sio_data->kind == nct6776)) {
 		u8 tmp;
@@ -2176,34 +2217,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 
 	superio_exit(sio_data->sioreg);
 
-	/* It looks like fan4 and fan5 pins can be alternatively used
-	   as fan on/off switches, but fan5 control is write only :/
-	   We assume that if the serial interface is disabled, designers
-	   connected fan5 as input unless they are emitting log 1, which
-	   is not the default. */
-
-	data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
-
-	data->has_fan |= (fan3pin << 2);
-	data->has_fan_min |= (fan3pin << 2);
-
-	/*
-	 * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1 register
-	 */
-	if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
-		data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
-		data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
-	} else {
-		i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
-		if ((i & (1 << 2)) && fan4pin) {
-			data->has_fan |= (1 << 3);
-			data->has_fan_min |= (1 << 3);
-		}
-		if (!(i & (1 << 1)) && fan5pin) {
-			data->has_fan |= (1 << 4);
-			data->has_fan_min |= (1 << 4);
-		}
-	}
+	w83627ehf_check_fan_inputs(sio_data, data);
 
 	/* Read fan clock dividers immediately */
 	w83627ehf_update_fan_div_common(dev, data);