hwmon: (f71882fg) Add support for the F71858F

Add support for the hwmon part of the Fintek F71858FG superio IC to the
f71882fg driver. Many thanks to Jelle de Jong for lending me a motherboard 
with this superio on it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

2 files changed, 158 insertions, 38 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 79117c3abb4..f8090e137fe 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -306,11 +306,11 @@ config SENSORS_F71805F
 	  will be called f71805f.
 
 config SENSORS_F71882FG
-	tristate "Fintek F71862FG, F71882FG and F8000"
+	tristate "Fintek F71858FG, F71862FG, F71882FG and F8000"
 	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
-	  features of the Fintek F71882FG/F71883FG, F71862FG/71863FG
+	  features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG
 	  and F8000 Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 7e5b94c1944..4146105f1a5 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -32,6 +32,7 @@
 
 #define DRVNAME "f71882fg"
 
+#define SIO_F71858FG_LD_HWM	0x02	/* Hardware monitor logical device */
 #define SIO_F71882FG_LD_HWM	0x04	/* Hardware monitor logical device */
 #define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
 #define SIO_LOCK_KEY		0xAA	/* Key to diasble Super-I/O */
@@ -44,6 +45,7 @@
 #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
 
 #define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
+#define SIO_F71858_ID		0x0507  /* Chipset ID */
 #define SIO_F71862_ID		0x0601	/* Chipset ID */
 #define SIO_F71882_ID		0x0541	/* Chipset ID */
 #define SIO_F8000_ID		0x0581	/* Chipset ID */
@@ -70,6 +72,7 @@
 #define F71882FG_REG_TEMP_HIGH(nr)	(0x81 + 2 * (nr))
 #define F71882FG_REG_TEMP_STATUS	0x62
 #define F71882FG_REG_TEMP_BEEP		0x63
+#define F71882FG_REG_TEMP_CONFIG	0x69
 #define F71882FG_REG_TEMP_HYST(nr)	(0x6C + (nr))
 #define F71882FG_REG_TEMP_TYPE		0x6B
 #define F71882FG_REG_TEMP_DIODE_OPEN	0x6F
@@ -92,9 +95,10 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-enum chips { f71862fg, f71882fg, f8000 };
+enum chips { f71858fg, f71862fg, f71882fg, f8000 };
 
 static const char *f71882fg_names[] = {
+	"f71858fg",
 	"f71862fg",
 	"f71882fg",
 	"f8000",
@@ -119,6 +123,7 @@ struct f71882fg_data {
 	struct device *hwmon_dev;
 
 	struct mutex update_lock;
+	int temp_start;			/* temp numbering start (0 or 1) */
 	char valid;			/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 	unsigned long last_limits;	/* In jiffies */
@@ -136,7 +141,7 @@ struct f71882fg_data {
 	/* Note: all models have only 3 temperature channels, but on some
 	   they are addressed as 0-2 and on others as 1-3, so for coding
 	   convenience we reserve space for 4 channels */
-	u8	temp[4];
+	u16	temp[4];
 	u8	temp_ovt[4];
 	u8	temp_high[4];
 	u8	temp_hyst[2]; /* 2 hysts stored per reg */
@@ -144,6 +149,7 @@ struct f71882fg_data {
 	u8	temp_status;
 	u8	temp_beep;
 	u8	temp_diode_open;
+	u8	temp_config;
 	u8	pwm[4];
 	u8	pwm_enable;
 	u8	pwm_auto_point_hyst[2];
@@ -252,6 +258,50 @@ static struct platform_driver f71882fg_driver = {
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
+/* Temp and in attr for the f71858fg */
+static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
+	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
+	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
+	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
+	SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 0),
+	SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 0),
+	SENSOR_ATTR_2(temp1_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 0),
+	SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 0),
+	SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 0),
+	SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
+	SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
+	SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 1),
+	SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 1),
+	SENSOR_ATTR_2(temp2_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 1),
+	SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 1),
+	SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
+	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
+	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
+	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 2),
+	SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 2),
+	SENSOR_ATTR_2(temp3_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
+	SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 2),
+	SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 2),
+	SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
+	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+};
+
 /* Temp and in attr common to both the f71862fg and f71882fg */
 static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
@@ -476,22 +526,8 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
 };
 
-/* Fan / PWM attr for the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
-	SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 0),
-	SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 1),
-	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 2),
-	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
-	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
-		      show_fan_full_speed,
-		      store_fan_full_speed, 0, 3),
-	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 3),
-	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
-
+/* Fan / PWM attr common to both the f71882fg and f71858fg */
+static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 0),
@@ -605,6 +641,24 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 2, 2),
 	SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
+};
+
+/* Fan / PWM attr found on the f71882fg but not on the f71858fg */
+static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
+	SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 0),
+	SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 1),
+	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 2),
+
+	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
+		      show_fan_full_speed,
+		      store_fan_full_speed, 0, 3),
+	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 3),
+	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
 
 	SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
 	SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
@@ -855,13 +909,20 @@ static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val)
 	outb(val & 255, data->addr + DATA_REG_OFFSET);
 }
 
+static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
+{
+	if (data->type == f71858fg)
+		return f71882fg_read16(data, F71882FG_REG_TEMP(nr));
+	else
+		return f71882fg_read8(data, F71882FG_REG_TEMP(nr));
+}
+
 static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
 	int nr, reg = 0, reg2;
 	int nr_fans = (data->type == f71882fg) ? 4 : 3;
-	int nr_ins = (data->type == f8000) ? 3 : 9;
-	int temp_start = (data->type == f8000) ? 0 : 1;
+	int nr_ins = (data->type == f71858fg || data->type == f8000) ? 3 : 9;
 
 	mutex_lock(&data->update_lock);
 
@@ -876,7 +937,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 		}
 
 		/* Get High & boundary temps*/
-		for (nr = temp_start; nr < 3 + temp_start; nr++) {
+		for (nr = data->temp_start; nr < 3 + data->temp_start; nr++) {
 			data->temp_ovt[nr] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_OVT(nr));
 			data->temp_high[nr] = f71882fg_read8(data,
@@ -884,14 +945,17 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 		}
 
 		if (data->type != f8000) {
-			data->fan_beep = f71882fg_read8(data,
-						F71882FG_REG_FAN_BEEP);
-			data->temp_beep = f71882fg_read8(data,
-						F71882FG_REG_TEMP_BEEP);
 			data->temp_hyst[0] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_HYST(0));
 			data->temp_hyst[1] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_HYST(1));
+		}
+
+		if (data->type == f71862fg || data->type == f71882fg) {
+			data->fan_beep = f71882fg_read8(data,
+						F71882FG_REG_FAN_BEEP);
+			data->temp_beep = f71882fg_read8(data,
+						F71882FG_REG_TEMP_BEEP);
 			/* Have to hardcode type, because temp1 is special */
 			reg  = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
 			data->temp_type[2] = (reg & 0x04) ? 2 : 4;
@@ -902,10 +966,10 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 			data->temp_type[1] = 6 /* PECI */;
 		else if ((reg2 & 0x03) == 0x02)
 			data->temp_type[1] = 5 /* AMDSI */;
-		else if (data->type != f8000)
+		else if (data->type == f71862fg || data->type == f71882fg)
 			data->temp_type[1] = (reg & 0x02) ? 2 : 4;
 		else
-			data->temp_type[1] = 2; /* F8000 only supports BJT */
+			data->temp_type[1] = 2; /* Only supports BJT */
 
 		data->pwm_enable = f71882fg_read8(data,
 						  F71882FG_REG_PWM_ENABLE);
@@ -961,9 +1025,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 						F71882FG_REG_TEMP_STATUS);
 		data->temp_diode_open = f71882fg_read8(data,
 						F71882FG_REG_TEMP_DIODE_OPEN);
-		for (nr = temp_start; nr < 3 + temp_start; nr++)
-			data->temp[nr] = f71882fg_read8(data,
-						F71882FG_REG_TEMP(nr));
+		for (nr = data->temp_start; nr < 3 + data->temp_start; nr++)
+			data->temp[nr] = f71882fg_read_temp(data, nr);
 
 		data->fan_status = f71882fg_read8(data,
 						F71882FG_REG_FAN_STATUS);
@@ -1166,8 +1229,24 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 {
 	struct f71882fg_data *data = f71882fg_update_device(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
+	int sign, temp;
+
+	if (data->type == f71858fg) {
+		/* TEMP_TABLE_SEL 1 or 3 ? */
+		if (data->temp_config & 1) {
+			sign = data->temp[nr] & 0x0001;
+			temp = (data->temp[nr] >> 5) & 0x7ff;
+		} else {
+			sign = data->temp[nr] & 0x8000;
+			temp = (data->temp[nr] >> 5) & 0x3ff;
+		}
+		temp *= 125;
+		if (sign)
+			temp -= 128000;
+	} else
+		temp = data->temp[nr] * 1000;
 
-	return sprintf(buf, "%d\n", data->temp[nr] * 1000);
+	return sprintf(buf, "%d\n", temp);
 }
 
 static ssize_t show_temp_max(struct device *dev, struct device_attribute
@@ -1460,6 +1539,12 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
 	} else {
 		switch (val) {
 		case 1:
+			/* The f71858fg does not support manual RPM mode */
+			if (data->type == f71858fg &&
+			    ((data->pwm_enable >> (2 * nr)) & 1)) {
+				count = -EINVAL;
+				goto leave;
+			}
 			data->pwm_enable |= 2 << (2 * nr);
 			break;		/* Manual */
 		case 2:
@@ -1618,9 +1703,9 @@ static ssize_t show_pwm_auto_point_channel(struct device *dev,
 	int result;
 	struct f71882fg_data *data = f71882fg_update_device(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
-	int temp_start = (data->type == f8000) ? 0 : 1;
 
-	result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) - temp_start);
+	result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) -
+		       data->temp_start);
 
 	return sprintf(buf, "%d\n", result);
 }
@@ -1631,7 +1716,6 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
-	int temp_start = (data->type == f8000) ? 0 : 1;
 	long val = simple_strtol(buf, NULL, 10);
 
 	switch (val) {
@@ -1647,7 +1731,7 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
 	default:
 		return -EINVAL;
 	}
-	val += temp_start;
+	val += data->temp_start;
 	mutex_lock(&data->update_lock);
 	data->pwm_auto_point_mapping[nr] =
 		f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr));
@@ -1723,6 +1807,8 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
 	data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
 	data->type = sio_data->type;
+	data->temp_start =
+	    (data->type == f71858fg || data->type == f8000) ? 0 : 1;
 	mutex_init(&data->update_lock);
 	platform_set_drvdata(pdev, data);
 
@@ -1745,6 +1831,20 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
 	if (start_reg & 0x01) {
 		switch (data->type) {
+		case f71858fg:
+			data->temp_config =
+				f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG);
+			if (data->temp_config & 0x10)
+				/* The f71858fg temperature alarms behave as
+				   the f8000 alarms in this mode */
+				err = f71882fg_create_sysfs_files(pdev,
+					f8000_in_temp_attr,
+					ARRAY_SIZE(f8000_in_temp_attr));
+			else
+				err = f71882fg_create_sysfs_files(pdev,
+					f71858fg_in_temp_attr,
+					ARRAY_SIZE(f71858fg_in_temp_attr));
+			break;
 		case f71882fg:
 			err = f71882fg_create_sysfs_files(pdev,
 					f71882fg_in_temp_attr,
@@ -1773,6 +1873,12 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
 		/* Sanity check the pwm settings */
 		switch (data->type) {
+		case f71858fg:
+			err = 0;
+			for (i = 0; i < nr_fans; i++)
+				if (((data->pwm_enable >> (i * 2)) & 3) == 3)
+					err = 1;
+			break;
 		case f71862fg:
 			err = (data->pwm_enable & 0x15) != 0x15;
 			break;
@@ -1806,6 +1912,13 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 			err = f71882fg_create_sysfs_files(pdev,
 					f71882fg_fan_attr,
 					ARRAY_SIZE(f71882fg_fan_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			/* fall through! */
+		case f71858fg:
+			err = f71882fg_create_sysfs_files(pdev,
+					f71882fg_f71858fg_fan_attr,
+					ARRAY_SIZE(f71882fg_f71858fg_fan_attr));
 			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
@@ -1890,6 +2003,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
 	switch (devid) {
+	case SIO_F71858_ID:
+		sio_data->type = f71858fg;
+		break;
 	case SIO_F71862_ID:
 		sio_data->type = f71862fg;
 		break;
@@ -1904,7 +2020,11 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 		goto exit;
 	}
 
-	superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+	if (sio_data->type == f71858fg)
+		superio_select(sioaddr, SIO_F71858FG_LD_HWM);
+	else
+		superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+
 	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
 		printk(KERN_WARNING DRVNAME ": Device not activated\n");
 		goto exit;