[PATCH] hwmon: hwmon vs i2c, second round (10/11)

I see very little reason why vid_from_reg is inlined. It is not
exactly short, its parameters are seldom known in advance, and it is
never called in speed critical areas. Uninlining it should cause
little performance loss if any, and saves a signficant space as well
as compilation time.

As suggested by Alexey Dobriyan, I am leaving vid_to_reg inline for now,
as it is short and has a single user so far.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 82 insertions, 0 deletions

diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 7c8ed035330..a54d0869997 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -3,6 +3,10 @@
 
     Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
 
+    Partly imported from i2c-vid.h of the lm_sensors project
+    Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+    With assistance from Trent Piepho <xyzzy@speakeasy.org>
+
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
@@ -23,6 +27,83 @@
 #include <linux/kernel.h>
 #include <linux/hwmon-vid.h>
 
+/*
+    Common code for decoding VID pins.
+
+    References:
+
+    For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
+    available at http://developer.intel.com/.
+
+    For VRD 10.0 and up, "VRD x.y Design Guide",
+    available at http://developer.intel.com/.
+
+    AMD Opteron processors don't follow the Intel specifications.
+    I'm going to "make up" 2.4 as the spec number for the Opterons.
+    No good reason just a mnemonic for the 24x Opteron processor
+    series.
+
+    Opteron VID encoding is:
+       00000  =  1.550 V
+       00001  =  1.525 V
+        . . . .
+       11110  =  0.800 V
+       11111  =  0.000 V (off)
+*/
+
+/* vrm is the VRM/VRD document version multiplied by 10.
+   val is the 4-, 5- or 6-bit VID code.
+   Returned value is in mV to avoid floating point in the kernel. */
+int vid_from_reg(int val, int vrm)
+{
+	int vid;
+
+	switch(vrm) {
+
+	case  0:
+		return 0;
+
+	case 100:               /* VRD 10.0 */
+		if((val & 0x1f) == 0x1f)
+			return 0;
+		if((val & 0x1f) <= 0x09 || val == 0x0a)
+			vid = 10875 - (val & 0x1f) * 250;
+		else
+			vid = 18625 - (val & 0x1f) * 250;
+		if(val & 0x20)
+			vid -= 125;
+		vid /= 10;      /* only return 3 dec. places for now */
+		return vid;
+
+	case 24:                /* Opteron processor */
+		return(val == 0x1f ? 0 : 1550 - val * 25);
+
+	case 91:		/* VRM 9.1 */
+	case 90:		/* VRM 9.0 */
+		return(val == 0x1f ? 0 :
+		                       1850 - val * 25);
+
+	case 85:		/* VRM 8.5 */
+		return((val & 0x10  ? 25 : 0) +
+		       ((val & 0x0f) > 0x04 ? 2050 : 1250) -
+		       ((val & 0x0f) * 50));
+
+	case 84:		/* VRM 8.4 */
+		val &= 0x0f;
+				/* fall through */
+	default:		/* VRM 8.2 */
+		return(val == 0x1f ? 0 :
+		       val & 0x10  ? 5100 - (val) * 100 :
+		                     2050 - (val) * 50);
+	}
+}
+
+
+/*
+    After this point is the code to automatically determine which
+    VRM/VRD specification should be used depending on the CPU.
+*/
+
 struct vrm_model {
 	u8 vendor;
 	u8 eff_family;
@@ -96,6 +177,7 @@ int vid_which_vrm(void)
 }
 #endif
 
+EXPORT_SYMBOL(vid_from_reg);
 EXPORT_SYMBOL(vid_which_vrm);
 
 MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");