[PATCH] I2C: Move hwmon drivers (2/3)

Part 2: Move the driver files themselves.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 1065 insertions, 0 deletions

diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
new file mode 100644
index 00000000000..70d996d6fe0
--- /dev/null
+++ b/drivers/hwmon/asb100.c
@@ -0,0 +1,1065 @@
+/*
+    asb100.c - Part of lm_sensors, Linux kernel modules for hardware
+	        monitoring
+
+    Copyright (C) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
+
+	(derived from w83781d.c)
+
+    Copyright (C) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>, and
+    Mark Studebaker <mdsxyz123@yahoo.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This driver supports the hardware sensor chips: Asus ASB100 and
+    ASB100-A "BACH".
+
+    ASB100-A supports pwm1, while plain ASB100 does not.  There is no known
+    way for the driver to tell which one is there.
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    asb100	7	3	1	4	0x31	0x0694	yes	no
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include "lm75.h"
+
+/*
+	HISTORY:
+	2003-12-29	1.0.0	Ported from lm_sensors project for kernel 2.6
+*/
+#define ASB100_VERSION "1.0.0"
+
+/* I2C addresses to scan */
+static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
+
+/* ISA addresses to scan (none) */
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(asb100);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+	"{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+/* Voltage IN registers 0-6 */
+#define ASB100_REG_IN(nr)	(0x20 + (nr))
+#define ASB100_REG_IN_MAX(nr)	(0x2b + (nr * 2))
+#define ASB100_REG_IN_MIN(nr)	(0x2c + (nr * 2))
+
+/* FAN IN registers 1-3 */
+#define ASB100_REG_FAN(nr)	(0x28 + (nr))
+#define ASB100_REG_FAN_MIN(nr)	(0x3b + (nr))
+
+/* TEMPERATURE registers 1-4 */
+static const u16 asb100_reg_temp[]	= {0, 0x27, 0x150, 0x250, 0x17};
+static const u16 asb100_reg_temp_max[]	= {0, 0x39, 0x155, 0x255, 0x18};
+static const u16 asb100_reg_temp_hyst[]	= {0, 0x3a, 0x153, 0x253, 0x19};
+
+#define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr])
+#define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr])
+#define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr])
+
+#define ASB100_REG_TEMP2_CONFIG	0x0152
+#define ASB100_REG_TEMP3_CONFIG	0x0252
+
+
+#define ASB100_REG_CONFIG	0x40
+#define ASB100_REG_ALARM1	0x41
+#define ASB100_REG_ALARM2	0x42
+#define ASB100_REG_SMIM1	0x43
+#define ASB100_REG_SMIM2	0x44
+#define ASB100_REG_VID_FANDIV	0x47
+#define ASB100_REG_I2C_ADDR	0x48
+#define ASB100_REG_CHIPID	0x49
+#define ASB100_REG_I2C_SUBADDR	0x4a
+#define ASB100_REG_PIN		0x4b
+#define ASB100_REG_IRQ		0x4c
+#define ASB100_REG_BANK		0x4e
+#define ASB100_REG_CHIPMAN	0x4f
+
+#define ASB100_REG_WCHIPID	0x58
+
+/* bit 7 -> enable, bits 0-3 -> duty cycle */
+#define ASB100_REG_PWM1		0x59
+
+/* CONVERSIONS
+   Rounding and limit checking is only done on the TO_REG variants. */
+
+/* These constants are a guess, consistent w/ w83781d */
+#define ASB100_IN_MIN (   0)
+#define ASB100_IN_MAX (4080)
+
+/* IN: 1/1000 V (0V to 4.08V)
+   REG: 16mV/bit */
+static u8 IN_TO_REG(unsigned val)
+{
+	unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX);
+	return (nval + 8) / 16;
+}
+
+static unsigned IN_FROM_REG(u8 reg)
+{
+	return reg * 16;
+}
+
+static u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == -1)
+		return 0;
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static int FAN_FROM_REG(u8 val, int div)
+{
+	return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
+}
+
+/* These constants are a guess, consistent w/ w83781d */
+#define ASB100_TEMP_MIN (-128000)
+#define ASB100_TEMP_MAX ( 127000)
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static u8 TEMP_TO_REG(int temp)
+{
+	int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
+	ntemp += (ntemp<0 ? -500 : 500);
+	return (u8)(ntemp / 1000);
+}
+
+static int TEMP_FROM_REG(u8 reg)
+{
+	return (s8)reg * 1000;
+}
+
+/* PWM: 0 - 255 per sensors documentation
+   REG: (6.25% duty cycle per bit) */
+static u8 ASB100_PWM_TO_REG(int pwm)
+{
+	pwm = SENSORS_LIMIT(pwm, 0, 255);
+	return (u8)(pwm / 16);
+}
+
+static int ASB100_PWM_FROM_REG(u8 reg)
+{
+	return reg * 16;
+}
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
+   REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
+static u8 DIV_TO_REG(long val)
+{
+	return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
+}
+
+/* For each registered client, we need to keep some data in memory. That
+   data is pointed to by client->data. The structure itself is
+   dynamically allocated, at the same time the client itself is allocated. */
+struct asb100_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	unsigned long last_updated;	/* In jiffies */
+
+	/* array of 2 pointers to subclients */
+	struct i2c_client *lm75[2];
+
+	char valid;		/* !=0 if following fields are valid */
+	u8 in[7];		/* Register value */
+	u8 in_max[7];		/* Register value */
+	u8 in_min[7];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u16 temp[4];		/* Register value (0 and 3 are u8 only) */
+	u16 temp_max[4];	/* Register value (0 and 3 are u8 only) */
+	u16 temp_hyst[4];	/* Register value (0 and 3 are u8 only) */
+	u8 fan_div[3];		/* Register encoding, right justified */
+	u8 pwm;			/* Register encoding */
+	u8 vid;			/* Register encoding, combined */
+	u32 alarms;		/* Register encoding, combined */
+	u8 vrm;
+};
+
+static int asb100_read_value(struct i2c_client *client, u16 reg);
+static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val);
+
+static int asb100_attach_adapter(struct i2c_adapter *adapter);
+static int asb100_detect(struct i2c_adapter *adapter, int address, int kind);
+static int asb100_detach_client(struct i2c_client *client);
+static struct asb100_data *asb100_update_device(struct device *dev);
+static void asb100_init_client(struct i2c_client *client);
+
+static struct i2c_driver asb100_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "asb100",
+	.id		= I2C_DRIVERID_ASB100,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= asb100_attach_adapter,
+	.detach_client	= asb100_detach_client,
+};
+
+/* 7 Voltages */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct asb100_data *data = asb100_update_device(dev); \
+	return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \
+}
+
+show_in_reg(in)
+show_in_reg(in_min)
+show_in_reg(in_max)
+
+#define set_in_reg(REG, reg) \
+static ssize_t set_in_##reg(struct device *dev, const char *buf, \
+		size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct asb100_data *data = i2c_get_clientdata(client); \
+	unsigned long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
+		data->in_##reg[nr]); \
+	up(&data->update_lock); \
+	return count; \
+}
+
+set_in_reg(MIN, min)
+set_in_reg(MAX, max)
+
+#define sysfs_in(offset) \
+static ssize_t \
+	show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+		show_in##offset, NULL); \
+static ssize_t \
+	show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_in_min(dev, buf, offset); \
+} \
+static ssize_t \
+	show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_in_max(dev, buf, offset); \
+} \
+static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	return set_in_min(dev, buf, count, offset); \
+} \
+static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \
+		const char *buf, size_t count) \
+{ \
+	return set_in_max(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+		show_in##offset##_min, set_in##offset##_min); \
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+		show_in##offset##_max, set_in##offset##_max);
+
+sysfs_in(0);
+sysfs_in(1);
+sysfs_in(2);
+sysfs_in(3);
+sysfs_in(4);
+sysfs_in(5);
+sysfs_in(6);
+
+#define device_create_file_in(client, offset) do { \
+	device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+	device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+	device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+/* 3 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+		DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+		DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+				size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	u32 val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+	asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+				size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long min;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int reg;
+	
+	down(&data->update_lock);
+
+	min = FAN_FROM_REG(data->fan_min[nr],
+			DIV_FROM_REG(data->fan_div[nr]));
+	data->fan_div[nr] = DIV_TO_REG(val);
+
+	switch(nr) {
+	case 0:	/* fan 1 */
+		reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		reg = (reg & 0xcf) | (data->fan_div[0] << 4);
+		asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
+		break;
+
+	case 1:	/* fan 2 */
+		reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		reg = (reg & 0x3f) | (data->fan_div[1] << 6);
+		asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
+		break;
+
+	case 2:	/* fan 3 */
+		reg = asb100_read_value(client, ASB100_REG_PIN);
+		reg = (reg & 0x3f) | (data->fan_div[2] << 6);
+		asb100_write_value(client, ASB100_REG_PIN, reg);
+		break;
+	}
+
+	data->fan_min[nr] =
+		FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
+
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define sysfs_fan(offset) \
+static ssize_t show_fan##offset(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan(dev, buf, offset - 1); \
+} \
+static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan_min(dev, buf, offset - 1); \
+} \
+static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_fan_div(dev, buf, offset - 1); \
+} \
+static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
+					size_t count) \
+{ \
+	return set_fan_min(dev, buf, count, offset - 1); \
+} \
+static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \
+					size_t count) \
+{ \
+	return set_fan_div(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+		show_fan##offset, NULL); \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_min, set_fan##offset##_min); \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+		show_fan##offset##_div, set_fan##offset##_div);
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+
+#define device_create_file_fan(client, offset) do { \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+	device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+/* 4 Temp. Sensors */
+static int sprintf_temp_from_reg(u16 reg, char *buf, int nr)
+{
+	int ret = 0;
+
+	switch (nr) {
+	case 1: case 2:
+		ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg));
+		break;
+	case 0: case 3: default:
+		ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
+		break;
+	}
+	return ret;
+}
+		 	
+#define show_temp_reg(reg) \
+static ssize_t show_##reg(struct device *dev, char *buf, int nr) \
+{ \
+	struct asb100_data *data = asb100_update_device(dev); \
+	return sprintf_temp_from_reg(data->reg[nr], buf, nr); \
+}
+
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_hyst);
+
+#define set_temp_reg(REG, reg) \
+static ssize_t set_##reg(struct device *dev, const char *buf, \
+			size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct asb100_data *data = i2c_get_clientdata(client); \
+	unsigned long val = simple_strtoul(buf, NULL, 10); \
+ \
+	down(&data->update_lock); \
+	switch (nr) { \
+	case 1: case 2: \
+		data->reg[nr] = LM75_TEMP_TO_REG(val); \
+		break; \
+	case 0: case 3: default: \
+		data->reg[nr] = TEMP_TO_REG(val); \
+		break; \
+	} \
+	asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
+			data->reg[nr]); \
+	up(&data->update_lock); \
+	return count; \
+}
+
+set_temp_reg(MAX, temp_max);
+set_temp_reg(HYST, temp_hyst);
+
+#define sysfs_temp(num) \
+static ssize_t show_temp##num(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL); \
+static ssize_t show_temp_max##num(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp_max(dev, buf, num-1); \
+} \
+static ssize_t set_temp_max##num(struct device *dev, struct device_attribute *attr, const char *buf, \
+					size_t count) \
+{ \
+	return set_temp_max(dev, buf, count, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \
+		show_temp_max##num, set_temp_max##num); \
+static ssize_t show_temp_hyst##num(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return show_temp_hyst(dev, buf, num-1); \
+} \
+static ssize_t set_temp_hyst##num(struct device *dev, struct device_attribute *attr, const char *buf, \
+					size_t count) \
+{ \
+	return set_temp_hyst(dev, buf, count, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \
+		show_temp_hyst##num, set_temp_hyst##num);
+
+sysfs_temp(1);
+sysfs_temp(2);
+sysfs_temp(3);
+sysfs_temp(4);
+
+/* VID */
+#define device_create_file_temp(client, num) do { \
+	device_create_file(&client->dev, &dev_attr_temp##num##_input); \
+	device_create_file(&client->dev, &dev_attr_temp##num##_max); \
+	device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \
+} while (0)
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+/* VRM */
+static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+	return count;
+}
+
+/* Alarms */
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm);
+
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms)
+
+/* 1 PWM */
+static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f));
+}
+
+static ssize_t set_pwm1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm &= 0x80; /* keep the enable bit */
+	data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
+	asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
+	up(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm_enable1(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct asb100_data *data = asb100_update_device(dev);
+	return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0);
+}
+
+static ssize_t set_pwm_enable1(struct device *dev, struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm &= 0x0f; /* keep the duty cycle bits */
+	data->pwm |= (val ? 0x80 : 0x00);
+	asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
+	up(&data->update_lock);
+	return count;
+}
+
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+		show_pwm_enable1, set_pwm_enable1);
+#define device_create_file_pwm1(client) do { \
+	device_create_file(&new_client->dev, &dev_attr_pwm1); \
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \
+} while (0)
+
+/* This function is called when:
+	asb100_driver is inserted (when this module is loaded), for each
+		available adapter
+	when a new adapter is inserted (and asb100_driver is still present)
+ */
+static int asb100_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, asb100_detect);
+}
+
+static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
+		int kind, struct i2c_client *new_client)
+{
+	int i, id, err;
+	struct asb100_data *data = i2c_get_clientdata(new_client);
+
+	data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(data->lm75[0])) {
+		err = -ENOMEM;
+		goto ERROR_SC_0;
+	}
+	memset(data->lm75[0], 0x00, sizeof(struct i2c_client));
+
+	data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(data->lm75[1])) {
+		err = -ENOMEM;
+		goto ERROR_SC_1;
+	}
+	memset(data->lm75[1], 0x00, sizeof(struct i2c_client));
+
+	id = i2c_adapter_id(adapter);
+
+	if (force_subclients[0] == id && force_subclients[1] == address) {
+		for (i = 2; i <= 3; i++) {
+			if (force_subclients[i] < 0x48 ||
+			    force_subclients[i] > 0x4f) {
+				dev_err(&new_client->dev, "invalid subclient "
+					"address %d; must be 0x48-0x4f\n",
+					force_subclients[i]);
+				err = -ENODEV;
+				goto ERROR_SC_2;
+			}
+		}
+		asb100_write_value(new_client, ASB100_REG_I2C_SUBADDR,
+					(force_subclients[2] & 0x07) |
+					((force_subclients[3] & 0x07) <<4));
+		data->lm75[0]->addr = force_subclients[2];
+		data->lm75[1]->addr = force_subclients[3];
+	} else {
+		int val = asb100_read_value(new_client, ASB100_REG_I2C_SUBADDR);
+		data->lm75[0]->addr = 0x48 + (val & 0x07);
+		data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07);
+	}
+
+	if(data->lm75[0]->addr == data->lm75[1]->addr) {
+		dev_err(&new_client->dev, "duplicate addresses 0x%x "
+				"for subclients\n", data->lm75[0]->addr);
+		err = -ENODEV;
+		goto ERROR_SC_2;
+	}
+
+	for (i = 0; i <= 1; i++) {
+		i2c_set_clientdata(data->lm75[i], NULL);
+		data->lm75[i]->adapter = adapter;
+		data->lm75[i]->driver = &asb100_driver;
+		data->lm75[i]->flags = 0;
+		strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE);
+	}
+
+	if ((err = i2c_attach_client(data->lm75[0]))) {
+		dev_err(&new_client->dev, "subclient %d registration "
+			"at address 0x%x failed.\n", i, data->lm75[0]->addr);
+		goto ERROR_SC_2;
+	}
+
+	if ((err = i2c_attach_client(data->lm75[1]))) {
+		dev_err(&new_client->dev, "subclient %d registration "
+			"at address 0x%x failed.\n", i, data->lm75[1]->addr);
+		goto ERROR_SC_3;
+	}
+
+	return 0;
+
+/* Undo inits in case of errors */
+ERROR_SC_3:
+	i2c_detach_client(data->lm75[0]);
+ERROR_SC_2:
+	kfree(data->lm75[1]);
+ERROR_SC_1:
+	kfree(data->lm75[0]);
+ERROR_SC_0:
+	return err;
+}
+
+static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int err;
+	struct i2c_client *new_client;
+	struct asb100_data *data;
+
+	/* asb100 is SMBus only */
+	if (i2c_is_isa_adapter(adapter)) {
+		pr_debug("asb100.o: detect failed, "
+				"cannot attach to legacy adapter!\n");
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		pr_debug("asb100.o: detect failed, "
+				"smbus byte data not supported!\n");
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access asb100_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
+		pr_debug("asb100.o: detect failed, kmalloc failed!\n");
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+	memset(data, 0, sizeof(struct asb100_data));
+
+	new_client = &data->client;
+	init_MUTEX(&data->lock);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &asb100_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	/* The chip may be stuck in some other bank than bank 0. This may
+	   make reading other information impossible. Specify a force=... or
+	   force_*=... parameter, and the chip will be reset to the right
+	   bank. */
+	if (kind < 0) {
+
+		int val1 = asb100_read_value(new_client, ASB100_REG_BANK);
+		int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN);
+
+		/* If we're in bank 0 */
+		if ( (!(val1 & 0x07)) &&
+				/* Check for ASB100 ID (low byte) */
+				( ((!(val1 & 0x80)) && (val2 != 0x94)) ||
+				/* Check for ASB100 ID (high byte ) */
+				((val1 & 0x80) && (val2 != 0x06)) ) ) {
+			pr_debug("asb100.o: detect failed, "
+					"bad chip id 0x%02x!\n", val2);
+			err = -ENODEV;
+			goto ERROR1;
+		}
+
+	} /* kind < 0 */
+
+	/* We have either had a force parameter, or we have already detected
+	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
+	asb100_write_value(new_client, ASB100_REG_BANK,
+		(asb100_read_value(new_client, ASB100_REG_BANK) & 0x78) | 0x80);
+
+	/* Determine the chip type. */
+	if (kind <= 0) {
+		int val1 = asb100_read_value(new_client, ASB100_REG_WCHIPID);
+		int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN);
+
+		if ((val1 == 0x31) && (val2 == 0x06))
+			kind = asb100;
+		else {
+			if (kind == 0)
+				dev_warn(&new_client->dev, "ignoring "
+					"'force' parameter for unknown chip "
+					"at adapter %d, address 0x%02x.\n",
+					i2c_adapter_id(adapter), address);
+			err = -ENODEV;
+			goto ERROR1;
+		}
+	}
+
+	/* Fill in remaining client fields and put it into the global list */
+	strlcpy(new_client->name, "asb100", I2C_NAME_SIZE);
+	data->type = kind;
+
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR1;
+
+	/* Attach secondary lm75 clients */
+	if ((err = asb100_detect_subclients(adapter, address, kind,
+			new_client)))
+		goto ERROR2;
+
+	/* Initialize the chip */
+	asb100_init_client(new_client);
+
+	/* A few vars need to be filled upon startup */
+	data->fan_min[0] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(0));
+	data->fan_min[1] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(1));
+	data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2));
+
+	/* Register sysfs hooks */
+	device_create_file_in(new_client, 0);
+	device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	device_create_file_in(new_client, 4);
+	device_create_file_in(new_client, 5);
+	device_create_file_in(new_client, 6);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	device_create_file_temp(new_client, 3);
+	device_create_file_temp(new_client, 4);
+
+	device_create_file_vid(new_client);
+	device_create_file_vrm(new_client);
+
+	device_create_file_alarms(new_client);
+
+	device_create_file_pwm1(new_client);
+
+	return 0;
+
+ERROR2:
+	i2c_detach_client(new_client);
+ERROR1:
+	kfree(data);
+ERROR0:
+	return err;
+}
+
+static int asb100_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "client deregistration failed; "
+			"client not detached.\n");
+		return err;
+	}
+
+	if (i2c_get_clientdata(client)==NULL) {
+		/* subclients */
+		kfree(client);
+	} else {
+		/* main client */
+		kfree(i2c_get_clientdata(client));
+	}
+
+	return 0;
+}
+
+/* The SMBus locks itself, usually, but nothing may access the chip between
+   bank switches. */
+static int asb100_read_value(struct i2c_client *client, u16 reg)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	struct i2c_client *cl;
+	int res, bank;
+
+	down(&data->lock);
+
+	bank = (reg >> 8) & 0x0f;
+	if (bank > 2)
+		/* switch banks */
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
+
+	if (bank == 0 || bank > 2) {
+		res = i2c_smbus_read_byte_data(client, reg & 0xff);
+	} else {
+		/* switch to subclient */
+		cl = data->lm75[bank - 1];
+
+		/* convert from ISA to LM75 I2C addresses */
+		switch (reg & 0xff) {
+		case 0x50: /* TEMP */
+			res = swab16(i2c_smbus_read_word_data (cl, 0));
+			break;
+		case 0x52: /* CONFIG */
+			res = i2c_smbus_read_byte_data(cl, 1);
+			break;
+		case 0x53: /* HYST */
+			res = swab16(i2c_smbus_read_word_data (cl, 2));
+			break;
+		case 0x55: /* MAX */
+		default:
+			res = swab16(i2c_smbus_read_word_data (cl, 3));
+			break;
+		}
+	}
+
+	if (bank > 2)
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
+
+	up(&data->lock);
+
+	return res;
+}
+
+static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	struct i2c_client *cl;
+	int bank;
+
+	down(&data->lock);
+
+	bank = (reg >> 8) & 0x0f;
+	if (bank > 2)
+		/* switch banks */
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
+
+	if (bank == 0 || bank > 2) {
+		i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff);
+	} else {
+		/* switch to subclient */
+		cl = data->lm75[bank - 1];
+
+		/* convert from ISA to LM75 I2C addresses */
+		switch (reg & 0xff) {
+		case 0x52: /* CONFIG */
+			i2c_smbus_write_byte_data(cl, 1, value & 0xff);
+			break;
+		case 0x53: /* HYST */
+			i2c_smbus_write_word_data(cl, 2, swab16(value));
+			break;
+		case 0x55: /* MAX */
+			i2c_smbus_write_word_data(cl, 3, swab16(value));
+			break;
+		}
+	}
+
+	if (bank > 2)
+		i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
+
+	up(&data->lock);
+}
+
+static void asb100_init_client(struct i2c_client *client)
+{
+	struct asb100_data *data = i2c_get_clientdata(client);
+	int vid = 0;
+
+	vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
+	vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
+	data->vrm = i2c_which_vrm();
+	vid = vid_from_reg(vid, data->vrm);
+
+	/* Start monitoring */
+	asb100_write_value(client, ASB100_REG_CONFIG, 
+		(asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01);
+}
+
+static struct asb100_data *asb100_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct asb100_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+		|| !data->valid) {
+
+		dev_dbg(&client->dev, "starting device update...\n");
+
+		/* 7 voltage inputs */
+		for (i = 0; i < 7; i++) {
+			data->in[i] = asb100_read_value(client,
+				ASB100_REG_IN(i));
+			data->in_min[i] = asb100_read_value(client,
+				ASB100_REG_IN_MIN(i));
+			data->in_max[i] = asb100_read_value(client,
+				ASB100_REG_IN_MAX(i));
+		}
+
+		/* 3 fan inputs */
+		for (i = 0; i < 3; i++) {
+			data->fan[i] = asb100_read_value(client,
+					ASB100_REG_FAN(i));
+			data->fan_min[i] = asb100_read_value(client,
+					ASB100_REG_FAN_MIN(i));
+		}
+
+		/* 4 temperature inputs */
+		for (i = 1; i <= 4; i++) {
+			data->temp[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP(i));
+			data->temp_max[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP_MAX(i));
+			data->temp_hyst[i-1] = asb100_read_value(client,
+					ASB100_REG_TEMP_HYST(i));
+		}
+
+		/* VID and fan divisors */
+		i = asb100_read_value(client, ASB100_REG_VID_FANDIV);
+		data->vid = i & 0x0f;
+		data->vid |= (asb100_read_value(client,
+				ASB100_REG_CHIPID) & 0x01) << 4;
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		data->fan_div[2] = (asb100_read_value(client,
+				ASB100_REG_PIN) >> 6) & 0x03;
+
+		/* PWM */
+		data->pwm = asb100_read_value(client, ASB100_REG_PWM1);
+
+		/* alarms */
+		data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) +
+			(asb100_read_value(client, ASB100_REG_ALARM2) << 8);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+
+		dev_dbg(&client->dev, "... device update complete\n");
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init asb100_init(void)
+{
+	return i2c_add_driver(&asb100_driver);
+}
+
+static void __exit asb100_exit(void)
+{
+	i2c_del_driver(&asb100_driver);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("ASB100 Bach driver");
+MODULE_LICENSE("GPL");
+
+module_init(asb100_init);
+module_exit(asb100_exit);
+