Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch

3 files changed, 105 insertions, 12 deletions

diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 22a32b9932c..79a04fde69b 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -184,7 +184,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 static bool
 i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 {
-	int tile_width;
+	int tile_width, tile_height;
 
 	/* Linear is always fine */
 	if (tiling_mode == I915_TILING_NONE)
@@ -215,6 +215,20 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 		}
 	}
 
+	if (IS_GEN2(dev) ||
+	    (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
+		tile_height = 32;
+	else
+		tile_height = 8;
+	/* i8xx is strange: It has 2 interleaved rows of tiles, so needs an even
+	 * number of tile rows. */
+	if (IS_GEN2(dev))
+		tile_height *= 2;
+
+	/* Size needs to be aligned to a full tile row */
+	if (size & (tile_height * stride - 1))
+		return false;
+
 	/* 965+ just needs multiples of tile width */
 	if (INTEL_INFO(dev)->gen >= 4) {
 		if (stride & (tile_width - 1))
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 97f946dcc1a..8a9e08bf1cf 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -316,6 +316,8 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct intel_encoder *encoder;
 
+	DRM_DEBUG_KMS("running encoder hotplug functions\n");
+
 	list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
 		if (encoder->hot_plug)
 			encoder->hot_plug(encoder);
@@ -1649,9 +1651,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	} else {
 		hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
 			       SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
-		hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK;
-		I915_WRITE(FDI_RXA_IMR, 0);
-		I915_WRITE(FDI_RXB_IMR, 0);
+		hotplug_mask |= SDE_AUX_MASK;
 	}
 
 	dev_priv->pch_irq_mask = ~hotplug_mask;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3b006536b3d..e79b25bbee6 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1630,19 +1630,19 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
 
 		wait_event(dev_priv->pending_flip_queue,
+			   atomic_read(&dev_priv->mm.wedged) ||
 			   atomic_read(&obj->pending_flip) == 0);
 
 		/* Big Hammer, we also need to ensure that any pending
 		 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
 		 * current scanout is retired before unpinning the old
 		 * framebuffer.
+		 *
+		 * This should only fail upon a hung GPU, in which case we
+		 * can safely continue.
 		 */
 		ret = i915_gem_object_flush_gpu(obj, false);
-		if (ret) {
-			i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
-			mutex_unlock(&dev->struct_mutex);
-			return ret;
-		}
+		(void) ret;
 	}
 
 	ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
@@ -2045,6 +2045,31 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 		   atomic_read(&obj->pending_flip) == 0);
 }
 
+static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+
+	/*
+	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
+	 * must be driven by its own crtc; no sharing is possible.
+	 */
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->base.crtc != crtc)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_EDP:
+			if (!intel_encoder_is_pch_edp(&encoder->base))
+				return false;
+			continue;
+		}
+	}
+
+	return true;
+}
+
 static void ironlake_crtc_enable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -2053,6 +2078,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	u32 reg, temp;
+	bool is_pch_port = false;
 
 	if (intel_crtc->active)
 		return;
@@ -2066,7 +2092,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 			I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
 	}
 
-	ironlake_fdi_enable(crtc);
+	is_pch_port = intel_crtc_driving_pch(crtc);
+
+	if (is_pch_port)
+		ironlake_fdi_enable(crtc);
+	else {
+		/* disable CPU FDI tx and PCH FDI rx */
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+		POSTING_READ(reg);
+
+		reg = FDI_RX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~(0x7 << 16);
+		temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+		I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+		POSTING_READ(reg);
+		udelay(100);
+
+		/* Ironlake workaround, disable clock pointer after downing FDI */
+		if (HAS_PCH_IBX(dev))
+			I915_WRITE(FDI_RX_CHICKEN(pipe),
+				   I915_READ(FDI_RX_CHICKEN(pipe) &
+					     ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+
+		/* still set train pattern 1 */
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(reg, temp);
+
+		reg = FDI_RX_CTL(pipe);
+		temp = I915_READ(reg);
+		if (HAS_PCH_CPT(dev)) {
+			temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+			temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+		} else {
+			temp &= ~FDI_LINK_TRAIN_NONE;
+			temp |= FDI_LINK_TRAIN_PATTERN_1;
+		}
+		/* BPC in FDI rx is consistent with that in PIPECONF */
+		temp &= ~(0x07 << 16);
+		temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(100);
+	}
 
 	/* Enable panel fitting for LVDS */
 	if (dev_priv->pch_pf_size &&
@@ -2100,6 +2175,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 		intel_flush_display_plane(dev, plane);
 	}
 
+	/* Skip the PCH stuff if possible */
+	if (!is_pch_port)
+		goto done;
+
 	/* For PCH output, training FDI link */
 	if (IS_GEN6(dev))
 		gen6_fdi_link_train(crtc);
@@ -2184,7 +2263,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	I915_WRITE(reg, temp | TRANS_ENABLE);
 	if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
 		DRM_ERROR("failed to enable transcoder %d\n", pipe);
-
+done:
 	intel_crtc_load_lut(crtc);
 	intel_update_fbc(dev);
 	intel_crtc_update_cursor(crtc, true);
@@ -6496,7 +6575,7 @@ static void ironlake_disable_rc6(struct drm_device *dev)
 		POSTING_READ(RSTDBYCTL);
 	}
 
-	ironlake_disable_rc6(dev);
+	ironlake_teardown_rc6(dev);
 }
 
 static int ironlake_setup_rc6(struct drm_device *dev)