DRM: i915: add mode setting support

This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported.  HDMI, DisplayPort and additional SDVO output support will
follow.

Support for the mode setting code is controlled by the new 'modeset'
module option.  A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.

Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing.  So use caution when
enabling this code; be sure your user level code supports the new
interfaces.

A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.

Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 405 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
new file mode 100644
index 00000000000..5ea715ace3a
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -0,0 +1,405 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#ifndef _I830_BIOS_H_
+#define _I830_BIOS_H_
+
+#include "drmP.h"
+
+struct vbt_header {
+	u8 signature[20];		/**< Always starts with 'VBT$' */
+	u16 version;			/**< decimal */
+	u16 header_size;		/**< in bytes */
+	u16 vbt_size;			/**< in bytes */
+	u8 vbt_checksum;
+	u8 reserved0;
+	u32 bdb_offset;			/**< from beginning of VBT */
+	u32 aim_offset[4];		/**< from beginning of VBT */
+} __attribute__((packed));
+
+struct bdb_header {
+	u8 signature[16];		/**< Always 'BIOS_DATA_BLOCK' */
+	u16 version;			/**< decimal */
+	u16 header_size;		/**< in bytes */
+	u16 bdb_size;			/**< in bytes */
+};
+
+/* strictly speaking, this is a "skip" block, but it has interesting info */
+struct vbios_data {
+	u8 type; /* 0 == desktop, 1 == mobile */
+	u8 relstage;
+	u8 chipset;
+	u8 lvds_present:1;
+	u8 tv_present:1;
+	u8 rsvd2:6; /* finish byte */
+	u8 rsvd3[4];
+	u8 signon[155];
+	u8 copyright[61];
+	u16 code_segment;
+	u8 dos_boot_mode;
+	u8 bandwidth_percent;
+	u8 rsvd4; /* popup memory size */
+	u8 resize_pci_bios;
+	u8 rsvd5; /* is crt already on ddc2 */
+} __attribute__((packed));
+
+/*
+ * There are several types of BIOS data blocks (BDBs), each block has
+ * an ID and size in the first 3 bytes (ID in first, size in next 2).
+ * Known types are listed below.
+ */
+#define BDB_GENERAL_FEATURES	  1
+#define BDB_GENERAL_DEFINITIONS	  2
+#define BDB_OLD_TOGGLE_LIST	  3
+#define BDB_MODE_SUPPORT_LIST	  4
+#define BDB_GENERIC_MODE_TABLE	  5
+#define BDB_EXT_MMIO_REGS	  6
+#define BDB_SWF_IO		  7
+#define BDB_SWF_MMIO		  8
+#define BDB_DOT_CLOCK_TABLE	  9
+#define BDB_MODE_REMOVAL_TABLE	 10
+#define BDB_CHILD_DEVICE_TABLE	 11
+#define BDB_DRIVER_FEATURES	 12
+#define BDB_DRIVER_PERSISTENCE	 13
+#define BDB_EXT_TABLE_PTRS	 14
+#define BDB_DOT_CLOCK_OVERRIDE	 15
+#define BDB_DISPLAY_SELECT	 16
+/* 17 rsvd */
+#define BDB_DRIVER_ROTATION	 18
+#define BDB_DISPLAY_REMOVE	 19
+#define BDB_OEM_CUSTOM		 20
+#define BDB_EFP_LIST		 21 /* workarounds for VGA hsync/vsync */
+#define BDB_SDVO_LVDS_OPTIONS	 22
+#define BDB_SDVO_PANEL_DTDS	 23
+#define BDB_SDVO_LVDS_PNP_IDS	 24
+#define BDB_SDVO_LVDS_POWER_SEQ	 25
+#define BDB_TV_OPTIONS		 26
+#define BDB_LVDS_OPTIONS	 40
+#define BDB_LVDS_LFP_DATA_PTRS	 41
+#define BDB_LVDS_LFP_DATA	 42
+#define BDB_LVDS_BACKLIGHT	 43
+#define BDB_LVDS_POWER		 44
+#define BDB_SKIP		254 /* VBIOS private block, ignore */
+
+struct bdb_general_features {
+        /* bits 1 */
+	u8 panel_fitting:2;
+	u8 flexaim:1;
+	u8 msg_enable:1;
+	u8 clear_screen:3;
+	u8 color_flip:1;
+
+        /* bits 2 */
+	u8 download_ext_vbt:1;
+	u8 enable_ssc:1;
+	u8 ssc_freq:1;
+	u8 enable_lfp_on_override:1;
+	u8 disable_ssc_ddt:1;
+	u8 rsvd8:3; /* finish byte */
+
+        /* bits 3 */
+	u8 disable_smooth_vision:1;
+	u8 single_dvi:1;
+	u8 rsvd9:6; /* finish byte */
+
+        /* bits 4 */
+	u8 legacy_monitor_detect;
+
+        /* bits 5 */
+	u8 int_crt_support:1;
+	u8 int_tv_support:1;
+	u8 rsvd11:6; /* finish byte */
+} __attribute__((packed));
+
+struct bdb_general_definitions {
+	/* DDC GPIO */
+	u8 crt_ddc_gmbus_pin;
+
+	/* DPMS bits */
+	u8 dpms_acpi:1;
+	u8 skip_boot_crt_detect:1;
+	u8 dpms_aim:1;
+	u8 rsvd1:5; /* finish byte */
+
+	/* boot device bits */
+	u8 boot_display[2];
+	u8 child_dev_size;
+
+	/* device info */
+	u8 tv_or_lvds_info[33];
+	u8 dev1[33];
+	u8 dev2[33];
+	u8 dev3[33];
+	u8 dev4[33];
+	/* may be another device block here on some platforms */
+};
+
+struct bdb_lvds_options {
+	u8 panel_type;
+	u8 rsvd1;
+	/* LVDS capabilities, stored in a dword */
+	u8 rsvd2:1;
+	u8 lvds_edid:1;
+	u8 pixel_dither:1;
+	u8 pfit_ratio_auto:1;
+	u8 pfit_gfx_mode_enhanced:1;
+	u8 pfit_text_mode_enhanced:1;
+	u8 pfit_mode:2;
+	u8 rsvd4;
+} __attribute__((packed));
+
+/* LFP pointer table contains entries to the struct below */
+struct bdb_lvds_lfp_data_ptr {
+	u16 fp_timing_offset; /* offsets are from start of bdb */
+	u8 fp_table_size;
+	u16 dvo_timing_offset;
+	u8 dvo_table_size;
+	u16 panel_pnp_id_offset;
+	u8 pnp_table_size;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data_ptrs {
+	u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
+	struct bdb_lvds_lfp_data_ptr ptr[16];
+} __attribute__((packed));
+
+/* LFP data has 3 blocks per entry */
+struct lvds_fp_timing {
+	u16 x_res;
+	u16 y_res;
+	u32 lvds_reg;
+	u32 lvds_reg_val;
+	u32 pp_on_reg;
+	u32 pp_on_reg_val;
+	u32 pp_off_reg;
+	u32 pp_off_reg_val;
+	u32 pp_cycle_reg;
+	u32 pp_cycle_reg_val;
+	u32 pfit_reg;
+	u32 pfit_reg_val;
+	u16 terminator;
+} __attribute__((packed));
+
+struct lvds_dvo_timing {
+	u16 clock;		/**< In 10khz */
+	u8 hactive_lo;
+	u8 hblank_lo;
+	u8 hblank_hi:4;
+	u8 hactive_hi:4;
+	u8 vactive_lo;
+	u8 vblank_lo;
+	u8 vblank_hi:4;
+	u8 vactive_hi:4;
+	u8 hsync_off_lo;
+	u8 hsync_pulse_width;
+	u8 vsync_pulse_width:4;
+	u8 vsync_off:4;
+	u8 rsvd0:6;
+	u8 hsync_off_hi:2;
+	u8 h_image;
+	u8 v_image;
+	u8 max_hv;
+	u8 h_border;
+	u8 v_border;
+	u8 rsvd1:3;
+	u8 digital:2;
+	u8 vsync_positive:1;
+	u8 hsync_positive:1;
+	u8 rsvd2:1;
+} __attribute__((packed));
+
+struct lvds_pnp_id {
+	u16 mfg_name;
+	u16 product_code;
+	u32 serial;
+	u8 mfg_week;
+	u8 mfg_year;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data_entry {
+	struct lvds_fp_timing fp_timing;
+	struct lvds_dvo_timing dvo_timing;
+	struct lvds_pnp_id pnp_id;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data {
+	struct bdb_lvds_lfp_data_entry data[16];
+} __attribute__((packed));
+
+struct aimdb_header {
+	char signature[16];
+	char oem_device[20];
+	u16 aimdb_version;
+	u16 aimdb_header_size;
+	u16 aimdb_size;
+} __attribute__((packed));
+
+struct aimdb_block {
+	u8 aimdb_id;
+	u16 aimdb_size;
+} __attribute__((packed));
+
+struct vch_panel_data {
+	u16 fp_timing_offset;
+	u8 fp_timing_size;
+	u16 dvo_timing_offset;
+	u8 dvo_timing_size;
+	u16 text_fitting_offset;
+	u8 text_fitting_size;
+	u16 graphics_fitting_offset;
+	u8 graphics_fitting_size;
+} __attribute__((packed));
+
+struct vch_bdb_22 {
+	struct aimdb_block aimdb_block;
+	struct vch_panel_data panels[16];
+} __attribute__((packed));
+
+bool intel_init_bios(struct drm_device *dev);
+
+/*
+ * Driver<->VBIOS interaction occurs through scratch bits in
+ * GR18 & SWF*.
+ */
+
+/* GR18 bits are set on display switch and hotkey events */
+#define GR18_DRIVER_SWITCH_EN	(1<<7) /* 0: VBIOS control, 1: driver control */
+#define GR18_HOTKEY_MASK	0x78 /* See also SWF4 15:0 */
+#define   GR18_HK_NONE		(0x0<<3)
+#define   GR18_HK_LFP_STRETCH	(0x1<<3)
+#define   GR18_HK_TOGGLE_DISP	(0x2<<3)
+#define   GR18_HK_DISP_SWITCH	(0x4<<3) /* see SWF14 15:0 for what to enable */
+#define   GR18_HK_POPUP_DISABLED (0x6<<3)
+#define   GR18_HK_POPUP_ENABLED	(0x7<<3)
+#define   GR18_HK_PFIT		(0x8<<3)
+#define   GR18_HK_APM_CHANGE	(0xa<<3)
+#define   GR18_HK_MULTIPLE	(0xc<<3)
+#define GR18_USER_INT_EN	(1<<2)
+#define GR18_A0000_FLUSH_EN	(1<<1)
+#define GR18_SMM_EN		(1<<0)
+
+/* Set by driver, cleared by VBIOS */
+#define SWF00_YRES_SHIFT	16
+#define SWF00_XRES_SHIFT	0
+#define SWF00_RES_MASK		0xffff
+
+/* Set by VBIOS at boot time and driver at runtime */
+#define SWF01_TV2_FORMAT_SHIFT	8
+#define SWF01_TV1_FORMAT_SHIFT	0
+#define SWF01_TV_FORMAT_MASK	0xffff
+
+#define SWF10_VBIOS_BLC_I2C_EN	(1<<29)
+#define SWF10_GTT_OVERRIDE_EN	(1<<28)
+#define SWF10_LFP_DPMS_OVR	(1<<27) /* override DPMS on display switch */
+#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
+#define   SWF10_OLD_TOGGLE	0x0
+#define   SWF10_TOGGLE_LIST_1	0x1
+#define   SWF10_TOGGLE_LIST_2	0x2
+#define   SWF10_TOGGLE_LIST_3	0x3
+#define   SWF10_TOGGLE_LIST_4	0x4
+#define SWF10_PANNING_EN	(1<<23)
+#define SWF10_DRIVER_LOADED	(1<<22)
+#define SWF10_EXTENDED_DESKTOP	(1<<21)
+#define SWF10_EXCLUSIVE_MODE	(1<<20)
+#define SWF10_OVERLAY_EN	(1<<19)
+#define SWF10_PLANEB_HOLDOFF	(1<<18)
+#define SWF10_PLANEA_HOLDOFF	(1<<17)
+#define SWF10_VGA_HOLDOFF	(1<<16)
+#define SWF10_ACTIVE_DISP_MASK	0xffff
+#define   SWF10_PIPEB_LFP2	(1<<15)
+#define   SWF10_PIPEB_EFP2	(1<<14)
+#define   SWF10_PIPEB_TV2	(1<<13)
+#define   SWF10_PIPEB_CRT2	(1<<12)
+#define   SWF10_PIPEB_LFP	(1<<11)
+#define   SWF10_PIPEB_EFP	(1<<10)
+#define   SWF10_PIPEB_TV	(1<<9)
+#define   SWF10_PIPEB_CRT	(1<<8)
+#define   SWF10_PIPEA_LFP2	(1<<7)
+#define   SWF10_PIPEA_EFP2	(1<<6)
+#define   SWF10_PIPEA_TV2	(1<<5)
+#define   SWF10_PIPEA_CRT2	(1<<4)
+#define   SWF10_PIPEA_LFP	(1<<3)
+#define   SWF10_PIPEA_EFP	(1<<2)
+#define   SWF10_PIPEA_TV	(1<<1)
+#define   SWF10_PIPEA_CRT	(1<<0)
+
+#define SWF11_MEMORY_SIZE_SHIFT	16
+#define SWF11_SV_TEST_EN	(1<<15)
+#define SWF11_IS_AGP		(1<<14)
+#define SWF11_DISPLAY_HOLDOFF	(1<<13)
+#define SWF11_DPMS_REDUCED	(1<<12)
+#define SWF11_IS_VBE_MODE	(1<<11)
+#define SWF11_PIPEB_ACCESS	(1<<10) /* 0 here means pipe a */
+#define SWF11_DPMS_MASK		0x07
+#define   SWF11_DPMS_OFF	(1<<2)
+#define   SWF11_DPMS_SUSPEND	(1<<1)
+#define   SWF11_DPMS_STANDBY	(1<<0)
+#define   SWF11_DPMS_ON		0
+
+#define SWF14_GFX_PFIT_EN	(1<<31)
+#define SWF14_TEXT_PFIT_EN	(1<<30)
+#define SWF14_LID_STATUS_CLOSED	(1<<29) /* 0 here means open */
+#define SWF14_POPUP_EN		(1<<28)
+#define SWF14_DISPLAY_HOLDOFF	(1<<27)
+#define SWF14_DISP_DETECT_EN	(1<<26)
+#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
+#define SWF14_DRIVER_STATUS	(1<<24)
+#define SWF14_OS_TYPE_WIN9X	(1<<23)
+#define SWF14_OS_TYPE_WINNT	(1<<22)
+/* 21:19 rsvd */
+#define SWF14_PM_TYPE_MASK	0x00070000
+#define   SWF14_PM_ACPI_VIDEO	(0x4 << 16)
+#define   SWF14_PM_ACPI		(0x3 << 16)
+#define   SWF14_PM_APM_12	(0x2 << 16)
+#define   SWF14_PM_APM_11	(0x1 << 16)
+#define SWF14_HK_REQUEST_MASK	0x0000ffff /* see GR18 6:3 for event type */
+          /* if GR18 indicates a display switch */
+#define   SWF14_DS_PIPEB_LFP2_EN (1<<15)
+#define   SWF14_DS_PIPEB_EFP2_EN (1<<14)
+#define   SWF14_DS_PIPEB_TV2_EN  (1<<13)
+#define   SWF14_DS_PIPEB_CRT2_EN (1<<12)
+#define   SWF14_DS_PIPEB_LFP_EN  (1<<11)
+#define   SWF14_DS_PIPEB_EFP_EN  (1<<10)
+#define   SWF14_DS_PIPEB_TV_EN   (1<<9)
+#define   SWF14_DS_PIPEB_CRT_EN  (1<<8)
+#define   SWF14_DS_PIPEA_LFP2_EN (1<<7)
+#define   SWF14_DS_PIPEA_EFP2_EN (1<<6)
+#define   SWF14_DS_PIPEA_TV2_EN  (1<<5)
+#define   SWF14_DS_PIPEA_CRT2_EN (1<<4)
+#define   SWF14_DS_PIPEA_LFP_EN  (1<<3)
+#define   SWF14_DS_PIPEA_EFP_EN  (1<<2)
+#define   SWF14_DS_PIPEA_TV_EN   (1<<1)
+#define   SWF14_DS_PIPEA_CRT_EN  (1<<0)
+          /* if GR18 indicates a panel fitting request */
+#define   SWF14_PFIT_EN		(1<<0) /* 0 means disable */
+          /* if GR18 indicates an APM change request */
+#define   SWF14_APM_HIBERNATE	0x4
+#define   SWF14_APM_SUSPEND	0x3
+#define   SWF14_APM_STANDBY	0x1
+#define   SWF14_APM_RESTORE	0x0
+
+#endif /* _I830_BIOS_H_ */