Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6

* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  gpio/pch_gpio: Support new device ML7223
  gpio: make gpio_{request,free}_array gpio array parameter const
  GPIO: OMAP: move to drivers/gpio
  GPIO: OMAP: move register offset defines into <plat/gpio.h>
  gpio: Convert gpio_is_valid to return bool
  gpio: Move the s5pc100 GPIO to drivers/gpio
  gpio: Move the s5pv210 GPIO to drivers/gpio
  gpio: Move the exynos4 GPIO to drivers/gpio
  gpio: Move to Samsung common GPIO library to drivers/gpio
  gpio/nomadik: add function to read GPIO pull down status
  gpio/nomadik: show all pins in debug
  gpio: move Nomadik GPIO driver to drivers/gpio
  gpio: move U300 GPIO driver to drivers/gpio
  langwell_gpio: add runtime pm support
  gpio/pca953x: Add support for pca9574 and pca9575 devices
  gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535

13 files changed, 5289 insertions, 62 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d2136460375..592397629dd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -86,6 +86,30 @@ config GPIO_IT8761E
 	help
 	  Say yes here to support GPIO functionality of IT8761E super I/O chip.
 
+config GPIO_EXYNOS4
+	bool "Samsung Exynos4 GPIO library support"
+	default y if CPU_EXYNOS4210
+	help
+	  Say yes here to support Samsung Exynos4 series SoCs GPIO library
+
+config GPIO_PLAT_SAMSUNG
+	bool "Samsung SoCs GPIO library support"
+	default y if SAMSUNG_GPIOLIB_4BIT
+	help
+	  Say yes here to support Samsung SoCs GPIO library
+
+config GPIO_S5PC100
+	bool "Samsung S5PC100 GPIO library support"
+	default y if CPU_S5PC100
+	help
+	  Say yes here to support Samsung S5PC100 SoCs GPIO library
+
+config GPIO_S5PV210
+	bool "Samsung S5PV210/S5PC110 GPIO library support"
+	default y if CPU_S5PV210
+	help
+	  Say yes here to support Samsung S5PV210/S5PC110 SoCs GPIO library
+
 config GPIO_PL061
 	bool "PrimeCell PL061 GPIO support"
 	depends on ARM_AMBA
@@ -303,7 +327,7 @@ comment "PCI GPIO expanders:"
 
 config GPIO_CS5535
 	tristate "AMD CS5535/CS5536 GPIO support"
-	depends on PCI && X86 && !CS5535_GPIO
+	depends on PCI && X86 && !CS5535_GPIO && MFD_CS5535
 	help
 	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
 	  can be used for quite a number of things.  The CS5535/6 is found on
@@ -334,13 +358,19 @@ config GPIO_LANGWELL
 	  Say Y here to support Intel Langwell/Penwell GPIO.
 
 config GPIO_PCH
-	tristate "PCH GPIO of Intel Topcliff"
+	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
 	depends on PCI && X86
 	help
 	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  This driver can access PCH GPIO device.
 
+	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+	  Output Hub), ML7223.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7223 is companion chip for Intel Atom E6xx series.
+	  ML7223 is completely compatible for Intel EG20T PCH.
+
 config GPIO_ML_IOH
 	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
 	depends on PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 6a3387acc0e..b605f8ec6fb 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -8,6 +8,10 @@ obj-$(CONFIG_GPIO_ADP5520)	+= adp5520-gpio.o
 obj-$(CONFIG_GPIO_ADP5588)	+= adp5588-gpio.o
 obj-$(CONFIG_GPIO_BASIC_MMIO_CORE)	+= basic_mmio_gpio.o
 obj-$(CONFIG_GPIO_BASIC_MMIO)	+= basic_mmio_gpio.o
+obj-$(CONFIG_GPIO_EXYNOS4)	+= gpio-exynos4.o
+obj-$(CONFIG_GPIO_PLAT_SAMSUNG)	+= gpio-plat-samsung.o
+obj-$(CONFIG_GPIO_S5PC100)	+= gpio-s5pc100.o
+obj-$(CONFIG_GPIO_S5PV210)	+= gpio-s5pv210.o
 obj-$(CONFIG_GPIO_LANGWELL)	+= langwell_gpio.o
 obj-$(CONFIG_GPIO_MAX730X)	+= max730x.o
 obj-$(CONFIG_GPIO_MAX7300)	+= max7300.o
@@ -16,6 +20,7 @@ obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
 obj-$(CONFIG_GPIO_MC33880)	+= mc33880.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_74X164)	+= 74x164.o
+obj-$(CONFIG_ARCH_OMAP)         += gpio-omap.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= pch_gpio.o
@@ -34,6 +39,8 @@ obj-$(CONFIG_GPIO_WM831X)	+= wm831x-gpio.o
 obj-$(CONFIG_GPIO_WM8350)	+= wm8350-gpiolib.o
 obj-$(CONFIG_GPIO_WM8994)	+= wm8994-gpio.o
 obj-$(CONFIG_GPIO_SCH)		+= sch_gpio.o
+obj-$(CONFIG_MACH_U300)		+= gpio-u300.o
+obj-$(CONFIG_PLAT_NOMADIK)	+= gpio-nomadik.o
 obj-$(CONFIG_GPIO_RDC321X)	+= rdc321x-gpio.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= janz-ttl.o
 obj-$(CONFIG_GPIO_SX150X)	+= sx150x.o
diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c
new file mode 100644
index 00000000000..d54ca6adb66
--- /dev/null
+++ b/drivers/gpio/gpio-exynos4.c
@@ -0,0 +1,365 @@
+/* linux/arch/arm/mach-exynos4/gpiolib.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+/*
+ * Following are the gpio banks in v310.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPA0(0),
+			.ngpio	= EXYNOS4_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPA1(0),
+			.ngpio	= EXYNOS4_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPB(0),
+			.ngpio	= EXYNOS4_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPC0(0),
+			.ngpio	= EXYNOS4_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPC1(0),
+			.ngpio	= EXYNOS4_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPD0(0),
+			.ngpio	= EXYNOS4_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPD1(0),
+			.ngpio	= EXYNOS4_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE0(0),
+			.ngpio	= EXYNOS4_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE1(0),
+			.ngpio	= EXYNOS4_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE2(0),
+			.ngpio	= EXYNOS4_GPIO_E2_NR,
+			.label	= "GPE2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE3(0),
+			.ngpio	= EXYNOS4_GPIO_E3_NR,
+			.label	= "GPE3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE4(0),
+			.ngpio	= EXYNOS4_GPIO_E4_NR,
+			.label	= "GPE4",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF0(0),
+			.ngpio	= EXYNOS4_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF1(0),
+			.ngpio	= EXYNOS4_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF2(0),
+			.ngpio	= EXYNOS4_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF3(0),
+			.ngpio	= EXYNOS4_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	},
+};
+
+static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPJ0(0),
+			.ngpio	= EXYNOS4_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPJ1(0),
+			.ngpio	= EXYNOS4_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK0(0),
+			.ngpio	= EXYNOS4_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK1(0),
+			.ngpio	= EXYNOS4_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK2(0),
+			.ngpio	= EXYNOS4_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK3(0),
+			.ngpio	= EXYNOS4_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL0(0),
+			.ngpio	= EXYNOS4_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL1(0),
+			.ngpio	= EXYNOS4_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL2(0),
+			.ngpio	= EXYNOS4_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= EXYNOS4_GPY0(0),
+			.ngpio	= EXYNOS4_GPIO_Y0_NR,
+			.label	= "GPY0",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= EXYNOS4_GPY1(0),
+			.ngpio	= EXYNOS4_GPIO_Y1_NR,
+			.label	= "GPY1",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= EXYNOS4_GPY2(0),
+			.ngpio	= EXYNOS4_GPIO_Y2_NR,
+			.label	= "GPY2",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= EXYNOS4_GPY3(0),
+			.ngpio	= EXYNOS4_GPIO_Y3_NR,
+			.label	= "GPY3",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= EXYNOS4_GPY4(0),
+			.ngpio	= EXYNOS4_GPIO_Y4_NR,
+			.label	= "GPY4",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= EXYNOS4_GPY5(0),
+			.ngpio	= EXYNOS4_GPIO_Y5_NR,
+			.label	= "GPY5",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= EXYNOS4_GPY6(0),
+			.ngpio	= EXYNOS4_GPIO_Y6_NR,
+			.label	= "GPY6",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC00),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= EXYNOS4_GPX0(0),
+			.ngpio	= EXYNOS4_GPIO_X0_NR,
+			.label	= "GPX0",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC20),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= EXYNOS4_GPX1(0),
+			.ngpio	= EXYNOS4_GPIO_X1_NR,
+			.label	= "GPX1",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC40),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= EXYNOS4_GPX2(0),
+			.ngpio	= EXYNOS4_GPIO_X2_NR,
+			.label	= "GPX2",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC60),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= EXYNOS4_GPX3(0),
+			.ngpio	= EXYNOS4_GPIO_X3_NR,
+			.label	= "GPX3",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	},
+};
+
+static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPZ(0),
+			.ngpio	= EXYNOS4_GPIO_Z_NR,
+			.label	= "GPZ",
+		},
+	},
+};
+
+static __init int exynos4_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip;
+	int i;
+	int group = 0;
+	int nr_chips;
+
+	/* GPIO part 1 */
+
+	chip = exynos4_gpio_part1_4bit;
+	nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL) {
+			chip->config = &gpio_cfg;
+			/* Assign the GPIO interrupt group */
+			chip->group = group++;
+		}
+		if (chip->base == NULL)
+			chip->base = S5P_VA_GPIO1 + (i) * 0x20;
+	}
+
+	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
+
+	/* GPIO part 2 */
+
+	chip = exynos4_gpio_part2_4bit;
+	nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL) {
+			chip->config = &gpio_cfg;
+			/* Assign the GPIO interrupt group */
+			chip->group = group++;
+		}
+		if (chip->base == NULL)
+			chip->base = S5P_VA_GPIO2 + (i) * 0x20;
+	}
+
+	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
+
+	/* GPIO part 3 */
+
+	chip = exynos4_gpio_part3_4bit;
+	nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL) {
+			chip->config = &gpio_cfg;
+			/* Assign the GPIO interrupt group */
+			chip->group = group++;
+		}
+		if (chip->base == NULL)
+			chip->base = S5P_VA_GPIO3 + (i) * 0x20;
+	}
+
+	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
+	s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
+	s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
+
+	return 0;
+}
+core_initcall(exynos4_gpiolib_init);
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
new file mode 100644
index 00000000000..4961ef9bc15
--- /dev/null
+++ b/drivers/gpio/gpio-nomadik.c
@@ -0,0 +1,1069 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+#include <asm/mach/irq.h>
+
+#include <plat/pincfg.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions.  The logic block
+ * is currently used in the Nomadik and ux500.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP	32
+
+struct nmk_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *addr;
+	struct clk *clk;
+	unsigned int bank;
+	unsigned int parent_irq;
+	int secondary_parent_irq;
+	u32 (*get_secondary_status)(unsigned int bank);
+	void (*set_ioforce)(bool enable);
+	spinlock_t lock;
+	/* Keep track of configured edges */
+	u32 edge_rising;
+	u32 edge_falling;
+	u32 real_wake;
+	u32 rwimsc;
+	u32 fwimsc;
+	u32 slpm;
+	u32 enabled;
+	u32 pull_up;
+};
+
+static struct nmk_gpio_chip *
+nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)];
+
+static DEFINE_SPINLOCK(nmk_gpio_slpm_lock);
+
+#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips)
+
+static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, int gpio_mode)
+{
+	u32 bit = 1 << offset;
+	u32 afunc, bfunc;
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+}
+
+static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, enum nmk_gpio_slpm mode)
+{
+	u32 bit = 1 << offset;
+	u32 slpm;
+
+	slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
+	if (mode == NMK_GPIO_SLPM_NOCHANGE)
+		slpm |= bit;
+	else
+		slpm &= ~bit;
+	writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
+}
+
+static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, enum nmk_gpio_pull pull)
+{
+	u32 bit = 1 << offset;
+	u32 pdis;
+
+	pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
+	if (pull == NMK_GPIO_PULL_NONE) {
+		pdis |= bit;
+		nmk_chip->pull_up &= ~bit;
+	} else {
+		pdis &= ~bit;
+	}
+
+	writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
+
+	if (pull == NMK_GPIO_PULL_UP) {
+		nmk_chip->pull_up |= bit;
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	} else if (pull == NMK_GPIO_PULL_DOWN) {
+		nmk_chip->pull_up &= ~bit;
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+	}
+}
+
+static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset)
+{
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+}
+
+static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset, int val)
+{
+	if (val)
+		writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset, int val)
+{
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	__nmk_gpio_set_output(nmk_chip, offset, val);
+}
+
+static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip,
+				     unsigned offset, int gpio_mode,
+				     bool glitch)
+{
+	u32 rwimsc = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+	u32 fwimsc = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+
+	if (glitch && nmk_chip->set_ioforce) {
+		u32 bit = BIT(offset);
+
+		/* Prevent spurious wakeups */
+		writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC);
+		writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC);
+
+		nmk_chip->set_ioforce(true);
+	}
+
+	__nmk_gpio_set_mode(nmk_chip, offset, gpio_mode);
+
+	if (glitch && nmk_chip->set_ioforce) {
+		nmk_chip->set_ioforce(false);
+
+		writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC);
+		writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+}
+
+static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
+			     pin_cfg_t cfg, bool sleep, unsigned int *slpmregs)
+{
+	static const char *afnames[] = {
+		[NMK_GPIO_ALT_GPIO]	= "GPIO",
+		[NMK_GPIO_ALT_A]	= "A",
+		[NMK_GPIO_ALT_B]	= "B",
+		[NMK_GPIO_ALT_C]	= "C"
+	};
+	static const char *pullnames[] = {
+		[NMK_GPIO_PULL_NONE]	= "none",
+		[NMK_GPIO_PULL_UP]	= "up",
+		[NMK_GPIO_PULL_DOWN]	= "down",
+		[3] /* illegal */	= "??"
+	};
+	static const char *slpmnames[] = {
+		[NMK_GPIO_SLPM_INPUT]		= "input/wakeup",
+		[NMK_GPIO_SLPM_NOCHANGE]	= "no-change/no-wakeup",
+	};
+
+	int pin = PIN_NUM(cfg);
+	int pull = PIN_PULL(cfg);
+	int af = PIN_ALT(cfg);
+	int slpm = PIN_SLPM(cfg);
+	int output = PIN_DIR(cfg);
+	int val = PIN_VAL(cfg);
+	bool glitch = af == NMK_GPIO_ALT_C;
+
+	dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n",
+		pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm],
+		output ? "output " : "input",
+		output ? (val ? "high" : "low") : "");
+
+	if (sleep) {
+		int slpm_pull = PIN_SLPM_PULL(cfg);
+		int slpm_output = PIN_SLPM_DIR(cfg);
+		int slpm_val = PIN_SLPM_VAL(cfg);
+
+		af = NMK_GPIO_ALT_GPIO;
+
+		/*
+		 * The SLPM_* values are normal values + 1 to allow zero to
+		 * mean "same as normal".
+		 */
+		if (slpm_pull)
+			pull = slpm_pull - 1;
+		if (slpm_output)
+			output = slpm_output - 1;
+		if (slpm_val)
+			val = slpm_val - 1;
+
+		dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
+			pin,
+			slpm_pull ? pullnames[pull] : "same",
+			slpm_output ? (output ? "output" : "input") : "same",
+			slpm_val ? (val ? "high" : "low") : "same");
+	}
+
+	if (output)
+		__nmk_gpio_make_output(nmk_chip, offset, val);
+	else {
+		__nmk_gpio_make_input(nmk_chip, offset);
+		__nmk_gpio_set_pull(nmk_chip, offset, pull);
+	}
+
+	/*
+	 * If we've backed up the SLPM registers (glitch workaround), modify
+	 * the backups since they will be restored.
+	 */
+	if (slpmregs) {
+		if (slpm == NMK_GPIO_SLPM_NOCHANGE)
+			slpmregs[nmk_chip->bank] |= BIT(offset);
+		else
+			slpmregs[nmk_chip->bank] &= ~BIT(offset);
+	} else
+		__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
+
+	__nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch);
+}
+
+/*
+ * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+ *  - Save SLPM registers
+ *  - Set SLPM=0 for the IOs you want to switch and others to 1
+ *  - Configure the GPIO registers for the IOs that are being switched
+ *  - Set IOFORCE=1
+ *  - Modify the AFLSA/B registers for the IOs that are being switched
+ *  - Set IOFORCE=0
+ *  - Restore SLPM registers
+ *  - Any spurious wake up event during switch sequence to be ignored and
+ *    cleared
+ */
+static void nmk_gpio_glitch_slpm_init(unsigned int *slpm)
+{
+	int i;
+
+	for (i = 0; i < NUM_BANKS; i++) {
+		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
+		unsigned int temp = slpm[i];
+
+		if (!chip)
+			break;
+
+		slpm[i] = readl(chip->addr + NMK_GPIO_SLPC);
+		writel(temp, chip->addr + NMK_GPIO_SLPC);
+	}
+}
+
+static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm)
+{
+	int i;
+
+	for (i = 0; i < NUM_BANKS; i++) {
+		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
+
+		if (!chip)
+			break;
+
+		writel(slpm[i], chip->addr + NMK_GPIO_SLPC);
+	}
+}
+
+static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
+{
+	static unsigned int slpm[NUM_BANKS];
+	unsigned long flags;
+	bool glitch = false;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) {
+			glitch = true;
+			break;
+		}
+	}
+
+	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
+
+	if (glitch) {
+		memset(slpm, 0xff, sizeof(slpm));
+
+		for (i = 0; i < num; i++) {
+			int pin = PIN_NUM(cfgs[i]);
+			int offset = pin % NMK_GPIO_PER_CHIP;
+
+			if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C)
+				slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset);
+		}
+
+		nmk_gpio_glitch_slpm_init(slpm);
+	}
+
+	for (i = 0; i < num; i++) {
+		struct nmk_gpio_chip *nmk_chip;
+		int pin = PIN_NUM(cfgs[i]);
+
+		nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(pin));
+		if (!nmk_chip) {
+			ret = -EINVAL;
+			break;
+		}
+
+		spin_lock(&nmk_chip->lock);
+		__nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base,
+				 cfgs[i], sleep, glitch ? slpm : NULL);
+		spin_unlock(&nmk_chip->lock);
+	}
+
+	if (glitch)
+		nmk_gpio_glitch_slpm_restore(slpm);
+
+	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+
+	return ret;
+}
+
+/**
+ * nmk_config_pin - configure a pin's mux attributes
+ * @cfg: pin confguration
+ *
+ * Configures a pin's mode (alternate function or GPIO), its pull up status,
+ * and its sleep mode based on the specified configuration.  The @cfg is
+ * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
+ * are constructed using, and can be further enhanced with, the macros in
+ * plat/pincfg.h.
+ *
+ * If a pin's mode is set to GPIO, it is configured as an input to avoid
+ * side-effects.  The gpio can be manipulated later using standard GPIO API
+ * calls.
+ */
+int nmk_config_pin(pin_cfg_t cfg, bool sleep)
+{
+	return __nmk_config_pins(&cfg, 1, sleep);
+}
+EXPORT_SYMBOL(nmk_config_pin);
+
+/**
+ * nmk_config_pins - configure several pins at once
+ * @cfgs: array of pin configurations
+ * @num: number of elments in the array
+ *
+ * Configures several pins using nmk_config_pin().  Refer to that function for
+ * further information.
+ */
+int nmk_config_pins(pin_cfg_t *cfgs, int num)
+{
+	return __nmk_config_pins(cfgs, num, false);
+}
+EXPORT_SYMBOL(nmk_config_pins);
+
+int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num)
+{
+	return __nmk_config_pins(cfgs, num, true);
+}
+EXPORT_SYMBOL(nmk_config_pins_sleep);
+
+/**
+ * nmk_gpio_set_slpm() - configure the sleep mode of a pin
+ * @gpio: pin number
+ * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
+ *
+ * Sets the sleep mode of a pin.  If @mode is NMK_GPIO_SLPM_INPUT, the pin is
+ * changed to an input (with pullup/down enabled) in sleep and deep sleep.  If
+ * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
+ * configured even when in sleep and deep sleep.
+ *
+ * On DB8500v2 onwards, this setting loses the previous meaning and instead
+ * indicates if wakeup detection is enabled on the pin.  Note that
+ * enable_irq_wake() will automatically enable wakeup detection.
+ */
+int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
+	spin_lock(&nmk_chip->lock);
+
+	__nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode);
+
+	spin_unlock(&nmk_chip->lock);
+	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+
+	return 0;
+}
+
+/**
+ * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
+ * @gpio: pin number
+ * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
+ *
+ * Enables/disables pull up/down on a specified pin.  This only takes effect if
+ * the pin is configured as an input (either explicitly or by the alternate
+ * function).
+ *
+ * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
+ * configured as an input.  Otherwise, due to the way the controller registers
+ * work, this function will change the value output on the pin.
+ */
+int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
+/* Mode functions */
+/**
+ * nmk_gpio_set_mode() - set the mux mode of a gpio pin
+ * @gpio: pin number
+ * @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A,
+ *	       NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C
+ *
+ * Sets the mode of the specified pin to one of the alternate functions or
+ * plain GPIO.
+ */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(struct irq_data *d)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
+	nmk_chip = irq_data_get_irq_chip_data(d);
+	if (!nmk_chip)
+		return;
+	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+enum nmk_gpio_irq_type {
+	NORMAL,
+	WAKE,
+};
+
+static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
+				  int gpio, enum nmk_gpio_irq_type which,
+				  bool enable)
+{
+	u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC;
+	u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC;
+	u32 bitmask = nmk_gpio_get_bitmask(gpio);
+	u32 reg;
+
+	/* we must individually set/clear the two edges */
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + rimsc);
+		if (enable)
+			reg |= bitmask;
+		else
+			reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + rimsc);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + fimsc);
+		if (enable)
+			reg |= bitmask;
+		else
+			reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + fimsc);
+	}
+}
+
+static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
+				int gpio, bool on)
+{
+	__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
+}
+
+static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
+	nmk_chip = irq_data_get_irq_chip_data(d);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	if (enable)
+		nmk_chip->enabled |= bitmask;
+	else
+		nmk_chip->enabled &= ~bitmask;
+
+	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
+	spin_lock(&nmk_chip->lock);
+
+	__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, enable);
+
+	if (!(nmk_chip->real_wake & bitmask))
+		__nmk_gpio_set_wake(nmk_chip, gpio, enable);
+
+	spin_unlock(&nmk_chip->lock);
+	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+
+	return 0;
+}
+
+static void nmk_gpio_irq_mask(struct irq_data *d)
+{
+	nmk_gpio_irq_maskunmask(d, false);
+}
+
+static void nmk_gpio_irq_unmask(struct irq_data *d)
+{
+	nmk_gpio_irq_maskunmask(d, true);
+}
+
+static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+	int gpio;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
+	nmk_chip = irq_data_get_irq_chip_data(d);
+	if (!nmk_chip)
+		return -EINVAL;
+	bitmask = nmk_gpio_get_bitmask(gpio);
+
+	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
+	spin_lock(&nmk_chip->lock);
+
+	if (!(nmk_chip->enabled & bitmask))
+		__nmk_gpio_set_wake(nmk_chip, gpio, on);
+
+	if (on)
+		nmk_chip->real_wake |= bitmask;
+	else
+		nmk_chip->real_wake &= ~bitmask;
+
+	spin_unlock(&nmk_chip->lock);
+	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+
+	return 0;
+}
+
+static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	bool enabled, wake = irqd_is_wakeup_set(d);
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(d->irq);
+	nmk_chip = irq_data_get_irq_chip_data(d);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+
+	enabled = nmk_chip->enabled & bitmask;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+
+	if (enabled)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
+
+	if (enabled || wake)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false);
+
+	nmk_chip->edge_rising &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_RISING)
+		nmk_chip->edge_rising |= bitmask;
+
+	nmk_chip->edge_falling &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		nmk_chip->edge_falling |= bitmask;
+
+	if (enabled)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true);
+
+	if (enabled || wake)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
+
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+	.name		= "Nomadik-GPIO",
+	.irq_ack	= nmk_gpio_irq_ack,
+	.irq_mask	= nmk_gpio_irq_mask,
+	.irq_unmask	= nmk_gpio_irq_unmask,
+	.irq_set_type	= nmk_gpio_irq_set_type,
+	.irq_set_wake	= nmk_gpio_irq_set_wake,
+};
+
+static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
+				   u32 status)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct irq_chip *host_chip = irq_get_chip(irq);
+	unsigned int first_irq;
+
+	chained_irq_enter(host_chip, desc);
+
+	nmk_chip = irq_get_handler_data(irq);
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	while (status) {
+		int bit = __ffs(status);
+
+		generic_handle_irq(first_irq + bit);
+		status &= ~BIT(bit);
+	}
+
+	chained_irq_exit(host_chip, desc);
+}
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
+	u32 status = readl(nmk_chip->addr + NMK_GPIO_IS);
+
+	__nmk_gpio_irq_handler(irq, desc, status);
+}
+
+static void nmk_gpio_secondary_irq_handler(unsigned int irq,
+					   struct irq_desc *desc)
+{
+	struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
+	u32 status = nmk_chip->get_secondary_status(nmk_chip->bank);
+
+	__nmk_gpio_irq_handler(irq, desc, status);
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+	unsigned int first_irq;
+	int i;
+
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	for (i = first_irq; i < first_irq + nmk_chip->chip.ngpio; i++) {
+		irq_set_chip_and_handler(i, &nmk_gpio_irq_chip,
+					 handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+		irq_set_chip_data(i, nmk_chip);
+		irq_set_irq_type(i, IRQ_TYPE_EDGE_FALLING);
+	}
+
+	irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+	irq_set_handler_data(nmk_chip->parent_irq, nmk_chip);
+
+	if (nmk_chip->secondary_parent_irq >= 0) {
+		irq_set_chained_handler(nmk_chip->secondary_parent_irq,
+					nmk_gpio_secondary_irq_handler);
+		irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip);
+	}
+
+	return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+	return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	__nmk_gpio_set_output(nmk_chip, offset, val);
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	__nmk_gpio_make_output(nmk_chip, offset, val);
+
+	return 0;
+}
+
+static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#include <linux/seq_file.h>
+
+static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	int mode;
+	unsigned		i;
+	unsigned		gpio = chip->base;
+	int			is_out;
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	const char *modes[] = {
+		[NMK_GPIO_ALT_GPIO]	= "gpio",
+		[NMK_GPIO_ALT_A]	= "altA",
+		[NMK_GPIO_ALT_B]	= "altB",
+		[NMK_GPIO_ALT_C]	= "altC",
+	};
+
+	for (i = 0; i < chip->ngpio; i++, gpio++) {
+		const char *label = gpiochip_is_requested(chip, i);
+		bool pull;
+		u32 bit = 1 << i;
+
+		is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit;
+		pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit);
+		mode = nmk_gpio_get_mode(gpio);
+		seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s",
+			gpio, label ?: "(none)",
+			is_out ? "out" : "in ",
+			chip->get
+				? (chip->get(chip, i) ? "hi" : "lo")
+				: "?  ",
+			(mode < 0) ? "unknown" : modes[mode],
+			pull ? "pull" : "none");
+
+		if (label && !is_out) {
+			int		irq = gpio_to_irq(gpio);
+			struct irq_desc	*desc = irq_to_desc(irq);
+
+			/* This races with request_irq(), set_irq_type(),
+			 * and set_irq_wake() ... but those are "rare".
+			 */
+			if (irq >= 0 && desc->action) {
+				char *trigger;
+				u32 bitmask = nmk_gpio_get_bitmask(gpio);
+
+				if (nmk_chip->edge_rising & bitmask)
+					trigger = "edge-rising";
+				else if (nmk_chip->edge_falling & bitmask)
+					trigger = "edge-falling";
+				else
+					trigger = "edge-undefined";
+
+				seq_printf(s, " irq-%d %s%s",
+					irq, trigger,
+					irqd_is_wakeup_set(&desc->irq_data)
+						? " wakeup" : "");
+			}
+		}
+
+		seq_printf(s, "\n");
+	}
+}
+
+#else
+#define nmk_gpio_dbg_show	NULL
+#endif
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+	.direction_input	= nmk_gpio_make_input,
+	.get			= nmk_gpio_get_input,
+	.direction_output	= nmk_gpio_make_output,
+	.set			= nmk_gpio_set_output,
+	.to_irq			= nmk_gpio_to_irq,
+	.dbg_show		= nmk_gpio_dbg_show,
+	.can_sleep		= 0,
+};
+
+/*
+ * Called from the suspend/resume path to only keep the real wakeup interrupts
+ * (those that have had set_irq_wake() called on them) as wakeup interrupts,
+ * and not the rest of the interrupts which we needed to have as wakeups for
+ * cpuidle.
+ *
+ * PM ops are not used since this needs to be done at the end, after all the
+ * other drivers are done with their suspend callbacks.
+ */
+void nmk_gpio_wakeups_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < NUM_BANKS; i++) {
+		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
+
+		if (!chip)
+			break;
+
+		chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC);
+		chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC);
+
+		writel(chip->rwimsc & chip->real_wake,
+		       chip->addr + NMK_GPIO_RWIMSC);
+		writel(chip->fwimsc & chip->real_wake,
+		       chip->addr + NMK_GPIO_FWIMSC);
+
+		if (cpu_is_u8500v2()) {
+			chip->slpm = readl(chip->addr + NMK_GPIO_SLPC);
+
+			/* 0 -> wakeup enable */
+			writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC);
+		}
+	}
+}
+
+void nmk_gpio_wakeups_resume(void)
+{
+	int i;
+
+	for (i = 0; i < NUM_BANKS; i++) {
+		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
+
+		if (!chip)
+			break;
+
+		writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
+		writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
+
+		if (cpu_is_u8500v2())
+			writel(chip->slpm, chip->addr + NMK_GPIO_SLPC);
+	}
+}
+
+/*
+ * Read the pull up/pull down status.
+ * A bit set in 'pull_up' means that pull up
+ * is selected if pull is enabled in PDIS register.
+ * Note: only pull up/down set via this driver can
+ * be detected due to HW limitations.
+ */
+void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up)
+{
+	if (gpio_bank < NUM_BANKS) {
+		struct nmk_gpio_chip *chip = nmk_gpio_chips[gpio_bank];
+
+		if (!chip)
+			return;
+
+		*pull_up = chip->pull_up;
+	}
+}
+
+static int __devinit nmk_gpio_probe(struct platform_device *dev)
+{
+	struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
+	struct nmk_gpio_chip *nmk_chip;
+	struct gpio_chip *chip;
+	struct resource *res;
+	struct clk *clk;
+	int secondary_irq;
+	int irq;
+	int ret;
+
+	if (!pdata)
+		return -ENODEV;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENOENT;
+		goto out;
+	}
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out;
+	}
+
+	secondary_irq = platform_get_irq(dev, 1);
+	if (secondary_irq >= 0 && !pdata->get_secondary_status) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (request_mem_region(res->start, resource_size(res),
+			       dev_name(&dev->dev)) == NULL) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	clk = clk_get(&dev->dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto out_release;
+	}
+
+	clk_enable(clk);
+
+	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+	if (!nmk_chip) {
+		ret = -ENOMEM;
+		goto out_clk;
+	}
+	/*
+	 * The virt address in nmk_chip->addr is in the nomadik register space,
+	 * so we can simply convert the resource address, without remapping
+	 */
+	nmk_chip->bank = dev->id;
+	nmk_chip->clk = clk;
+	nmk_chip->addr = io_p2v(res->start);
+	nmk_chip->chip = nmk_gpio_template;
+	nmk_chip->parent_irq = irq;
+	nmk_chip->secondary_parent_irq = secondary_irq;
+	nmk_chip->get_secondary_status = pdata->get_secondary_status;
+	nmk_chip->set_ioforce = pdata->set_ioforce;
+	spin_lock_init(&nmk_chip->lock);
+
+	chip = &nmk_chip->chip;
+	chip->base = pdata->first_gpio;
+	chip->ngpio = pdata->num_gpio;
+	chip->label = pdata->name ?: dev_name(&dev->dev);
+	chip->dev = &dev->dev;
+	chip->owner = THIS_MODULE;
+
+	ret = gpiochip_add(&nmk_chip->chip);
+	if (ret)
+		goto out_free;
+
+	BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
+
+	nmk_gpio_chips[nmk_chip->bank] = nmk_chip;
+	platform_set_drvdata(dev, nmk_chip);
+
+	nmk_gpio_init_irq(nmk_chip);
+
+	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	return 0;
+
+out_free:
+	kfree(nmk_chip);
+out_clk:
+	clk_disable(clk);
+	clk_put(clk);
+out_release:
+	release_mem_region(res->start, resource_size(res));
+out:
+	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+		  pdata->first_gpio, pdata->first_gpio+31);
+	return ret;
+}
+
+static struct platform_driver nmk_gpio_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "gpio",
+	},
+	.probe = nmk_gpio_probe,
+};
+
+static int __init nmk_gpio_init(void)
+{
+	return platform_driver_register(&nmk_gpio_driver);
+}
+
+core_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
new file mode 100644
index 00000000000..6c51191da56
--- /dev/null
+++ b/drivers/gpio/gpio-omap.c
@@ -0,0 +1,2007 @@
+/*
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/syscore_ops.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <asm/mach/irq.h>
+
+struct gpio_bank {
+	unsigned long pbase;
+	void __iomem *base;
+	u16 irq;
+	u16 virtual_irq_start;
+	int method;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
+	u32 suspend_wakeup;
+	u32 saved_wakeup;
+#endif
+	u32 non_wakeup_gpios;
+	u32 enabled_non_wakeup_gpios;
+
+	u32 saved_datain;
+	u32 saved_fallingdetect;
+	u32 saved_risingdetect;
+	u32 level_mask;
+	u32 toggle_mask;
+	spinlock_t lock;
+	struct gpio_chip chip;
+	struct clk *dbck;
+	u32 mod_usage;
+	u32 dbck_enable_mask;
+	struct device *dev;
+	bool dbck_flag;
+	int stride;
+};
+
+#ifdef CONFIG_ARCH_OMAP3
+struct omap3_gpio_regs {
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+};
+
+static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
+#endif
+
+/*
+ * TODO: Cleanup gpio_bank usage as it is having information
+ * related to all instances of the device
+ */
+static struct gpio_bank *gpio_bank;
+
+static int bank_width;
+
+/* TODO: Analyze removing gpio_bank_count usage from driver code */
+int gpio_bank_count;
+
+static inline struct gpio_bank *get_gpio_bank(int gpio)
+{
+	if (cpu_is_omap15xx()) {
+		if (OMAP_GPIO_IS_MPUIO(gpio))
+			return &gpio_bank[0];
+		return &gpio_bank[1];
+	}
+	if (cpu_is_omap16xx()) {
+		if (OMAP_GPIO_IS_MPUIO(gpio))
+			return &gpio_bank[0];
+		return &gpio_bank[1 + (gpio >> 4)];
+	}
+	if (cpu_is_omap7xx()) {
+		if (OMAP_GPIO_IS_MPUIO(gpio))
+			return &gpio_bank[0];
+		return &gpio_bank[1 + (gpio >> 5)];
+	}
+	if (cpu_is_omap24xx())
+		return &gpio_bank[gpio >> 5];
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
+		return &gpio_bank[gpio >> 5];
+	BUG();
+	return NULL;
+}
+
+static inline int get_gpio_index(int gpio)
+{
+	if (cpu_is_omap7xx())
+		return gpio & 0x1f;
+	if (cpu_is_omap24xx())
+		return gpio & 0x1f;
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
+		return gpio & 0x1f;
+	return gpio & 0x0f;
+}
+
+static inline int gpio_valid(int gpio)
+{
+	if (gpio < 0)
+		return -1;
+	if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
+		if (gpio >= OMAP_MAX_GPIO_LINES + 16)
+			return -1;
+		return 0;
+	}
+	if (cpu_is_omap15xx() && gpio < 16)
+		return 0;
+	if ((cpu_is_omap16xx()) && gpio < 64)
+		return 0;
+	if (cpu_is_omap7xx() && gpio < 192)
+		return 0;
+	if (cpu_is_omap2420() && gpio < 128)
+		return 0;
+	if (cpu_is_omap2430() && gpio < 160)
+		return 0;
+	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
+		return 0;
+	return -1;
+}
+
+static int check_gpio(int gpio)
+{
+	if (unlikely(gpio_valid(gpio) < 0)) {
+		printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
+		dump_stack();
+		return -1;
+	}
+	return 0;
+}
+
+static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
+{
+	void __iomem *reg = bank->base;
+	u32 l;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DIR_CONTROL;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DIRECTION;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_OE;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return;
+	}
+	l = __raw_readl(reg);
+	if (is_input)
+		l |= 1 << gpio;
+	else
+		l &= ~(1 << gpio);
+	__raw_writel(l, reg);
+}
+
+static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT / bank->stride;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		if (enable)
+			reg += OMAP1610_GPIO_SET_DATAOUT;
+		else
+			reg += OMAP1610_GPIO_CLEAR_DATAOUT;
+		l = 1 << gpio;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP24XX_GPIO_SETDATAOUT;
+		else
+			reg += OMAP24XX_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		if (enable)
+			reg += OMAP4_GPIO_SETDATAOUT;
+		else
+			reg += OMAP4_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return;
+	}
+	__raw_writel(l, reg);
+}
+
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_INPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAIN;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_INPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAIN;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_DATAIN;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+	return (__raw_readl(reg)
+			& (1 << get_gpio_index(gpio))) != 0;
+}
+
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT / bank->stride;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAOUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAOUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_DATAOUT;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
+#define MOD_REG_BIT(reg, bit_mask, set)	\
+do {	\
+	int l = __raw_readl(base + reg); \
+	if (set) l |= bit_mask; \
+	else l &= ~bit_mask; \
+	__raw_writel(l, base + reg); \
+} while(0)
+
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+		unsigned debounce)
+{
+	void __iomem		*reg = bank->base;
+	u32			val;
+	u32			l;
+
+	if (!bank->dbck_flag)
+		return;
+
+	if (debounce < 32)
+		debounce = 0x01;
+	else if (debounce > 7936)
+		debounce = 0xff;
+	else
+		debounce = (debounce / 0x1f) - 1;
+
+	l = 1 << get_gpio_index(gpio);
+
+	if (bank->method == METHOD_GPIO_44XX)
+		reg += OMAP4_GPIO_DEBOUNCINGTIME;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
+	__raw_writel(debounce, reg);
+
+	reg = bank->base;
+	if (bank->method == METHOD_GPIO_44XX)
+		reg += OMAP4_GPIO_DEBOUNCENABLE;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
+	val = __raw_readl(reg);
+
+	if (debounce) {
+		val |= l;
+		clk_enable(bank->dbck);
+	} else {
+		val &= ~l;
+		clk_disable(bank->dbck);
+	}
+	bank->dbck_enable_mask = val;
+
+	__raw_writel(val, reg);
+}
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
+						int trigger)
+{
+	void __iomem *base = bank->base;
+	u32 gpio_bit = 1 << gpio;
+	u32 val;
+
+	if (cpu_is_omap44xx()) {
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	} else {
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	}
+	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
+		if (cpu_is_omap44xx()) {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base+
+						OMAP4_GPIO_IRQWAKEN0);
+			else {
+				val = __raw_readl(bank->base +
+							OMAP4_GPIO_IRQWAKEN0);
+				__raw_writel(val & (~(1 << gpio)), bank->base +
+							 OMAP4_GPIO_IRQWAKEN0);
+			}
+		} else {
+			/*
+			 * GPIO wakeup request can only be generated on edge
+			 * transitions
+			 */
+			if (trigger & IRQ_TYPE_EDGE_BOTH)
+				__raw_writel(1 << gpio, bank->base
+					+ OMAP24XX_GPIO_SETWKUENA);
+			else
+				__raw_writel(1 << gpio, bank->base
+					+ OMAP24XX_GPIO_CLEARWKUENA);
+		}
+	}
+	/* This part needs to be executed always for OMAP34xx */
+	if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+		/*
+		 * Log the edge gpio and manually trigger the IRQ
+		 * after resume if the input level changes
+		 * to avoid irq lost during PER RET/OFF mode
+		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
+		 */
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
+			bank->enabled_non_wakeup_gpios |= gpio_bit;
+		else
+			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
+	}
+
+	if (cpu_is_omap44xx()) {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+	} else {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	}
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once.  For all other chips, this function is a noop.
+ */
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
+		break;
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_CONTROL;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
+		break;
+#endif
+	default:
+		return;
+	}
+
+	l = __raw_readl(reg);
+	if ((l >> gpio) & 1)
+		l &= ~(1 << gpio);
+	else
+		l |= 1 << gpio;
+
+	__raw_writel(l, reg);
+}
+#endif
+
+static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
+		l = __raw_readl(reg);
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_CONTROL;
+		l = __raw_readl(reg);
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		if (gpio & 0x08)
+			reg += OMAP1610_GPIO_EDGE_CTRL2;
+		else
+			reg += OMAP1610_GPIO_EDGE_CTRL1;
+		gpio &= 0x07;
+		l = __raw_readl(reg);
+		l &= ~(3 << (gpio << 1));
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 2 << (gpio << 1);
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l |= 1 << (gpio << 1);
+		if (trigger)
+			/* Enable wake-up during idle for dynamic tick */
+			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
+		else
+			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
+		l = __raw_readl(reg);
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
+		set_24xx_gpio_triggering(bank, gpio, trigger);
+		return 0;
+#endif
+	default:
+		goto bad;
+	}
+	__raw_writel(l, reg);
+	return 0;
+bad:
+	return -EINVAL;
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned type)
+{
+	struct gpio_bank *bank;
+	unsigned gpio;
+	int retval;
+	unsigned long flags;
+
+	if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
+	else
+		gpio = d->irq - IH_GPIO_BASE;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+
+	if (type & ~IRQ_TYPE_SENSE_MASK)
+		return -EINVAL;
+
+	/* OMAP1 allows only only edge triggering */
+	if (!cpu_class_is_omap2()
+			&& (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
+		return -EINVAL;
+
+	bank = irq_data_get_irq_chip_data(d);
+	spin_lock_irqsave(&bank->lock, flags);
+	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		__irq_set_handler_locked(d->irq, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
+
+	return retval;
+}
+
+static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+	void __iomem *reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		/* MPUIO irqstatus is reset by reading the status register,
+		 * so do nothing here */
+		return;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_STATUS;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_IRQSTATUS1;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_STATUS;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_IRQSTATUS1;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_IRQSTATUS0;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return;
+	}
+	__raw_writel(gpio_mask, reg);
+
+	/* Workaround for clearing DSP GPIO interrupts to allow retention */
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
+	else if (cpu_is_omap44xx())
+		reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		__raw_writel(gpio_mask, reg);
+
+	/* Flush posted write for the irq status to avoid spurious interrupts */
+	__raw_readl(reg);
+	}
+}
+
+static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
+{
+	_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
+}
+
+static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+	void __iomem *reg = bank->base;
+	int inv = 0;
+	u32 l;
+	u32 mask;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+		mask = 0xffff;
+		inv = 1;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_MASK;
+		mask = 0xffff;
+		inv = 1;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_IRQENABLE1;
+		mask = 0xffff;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
+		mask = 0xffffffff;
+		inv = 1;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_IRQENABLE1;
+		mask = 0xffffffff;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_IRQSTATUSSET0;
+		mask = 0xffffffff;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	l = __raw_readl(reg);
+	if (inv)
+		l = ~l;
+	l &= mask;
+	return l;
+}
+
+static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
+{
+	void __iomem *reg = bank->base;
+	u32 l;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_MASK;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		if (enable)
+			reg += OMAP1610_GPIO_SET_IRQENABLE1;
+		else
+			reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
+		l = gpio_mask;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP24XX_GPIO_SETIRQENABLE1;
+		else
+			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
+		l = gpio_mask;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		if (enable)
+			reg += OMAP4_GPIO_IRQSTATUSSET0;
+		else
+			reg += OMAP4_GPIO_IRQSTATUSCLR0;
+		l = gpio_mask;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		return;
+	}
+	__raw_writel(l, reg);
+}
+
+static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
+{
+	_enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
+}
+
+/*
+ * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
+ * 1510 does not seem to have a wake-up register. If JTAG is connected
+ * to the target, system will wake up always on GPIO events. While
+ * system is running all registered GPIO interrupts need to have wake-up
+ * enabled. When system is suspended, only selected GPIO interrupts need
+ * to have wake-up enabled.
+ */
+static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
+{
+	unsigned long uninitialized_var(flags);
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_MPUIO:
+	case METHOD_GPIO_1610:
+		spin_lock_irqsave(&bank->lock, flags);
+		if (enable)
+			bank->suspend_wakeup |= (1 << gpio);
+		else
+			bank->suspend_wakeup &= ~(1 << gpio);
+		spin_unlock_irqrestore(&bank->lock, flags);
+		return 0;
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
+		if (bank->non_wakeup_gpios & (1 << gpio)) {
+			printk(KERN_ERR "Unable to modify wakeup on "
+					"non-wakeup GPIO%d\n",
+					(bank - gpio_bank) * 32 + gpio);
+			return -EINVAL;
+		}
+		spin_lock_irqsave(&bank->lock, flags);
+		if (enable)
+			bank->suspend_wakeup |= (1 << gpio);
+		else
+			bank->suspend_wakeup &= ~(1 << gpio);
+		spin_unlock_irqrestore(&bank->lock, flags);
+		return 0;
+#endif
+	default:
+		printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
+		       bank->method);
+		return -EINVAL;
+	}
+}
+
+static void _reset_gpio(struct gpio_bank *bank, int gpio)
+{
+	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
+	_set_gpio_irqenable(bank, gpio, 0);
+	_clear_gpio_irqstatus(bank, gpio);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+}
+
+/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
+static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank;
+	int retval;
+
+	if (check_gpio(gpio) < 0)
+		return -ENODEV;
+	bank = irq_data_get_irq_chip_data(d);
+	retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
+
+	return retval;
+}
+
+static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+
+	/* Set trigger to none. You need to enable the desired trigger with
+	 * request_irq() or set_irq_type().
+	 */
+	_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (bank->method == METHOD_GPIO_1510) {
+		void __iomem *reg;
+
+		/* Claim the pin for MPU */
+		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
+		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
+	}
+#endif
+	if (!cpu_class_is_omap1()) {
+		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
+			u32 ctrl;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
+			/* Module is enabled, clocks are not gated */
+			ctrl &= 0xFFFFFFFE;
+			__raw_writel(ctrl, reg);
+		}
+		bank->mod_usage |= 1 << offset;
+	}
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (bank->method == METHOD_GPIO_1610) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	if (bank->method == METHOD_GPIO_24XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (bank->method == METHOD_GPIO_44XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
+	if (!cpu_class_is_omap1()) {
+		bank->mod_usage &= ~(1 << offset);
+		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
+			u32 ctrl;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
+			/* Module is disabled, clocks are gated */
+			ctrl |= 1;
+			__raw_writel(ctrl, reg);
+		}
+	}
+	_reset_gpio(bank, bank->chip.base + offset);
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*
+ * We need to unmask the GPIO bank interrupt as soon as possible to
+ * avoid missing GPIO interrupts for other lines in the bank.
+ * Then we need to mask-read-clear-unmask the triggered GPIO lines
+ * in the bank to avoid missing nested interrupts for a GPIO line.
+ * If we wait to unmask individual GPIO lines in the bank after the
+ * line's interrupt handler has been run, we may miss some nested
+ * interrupts.
+ */
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *isr_reg = NULL;
+	u32 isr;
+	unsigned int gpio_irq, gpio_index;
+	struct gpio_bank *bank;
+	u32 retrigger = 0;
+	int unmasked = 0;
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+
+	bank = irq_get_handler_data(irq);
+#ifdef CONFIG_ARCH_OMAP1
+	if (bank->method == METHOD_MPUIO)
+		isr_reg = bank->base +
+				OMAP_MPUIO_GPIO_INT / bank->stride;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (bank->method == METHOD_GPIO_1510)
+		isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (bank->method == METHOD_GPIO_1610)
+		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (bank->method == METHOD_GPIO_7XX)
+		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	if (bank->method == METHOD_GPIO_24XX)
+		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	if (bank->method == METHOD_GPIO_44XX)
+		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
+#endif
+
+	if (WARN_ON(!isr_reg))
+		goto exit;
+
+	while(1) {
+		u32 isr_saved, level_mask = 0;
+		u32 enabled;
+
+		enabled = _get_gpio_irqbank_mask(bank);
+		isr_saved = isr = __raw_readl(isr_reg) & enabled;
+
+		if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
+			isr &= 0x0000ffff;
+
+		if (cpu_class_is_omap2()) {
+			level_mask = bank->level_mask & enabled;
+		}
+
+		/* clear edge sensitive interrupts before handler(s) are
+		called so that we don't miss any interrupt occurred while
+		executing them */
+		_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
+		_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
+		_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
+
+		/* if there is only edge sensitive GPIO pin interrupts
+		configured, we could unmask GPIO bank interrupt immediately */
+		if (!level_mask && !unmasked) {
+			unmasked = 1;
+			chained_irq_exit(chip, desc);
+		}
+
+		isr |= retrigger;
+		retrigger = 0;
+		if (!isr)
+			break;
+
+		gpio_irq = bank->virtual_irq_start;
+		for (; isr != 0; isr >>= 1, gpio_irq++) {
+			gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+
+			if (!(isr & 1))
+				continue;
+
+#ifdef CONFIG_ARCH_OMAP1
+			/*
+			 * Some chips can't respond to both rising and falling
+			 * at the same time.  If this irq was requested with
+			 * both flags, we need to flip the ICR data for the IRQ
+			 * to respond to the IRQ for the opposite direction.
+			 * This will be indicated in the bank toggle_mask.
+			 */
+			if (bank->toggle_mask & (1 << gpio_index))
+				_toggle_gpio_edge_triggering(bank, gpio_index);
+#endif
+
+			generic_handle_irq(gpio_irq);
+		}
+	}
+	/* if bank has any level sensitive GPIO pin interrupt
+	configured, we must unmask the bank interrupt only after
+	handler(s) are executed in order to avoid spurious bank
+	interrupt */
+exit:
+	if (!unmasked)
+		chained_irq_exit(chip, desc);
+}
+
+static void gpio_irq_shutdown(struct irq_data *d)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_reset_gpio(bank, gpio);
+}
+
+static void gpio_ack_irq(struct irq_data *d)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_clear_gpio_irqstatus(bank, gpio);
+}
+
+static void gpio_mask_irq(struct irq_data *d)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_set_gpio_irqenable(bank, gpio, 0);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+}
+
+static void gpio_unmask_irq(struct irq_data *d)
+{
+	unsigned int gpio = d->irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+	u32 trigger = irqd_get_trigger_type(d);
+
+	if (trigger)
+		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
+
+	/* For level-triggered GPIOs, the clearing must be done after
+	 * the HW source is cleared, thus after the handler has run */
+	if (bank->level_mask & irq_mask) {
+		_set_gpio_irqenable(bank, gpio, 0);
+		_clear_gpio_irqstatus(bank, gpio);
+	}
+
+	_set_gpio_irqenable(bank, gpio, 1);
+}
+
+static struct irq_chip gpio_irq_chip = {
+	.name		= "GPIO",
+	.irq_shutdown	= gpio_irq_shutdown,
+	.irq_ack	= gpio_ack_irq,
+	.irq_mask	= gpio_mask_irq,
+	.irq_unmask	= gpio_unmask_irq,
+	.irq_set_type	= gpio_irq_type,
+	.irq_set_wake	= gpio_wake_enable,
+};
+
+/*---------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+/* MPUIO uses the always-on 32k clock */
+
+static void mpuio_ack_irq(struct irq_data *d)
+{
+	/* The ISR is reset automatically, so do nothing here. */
+}
+
+static void mpuio_mask_irq(struct irq_data *d)
+{
+	unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_set_gpio_irqenable(bank, gpio, 0);
+}
+
+static void mpuio_unmask_irq(struct irq_data *d)
+{
+	unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
+	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	_set_gpio_irqenable(bank, gpio, 1);
+}
+
+static struct irq_chip mpuio_irq_chip = {
+	.name		= "MPUIO",
+	.irq_ack	= mpuio_ack_irq,
+	.irq_mask	= mpuio_mask_irq,
+	.irq_unmask	= mpuio_unmask_irq,
+	.irq_set_type	= gpio_irq_type,
+#ifdef CONFIG_ARCH_OMAP16XX
+	/* REVISIT: assuming only 16xx supports MPUIO wake events */
+	.irq_set_wake	= gpio_wake_enable,
+#endif
+};
+
+
+#define bank_is_mpuio(bank)	((bank)->method == METHOD_MPUIO)
+
+
+#ifdef CONFIG_ARCH_OMAP16XX
+
+#include <linux/platform_device.h>
+
+static int omap_mpuio_suspend_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank	*bank = platform_get_drvdata(pdev);
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+	bank->saved_wakeup = __raw_readl(mask_reg);
+	__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static int omap_mpuio_resume_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank	*bank = platform_get_drvdata(pdev);
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+	__raw_writel(bank->saved_wakeup, mask_reg);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+	.suspend_noirq = omap_mpuio_suspend_noirq,
+	.resume_noirq = omap_mpuio_resume_noirq,
+};
+
+/* use platform_driver for this. */
+static struct platform_driver omap_mpuio_driver = {
+	.driver		= {
+		.name	= "mpuio",
+		.pm	= &omap_mpuio_dev_pm_ops,
+	},
+};
+
+static struct platform_device omap_mpuio_device = {
+	.name		= "mpuio",
+	.id		= -1,
+	.dev = {
+		.driver = &omap_mpuio_driver.driver,
+	}
+	/* could list the /proc/iomem resources */
+};
+
+static inline void mpuio_init(void)
+{
+	struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
+	platform_set_drvdata(&omap_mpuio_device, bank);
+
+	if (platform_driver_register(&omap_mpuio_driver) == 0)
+		(void) platform_device_register(&omap_mpuio_device);
+}
+
+#else
+static inline void mpuio_init(void) {}
+#endif	/* 16xx */
+
+#else
+
+extern struct irq_chip mpuio_irq_chip;
+
+#define bank_is_mpuio(bank)	0
+static inline void mpuio_init(void) {}
+
+#endif
+
+/*---------------------------------------------------------------------*/
+
+/* REVISIT these are stupid implementations!  replace by ones that
+ * don't switch on METHOD_* and which mostly avoid spinlocks
+ */
+
+static int gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_direction(bank, offset, 1);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+	void __iomem *reg = bank->base;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
+		break;
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DIRECTION;
+		break;
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_OE;
+		break;
+	default:
+		WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+		return -EINVAL;
+	}
+	return __raw_readl(reg) & mask;
+}
+
+static int gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+	void __iomem *reg;
+	int gpio;
+	u32 mask;
+
+	gpio = chip->base + offset;
+	bank = get_gpio_bank(gpio);
+	reg = bank->base;
+	mask = 1 << get_gpio_index(gpio);
+
+	if (gpio_is_input(bank, mask))
+		return _get_gpio_datain(bank, gpio);
+	else
+		return _get_gpio_dataout(bank, gpio);
+}
+
+static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	_set_gpio_direction(bank, offset, 0);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+		unsigned debounce)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+
+	if (!bank->dbck) {
+		bank->dbck = clk_get(bank->dev, "dbclk");
+		if (IS_ERR(bank->dbck))
+			dev_err(bank->dev, "Could not get gpio dbck\n");
+	}
+
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_debounce(bank, offset, debounce);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	return bank->virtual_irq_start + offset;
+}
+
+/*---------------------------------------------------------------------*/
+
+static void __init omap_gpio_show_rev(struct gpio_bank *bank)
+{
+	u32 rev;
+
+	if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
+		rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
+	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
+	else if (cpu_is_omap44xx())
+		rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
+	else
+		return;
+
+	printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+		(rev >> 4) & 0x0f, rev & 0x0f);
+}
+
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static inline int init_gpio_info(struct platform_device *pdev)
+{
+	/* TODO: Analyze removing gpio_bank_count usage from driver code */
+	gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
+				GFP_KERNEL);
+	if (!gpio_bank) {
+		dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/* TODO: Cleanup cpu_is_* checks */
+static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
+{
+	if (cpu_class_is_omap2()) {
+		if (cpu_is_omap44xx()) {
+			__raw_writel(0xffffffff, bank->base +
+					OMAP4_GPIO_IRQSTATUSCLR0);
+			__raw_writel(0x00000000, bank->base +
+					 OMAP4_GPIO_DEBOUNCENABLE);
+			/* Initialize interface clk ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+		} else if (cpu_is_omap34xx()) {
+			__raw_writel(0x00000000, bank->base +
+					OMAP24XX_GPIO_IRQENABLE1);
+			__raw_writel(0xffffffff, bank->base +
+					OMAP24XX_GPIO_IRQSTATUS1);
+			__raw_writel(0x00000000, bank->base +
+					OMAP24XX_GPIO_DEBOUNCE_EN);
+
+			/* Initialize interface clk ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+		} else if (cpu_is_omap24xx()) {
+			static const u32 non_wakeup_gpios[] = {
+				0xe203ffc0, 0x08700040
+			};
+			if (id < ARRAY_SIZE(non_wakeup_gpios))
+				bank->non_wakeup_gpios = non_wakeup_gpios[id];
+		}
+	} else if (cpu_class_is_omap1()) {
+		if (bank_is_mpuio(bank))
+			__raw_writew(0xffff, bank->base +
+				OMAP_MPUIO_GPIO_MASKIT / bank->stride);
+		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
+			__raw_writew(0xffff, bank->base
+						+ OMAP1510_GPIO_INT_MASK);
+			__raw_writew(0x0000, bank->base
+						+ OMAP1510_GPIO_INT_STATUS);
+		}
+		if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
+			__raw_writew(0x0000, bank->base
+						+ OMAP1610_GPIO_IRQENABLE1);
+			__raw_writew(0xffff, bank->base
+						+ OMAP1610_GPIO_IRQSTATUS1);
+			__raw_writew(0x0014, bank->base
+						+ OMAP1610_GPIO_SYSCONFIG);
+
+			/*
+			 * Enable system clock for GPIO module.
+			 * The CAM_CLK_CTRL *is* really the right place.
+			 */
+			omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+						ULPD_CAM_CLK_CTRL);
+		}
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+			__raw_writel(0xffffffff, bank->base
+						+ OMAP7XX_GPIO_INT_MASK);
+			__raw_writel(0x00000000, bank->base
+						+ OMAP7XX_GPIO_INT_STATUS);
+		}
+	}
+}
+
+static void __init omap_gpio_chip_init(struct gpio_bank *bank)
+{
+	int j;
+	static int gpio;
+
+	bank->mod_usage = 0;
+	/*
+	 * REVISIT eventually switch from OMAP-specific gpio structs
+	 * over to the generic ones
+	 */
+	bank->chip.request = omap_gpio_request;
+	bank->chip.free = omap_gpio_free;
+	bank->chip.direction_input = gpio_input;
+	bank->chip.get = gpio_get;
+	bank->chip.direction_output = gpio_output;
+	bank->chip.set_debounce = gpio_debounce;
+	bank->chip.set = gpio_set;
+	bank->chip.to_irq = gpio_2irq;
+	if (bank_is_mpuio(bank)) {
+		bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP16XX
+		bank->chip.dev = &omap_mpuio_device.dev;
+#endif
+		bank->chip.base = OMAP_MPUIO(0);
+	} else {
+		bank->chip.label = "gpio";
+		bank->chip.base = gpio;
+		gpio += bank_width;
+	}
+	bank->chip.ngpio = bank_width;
+
+	gpiochip_add(&bank->chip);
+
+	for (j = bank->virtual_irq_start;
+		     j < bank->virtual_irq_start + bank_width; j++) {
+		irq_set_lockdep_class(j, &gpio_lock_class);
+		irq_set_chip_data(j, bank);
+		if (bank_is_mpuio(bank))
+			irq_set_chip(j, &mpuio_irq_chip);
+		else
+			irq_set_chip(j, &gpio_irq_chip);
+		irq_set_handler(j, handle_simple_irq);
+		set_irq_flags(j, IRQF_VALID);
+	}
+	irq_set_chained_handler(bank->irq, gpio_irq_handler);
+	irq_set_handler_data(bank->irq, bank);
+}
+
+static int __devinit omap_gpio_probe(struct platform_device *pdev)
+{
+	static int gpio_init_done;
+	struct omap_gpio_platform_data *pdata;
+	struct resource *res;
+	int id;
+	struct gpio_bank *bank;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	pdata = pdev->dev.platform_data;
+
+	if (!gpio_init_done) {
+		int ret;
+
+		ret = init_gpio_info(pdev);
+		if (ret)
+			return ret;
+	}
+
+	id = pdev->id;
+	bank = &gpio_bank[id];
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
+		return -ENODEV;
+	}
+
+	bank->irq = res->start;
+	bank->virtual_irq_start = pdata->virtual_irq_start;
+	bank->method = pdata->bank_type;
+	bank->dev = &pdev->dev;
+	bank->dbck_flag = pdata->dbck_flag;
+	bank->stride = pdata->bank_stride;
+	bank_width = pdata->bank_width;
+
+	spin_lock_init(&bank->lock);
+
+	/* Static mapping, never released */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
+		return -ENODEV;
+	}
+
+	bank->base = ioremap(res->start, resource_size(res));
+	if (!bank->base) {
+		dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
+		return -ENOMEM;
+	}
+
+	pm_runtime_enable(bank->dev);
+	pm_runtime_get_sync(bank->dev);
+
+	omap_gpio_mod_init(bank, id);
+	omap_gpio_chip_init(bank);
+	omap_gpio_show_rev(bank);
+
+	if (!gpio_init_done)
+		gpio_init_done = 1;
+
+	return 0;
+}
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
+static int omap_gpio_suspend(void)
+{
+	int i;
+
+	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
+		return 0;
+
+	for (i = 0; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		void __iomem *wake_status;
+		void __iomem *wake_clear;
+		void __iomem *wake_set;
+		unsigned long flags;
+
+		switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
+		case METHOD_GPIO_1610:
+			wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+		case METHOD_GPIO_24XX:
+			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
+			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_44XX:
+			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
+#endif
+		default:
+			continue;
+		}
+
+		spin_lock_irqsave(&bank->lock, flags);
+		bank->saved_wakeup = __raw_readl(wake_status);
+		__raw_writel(0xffffffff, wake_clear);
+		__raw_writel(bank->suspend_wakeup, wake_set);
+		spin_unlock_irqrestore(&bank->lock, flags);
+	}
+
+	return 0;
+}
+
+static void omap_gpio_resume(void)
+{
+	int i;
+
+	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
+		return;
+
+	for (i = 0; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		void __iomem *wake_clear;
+		void __iomem *wake_set;
+		unsigned long flags;
+
+		switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
+		case METHOD_GPIO_1610:
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+#endif
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+		case METHOD_GPIO_24XX:
+			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_44XX:
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
+#endif
+		default:
+			continue;
+		}
+
+		spin_lock_irqsave(&bank->lock, flags);
+		__raw_writel(0xffffffff, wake_clear);
+		__raw_writel(bank->saved_wakeup, wake_set);
+		spin_unlock_irqrestore(&bank->lock, flags);
+	}
+}
+
+static struct syscore_ops omap_gpio_syscore_ops = {
+	.suspend	= omap_gpio_suspend,
+	.resume		= omap_gpio_resume,
+};
+
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+static int workaround_enabled;
+
+void omap2_gpio_prepare_for_idle(int off_mode)
+{
+	int i, c = 0;
+	int min = 0;
+
+	if (cpu_is_omap34xx())
+		min = 1;
+
+	for (i = min; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		u32 l1 = 0, l2 = 0;
+		int j;
+
+		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
+			clk_disable(bank->dbck);
+
+		if (!off_mode)
+			continue;
+
+		/* If going to OFF, remove triggering for all
+		 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+		 * generated.  See OMAP2420 Errata item 1.101. */
+		if (!(bank->enabled_non_wakeup_gpios))
+			continue;
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			bank->saved_datain = __raw_readl(bank->base +
+					OMAP24XX_GPIO_DATAIN);
+			l1 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_FALLINGDETECT);
+			l2 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_RISINGDETECT);
+		}
+
+		if (cpu_is_omap44xx()) {
+			bank->saved_datain = __raw_readl(bank->base +
+						OMAP4_GPIO_DATAIN);
+			l1 = __raw_readl(bank->base +
+						OMAP4_GPIO_FALLINGDETECT);
+			l2 = __raw_readl(bank->base +
+						OMAP4_GPIO_RISINGDETECT);
+		}
+
+		bank->saved_fallingdetect = l1;
+		bank->saved_risingdetect = l2;
+		l1 &= ~bank->enabled_non_wakeup_gpios;
+		l2 &= ~bank->enabled_non_wakeup_gpios;
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			__raw_writel(l1, bank->base +
+					OMAP24XX_GPIO_FALLINGDETECT);
+			__raw_writel(l2, bank->base +
+					OMAP24XX_GPIO_RISINGDETECT);
+		}
+
+		if (cpu_is_omap44xx()) {
+			__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+			__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+		}
+
+		c++;
+	}
+	if (!c) {
+		workaround_enabled = 0;
+		return;
+	}
+	workaround_enabled = 1;
+}
+
+void omap2_gpio_resume_after_idle(void)
+{
+	int i;
+	int min = 0;
+
+	if (cpu_is_omap34xx())
+		min = 1;
+	for (i = min; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		u32 l = 0, gen, gen0, gen1;
+		int j;
+
+		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
+			clk_enable(bank->dbck);
+
+		if (!workaround_enabled)
+			continue;
+
+		if (!(bank->enabled_non_wakeup_gpios))
+			continue;
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			__raw_writel(bank->saved_fallingdetect,
+				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+			__raw_writel(bank->saved_risingdetect,
+				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
+			l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+		}
+
+		if (cpu_is_omap44xx()) {
+			__raw_writel(bank->saved_fallingdetect,
+				 bank->base + OMAP4_GPIO_FALLINGDETECT);
+			__raw_writel(bank->saved_risingdetect,
+				 bank->base + OMAP4_GPIO_RISINGDETECT);
+			l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
+		}
+
+		/* Check if any of the non-wakeup interrupt GPIOs have changed
+		 * state.  If so, generate an IRQ by software.  This is
+		 * horribly racy, but it's the best we can do to work around
+		 * this silicon bug. */
+		l ^= bank->saved_datain;
+		l &= bank->enabled_non_wakeup_gpios;
+
+		/*
+		 * No need to generate IRQs for the rising edge for gpio IRQs
+		 * configured with falling edge only; and vice versa.
+		 */
+		gen0 = l & bank->saved_fallingdetect;
+		gen0 &= bank->saved_datain;
+
+		gen1 = l & bank->saved_risingdetect;
+		gen1 &= ~(bank->saved_datain);
+
+		/* FIXME: Consider GPIO IRQs with level detections properly! */
+		gen = l & (~(bank->saved_fallingdetect) &
+				~(bank->saved_risingdetect));
+		/* Consider all GPIO IRQs needed to be updated */
+		gen |= gen0 | gen1;
+
+		if (gen) {
+			u32 old0, old1;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+				old0 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+				old1 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
+				__raw_writel(old0 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+				__raw_writel(old1 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
+				__raw_writel(old0, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+				__raw_writel(old1, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
+			}
+
+			if (cpu_is_omap44xx()) {
+				old0 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+				old1 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+				__raw_writel(old0 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+				__raw_writel(old1 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+				__raw_writel(old0, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+				__raw_writel(old1, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			}
+		}
+	}
+
+}
+
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+/* save the registers of bank 2-6 */
+void omap_gpio_save_context(void)
+{
+	int i;
+
+	/* saving banks from 2-6 only since GPIO1 is in WKUP */
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		gpio_context[i].irqenable1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		gpio_context[i].irqenable2 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		gpio_context[i].wake_en =
+			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+		gpio_context[i].ctrl =
+			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+		gpio_context[i].oe =
+			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
+		gpio_context[i].leveldetect0 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		gpio_context[i].leveldetect1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		gpio_context[i].risingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		gpio_context[i].fallingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		gpio_context[i].dataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
+	}
+}
+
+/* restore the required registers of bank 2-6 */
+void omap_gpio_restore_context(void)
+{
+	int i;
+
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		__raw_writel(gpio_context[i].irqenable1,
+				bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		__raw_writel(gpio_context[i].irqenable2,
+				bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		__raw_writel(gpio_context[i].wake_en,
+				bank->base + OMAP24XX_GPIO_WAKE_EN);
+		__raw_writel(gpio_context[i].ctrl,
+				bank->base + OMAP24XX_GPIO_CTRL);
+		__raw_writel(gpio_context[i].oe,
+				bank->base + OMAP24XX_GPIO_OE);
+		__raw_writel(gpio_context[i].leveldetect0,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		__raw_writel(gpio_context[i].leveldetect1,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		__raw_writel(gpio_context[i].risingdetect,
+				bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		__raw_writel(gpio_context[i].fallingdetect,
+				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		__raw_writel(gpio_context[i].dataout,
+				bank->base + OMAP24XX_GPIO_DATAOUT);
+	}
+}
+#endif
+
+static struct platform_driver omap_gpio_driver = {
+	.probe		= omap_gpio_probe,
+	.driver		= {
+		.name	= "omap_gpio",
+	},
+};
+
+/*
+ * gpio driver register needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap_gpio_drv_reg() is a postcore_initcall.
+ */
+static int __init omap_gpio_drv_reg(void)
+{
+	return platform_driver_register(&omap_gpio_driver);
+}
+postcore_initcall(omap_gpio_drv_reg);
+
+static int __init omap_gpio_sysinit(void)
+{
+	mpuio_init();
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
+	if (cpu_is_omap16xx() || cpu_class_is_omap2())
+		register_syscore_ops(&omap_gpio_syscore_ops);
+#endif
+
+	return 0;
+}
+
+arch_initcall(omap_gpio_sysinit);
diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c
new file mode 100644
index 00000000000..ea37c046178
--- /dev/null
+++ b/drivers/gpio/gpio-plat-samsung.c
@@ -0,0 +1,206 @@
+/* arch/arm/plat-samsung/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = samsung_gpiolib_4bit_input;
+	chip->chip.direction_output = samsung_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+	chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		samsung_gpiolib_add_4bit(chip);
+		s3c_gpiolib_add(chip);
+	}
+}
+
+void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+					    int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		samsung_gpiolib_add_4bit2(chip);
+		s3c_gpiolib_add(chip);
+	}
+}
+
+void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++)
+		s3c_gpiolib_add(chip);
+}
diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c
new file mode 100644
index 00000000000..2842394b28b
--- /dev/null
+++ b/drivers/gpio/gpio-s5pc100.c
@@ -0,0 +1,355 @@
+/* linux/arch/arm/mach-s5pc100/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ *  Copyright 2009 Samsung Electronics Co
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC100 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+	.cfg_eint	= 0xf,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+/*
+ * GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PC100_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in S5PC100.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+	{
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+};
+
+static __init int s5pc100_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
+	int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+	int gpioint_group = 0;
+	int i;
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL) {
+			chip->config = &gpio_cfg;
+			chip->group = gpioint_group++;
+		}
+		if (chip->base == NULL)
+			chip->base = S5PC100_BANK_BASE(i);
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
+	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+
+	return 0;
+}
+core_initcall(s5pc100_gpiolib_init);
diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c
new file mode 100644
index 00000000000..1ba20a703e0
--- /dev/null
+++ b/drivers/gpio/gpio-s5pv210.c
@@ -0,0 +1,288 @@
+/* linux/arch/arm/mach-s5pv210/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/map.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+/* GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PV210_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in v210.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
+	{
+		.chip	= {
+			.base	= S5PV210_GPA0(0),
+			.ngpio	= S5PV210_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPA1(0),
+			.ngpio	= S5PV210_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPB(0),
+			.ngpio	= S5PV210_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC0(0),
+			.ngpio	= S5PV210_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC1(0),
+			.ngpio	= S5PV210_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD0(0),
+			.ngpio	= S5PV210_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD1(0),
+			.ngpio	= S5PV210_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE0(0),
+			.ngpio	= S5PV210_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE1(0),
+			.ngpio	= S5PV210_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF0(0),
+			.ngpio	= S5PV210_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF1(0),
+			.ngpio	= S5PV210_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF2(0),
+			.ngpio	= S5PV210_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF3(0),
+			.ngpio	= S5PV210_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG0(0),
+			.ngpio	= S5PV210_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG1(0),
+			.ngpio	= S5PV210_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG2(0),
+			.ngpio	= S5PV210_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG3(0),
+			.ngpio	= S5PV210_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPI(0),
+			.ngpio	= S5PV210_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ0(0),
+			.ngpio	= S5PV210_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ1(0),
+			.ngpio	= S5PV210_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ2(0),
+			.ngpio	= S5PV210_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ3(0),
+			.ngpio	= S5PV210_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ4(0),
+			.ngpio	= S5PV210_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP01(0),
+			.ngpio	= S5PV210_GPIO_MP01_NR,
+			.label	= "MP01",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP02(0),
+			.ngpio	= S5PV210_GPIO_MP02_NR,
+			.label	= "MP02",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP03(0),
+			.ngpio	= S5PV210_GPIO_MP03_NR,
+			.label	= "MP03",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP04(0),
+			.ngpio	= S5PV210_GPIO_MP04_NR,
+			.label	= "MP04",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP05(0),
+			.ngpio	= S5PV210_GPIO_MP05_NR,
+			.label	= "MP05",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PV210_GPH0(0),
+			.ngpio	= S5PV210_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PV210_GPH1(0),
+			.ngpio	= S5PV210_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PV210_GPH2(0),
+			.ngpio	= S5PV210_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PV210_GPH3(0),
+			.ngpio	= S5PV210_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+};
+
+static __init int s5pv210_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
+	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+	int gpioint_group = 0;
+	int i = 0;
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL) {
+			chip->config = &gpio_cfg;
+			chip->group = gpioint_group++;
+		}
+		if (chip->base == NULL)
+			chip->base = S5PV210_BANK_BASE(i);
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
+	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+
+	return 0;
+}
+core_initcall(s5pv210_gpiolib_init);
diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
new file mode 100644
index 00000000000..d92790140fe
--- /dev/null
+++ b/drivers/gpio/gpio-u300.c
@@ -0,0 +1,700 @@
+/*
+ *
+ * arch/arm/mach-u300/gpio.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 GPIO module.
+ * This can driver either of the two basic GPIO cores
+ * available in the U300 platforms:
+ * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
+ * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
+ * Notice that you also have inline macros in <asm-arch/gpio.h>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+/* Reference to GPIO block clock */
+static struct clk *clk;
+
+/* Memory resource */
+static struct resource *memres;
+static void __iomem *virtbase;
+static struct device *gpiodev;
+
+struct u300_gpio_port {
+	const char *name;
+	int irq;
+	int number;
+};
+
+
+static struct u300_gpio_port gpio_ports[] = {
+	{
+		.name = "gpio0",
+		.number = 0,
+	},
+	{
+		.name = "gpio1",
+		.number = 1,
+	},
+	{
+		.name = "gpio2",
+		.number = 2,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name = "gpio3",
+		.number = 3,
+	},
+	{
+		.name = "gpio4",
+		.number = 4,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name = "gpio5",
+		.number = 5,
+	},
+	{
+		.name = "gpio6",
+		.number = 6,
+	},
+#endif
+#endif
+
+};
+
+
+#ifdef U300_COH901571_3
+
+/* Default input value */
+#define DEFAULT_OUTPUT_LOW   0
+#define DEFAULT_OUTPUT_HIGH  1
+
+/* GPIO Pull-Up status */
+#define DISABLE_PULL_UP  0
+#define ENABLE_PULL_UP  1
+
+#define GPIO_NOT_USED 0
+#define GPIO_IN       1
+#define GPIO_OUT      2
+
+struct u300_gpio_configuration_data {
+	unsigned char pin_usage;
+	unsigned char default_output_value;
+	unsigned char pull_up;
+};
+
+/* Initial configuration */
+const struct u300_gpio_configuration_data
+u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
+#ifdef CONFIG_MACH_U300_BS335
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 5, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 6, pind 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	}
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		/* These 4 pins doesn't exist on DB3210 */
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	}
+#endif
+};
+#endif
+
+
+/* No users == we can power down GPIO */
+static int gpio_users;
+
+struct gpio_struct {
+	int (*callback)(void *);
+	void *data;
+	int users;
+};
+
+static struct gpio_struct gpio_pin[U300_GPIO_MAX];
+
+/*
+ * Let drivers register callback in order to get notified when there is
+ * an interrupt on the gpio pin
+ */
+int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+{
+	if (gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "registered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = func;
+	gpio_pin[gpio].data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_register_callback);
+
+int gpio_unregister_callback(unsigned gpio)
+{
+	if (!gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "unregistered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = NULL;
+	gpio_pin[gpio].data = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_unregister_callback);
+
+/* Non-zero means valid */
+int gpio_is_valid(int number)
+{
+	if (number >= 0 &&
+	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
+		return 1;
+	return 0;
+}
+EXPORT_SYMBOL(gpio_is_valid);
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio_pin[gpio].users)
+		return -EINVAL;
+	else
+		gpio_pin[gpio].users++;
+
+	gpio_users++;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	gpio_users--;
+	gpio_pin[gpio].users--;
+	if (unlikely(gpio_pin[gpio].users < 0)) {
+		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
+			 gpio);
+		gpio_pin[gpio].users = 0;
+	}
+
+	return;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* This returns zero or nonzero */
+int gpio_get_value(unsigned gpio)
+{
+	return readl(virtbase + U300_GPIO_PXPDIR +
+	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+/*
+ * We hope that the compiler will optimize away the unused branch
+ * in case "value" is a constant
+ */
+void gpio_set_value(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		/* set */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val | (1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		/* clear */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val & ~(1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin*/
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/* This is not needed since it sets the bits to zero.*/
+	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/*
+	 * FIXME: configure for push/pull, open drain or open source per pin
+	 * in setup. The current driver will only support push/pull.
+	 */
+	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((gpio & 0x07) << 1));
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	gpio_set_value(gpio, value);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
+ */
+void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+{
+	u32 val;
+	unsigned long flags;
+	local_irq_save(flags);
+
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val |= (1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	if (edge)
+		val |= (1 << (gpio & 0x07));
+	else
+		val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(enable_irq_on_gpio_pin);
+
+void disable_irq_on_gpio_pin(unsigned gpio)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(disable_irq_on_gpio_pin);
+
+/* Enable (value == 0) or disable (value == 1) internal pullup */
+void gpio_pullup(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pullup);
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+	struct u300_gpio_port *port = dev_id;
+	u32 val;
+	int pin;
+
+	/* Read event register */
+	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask with enable register */
+	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask relevant bits */
+	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+	/* ACK IRQ (clear event) */
+	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Print message */
+	while (val != 0) {
+		unsigned gpio;
+
+		pin = __ffs(val);
+		/* mask off this pin */
+		val &= ~(1 << pin);
+		gpio = (port->number << 3) + pin;
+
+		if (gpio_pin[gpio].callback)
+			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
+		else
+			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
+			       gpio);
+	}
+	return IRQ_HANDLED;
+}
+
+static void gpio_set_initial_values(void)
+{
+#ifdef U300_COH901571_3
+	int i, j;
+	unsigned long flags;
+	u32 val;
+
+	/* Write default values to all pins */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+
+	/*
+	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
+	 * to output and 'GPIO_IN' to input for each port. And initialize
+	 * default value on outputs.
+	 */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
+			local_irq_save(flags);
+			val = readl(virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			/* Mask out this pin */
+			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+
+			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
+				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
+			writel(val, virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			local_irq_restore(flags);
+		}
+	}
+
+	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
+	for (i = 0; i < U300_GPIO_MAX; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+#endif
+}
+
+static int __init gpio_probe(struct platform_device *pdev)
+{
+	u32 val;
+	int err = 0;
+	int i;
+	int num_irqs;
+
+	gpiodev = &pdev->dev;
+	memset(gpio_pin, 0, sizeof(gpio_pin));
+
+	/* Get GPIO clock */
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(gpiodev, "could not get GPIO clock\n");
+		goto err_no_clk;
+	}
+	err = clk_enable(clk);
+	if (err) {
+		dev_err(gpiodev, "could not enable GPIO clock\n");
+		goto err_no_clk_enable;
+	}
+
+	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memres)
+		goto err_no_resource;
+
+	if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
+	    == NULL) {
+		err = -ENODEV;
+		goto err_no_ioregion;
+	}
+
+	virtbase = ioremap(memres->start, resource_size(memres));
+	if (!virtbase) {
+		err = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	dev_info(gpiodev, "remapped 0x%08x to %p\n",
+		 memres->start, virtbase);
+
+#ifdef U300_COH901335
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
+	/* Turn on the GPIO block */
+	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+#ifdef U300_COH901571_3
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
+	val = readl(virtbase + U300_GPIO_CR);
+	dev_info(gpiodev, "COH901571/3 block version: %d, " \
+	       "number of cores: %d\n",
+	       ((val & 0x0000FE00) >> 9),
+	       ((val & 0x000001FC) >> 2));
+	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+	gpio_set_initial_values();
+
+	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
+
+		gpio_ports[num_irqs].irq =
+			platform_get_irq_byname(pdev,
+						gpio_ports[num_irqs].name);
+
+		err = request_irq(gpio_ports[num_irqs].irq,
+				  gpio_irq_handler, IRQF_DISABLED,
+				  gpio_ports[num_irqs].name,
+				  &gpio_ports[num_irqs]);
+		if (err) {
+			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
+				gpio_ports[num_irqs].name);
+			goto err_no_irq;
+		}
+		/* Turns off PortX_irq_force */
+		writel(0x0, virtbase + U300_GPIO_PXIFR +
+				 num_irqs * U300_GPIO_PORTX_SPACING);
+	}
+
+	return 0;
+
+ err_no_irq:
+	for (i = 0; i < num_irqs; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+ err_no_ioremap:
+	release_mem_region(memres->start, memres->end - memres->start);
+ err_no_ioregion:
+ err_no_resource:
+	clk_disable(clk);
+ err_no_clk_enable:
+	clk_put(clk);
+ err_no_clk:
+	dev_info(gpiodev, "module ERROR:%d\n", err);
+	return err;
+}
+
+static int __exit gpio_remove(struct platform_device *pdev)
+{
+	int i;
+
+	/* Turn off the GPIO block */
+	writel(0x00000000U, virtbase + U300_GPIO_CR);
+	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+	release_mem_region(memres->start, memres->end - memres->start);
+	clk_disable(clk);
+	clk_put(clk);
+	return 0;
+}
+
+static struct platform_driver gpio_driver = {
+	.driver		= {
+		.name	= "u300-gpio",
+	},
+	.remove		= __exit_p(gpio_remove),
+};
+
+
+static int __init u300_gpio_init(void)
+{
+	return platform_driver_probe(&gpio_driver, gpio_probe);
+}
+
+static void __exit u300_gpio_exit(void)
+{
+	platform_driver_unregister(&gpio_driver);
+}
+
+arch_initcall(u300_gpio_init);
+module_exit(u300_gpio_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+
+#ifdef U300_COH901571_3
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
+#endif
+
+#ifdef U300_COH901335
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 137a8ca6782..a971e3d043b 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1296,7 +1296,7 @@ EXPORT_SYMBOL_GPL(gpio_request_one);
  * @array:	array of the 'struct gpio'
  * @num:	how many GPIOs in the array
  */
-int gpio_request_array(struct gpio *array, size_t num)
+int gpio_request_array(const struct gpio *array, size_t num)
 {
 	int i, err;
 
@@ -1319,7 +1319,7 @@ EXPORT_SYMBOL_GPL(gpio_request_array);
  * @array:	array of the 'struct gpio'
  * @num:	how many GPIOs in the array
  */
-void gpio_free_array(struct gpio *array, size_t num)
+void gpio_free_array(const struct gpio *array, size_t num)
 {
 	while (num--)
 		gpio_free((array++)->gpio);
diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c
index 1b06f67e1f6..bd6571e0097 100644
--- a/drivers/gpio/langwell_gpio.c
+++ b/drivers/gpio/langwell_gpio.c
@@ -33,6 +33,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 
 /*
  * Langwell chip has 64 pins and thus there are 2 32bit registers to control
@@ -63,6 +64,7 @@ struct lnw_gpio {
 	void				*reg_base;
 	spinlock_t			lock;
 	unsigned			irq_base;
+	struct pci_dev			*pdev;
 };
 
 static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
@@ -104,11 +106,18 @@ static int lnw_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 	u32 value;
 	unsigned long flags;
 
+	if (lnw->pdev)
+		pm_runtime_get(&lnw->pdev->dev);
+
 	spin_lock_irqsave(&lnw->lock, flags);
 	value = readl(gpdr);
 	value &= ~BIT(offset % 32);
 	writel(value, gpdr);
 	spin_unlock_irqrestore(&lnw->lock, flags);
+
+	if (lnw->pdev)
+		pm_runtime_put(&lnw->pdev->dev);
+
 	return 0;
 }
 
@@ -120,11 +129,19 @@ static int lnw_gpio_direction_output(struct gpio_chip *chip,
 	unsigned long flags;
 
 	lnw_gpio_set(chip, offset, value);
+
+	if (lnw->pdev)
+		pm_runtime_get(&lnw->pdev->dev);
+
 	spin_lock_irqsave(&lnw->lock, flags);
 	value = readl(gpdr);
 	value |= BIT(offset % 32);
 	writel(value, gpdr);
 	spin_unlock_irqrestore(&lnw->lock, flags);
+
+	if (lnw->pdev)
+		pm_runtime_put(&lnw->pdev->dev);
+
 	return 0;
 }
 
@@ -145,6 +162,10 @@ static int lnw_irq_type(struct irq_data *d, unsigned type)
 
 	if (gpio >= lnw->chip.ngpio)
 		return -EINVAL;
+
+	if (lnw->pdev)
+		pm_runtime_get(&lnw->pdev->dev);
+
 	spin_lock_irqsave(&lnw->lock, flags);
 	if (type & IRQ_TYPE_EDGE_RISING)
 		value = readl(grer) | BIT(gpio % 32);
@@ -159,6 +180,9 @@ static int lnw_irq_type(struct irq_data *d, unsigned type)
 	writel(value, gfer);
 	spin_unlock_irqrestore(&lnw->lock, flags);
 
+	if (lnw->pdev)
+		pm_runtime_put(&lnw->pdev->dev);
+
 	return 0;
 }
 
@@ -211,6 +235,39 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
 	chip->irq_eoi(data);
 }
 
+#ifdef CONFIG_PM
+static int lnw_gpio_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+
+static int lnw_gpio_runtime_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int lnw_gpio_runtime_idle(struct device *dev)
+{
+	int err = pm_schedule_suspend(dev, 500);
+
+	if (!err)
+		return 0;
+
+	return -EBUSY;
+}
+
+#else
+#define lnw_gpio_runtime_suspend	NULL
+#define lnw_gpio_runtime_resume		NULL
+#define lnw_gpio_runtime_idle		NULL
+#endif
+
+static const struct dev_pm_ops lnw_gpio_pm_ops = {
+	.runtime_suspend = lnw_gpio_runtime_suspend,
+	.runtime_resume = lnw_gpio_runtime_resume,
+	.runtime_idle = lnw_gpio_runtime_idle,
+};
+
 static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 			const struct pci_device_id *id)
 {
@@ -270,6 +327,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 	lnw->chip.base = gpio_base;
 	lnw->chip.ngpio = id->driver_data;
 	lnw->chip.can_sleep = 0;
+	lnw->pdev = pdev;
 	pci_set_drvdata(pdev, lnw);
 	retval = gpiochip_add(&lnw->chip);
 	if (retval) {
@@ -285,6 +343,10 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 	}
 
 	spin_lock_init(&lnw->lock);
+
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
+
 	goto done;
 err5:
 	kfree(lnw);
@@ -302,6 +364,9 @@ static struct pci_driver lnw_gpio_driver = {
 	.name		= "langwell_gpio",
 	.id_table	= lnw_gpio_ids,
 	.probe		= lnw_gpio_probe,
+	.driver		= {
+		.pm	= &lnw_gpio_pm_ops,
+	},
 };
 
 
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 78a843947d8..0451d7ac94a 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -24,33 +24,46 @@
 #include <linux/of_gpio.h>
 #endif
 
-#define PCA953X_INPUT          0
-#define PCA953X_OUTPUT         1
-#define PCA953X_INVERT         2
-#define PCA953X_DIRECTION      3
-
-#define PCA953X_GPIOS	       0x00FF
-#define PCA953X_INT	       0x0100
+#define PCA953X_INPUT		0
+#define PCA953X_OUTPUT		1
+#define PCA953X_INVERT		2
+#define PCA953X_DIRECTION	3
+
+#define PCA957X_IN		0
+#define PCA957X_INVRT		1
+#define PCA957X_BKEN		2
+#define PCA957X_PUPD		3
+#define PCA957X_CFG		4
+#define PCA957X_OUT		5
+#define PCA957X_MSK		6
+#define PCA957X_INTS		7
+
+#define PCA_GPIO_MASK		0x00FF
+#define PCA_INT			0x0100
+#define PCA953X_TYPE		0x1000
+#define PCA957X_TYPE		0x2000
 
 static const struct i2c_device_id pca953x_id[] = {
-	{ "pca9534", 8  | PCA953X_INT, },
-	{ "pca9535", 16 | PCA953X_INT, },
-	{ "pca9536", 4, },
-	{ "pca9537", 4  | PCA953X_INT, },
-	{ "pca9538", 8  | PCA953X_INT, },
-	{ "pca9539", 16 | PCA953X_INT, },
-	{ "pca9554", 8  | PCA953X_INT, },
-	{ "pca9555", 16 | PCA953X_INT, },
-	{ "pca9556", 8, },
-	{ "pca9557", 8, },
-
-	{ "max7310", 8, },
-	{ "max7312", 16 | PCA953X_INT, },
-	{ "max7313", 16 | PCA953X_INT, },
-	{ "max7315", 8  | PCA953X_INT, },
-	{ "pca6107", 8  | PCA953X_INT, },
-	{ "tca6408", 8  | PCA953X_INT, },
-	{ "tca6416", 16 | PCA953X_INT, },
+	{ "pca9534", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9536", 4  | PCA953X_TYPE, },
+	{ "pca9537", 4  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9538", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9554", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9556", 8  | PCA953X_TYPE, },
+	{ "pca9557", 8  | PCA953X_TYPE, },
+	{ "pca9574", 8  | PCA957X_TYPE | PCA_INT, },
+	{ "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
+
+	{ "max7310", 8  | PCA953X_TYPE, },
+	{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "max7315", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca6107", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "tca6408", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
 	/* NYET:  { "tca6424", 24, }, */
 	{ }
 };
@@ -75,16 +88,32 @@ struct pca953x_chip {
 	struct pca953x_platform_data *dyn_pdata;
 	struct gpio_chip gpio_chip;
 	const char *const *names;
+	int	chip_type;
 };
 
 static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
 {
-	int ret;
+	int ret = 0;
 
 	if (chip->gpio_chip.ngpio <= 8)
 		ret = i2c_smbus_write_byte_data(chip->client, reg, val);
-	else
-		ret = i2c_smbus_write_word_data(chip->client, reg << 1, val);
+	else {
+		switch (chip->chip_type) {
+		case PCA953X_TYPE:
+			ret = i2c_smbus_write_word_data(chip->client,
+							reg << 1, val);
+			break;
+		case PCA957X_TYPE:
+			ret = i2c_smbus_write_byte_data(chip->client, reg << 1,
+							val & 0xff);
+			if (ret < 0)
+				break;
+			ret = i2c_smbus_write_byte_data(chip->client,
+							(reg << 1) + 1,
+							(val & 0xff00) >> 8);
+			break;
+		}
+	}
 
 	if (ret < 0) {
 		dev_err(&chip->client->dev, "failed writing register\n");
@@ -116,13 +145,22 @@ static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
 {
 	struct pca953x_chip *chip;
 	uint16_t reg_val;
-	int ret;
+	int ret, offset = 0;
 
 	chip = container_of(gc, struct pca953x_chip, gpio_chip);
 
 	mutex_lock(&chip->i2c_lock);
 	reg_val = chip->reg_direction | (1u << off);
-	ret = pca953x_write_reg(chip, PCA953X_DIRECTION, reg_val);
+
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_DIRECTION;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_CFG;
+		break;
+	}
+	ret = pca953x_write_reg(chip, offset, reg_val);
 	if (ret)
 		goto exit;
 
@@ -138,7 +176,7 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
 {
 	struct pca953x_chip *chip;
 	uint16_t reg_val;
-	int ret;
+	int ret, offset = 0;
 
 	chip = container_of(gc, struct pca953x_chip, gpio_chip);
 
@@ -149,7 +187,15 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
 	else
 		reg_val = chip->reg_output & ~(1u << off);
 
-	ret = pca953x_write_reg(chip, PCA953X_OUTPUT, reg_val);
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_OUTPUT;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_OUT;
+		break;
+	}
+	ret = pca953x_write_reg(chip, offset, reg_val);
 	if (ret)
 		goto exit;
 
@@ -157,7 +203,15 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
 
 	/* then direction */
 	reg_val = chip->reg_direction & ~(1u << off);
-	ret = pca953x_write_reg(chip, PCA953X_DIRECTION, reg_val);
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_DIRECTION;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_CFG;
+		break;
+	}
+	ret = pca953x_write_reg(chip, offset, reg_val);
 	if (ret)
 		goto exit;
 
@@ -172,12 +226,20 @@ static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
 {
 	struct pca953x_chip *chip;
 	uint16_t reg_val;
-	int ret;
+	int ret, offset = 0;
 
 	chip = container_of(gc, struct pca953x_chip, gpio_chip);
 
 	mutex_lock(&chip->i2c_lock);
-	ret = pca953x_read_reg(chip, PCA953X_INPUT, &reg_val);
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_INPUT;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_IN;
+		break;
+	}
+	ret = pca953x_read_reg(chip, offset, &reg_val);
 	mutex_unlock(&chip->i2c_lock);
 	if (ret < 0) {
 		/* NOTE:  diagnostic already emitted; that's all we should
@@ -194,7 +256,7 @@ static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
 {
 	struct pca953x_chip *chip;
 	uint16_t reg_val;
-	int ret;
+	int ret, offset = 0;
 
 	chip = container_of(gc, struct pca953x_chip, gpio_chip);
 
@@ -204,7 +266,15 @@ static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
 	else
 		reg_val = chip->reg_output & ~(1u << off);
 
-	ret = pca953x_write_reg(chip, PCA953X_OUTPUT, reg_val);
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_OUTPUT;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_OUT;
+		break;
+	}
+	ret = pca953x_write_reg(chip, offset, reg_val);
 	if (ret)
 		goto exit;
 
@@ -322,9 +392,17 @@ static uint16_t pca953x_irq_pending(struct pca953x_chip *chip)
 	uint16_t old_stat;
 	uint16_t pending;
 	uint16_t trigger;
-	int ret;
-
-	ret = pca953x_read_reg(chip, PCA953X_INPUT, &cur_stat);
+	int ret, offset = 0;
+
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_INPUT;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_IN;
+		break;
+	}
+	ret = pca953x_read_reg(chip, offset, &cur_stat);
 	if (ret)
 		return 0;
 
@@ -372,14 +450,21 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 {
 	struct i2c_client *client = chip->client;
 	struct pca953x_platform_data *pdata = client->dev.platform_data;
-	int ret;
+	int ret, offset = 0;
 
 	if (pdata->irq_base != -1
-			&& (id->driver_data & PCA953X_INT)) {
+			&& (id->driver_data & PCA_INT)) {
 		int lvl;
 
-		ret = pca953x_read_reg(chip, PCA953X_INPUT,
-				       &chip->irq_stat);
+		switch (chip->chip_type) {
+		case PCA953X_TYPE:
+			offset = PCA953X_INPUT;
+			break;
+		case PCA957X_TYPE:
+			offset = PCA957X_IN;
+			break;
+		}
+		ret = pca953x_read_reg(chip, offset, &chip->irq_stat);
 		if (ret)
 			goto out_failed;
 
@@ -439,7 +524,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 	struct i2c_client *client = chip->client;
 	struct pca953x_platform_data *pdata = client->dev.platform_data;
 
-	if (pdata->irq_base != -1 && (id->driver_data & PCA953X_INT))
+	if (pdata->irq_base != -1 && (id->driver_data & PCA_INT))
 		dev_warn(&client->dev, "interrupt support not compiled in\n");
 
 	return 0;
@@ -499,12 +584,65 @@ pca953x_get_alt_pdata(struct i2c_client *client)
 }
 #endif
 
+static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert)
+{
+	int ret;
+
+	ret = pca953x_read_reg(chip, PCA953X_OUTPUT, &chip->reg_output);
+	if (ret)
+		goto out;
+
+	ret = pca953x_read_reg(chip, PCA953X_DIRECTION,
+			       &chip->reg_direction);
+	if (ret)
+		goto out;
+
+	/* set platform specific polarity inversion */
+	ret = pca953x_write_reg(chip, PCA953X_INVERT, invert);
+	if (ret)
+		goto out;
+	return 0;
+out:
+	return ret;
+}
+
+static int __devinit device_pca957x_init(struct pca953x_chip *chip, int invert)
+{
+	int ret;
+	uint16_t val = 0;
+
+	/* Let every port in proper state, that could save power */
+	pca953x_write_reg(chip, PCA957X_PUPD, 0x0);
+	pca953x_write_reg(chip, PCA957X_CFG, 0xffff);
+	pca953x_write_reg(chip, PCA957X_OUT, 0x0);
+
+	ret = pca953x_read_reg(chip, PCA957X_IN, &val);
+	if (ret)
+		goto out;
+	ret = pca953x_read_reg(chip, PCA957X_OUT, &chip->reg_output);
+	if (ret)
+		goto out;
+	ret = pca953x_read_reg(chip, PCA957X_CFG, &chip->reg_direction);
+	if (ret)
+		goto out;
+
+	/* set platform specific polarity inversion */
+	pca953x_write_reg(chip, PCA957X_INVRT, invert);
+
+	/* To enable register 6, 7 to controll pull up and pull down */
+	pca953x_write_reg(chip, PCA957X_BKEN, 0x202);
+
+	return 0;
+out:
+	return ret;
+}
+
 static int __devinit pca953x_probe(struct i2c_client *client,
 				   const struct i2c_device_id *id)
 {
 	struct pca953x_platform_data *pdata;
 	struct pca953x_chip *chip;
-	int ret;
+	int ret = 0;
 
 	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
 	if (chip == NULL)
@@ -531,25 +669,20 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	chip->gpio_start = pdata->gpio_base;
 
 	chip->names = pdata->names;
+	chip->chip_type = id->driver_data & (PCA953X_TYPE | PCA957X_TYPE);
 
 	mutex_init(&chip->i2c_lock);
 
 	/* initialize cached registers from their original values.
 	 * we can't share this chip with another i2c master.
 	 */
-	pca953x_setup_gpio(chip, id->driver_data & PCA953X_GPIOS);
+	pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK);
 
-	ret = pca953x_read_reg(chip, PCA953X_OUTPUT, &chip->reg_output);
-	if (ret)
-		goto out_failed;
-
-	ret = pca953x_read_reg(chip, PCA953X_DIRECTION, &chip->reg_direction);
-	if (ret)
-		goto out_failed;
-
-	/* set platform specific polarity inversion */
-	ret = pca953x_write_reg(chip, PCA953X_INVERT, pdata->invert);
-	if (ret)
+	if (chip->chip_type == PCA953X_TYPE)
+		device_pca953x_init(chip, pdata->invert);
+	else if (chip->chip_type == PCA957X_TYPE)
+		device_pca957x_init(chip, pdata->invert);
+	else
 		goto out_failed;
 
 	ret = pca953x_irq_setup(chip, id);
diff --git a/drivers/gpio/pch_gpio.c b/drivers/gpio/pch_gpio.c
index f970a5f3585..36919e77c49 100644
--- a/drivers/gpio/pch_gpio.c
+++ b/drivers/gpio/pch_gpio.c
@@ -283,8 +283,10 @@ static int pch_gpio_resume(struct pci_dev *pdev)
 #define pch_gpio_resume NULL
 #endif
 
+#define PCI_VENDOR_ID_ROHM             0x10DB
 static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);