Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd

Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...

3 files changed, 251 insertions, 0 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 25ce03eff6a..50cc557abe4 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -406,6 +406,14 @@ config GPIO_ARIZONA
 	help
 	  Support for GPIOs on Wolfson Arizona class devices.
 
+config GPIO_LP3943
+	tristate "TI/National Semiconductor LP3943 GPIO expander"
+	depends on MFD_LP3943
+	help
+	  GPIO driver for LP3943 MFD.
+	  LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
+	  Open drain outputs are required for this usage.
+
 config GPIO_MAX7300
 	tristate "Maxim MAX7300 GPIO expander"
 	depends on I2C
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c44fffac951..0248471402e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
 obj-$(CONFIG_GPIO_KEMPLD)	+= gpio-kempld.o
 obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_INTEL_MID)	+= gpio-intel-mid.o
+obj-$(CONFIG_GPIO_LP3943)	+= gpio-lp3943.o
 obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_LYNXPOINT)	+= gpio-lynxpoint.o
 obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o
diff --git a/drivers/gpio/gpio-lp3943.c b/drivers/gpio/gpio-lp3943.c
new file mode 100644
index 00000000000..a0341c92bcb
--- /dev/null
+++ b/drivers/gpio/gpio-lp3943.c
@@ -0,0 +1,242 @@
+/*
+ * TI/National Semiconductor LP3943 GPIO driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mfd/lp3943.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum lp3943_gpios {
+	LP3943_GPIO1,
+	LP3943_GPIO2,
+	LP3943_GPIO3,
+	LP3943_GPIO4,
+	LP3943_GPIO5,
+	LP3943_GPIO6,
+	LP3943_GPIO7,
+	LP3943_GPIO8,
+	LP3943_GPIO9,
+	LP3943_GPIO10,
+	LP3943_GPIO11,
+	LP3943_GPIO12,
+	LP3943_GPIO13,
+	LP3943_GPIO14,
+	LP3943_GPIO15,
+	LP3943_GPIO16,
+	LP3943_MAX_GPIO,
+};
+
+struct lp3943_gpio {
+	struct gpio_chip chip;
+	struct lp3943 *lp3943;
+	u16 input_mask;		/* 1 = GPIO is input direction, 0 = output */
+};
+
+static inline struct lp3943_gpio *to_lp3943_gpio(struct gpio_chip *_chip)
+{
+	return container_of(_chip, struct lp3943_gpio, chip);
+}
+
+static int lp3943_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+
+	/* Return an error if the pin is already assigned */
+	if (test_and_set_bit(offset, &lp3943->pin_used))
+		return -EBUSY;
+
+	return 0;
+}
+
+static void lp3943_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+
+	clear_bit(offset, &lp3943->pin_used);
+}
+
+static int lp3943_gpio_set_mode(struct lp3943_gpio *lp3943_gpio, u8 offset,
+				u8 val)
+{
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+
+	return lp3943_update_bits(lp3943, mux[offset].reg, mux[offset].mask,
+				  val << mux[offset].shift);
+}
+
+static int lp3943_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+	lp3943_gpio->input_mask |= BIT(offset);
+
+	return lp3943_gpio_set_mode(lp3943_gpio, offset, LP3943_GPIO_IN);
+}
+
+static int lp3943_get_gpio_in_status(struct lp3943_gpio *lp3943_gpio,
+				     struct gpio_chip *chip, unsigned offset)
+{
+	u8 addr, read;
+	int err;
+
+	switch (offset) {
+	case LP3943_GPIO1 ... LP3943_GPIO8:
+		addr = LP3943_REG_GPIO_A;
+		break;
+	case LP3943_GPIO9 ... LP3943_GPIO16:
+		addr = LP3943_REG_GPIO_B;
+		offset = offset - 8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read);
+	if (err)
+		return err;
+
+	return !!(read & BIT(offset));
+}
+
+static int lp3943_get_gpio_out_status(struct lp3943_gpio *lp3943_gpio,
+				      struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943 *lp3943 = lp3943_gpio->lp3943;
+	const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
+	u8 read;
+	int err;
+
+	err = lp3943_read_byte(lp3943, mux[offset].reg, &read);
+	if (err)
+		return err;
+
+	read = (read & mux[offset].mask) >> mux[offset].shift;
+
+	if (read == LP3943_GPIO_OUT_HIGH)
+		return 1;
+	else if (read == LP3943_GPIO_OUT_LOW)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static int lp3943_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+	/*
+	 * Limitation:
+	 *   LP3943 doesn't have the GPIO direction register. It provides
+	 *   only input and output status registers.
+	 *   So, direction info is required to handle the 'get' operation.
+	 *   This variable is updated whenever the direction is changed and
+	 *   it is used here.
+	 */
+
+	if (lp3943_gpio->input_mask & BIT(offset))
+		return lp3943_get_gpio_in_status(lp3943_gpio, chip, offset);
+	else
+		return lp3943_get_gpio_out_status(lp3943_gpio, chip, offset);
+}
+
+static void lp3943_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+	u8 data;
+
+	if (value)
+		data = LP3943_GPIO_OUT_HIGH;
+	else
+		data = LP3943_GPIO_OUT_LOW;
+
+	lp3943_gpio_set_mode(lp3943_gpio, offset, data);
+}
+
+static int lp3943_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+					int value)
+{
+	struct lp3943_gpio *lp3943_gpio = to_lp3943_gpio(chip);
+
+	lp3943_gpio_set(chip, offset, value);
+	lp3943_gpio->input_mask &= ~BIT(offset);
+
+	return 0;
+}
+
+static const struct gpio_chip lp3943_gpio_chip = {
+	.label			= "lp3943",
+	.owner			= THIS_MODULE,
+	.request		= lp3943_gpio_request,
+	.free			= lp3943_gpio_free,
+	.direction_input	= lp3943_gpio_direction_input,
+	.get			= lp3943_gpio_get,
+	.direction_output	= lp3943_gpio_direction_output,
+	.set			= lp3943_gpio_set,
+	.base			= -1,
+	.ngpio			= LP3943_MAX_GPIO,
+	.can_sleep		= 1,
+};
+
+static int lp3943_gpio_probe(struct platform_device *pdev)
+{
+	struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
+	struct lp3943_gpio *lp3943_gpio;
+
+	lp3943_gpio = devm_kzalloc(&pdev->dev, sizeof(*lp3943_gpio),
+				GFP_KERNEL);
+	if (!lp3943_gpio)
+		return -ENOMEM;
+
+	lp3943_gpio->lp3943 = lp3943;
+	lp3943_gpio->chip = lp3943_gpio_chip;
+	lp3943_gpio->chip.dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, lp3943_gpio);
+
+	return gpiochip_add(&lp3943_gpio->chip);
+}
+
+static int lp3943_gpio_remove(struct platform_device *pdev)
+{
+	struct lp3943_gpio *lp3943_gpio = platform_get_drvdata(pdev);
+
+	return gpiochip_remove(&lp3943_gpio->chip);
+}
+
+static const struct of_device_id lp3943_gpio_of_match[] = {
+	{ .compatible = "ti,lp3943-gpio", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp3943_gpio_of_match);
+
+static struct platform_driver lp3943_gpio_driver = {
+	.probe = lp3943_gpio_probe,
+	.remove = lp3943_gpio_remove,
+	.driver = {
+		.name = "lp3943-gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = lp3943_gpio_of_match,
+	},
+};
+module_platform_driver(lp3943_gpio_driver);
+
+MODULE_DESCRIPTION("LP3943 GPIO driver");
+MODULE_ALIAS("platform:lp3943-gpio");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");