Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

6 files changed, 1822 insertions, 0 deletions

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
new file mode 100644
index 00000000000..5b29c3b2a33
--- /dev/null
+++ b/drivers/firmware/Kconfig
@@ -0,0 +1,61 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+menu "Firmware Drivers"
+
+config EDD
+	tristate "BIOS Enhanced Disk Drive calls determine boot disk (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on !IA64
+	help
+	  Say Y or M here if you want to enable BIOS Enhanced Disk Drive
+	  Services real mode BIOS calls to determine which disk
+	  BIOS tries boot from.  This information is then exported via sysfs.
+
+	  This option is experimental and is known to fail to boot on some
+          obscure configurations. Most disk controller BIOS vendors do
+          not yet implement this feature.
+
+config EFI_VARS
+	tristate "EFI Variable Support via sysfs"
+	depends on EFI
+	default n
+	help
+	  If you say Y here, you are able to get EFI (Extensible Firmware
+	  Interface) variable information via sysfs.  You may read,
+	  write, create, and destroy EFI variables through this interface.
+
+	  Note that using this driver in concert with efibootmgr requires
+	  at least test release version 0.5.0-test3 or later, which is
+	  available from Matt Domsch's website located at:
+	  <http://linux.dell.com/efibootmgr/testing/efibootmgr-0.5.0-test3.tar.gz>
+
+	  Subsequent efibootmgr releases may be found at:
+	  <http://linux.dell.com/efibootmgr>
+
+config EFI_PCDP
+	bool "Console device selection via EFI PCDP or HCDP table"
+	depends on ACPI && EFI && IA64
+	default y if IA64
+	help
+	  If your firmware supplies the PCDP table, and you want to
+	  automatically use the primary console device it describes
+	  as the Linux console, say Y here.
+
+	  If your firmware supplies the HCDP table, and you want to
+	  use the first serial port it describes as the Linux console,
+	  say Y here.  If your EFI ConOut path contains only a UART
+	  device, it will become the console automatically.  Otherwise,
+	  you must specify the "console=hcdp" kernel boot argument.
+
+	  Neither the PCDP nor the HCDP affects naming of serial devices,
+	  so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending
+	  on how the driver discovers devices.
+
+	  You must also enable the appropriate drivers (serial, VGA, etc.)
+
+	  See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
+
+endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
new file mode 100644
index 00000000000..90fd0b26db8
--- /dev/null
+++ b/drivers/firmware/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux kernel.
+#
+obj-$(CONFIG_EDD)             	+= edd.o
+obj-$(CONFIG_EFI_VARS)		+= efivars.o
+obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
new file mode 100644
index 00000000000..33b669e6f97
--- /dev/null
+++ b/drivers/firmware/edd.c
@@ -0,0 +1,790 @@
+/*
+ * linux/arch/i386/kernel/edd.c
+ *  Copyright (C) 2002, 2003, 2004 Dell Inc.
+ *  by Matt Domsch <Matt_Domsch@dell.com>
+ *  disk signature by Matt Domsch, Andrew Wilks, and Sandeep K. Shandilya
+ *  legacy CHS by Patrick J. LoPresti <patl@users.sourceforge.net>
+ *
+ * BIOS Enhanced Disk Drive Services (EDD)
+ * conformant to T13 Committee www.t13.org
+ *   projects 1572D, 1484D, 1386D, 1226DT
+ *
+ * This code takes information provided by BIOS EDD calls
+ * fn41 - Check Extensions Present and
+ * fn48 - Get Device Parametes with EDD extensions
+ * made in setup.S, copied to safe structures in setup.c,
+ * and presents it in sysfs.
+ *
+ * Please see http://linux.dell.com/edd30/results.html for
+ * the list of BIOSs which have been reported to implement EDD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/limits.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/edd.h>
+
+#define EDD_VERSION "0.16"
+#define EDD_DATE    "2004-Jun-25"
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to BIOS EDD information");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EDD_VERSION);
+
+#define left (PAGE_SIZE - (p - buf) - 1)
+
+struct edd_device {
+	unsigned int index;
+	unsigned int mbr_signature;
+	struct edd_info *info;
+	struct kobject kobj;
+};
+
+struct edd_attribute {
+	struct attribute attr;
+	ssize_t(*show) (struct edd_device * edev, char *buf);
+	int (*test) (struct edd_device * edev);
+};
+
+/* forward declarations */
+static int edd_dev_is_type(struct edd_device *edev, const char *type);
+static struct pci_dev *edd_get_pci_dev(struct edd_device *edev);
+
+static struct edd_device *edd_devices[EDD_MBR_SIG_MAX];
+
+#define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
+struct edd_attribute edd_attr_##_name = { 	\
+	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE },	\
+	.show	= _show,				\
+	.test	= _test,				\
+};
+
+static int
+edd_has_mbr_signature(struct edd_device *edev)
+{
+	return edev->index < min_t(unsigned char, edd.mbr_signature_nr, EDD_MBR_SIG_MAX);
+}
+
+static int
+edd_has_edd_info(struct edd_device *edev)
+{
+	return edev->index < min_t(unsigned char, edd.edd_info_nr, EDDMAXNR);
+}
+
+static inline struct edd_info *
+edd_dev_get_info(struct edd_device *edev)
+{
+	return edev->info;
+}
+
+static inline void
+edd_dev_set_info(struct edd_device *edev, int i)
+{
+	edev->index = i;
+	if (edd_has_mbr_signature(edev))
+		edev->mbr_signature = edd.mbr_signature[i];
+	if (edd_has_edd_info(edev))
+		edev->info = &edd.edd_info[i];
+}
+
+#define to_edd_attr(_attr) container_of(_attr,struct edd_attribute,attr)
+#define to_edd_device(obj) container_of(obj,struct edd_device,kobj)
+
+static ssize_t
+edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
+{
+	struct edd_device *dev = to_edd_device(kobj);
+	struct edd_attribute *edd_attr = to_edd_attr(attr);
+	ssize_t ret = 0;
+
+	if (edd_attr->show)
+		ret = edd_attr->show(dev, buf);
+	return ret;
+}
+
+static struct sysfs_ops edd_attr_ops = {
+	.show = edd_attr_show,
+};
+
+static ssize_t
+edd_show_host_bus(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	int i;
+
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	for (i = 0; i < 4; i++) {
+		if (isprint(info->params.host_bus_type[i])) {
+			p += scnprintf(p, left, "%c", info->params.host_bus_type[i]);
+		} else {
+			p += scnprintf(p, left, " ");
+		}
+	}
+
+	if (!strncmp(info->params.host_bus_type, "ISA", 3)) {
+		p += scnprintf(p, left, "\tbase_address: %x\n",
+			     info->params.interface_path.isa.base_address);
+	} else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
+		   !strncmp(info->params.host_bus_type, "PCI", 3)) {
+		p += scnprintf(p, left,
+			     "\t%02x:%02x.%d  channel: %u\n",
+			     info->params.interface_path.pci.bus,
+			     info->params.interface_path.pci.slot,
+			     info->params.interface_path.pci.function,
+			     info->params.interface_path.pci.channel);
+	} else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
+		   !strncmp(info->params.host_bus_type, "XPRS", 4) ||
+		   !strncmp(info->params.host_bus_type, "HTPT", 4)) {
+		p += scnprintf(p, left,
+			     "\tTBD: %llx\n",
+			     info->params.interface_path.ibnd.reserved);
+
+	} else {
+		p += scnprintf(p, left, "\tunknown: %llx\n",
+			     info->params.interface_path.unknown.reserved);
+	}
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_interface(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	int i;
+
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	for (i = 0; i < 8; i++) {
+		if (isprint(info->params.interface_type[i])) {
+			p += scnprintf(p, left, "%c", info->params.interface_type[i]);
+		} else {
+			p += scnprintf(p, left, " ");
+		}
+	}
+	if (!strncmp(info->params.interface_type, "ATAPI", 5)) {
+		p += scnprintf(p, left, "\tdevice: %u  lun: %u\n",
+			     info->params.device_path.atapi.device,
+			     info->params.device_path.atapi.lun);
+	} else if (!strncmp(info->params.interface_type, "ATA", 3)) {
+		p += scnprintf(p, left, "\tdevice: %u\n",
+			     info->params.device_path.ata.device);
+	} else if (!strncmp(info->params.interface_type, "SCSI", 4)) {
+		p += scnprintf(p, left, "\tid: %u  lun: %llu\n",
+			     info->params.device_path.scsi.id,
+			     info->params.device_path.scsi.lun);
+	} else if (!strncmp(info->params.interface_type, "USB", 3)) {
+		p += scnprintf(p, left, "\tserial_number: %llx\n",
+			     info->params.device_path.usb.serial_number);
+	} else if (!strncmp(info->params.interface_type, "1394", 4)) {
+		p += scnprintf(p, left, "\teui: %llx\n",
+			     info->params.device_path.i1394.eui);
+	} else if (!strncmp(info->params.interface_type, "FIBRE", 5)) {
+		p += scnprintf(p, left, "\twwid: %llx lun: %llx\n",
+			     info->params.device_path.fibre.wwid,
+			     info->params.device_path.fibre.lun);
+	} else if (!strncmp(info->params.interface_type, "I2O", 3)) {
+		p += scnprintf(p, left, "\tidentity_tag: %llx\n",
+			     info->params.device_path.i2o.identity_tag);
+	} else if (!strncmp(info->params.interface_type, "RAID", 4)) {
+		p += scnprintf(p, left, "\tidentity_tag: %x\n",
+			     info->params.device_path.raid.array_number);
+	} else if (!strncmp(info->params.interface_type, "SATA", 4)) {
+		p += scnprintf(p, left, "\tdevice: %u\n",
+			     info->params.device_path.sata.device);
+	} else {
+		p += scnprintf(p, left, "\tunknown: %llx %llx\n",
+			     info->params.device_path.unknown.reserved1,
+			     info->params.device_path.unknown.reserved2);
+	}
+
+	return (p - buf);
+}
+
+/**
+ * edd_show_raw_data() - copies raw data to buffer for userspace to parse
+ *
+ * Returns: number of bytes written, or -EINVAL on failure
+ */
+static ssize_t
+edd_show_raw_data(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	ssize_t len = sizeof (info->params);
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE))
+		len = info->params.length;
+
+	/* In case of buggy BIOSs */
+	if (len > (sizeof(info->params)))
+		len = sizeof(info->params);
+
+	memcpy(buf, &info->params, len);
+	return len;
+}
+
+static ssize_t
+edd_show_version(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "0x%02x\n", info->version);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_mbr_signature(struct edd_device *edev, char *buf)
+{
+	char *p = buf;
+	p += scnprintf(p, left, "0x%08x\n", edev->mbr_signature);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_extensions(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (info->interface_support & EDD_EXT_FIXED_DISK_ACCESS) {
+		p += scnprintf(p, left, "Fixed disk access\n");
+	}
+	if (info->interface_support & EDD_EXT_DEVICE_LOCKING_AND_EJECTING) {
+		p += scnprintf(p, left, "Device locking and ejecting\n");
+	}
+	if (info->interface_support & EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT) {
+		p += scnprintf(p, left, "Enhanced Disk Drive support\n");
+	}
+	if (info->interface_support & EDD_EXT_64BIT_EXTENSIONS) {
+		p += scnprintf(p, left, "64-bit extensions\n");
+	}
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_info_flags(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (info->params.info_flags & EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT)
+		p += scnprintf(p, left, "DMA boundary error transparent\n");
+	if (info->params.info_flags & EDD_INFO_GEOMETRY_VALID)
+		p += scnprintf(p, left, "geometry valid\n");
+	if (info->params.info_flags & EDD_INFO_REMOVABLE)
+		p += scnprintf(p, left, "removable\n");
+	if (info->params.info_flags & EDD_INFO_WRITE_VERIFY)
+		p += scnprintf(p, left, "write verify\n");
+	if (info->params.info_flags & EDD_INFO_MEDIA_CHANGE_NOTIFICATION)
+		p += scnprintf(p, left, "media change notification\n");
+	if (info->params.info_flags & EDD_INFO_LOCKABLE)
+		p += scnprintf(p, left, "lockable\n");
+	if (info->params.info_flags & EDD_INFO_NO_MEDIA_PRESENT)
+		p += scnprintf(p, left, "no media present\n");
+	if (info->params.info_flags & EDD_INFO_USE_INT13_FN50)
+		p += scnprintf(p, left, "use int13 fn50\n");
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_max_cylinder(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += snprintf(p, left, "%u\n", info->legacy_max_cylinder);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_max_head(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += snprintf(p, left, "%u\n", info->legacy_max_head);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_sectors_per_track(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += snprintf(p, left, "%u\n", info->legacy_sectors_per_track);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_cylinders(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.num_default_cylinders);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_heads(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.num_default_heads);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_sectors_per_track(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.sectors_per_track);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_sectors(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%llu\n", info->params.number_of_sectors);
+	return (p - buf);
+}
+
+
+/*
+ * Some device instances may not have all the above attributes,
+ * or the attribute values may be meaningless (i.e. if
+ * the device is < EDD 3.0, it won't have host_bus and interface
+ * information), so don't bother making files for them.  Likewise
+ * if the default_{cylinders,heads,sectors_per_track} values
+ * are zero, the BIOS doesn't provide sane values, don't bother
+ * creating files for them either.
+ */
+
+static int
+edd_has_legacy_max_cylinder(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_max_cylinder > 0;
+}
+
+static int
+edd_has_legacy_max_head(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_max_head > 0;
+}
+
+static int
+edd_has_legacy_sectors_per_track(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_sectors_per_track > 0;
+}
+
+static int
+edd_has_default_cylinders(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.num_default_cylinders > 0;
+}
+
+static int
+edd_has_default_heads(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.num_default_heads > 0;
+}
+
+static int
+edd_has_default_sectors_per_track(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.sectors_per_track > 0;
+}
+
+static int
+edd_has_edd30(struct edd_device *edev)
+{
+	struct edd_info *info;
+	int i, nonzero_path = 0;
+	char c;
+
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+
+	if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE)) {
+		return 0;
+	}
+
+	for (i = 30; i <= 73; i++) {
+		c = *(((uint8_t *) info) + i + 4);
+		if (c) {
+			nonzero_path++;
+			break;
+		}
+	}
+	if (!nonzero_path) {
+		return 0;
+	}
+
+	return 1;
+}
+
+
+static EDD_DEVICE_ATTR(raw_data, 0444, edd_show_raw_data, edd_has_edd_info);
+static EDD_DEVICE_ATTR(version, 0444, edd_show_version, edd_has_edd_info);
+static EDD_DEVICE_ATTR(extensions, 0444, edd_show_extensions, edd_has_edd_info);
+static EDD_DEVICE_ATTR(info_flags, 0444, edd_show_info_flags, edd_has_edd_info);
+static EDD_DEVICE_ATTR(sectors, 0444, edd_show_sectors, edd_has_edd_info);
+static EDD_DEVICE_ATTR(legacy_max_cylinder, 0444,
+                       edd_show_legacy_max_cylinder,
+		       edd_has_legacy_max_cylinder);
+static EDD_DEVICE_ATTR(legacy_max_head, 0444, edd_show_legacy_max_head,
+		       edd_has_legacy_max_head);
+static EDD_DEVICE_ATTR(legacy_sectors_per_track, 0444,
+                       edd_show_legacy_sectors_per_track,
+		       edd_has_legacy_sectors_per_track);
+static EDD_DEVICE_ATTR(default_cylinders, 0444, edd_show_default_cylinders,
+		       edd_has_default_cylinders);
+static EDD_DEVICE_ATTR(default_heads, 0444, edd_show_default_heads,
+		       edd_has_default_heads);
+static EDD_DEVICE_ATTR(default_sectors_per_track, 0444,
+		       edd_show_default_sectors_per_track,
+		       edd_has_default_sectors_per_track);
+static EDD_DEVICE_ATTR(interface, 0444, edd_show_interface, edd_has_edd30);
+static EDD_DEVICE_ATTR(host_bus, 0444, edd_show_host_bus, edd_has_edd30);
+static EDD_DEVICE_ATTR(mbr_signature, 0444, edd_show_mbr_signature, edd_has_mbr_signature);
+
+
+/* These are default attributes that are added for every edd
+ * device discovered.  There are none.
+ */
+static struct attribute * def_attrs[] = {
+	NULL,
+};
+
+/* These attributes are conditional and only added for some devices. */
+static struct edd_attribute * edd_attrs[] = {
+	&edd_attr_raw_data,
+	&edd_attr_version,
+	&edd_attr_extensions,
+	&edd_attr_info_flags,
+	&edd_attr_sectors,
+	&edd_attr_legacy_max_cylinder,
+	&edd_attr_legacy_max_head,
+	&edd_attr_legacy_sectors_per_track,
+	&edd_attr_default_cylinders,
+	&edd_attr_default_heads,
+	&edd_attr_default_sectors_per_track,
+	&edd_attr_interface,
+	&edd_attr_host_bus,
+	&edd_attr_mbr_signature,
+	NULL,
+};
+
+/**
+ *	edd_release - free edd structure
+ *	@kobj:	kobject of edd structure
+ *
+ *	This is called when the refcount of the edd structure
+ *	reaches 0. This should happen right after we unregister,
+ *	but just in case, we use the release callback anyway.
+ */
+
+static void edd_release(struct kobject * kobj)
+{
+	struct edd_device * dev = to_edd_device(kobj);
+	kfree(dev);
+}
+
+static struct kobj_type ktype_edd = {
+	.release	= edd_release,
+	.sysfs_ops	= &edd_attr_ops,
+	.default_attrs	= def_attrs,
+};
+
+static decl_subsys(edd,&ktype_edd,NULL);
+
+
+/**
+ * edd_dev_is_type() - is this EDD device a 'type' device?
+ * @edev
+ * @type - a host bus or interface identifier string per the EDD spec
+ *
+ * Returns 1 (TRUE) if it is a 'type' device, 0 otherwise.
+ */
+static int
+edd_dev_is_type(struct edd_device *edev, const char *type)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+
+	if (type && info) {
+		if (!strncmp(info->params.host_bus_type, type, strlen(type)) ||
+		    !strncmp(info->params.interface_type, type, strlen(type)))
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * edd_get_pci_dev() - finds pci_dev that matches edev
+ * @edev - edd_device
+ *
+ * Returns pci_dev if found, or NULL
+ */
+static struct pci_dev *
+edd_get_pci_dev(struct edd_device *edev)
+{
+	struct edd_info *info = edd_dev_get_info(edev);
+
+	if (edd_dev_is_type(edev, "PCI")) {
+		return pci_find_slot(info->params.interface_path.pci.bus,
+				     PCI_DEVFN(info->params.interface_path.pci.slot,
+					       info->params.interface_path.pci.
+					       function));
+	}
+	return NULL;
+}
+
+static int
+edd_create_symlink_to_pcidev(struct edd_device *edev)
+{
+
+	struct pci_dev *pci_dev = edd_get_pci_dev(edev);
+	if (!pci_dev)
+		return 1;
+	return sysfs_create_link(&edev->kobj,&pci_dev->dev.kobj,"pci_dev");
+}
+
+static inline void
+edd_device_unregister(struct edd_device *edev)
+{
+	kobject_unregister(&edev->kobj);
+}
+
+static void edd_populate_dir(struct edd_device * edev)
+{
+	struct edd_attribute * attr;
+	int error = 0;
+	int i;
+
+	for (i = 0; (attr = edd_attrs[i]) && !error; i++) {
+		if (!attr->test ||
+		    (attr->test && attr->test(edev)))
+			error = sysfs_create_file(&edev->kobj,&attr->attr);
+	}
+
+	if (!error) {
+		edd_create_symlink_to_pcidev(edev);
+	}
+}
+
+static int
+edd_device_register(struct edd_device *edev, int i)
+{
+	int error;
+
+	if (!edev)
+		return 1;
+	memset(edev, 0, sizeof (*edev));
+	edd_dev_set_info(edev, i);
+	kobject_set_name(&edev->kobj, "int13_dev%02x",
+			 0x80 + i);
+	kobj_set_kset_s(edev,edd_subsys);
+	error = kobject_register(&edev->kobj);
+	if (!error)
+		edd_populate_dir(edev);
+	return error;
+}
+
+static inline int edd_num_devices(void)
+{
+	return max_t(unsigned char,
+		     min_t(unsigned char, EDD_MBR_SIG_MAX, edd.mbr_signature_nr),
+		     min_t(unsigned char, EDDMAXNR, edd.edd_info_nr));
+}
+
+/**
+ * edd_init() - creates sysfs tree of EDD data
+ */
+static int __init
+edd_init(void)
+{
+	unsigned int i;
+	int rc=0;
+	struct edd_device *edev;
+
+	printk(KERN_INFO "BIOS EDD facility v%s %s, %d devices found\n",
+	       EDD_VERSION, EDD_DATE, edd_num_devices());
+
+	if (!edd_num_devices()) {
+		printk(KERN_INFO "EDD information not available.\n");
+		return 1;
+	}
+
+	rc = firmware_register(&edd_subsys);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < edd_num_devices() && !rc; i++) {
+		edev = kmalloc(sizeof (*edev), GFP_KERNEL);
+		if (!edev)
+			return -ENOMEM;
+
+		rc = edd_device_register(edev, i);
+		if (rc) {
+			kfree(edev);
+			break;
+		}
+		edd_devices[i] = edev;
+	}
+
+	if (rc)
+		firmware_unregister(&edd_subsys);
+	return rc;
+}
+
+static void __exit
+edd_exit(void)
+{
+	int i;
+	struct edd_device *edev;
+
+	for (i = 0; i < edd_num_devices(); i++) {
+		if ((edev = edd_devices[i]))
+			edd_device_unregister(edev);
+	}
+	firmware_unregister(&edd_subsys);
+}
+
+late_initcall(edd_init);
+module_exit(edd_exit);
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
new file mode 100644
index 00000000000..0287ff65963
--- /dev/null
+++ b/drivers/firmware/efivars.c
@@ -0,0 +1,781 @@
+/*
+ * EFI Variables - efivars.c
+ *
+ * Copyright (C) 2001,2003,2004 Dell <Matt_Domsch@dell.com>
+ * Copyright (C) 2004 Intel Corporation <matthew.e.tolentino@intel.com>
+ *
+ * This code takes all variables accessible from EFI runtime and
+ *  exports them via sysfs
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Changelog:
+ *
+ *  17 May 2004 - Matt Domsch <Matt_Domsch@dell.com>
+ *   remove check for efi_enabled in exit
+ *   add MODULE_VERSION
+ *
+ *  26 Apr 2004 - Matt Domsch <Matt_Domsch@dell.com>
+ *   minor bug fixes
+ *
+ *  21 Apr 2004 - Matt Tolentino <matthew.e.tolentino@intel.com)
+ *   converted driver to export variable information via sysfs
+ *   and moved to drivers/firmware directory
+ *   bumped revision number to v0.07 to reflect conversion & move
+ *
+ *  10 Dec 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ *   fix locking per Peter Chubb's findings
+ *
+ *  25 Mar 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ *   move uuid_unparse() to include/asm-ia64/efi.h:efi_guid_unparse()
+ *
+ *  12 Feb 2002 - Matt Domsch <Matt_Domsch@dell.com>
+ *   use list_for_each_safe when deleting vars.
+ *   remove ifdef CONFIG_SMP around include <linux/smp.h>
+ *   v0.04 release to linux-ia64@linuxia64.org
+ *
+ *  20 April 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ *   Moved vars from /proc/efi to /proc/efi/vars, and made
+ *   efi.c own the /proc/efi directory.
+ *   v0.03 release to linux-ia64@linuxia64.org
+ *
+ *  26 March 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ *   At the request of Stephane, moved ownership of /proc/efi
+ *   to efi.c, and now efivars lives under /proc/efi/vars.
+ *
+ *  12 March 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ *   Feedback received from Stephane Eranian incorporated.
+ *   efivar_write() checks copy_from_user() return value.
+ *   efivar_read/write() returns proper errno.
+ *   v0.02 release to linux-ia64@linuxia64.org
+ *
+ *  26 February 2001 - Matt Domsch <Matt_Domsch@dell.com>
+ *   v0.01 release to linux-ia64@linuxia64.org
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/sched.h>		/* for capable() */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/efi.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+
+#include <asm/uaccess.h>
+
+#define EFIVARS_VERSION "0.08"
+#define EFIVARS_DATE "2004-May-17"
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to EFI Variables");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EFIVARS_VERSION);
+
+/*
+ * efivars_lock protects two things:
+ * 1) efivar_list - adds, removals, reads, writes
+ * 2) efi.[gs]et_variable() calls.
+ * It must not be held when creating sysfs entries or calling kmalloc.
+ * efi.get_next_variable() is only called from efivars_init(),
+ * which is protected by the BKL, so that path is safe.
+ */
+static DEFINE_SPINLOCK(efivars_lock);
+static LIST_HEAD(efivar_list);
+
+/*
+ * The maximum size of VariableName + Data = 1024
+ * Therefore, it's reasonable to save that much
+ * space in each part of the structure,
+ * and we use a page for reading/writing.
+ */
+
+struct efi_variable {
+	efi_char16_t  VariableName[1024/sizeof(efi_char16_t)];
+	efi_guid_t    VendorGuid;
+	unsigned long DataSize;
+	__u8          Data[1024];
+	efi_status_t  Status;
+	__u32         Attributes;
+} __attribute__((packed));
+
+
+struct efivar_entry {
+	struct efi_variable var;
+	struct list_head list;
+	struct kobject kobj;
+};
+
+#define get_efivar_entry(n) list_entry(n, struct efivar_entry, list)
+
+struct efivar_attribute {
+	struct attribute attr;
+	ssize_t (*show) (struct efivar_entry *entry, char *buf);
+	ssize_t (*store)(struct efivar_entry *entry, const char *buf, size_t count);
+};
+
+
+#define EFI_ATTR(_name, _mode, _show, _store) \
+struct subsys_attribute efi_attr_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+	.show = _show, \
+	.store = _store, \
+};
+
+#define EFIVAR_ATTR(_name, _mode, _show, _store) \
+struct efivar_attribute efivar_attr_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+	.show = _show, \
+	.store = _store, \
+};
+
+#define VAR_SUBSYS_ATTR(_name, _mode, _show, _store) \
+struct subsys_attribute var_subsys_attr_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+	.show = _show, \
+	.store = _store, \
+};
+
+#define to_efivar_attr(_attr) container_of(_attr, struct efivar_attribute, attr)
+#define to_efivar_entry(obj)  container_of(obj, struct efivar_entry, kobj)
+
+/*
+ * Prototype for sysfs creation function
+ */
+static int
+efivar_create_sysfs_entry(unsigned long variable_name_size,
+				efi_char16_t *variable_name,
+				efi_guid_t *vendor_guid);
+
+/* Return the number of unicode characters in data */
+static unsigned long
+utf8_strlen(efi_char16_t *data, unsigned long maxlength)
+{
+	unsigned long length = 0;
+
+	while (*data++ != 0 && length < maxlength)
+		length++;
+	return length;
+}
+
+/*
+ * Return the number of bytes is the length of this string
+ * Note: this is NOT the same as the number of unicode characters
+ */
+static inline unsigned long
+utf8_strsize(efi_char16_t *data, unsigned long maxlength)
+{
+	return utf8_strlen(data, maxlength/sizeof(efi_char16_t)) * sizeof(efi_char16_t);
+}
+
+static efi_status_t
+get_var_data(struct efi_variable *var)
+{
+	efi_status_t status;
+
+	spin_lock(&efivars_lock);
+	var->DataSize = 1024;
+	status = efi.get_variable(var->VariableName,
+				&var->VendorGuid,
+				&var->Attributes,
+				&var->DataSize,
+				var->Data);
+	spin_unlock(&efivars_lock);
+	if (status != EFI_SUCCESS) {
+		printk(KERN_WARNING "efivars: get_variable() failed 0x%lx!\n",
+			status);
+	}
+	return status;
+}
+
+static ssize_t
+efivar_guid_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	char *str = buf;
+
+	if (!entry || !buf)
+		return 0;
+
+	efi_guid_unparse(&var->VendorGuid, str);
+	str += strlen(str);
+	str += sprintf(str, "\n");
+
+	return str - buf;
+}
+
+static ssize_t
+efivar_attr_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	char *str = buf;
+	efi_status_t status;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	status = get_var_data(var);
+	if (status != EFI_SUCCESS)
+		return -EIO;