Merge branch 'pm-cpufreq'

* pm-cpufreq: (57 commits)
  cpufreq: MAINTAINERS: Add co-maintainer
  cpufreq: pxa2xx: initialize variables
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  cpufreq: cpu0: Put cpu parent node after using it
  cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
  cpufreq: ARM big LITTLE: put DT nodes after using them
  cpufreq: Don't call __cpufreq_governor() for drivers without target()
  cpufreq: exynos5440: Protect OPP search calls with RCU lock
  cpufreq: dbx500: Round to closest available freq
  cpufreq: Call __cpufreq_governor() with correct policy->cpus mask
  cpufreq / intel_pstate: Optimize intel_pstate_set_policy
  cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
  arm: exynos: Enable OPP library support for exynos5440
  cpufreq: exynos: Remove error return even if no soc is found
  cpufreq: exynos: Add cpufreq driver for exynos5440
  cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor
  cpufreq: ondemand: allow custom powersave_bias_target handler to be registered
  cpufreq: convert cpufreq_driver to using RCU
  cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq
  cpufreq: sparc: move cpufreq driver to drivers/cpufreq
  ...

Conflicts:
	MAINTAINERS (with commit a8e39c3 from pm-cpuidle)
	drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)

63 files changed, 7366 insertions, 756 deletions

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index cbcb21e3277..a1488f58f6c 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -205,10 +205,99 @@ depends on ARM
 source "drivers/cpufreq/Kconfig.arm"
 endmenu
 
+menu "AVR32 CPU frequency scaling drivers"
+depends on AVR32
+
+config AVR32_AT32AP_CPUFREQ
+	bool "CPU frequency driver for AT32AP"
+	depends on PLATFORM_AT32AP
+	default n
+	help
+	  This enables the CPU frequency driver for AT32AP processors.
+	  If in doubt, say N.
+
+endmenu
+
+menu "CPUFreq processor drivers"
+depends on IA64
+
+config IA64_ACPI_CPUFREQ
+	tristate "ACPI Processor P-States driver"
+	select CPU_FREQ_TABLE
+	depends on ACPI_PROCESSOR
+	help
+	This driver adds a CPUFreq driver which utilizes the ACPI
+	Processor Performance States.
+
+	For details, take a look at <file:Documentation/cpu-freq/>.
+
+	If in doubt, say N.
+
+endmenu
+
+menu "MIPS CPUFreq processor drivers"
+depends on MIPS
+
+config LOONGSON2_CPUFREQ
+	tristate "Loongson2 CPUFreq Driver"
+	select CPU_FREQ_TABLE
+	help
+	  This option adds a CPUFreq driver for loongson processors which
+	  support software configurable cpu frequency.
+
+	  Loongson2F and it's successors support this feature.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+endmenu
+
 menu "PowerPC CPU frequency scaling drivers"
 depends on PPC32 || PPC64
 source "drivers/cpufreq/Kconfig.powerpc"
 endmenu
 
+menu "SPARC CPU frequency scaling drivers"
+depends on SPARC64
+config SPARC_US3_CPUFREQ
+	tristate "UltraSPARC-III CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for UltraSPARC-III processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config SPARC_US2E_CPUFREQ
+	tristate "UltraSPARC-IIe CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+endmenu
+
+menu "SH CPU Frequency scaling"
+depends on SUPERH
+config SH_CPU_FREQ
+	tristate "SuperH CPU Frequency driver"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the cpufreq driver for SuperH. Any CPU that supports
+	  clock rate rounding through the clock framework can use this
+	  driver. While it will make the kernel slightly larger, this is
+	  harmless for CPUs that don't support rate rounding. The driver
+	  will also generate a notice in the boot log before disabling
+	  itself if the CPU in question is not capable of rate rounding.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If unsure, say N.
+endmenu
+
 endif
 endmenu
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 030ddf6dd3f..f3af18b9acc 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,93 @@
 # ARM CPU Frequency scaling drivers
 #
 
+config ARM_BIG_LITTLE_CPUFREQ
+	tristate
+	depends on ARM_CPU_TOPOLOGY
+
+config ARM_DT_BL_CPUFREQ
+	tristate "Generic ARM big LITTLE CPUfreq driver probed via DT"
+	select ARM_BIG_LITTLE_CPUFREQ
+	depends on OF && HAVE_CLK
+	help
+	  This enables the Generic CPUfreq driver for ARM big.LITTLE platform.
+	  This gets frequency tables from DT.
+
+config ARM_EXYNOS_CPUFREQ
+	bool "SAMSUNG EXYNOS SoCs"
+	depends on ARCH_EXYNOS
+	default y
+	help
+	  This adds the CPUFreq driver common part for Samsung
+	  EXYNOS SoCs.
+
+	  If in doubt, say N.
+
+config ARM_EXYNOS4210_CPUFREQ
+	def_bool CPU_EXYNOS4210
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4210
+	  SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4X12
+	  SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+	def_bool SOC_EXYNOS5250
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5250
+	  SoC.
+
+config ARM_EXYNOS5440_CPUFREQ
+	def_bool SOC_EXYNOS5440
+	depends on HAVE_CLK && PM_OPP && OF
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5440
+	  SoC. The nature of exynos5440 clock controller is
+	  different than previous exynos controllers so not using
+	  the common exynos framework.
+
+config ARM_HIGHBANK_CPUFREQ
+	tristate "Calxeda Highbank-based"
+	depends on ARCH_HIGHBANK
+	select CPU_FREQ_TABLE
+	select GENERIC_CPUFREQ_CPU0
+	select PM_OPP
+	select REGULATOR
+
+	default m
+	help
+	  This adds the CPUFreq driver for Calxeda Highbank SoC
+	  based boards.
+
+	  If in doubt, say N.
+
+config ARM_IMX6Q_CPUFREQ
+	tristate "Freescale i.MX6Q cpufreq support"
+	depends on SOC_IMX6Q
+	depends on REGULATOR_ANATOP
+	help
+	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
+
+	  If in doubt, say N.
+
+config ARM_INTEGRATOR
+	tristate "CPUfreq driver for ARM Integrator CPUs"
+	depends on ARCH_INTEGRATOR
+	default y
+	help
+	  This enables the CPUfreq driver for ARM Integrator CPUs.
+	  If in doubt, say Y.
+
+config ARM_KIRKWOOD_CPUFREQ
+	def_bool ARCH_KIRKWOOD && OF
+	help
+	  This adds the CPUFreq driver for Marvell Kirkwood
+	  SoCs.
+
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
 	depends on ARCH_OMAP2PLUS
@@ -42,6 +129,7 @@ config ARM_S3C64XX_CPUFREQ
 config ARM_S5PV210_CPUFREQ
 	bool "Samsung S5PV210 and S5PC110"
 	depends on CPU_S5PV210
+	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the CPUFreq driver for Samsung S5PV210 and
@@ -49,48 +137,11 @@ config ARM_S5PV210_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_EXYNOS_CPUFREQ
-	bool "SAMSUNG EXYNOS SoCs"
-	depends on ARCH_EXYNOS
-	default y
-	help
-	  This adds the CPUFreq driver common part for Samsung
-	  EXYNOS SoCs.
-
-	  If in doubt, say N.
+config ARM_SA1100_CPUFREQ
+	bool
 
-config ARM_EXYNOS4210_CPUFREQ
-	def_bool CPU_EXYNOS4210
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS4210
-	  SoC (S5PV310 or S5PC210).
-
-config ARM_EXYNOS4X12_CPUFREQ
-	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS4X12
-	  SoC (EXYNOS4212 or EXYNOS4412).
-
-config ARM_EXYNOS5250_CPUFREQ
-	def_bool SOC_EXYNOS5250
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS5250
-	  SoC.
-
-config ARM_KIRKWOOD_CPUFREQ
-	def_bool ARCH_KIRKWOOD && OF
-	help
-	  This adds the CPUFreq driver for Marvell Kirkwood
-	  SoCs.
-
-config ARM_IMX6Q_CPUFREQ
-	tristate "Freescale i.MX6Q cpufreq support"
-	depends on SOC_IMX6Q
-	depends on REGULATOR_ANATOP
-	help
-	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
-
-	  If in doubt, say N.
+config ARM_SA1110_CPUFREQ
+	bool
 
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
@@ -98,18 +149,3 @@ config ARM_SPEAR_CPUFREQ
 	default y
 	help
 	  This adds the CPUFreq driver support for SPEAr SOCs.
-
-config ARM_HIGHBANK_CPUFREQ
-	tristate "Calxeda Highbank-based"
-	depends on ARCH_HIGHBANK
-	select CPU_FREQ_TABLE
-	select GENERIC_CPUFREQ_CPU0
-	select PM_OPP
-	select REGULATOR
-
-	default m
-	help
-	  This adds the CPUFreq driver for Calxeda Highbank SoC
-	  based boards.
-
-	  If in doubt, say N.
diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc
index e76992f7968..9c926ca0d71 100644
--- a/drivers/cpufreq/Kconfig.powerpc
+++ b/drivers/cpufreq/Kconfig.powerpc
@@ -1,3 +1,21 @@
+config CPU_FREQ_CBE
+	tristate "CBE frequency scaling"
+	depends on CBE_RAS && PPC_CELL
+	default m
+	help
+	  This adds the cpufreq driver for Cell BE processors.
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+	  If you don't have such processor, say N
+
+config CPU_FREQ_CBE_PMI
+	bool "CBE frequency scaling using PMI interface"
+	depends on CPU_FREQ_CBE
+	default n
+	help
+	  Select this, if you want to use the PMI interface to switch
+	  frequencies. Using PMI, the processor will not only be able to run at
+	  lower speed, but also at lower core voltage.
+
 config CPU_FREQ_MAPLE
 	bool "Support for Maple 970FX Evaluation Board"
 	depends on PPC_MAPLE
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index d7dc0ed6adb..2b8a8c37454 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -129,6 +129,23 @@ config X86_POWERNOW_K8
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
+config X86_AMD_FREQ_SENSITIVITY
+	tristate "AMD frequency sensitivity feedback powersave bias"
+	depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD
+	help
+	  This adds AMD-specific powersave bias function to the ondemand
+	  governor, which allows it to make more power-conscious frequency
+	  change decisions based on feedback from hardware (availble on AMD
+	  Family 16h and above).
+
+	  Hardware feedback tells software how "sensitive" to frequency changes
+	  the CPUs' workloads are. CPU-bound workloads will be more sensitive
+	  -- they will perform better as frequency increases. Memory/IO-bound
+	  workloads will be less sensitive -- they will not necessarily perform
+	  better as frequency increases.
+
+	  If in doubt, say N.
+
 config X86_GX_SUSPMOD
 	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
 	depends on X86_32 && PCI
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 863fd1865d4..315b9231feb 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -41,23 +41,54 @@ obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
 obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
 obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
 obj-$(CONFIG_X86_INTEL_PSTATE)		+= intel_pstate.o
+obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY)	+= amd_freq_sensitivity.o
 
 ##################################################################################
 # ARM SoC drivers
+obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
+# big LITTLE per platform glues. Keep DT_BL_CPUFREQ as the last entry in all big
+# LITTLE drivers, so that it is probed last.
+obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
+
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
-obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
-obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
-obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
+obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
+obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
+obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
+obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
+obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
+obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
-obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
-obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
+obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
+obj-$(CONFIG_CPU_FREQ_CBE)		+= ppc-cbe-cpufreq.o
+ppc-cbe-cpufreq-y			+= ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
+obj-$(CONFIG_CPU_FREQ_CBE_PMI)		+= ppc_cbe_cpufreq_pmi.o
 obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
+
+##################################################################################
+# Other platform drivers
+obj-$(CONFIG_AVR32_AT32AP_CPUFREQ)	+= at32ap-cpufreq.o
+obj-$(CONFIG_BLACKFIN)			+= blackfin-cpufreq.o
+obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
+obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
+obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
+obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
+obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
+obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
+obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o
+obj-$(CONFIG_UNICORE32)			+= unicore2-cpufreq.o
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 57a8774f0b4..11b8b4b54ce 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -423,7 +423,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	struct drv_cmd cmd;
 	unsigned int next_state = 0; /* Index into freq_table */
 	unsigned int next_perf_state = 0; /* Index into perf table */
-	unsigned int i;
 	int result = 0;
 
 	pr_debug("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
@@ -486,10 +485,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	}
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	drv_write(&cmd);
 
@@ -502,10 +498,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	for_each_cpu(i, policy->cpus) {
-		freqs.cpu = i;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	perf->state = next_perf_state;
 
 out:
diff --git a/drivers/cpufreq/amd_freq_sensitivity.c b/drivers/cpufreq/amd_freq_sensitivity.c
new file mode 100644
index 00000000000..f6b79ab0070
--- /dev/null
+++ b/drivers/cpufreq/amd_freq_sensitivity.c
@@ -0,0 +1,148 @@
+/*
+ * amd_freq_sensitivity.c: AMD frequency sensitivity feedback powersave bias
+ *                         for the ondemand governor.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ *
+ * Author: Jacob Shin <jacob.shin@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/percpu-defs.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/msr.h>
+#include <asm/cpufeature.h>
+
+#include "cpufreq_governor.h"
+
+#define MSR_AMD64_FREQ_SENSITIVITY_ACTUAL	0xc0010080
+#define MSR_AMD64_FREQ_SENSITIVITY_REFERENCE	0xc0010081
+#define CLASS_CODE_SHIFT			56
+#define POWERSAVE_BIAS_MAX			1000
+#define POWERSAVE_BIAS_DEF			400
+
+struct cpu_data_t {
+	u64 actual;
+	u64 reference;
+	unsigned int freq_prev;
+};
+
+static DEFINE_PER_CPU(struct cpu_data_t, cpu_data);
+
+static unsigned int amd_powersave_bias_target(struct cpufreq_policy *policy,
+					      unsigned int freq_next,
+					      unsigned int relation)
+{
+	int sensitivity;
+	long d_actual, d_reference;
+	struct msr actual, reference;
+	struct cpu_data_t *data = &per_cpu(cpu_data, policy->cpu);
+	struct dbs_data *od_data = policy->governor_data;
+	struct od_dbs_tuners *od_tuners = od_data->tuners;
+	struct od_cpu_dbs_info_s *od_info =
+		od_data->cdata->get_cpu_dbs_info_s(policy->cpu);
+
+	if (!od_info->freq_table)
+		return freq_next;
+
+	rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_ACTUAL,
+		&actual.l, &actual.h);
+	rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_REFERENCE,
+		&reference.l, &reference.h);
+	actual.h &= 0x00ffffff;
+	reference.h &= 0x00ffffff;
+
+	/* counter wrapped around, so stay on current frequency */
+	if (actual.q < data->actual || reference.q < data->reference) {
+		freq_next = policy->cur;
+		goto out;
+	}
+
+	d_actual = actual.q - data->actual;
+	d_reference = reference.q - data->reference;
+
+	/* divide by 0, so stay on current frequency as well */
+	if (d_reference == 0) {
+		freq_next = policy->cur;
+		goto out;
+	}
+
+	sensitivity = POWERSAVE_BIAS_MAX -
+		(POWERSAVE_BIAS_MAX * (d_reference - d_actual) / d_reference);
+
+	clamp(sensitivity, 0, POWERSAVE_BIAS_MAX);
+
+	/* this workload is not CPU bound, so choose a lower freq */
+	if (sensitivity < od_tuners->powersave_bias) {
+		if (data->freq_prev == policy->cur)
+			freq_next = policy->cur;
+
+		if (freq_next > policy->cur)
+			freq_next = policy->cur;
+		else if (freq_next < policy->cur)
+			freq_next = policy->min;
+		else {
+			unsigned int index;
+
+			cpufreq_frequency_table_target(policy,
+				od_info->freq_table, policy->cur - 1,
+				CPUFREQ_RELATION_H, &index);
+			freq_next = od_info->freq_table[index].frequency;
+		}
+
+		data->freq_prev = freq_next;
+	} else
+		data->freq_prev = 0;
+
+out:
+	data->actual = actual.q;
+	data->reference = ref