Merge branch 'pm-cpufreq'

* pm-cpufreq: (41 commits)
  cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: e_powersaver: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: ACPI: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: s3c2416: fix forgotten driver_data conversions
  cpufreq: make __cpufreq_notify_transition() static
  cpufreq: Fix minor formatting issues
  cpufreq: Fix governor start/stop race condition
  cpufreq: Simplify userspace governor
  cpufreq: X86_AMD_FREQ_SENSITIVITY: select CPU_FREQ_TABLE
  cpufreq: tegra: create CONFIG_ARM_TEGRA_CPUFREQ
  cpufreq: S3C2416/S3C64XX: select CPU_FREQ_TABLE
  ...

45 files changed, 2554 insertions, 342 deletions

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 6e57543fe0b..fee9f489269 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -5,6 +5,7 @@
 config ARM_BIG_LITTLE_CPUFREQ
 	tristate "Generic ARM big LITTLE CPUfreq driver"
 	depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK
+	select CPU_FREQ_TABLE
 	help
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
 
@@ -18,6 +19,7 @@ config ARM_DT_BL_CPUFREQ
 config ARM_EXYNOS_CPUFREQ
 	bool "SAMSUNG EXYNOS SoCs"
 	depends on ARCH_EXYNOS
+	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the CPUFreq driver common part for Samsung
@@ -46,6 +48,7 @@ config ARM_EXYNOS5250_CPUFREQ
 config ARM_EXYNOS5440_CPUFREQ
 	def_bool SOC_EXYNOS5440
 	depends on HAVE_CLK && PM_OPP && OF
+	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS5440
 	  SoC. The nature of exynos5440 clock controller is
@@ -55,7 +58,6 @@ config ARM_EXYNOS5440_CPUFREQ
 config ARM_HIGHBANK_CPUFREQ
 	tristate "Calxeda Highbank-based"
 	depends on ARCH_HIGHBANK
-	select CPU_FREQ_TABLE
 	select GENERIC_CPUFREQ_CPU0
 	select PM_OPP
 	select REGULATOR
@@ -71,6 +73,7 @@ config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6Q cpufreq support"
 	depends on SOC_IMX6Q
 	depends on REGULATOR_ANATOP
+	select CPU_FREQ_TABLE
 	help
 	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
 
@@ -86,6 +89,7 @@ config ARM_INTEGRATOR
 
 config ARM_KIRKWOOD_CPUFREQ
 	def_bool ARCH_KIRKWOOD && OF
+	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for Marvell Kirkwood
 	  SoCs.
@@ -99,6 +103,7 @@ config ARM_OMAP2PLUS_CPUFREQ
 config ARM_S3C2416_CPUFREQ
 	bool "S3C2416 CPU Frequency scaling support"
 	depends on CPU_S3C2416
+	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for the Samsung S3C2416 and
 	  S3C2450 SoC. The S3C2416 supports changing the rate of the
@@ -121,6 +126,7 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE
 config ARM_S3C64XX_CPUFREQ
 	bool "Samsung S3C64XX"
 	depends on CPU_S3C6410
+	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the CPUFreq driver for Samsung S3C6410 SoC.
@@ -147,6 +153,15 @@ config ARM_SA1110_CPUFREQ
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR
+	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the CPUFreq driver support for SPEAr SOCs.
+
+config ARM_TEGRA_CPUFREQ
+	bool "TEGRA CPUFreq support"
+	depends on ARCH_TEGRA
+	select CPU_FREQ_TABLE
+	default y
+	help
+	  This adds the CPUFreq driver support for TEGRA SOCs.
diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc
index 9c926ca0d71..25ca9db62e0 100644
--- a/drivers/cpufreq/Kconfig.powerpc
+++ b/drivers/cpufreq/Kconfig.powerpc
@@ -1,6 +1,7 @@
 config CPU_FREQ_CBE
 	tristate "CBE frequency scaling"
 	depends on CBE_RAS && PPC_CELL
+	select CPU_FREQ_TABLE
 	default m
 	help
 	  This adds the cpufreq driver for Cell BE processors.
@@ -23,3 +24,39 @@ config CPU_FREQ_MAPLE
 	help
 	  This adds support for frequency switching on Maple 970FX
 	  Evaluation Board and compatible boards (IBM JS2x blades).
+
+config PPC_CORENET_CPUFREQ
+	tristate "CPU frequency scaling driver for Freescale E500MC SoCs"
+	depends on PPC_E500MC && OF && COMMON_CLK
+	select CPU_FREQ_TABLE
+	select CLK_PPC_CORENET
+	help
+	  This adds the CPUFreq driver support for Freescale e500mc,
+	  e5500 and e6500 series SoCs which are capable of changing
+	  the CPU's frequency dynamically.
+
+config CPU_FREQ_PMAC
+	bool "Support for Apple PowerBooks"
+	depends on ADB_PMU && PPC32
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for frequency switching on Apple PowerBooks,
+	  this currently includes some models of iBook & Titanium
+	  PowerBook.
+
+config CPU_FREQ_PMAC64
+	bool "Support for some Apple G5s"
+	depends on PPC_PMAC && PPC64
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for frequency switching on Apple iMac G5,
+	  and some of the more recent desktop G5 machines as well.
+
+config PPC_PASEMI_CPUFREQ
+	bool "Support for PA Semi PWRficient"
+	depends on PPC_PASEMI
+	select CPU_FREQ_TABLE
+	default y
+	help
+	  This adds the support for frequency switching on PA Semi
+	  PWRficient processors.
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index 6bd63d63d35..e2b6eabef22 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -132,6 +132,7 @@ config X86_POWERNOW_K8
 config X86_AMD_FREQ_SENSITIVITY
 	tristate "AMD frequency sensitivity feedback powersave bias"
 	depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD
+	select CPU_FREQ_TABLE
 	help
 	  This adds AMD-specific powersave bias function to the ondemand
 	  governor, which allows it to make more power-conscious frequency
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 315b9231feb..0c8d0c69306 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -71,7 +71,7 @@ obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
 obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
-obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
+obj-$(CONFIG_ARM_TEGRA_CPUFREQ)		+= tegra-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
@@ -79,11 +79,15 @@ obj-$(CONFIG_CPU_FREQ_CBE)		+= ppc-cbe-cpufreq.o
 ppc-cbe-cpufreq-y			+= ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
 obj-$(CONFIG_CPU_FREQ_CBE_PMI)		+= ppc_cbe_cpufreq_pmi.o
 obj-$(CONFIG_CPU_FREQ_MAPLE)		+= maple-cpufreq.o
+obj-$(CONFIG_PPC_CORENET_CPUFREQ)   += ppc-corenet-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC)		+= pmac32-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC64)		+= pmac64-cpufreq.o
+obj-$(CONFIG_PPC_PASEMI_CPUFREQ)	+= pasemi-cpufreq.o
 
 ##################################################################################
 # Other platform drivers
 obj-$(CONFIG_AVR32_AT32AP_CPUFREQ)	+= at32ap-cpufreq.o
-obj-$(CONFIG_BLACKFIN)			+= blackfin-cpufreq.o
+obj-$(CONFIG_BFIN_CPU_FREQ)		+= blackfin-cpufreq.o
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index b8efacf01d6..f4fef0acc18 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -232,7 +232,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
 	perf = data->acpi_data;
 
 	for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		if (msr == perf->states[data->freq_table[i].index].status)
+		if (msr == perf->states[data->freq_table[i].driver_data].status)
 			return data->freq_table[i].frequency;
 	}
 	return data->freq_table[0].frequency;
@@ -442,7 +442,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		goto out;
 	}
 
-	next_perf_state = data->freq_table[next_state].index;
+	next_perf_state = data->freq_table[next_state].driver_data;
 	if (perf->state == next_perf_state) {
 		if (unlikely(data->resume)) {
 			pr_debug("Called after resume, resetting to P%d\n",
@@ -494,12 +494,14 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 			pr_debug("acpi_cpufreq_target failed (%d)\n",
 				policy->cpu);
 			result = -EAGAIN;
-			goto out;
+			freqs.new = freqs.old;
 		}
 	}
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	perf->state = next_perf_state;
+
+	if (!result)
+		perf->state = next_perf_state;
 
 out:
 	return result;
@@ -811,7 +813,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		    data->freq_table[valid_states-1].frequency / 1000)
 			continue;
 
-		data->freq_table[valid_states].index = i;
+		data->freq_table[valid_states].driver_data = i;
 		data->freq_table[valid_states].frequency =
 		    perf->states[i].core_frequency * 1000;
 		valid_states++;
@@ -947,7 +949,7 @@ static void __init acpi_cpufreq_boost_init(void)
 	/* We create the boost file in any case, though for systems without
 	 * hardware support it will be read-only and hardwired to return 0.
 	 */
-	if (sysfs_create_file(cpufreq_global_kobject, &(global_boost.attr)))
+	if (cpufreq_sysfs_create_file(&(global_boost.attr)))
 		pr_warn(PFX "could not register global boost sysfs file\n");
 	else
 		pr_debug("registered global boost sysfs file\n");
@@ -955,7 +957,7 @@ static void __init acpi_cpufreq_boost_init(void)
 
 static void __exit acpi_cpufreq_boost_exit(void)
 {
-	sysfs_remove_file(cpufreq_global_kobject, &(global_boost.attr));
+	cpufreq_sysfs_remove_file(&(global_boost.attr));
 
 	if (msrs) {
 		unregister_cpu_notifier(&boost_nb);
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index 5d7f53fcd6f..3549f0784af 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -84,11 +84,9 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
 	ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000);
 	if (ret) {
 		pr_err("clk_set_rate failed: %d\n", ret);
-		return ret;
+		freqs.new = freqs.old;
 	}
 
-	policy->cur = freqs.new;
-
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	return ret;
diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c
index 995511e80be..9cdbbd278a8 100644
--- a/drivers/cpufreq/blackfin-cpufreq.c
+++ b/drivers/cpufreq/blackfin-cpufreq.c
@@ -20,23 +20,23 @@
 
 
 /* this is the table of CCLK frequencies, in Hz */
-/* .index is the entry in the auxiliary dpm_state_table[] */
+/* .driver_data is the entry in the auxiliary dpm_state_table[] */
 static struct cpufreq_frequency_table bfin_freq_table[] = {
 	{
 		.frequency = CPUFREQ_TABLE_END,
-		.index = 0,
+		.driver_data = 0,
 	},
 	{
 		.frequency = CPUFREQ_TABLE_END,
-		.index = 1,
+		.driver_data = 1,
 	},
 	{
 		.frequency = CPUFREQ_TABLE_END,
-		.index = 2,
+		.driver_data = 2,
 	},
 	{
 		.frequency = CPUFREQ_TABLE_END,
-		.index = 0,
+		.driver_data = 0,
 	},
 };
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 2d53f47d174..d976e222f10 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2001 Russell King
  *            (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *            (C) 2013 Viresh Kumar <viresh.kumar@linaro.org>
  *
  *  Oct 2005 - Ashok Raj <ashok.raj@intel.com>
  *	Added handling for CPU hotplug
@@ -12,12 +13,13 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <asm/cputime.h>
 #include <linux/kernel.h>
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/notifier.h>
@@ -25,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/tick.h>
 #include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/cpu.h>
@@ -41,11 +44,13 @@
  */
 static struct cpufreq_driver *cpufreq_driver;
 static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data);
+static DEFINE_RWLOCK(cpufreq_driver_lock);
+static DEFINE_MUTEX(cpufreq_governor_lock);
+
 #ifdef CONFIG_HOTPLUG_CPU
 /* This one keeps track of the previously set governor of a removed CPU */
 static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor);
 #endif
-static DEFINE_RWLOCK(cpufreq_driver_lock);
 
 /*
  * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure
@@ -132,6 +137,51 @@ bool have_governor_per_policy(void)
 {
 	return cpufreq_driver->have_governor_per_policy;
 }
+EXPORT_SYMBOL_GPL(have_governor_per_policy);
+
+struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy)
+{
+	if (have_governor_per_policy())
+		return &policy->kobj;
+	else
+		return cpufreq_global_kobject;
+}
+EXPORT_SYMBOL_GPL(get_governor_parent_kobj);
+
+static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+{
+	u64 idle_time;
+	u64 cur_wall_time;
+	u64 busy_time;
+
+	cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
+
+	busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
+	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+
+	idle_time = cur_wall_time - busy_time;
+	if (wall)
+		*wall = cputime_to_usecs(cur_wall_time);
+
+	return cputime_to_usecs(idle_time);
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy)
+{
+	u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL);
+
+	if (idle_time == -1ULL)
+		return get_cpu_idle_time_jiffy(cpu, wall);
+	else if (!io_busy)
+		idle_time += get_cpu_iowait_time_us(cpu, wall);
+
+	return idle_time;
+}
+EXPORT_SYMBOL_GPL(get_cpu_idle_time);
 
 static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs)
 {
@@ -150,7 +200,6 @@ static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs)
 	if (!try_module_get(cpufreq_driver->owner))
 		goto err_out_unlock;
 
-
 	/* get the CPU */
 	data = per_cpu(cpufreq_cpu_data, cpu);
 
@@ -220,7 +269,7 @@ static void cpufreq_cpu_put_sysfs(struct cpufreq_policy *data)
  */
 #ifndef CONFIG_SMP
 static unsigned long l_p_j_ref;
-static unsigned int  l_p_j_ref_freq;
+static unsigned int l_p_j_ref_freq;
 
 static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 {
@@ -233,7 +282,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 		pr_debug("saving %lu as reference value for loops_per_jiffy; "
 			"freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
 	}
-	if ((val == CPUFREQ_POSTCHANGE  && ci->old != ci->new) ||
+	if ((val == CPUFREQ_POSTCHANGE && ci->old != ci->new) ||
 	    (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
 		loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
 								ci->new);
@@ -248,8 +297,7 @@ static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 }
 #endif
 
-
-void __cpufreq_notify_transition(struct cpufreq_policy *policy,
+static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
 		struct cpufreq_freqs *freqs, unsigned int state)
 {
 	BUG_ON(irqs_disabled());
@@ -294,6 +342,7 @@ void __cpufreq_notify_transition(struct cpufreq_policy *policy,
 		break;
 	}
 }
+
 /**
  * cpufreq_notify_transition - call notifier chain and adjust_jiffies
  * on frequency transition.
@@ -311,7 +360,6 @@ void cpufreq_notify_transition(struct cpufreq_policy *policy,
 EXPORT_SYMBOL_GPL(cpufreq_notify_transition);
 
 
-
 /*********************************************************************
  *                          SYSFS INTERFACE                          *
  *********************************************************************/
@@ -376,7 +424,6 @@ out:
 	return err;
 }
 
-
 /**
  * cpufreq_per_cpu_attr_read() / show_##file_name() -
  * print out cpufreq information
@@ -441,7 +488,6 @@ static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy,
 	return sprintf(buf, "%u\n", cur_freq);
 }
 
-
 /**
  * show_scaling_governor - show the current policy for the specified CPU
  */
@@ -457,7 +503,6 @@ static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf)
 	return -EINVAL;
 }
 
-
 /**
  * store_scaling_governor - store policy for the specified CPU
  */
@@ -480,8 +525,10 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
 						&new_policy.governor))
 		return -EINVAL;
 
-	/* Do not use cpufreq_set_policy here or the user_policy.max
-	   will be wrongly overridden */
+	/*
+	 * Do not use cpufreq_set_policy here or the user_policy.max
+	 * will be wrongly overridden
+	 */
 	ret = __cpufreq_set_policy(policy, &new_policy);
 
 	policy->user_policy.policy = policy->policy;
@@ -630,9 +677,6 @@ static struct attribute *default_attrs[] = {
 	NULL
 };
 
-struct kobject *cpufreq_global_kobject;
-EXPORT_SYMBOL(cpufreq_global_kobject);
-
 #define to_policy(k) container_of(k, struct cpufreq_policy, kobj)
 #define to_attr(a) container_of(a, struct freq_attr, attr)
 
@@ -703,6 +747,49 @@ static struct kobj_type ktype_cpufreq = {
 	.release	= cpufreq_sysfs_release,
 };
 
+struct kobject *cpufreq_global_kobject;
+EXPORT_SYMBOL(cpufreq_global_kobject);
+
+static int cpufreq_global_kobject_usage;
+
+int cpufreq_get_global_kobject(void)
+{
+	if (!cpufreq_global_kobject_usage++)
+		return kobject_add(cpufreq_global_kobject,
+				&cpu_subsys.dev_root->kobj, "%s", "cpufreq");
+
+	return 0;
+}
+EXPORT_SYMBOL(cpufreq_get_global_kobject);
+
+void cpufreq_put_global_kobject(void)
+{
+	if (!--cpufreq_global_kobject_usage)
+		kobject_del(cpufreq_global_kobject);
+}
+EXPORT_SYMBOL(cpufreq_put_global_kobject);
+
+int cpufreq_sysfs_create_file(const struct attribute *attr)
+{
+	int ret = cpufreq_get_global_kobject();
+
+	if (!ret) {
+		ret = sysfs_create_file(cpufreq_global_kobject, attr);
+		if (ret)
+			cpufreq_put_global_kobject();
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(cpufreq_sysfs_create_file);
+
+void cpufreq_sysfs_remove_file(const struct attribute *attr)
+{
+	sysfs_remove_file(cpufreq_global_kobject, attr);
+	cpufreq_put_global_kobject();
+}
+EXPORT_SYMBOL(cpufreq_sysfs_remove_file);
+
 /* symlink affected CPUs */
 static int cpufreq_add_dev_symlink(unsigned int cpu,
 				   struct cpufreq_policy *policy)
@@ -1005,7 +1092,8 @@ static void update_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu)
  * Caller should already have policy_rwsem in write mode for this CPU.
  * This routine frees the rwsem before returning.
  */
-static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif)
+static int __cpufreq_remove_dev(struct device *dev,
+		struct subsys_interface *sif)
 {
 	unsigned int cpu = dev->id, ret, cpus;
 	unsigned long flags;
@@ -1112,7 +1200,6 @@ static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif
 	return 0;
 }
 
-
 static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif)
 {
 	unsigned int cpu = dev->id;
@@ -1125,7 +1212,6 @@ static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif)
 	return retval;
 }
 
-
 static void handle_update(struct work_struct *work)
 {
 	struct cpufreq_policy *policy =
@@ -1136,7 +1222,8 @@ static void handle_update(struct work_struct *work)
 }
 
 /**
- *	cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're in deep trouble.
+ *	cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're
+ *	in deep trouble.
  *	@cpu: cpu number
  *	@old_freq: CPU frequency the kernel thinks the CPU runs at
  *	@new_freq: CPU frequency the CPU actually runs at
@@ -1151,7 +1238,6 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
 	struct cpufreq_freqs freqs;
 	unsigned long flags;
 
-
 	pr_debug("Warning: CPU frequency out of sync: cpufreq and timing "
 	       "core thinks of %u, is %u kHz.\n", old_freq, new_freq);
 
@@ -1166,7 +1252,6 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 }
 
-
 /**
  * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur
  * @cpu: CPU number
@@ -1212,7 +1297,6 @@ unsigned int cpufreq_quick_get_max(unsigned int cpu)
 }
 EXPORT_SYMBOL(cpufreq_quick_get_max);
 
-
 static unsigned int __cpufreq_get(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
@@ -1271,7 +1355,6 @@ static struct subsys_interface cpufreq_interface = {
 	.remove_dev	= cpufreq_remove_dev,
 };
 
-
 /**
  * cpufreq_bp_suspend - Prepare the boot CPU for system suspend.
  *
@@ -1408,11 +1491,10 @@ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list)
 }
 EXPORT_SYMBOL(cpufreq_register_notifier);
 
-
 /**
  *	cpufreq_unregister_notifier - unregister a driver with cpufreq
  *	@nb: notifier block to be unregistered
- *      @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
+ *	@list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
  *
  *	Remove a driver from the CPU frequency notifier list.
  *
@@ -1448,7 +1530,6 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier);
  *                              GOVERNORS                            *
  *********************************************************************/
 
-
 int __cpufreq_driver_target(struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
@@ -1484,10 +1565,6 @@ int cpufreq_driver_target(struct cpufreq_policy *policy,
 {
 	int ret = -EINVAL;
 
-	policy = cpufreq_cpu_get(policy->cpu);
-	if (!policy)
-		goto no_policy;
-
 	if (unlikely(lock_policy_rwsem_write(policy->cpu)))
 		goto fail;
 
@@ -1496,30 +1573,19 @@ int cpufreq_driver_target(struct cpufreq_policy *policy,
 	unlock_policy_rwsem_write(policy->cpu);
 
 fail:
-	cpufreq_cpu_put(policy);
-no_policy:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(cpufreq_driver_target);
 
 int __cpufreq_driver_getavg(struct cpufreq_policy *policy, unsigned int cpu)
 {
-	int ret = 0;
-
 	if (cpufreq_disabled())
-		return ret;
+		return 0;
 
 	if (!cpufreq_driver->getavg)
 		return 0;
 
-	policy = cpufreq_cpu_get(policy->cpu);
-	if (!policy)
-		return -EINVAL;
-
-	ret = cpufreq_driver->getavg(policy, cpu);
-
-	cpufreq_cpu_put(policy);
-	return ret;
+	return cpufreq_driver->getavg(policy, cpu);
 }
 EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg);
 
@@ -1562,6 +1628,21 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
 
 	pr_debug("__cpufreq_governor for CPU %u, event %u\n",
 						policy->cpu, event);
+
+	mutex_lock(&cpufreq_governor_lock);
+	if ((!policy->governor_enabled && (event == CPUFREQ_GOV_STOP)) ||
+	    (policy->governor_enabled && (event == CPUFREQ_GOV_START))) {
+		mutex_unlock(&cpufreq_governor_lock);
+		return -EBUSY;
+	}
+
+	if (event == CPUFREQ_GOV_STOP)
+		policy->governor_enabled = false;
+	else if (event == CPUFREQ_GOV_START)
+		policy->governor_enabled = true;
+
+	mutex_unlock(&cpufreq_governor_lock);
+
 	ret = policy->governor->governor(policy, event);
 
 	if (!ret) {
@@ -1569,6 +1650,14 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
 			policy->governor->initialized++;
 		else if (event == CPUFREQ_GOV_POLICY_EXIT)
 			policy->governor->initialized--;
+	} else {
+		/* Restore original values */
+		mutex_lock(&cpufreq_governor_lock);
+		if (event == CPUFREQ_GOV_STOP)
+			policy->governor_enabled = true;
+		else if (event == CPUFREQ_GOV_START)
+			policy->governor_enabled = false;
+		mutex_unlock(&cpufreq_governor_lock);
 	}
 
 	/* we keep one module reference alive for
@@ -1581,7 +1670,6 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
 	return ret;
 }
 
-
 int cpufreq_register_governor(struct cpufreq_governor *governor)
 {
 	int err;
@@ -1606,7 +1694,6 @@ int cpufreq_register_governor(struct cpufreq_governor *governor)
 }
 EXPORT_SYMBOL_GPL(cpufreq_register_governor);
 
-
 void cpufreq_unregister_governor(struct cpufreq_governor *governor)
 {
 #ifdef CONFIG_HOTPLUG_CPU
@@ -1636,7 +1723,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor)
 EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
 
 
-
 /*********************************************************************
  *                          POLICY INTERFACE                         *
  *********************************************************************/
@@ -1665,7 +1751,6 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu)
 }
 EXPORT_SYMBOL(cpufreq_get_policy);
 
-
 /*
  * data   : current policy.
  * policy : policy to be set.
@@ -1699,8 +1784,10 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
 			CPUFREQ_INCOMPATIBLE, policy);
 
-	/* verify the cpu speed can be set within this limit,
-	   which might be different to the first one */
+	/*
+	 * verify the cpu speed can be set within this limit, which might be
+	 * different to the first one
+	 */
 	ret = cpufreq_driver->verify(policy);
 	if (ret)
 		goto error_out;
@@ -1802,8 +1889,10 @@ int cpufreq_update_policy(unsigned int cpu)
 	policy.policy = data->user_policy.policy;
 	policy.governor = data->user_policy.governor;
 
-	/* BIOS might change freq behind our back
-	  -> ask driver for current freq and notify governors about a change */
+	/*
+	 * BIOS might change freq behind our back
+	 * -> ask driver for current freq and notify governors about a change
+	 */
 	if (cpufreq_driver->get) {
 		policy.cur = cpufreq_driver->get(cpu);
 		if (!data->cur) {
@@ -1852,7 +1941,7 @@ static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb,
 }
 
 static struct notifier_block __refdata cpufreq_cpu_notifier = {
-    .notifier_call = cpufreq_cpu_callback,
+	.notifier_call = cpufreq_cpu_callback,
 };
 
 /*********************************************************************
@@ -1864,7 +1953,7 @@ static struct notifier_block __refdata cpufreq_cpu_notifier = {
  * @driver_data: A struct cpufreq_driver containing the values#
  * submitted by the CPU Frequency driver.
  *
- *   Registers a CPU Frequency driver to this core code. This code
+ * Registers a CPU Frequency driver to this core code. This code
  * returns zero on success, -EBUSY when another driver got here first
  * (and isn't unregistered in the meantime).
  *
@@ -1931,11 +2020,10 @@ err_null_driver:
 }
 EXPORT_SYMBOL_GPL(cpufreq_register_driver);
 
-
 /**
  * cpufreq_unregister_driver - unregister the current CPUFreq driver
  *
- *    Unregister the current CPUFreq driver. Only call this if you have
+ * Unregister the current CPUFreq driver. Only call this if you have
  * the right to do so, i.e. if you have succeeded in initialising before!
  * Returns zero if successful, and -EINVAL if the cpufreq_driver is
  * currently not initialised.
@@ -1972,7 +2060,7 @@ static int __init cpufreq_core_init(void)
 		init_rwsem(&per_cpu(cpu_policy_rwsem, cpu));
 	}
 
-	cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj);
+	cpufreq_global_kobject = kobject_create();
 	BUG_ON(!cpufreq_global_kobject);
 	register_syscore_ops(&cpufreq_syscore_ops);
 
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index dc9b72e25c1..a849b2d499f 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -23,21 +23,12 @@
 #include <linux/kernel_stat.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
-#include <linux/tick.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
 #include <linux/cpu.h>
 
 #include "cpufreq_governor.h"
 
-static struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy)
-{
-	if (have_governor_per_policy())
-		return &policy->kobj;
-	else
-		return cpufreq_global_kobject;
-}
-
 static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data)
 {
 	if (have_governor_per_policy())
@@ -46,41 +37,6 @@ static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data)
 		return dbs_data->cdata->attr_group_gov_sys;
 }
 
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
-{
-	u64 idle_time;
-	u64 cur_wall_time;
-	u64 busy_time;
-
-	cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
-
-	busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
-	busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
-
-	idle_time = cur_wall_time - busy_time;
-	if (wall)
-		*wall = cputime_to_usecs(cur_wall_time);
-
-	return cputime_to_usecs(idle_time);
-}
-
-u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy)
-{
-	u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL);
-
-	if (idle_time == -1ULL)
-		return get_cpu_idle_time_jiffy(cpu, wall);
-	else if (!io_busy)
-		idle_time += get_cpu_iowait_time_us(cpu, wall);
-
-	return idle_time;
-}
-EXPORT_SYMBOL_GPL(get_cpu_idle_time);
-
 void dbs_check_cpu(struct dbs_data *dbs_data, int cpu)
 {
 	struct cpu_dbs_common_info *cdbs = dbs_data->cdata->get_cpu_cdbs(cpu);
@@ -278,6 +234,9 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 			return rc;
 		}
 
+		if (!have_governor_per_policy())
+			WARN_ON(cpufreq_get_global_kobject());
+
 		rc = sysfs_create_group(get_governor_parent_kobj(policy),
 				get_sysfs_attr(dbs_data));
 		if (rc) {
@@ -316,6 +275,9 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 			sysfs_remove_group(get_governor_parent_kobj(policy),
 					get_sysfs_attr(dbs_data));
 
+			if (!have_governor_per_policy())
+				cpufreq_put_global_kobject();
+
 			if ((dbs_data->cdata->governor == GOV_CONSERVATIVE) &&
 				(policy->governor->initialized == 1)) {
 				struct cs_ops *cs_ops = dbs_data->cdata->gov_ops;
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index e16a96130cb..6663ec3b305 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -81,7 +81,7 @@ static ssize_t show_##file_name##_gov_sys				\
 	return sprintf(buf, "%u\n", tuners->file_name);			\
 }									\
 									\
-static ssize_t show_##file_name##_gov_pol					\
+static ssize_t show_##file_name##_gov_pol				\
 (struct cpufreq_policy *policy, char *buf)				\
 {									\
 	struct dbs_data *dbs_data = policy->governor_data;		\
@@ -91,7 +91,7 @@ static ssize_t show_##file_name##_gov_pol					\
 
 #define store_one(_gov, file_name)					\
 static ssize_t store_##file_name##_gov_sys				\
-(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count)	\
+(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \
 {									\
 	struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data;		\
 	return store_##file_name(dbs_data, buf, count);			\
@@ -256,7 +256,6 @@ static ssize_t show_sampling_rate_min_gov_pol				\
 	return sprintf(buf, "%u\n", dbs_data->min_sampling_rate);	\
 }
 
-u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy);
 void dbs_check_cpu(struct dbs_data *dbs_data, int cpu);
 bool need_load_eval(struct cpu_dbs_common_info *cdbs,
 		unsigned int sampling_rate);
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index ceee06849b9..9fef7d6e4e6 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -17,7 +17,6 @@
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 
-
 static int cpufreq_governor_performance(struct cpufreq_policy *policy,
 					unsigned int event)
 {
@@ -44,19 +43,16 @@ struct cpufreq_governor cpufreq_gov_performance = {
 	.owner		= THIS_MODULE,
 };
 
-
 static int __init cpufreq_gov_performance_init(void)
 {
 	return cpufreq_register_governor(&cpufreq_gov_performance);
 }
 
-
 static void __exit cpufreq_gov_performance_exit(void)
 {
 	cpufreq_unregister_governor(&cpufreq_gov_performance);
 }
 
-
 MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
 MODULE_DESCRIPTION("CPUfreq policy governor 'performance'");
 MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index 2d948a17115..32109a14f5d 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -1,7 +1,7 @@
 /*
- *  linux/drivers/cpufreq/cpufreq_powersave.c
+ * linux/drivers/cpufreq/cpufreq_powersave.c
  *
- *  Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
  *
  *
  * This program is free software; you can redistribute it and/or modify
@@ -48,13 +48,11 @@ static int __init cpufreq_gov_powersave_init(void)
 	return cpufreq_register_governor(&cpufreq_gov_powersave);
 }
 
-
 static void __exit cpufreq_gov_powersave_exit(void)
 {
 	cpufreq_unregister_governor(&cpufreq_gov_powersave);
 }
 
-
 MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
 MODULE_DESCRIPTION("CPUfreq policy governor 'powersave'");
 MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index fb65decffa2..6d35caa9116 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -27,7 +27,7 @@ static spinlock_t cpufreq_stats_lock;
 struct cpufreq_stats {
 	unsigned int cpu;
 	unsigned int total_trans;
-	unsigned long long  last_time;
+	unsigned long long last_time;
 	unsigned int max_state;
 	unsigned int state_num;
 	unsigned int last_index;
@@ -116,7 +116,7 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
 		len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ",
 				stat->freq_table[i]);
 
-		for (j = 0; j < stat->state_num; j++)   {
+		for (j = 0; j < stat->state_num; j++) {
 			if (len >= PAGE_SIZE)
 				break;
 			len += snprintf(buf + len, PAGE_SIZE - len, "%9u ",
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index bbeb9c0720a..03078090b5f 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -13,55 +13,13 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/sysfs.h>
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 
-/**
- * A few values needed by the userspace governor
- */
-static DEFINE_PER_CPU(unsigned int, cpu_max_freq);
-static DEFINE_PER_CPU(unsigned int, cpu_min_freq);
-static DEFINE_PER_CPU(unsigned int, cpu_cur_freq); /* current CPU freq */
-static DEFINE_PER_CPU(unsigned int, cpu_set_freq); /* CPU freq desired by
-							userspace */
 static DEFINE_PER_CPU(unsigned int, cpu_is_managed);
-
 static DEFINE_MUTEX(userspace_mutex);
-static int cpus_using_userspace_governor;
-
-/* keep track of frequency transitions */
-static int
-userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
-	void *data)
-{
-	struct cpufreq_freqs *freq = data;
-
-	if (!per_cpu(cpu_is_managed, freq->cpu))
-		return 0;
-
-	if (val == CPUFREQ_POSTCHANGE) {
-		pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n",
-				freq->cpu, freq->new);
-		per_cpu(cpu_cur_freq, freq->cpu) = freq->new;
-	}
-
-	return 0;
-}
-
-static struct notifier_block userspace_cpufreq_notifier_block = {
-	.notifier_call  = userspace_cpufreq_notifier
-};
-
 
 /**
  * cpufreq_set - set the CPU frequency
@@ -80,13 +38,6 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
 	if (!per_cpu(cpu_is_managed, policy->cpu))
 		goto err;
 
-	per_cpu(cpu_set_freq, policy->cpu) = freq;
-
-	if (freq < per_cpu(cpu_min_freq, policy->cpu))
-		freq = per_cpu(cpu_min_freq, policy->cpu);
-	if (freq > per_cpu(cpu_max_freq, policy->cpu))
-		freq = per_cpu(cpu_max_freq, policy->cpu);
-
 	/*
 	 * We're safe from concurrent calls to ->target() here
 	 * as we hold the userspace_mutex lock. If we were calling
@@ -104,10 +55,9 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
 	return ret;
 }
 
-
 static ssize_t show_speed(struct cpufreq_policy *policy, char *buf)
 {
-	return sprintf(buf, "%u\n", per_cpu(cpu_cur_freq, policy->cpu));
+	return sprintf(buf, "%u\n", policy->cur);
 }
 
 static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
@@ -119,73 +69,37 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 	switch (event) {
 	case CPUFREQ_GOV_START:
 		BUG_ON(!policy->cur);
-		mutex_lock(&userspace_mutex);
-
-		if (cpus_using_userspace_governor == 0) {
-			cpufreq_register_notifier(
-					&userspace_cpufreq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-		}
-		cpus_using_userspace_governor++;
+		pr_debug("started managing cpu %u\n", cpu);
 
+		mutex_lock(&userspace_mutex);
 		per_cpu(cpu_is_managed, cpu) = 1;
-		per_cpu(cpu_min_freq, cpu) = policy->min;
-		per_cpu(cpu_max_freq, cpu) = policy->max;
-		per_cpu(cpu_cur_freq, cpu) = policy->cur;
-		per_cpu(cpu_set_freq, cpu) = policy->cur;
-		pr_debug("managing cpu %u started "
-			"(%u - %u kHz, currently %u kHz)\n",
-				cpu,
-				per_cpu(cpu_min_freq, cpu),
-				per_cpu(cpu_max_freq, cpu),
-				per_cpu(cpu_cur_freq, cpu));
-
 		mutex_unlock(&userspace_mutex);
 		break;
 	case CPUFREQ_GOV_STOP:
-		mutex_lock(&userspace_mutex);
-		cpus_using_userspace_governor--;
-		if (cpus_using_userspace_governor == 0) {
-			cpufreq_unregister_notifier(
-					&userspace_cpufreq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-		}
+		pr_debug("managing cpu %u stopped\n", cpu);
 
+		mutex_lock(&userspace_mutex);
 		per_cpu(cpu_is_managed, cpu) = 0;
-		per_cpu(cpu_min_freq, cpu) = 0;
-		per_cpu(cpu_max_freq, cpu) = 0;
-		per_cpu(cpu_set_freq, cpu) = 0;
-		pr_debug("managing cpu %u stopped\n", cpu);
 		mutex_unlock(&userspace_mutex);
 		break;
 	case CPUFREQ_GOV_LIMITS:
 		mutex_lock(&userspace_mutex);
-		pr_debug("limit event for cpu %u: %u - %u kHz, "
-			"currently %u kHz, last set to %u kHz\n",
+		pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n",
 			cpu, policy->min, policy->max,
-			per_cpu(cpu_cur_freq, cpu),
-			per_cpu(cpu_set_freq, cpu));
-		if (policy->max < per_cpu(cpu_set_freq, cpu)) {
+			policy->cur);
+
+		if (policy->max < policy->cur)
 			__cpufreq_driver_target(policy, policy->max,
 						CPUFREQ_RELATION_H);
-		} else if (policy->min > per_cpu(cpu_set_freq, cpu)) {
+		else if (policy->min > policy->cur)
 			__cpufreq_driver_target(policy, policy->min,
 						CPUFREQ_RELATION_L);
-		} else {
-			__cpufreq_driver_target(policy,
-						per_cpu(cpu_set_freq, cpu),
-						CPUFREQ_RELATION_L);
-		}
-		per_cpu(cpu_min_freq, cpu) = policy->min;
-		per_cpu(cpu_max_freq, cpu) = policy->max;
-		per_cpu(cpu_cur_freq, cpu) = policy->cur;
 		mutex_unlock(&userspace_mutex);
 		break;
 	}
 	return rc;
 }
 
-
 #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE
 static
 #endif
@@ -202,13 +116,11 @@ static int __init cpufreq_gov_userspace_init(void)
 	return cpufreq_register_governor(&cpufreq_gov_userspace);
 }
 
-
 static void __exit cpufreq_gov_userspace_exit(void)
 {
 	cpufreq_unregister_governor(&cpufreq_gov_userspace);
 }
 
-
 MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>, "
 		"Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'");
diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
index c33c76c360f..551dd655c6f 100644
--- a/drivers/cpufreq/davinci-cpufreq.c
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -114,6 +114,9 @@ static int davinci_target(struct cpufreq_policy *policy,
 		pdata->set_voltage(idx);
 
 out:
+	if (ret)
+		freqs.new = freqs.old;
+
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	return ret;
diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
index 6ec6539ae04..1fdb02b9f1e 100644
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -57,13 +57,13 @@ static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
 	if (ret) {
 		pr_err("dbx500-cpufreq: Failed to set armss_clk to %d Hz: error %d\n",
 		       freqs.new * 1000, ret);
-		return ret;
+		freqs.new = freqs.old;
 	}
 
 	/* post change notification */
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
-	return 0;
+	return ret;
 }
 
 static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu)
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 37380fb9262..a60efaeb4cf 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -161,6 +161,9 @@ postchange:
 		current_multiplier);
 	}
 #endif
+	if (err)
+		freqs.new = freqs.old;
+
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	return err;
 }
@@ -188,7 +191,7 @@ static int eps_target(struct cpufreq_policy *policy,
 	}
 
 	/* Make frequency transition */
-	dest_state = centaur->freq_table[newstate].index & 0xffff;
+	dest_state = centaur->freq_table[newstate].driver_data & 0xffff;
 	ret = eps_set_state(centaur, policy, dest_state);
 	if (ret)
 		printk(KERN_ERR "eps: Timeout!\n");
@@ -380,9 +383,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 	f_table = &centaur->freq_table[0];
 	if (brand != EPS_BRAND_C7M) {
 		f_table[0].frequency = fsb * min_multiplier;
-		f_table[0].index = (min_multiplier << 8) | min_voltage;
+		f_table[0].driver_data = (min_multiplier << 8) | min_voltage;
 		f_table[1].frequency = fsb * max_multiplier;
-		f_table[1].index = (max_multiplier << 8) | max_voltage;
+		f_table[1].driver_data = (max_multiplier << 8) | max_voltage;
 		f_table[2].frequency = CPUFREQ_TABLE_END;
 	} else {
 		k = 0;
@@ -391,7 +394,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 		for (i = min_multiplier; i <= max_multiplier; i++) {
 			voltage = (k * step) / 256 + min_voltage;
 			f_table[k].frequency = fsb * i;
-			f_table[k].index = (i << 8) | voltage;
+			f_table[k].driver_data = (i << 8) | voltage;
 			k++;
 		}
 		f_table[k].frequency = CPUFREQ_TABLE_END;
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 475b4f607f0..0d32f02ef4d 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -113,7 +113,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		if (ret) {
 			pr_err("%s: failed to set cpu voltage to %d\n",
 				__func__, arm_volt);
-			goto out;
+			freqs.new = freqs.old;
+			goto post_notify;
 		}
 	}
 
@@ -123,14 +124,19 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		if (ret) {
 			pr_err("%s: failed to set cpu voltage to %d\n",
 				__func__, safe_arm_volt);
-			goto out;
+			freqs.new = freqs.old;
+			goto post_notify;
 		}
 	}
 
 	exynos_info->set_freq(old_index, index);
 
+post_notify:
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
+	if (ret)
+		goto out;
+
 	/* When the new frequency is lower than current frequency */
 	if ((freqs.new < freqs.old) ||
 	   ((freqs.new > freqs.old) && safe_arm_volt)) {
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index d7a79662e24..f0d87412cc9 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -34,8 +34,8 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
 
 			continue;
 		}
-		pr_debug("table entry %u: %u kHz, %u index\n",
-					i, freq, table[i].index);
+		pr_debug("table entry %u: %u kHz, %u driver_data\n",
+					i, freq, table[i].driver_data);
 		if (freq < min_freq)
 			min_freq = freq;
 		if (freq > max_freq)
@@ -97,11 +97,11 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 				   unsigned int *index)
 {
 	struct cpufreq_frequency_table optimal = {
-		.index = ~0,
+		.driver_data = ~0,
 		.frequency = 0,
 	};
 	struct cpufreq_frequency_table suboptimal = {
-		.index = ~0,
+		.driver_data = ~0,
 		.frequency = 0,
 	};
 	unsigned int i;
@@ -129,12 +129,12 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 			if (freq <= target_freq) {
 				if (freq >= optimal.frequency) {
 					optimal.frequency = freq;
-					optimal.index = i;
+					optimal.driver_data = i;
 				}
 			} else {
 				if (freq <= suboptimal.frequency) {
 					suboptimal.frequency = freq;
-					suboptimal.index = i;
+					suboptimal.driver_data = i;
 				}
 			}
 			break;
@@ -142,26 +142,26 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 			if (freq >= target_freq) {
 				if (freq <= optimal.frequency) {
 					optimal.frequency = freq;
-					optimal.index = i;
+					optimal.driver_data = i;
 				}
 			} else {
 				if (freq >= suboptimal.frequency) {
 					suboptimal.frequency = freq;
-					suboptimal.index = i;
+					suboptimal.driver_data = i;
 				}
 			}
 			break;
 		}
 	}
-	if (optimal.index > i) {
-		if (suboptimal.index > i)
+	if (optimal.driver_data > i) {
+		if (suboptimal.driver_data > i)
 			return -EINVAL;
-		*index = suboptimal.index;
+		*index = suboptimal.driver_data;
 	} else
-		*index = optimal.index;
+		*index = optimal.driver_data;
 
 	pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
-		table[*index].index);
+		table[*index].driver_data);
 
 	return 0;
 }
diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c
index c0075dbaa63..573c14ea802 100644
--- a/drivers/cpufreq/ia64-acpi-cpufreq.c
+++ b/drivers/cpufreq/ia64-acpi-cpufreq.c
@@ -326,7 +326,7 @@ acpi_cpufreq_cpu_init (
 	/* table init */
 	for (i = 0; i <= data->acpi_data.state_count; i++)
 	{
-		data->freq_table[i].index = i;
+		data->freq_table[i].driver_data = i;
 		if (i < data->acpi_data.state_count) {
 			data->freq_table[i].frequency =
 			      data->acpi_data.states[i].core_frequency * 1000;
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index b78bc35973b..e37cdaedbb5 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -68,8 +68,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
 	if (freqs.old == freqs.new)
 		return 0;
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	rcu_read_lock();
 	opp = opp_find_freq_ceil(cpu_dev, &freq_hz);
 	if (IS_ERR(opp)) {
@@ -86,13 +84,16 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
 		freqs.old / 1000, volt_old / 1000,
 		freqs.new / 1000, volt / 1000);
 
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+
 	/* scaling up?  scale voltage before frequency */
 	if (freqs.new > freqs.old) {
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
 		if (ret) {
 			dev_err(cpu_dev,
 				"failed to scale vddarm up: %d\n", ret);
-			return ret;
+			freqs.new = freqs.old;
+			goto post_notify;
 		}
 
 		/*
@@ -145,15 +146,18 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
 	if (ret) {
 		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
 		regulator_set_voltage_tol(arm_reg, volt_old, 0);
-		return ret;
+		freqs.new = freqs.old;
+		goto post_notify;
 	}
 
 	/* scaling down?  scale voltage after frequency */
 	if (freqs.new < freqs.old) {
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
-		if (ret)
+		if (ret) {
 			dev_warn(cpu_dev,
 				 "failed to scale vddarm down: %d\n", ret);
+			ret = 0;
+		}
 
 		if (freqs.old == FREQ_1P2_GHZ / 1000) {
 			regulator_set_voltage_tol(pu_reg,
@@ -163,9 +167,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
 		}
 	}
 
+post_notify:
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
-	return 0;
+	return ret;
 }
 
 static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c
index b2644af985e..c233ea61736 100644
--- a/drivers/cpufreq/kirkwood-cpufreq.c
+++ b/drivers/cpufreq/kirkwood-cpufreq.c
@@ -59,7 +59,7 @@ static void kirkwood_cpufreq_set_cpu_state(struct cpufreq_policy *policy,
 		unsigned int index)
 {
 	struct cpufreq_freqs freqs;
-	unsigned int state = kirkwood_freq_table[index].index;
+	unsigned int state = kirkwood_freq_table[index].driver_data;
 	unsigned long reg;
 
 	freqs.old = kirkwood_cpufreq_get_cpu_frequency(0);
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index b448638e34d..b6a0a7a406b 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -254,7 +254,7 @@ static void longhaul_setstate(struct cpufreq_policy *policy,
 	u32 bm_timeout = 1000;
 	unsigned int dir = 0;
 
-	mults_index = longhaul_table[table_index].index;
+	mults_index = longhaul_table[table_index].driver_data;
 	/* Safety precautions */
 	mult = mults[mults_index & 0x1f];
 	if (mult == -1)
@@ -487,7 +487,7 @@ static int __cpuinit longhaul_get_ranges(void)
 		if (ratio > maxmult || ratio < minmult)
 			continue;
 		longhaul_table[k].frequency = calc_speed(ratio);
-		longhaul_table[k].index	= j;
+		longhaul_table[k].driver_data	= j;
 		k++;
 	}
 	if (k <= 1) {
@@ -508,8 +508,8 @@ static int __cpuinit longhaul_get_ranges(void)
 		if (min_i != j) {
 			swap(longhaul_table[j].frequency,
 			     longhaul_table[min_i].frequency);
-			swap(longhaul_table[j].index,
-			     longhaul_table[min_i].index);
+			swap(longhaul_table[j].driver_data,
+			     longhaul_table[min_i].driver_data);
 		}
 	}
 
@@ -517,7 +517,7 @@ static int __cpuinit longhaul_get_ranges(void)
 
 	/* Find index we are running on */
 	for (j = 0; j < k; j++) {
-		if (mults[longhaul_table[j].index & 0x1f] == mult) {
+		if (mults[longhaul_table[j].driver_data & 0x1f] == mult) {
 			longhaul_index = j;
 			break;
 		}
@@ -613,7 +613,7 @@ static void __cpuinit longhaul_setup_voltagescaling(void)
 			pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
 		else
 			pos = minvid.pos;
-		longhaul_table[j].index |= mV_vrm_table[pos] << 8;
+		longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8;
 		vid = vrm_mV_table[mV_vrm_table[pos]];
 		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
 				speed, j, vid.mV);
@@ -656,12 +656,12 @@ static int longhaul_target(struct cpufreq_policy *policy,
 		 * this in hardware, C3 is old and we need to do this
 		 * in software. */
 		i = longhaul_index;
-		current_vid = (longhaul_table[longhaul_index].index >> 8);
+		current_vid = (longhaul_table[longhaul_index].driver_data >> 8);
 		current_vid &= 0x1f;
 		if (table_index > longhaul_index)
 			dir = 1;
 		while (i != table_index) {
-			vid = (longhaul_table[i].index >> 8) & 0x1f;
+			vid = (longhaul_table[i].driver_data >> 8) & 0x1f;
 			if (vid != current_vid) {
 				longhaul_setstate(policy, i);
 				current_vid = vid;
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index d5391276894..bb838b98507 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -72,7 +72,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 
 	freq =
 	    ((cpu_clock_freq / 1000) *
-	     loongson2_clockmod_table[newstate].index) / 8;
+	     loongson2_clockmod_table[newstate].driver_data) / 8;
 	if (freq < policy->min || freq > policy->max)
 		return -EINVAL;
 
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 0279d18a57f..29468a522ee 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -93,9 +93,6 @@ static int omap_target(struct cpufreq_policy *policy,
 	if (freqs.old == freqs.new && policy->cur == freqs.new)
 		return ret;
 
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	freq = freqs.new * 1000;
 	ret = clk_round_rate(mpu_clk, freq);
 	if (IS_ERR_VALUE(ret)) {
@@ -125,6 +122,9 @@ static int omap_target(struct cpufreq_policy *policy,
 		freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
 		freqs.new / 1000, volt ? volt / 1000 : -1);
 
+	/* notifiers */
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+
 	/* scaling up?  scale voltage before frequency */
 	if (mpu_reg && (freqs.new > freqs.old)) {
 		r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c
index 421ef37d0bb..9ee78170ff8 100644
--- a/drivers/cpufreq/p4-clockmod.c
+++ b/drivers/cpufreq/p4-clockmod.c
@@ -118,7 +118,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 		return -EINVAL;
 
 	freqs.old = cpufreq_p4_get(policy->cpu);
-	freqs.new = stock_freq * p4clockmod_table[newstate].index / 8;
+	freqs.new = stock_freq * p4clockmod_table[newstate].driver_data / 8;
 
 	if (freqs.new == freqs.old)
 		return 0;
@@ -131,7 +131,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	 * Developer's Manual, Volume 3
 	 */
 	for_each_cpu(i, policy->cpus)
-		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
+		cpufreq_p4_setdc(i, p4clockmod_table[newstate].driver_data);
 
 	/* notifiers */
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
new file mode 100644
index 00000000000..b704da40406
--- /dev/null
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Authors: Egor Martovetsky <egor@pasemi.com>
+ *	    Olof Johansson <olof@lixom.net>
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c:
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+
+#include <asm/hw_irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/smp.h>
+
+#define SDCASR_REG		0x0100
+#define SDCASR_REG_STRIDE	0x1000
+#define SDCPWR_CFGA0_REG	0x0100
+#define SDCPWR_PWST0_REG	0x0000
+#define SDCPWR_GIZTIME_REG	0x0440
+
+/* SDCPWR_GIZTIME_REG fields */
+#define SDCPWR_GIZTIME_GR	0x80000000
+#define SDCPWR_GIZTIME_LONGLOCK	0x000000ff
+
+/* Offset of ASR registers from SDC base */
+#define SDCASR_OFFSET		0x120000
+
+static void __iomem *sdcpwr_mapbase;
+static void __iomem *sdcasr_mapbase;
+
+static DEFINE_MUTEX(pas_switch_mutex);
+
+/* Current astate, is used when waking up from power savings on
+ * one core, in case the other core has switched states during
+ * the idle time.
+ */
+static int current_astate;
+
+/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */
+static struct cpufreq_frequency_table pas_freqs[] = {
+	{0,	0},
+	{1,	0},
+	{2,	0},
+	{3,	0},
+	{4,	0},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr *pas_cpu_freqs_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+/*
+ * hardware specific functions
+ */
+
+static int get_astate_freq(int astate)
+{
+	u32 ret;
+	ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10));
+
+	return ret & 0x3f;
+}
+
+static int get_cur_astate(int cpu)
+{
+	u32 ret;
+
+	ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG);
+	ret = (ret >> (cpu * 4)) & 0x7;
+
+	return ret;
+}
+
+static int get_gizmo_latency(void)
+{
+	u32 giztime, ret;
+
+	giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG);
+
+	/* just provide the upper bound */
+	if (giztime & SDCPWR_GIZTIME_GR)
+		ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000;
+	else
+		ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000;
+
+	return ret;
+}
+
+static void set_astate(int cpu, unsigned int astate)
+{
+	unsigned long flags;
+
+	/* Return if called before init has run */
+	if (unlikely(!sdcasr_mapbase))
+		return;
+
+	local_irq_save(flags);
+
+	out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate);
+
+	local_irq_restore(flags);
+}
+
+int check_astate(void)
+{
+	return get_cur_astate(hard_smp_processor_id());
+}
+
+void restore_astate(int cpu)
+{
+	set_astate(cpu, current_astate);
+}
+
+/*
+ * cpufreq functions
+ */
+
+static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	const u32 *max_freqp;
+	u32 max_freq;
+	int i, cur_astate;
+	struct resource res;
+	struct device_node *cpu, *dn;
+	int err = -ENODEV;
+
+	cpu = of_get_cpu_node(policy->cpu, NULL);
+
+	if (!cpu)
+		goto out;
+
+	dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
+	if (!dn)
+		dn = of_find_compatible_node(NULL, NULL,
+					     "pasemi,pwrficient-sdc");
+	if (!dn)
+		goto out;
+	err = of_address_to_resource(dn, 0, &res);
+	of_node_put(dn);
+	if (err)
+		goto out;
+	sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000);
+	if (!sdcasr_mapbase) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo");
+	if (!dn)
+		dn = of_find_compatible_node(NULL, NULL,
+					     "pasemi,pwrficient-gizmo");
+	if (!dn) {
+		err = -ENODEV;
+		goto out_unmap_sdcasr;
+	}
+	err = of_address_to_resource(dn, 0, &res);
+	of_node_put(dn);
+	if (err)
+		goto out_unmap_sdcasr;
+	sdcpwr_mapbase = ioremap(res.start, 0x1000);
+	if (!sdcpwr_mapbase) {
+		err = -EINVAL;
+		goto out_unmap_sdcasr;
+	}
+
+	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
+
+	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
+	if (!max_freqp) {
+		err = -EINVAL;
+		goto out_unmap_sdcpwr;
+	}
+
+	/* we need the freq in kHz */
+	max_freq = *max_freqp / 1000;
+
+	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
+	pr_debug("initializing frequency table\n");
+
+	/* initialize frequency table */
+	for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
+		pas_freqs[i].frequency =
+			get_astate_freq(pas_freqs[i].driver_data) * 100000;
+		pr_debug("%d: %d\n", i, pas_freqs[i].frequency);
+	}
+
+	policy->cpuinfo.transition_latency = get_gizmo_latency();
+
+	cur_astate = get_cur_astate(policy->cpu);
+	pr_debug("current astate is at %d\n",cur_astate);
+
+	policy->cur = pas_freqs[cur_astate].frequency;
+	cpumask_copy(policy->cpus, cpu_online_mask);
+
+	ppc_proc_freq = policy->cur * 1000ul;
+
+	cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu);
+
+	/* this ensures that policy->cpuinfo_min and policy->cpuinfo_max
+	 * are set correctly
+	 */
+	return cpufreq_frequency_table_cpuinfo(policy, pas_freqs);
+
+out_unmap_sdcpwr:
+	iounmap(sdcpwr_mapbase);
+
+out_unmap_sdcasr:
+	iounmap(sdcasr_mapbase);
+out:
+	return err;
+}
+
+static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	/*
+	 * We don't support CPU hotplug. Don't unmap after the system
+	 * has already made it to a running state.
+	 */
+	if (system_state != SYSTEM_BOOTING)
+		return 0;
+
+	if (sdcasr_mapbase)
+		iounmap(sdcasr_mapbase);
+	if (sdcpwr_mapbase)
+		iounmap(sdcpwr_mapbase);
+
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static int pas_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, pas_freqs);
+}
+
+static int pas_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	int pas_astate_new;
+	int i;
+
+	cpufreq_frequency_table_target(policy,
+				       pas_freqs,
+				       target_freq,
+				       relation,
+				       &pas_astate_new);
+
+	freqs.old = policy->cur;
+	freqs.new = pas_freqs[pas_astate_new].frequency;
+
+	mutex_lock(&pas_switch_mutex);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+
+	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
+		 policy->cpu,
+		 pas_freqs[pas_astate_new].frequency,
+		 pas_freqs[pas_astate_new].driver_data);
+
+	current_astate = pas_astate_new;
+
+	for_each_online_cpu(i)
+		set_astate(i, pas_astate_new);
+
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	mutex_unlock(&pas_switch_mutex);
+
+	ppc_proc_freq = freqs.new * 1000ul;
+	return 0;
+}
+
+static struct cpufreq_driver pas_cpufreq_driver = {
+	.name		= "pas-cpufreq",
+	.owner		= THIS_MODULE,
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= pas_cpufreq_cpu_init,
+	.exit		= pas_cpufreq_cpu_exit,
+	.verify		= pas_cpufreq_verify,
+	.target		= pas_cpufreq_target,
+	.attr		= pas_cpu_freqs_attr,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init pas_cpufreq_init(void)
+{
+	if (!of_machine_is_compatible("PA6T-1682M") &&
+	    !of_machine_is_compatible("pasemi,pwrficient"))
+		return -ENODEV;
+
+	return cpufreq_register_driver(&pas_cpufreq_driver);
+}
+
+static void __exit pas_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pas_cpufreq_driver);
+}
+
+module_init(pas_cpufreq_init);
+module_exit(pas_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>");
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index 0de00081a81..1581fcc4cf4 100644
--- a/drivers/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -243,6 +243,8 @@ static int pcc_cpufreq_target(struct cpufreq_policy *policy,
 	return 0;
 
 cmd_incomplete:
+	freqs.new = freqs.old;
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	iowrite16(0, &pcch_hdr->status);
 	spin_unlock(&pcc_lock);
 	return -EINVAL;
diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
new file mode 100644
index 00000000000..3104fad8248
--- /dev/null
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -0,0 +1,721 @@
+/*
+ *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  Copyright (C) 2004        John Steele Scott <toojays@toojays.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: Need a big cleanup here. Basically, we need to have different
+ * cpufreq_driver structures for the different type of HW instead of the
+ * current mess. We also need to better deal with the detection of the
+ * type of machine.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/mmu_context.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/keylargo.h>
+#include <asm/switch_to.h>
+
+/* WARNING !!! This will cause calibrate_delay() to be called,
+ * but this is an __init function ! So you MUST go edit
+ * init/main.c to make it non-init before enabling DEBUG_FREQ
+ */
+#undef DEBUG_FREQ
+
+extern void low_choose_7447a_dfs(int dfs);
+extern void low_choose_750fx_pll(int pll);
+extern void low_sleep_handler(void);
+
+/*
+ * Currently, PowerMac cpufreq supports only high & low frequencies
+ * that are set by the firmware
+ */
+static unsigned int low_freq;
+static unsigned int hi_freq;
+static unsigned int cur_freq;
+static unsigned int sleep_freq;
+static unsigned long transition_latency;
+
+/*
+ * Different models uses different mechanisms to switch the frequency
+ */
+static int (*set_speed_proc)(int low_speed);
+static unsigned int (*get_speed_proc)(void);
+
+/*
+ * Some definitions used by the various speedprocs
+ */
+static u32 voltage_gpio;
+static u32 frequency_gpio;
+static u32 slew_done_gpio;
+static int no_schedule;
+static int has_cpu_l2lve;
+static int is_pmu_based;
+
+/* There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+#define CPUFREQ_HIGH                  0
+#define CPUFREQ_LOW                   1
+
+static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
+	{CPUFREQ_HIGH, 		0},
+	{CPUFREQ_LOW,		0},
+	{0,			CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* pmac_cpu_freqs_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static inline void local_delay(unsigned long ms)
+{
+	if (no_schedule)
+		mdelay(ms);
+	else
+		msleep(ms);
+}
+
+#ifdef DEBUG_FREQ
+static inline void debug_calc_bogomips(void)
+{
+	/* This will cause a recalc of bogomips and display the
+	 * result. We backup/restore the value to avoid affecting the
+	 * core cpufreq framework's own calculation.
+	 */
+	unsigned long save_lpj = loops_per_jiffy;
+	calibrate_delay();
+	loops_per_jiffy = save_lpj;
+}
+#endif /* DEBUG_FREQ */
+
+/* Switch CPU speed under 750FX CPU control
+ */
+static int cpu_750fx_cpu_speed(int low_speed)
+{
+	u32 hid2;
+
+	if (low_speed == 0) {
+		/* ramping up, set voltage first */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Make sure we sleep for at least 1ms */
+		local_delay(10);
+
+		/* tweak L2 for high voltage */
+		if (has_cpu_l2lve) {
+			hid2 = mfspr(SPRN_HID2);
+			hid2 &= ~0x2000;
+			mtspr(SPRN_HID2, hid2);
+		}
+	}
+#ifdef CONFIG_6xx
+	low_choose_750fx_pll(low_speed);
+#endif
+	if (low_speed == 1) {
+		/* tweak L2 for low voltage */
+		if (has_cpu_l2lve) {
+			hid2 = mfspr(SPRN_HID2);
+			hid2 |= 0x2000;
+			mtspr(SPRN_HID2, hid2);
+		}
+
+		/* ramping down, set voltage last */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		local_delay(10);
+	}
+
+	return 0;
+}
+
+static unsigned int cpu_750fx_get_cpu_speed(void)
+{
+	if (mfspr(SPRN_HID1) & HID1_PS)
+		return low_freq;
+	else
+		return hi_freq;
+}
+
+/* Switch CPU speed using DFS */
+static int dfs_set_cpu_speed(int low_speed)
+{
+	if (low_speed == 0) {
+		/* ramping up, set voltage first */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Make sure we sleep for at least 1ms */
+		local_delay(1);
+	}
+
+	/* set frequency */
+#ifdef CONFIG_6xx
+	low_choose_7447a_dfs(low_speed);
+#endif
+	udelay(100);
+
+	if (low_speed == 1) {
+		/* ramping down, set voltage last */
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		local_delay(1);
+	}
+
+	return 0;
+}
+
+static unsigned int dfs_get_cpu_speed(void)
+{
+	if (mfspr(SPRN_HID1) & HID1_DFS)
+		return low_freq;
+	else
+		return hi_freq;
+}
+
+
+/* Switch CPU speed using slewing GPIOs
+ */
+static int gpios_set_cpu_speed(int low_speed)
+{
+	int gpio, timeout = 0;
+
+	/* If ramping up, set voltage first */
+	if (low_speed == 0) {
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+		/* Delay is way too big but it's ok, we schedule */
+		local_delay(10);
+	}
+
+	/* Set frequency */
+	gpio = 	pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+	if (low_speed == ((gpio & 0x01) == 0))
+		goto skip;
+
+	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
+			  low_speed ? 0x04 : 0x05);
+	udelay(200);
+	do {
+		if (++timeout > 100)
+			break;
+		local_delay(1);
+		gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
+	} while((gpio & 0x02) == 0);
+ skip:
+	/* If ramping down, set voltage last */
+	if (low_speed == 1) {
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+		/* Delay is way too big but it's ok, we schedule */
+		local_delay(10);
+	}
+
+#ifdef DEBUG_FREQ
+	debug_calc_bogomips();
+#endif
+
+	return 0;
+}
+
+/* Switch CPU speed under PMU control
+ */
+static int pmu_set_cpu_speed(int low_speed)
+{
+	struct adb_request req;
+	unsigned long save_l2cr;
+	unsigned long save_l3cr;
+	unsigned int pic_prio;
+	unsigned long flags;
+
+	preempt_disable();
+
+#ifdef DEBUG_FREQ
+	printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+#endif
+	pmu_suspend();
+
+	/* Disable all interrupt sources on openpic */
+ 	pic_prio = mpic_cpu_get_priority();
+	mpic_cpu_set_priority(0xf);
+
+	/* Make sure the decrementer won't interrupt us */
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+	/* Make sure any pending DEC interrupt occurring while we did
+	 * the above didn't re-enable the DEC */
+	mb();
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+	/* We can now disable MSR_EE */
+	local_irq_save(flags);
+
+	/* Giveup the FPU & vec */
+	enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+	/* Save & disable L2 and L3 caches */
+	save_l3cr = _get_L3CR();	/* (returns -1 if not available) */
+	save_l2cr = _get_L2CR();	/* (returns -1 if not available) */
+
+	/* Send the new speed command. My assumption is that this command
+	 * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
+	 */
+	pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
+	while (!req.complete)
+		pmu_poll();
+
+	/* Prepare the northbridge for the speed transition */
+	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
+
+	/* Call low level code to backup CPU state and recover from
+	 * hardware reset
+	 */
+	low_sleep_handler();
+
+	/* Restore the northbridge */
+	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
+
+	/* Restore L2 cache */
+	if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
+ 		_set_L2CR(save_l2cr);
+	/* Restore L3 cache */
+	if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
+ 		_set_L3CR(save_l3cr);
+
+	/* Restore userland MMU context */
+	switch_mmu_context(NULL, current->active_mm);
+
+#ifdef DEBUG_FREQ
+	printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
+#endif
+
+	/* Restore low level PMU operations */
+	pmu_unlock();
+
+	/*
+	 * Restore decrementer; we'll take a decrementer interrupt
+	 * as soon as interrupts are re-enabled and the generic
+	 * clockevents code will reprogram it with the right value.
+	 */
+	set_dec(1);
+
+	/* Restore interrupts */
+ 	mpic_cpu_set_priority(pic_prio);
+
+	/* Let interrupts flow again ... */
+	local_irq_restore(flags);
+
+#ifdef DEBUG_FREQ
+	debug_calc_bogomips();
+#endif
+
+	pmu_resume();
+
+	preempt_enable();
+
+	return 0;
+}
+
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
+		int notify)
+{
+	struct cpufreq_freqs freqs;
+	unsigned long l3cr;
+	static unsigned long prev_l3cr;
+
+	freqs.old = cur_freq;
+	freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	if (notify)
+		cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	if (speed_mode == CPUFREQ_LOW &&
+	    cpu_has_feature(CPU_FTR_L3CR)) {
+		l3cr = _get_L3CR();
+		if (l3cr & L3CR_L3E) {
+			prev_l3cr = l3cr;
+			_set_L3CR(0);
+		}
+	}
+	set_speed_proc(speed_mode == CPUFREQ_LOW);
+	if (speed_mode == CPUFREQ_HIGH &&
+	    cpu_has_feature(CPU_FTR_L3CR)) {
+		l3cr = _get_L3CR();
+		if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
+			_set_L3CR(prev_l3cr);
+	}
+	if (notify)
+		cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+	return 0;
+}
+
+static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
+{
+	return cur_freq;
+}
+
+static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
+}
+
+static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
+					unsigned int target_freq,
+					unsigned int relation)
+{
+	unsigned int    newstate = 0;
+	int		rc;
+
+	if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
+			target_freq, relation, &newstate))
+		return -EINVAL;
+
+	rc = do_set_cpu_speed(policy, newstate, 1);
+
+	ppc_proc_freq = cur_freq * 1000ul;
+	return rc;
+}
+
+static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	policy->cpuinfo.transition_latency	= transition_latency;
+	policy->cur = cur_freq;
+
+	cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
+	return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
+}
+
+static u32 read_gpio(struct device_node *np)
+{
+	const u32 *reg = of_get_property(np, "reg", NULL);
+	u32 offset;
+
+	if (reg == NULL)
+		return 0;
+	/* That works for all keylargos but shall be fixed properly
+	 * some day... The problem is that it seems we can't rely
+	 * on the "reg" property of the GPIO nodes, they are either
+	 * relative to the base of KeyLargo or to the base of the
+	 * GPIO space, and the device-tree doesn't help.
+	 */
+	offset = *reg;
+	if (offset < KEYLARGO_GPIO_LEVELS0)
+		offset += KEYLARGO_GPIO_LEVELS0;
+	return offset;
+}
+
+static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+	/* Ok, this could be made a bit smarter, but let's be robust for now. We
+	 * always force a speed change to high speed before sleep, to make sure
+	 * we have appropriate voltage and/or bus speed for the wakeup process,
+	 * and to make sure our loops_per_jiffies are "good enough", that is will
+	 * not cause too short delays if we sleep in low speed and wake in high
+	 * speed..
+	 */
+	no_schedule = 1;
+	sleep_freq = cur_freq;
+	if (cur_freq == low_freq && !is_pmu_based)
+		do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
+	return 0;
+}
+
+static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	/* If we resume, first check if we have a get() function */
+	if (get_speed_proc)
+		cur_freq = get_speed_proc();
+	else
+		cur_freq = 0;
+
+	/* We don't, hrm... we don't really know our speed here, best
+	 * is that we force a switch to whatever it was, which is
+	 * probably high speed due to our suspend() routine
+	 */
+	do_set_cpu_speed(policy, sleep_freq == low_freq ?
+			 CPUFREQ_LOW : CPUFREQ_HIGH, 0);
+
+	ppc_proc_freq = cur_freq * 1000ul;
+
+	no_schedule = 0;
+	return 0;
+}
+
+static struct cpufreq_driver pmac_cpufreq_driver = {
+	.verify 	= pmac_cpufreq_verify,
+	.target 	= pmac_cpufreq_target,
+	.get		= pmac_cpufreq_get_speed,
+	.init		= pmac_cpufreq_cpu_init,
+	.suspend	= pmac_cpufreq_suspend,
+	.resume		= pmac_cpufreq_resume,
+	.flags		= CPUFREQ_PM_NO_WARN,
+	.attr		= pmac_cpu_freqs_attr,
+	.name		= "powermac",
+	.owner		= THIS_MODULE,
+};
+
+
+static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
+								"voltage-gpio");
+	struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
+								"frequency-gpio");
+	struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
+								     "slewing-done");
+	const u32 *value;
+
+	/*
+	 * Check to see if it's GPIO driven or PMU only
+	 *
+	 * The way we extract the GPIO address is slightly hackish, but it
+	 * works well enough for now. We need to abstract the whole GPIO
+	 * stuff sooner or later anyway
+	 */
+
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+	if (freq_gpio_np)
+		frequency_gpio = read_gpio(freq_gpio_np);
+	if (slew_done_gpio_np)
+		slew_done_gpio = read_gpio(slew_done_gpio_np);
+
+	/* If we use the frequency GPIOs, calculate the min/max speeds based
+	 * on the bus frequencies
+	 */
+	if (frequency_gpio && slew_done_gpio) {
+		int lenp, rc;
+		const u32 *freqs, *ratio;
+
+		freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
+		lenp /= sizeof(u32);
+		if (freqs == NULL || lenp != 2) {
+			printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
+			return 1;
+		}
+		ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
+						NULL);
+		if (ratio == NULL) {
+			printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
+			return 1;
+		}
+
+		/* Get the min/max bus frequencies */
+		low_freq = min(freqs[0], freqs[1]);
+		hi_freq = max(freqs[0], freqs[1]);
+
+		/* Grrrr.. It _seems_ that the device-tree is lying on the low bus
+		 * frequency, it claims it to be around 84Mhz on some models while
+		 * it appears to be approx. 101Mhz on all. Let's hack around here...
+		 * fortunately, we don't need to be too precise
+		 */
+		if (low_freq < 98000000)
+			low_freq = 101000000;
+
+		/* Convert those to CPU core clocks */
+		low_freq = (low_freq * (*ratio)) / 2000;
+		hi_freq = (hi_freq * (*ratio)) / 2000;
+
+		/* Now we get the frequencies, we read the GPIO to see what is out current
+		 * speed
+		 */
+		rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+		cur_freq = (rc & 0x01) ? hi_freq : low_freq;
+
+		set_speed_proc = gpios_set_cpu_speed;
+		return 1;
+	}
+
+	/* If we use the PMU, look for the min & max frequencies in the
+	 * device-tree
+	 */
+	value = of_get_property(cpunode, "min-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	low_freq = (*value) / 1000;
+	/* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
+	 * here */
+	if (low_freq < 100000)
+		low_freq *= 10;
+
+	value = of_get_property(cpunode, "max-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	hi_freq = (*value) / 1000;
+	set_speed_proc = pmu_set_cpu_speed;
+	is_pmu_based = 1;
+
+	return 0;
+}
+
+static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np;
+
+	if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+		return 1;
+
+	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+	if (!voltage_gpio){
+		printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
+		return 1;
+	}
+
+	/* OF only reports the high frequency */
+	hi_freq = cur_freq;
+	low_freq = cur_freq/2;
+
+	/* Read actual frequency from CPU */
+	cur_freq = dfs_get_cpu_speed();
+	set_speed_proc = dfs_set_cpu_speed;
+	get_speed_proc = dfs_get_cpu_speed;
+
+	return 0;
+}
+
+static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
+{
+	struct device_node *volt_gpio_np;
+	u32 pvr;
+	const u32 *value;
+
+	if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+		return 1;
+
+	hi_freq = cur_freq;
+	value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
+	if (!value)
+		return 1;
+	low_freq = (*value) / 1000;
+
+	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+	if (volt_gpio_np)
+		voltage_gpio = read_gpio(volt_gpio_np);
+
+	pvr = mfspr(SPRN_PVR);
+	has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
+
+	set_speed_proc = cpu_750fx_cpu_speed;
+	get_speed_proc = cpu_750fx_get_cpu_speed;
+	cur_freq = cpu_750fx_get_cpu_speed();
+
+	return 0;
+}
+
+/* Currently, we support the following machines:
+ *
+ *  - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
+ *  - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
+ *  - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
+ *  - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
+ *  - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
+ *  - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
+ *  - Recent MacRISC3 laptops
+ *  - All new machines with 7447A CPUs
+ */
+static int __init pmac_cpufreq_setup(void)
+{
+	struct device_node	*cpunode;
+	const u32		*value;
+
+	if (strstr(cmd_line, "nocpufreq"))
+		return 0;
+
+	/* Assume only one CPU */
+	cpunode = of_find_node_by_type(NULL, "cpu");
+	if (!cpunode)
+		goto out;
+
+	/* Get current cpu clock freq */
+	value = of_get_property(cpunode, "clock-frequency", NULL);
+	if (!value)
+		goto out;
+	cur_freq = (*value) / 1000;
+	transition_latency = CPUFREQ_ETERNAL;
+
+	/*  Check for 7447A based MacRISC3 */
+	if (of_machine_is_compatible("MacRISC3") &&
+	    of_get_property(cpunode, "dynamic-power-step", NULL) &&
+	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
+		pmac_cpufreq_init_7447A(cpunode);
+		transition_latency = 8000000;
+	/* Check for other MacRISC3 machines */
+	} else if (of_machine_is_compatible("PowerBook3,4") ||
+		   of_machine_is_compatible("PowerBook3,5") ||
+		   of_machine_is_compatible("MacRISC3")) {
+		pmac_cpufreq_init_MacRISC3(cpunode);
+	/* Else check for iBook2 500/600 */
+	} else if (of_machine_is_compatible("PowerBook4,1")) {
+		hi_freq = cur_freq;
+		low_freq = 400000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for TiPb 550 */
+	else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+		hi_freq = cur_freq;
+		low_freq = 500000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for TiPb 400 & 500 */
+	else if (of_machine_is_compatible("PowerBook3,2")) {
+		/* We only know about the 400 MHz and the 500Mhz model
+		 * they both have 300 MHz as low frequency
+		 */
+		if (cur_freq < 350000 || cur_freq > 550000)
+			goto out;
+		hi_freq = cur_freq;
+		low_freq = 300000;
+		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
+	}
+	/* Else check for 750FX */
+	else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
+		pmac_cpufreq_init_750FX(cpunode);
+out:
+	of_node_put(cpunode);
+	if (set_speed_proc == NULL)
+		return -ENODEV;
+
+	pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
+	pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
+	ppc_proc_freq = cur_freq * 1000ul;
+
+	printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
+	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+	       low_freq/1000, hi_freq/1000, cur_freq/1000);
+
+	return cpufreq_register_driver(&pmac_cpufreq_driver);
+}
+
+module_init(pmac_cpufreq_setup);
+
diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c
new file mode 100644
index 00000000000..7ba423431cf
--- /dev/null
+++ b/drivers/cpufreq/pmac64-cpufreq.c
@@ -0,0 +1,746 @@
+/*
+ *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
+ * that is iMac G5 and latest single CPU desktop.
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/smu.h>
+#include <asm/pmac_pfunc.h>
+
+#define DBG(fmt...) pr_debug(fmt)
+
+/* see 970FX user manual */
+
+#define SCOM_PCR 0x0aa001			/* PCR scom addr */
+
+#define PCR_HILO_SELECT		0x80000000U	/* 1 = PCR, 0 = PCRH */
+#define PCR_SPEED_FULL		0x00000000U	/* 1:1 speed value */
+#define PCR_SPEED_HALF		0x00020000U	/* 1:2 speed value */
+#define PCR_SPEED_QUARTER	0x00040000U	/* 1:4 speed value */
+#define PCR_SPEED_MASK		0x000e0000U	/* speed mask */
+#define PCR_SPEED_SHIFT		17
+#define PCR_FREQ_REQ_VALID	0x00010000U	/* freq request valid */
+#define PCR_VOLT_REQ_VALID	0x00008000U	/* volt request valid */
+#define PCR_TARGET_TIME_MASK	0x00006000U	/* target time */
+#define PCR_STATLAT_MASK	0x00001f00U	/* STATLAT value */
+#define PCR_SNOOPLAT_MASK	0x000000f0U	/* SNOOPLAT value */
+#define PCR_SNOOPACC_MASK	0x0000000fU	/* SNOOPACC value */
+
+#define SCOM_PSR 0x408001			/* PSR scom addr */
+/* warning: PSR is a 64 bits register */
+#define PSR_CMD_RECEIVED	0x2000000000000000U   /* command received */
+#define PSR_CMD_COMPLETED	0x1000000000000000U   /* command completed */
+#define PSR_CUR_SPEED_MASK	0x0300000000000000U   /* current speed */
+#define PSR_CUR_SPEED_SHIFT	(56)
+
+/*
+ * The G5 only supports two frequencies (Quarter speed is not supported)
+ */
+#define CPUFREQ_HIGH                  0
+#define CPUFREQ_LOW                   1
+
+static struct cpufreq_frequency_table g5_cpu_freqs[] = {
+	{CPUFREQ_HIGH, 		0},
+	{CPUFREQ_LOW,		0},
+	{0,			CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* g5_cpu_freqs_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+/* Power mode data is an array of the 32 bits PCR values to use for
+ * the various frequencies, retrieved from the device-tree
+ */
+static int g5_pmode_cur;
+
+static void (*g5_switch_volt)(int speed_mode);
+static int (*g5_switch_freq)(int speed_mode);
+static int (*g5_query_freq)(void);
+
+static DEFINE_MUTEX(g5_switch_mutex);
+
+static unsigned long transition_latency;
+
+#ifdef CONFIG_PMAC_SMU
+
+static const u32 *g5_pmode_data;
+static int g5_pmode_max;
+
+static struct smu_sdbp_fvt *g5_fvt_table;	/* table of op. points */
+static int g5_fvt_count;			/* number of op. points */
+static int g5_fvt_cur;				/* current op. point */
+
+/*
+ * SMU based voltage switching for Neo2 platforms
+ */
+
+static void g5_smu_switch_volt(int speed_mode)
+{
+	struct smu_simple_cmd	cmd;
+
+	DECLARE_COMPLETION_ONSTACK(comp);
+	smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
+			 &comp, 'V', 'S', 'L', 'E', 'W',
+			 0xff, g5_fvt_cur+1, speed_mode);
+	wait_for_completion(&comp);
+}
+
+/*
+ * Platform function based voltage/vdnap switching for Neo2
+ */
+
+static struct pmf_function *pfunc_set_vdnap0;
+static struct pmf_function *pfunc_vdnap0_complete;
+
+static void g5_vdnap_switch_volt(int speed_mode)
+{
+	struct pmf_args args;
+	u32 slew, done = 0;
+	unsigned long timeout;
+
+	slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
+	args.count = 1;
+	args.u[0].p = &slew;
+
+	pmf_call_one(pfunc_set_vdnap0, &args);
+
+	/* It's an irq GPIO so we should be able to just block here,
+	 * I'll do that later after I've properly tested the IRQ code for
+	 * platform functions
+	 */
+	timeout = jiffies + HZ/10;
+	while(!time_after(jiffies, timeout)) {
+		args.count = 1;
+		args.u[0].p = &done;
+		pmf_call_one(pfunc_vdnap0_complete, &args);
+		if (done)
+			break;
+		msleep(1);
+	}
+	if (done == 0)
+		printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+}
+
+
+/*
+ * SCOM based frequency switching for 970FX rev3
+ */
+static int g5_scom_switch_freq(int speed_mode)
+{
+	unsigned long flags;
+	int to;
+
+	/* If frequency is going up, first ramp up the voltage */
+	if (speed_mode < g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	local_irq_save(flags);
+
+	/* Clear PCR high */
+	scom970_write(SCOM_PCR, 0);
+	/* Clear PCR low */
+       	scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
+	/* Set PCR low */
+	scom970_write(SCOM_PCR, PCR_HILO_SELECT |
+		      g5_pmode_data[speed_mode]);
+
+	/* Wait for completion */
+	for (to = 0; to < 10; to++) {
+		unsigned long psr = scom970_read(SCOM_PSR);
+
+		if ((psr & PSR_CMD_RECEIVED) == 0 &&
+		    (((psr >> PSR_CUR_SPEED_SHIFT) ^
+		      (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
+		    == 0)
+			break;
+		if (psr & PSR_CMD_COMPLETED)
+			break;
+		udelay(100);
+	}
+
+	local_irq_restore(flags);
+
+	/* If frequency is going down, last ramp the voltage */
+	if (speed_mode > g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	g5_pmode_cur = speed_mode;
+	ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+	return 0;
+}
+
+static int g5_scom_query_freq(void)
+{
+	unsigned long psr = scom970_read(SCOM_PSR);
+	int i;
+
+	for (i = 0; i <= g5_pmode_max; i++)
+		if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
+		      (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
+			break;
+	return i;
+}
+
+/*
+ * Fake voltage switching for platforms with missing support
+ */
+
+static void g5_dummy_switch_volt(int speed_mode)
+{
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+/*
+ * Platform function based voltage switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu0_volt_high;
+static struct pmf_function *pfunc_cpu0_volt_low;
+static struct pmf_function *pfunc_cpu1_volt_high;
+static struct pmf_function *pfunc_cpu1_volt_low;
+
+static void g5_pfunc_switch_volt(int speed_mode)
+{
+	if (speed_mode == CPUFREQ_HIGH) {
+		if (pfunc_cpu0_volt_high)
+			pmf_call_one(pfunc_cpu0_volt_high, NULL);
+		if (pfunc_cpu1_volt_high)
+			pmf_call_one(pfunc_cpu1_volt_high, NULL);
+	} else {
+		if (pfunc_cpu0_volt_low)
+			pmf_call_one(pfunc_cpu0_volt_low, NULL);
+		if (pfunc_cpu1_volt_low)
+			pmf_call_one(pfunc_cpu1_volt_low, NULL);
+	}
+	msleep(10); /* should be faster , to fix */
+}
+
+/*
+ * Platform function based frequency switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu_setfreq_high;
+static struct pmf_function *pfunc_cpu_setfreq_low;
+static struct pmf_function *pfunc_cpu_getfreq;
+static struct pmf_function *pfunc_slewing_done;
+
+static int g5_pfunc_switch_freq(int speed_mode)
+{
+	struct pmf_args args;
+	u32 done = 0;
+	unsigned long timeout;
+	int rc;
+
+	DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
+
+	/* If frequency is going up, first ramp up the voltage */
+	if (speed_mode < g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	/* Do it */
+	if (speed_mode == CPUFREQ_HIGH)
+		rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
+	else
+		rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+
+	if (rc)
+		printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
+
+	/* It's an irq GPIO so we should be able to just block here,
+	 * I'll do that later after I've properly tested the IRQ code for
+	 * platform functions
+	 */
+	timeout = jiffies + HZ/10;
+	while(!time_after(jiffies, timeout)) {
+		args.count = 1;
+		args.u[0].p = &done;
+		pmf_call_one(pfunc_slewing_done, &args);
+		if (done)
+			break;
+		msleep(1);
+	}
+	if (done == 0)
+		printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+
+	/* If frequency is going down, last ramp the voltage */
+	if (speed_mode > g5_pmode_cur)
+		g5_switch_volt(speed_mode);
+
+	g5_pmode_cur = speed_mode;
+	ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+	return 0;
+}
+
+static int g5_pfunc_query_freq(void)
+{
+	struct pmf_args args;
+	u32 val = 0;
+
+	args.count = 1;
+	args.u[0].p = &val;
+	pmf_call_one(pfunc_cpu_getfreq, &args);
+	return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
+}
+
+
+/*
+ * Common interface to the cpufreq core
+ */
+
+static int g5_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, g5_cpu_freqs);
+}
+
+static int g5_cpufreq_target(struct cpufreq_policy *policy,
+	unsigned int target_freq, unsigned int relation)
+{
+	unsigned int newstate = 0;
+	struct cpufreq_freqs freqs;
+	int rc;
+
+	if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
+			target_freq, relation, &newstate))
+		return -EINVAL;
+
+	if (g5_pmode_cur == newstate)
+		return 0;
+
+	mutex_lock(&g5_switch_mutex);
+
+	freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
+	freqs.new = g5_cpu_freqs[newstate].frequency;
+
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	rc = g5_switch_freq(newstate);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+
+	mutex_unlock(&g5_switch_mutex);
+
+	return rc;
+}
+
+static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
+{
+	return g5_cpu_freqs[g5_pmode_cur].frequency;
+}
+
+static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	policy->cpuinfo.transition_latency = transition_latency;
+	policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
+	/* secondary CPUs are tied to the primary one by the
+	 * cpufreq core if in the secondary policy we tell it that
+	 * it actually must be one policy together with all others. */
+	cpumask_copy(policy->cpus, cpu_online_mask);
+	cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
+
+	return cpufreq_frequency_table_cpuinfo(policy,
+		g5_cpu_freqs);
+}
+
+
+static struct cpufreq_driver g5_cpufreq_driver = {
+	.name		= "powermac",
+	.owner		= THIS_MODULE,
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= g5_cpufreq_cpu_init,
+	.verify		= g5_cpufreq_verify,
+	.target		= g5_cpufreq_target,
+	.get		= g5_cpufreq_get_speed,
+	.attr 		= g5_cpu_freqs_attr,
+};
+
+
+#ifdef CONFIG_PMAC_SMU
+
+static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
+{
+	struct device_node *cpunode;
+	unsigned int psize, ssize;
+	unsigned long max_freq;
+	char *freq_method, *volt_method;
+	const u32 *valp;
+	u32 pvr_hi;
+	int use_volts_vdnap = 0;
+	int use_volts_smu = 0;
+	int rc = -ENODEV;
+
+	/* Check supported platforms */
+	if (of_machine_is_compatible("PowerMac8,1") ||
+	    of_machine_is_compatible("PowerMac8,2") ||
+	    of_machine_is_compatible("PowerMac9,1"))
+		use_volts_smu = 1;
+	else if (of_machine_is_compatible("PowerMac11,2"))
+		use_volts_vdnap = 1;
+	else
+		return -ENODEV;
+
+	/* Get first CPU node */
+	for (cpunode = NULL;
+	     (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
+		const u32 *reg = of_get_property(cpunode, "reg", NULL);
+		if (reg == NULL || (*reg) != 0)
+			continue;
+		if (!strcmp(cpunode->type, "cpu"))
+			break;
+	}
+	if (cpunode == NULL) {
+		printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
+		return -ENODEV;
+	}
+
+	/* Check 970FX for now */
+	valp = of_get_property(cpunode, "cpu-version", NULL);
+	if (!valp) {
+		DBG("No cpu-version property !\n");
+		goto bail_noprops;
+	}
+	pvr_hi = (*valp) >> 16;
+	if (pvr_hi != 0x3c && pvr_hi != 0x44) {
+		printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
+		goto bail_noprops;
+	}
+
+	/* Look for the powertune data in the device-tree */
+	g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
+	if (!g5_pmode_data) {
+		DBG("No power-mode-data !\n");
+		goto bail_noprops;
+	}
+	g5_pmode_max = psize / sizeof(u32) - 1;
+
+	if (use_volts_smu) {
+		const struct smu_sdbp_header *shdr;
+
+		/* Look for the FVT table */
+		shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+		if (!shdr)
+			goto bail_noprops;
+		g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
+		ssize = (shdr->len * sizeof(u32)) -
+			sizeof(struct smu_sdbp_header);
+		g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
+		g5_fvt_cur = 0;
+
+		/* Sanity checking */
+		if (g5_fvt_count < 1 || g5_pmode_max < 1)
+			goto bail_noprops;
+
+		g5_switch_volt = g5_smu_switch_volt;
+		volt_method = "SMU";
+	} else if (use_volts_vdnap) {
+		struct device_node *root;
+
+		root = of_find_node_by_path("/");
+		if (root == NULL) {
+			printk(KERN_ERR "cpufreq: Can't find root of "
+			       "device tree\n");
+			goto bail_noprops;
+		}
+		pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
+		pfunc_vdnap0_complete =
+			pmf_find_function(root, "slewing-done");
+		if (pfunc_set_vdnap0 == NULL ||
+		    pfunc_vdnap0_complete == NULL) {
+			printk(KERN_ERR "cpufreq: Can't find required "
+			       "platform function\n");
+			goto bail_noprops;
+		}
+
+		g5_switch_volt = g5_vdnap_switch_volt;
+		volt_method = "GPIO";
+	} else {
+		g5_switch_volt = g5_dummy_switch_volt;
+		volt_method = "none";
+	}
+
+	/*
+	 * From what I see, clock-frequency is always the maximal frequency.
+	 * The current driver can not slew sysclk yet, so we really only deal
+	 * with powertune steps for now. We also only implement full freq and
+	 * half freq in this version. So far, I haven't yet seen a machine
+	 * supporting anything else.
+	 */
+	valp = of_get_property(cpunode, "clock-frequency", NULL);
+	if (!valp)
+		return -ENODEV;
+	max_freq = (*valp)/1000;
+	g5_cpu_freqs[0].frequency = max_freq;
+	g5_cpu_freqs[1].frequency = max_freq/2;
+
+	/* Set callbacks */
+	transition_latency = 12000;
+	g5_switch_freq = g5_scom_switch_freq;
+	g5_query_freq = g5_scom_query_freq;
+	freq_method = "SCOM";
+
+	/* Force apply current frequency to make sure everything is in
+	 * sync (voltage is right for example). Firmware may leave us with
+	 * a strange setting ...
+	 */
+	g5_switch_volt(CPUFREQ_HIGH);
+	msleep(10);
+	g5_pmode_cur = -1;
+	g5_switch_freq(g5_query_freq());
+
+	printk(KERN_INFO "Registering G5 CPU frequency driver\n");
+	printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
+	       freq_method, volt_method);
+	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+		g5_cpu_freqs[1].frequency/1000,
+		g5_cpu_freqs[0].frequency/1000,
+		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+	rc = cpufreq_register_driver(&g5_cpufreq_driver);
+
+	/* We keep the CPU node on hold... hopefully, Apple G5 don't have
+	 * hotplug CPU with a dynamic device-tree ...
+	 */
+	return rc;
+
+ bail_noprops:
+	of_node_put(cpunode);
+
+	return rc;
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+
+static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
+{
+	struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
+	const u8 *eeprom = NULL;
+	const u32 *valp;
+	u64 max_freq, min_freq, ih, il;
+	int has_volt = 1, rc = 0;
+
+	DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
+	    " RackMac3,1...\n");
+
+	/* Get first CPU node */
+	for (cpunode = NULL;
+	     (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
+		if (!strcmp(cpunode->type, "cpu"))
+			break;
+	}
+	if (cpunode == NULL) {
+		printk(KERN_ERR "cpufreq: Can't find any CPU node\n");
+		return -ENODEV;
+	}
+
+	/* Lookup the cpuid eeprom node */
+        cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
+	if (cpuid != NULL)
+		eeprom = of_get_property(cpuid, "cpuid", NULL);
+	if (eeprom == NULL) {
+		printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	/* Lookup the i2c hwclock */
+	for (hwclock = NULL;
+	     (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
+		const char *loc = of_get_property(hwclock,
+				"hwctrl-location", NULL);
+		if (loc == NULL)
+			continue;
+		if (strcmp(loc, "CPU CLOCK"))
+			continue;
+		if (!of_get_property(hwclock, "platform-get-frequency", NULL))
+			continue;
+		break;
+	}
+	if (hwclock == NULL) {
+		printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name);
+
+	/* Now get all the platform functions */
+	pfunc_cpu_getfreq =
+		pmf_find_function(hwclock, "get-frequency");
+	pfunc_cpu_setfreq_high =
+		pmf_find_function(hwclock, "set-frequency-high");
+	pfunc_cpu_setfreq_low =
+		pmf_find_function(hwclock, "set-frequency-low");
+	pfunc_slewing_done =
+		pmf_find_function(hwclock, "slewing-done");
+	pfunc_cpu0_volt_high =
+		pmf_find_function(hwclock, "set-voltage-high-0");
+	pfunc_cpu0_volt_low =
+		pmf_find_function(hwclock, "set-voltage-low-0");
+	pfunc_cpu1_volt_high =
+		pmf_find_function(hwclock, "set-voltage-high-1");
+	pfunc_cpu1_volt_low =
+		pmf_find_function(hwclock, "set-voltage-low-1");
+
+	/* Check we have minimum requirements */
+	if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
+	    pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
+		printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	/* Check that we have complete sets */
+	if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
+		pmf_put_function(pfunc_cpu0_volt_high);
+		pmf_put_function(pfunc_cpu0_volt_low);
+		pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
+		has_volt = 0;
+	}
+	if (!has_volt ||
+	    pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
+		pmf_put_function(pfunc_cpu1_volt_high);
+		pmf_put_function(pfunc_cpu1_volt_low);
+		pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
+	}
+
+	/* Note: The device tree also contains a "platform-set-values"
+	 * function for which I haven't quite figured out the usage. It
+	 * might have to be called on init and/or wakeup, I'm not too sure
+	 * but things seem to work fine without it so far ...
+	 */
+
+	/* Get max frequency from device-tree */
+	valp = of_get_property(cpunode, "clock-frequency", NULL);
+	if (!valp) {
+		printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	max_freq = (*valp)/1000;
+
+	/* Now calculate reduced frequency by using the cpuid input freq
+	 * ratio. This requires 64 bits math unless we are willing to lose
+	 * some precision
+	 */
+	ih = *((u32 *)(eeprom + 0x10));
+	il = *((u32 *)(eeprom + 0x20));
+
+	/* Check for machines with no useful settings */
+	if (il == ih) {
+		printk(KERN_WARNING "cpufreq: No low frequency mode available"
+		       " on this model !\n");
+		rc = -ENODEV;
+		goto bail;
+	}
+
+	min_freq = 0;
+	if (ih != 0 && il != 0)
+		min_freq = (max_freq * il) / ih;
+
+	/* Sanity check */
+	if (min_freq >= max_freq || min_freq < 1000) {
+		printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
+		rc = -ENXIO;
+		goto bail;
+	}
+	g5_cpu_freqs[0].frequency = max_freq;
+	g5_cpu_freqs[1].frequency = min_freq;
+
+	/* Set callbacks */
+	transition_latency = CPUFREQ_ETERNAL;
+	g5_switch_volt = g5_pfunc_switch_volt;
+	g5_switch_freq = g5_pfunc_switch_freq;
+	g5_query_freq = g5_pfunc_query_freq;
+
+	/* Force apply current frequency to make sure everything is in
+	 * sync (voltage is right for example). Firmware may leave us with
+	 * a strange setting ...
+	 */
+	g5_switch_volt(CPUFREQ_HIGH);
+	msleep(10);
+	g5_pmode_cur = -1;
+	g5_switch_freq(g5_query_freq());
+
+	printk(KERN_INFO "Registering G5 CPU frequency driver\n");
+	printk(KERN_INFO "Frequency method: i2c/pfunc, "
+	       "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
+	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+		g5_cpu_freqs[1].frequency/1000,
+		g5_cpu_freqs[0].frequency/1000,
+		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+	rc = cpufreq_register_driver(&g5_cpufreq_driver);
+ bail:
+	if (rc != 0) {
+		pmf_put_function(pfunc_cpu_getfreq);
+		pmf_put_function(pfunc_cpu_setfreq_high);
+		pmf_put_function(pfunc_cpu_setfreq_low);
+		pmf_put_function(pfunc_slewing_done);
+		pmf_put_function(pfunc_cpu0_volt_high);
+		pmf_put_function(pfunc_cpu0_volt_low);
+		pmf_put_function(pfunc_cpu1_volt_high);
+		pmf_put_function(pfunc_cpu1_volt_low);
+	}
+	of_node_put(hwclock);
+	of_node_put(cpuid);
+	of_node_put(cpunode);
+
+	return rc;
+}
+
+static int __init g5_cpufreq_init(void)
+{
+	struct device_node *cpus;
+	int rc = 0;
+
+	cpus = of_find_node_by_path("/cpus");
+	if (cpus == NULL) {
+		DBG("No /cpus node !\n");
+		return -ENODEV;
+	}
+
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
+		rc = g5_pm72_cpufreq_init(cpus);
+#ifdef CONFIG_PMAC_SMU
+	else
+		rc = g5_neo2_cpufreq_init(cpus);
+#endif /* CONFIG_PMAC_SMU */
+
+	of_node_put(cpus);
+	return rc;
+}
+
+module_init(g5_cpufreq_init);
+
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index ea0222a45b7..ea8e10382ec 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -58,7 +58,7 @@ static int powernow_k6_get_cpu_multiplier(void)
 	msrval = POWERNOW_IOPORT + 0x0;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
 
-	return clock_ratio[(invalue >> 5)&7].index;
+	return clock_ratio[(invalue >> 5)&7].driver_data;
 }
 
 
@@ -75,13 +75,13 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy,
 	unsigned long msrval;
 	struct cpufreq_freqs freqs;
 
-	if (clock_ratio[best_i].index > max_multiplier) {
+	if (clock_ratio[best_i].driver_data > max_multiplier) {
 		printk(KERN_ERR PFX "invalid target frequency\n");
 		return;
 	}
 
 	freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
-	freqs.new = busfreq * clock_ratio[best_i].index;
+	freqs.new = busfreq * clock_ratio[best_i].driver_data;
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
@@ -156,7 +156,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 
 	/* table init */
 	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
-		f = clock_ratio[i].index;
+		f = clock_ratio[i].driver_data;
 		if (f > max_multiplier)
 			clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
index 53888dacbe5..b9f80b713fd 100644
--- a/drivers/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -186,7 +186,7 @@ static int get_ranges(unsigned char *pst)
 		fid = *pst++;
 
 		powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
-		powernow_table[j].index = fid; /* lower 8 bits */
+		powernow_table[j].driver_data = fid; /* lower 8 bits */
 
 		speed = powernow_table[j].frequency;
 
@@ -203,7 +203,7 @@ static int get_ranges(unsigned char *pst)
 			maximum_speed = speed;
 
 		vid = *pst++;
-		powernow_table[j].index |= (vid << 8); /* upper 8 bits */
+		powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */
 
 		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
@@ -212,7 +212,7 @@ static int get_ranges(unsigned char *pst)
 			 mobile_vid_table[vid]%1000);
 	}
 	powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
-	powernow_table[number_scales].index = 0;
+	powernow_table[number_scales].driver_data = 0;
 
 	return 0;
 }
@@ -260,8 +260,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index)
 	 * vid are the upper 8 bits.
 	 */
 
-	fid = powernow_table[index].index & 0xFF;
-	vid = (powernow_table[index].index & 0xFF00) >> 8;
+	fid = powernow_table[index].driver_data & 0xFF;
+	vid = (powernow_table[index].driver_data & 0xFF00) >> 8;
 
 	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 	cfid = fidvidstatus.bits.CFID;
@@ -373,8 +373,8 @@ static int powernow_acpi_init(void)
 		fid = pc.bits.fid;
 
 		powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
-		powernow_table[i].index = fid; /* lower 8 bits */
-		powernow_table[i].index |= (vid << 8); /* upper 8 bits */
+		powernow_table[i].driver_data = fid; /* lower 8 bits */
+		powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */
 
 		speed = powernow_table[i].frequency;
 		speed_mhz = speed / 1000;
@@ -417,7 +417,7 @@ static int powernow_acpi_init(void)
 	}
 
 	powernow_table[i].frequency = CPUFREQ_TABLE_END;
-	powernow_table[i].index = 0;
+	powernow_table[i].driver_data = 0;
 
 	/* notify BIOS that we exist */
 	acpi_processor_notify_smm(THIS_MODULE);
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index b828efe4b2f..78f018f2a5d 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -584,9 +584,9 @@ static void print_basics(struct powernow_k8_data *data)
 				CPUFREQ_ENTRY_INVALID) {
 				printk(KERN_INFO PFX
 					"fid 0x%x (%d MHz), vid 0x%x\n",
-					data->powernow_table[j].index & 0xff,
+					data->powernow_table[j].driver_data & 0xff,
 					data->powernow_table[j].frequency/1000,
-					data->powernow_table[j].index >> 8);
+					data->powernow_table[j].driver_data >> 8);
 		}
 	}
 	if (data->batps)
@@ -632,13 +632,13 @@ static int fill_powernow_table(struct powernow_k8_data *data,
 
 	for (j = 0; j < data->numps; j++) {
 		int freq;
-		powernow_table[j].index = pst[j].fid; /* lower 8 bits */
-		powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
+		powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */
+		powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */
 		freq = find_khz_freq_from_fid(pst[j].fid);
 		powernow_table[j].frequency = freq;
 	}
 	powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
-	powernow_table[data->numps].index = 0;
+	powernow_table[data->numps].driver_data = 0;
 
 	if (query_current_values_with_pending_wait(data)) {
 		kfree(powernow_table);
@@ -810,7 +810,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 
 	powernow_table[data->acpi_data.state_count].frequency =
 		CPUFREQ_TABLE_END;
-	powernow_table[data->acpi_data.state_count].index = 0;
+	powernow_table[data->acpi_data.state_count].driver_data = 0;
 	data->powernow_table = powernow_table;
 
 	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
@@ -865,7 +865,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		pr_debug("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
 
 		index = fid | (vid<<8);
-		powernow_table[i].index = index;
+		powernow_table[i].driver_data = index;
 
 		freq = find_khz_freq_from_fid(fid);
 		powernow_table[i].frequency = freq;
@@ -941,8 +941,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 	 * the cpufreq frequency table in find_psb_table, vid
 	 * are the upper 8 bits.
 	 */
-	fid = data->powernow_table[index].index & 0xFF;
-	vid = (data->powernow_table[index].index & 0xFF00) >> 8;
+	fid = data->powernow_table[index].driver_data & 0xFF;
+	vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8;
 
 	pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
 
@@ -967,9 +967,9 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 
 	res = transition_fid_vid(data, fid, vid);
 	if (res)
-		return res;
-
-	freqs.new = find_khz_freq_from_fid(data->currfid);
+		freqs.new = freqs.old;
+	else
+		freqs.new = find_khz_freq_from_fid(data->currfid);
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	return res;
diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c
new file mode 100644
index 00000000000..3cae4529f95
--- /dev/null
+++ b/drivers/cpufreq/ppc-corenet-cpufreq.c
@@ -0,0 +1,380 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * CPU Frequency Scaling driver for Freescale PowerPC corenet SoCs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/errno.h>
+#include <sysdev/fsl_soc.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+
+/**
+ * struct cpu_data - per CPU data struct
+ * @clk: the clk of CPU
+ * @parent: the parent node of cpu clock
+ * @table: frequency table
+ */
+struct cpu_data {
+	struct clk *clk;
+	struct device_node *parent;
+	struct cpufreq_frequency_table *table;
+};
+
+/**
+ * struct soc_data - SoC specific data
+ * @freq_mask: mask the disallowed frequencies
+ * @flag: unique flags
+ */
+struct soc_data {
+	u32 freq_mask[4];
+	u32 flag;
+};
+
+#define FREQ_MASK	1
+/* see hardware specification for the allowed frqeuencies */
+static const struct soc_data sdata[] = {
+	{ /* used by p2041 and p3041 */
+		.freq_mask = {0x8, 0x8, 0x2, 0x2},
+		.flag = FREQ_MASK,
+	},
+	{ /* used by p5020 */
+		.freq_mask = {0x8, 0x2},
+		.flag = FREQ_MASK,
+	},
+	{ /* used by p4080, p5040 */
+		.freq_mask = {0},
+		.flag = 0,
+	},
+};
+
+/*
+ * the minimum allowed core frequency, in Hz
+ * for chassis v1.0, >= platform frequency
+ * for chassis v2.0, >= platform frequency / 2
+ */
+static u32 min_cpufreq;
+static const u32 *fmask;
+
+/* serialize frequency changes  */
+static DEFINE_MUTEX(cpufreq_lock);
+static DEFINE_PER_CPU(struct cpu_data *, cpu_data);
+
+/* cpumask in a cluster */
+static DEFINE_PER_CPU(cpumask_var_t, cpu_mask);
+
+#ifndef CONFIG_SMP
+static inline const struct cpumask *cpu_core_mask(int cpu)
+{
+	return cpumask_of(0);
+}
+#endif
+
+static unsigned int corenet_cpufreq_get_speed(unsigned int cpu)
+{
+	struct cpu_data *data = per_cpu(cpu_data, cpu);
+
+	return clk_get_rate(data->clk) / 1000;
+}
+
+/* reduce the duplicated frequencies in frequency table */
+static void freq_table_redup(struct cpufreq_frequency_table *freq_table,
+		int count)
+{
+	int i, j;
+
+	for (i = 1; i < count; i++) {
+		for (j = 0; j < i; j++) {
+			if (freq_table[j].frequency == CPUFREQ_ENTRY_INVALID ||
+					freq_table[j].frequency !=
+					freq_table[i].frequency)
+				continue;
+
+			freq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			break;
+		}
+	}
+}
+
+/* sort the frequencies in frequency table in descenting order */
+static void freq_table_sort(struct cpufreq_frequency_table *freq_table,
+		int count)
+{
+	int i, j, ind;
+	unsigned int freq, max_freq;
+	struct cpufreq_frequency_table table;
+	for (i = 0; i < count - 1; i++) {
+		max_freq = freq_table[i].frequency;
+		ind = i;
+		for (j = i + 1; j < count; j++) {
+			freq = freq_table[j].frequency;
+			if (freq == CPUFREQ_ENTRY_INVALID ||
+					freq <= max_freq)
+				continue;
+			ind = j;
+			max_freq = freq;
+		}
+
+		if (ind != i) {
+			/* exchange the frequencies */
+			table.driver_data = freq_table[i].driver_data;
+			table.frequency = freq_table[i].frequency;
+			freq_table[i].driver_data = freq_table[ind].driver_data;
+			freq_table[i].frequency = freq_table[ind].frequency;
+			freq_table[ind].driver_data = table.driver_data;
+			freq_table[ind].frequency = table.frequency;
+		}
+	}
+}
+
+static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct device_node *np;
+	int i, count, ret;
+	u32 freq, mask;
+	struct clk *clk;
+	struct cpufreq_frequency_table *table;
+	struct cpu_data *data;
+	unsigned int cpu = policy->cpu;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		pr_err("%s: no memory\n", __func__);
+		goto err_np;
+	}
+
+	data->clk = of_clk_get(np, 0);
+	if (IS_ERR(data->clk)) {
+		pr_err("%s: no clock information\n", __func__);
+		goto err_nomem2;
+	}
+
+	data->parent = of_parse_phandle(np, "clocks", 0);
+	if (!data->parent) {
+		pr_err("%s: could not get clock information\n", __func__);
+		goto err_nomem2;
+	}
+
+	count = of_property_count_strings(data->parent, "clock-names");
+	table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL);
+	if (!table) {
+		pr_err("%s: no memory\n", __func__);
+		goto err_node;
+	}
+
+	if (fmask)
+		mask = fmask[get_hard_smp_processor_id(cpu)];
+	else
+		mask = 0x0;
+
+	for (i = 0; i < count; i++) {
+		clk = of_clk_get(data->parent, i);
+		freq = clk_get_rate(clk);
+		/*
+		 * the clock is valid if its frequency is not masked
+		 * and large than minimum allowed frequency.
+		 */
+		if (freq < min_cpufreq || (mask & (1 << i)))
+			table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			table[i].frequency = freq / 1000;
+		table[i].driver_data = i;
+	}
+	freq_table_redup(table, count);
+	freq_table_sort(table, count);
+	table[i].frequency = CPUFREQ_TABLE_END;
+
+	/* set the min and max frequency properly */
+	ret = cpufreq_frequency_table_cpuinfo(policy, table);
+	if (ret) {
+		pr_err("invalid frequency table: %d\n", ret);
+		goto err_nomem1;
+	}
+
+	data->table = table;
+	per_cpu(cpu_data, cpu) = data;
+
+	/* update ->cpus if we have cluster, no harm if not */
+	cpumask_copy(policy->cpus, per_cpu(cpu_mask, cpu));
+	for_each_cpu(i, per_cpu(cpu_mask, cpu))
+		per_cpu(cpu_data, i) = data;
+
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = corenet_cpufreq_get_speed(policy->cpu);
+
+	cpufreq_frequency_table_get_attr(table, cpu);
+	of_node_put(np);
+
+	return 0;
+
+err_nomem1:
+	kfree(table);
+err_node:
+	of_node_put(data->parent);
+err_nomem2:
+	per_cpu(cpu_data, cpu) = NULL;
+	kfree(data);
+err_np:
+	of_node_put(np);
+
+	return -ENODEV;
+}
+
+static int __exit corenet_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	struct cpu_data *data = per_cpu(cpu_data, policy->cpu);
+	unsigned int cpu;
+
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	of_node_put(data->parent);
+	kfree(data->table);
+	kfree(data);
+
+	for_each_cpu(cpu, per_cpu(cpu_mask, policy->cpu))
+		per_cpu(cpu_data, cpu) = NULL;
+
+	return 0;
+}
+
+static int corenet_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *table =
+		per_cpu(cpu_data, policy->cpu)->table;
+
+	return cpufreq_frequency_table_verify(policy, table);
+}
+
+static int corenet_cpufreq_target(struct cpufreq_policy *policy,
+		unsigned int target_freq, unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	unsigned int new;
+	struct clk *parent;
+	int ret;
+	struct cpu_data *data = per_cpu(cpu_data, policy->cpu);
+
+	cpufreq_frequency_table_target(policy, data->table,
+			target_freq, relation, &new);
+
+	if (policy->cur == data->table[new].frequency)
+		return 0;
+
+	freqs.old = policy->cur;
+	freqs.new = data->table[new].frequency;
+
+	mutex_lock(&cpufreq_lock);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+
+	parent = of_clk_get(data->parent, data->table[new].driver_data);
+	ret = clk_set_parent(data->clk, parent);
+	if (ret)
+		freqs.new = freqs.old;
+
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	mutex_unlock(&cpufreq_lock);
+
+	return ret;
+}
+
+static struct freq_attr *corenet_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver ppc_corenet_cpufreq_driver = {
+	.name		= "ppc_cpufreq",
+	.owner		= THIS_MODULE,
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= corenet_cpufreq_cpu_init,
+	.exit		= __exit_p(corenet_cpufreq_cpu_exit),
+	.verify		= corenet_cpufreq_verify,
+	.target		= corenet_cpufreq_target,
+	.get		= corenet_cpufreq_get_speed,
+	.attr		= corenet_cpufreq_attr,
+};
+
+static const struct of_device_id node_matches[] __initdata = {
+	{ .compatible = "fsl,p2041-clockgen", .data = &sdata[0], },
+	{ .compatible = "fsl,p3041-clockgen", .data = &sdata[0], },
+	{ .compatible = "fsl,p5020-clockgen", .data = &sdata[1], },
+	{ .compatible = "fsl,p4080-clockgen", .data = &sdata[2], },
+	{ .compatible = "fsl,p5040-clockgen", .data = &sdata[2], },
+	{ .compatible = "fsl,qoriq-clockgen-2.0", },
+	{}
+};
+
+static int __init ppc_corenet_cpufreq_init(void)
+{
+	int ret;
+	struct device_node  *np;
+	const struct of_device_id *match;
+	const struct soc_data *data;
+	unsigned int cpu;
+
+	np = of_find_matching_node(NULL, node_matches);
+	if (!np)
+		return -ENODEV;
+
+	for_each_possible_cpu(cpu) {
+		if (!alloc_cpumask_var(&per_cpu(cpu_mask, cpu), GFP_KERNEL))
+			goto err_mask;
+		cpumask_copy(per_cpu(cpu_mask, cpu), cpu_core_mask(cpu));
+	}
+
+	match = of_match_node(node_matches, np);
+	data = match->data;
+	if (data) {
+		if (data->flag)
+			fmask = data->freq_mask;
+		min_cpufreq = fsl_get_sys_freq();
+	} else {
+		min_cpufreq = fsl_get_sys_freq() / 2;
+	}
+
+	of_node_put(np);
+
+	ret = cpufreq_register_driver(&ppc_corenet_cpufreq_driver);
+	if (!ret)
+		pr_info("Freescale PowerPC corenet CPU frequency scaling driver\n");
+
+	return ret;
+
+err_mask:
+	for_each_possible_cpu(cpu)
+		free_cpumask_var(per_cpu(cpu_mask, cpu));
+
+	return -ENOMEM;
+}
+module_init(ppc_corenet_cpufreq_init);
+
+static void __exit ppc_corenet_cpufreq_exit(void)
+{
+	unsigned int cpu;
+
+	for_each_possible_cpu(cpu)
+		free_cpumask_var(per_cpu(cpu_mask, cpu));
+
+	cpufreq_unregister_driver(&ppc_corenet_cpufreq_driver);
+}
+module_exit(ppc_corenet_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>");
+MODULE_DESCRIPTION("cpufreq driver for Freescale e500mc series SoCs");
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c
index e577a1dbbfc..5936f8d6f2c 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.c
@@ -106,7 +106,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	/* initialize frequency table */
 	for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
-		cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index;
+		cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data;
 		pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
 	}
 
@@ -165,7 +165,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy,
 		 "1/%d of max frequency\n",
 		 policy->cpu,
 		 cbe_freqs[cbe_pmode_new].frequency,
-		 cbe_freqs[cbe_pmode_new].index);
+		 cbe_freqs[cbe_pmode_new].driver_data);
 
 	rc = set_pmode(policy->cpu, cbe_pmode_new);
 
diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c
index 9e5bc8e388a..fb3981ac829 100644
--- a/drivers/cpufreq/pxa2xx-cpufreq.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -420,7 +420,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	/* Generate pxa25x the run cpufreq_frequency_table struct */
 	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
 		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
-		pxa255_run_freq_table[i].index = i;
+		pxa255_run_freq_table[i].driver_data = i;
 	}
 	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
@@ -428,7 +428,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
 		pxa255_turbo_freq_table[i].frequency =
 			pxa255_turbo_freqs[i].khz;
-		pxa255_turbo_freq_table[i].index = i;
+		pxa255_turbo_freq_table[i].driver_data = i;
 	}
 	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
@@ -440,9 +440,9 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 		if (freq > pxa27x_maxfreq)
 			break;
 		pxa27x_freq_table[i].frequency = freq;
-		pxa27x_freq_table[i].index = i;
+		pxa27x_freq_table[i].driver_data = i;
 	}
-	pxa27x_freq_table[i].index = i;
+	pxa27x_freq_table[i].driver_data = i;
 	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	/*
diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c
index 15d60f857ad..9c92ef032a9 100644
--- a/drivers/cpufreq/pxa3xx-cpufreq.c
+++ b/drivers/cpufreq/pxa3xx-cpufreq.c
@@ -98,10 +98,10 @@ static int setup_freqs_table(struct cpufreq_policy *policy,
 		return -ENOMEM;
 
 	for (i = 0; i < num; i++) {
-		table[i].index = i;
+		table[i].driver_data = i;
 		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
 	}
-	table[num].index = i;
+	table[num].driver_data = i;
 	table[num].frequency = CPUFREQ_TABLE_END;
 
 	pxa3xx_freqs = freqs;
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
index 4f1881eee3f..e35865af96e 100644
--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -244,7 +244,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
 	if (ret != 0)
 		goto out;
 
-	idx = s3c_freq->freq_table[i].index;
+	idx = s3c_freq->freq_table[i].driver_data;
 
 	if (idx == SOURCE_HCLK)
 		to_dvs = 1;
@@ -312,7 +312,7 @@ static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
 		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 			continue;
 
-		dvfs = &s3c2416_dvfs_table[freq->index];
+		dvfs = &s3c2416_dvfs_table[freq->driver_data];
 		found = 0;
 
 		/* Check only the min-voltage, more is always ok on S3C2416 */
@@ -462,7 +462,7 @@ static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
 	freq = s3c_freq->freq_table;
 	while (freq->frequency != CPUFREQ_TABLE_END) {
 		/* special handling for dvs mode */
-		if (freq->index == 0) {
+		if (freq->driver_data == 0) {
 			if (!s3c_freq->hclk) {
 				pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
 					 freq->frequency);
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index 27cacb52479..13bb4bae64e 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -87,7 +87,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 	freqs.old = clk_get_rate(armclk) / 1000;
 	freqs.new = s3c64xx_freq_table[i].frequency;
 	freqs.flags = 0;
-	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
+	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].driver_data];
 
 	if (freqs.old == freqs.new)
 		return 0;
@@ -104,7 +104,8 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 		if (ret != 0) {
 			pr_err("Failed to set VDDARM for %dkHz: %d\n",
 			       freqs.new, ret);
-			goto err;
+			freqs.new = freqs.old;
+			goto post_notify;
 		}
 	}
 #endif
@@ -113,10 +114,13 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 	if (ret < 0) {
 		pr_err("Failed to set rate %dkHz: %d\n",
 		       freqs.new, ret);
-		goto err;
+		freqs.new = freqs.old;
 	}
 
+post_notify:
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	if (ret)
+		goto err;
 
 #ifdef CONFIG_REGULATOR
 	if (vddarm && freqs.new < freqs.old) {
diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c
index f740b134d27..77a210975fc 100644
--- a/drivers/cpufreq/sc520_freq.c
+++ b/drivers/cpufreq/sc520_freq.c
@@ -71,7 +71,7 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy,
 	local_irq_disable();
 
 	clockspeed_reg = *cpuctl & ~0x03;
-	*cpuctl = clockspeed_reg | sc520_freq_table[state].index;
+	*cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data;
 
 	local_irq_enable();
 
diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c
index 306ae462bba..93061a40877 100644
--- a/drivers/cpufreq/sparc-us2e-cpufreq.c
+++ b/drivers/cpufreq/sparc-us2e-cpufreq.c
@@ -308,17 +308,17 @@ static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy)
 	struct cpufreq_frequency_table *table =
 		&us2e_freq_table[cpu].table[0];
 
-	table[0].index = 0;
+	table[0].driver_data = 0;
 	table[0].frequency = clock_tick / 1;
-	table[1].index = 1;
+	table[1].driver_data = 1;
 	table[1].frequency = clock_tick / 2;
-	table[2].index = 2;
+	table[2].driver_data = 2;
 	table[2].frequency = clock_tick / 4;
-	table[2].index = 3;
+	table[2].driver_data = 3;
 	table[2].frequency = clock_tick / 6;
-	table[2].index = 4;
+	table[2].driver_data = 4;
 	table[2].frequency = clock_tick / 8;
-	table[2].index = 5;
+	table[2].driver_data = 5;
 	table[3].frequency = CPUFREQ_TABLE_END;
 
 	policy->cpuinfo.transition_latency = 0;
diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c
index c71ee142347..880ee293d61 100644
--- a/drivers/cpufreq/sparc-us3-cpufreq.c
+++ b/drivers/cpufreq/sparc-us3-cpufreq.c
@@ -169,13 +169,13 @@ static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
 	struct cpufreq_frequency_table *table =
 		&us3_freq_table[cpu].table[0];
 
-	table[0].index = 0;
+	table[0].driver_data = 0;
 	table[0].frequency = clock_tick / 1;
-	table[1].index = 1;
+	table[1].driver_data = 1;
 	table[1].frequency = clock_tick / 2;
-	table[2].index = 2;
+	table[2].driver_data = 2;
 	table[2].frequency = clock_tick / 32;
-	table[3].index = 0;
+	table[3].driver_data = 0;
 	table[3].frequency = CPUFREQ_TABLE_END;
 
 	policy->cpuinfo.transition_latency = 0;
diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c
index 156829f4576..c3efa7f2a90 100644
--- a/drivers/cpufreq/spear-cpufreq.c
+++ b/drivers/cpufreq/spear-cpufreq.c
@@ -250,11 +250,11 @@ static int spear_cpufreq_driver_init(void)
 	}
 
 	for (i = 0; i < cnt; i++) {
-		freq_tbl[i].index = i;
+		freq_tbl[i].driver_data = i;
 		freq_tbl[i].frequency = be32_to_cpup(val++);
 	}
 
-	freq_tbl[i].index = i;
+	freq_tbl[i].driver_data = i;
 	freq_tbl[i].frequency = CPUFREQ_TABLE_END;
 
 	spear_cpufreq.freq_tbl = freq_tbl;
diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c
index 618e6f417b1..0915e712fbd 100644
--- a/drivers/cpufreq/speedstep-centrino.c
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -79,11 +79,11 @@ static struct cpufreq_driver centrino_driver;
 
 /* Computes the correct form for IA32_PERF_CTL MSR for a particular
    frequency/voltage operating point; frequency in MHz, volts in mV.
-   This is stored as "index" in the structure. */
+   This is stored as "driver_data" in the structure. */
 #define OP(mhz, mv)							\
 	{								\
 		.frequency = (mhz) * 1000,				\
-		.index = (((mhz)/100) << 8) | ((mv - 700) / 16)		\
+		.driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16)		\
 	}
 
 /*
@@ -307,7 +307,7 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
 		per_cpu(centrino_model, cpu)->op_points[i].frequency
 							!= CPUFREQ_TABLE_END;
 	     i++) {
-		if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
+		if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data)
 			return per_cpu(centrino_model, cpu)->
 							op_points[i].frequency;
 	}
@@ -501,7 +501,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
+		msr = per_cpu(centrino_model, cpu)->op_points[newstate].driver_data;
 
 		if (first_cpu) {
 			rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index c74c0e130ef..cd66b85d927 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -28,17 +28,16 @@
 #include <linux/io.h>
 #include <linux/suspend.h>
 
-/* Frequency table index must be sequential starting at 0 */
 static struct cpufreq_frequency_table freq_table[] = {
-	{ 0, 216000 },
-	{ 1, 312000 },
-	{ 2, 456000 },
-	{ 3, 608000 },
-	{ 4, 760000 },
-	{ 5, 816000 },
-	{ 6, 912000 },
-	{ 7, 1000000 },
-	{ 8, CPUFREQ_TABLE_END },
+	{ .frequency = 216000 },
+	{ .frequency = 312000 },
+	{ .frequency = 456000 },
+	{ .frequency = 608000 },
+	{ .frequency = 760000 },
+	{ .frequency = 816000 },
+	{ .frequency = 912000 },
+	{ .frequency = 1000000 },
+	{ .frequency = CPUFREQ_TABLE_END },
 };
 
 #define NUM_CPUS	2
@@ -138,12 +137,12 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
 	if (ret) {
 		pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
 			freqs.new);
-		return ret;
+		freqs.new = freqs.old;
 	}
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
-	return 0;
+	return ret;
 }
 
 static unsigned long tegra_cpu_highest_speed(void)