diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-26 16:54:27 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-26 16:54:27 -0800 |
commit | 64d497f55379b1e320a08ec2426468d96f5642ec (patch) | |
tree | 22b9ab3c5e69c5cc2728cbc2ca7fc7623beef8f1 /drivers/clocksource | |
parent | 37d4008484977f60d5d37499a2670c79b214dd46 (diff) | |
parent | b5f5fe80fa98a60daa0fa94512d1599b1e26674c (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
sh: remove dead LED code for migo-r and ms7724se
sh: ecovec build fix for CONFIG_I2C=n
sh: ecovec r-standby support
sh: ms7724se r-standby support
sh: SH-Mobile R-standby register save/restore
clocksource: Fix up a registration/IRQ race in the sh drivers.
sh: ms7724: modify scan_timing for KEYSC
sh: ms7724: Add sh_sir support
sh: mach-ecovec24: Add sh_sir support
sh: wire up SET/GET_UNALIGN_CTL.
sh: allow alignment fault mode to be configured at kernel boot.
sh: sh7724: Update FSI/SPU2 clock
sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
sh: add sh7724 kick callback to clk_div4_table
sh: introduce struct clk_div4_table
sh: clock-cpg div4 set_rate() shift fix
sh: Turn on speculative return for SH7785 and SH7786
sh: Merge legacy and dynamic PMB modes.
sh: Use uncached I/O helpers in PMB setup.
sh: Provide uncached I/O helpers.
...
Diffstat (limited to 'drivers/clocksource')
-rw-r--r-- | drivers/clocksource/sh_cmt.c | 32 | ||||
-rw-r--r-- | drivers/clocksource/sh_mtu2.c | 6 | ||||
-rw-r--r-- | drivers/clocksource/sh_tmu.c | 6 |
3 files changed, 25 insertions, 19 deletions
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 6b3e0c2f33e..6fe4f770118 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -603,18 +603,13 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) p->irqaction.handler = sh_cmt_interrupt; p->irqaction.dev_id = p; p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL; - ret = setup_irq(irq, &p->irqaction); - if (ret) { - pr_err("sh_cmt: failed to request irq %d\n", irq); - goto err1; - } /* get hold of clock */ p->clk = clk_get(&p->pdev->dev, cfg->clk); if (IS_ERR(p->clk)) { pr_err("sh_cmt: cannot get clock \"%s\"\n", cfg->clk); ret = PTR_ERR(p->clk); - goto err2; + goto err1; } if (resource_size(res) == 6) { @@ -627,14 +622,25 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) p->clear_bits = ~0xc000; } - return sh_cmt_register(p, cfg->name, - cfg->clockevent_rating, - cfg->clocksource_rating); - err2: - remove_irq(irq, &p->irqaction); - err1: + ret = sh_cmt_register(p, cfg->name, + cfg->clockevent_rating, + cfg->clocksource_rating); + if (ret) { + pr_err("sh_cmt: registration failed\n"); + goto err1; + } + + ret = setup_irq(irq, &p->irqaction); + if (ret) { + pr_err("sh_cmt: failed to request irq %d\n", irq); + goto err1; + } + + return 0; + +err1: iounmap(p->mapbase); - err0: +err0: return ret; } diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 973e714d605..4c8a759e60c 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -221,15 +221,15 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p, ced->cpumask = cpumask_of(0); ced->set_mode = sh_mtu2_clock_event_mode; + pr_info("sh_mtu2: %s used for clock events\n", ced->name); + clockevents_register_device(ced); + ret = setup_irq(p->irqaction.irq, &p->irqaction); if (ret) { pr_err("sh_mtu2: failed to request irq %d\n", p->irqaction.irq); return; } - - pr_info("sh_mtu2: %s used for clock events\n", ced->name); - clockevents_register_device(ced); } static int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 93c2322feab..961f5b5ef6a 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -323,15 +323,15 @@ static void sh_tmu_register_clockevent(struct sh_tmu_priv *p, ced->set_next_event = sh_tmu_clock_event_next; ced->set_mode = sh_tmu_clock_event_mode; + pr_info("sh_tmu: %s used for clock events\n", ced->name); + clockevents_register_device(ced); + ret = setup_irq(p->irqaction.irq, &p->irqaction); if (ret) { pr_err("sh_tmu: failed to request irq %d\n", p->irqaction.irq); return; } - - pr_info("sh_tmu: %s used for clock events\n", ced->name); - clockevents_register_device(ced); } static int sh_tmu_register(struct sh_tmu_priv *p, char *name, |