Merge tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux into next/dt

From Jason Cooper:
orion dt for v3.8

 - ehci-orion dt binding
 - gpio-poweroff
 - use dt regulators
 - move mpp to DT/pinctrl

Depends on:

 - orion/boards

    - merge conflicts
       - keep all 'select's in Kconfig
       - remove all #includes in board-*.c

 - pinctrl/devel up to:

    - 06763c7 pinctrl: mvebu: move to its own directory

* tag 'orion_dt_for_3.8' of git://git.infradead.org/users/jcooper/linux: (211 commits)
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ARM: Kirkwood: Convert dnskw to pinctrl
  ARM: Kirkwood: Convert iConnect to pinctrl.
  ARM: Kirkwood: Convert TS219 to pinctrl.
  ARM: Kirkwood: Add DTSI files for pinctrl
  ARM: Kirkwood: Make use of mvebu pincltl and gpio drivers
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 46 insertions, 4 deletions

diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
index ca4a25ed844..e2c17d187d9 100644
--- a/drivers/clk/ux500/u8500_clk.c
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -40,7 +40,7 @@ void u8500_clk_init(void)
 				CLK_IS_ROOT|CLK_IGNORE_UNUSED,
 				32768);
 	clk_register_clkdev(clk, "clk32k", NULL);
-	clk_register_clkdev(clk, NULL, "rtc-pl031");
+	clk_register_clkdev(clk, "apb_pclk", "rtc-pl031");
 
 	/* PRCMU clocks */
 	fw_version = prcmu_get_fw_version();
@@ -228,10 +228,17 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
 				BIT(2), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1");
+
 	clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
 				BIT(3), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp0");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0");
+
 	clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
 				BIT(4), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp1");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1");
 
 	clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
 				BIT(5), 0);
@@ -239,6 +246,7 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
 				BIT(6), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2");
 
 	clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
 				BIT(7), 0);
@@ -246,6 +254,7 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
 				BIT(8), 0);
+	clk_register_clkdev(clk, "apb_pclk", "slimbus0");
 
 	clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
 				BIT(9), 0);
@@ -255,11 +264,16 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
 				BIT(10), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4");
+
 	clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
 				BIT(11), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp3");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3");
 
 	clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
 				BIT(0), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3");
 
 	clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
 				BIT(1), 0);
@@ -279,12 +293,13 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
 				BIT(5), 0);
+	clk_register_clkdev(clk, "apb_pclk", "msp2");
+	clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2");
 
 	clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
 				BIT(6), 0);
 	clk_register_clkdev(clk, "apb_pclk", "sdi1");
 
-
 	clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
 				BIT(7), 0);
 	clk_register_clkdev(clk, "apb_pclk", "sdi3");
@@ -316,10 +331,15 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
 				BIT(1), 0);
+	clk_register_clkdev(clk, "apb_pclk", "ssp0");
+
 	clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
 				BIT(2), 0);
+	clk_register_clkdev(clk, "apb_pclk", "ssp1");
+
 	clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
 				BIT(3), 0);
+	clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0");
 
 	clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
 				BIT(4), 0);
@@ -401,10 +421,17 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+
 	clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
 			U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp0");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0");
+
 	clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
 			U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp1");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1");
 
 	clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
 			U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
@@ -412,17 +439,25 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.2");
+
 	clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
-			U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
-	/* FIXME: Redefinition of BIT(3). */
+			U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "slimbus0");
+
 	clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
 			U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.4");
+
 	clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
 			U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp3");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3");
 
 	/* Periph2 */
 	clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
 			U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.3");
 
 	clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
 			U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
@@ -430,6 +465,8 @@ void u8500_clk_init(void)
 
 	clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
 			U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "msp2");
+	clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2");
 
 	clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
 			U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
@@ -450,10 +487,15 @@ void u8500_clk_init(void)
 	/* Periph3 */
 	clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
 			U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "ssp0");
+
 	clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
 			U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "ssp1");
+
 	clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
 			U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+	clk_register_clkdev(clk, NULL, "nmk-i2c.0");
 
 	clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
 			U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);