Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.

  The largest part of this is a conversion of device registration for
  some renesas shmobile/sh devices over to use resources.  This has
  required coordination with the corresponding arch/sh changes, and
  we've agreed to merge the arch/sh changes through our tree.

  Added in this branch is support for Trusted Foundations secure
  firmware, which is what is used on many of the commercial Nvidia Tegra
  products that are in the market, including the Nvidia Shield.  The
  code is local to arch/arm at this time since it's uncertain whether it
  will be shared with arm64 longer-term, if needed we will refactor
  later.

  A couple of new RTC drivers used on ARM boards, merged through our
  tree on request by the RTC maintainer.

  ... plus a bunch of smaller updates across the board, gpio conversions
  for davinci, etc"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  watchdog: davinci: rename platform driver to davinci-wdt
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data
  clk: versatile: fixup IM-PD1 clock implementation
  clk: versatile: pass a name to ICST clock provider
  ARM: integrator: pass parent IRQ to the SIC
  irqchip: versatile FPGA: support cascaded interrupts from DT
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
  serial: sh-sci: Add OF support
  serial: sh-sci: Add device tree bindings documentation
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Remove platform data scbrr_algo_id field
  ...

5 files changed, 80 insertions, 20 deletions

diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index f5e4c21b301..8cbfcf88fae 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -119,6 +119,7 @@ static const struct clk_ops icst_ops = {
 
 struct clk *icst_clk_register(struct device *dev,
 			const struct clk_icst_desc *desc,
+			const char *name,
 			void __iomem *base)
 {
 	struct clk *clk;
@@ -130,7 +131,7 @@ struct clk *icst_clk_register(struct device *dev,
 		pr_err("could not allocate ICST clock!\n");
 		return ERR_PTR(-ENOMEM);
 	}
-	init.name = "icst";
+	init.name = name;
 	init.ops = &icst_ops;
 	init.flags = CLK_IS_ROOT;
 	init.parent_names = NULL;
diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
index dad51b6ffd0..be99dd0da78 100644
--- a/drivers/clk/versatile/clk-icst.h
+++ b/drivers/clk/versatile/clk-icst.h
@@ -15,4 +15,5 @@ struct clk_icst_desc {
 
 struct clk *icst_clk_register(struct device *dev,
 			      const struct clk_icst_desc *desc,
+			      const char *name,
 			      void __iomem *base);
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index 369139af2a3..844f8d711a1 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -1,6 +1,6 @@
 /*
  * Clock driver for the ARM Integrator/IM-PD1 board
- * Copyright (C) 2012 Linus Walleij
+ * Copyright (C) 2012-2013 Linus Walleij
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -18,20 +18,28 @@
 #include "clk-icst.h"
 
 struct impd1_clk {
-	struct clk *vcoclk;
+	char *vco1name;
+	struct clk *vco1clk;
+	char *vco2name;
+	struct clk *vco2clk;
+	struct clk *mmciclk;
+	char *uartname;
 	struct clk *uartclk;
-	struct clk_lookup *clks[3];
+	char *spiname;
+	struct clk *spiclk;
+	char *scname;
+	struct clk *scclk;
+	struct clk_lookup *clks[6];
 };
 
+/* One entry for each connected IM-PD1 LM */
 static struct impd1_clk impd1_clks[4];
 
 /*
- * There are two VCO's on the IM-PD1 but only one is used by the
- * kernel, that is why we are only implementing the control of
- * IMPD1_OSC1 here.
+ * There are two VCO's on the IM-PD1
  */
 
-static const struct icst_params impd1_vco_params = {
+static const struct icst_params impd1_vco1_params = {
 	.ref		= 24000000,	/* 24 MHz */
 	.vco_max	= ICST525_VCO_MAX_3V,
 	.vco_min	= ICST525_VCO_MIN,
@@ -44,11 +52,29 @@ static const struct icst_params impd1_vco_params = {
 };
 
 static const struct clk_icst_desc impd1_icst1_desc = {
-	.params = &impd1_vco_params,
+	.params = &impd1_vco1_params,
 	.vco_offset = IMPD1_OSC1,
 	.lock_offset = IMPD1_LOCK,
 };
 
+static const struct icst_params impd1_vco2_params = {
+	.ref		= 24000000,	/* 24 MHz */
+	.vco_max	= ICST525_VCO_MAX_3V,
+	.vco_min	= ICST525_VCO_MIN,
+	.vd_min		= 12,
+	.vd_max		= 519,
+	.rd_min		= 3,
+	.rd_max		= 120,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
+};
+
+static const struct clk_icst_desc impd1_icst2_desc = {
+	.params = &impd1_vco2_params,
+	.vco_offset = IMPD1_OSC2,
+	.lock_offset = IMPD1_LOCK,
+};
+
 /**
  * integrator_impd1_clk_init() - set up the integrator clock tree
  * @base: base address of the logic module (LM)
@@ -66,16 +92,39 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
 	}
 	imc = &impd1_clks[id];
 
-	clk = icst_clk_register(NULL, &impd1_icst1_desc, base);
-	imc->vcoclk = clk;
+	imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id);
+	clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, base);
+	imc->vco1clk = clk;
 	imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
 
-	/* UART reference clock */
-	clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
-				14745600);
+	/* VCO2 is also called "CLK2" */
+	imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id);
+	clk = icst_clk_register(NULL, &impd1_icst2_desc, imc->vco2name, base);
+	imc->vco2clk = clk;
+
+	/* MMCI uses CLK2 right off */
+	imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00700", id);
+
+	/* UART reference clock divides CLK2 by a fixed factor 4 */
+	imc->uartname = kasprintf(GFP_KERNEL, "lm%x-uartclk", id);
+	clk = clk_register_fixed_factor(NULL, imc->uartname, imc->vco2name,
+				   CLK_IGNORE_UNUSED, 1, 4);
 	imc->uartclk = clk;
-	imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
-	imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
+	imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
+	imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
+
+	/* SPI PL022 clock divides CLK2 by a fixed factor 64 */
+	imc->spiname = kasprintf(GFP_KERNEL, "lm%x-spiclk", id);
+	clk = clk_register_fixed_factor(NULL, imc->spiname, imc->vco2name,
+				   CLK_IGNORE_UNUSED, 1, 64);
+	imc->clks[4] = clkdev_alloc(clk, NULL, "lm%x:00300", id);
+
+	/* Smart Card clock divides CLK2 by a fixed factor 4 */
+	imc->scname = kasprintf(GFP_KERNEL, "lm%x-scclk", id);
+	clk = clk_register_fixed_factor(NULL, imc->scname, imc->vco2name,
+				   CLK_IGNORE_UNUSED, 1, 4);
+	imc->scclk = clk;
+	imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00600", id);
 
 	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
 		clkdev_add(imc->clks[i]);
@@ -92,6 +141,13 @@ void integrator_impd1_clk_exit(unsigned int id)
 
 	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
 		clkdev_drop(imc->clks[i]);
+	clk_unregister(imc->spiclk);
 	clk_unregister(imc->uartclk);
-	clk_unregister(imc->vcoclk);
+	clk_unregister(imc->vco2clk);
+	clk_unregister(imc->vco1clk);
+	kfree(imc->scname);
+	kfree(imc->spiname);
+	kfree(imc->uartname);
+	kfree(imc->vco2name);
+	kfree(imc->vco1name);
 }
diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c
index 08593b4ee2c..bda8967e09c 100644
--- a/drivers/clk/versatile/clk-integrator.c
+++ b/drivers/clk/versatile/clk-integrator.c
@@ -78,7 +78,7 @@ void __init integrator_clk_init(bool is_cp)
 	clk_register_clkdev(clk, NULL, "sp804");
 
 	/* ICST VCO clock used on the Integrator/CP CLCD */
-	clk = icst_clk_register(NULL, &cp_icst_desc,
+	clk = icst_clk_register(NULL, &cp_icst_desc, "icst",
 				__io_address(INTEGRATOR_HDR_BASE));
 	clk_register_clkdev(clk, NULL, "clcd");
 }
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
index cda07e70a40..747e7b31117 100644
--- a/drivers/clk/versatile/clk-realview.c
+++ b/drivers/clk/versatile/clk-realview.c
@@ -84,9 +84,11 @@ void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176)
 
 	/* ICST VCO clock */
 	if (is_pb1176)
-		clk = icst_clk_register(NULL, &realview_osc0_desc, sysbase);
+		clk = icst_clk_register(NULL, &realview_osc0_desc,
+					"osc0", sysbase);
 	else
-		clk = icst_clk_register(NULL, &realview_osc4_desc, sysbase);
+		clk = icst_clk_register(NULL, &realview_osc4_desc,
+					"osc4", sysbase);
 
 	clk_register_clkdev(clk, NULL, "dev:clcd");
 	clk_register_clkdev(clk, NULL, "issp:clcd");