Merge branch 'master' into for-next

Sync with Linus tree to have 157550ff ("mtd: add GPMI-NAND driver
in the config and Makefile") as I have patch depending on that one.

15 files changed, 343 insertions, 686 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 423fd56bf61..43643033a3a 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -298,7 +298,7 @@ if RTC_LIB=n
 config RTC
 	tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
 	depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
-			&& !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN
+			&& !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN && !UML
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -346,7 +346,7 @@ config JS_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN
+	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN && !UML
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -490,7 +490,7 @@ config SCx200_GPIO
 
 config PC8736x_GPIO
 	tristate "NatSemi PC8736x GPIO Support"
-	depends on X86_32
+	depends on X86_32 && !UML
 	default SCx200_GPIO	# mostly N
 	select NSC_GPIO		# needed for support routines
 	help
diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c
index 056b289a1e8..3695773ce7c 100644
--- a/drivers/char/agp/hp-agp.c
+++ b/drivers/char/agp/hp-agp.c
@@ -336,7 +336,8 @@ hp_zx1_insert_memory (struct agp_memory *mem, off_t pg_start, int type)
 	off_t j, io_pg_start;
 	int io_pg_count;
 
-	if (type != 0 || mem->type != 0) {
+	if (type != mem->type ||
+		agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type)) {
 		return -EINVAL;
 	}
 
@@ -380,7 +381,8 @@ hp_zx1_remove_memory (struct agp_memory *mem, off_t pg_start, int type)
 	struct _hp_private *hp = &hp_private;
 	int i, io_pg_start, io_pg_count;
 
-	if (type != 0 || mem->type != 0) {
+	if (type != mem->type ||
+		agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type)) {
 		return -EINVAL;
 	}
 
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 85151019dde..c92424ca1a5 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -30,10 +30,10 @@
 /*
  * If we have Intel graphics, we're not going to have anything other than
  * an Intel IOMMU. So make the correct use of the PCI DMA API contingent
- * on the Intel IOMMU support (CONFIG_DMAR).
+ * on the Intel IOMMU support (CONFIG_INTEL_IOMMU).
  * Only newer chipsets need to bother with this, of course.
  */
-#ifdef CONFIG_DMAR
+#ifdef CONFIG_INTEL_IOMMU
 #define USE_PCI_DMA_API 1
 #else
 #define USE_PCI_DMA_API 0
@@ -923,6 +923,9 @@ static int intel_fake_agp_insert_entries(struct agp_memory *mem,
 {
 	int ret = -EINVAL;
 
+	if (intel_private.base.do_idle_maps)
+		return -ENODEV;
+
 	if (intel_private.clear_fake_agp) {
 		int start = intel_private.base.stolen_size / PAGE_SIZE;
 		int end = intel_private.base.gtt_mappable_entries;
@@ -985,6 +988,9 @@ static int intel_fake_agp_remove_entries(struct agp_memory *mem,
 	if (mem->page_count == 0)
 		return 0;
 
+	if (intel_private.base.do_idle_maps)
+		return -ENODEV;
+
 	intel_gtt_clear_range(pg_start, mem->page_count);
 
 	if (intel_private.base.needs_dmar) {
@@ -1177,6 +1183,26 @@ static void gen6_cleanup(void)
 {
 }
 
+/* Certain Gen5 chipsets require require idling the GPU before
+ * unmapping anything from the GTT when VT-d is enabled.
+ */
+static inline int needs_idle_maps(void)
+{
+#ifdef CONFIG_INTEL_IOMMU
+	const unsigned short gpu_devid = intel_private.pcidev->device;
+	extern int intel_iommu_gfx_mapped;
+
+	/* Query intel_iommu to see if we need the workaround. Presumably that
+	 * was loaded first.
+	 */
+	if ((gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB ||
+	     gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) &&
+	     intel_iommu_gfx_mapped)
+		return 1;
+#endif
+	return 0;
+}
+
 static int i9xx_setup(void)
 {
 	u32 reg_addr;
@@ -1211,6 +1237,9 @@ static int i9xx_setup(void)
 		intel_private.gtt_bus_addr = reg_addr + gtt_offset;
 	}
 
+	if (needs_idle_maps())
+		intel_private.base.do_idle_maps = 1;
+
 	intel_i9xx_setup_flush();
 
 	return 0;
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 1d2ebc7a494..0689bf6b018 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -60,6 +60,19 @@ config HW_RANDOM_AMD
 
 	  If unsure, say Y.
 
+config HW_RANDOM_ATMEL
+	tristate "Atmel Random Number Generator support"
+	depends on HW_RANDOM && ARCH_AT91SAM9G45
+	default HW_RANDOM
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Atmel AT91 devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atmel-rng.
+
+	  If unsure, say Y.
+
 config HW_RANDOM_GEODE
 	tristate "AMD Geode HW Random Number Generator support"
 	depends on HW_RANDOM && X86_32 && PCI
@@ -222,3 +235,18 @@ config HW_RANDOM_PPC4XX
 	 module will be called ppc4xx-rng.
 
 	 If unsure, say N.
+
+config UML_RANDOM
+	depends on UML
+	tristate "Hardware random number generator"
+	help
+	  This option enables UML's "hardware" random number generator.  It
+	  attaches itself to the host's /dev/random, supplying as much entropy
+	  as the host has, rather than the small amount the UML gets from its
+	  own drivers.  It registers itself as a standard hardware random number
+	  generator, major 10, minor 183, and the canonical device name is
+	  /dev/hwrng.
+	  The way to make use of this is to install the rng-tools package
+	  (check your distro, or download from
+	  http://sourceforge.net/projects/gkernel/).  rngd periodically reads
+	  /dev/hwrng and injects the entropy into /dev/random.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index c88f244c8a7..b2ff5265a99 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -7,6 +7,7 @@ rng-core-y := core.o
 obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
 obj-$(CONFIG_HW_RANDOM_INTEL) += intel-rng.o
 obj-$(CONFIG_HW_RANDOM_AMD) += amd-rng.o
+obj-$(CONFIG_HW_RANDOM_ATMEL) += atmel-rng.o
 obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o
 obj-$(CONFIG_HW_RANDOM_N2RNG) += n2-rng.o
 n2-rng-y := n2-drv.o n2-asm.o
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
new file mode 100644
index 00000000000..241df2e76ab
--- /dev/null
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2011 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/hw_random.h>
+#include <linux/platform_device.h>
+
+#define TRNG_CR		0x00
+#define TRNG_ISR	0x1c
+#define TRNG_ODATA	0x50
+
+#define TRNG_KEY	0x524e4700 /* RNG */
+
+struct atmel_trng {
+	struct clk *clk;
+	void __iomem *base;
+	struct hwrng rng;
+};
+
+static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
+			   bool wait)
+{
+	struct atmel_trng *trng = container_of(rng, struct atmel_trng, rng);
+	u32 *data = buf;
+
+	/* data ready? */
+	if (readl(trng->base + TRNG_ODATA) & 1) {
+		*data = readl(trng->base + TRNG_ODATA);
+		return 4;
+	} else
+		return 0;
+}
+
+static int atmel_trng_probe(struct platform_device *pdev)
+{
+	struct atmel_trng *trng;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL);
+	if (!trng)
+		return -ENOMEM;
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     resource_size(res), pdev->name))
+		return -EBUSY;
+
+	trng->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!trng->base)
+		return -EBUSY;
+
+	trng->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(trng->clk))
+		return PTR_ERR(trng->clk);
+
+	ret = clk_enable(trng->clk);
+	if (ret)
+		goto err_enable;
+
+	writel(TRNG_KEY | 1, trng->base + TRNG_CR);
+	trng->rng.name = pdev->name;
+	trng->rng.read = atmel_trng_read;
+
+	ret = hwrng_register(&trng->rng);
+	if (ret)
+		goto err_register;
+
+	platform_set_drvdata(pdev, trng);
+
+	return 0;
+
+err_register:
+	clk_disable(trng->clk);
+err_enable:
+	clk_put(trng->clk);
+
+	return ret;
+}
+
+static int __devexit atmel_trng_remove(struct platform_device *pdev)
+{
+	struct atmel_trng *trng = platform_get_drvdata(pdev);
+
+	hwrng_unregister(&trng->rng);
+
+	writel(TRNG_KEY, trng->base + TRNG_CR);
+	clk_disable(trng->clk);
+	clk_put(trng->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_trng_suspend(struct device *dev)
+{
+	struct atmel_trng *trng = dev_get_drvdata(dev);
+
+	clk_disable(trng->clk);
+
+	return 0;
+}
+
+static int atmel_trng_resume(struct device *dev)
+{
+	struct atmel_trng *trng = dev_get_drvdata(dev);
+
+	return clk_enable(trng->clk);
+}
+
+static const struct dev_pm_ops atmel_trng_pm_ops = {
+	.suspend	= atmel_trng_suspend,
+	.resume		= atmel_trng_resume,
+};
+#endif /* CONFIG_PM */
+
+static struct platform_driver atmel_trng_driver = {
+	.probe		= atmel_trng_probe,
+	.remove		= __devexit_p(atmel_trng_remove),
+	.driver		= {
+		.name	= "atmel-trng",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &atmel_trng_pm_ops,
+#endif /* CONFIG_PM */
+	},
+};
+
+static int __init atmel_trng_init(void)
+{
+	return platform_driver_register(&atmel_trng_driver);
+}
+module_init(atmel_trng_init);
+
+static void __exit atmel_trng_exit(void)
+{
+	platform_driver_unregister(&atmel_trng_driver);
+}
+module_exit(atmel_trng_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("Atmel true random number generator driver");
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 75f1cbd61c1..fd699ccecf5 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/virtio.h>
 #include <linux/virtio_rng.h>
+#include <linux/module.h>
 
 static struct virtqueue *vq;
 static unsigned int data_avail;
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 3302586655c..c2917ffad2c 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -65,6 +65,7 @@
  * mechanism for it at that time.
  */
 #include <asm/kdebug.h>
+#include <asm/nmi.h>
 #define HAVE_DIE_NMI
 #endif
 
@@ -1077,17 +1078,8 @@ static void ipmi_unregister_watchdog(int ipmi_intf)
 
 #ifdef HAVE_DIE_NMI
 static int
-ipmi_nmi(struct notifier_block *self, unsigned long val, void *data)
+ipmi_nmi(unsigned int val, struct pt_regs *regs)
 {
-	struct die_args *args = data;
-
-	if (val != DIE_NMIUNKNOWN)
-		return NOTIFY_OK;
-
-	/* Hack, if it's a memory or I/O error, ignore it. */
-	if (args->err & 0xc0)
-		return NOTIFY_OK;
-
 	/*
 	 * If we get here, it's an NMI that's not a memory or I/O
 	 * error.  We can't truly tell if it's from IPMI or not
@@ -1097,15 +1089,15 @@ ipmi_nmi(struct notifier_block *self, unsigned long val, void *data)
 
 	if (testing_nmi) {
 		testing_nmi = 2;
-		return NOTIFY_STOP;
+		return NMI_HANDLED;
 	}
 
 	/* If we are not expecting a timeout, ignore it. */
 	if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE)
-		return NOTIFY_OK;
+		return NMI_DONE;
 
 	if (preaction_val != WDOG_PRETIMEOUT_NMI)
-		return NOTIFY_OK;
+		return NMI_DONE;
 
 	/*
 	 * If no one else handled the NMI, we assume it was the IPMI
@@ -1120,12 +1112,8 @@ ipmi_nmi(struct notifier_block *self, unsigned long val, void *data)
 			panic(PFX "pre-timeout");
 	}
 
-	return NOTIFY_STOP;
+	return NMI_HANDLED;
 }
-
-static struct notifier_block ipmi_nmi_handler = {
-	.notifier_call = ipmi_nmi
-};
 #endif
 
 static int wdog_reboot_handler(struct notifier_block *this,
@@ -1290,7 +1278,8 @@ static void check_parms(void)
 		}
 	}
 	if (do_nmi && !nmi_handler_registered) {
-		rv = register_die_notifier(&ipmi_nmi_handler);
+		rv = register_nmi_handler(NMI_UNKNOWN, ipmi_nmi, 0,
+						"ipmi");
 		if (rv) {
 			printk(KERN_WARNING PFX
 			       "Can't register nmi handler\n");
@@ -1298,7 +1287,7 @@ static void check_parms(void)
 		} else
 			nmi_handler_registered = 1;
 	} else if (!do_nmi && nmi_handler_registered) {
-		unregister_die_notifier(&ipmi_nmi_handler);
+		unregister_nmi_handler(NMI_UNKNOWN, "ipmi");
 		nmi_handler_registered = 0;
 	}
 #endif
@@ -1336,7 +1325,7 @@ static int __init ipmi_wdog_init(void)
 	if (rv) {
 #ifdef HAVE_DIE_NMI
 		if (nmi_handler_registered)
-			unregister_die_notifier(&ipmi_nmi_handler);
+			unregister_nmi_handler(NMI_UNKNOWN, "ipmi");
 #endif
 		atomic_notifier_chain_unregister(&panic_notifier_list,
 						 &wdog_panic_notifier);
@@ -1357,7 +1346,7 @@ static void __exit ipmi_wdog_exit(void)
 
 #ifdef HAVE_DIE_NMI
 	if (nmi_handler_registered)
-		unregister_die_notifier(&ipmi_nmi_handler);
+		unregister_nmi_handler(NMI_UNKNOWN, "ipmi");
 #endif
 
 	atomic_notifier_chain_unregister(&panic_notifier_list,
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 8fc04b4f311..14517903371 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -26,6 +26,7 @@
 #include <linux/bootmem.h>
 #include <linux/splice.h>
 #include <linux/pfn.h>
+#include <linux/export.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
diff --git a/drivers/char/ps3flash.c b/drivers/char/ps3flash.c
index d0c57c2e290..6abdde4da2b 100644
--- a/drivers/char/ps3flash.c
+++ b/drivers/char/ps3flash.c
@@ -22,6 +22,7 @@
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <asm/lv1call.h>
 #include <asm/ps3stor.h>
diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
index 810aff9e750..7c7f42a1f88 100644
--- a/drivers/char/ramoops.c
+++ b/drivers/char/ramoops.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/kmsg_dump.h>
 #include <linux/time.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
diff --git a/drivers/char/random.c b/drivers/char/random.c
index c35a785005b..63e19ba56bb 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -932,7 +932,21 @@ static ssize_t extract_entropy_user(struct entropy_store *r, void __user *buf,
  */
 void get_random_bytes(void *buf, int nbytes)
 {
-	extract_entropy(&nonblocking_pool, buf, nbytes, 0, 0);
+	char *p = buf;
+
+	while (nbytes) {
+		unsigned long v;
+		int chunk = min(nbytes, (int)sizeof(unsigned long));
+		
+		if (!arch_get_random_long(&v))
+			break;
+		
+		memcpy(buf, &v, chunk);
+		p += chunk;
+		nbytes -= chunk;
+	}
+
+	extract_entropy(&nonblocking_pool, p, nbytes, 0, 0);
 }
 EXPORT_SYMBOL(get_random_bytes);
 
@@ -1318,9 +1332,14 @@ late_initcall(random_int_secret_init);
 DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash);
 unsigned int get_random_int(void)
 {
-	__u32 *hash = get_cpu_var(get_random_int_hash);
+	__u32 *hash;
 	unsigned int ret;
 
+	if (arch_get_random_int(&ret))
+		return ret;
+
+	hash = get_cpu_var(get_random_int_hash);
+
 	hash[0] += current->pid + jiffies + get_cycles();
 	md5_transform(hash, random_int_secret);
 	ret = hash[0];
diff --git a/drivers/char/scc.h b/drivers/char/scc.h
deleted file mode 100644
index 341b1142bea..00000000000
--- a/drivers/char/scc.h
+++ /dev/null
@@ -1,613 +0,0 @@
-/*
- * atari_SCC.h: Definitions for the Am8530 Serial Communications Controller
- *
- * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- */
-
-
-#ifndef _SCC_H
-#define _SCC_H
-
-#include <linux/delay.h>
-
-/* Special configuration ioctls for the Atari SCC5380 Serial
- * Communications Controller
- */
-
-/* ioctl command codes */
-
-#define TIOCGATSCC	0x54c0	/* get SCC configuration */
-#define TIOCSATSCC	0x54c1	/* set SCC configuration */
-#define TIOCDATSCC	0x54c2	/* reset configuration to defaults */
-
-/* Clock sources */
-
-#define CLK_RTxC	0
-#define CLK_TRxC	1
-#define CLK_PCLK	2
-
-/* baud_bases for the common clocks in the Atari. These are the real
- * frequencies divided by 16.
- */
-   
-#define SCC_BAUD_BASE_TIMC	19200	/* 0.3072 MHz from TT-MFP, Timer C */
-#define SCC_BAUD_BASE_BCLK	153600	/* 2.4576 MHz */
-#define SCC_BAUD_BASE_PCLK4	229500	/* 3.6720 MHz */
-#define SCC_BAUD_BASE_PCLK	503374	/* 8.0539763 MHz */
-#define SCC_BAUD_BASE_NONE	0	/* for not connected or unused
-					 * clock sources */
-
-/* The SCC clock configuration structure */
-
-struct scc_clock_config {
-	unsigned	RTxC_base;	/* base_baud of RTxC */
-	unsigned	TRxC_base;	/* base_baud of TRxC */
-	unsigned	PCLK_base;	/* base_baud of PCLK, both channels! */
-	struct {
-		unsigned clksrc;	/* CLK_RTxC, CLK_TRxC or CLK_PCLK */
-		unsigned divisor;	/* divisor for base baud, valid values:
-					 * see below */
-	} baud_table[17];		/* For 50, 75, 110, 135, 150, 200, 300,
-					 * 600, 1200, 1800, 2400, 4800, 9600,
-					 * 19200, 38400, 57600 and 115200 bps.
-					 * The last two could be replaced by
-					 * other rates > 38400 if they're not
-					 * possible.
-					 */
-};
-
-/* The following divisors are valid:
- *
- *   - CLK_RTxC: 1 or even (1, 2 and 4 are the direct modes, > 4 use
- *               the BRG)
- *
- *   - CLK_TRxC: 1, 2 or 4 (no BRG, only direct modes possible)
- *
- *   - CLK_PCLK: >= 4 and even (no direct modes, only BRG)
- *
- */
-
-struct scc_port {
-	struct gs_port		gs;
-	volatile unsigned char	*ctrlp;
-	volatile unsigned char	*datap;
-	int			x_char;		/* xon/xoff character */
-	int			c_dcd;
-	int			channel;
-	struct scc_port		*port_a;	/* Reference to port A and B */
-	struct scc_port		*port_b;	/*   structs for reg access  */
-};
-
-#define SCC_MAGIC	0x52696368
-
-/***********************************************************************/
-/*                                                                     */
-/*                             Register Names                          */
-/*                                                                     */
-/***********************************************************************/
-
-/* The SCC documentation gives no explicit names to the registers,
- * they're just called WR0..15 and RR0..15. To make the source code
- * better readable and make the transparent write reg read access (see
- * below) possible, I christen them here with self-invented names.
- * Note that (real) read registers are assigned numbers 16..31. WR7'
- * has number 33.
- */
-
-#define	COMMAND_REG		0	/* wo */
-#define	INT_AND_DMA_REG		1	/* wo */
-#define	INT_VECTOR_REG		2	/* rw, common to both channels */
-#define	RX_CTRL_REG		3	/* rw */
-#define	AUX1_CTRL_REG		4	/* rw */
-#define	TX_CTRL_REG		5	/* rw */
-#define	SYNC_ADR_REG		6	/* wo */
-#define	SYNC_CHAR_REG		7	/* wo */
-#define	SDLC_OPTION_REG		33	/* wo */
-#define	TX_DATA_REG		8	/* wo */
-#define	MASTER_INT_CTRL		9	/* wo, common to both channels */
-#define	AUX2_CTRL_REG		10	/* rw */
-#define	CLK_CTRL_REG		11	/* wo */
-#define	TIMER_LOW_REG		12	/* rw */
-#define	TIMER_HIGH_REG		13	/* rw */
-#define	DPLL_CTRL_REG		14	/* wo */
-#define	INT_CTRL_REG		15	/* rw */
-
-#define	STATUS_REG		16	/* ro */
-#define	SPCOND_STATUS_REG	17	/* wo */
-/* RR2 is WR2 for Channel A, Channel B gives vector + current status: */
-#define	CURR_VECTOR_REG		18	/* Ch. B only, Ch. A for rw */
-#define	INT_PENDING_REG		19	/* Channel A only! */
-/* RR4 is WR4, if b6(MR7') == 1 */
-/* RR5 is WR5, if b6(MR7') == 1 */
-#define	FS_FIFO_LOW_REG		22	/* ro */
-#define	FS_FIFO_HIGH_REG	23	/* ro */
-#define	RX_DATA_REG		24	/* ro */
-/* RR9 is WR3, if b6(MR7') == 1 */
-#define	DPLL_STATUS_REG		26	/* ro */
-/* RR11 is WR10, if b6(MR7') == 1 */
-/* RR12 is WR12 */
-/* RR13 is WR13 */
-/* RR14 not present */
-/* RR15 is WR15 */
-
-
-/***********************************************************************/
-/*                                                                     */
-/*                             Register Values                         */
-/*                                                                     */
-/***********************************************************************/
-
-
-/* WR0: COMMAND_REG "CR" */
-
-#define	CR_RX_CRC_RESET		0x40
-#define	CR_TX_CRC_RESET		0x80
-#define	CR_TX_UNDERRUN_RESET	0xc0
-
-#define	CR_EXTSTAT_RESET	0x10
-#define	CR_SEND_ABORT		0x18
-#define	CR_ENAB_INT_NEXT_RX	0x20
-#define	CR_TX_PENDING_RESET	0x28
-#define	CR_ERROR_RESET		0x30
-#define	CR_HIGHEST_IUS_RESET	0x38
-
-
-/* WR1: INT_AND_DMA_REG "IDR" */
-
-#define	IDR_EXTSTAT_INT_ENAB	0x01
-#define	IDR_TX_INT_ENAB		0x02
-#define	IDR_PARERR_AS_SPCOND	0x04
-
-#define	IDR_RX_INT_DISAB	0x00
-#define	IDR_RX_INT_FIRST	0x08
-#define	IDR_RX_INT_ALL		0x10
-#define	IDR_RX_INT_SPCOND	0x18
-#define	IDR_RX_INT_MASK		0x18
-
-#define	IDR_WAITREQ_RX		0x20
-#define	IDR_WAITREQ_IS_REQ	0x40
-#define	IDR_WAITREQ_ENAB	0x80
-
-
-/* WR3: RX_CTRL_REG "RCR" */
-
-#define	RCR_RX_ENAB		0x01
-#define	RCR_DISCARD_SYNC_CHARS	0x02
-#define	RCR_ADDR_SEARCH		0x04
-#define	RCR_CRC_ENAB		0x08
-#define	RCR_SEARCH_MODE		0x10
-#define	RCR_AUTO_ENAB_MODE	0x20
-
-#define	RCR_CHSIZE_MASK		0xc0
-#define	RCR_CHSIZE_5		0x00
-#define	RCR_CHSIZE_6		0x40
-#define	RCR_CHSIZE_7		0x80
-#define	RCR_CHSIZE_8		0xc0
-
-
-/* WR4: AUX1_CTRL_REG "A1CR" */
-
-#define	A1CR_PARITY_MASK	0x03
-#define	A1CR_PARITY_NONE	0x00
-#define	A1CR_PARITY_ODD		0x01
-#define	A1CR_PARITY_EVEN	0x03
-
-#define	A1CR_MODE_MASK		0x0c
-#define	A1CR_MODE_SYNCR		0x00
-#define	A1CR_MODE_ASYNC_1	0x04
-#define	A1CR_MODE_ASYNC_15	0x08
-#define	A1CR_MODE_ASYNC_2	0x0c
-
-#define	A1CR_SYNCR_MODE_MASK	0x30
-#define	A1CR_SYNCR_MONOSYNC	0x00
-#define	A1CR_SYNCR_BISYNC	0x10
-#define	A1CR_SYNCR_SDLC		0x20
-#define	A1CR_SYNCR_EXTCSYNC	0x30
-
-#define	A1CR_CLKMODE_MASK	0xc0
-#define	A1CR_CLKMODE_x1		0x00
-#define	A1CR_CLKMODE_x16	0x40
-#define	A1CR_CLKMODE_x32	0x80
-#define	A1CR_CLKMODE_x64	0xc0
-
-
-/* WR5: TX_CTRL_REG "TCR" */
-
-#define	TCR_TX_CRC_ENAB		0x01
-#define	TCR_RTS			0x02
-#define	TCR_USE_CRC_CCITT	0x00
-#define	TCR_USE_CRC_16		0x04
-#define	TCR_TX_ENAB		0x08
-#define	TCR_SEND_BREAK		0x10
-
-#define	TCR_CHSIZE_MASK		0x60
-#define	TCR_CHSIZE_5		0x00
-#define	TCR_CHSIZE_6		0x20
-#define	TCR_CHSIZE_7		0x40
-#define	TCR_CHSIZE_8		0x60
-
-#define	TCR_DTR			0x80
-
-
-/* WR7': SLDC_OPTION_REG "SOR" */
-
-#define	SOR_AUTO_TX_ENAB	0x01
-#define	SOR_AUTO_EOM_RESET	0x02
-#define	SOR_AUTO_RTS_MODE	0x04
-#define	SOR_NRZI_DISAB_HIGH	0x08
-#define	SOR_ALT_DTRREQ_TIMING	0x10
-#define	SOR_READ_CRC_CHARS	0x20
-#define	SOR_EXTENDED_REG_ACCESS	0x40
-
-
-/* WR9: MASTER_INT_CTRL "MIC" */
-
-#define	MIC_VEC_INCL_STAT	0x01
-#define	MIC_NO_VECTOR		0x02
-#define	MIC_DISAB_LOWER_CHAIN	0x04
-#define	MIC_MASTER_INT_ENAB	0x08
-#define	MIC_STATUS_HIGH		0x10
-#define	MIC_IGN_INTACK		0x20
-
-#define	MIC_NO_RESET		0x00
-#define	MIC_CH_A_RESET		0x40
-#define	MIC_CH_B_RESET		0x80
-#define	MIC_HARD_RESET		0xc0
-
-
-/* WR10: AUX2_CTRL_REG "A2CR" */
-
-#define	A2CR_SYNC_6		0x01
-#define	A2CR_LOOP_MODE		0x02
-#define	A2CR_ABORT_ON_UNDERRUN	0x04
-#define	A2CR_MARK_IDLE		0x08
-#define	A2CR_GO_ACTIVE_ON_POLL	0x10
-
-#define	A2CR_CODING_MASK	0x60
-#define	A2CR_CODING_NRZ		0x00
-#define	A2CR_CODING_NRZI	0x20
-#define	A2CR_CODING_FM1		0x40
-#define	A2CR_CODING_FM0		0x60
-
-#define	A2CR_PRESET_CRC_1	0x80
-
-
-/* WR11: CLK_CTRL_REG "CCR" */
-
-#define	CCR_TRxCOUT_MASK	0x03
-#define	CCR_TRxCOUT_XTAL	0x00
-#define	CCR_TRxCOUT_TXCLK	0x01
-#define	CCR_TRxCOUT_BRG		0x02
-#define	CCR_TRxCOUT_DPLL	0x03
-
-#define	CCR_TRxC_OUTPUT		0x04
-
-#define	CCR_TXCLK_MASK		0x18
-#define	CCR_TXCLK_RTxC		0x00
-#define	CCR_TXCLK_TRxC		0x08
-#define	CCR_TXCLK_BRG		0x10
-#define	CCR_TXCLK_DPLL		0x18
-
-#define	CCR_RXCLK_MASK		0x60
-#define	CCR_RXCLK_RTxC		0x00
-#define	CCR_RXCLK_TRxC		0x20
-#define	CCR_RXCLK_BRG		0x40
-#define	CCR_RXCLK_DPLL		0x60
-
-#define	CCR_RTxC_XTAL		0x80
-
-
-/* WR14: DPLL_CTRL_REG "DCR" */
-
-#define	DCR_BRG_ENAB		0x01
-#define	DCR_BRG_USE_PCLK	0x02
-#define	DCR_DTRREQ_IS_REQ	0x04
-#define	DCR_AUTO_ECHO		0x08
-#define	DCR_LOCAL_LOOPBACK	0x10
-
-#define	DCR_DPLL_EDGE_SEARCH	0x20
-#define	DCR_DPLL_ERR_RESET	0x40
-#define	DCR_DPLL_DISAB		0x60
-#define	DCR_DPLL_CLK_BRG	0x80
-#define	DCR_DPLL_CLK_RTxC	0xa0
-#define	DCR_DPLL_FM		0xc0
-#define	DCR_DPLL_NRZI		0xe0
-
-
-/* WR15: INT_CTRL_REG "ICR" */
-
-#define	ICR_OPTIONREG_SELECT	0x01
-#define	ICR_ENAB_BRG_ZERO_INT	0x02
-#define	ICR_USE_FS_FIFO		0x04
-#define	ICR_ENAB_DCD_INT	0x08
-#define	ICR_ENAB_SYNC_INT	0x10
-#define	ICR_ENAB_CTS_INT	0x20
-#define	ICR_ENAB_UNDERRUN_INT	0x40
-#define	ICR_ENAB_BREAK_INT	0x80
-
-
-/* RR0: STATUS_REG "SR" */
-
-#define	SR_CHAR_AVAIL		0x01
-#define	SR_BRG_ZERO		0x02
-#define	SR_TX_BUF_EMPTY		0x04
-#define	SR_DCD			0x08
-#define	SR_SYNC_ABORT		0x10
-#define	SR_CTS			0x20
-#define	SR_TX_UNDERRUN		0x40
-#define	SR_BREAK		0x80
-
-
-/* RR1: SPCOND_STATUS_REG "SCSR" */
-
-#define	SCSR_ALL_SENT		0x01
-#define	SCSR_RESIDUAL_MASK	0x0e
-#define	SCSR_PARITY_ERR		0x10
-#define	SCSR_RX_OVERRUN		0x20
-#define	SCSR_CRC_FRAME_ERR	0x40
-#define	SCSR_END_OF_FRAME	0x80
-
-
-/* RR3: INT_PENDING_REG "IPR" */
-
-#define	IPR_B_EXTSTAT		0x01
-#define	IPR_B_TX		0x02
-#define	IPR_B_RX		0x04
-#define	IPR_A_EXTSTAT		0x08
-#define	IPR_A_TX		0x10
-#define	IPR_A_RX		0x20
-
-
-/* RR7: FS_FIFO_HIGH_REG "FFHR" */
-
-#define	FFHR_CNT_MASK		0x3f
-#define	FFHR_IS_FROM_FIFO	0x40
-#define	FFHR_FIFO_OVERRUN	0x80
-
-
-/* RR10: DPLL_STATUS_REG "DSR" */
-
-#define	DSR_ON_LOOP		0x02
-#define	DSR_ON_LOOP_SENDING	0x10
-#define	DSR_TWO_CLK_MISSING	0x40
-#define	DSR_ONE_CLK_MISSING	0x80
-
-/***********************************************************************/
-/*                                                                     */
-/*                             Register Access                         */
-/*                                                                     */
-/***********************************************************************/
-
-
-/* The SCC needs 3.5 PCLK cycles recovery time between to register
- * accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 *
- * 125 ns = 437.5 ns. This is too short for udelay().
- * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be
- * quite right
- */
-
-#define scc_reg_delay() \
-    do {			\
-	if (MACH_IS_MVME16x || MACH_IS_BVME6000 || MACH_IS_MVME147)	\
-		__asm__ __volatile__ ( " nop; nop");			\
-	else if (MACH_IS_ATARI)						\
-		__asm__ __volatile__ ( "tstb %0" : : "g" (*_scc_del) : "cc" );\
-    } while (0)
-
-static unsigned char scc_shadow[2][16];
-
-/* The following functions should relax the somehow complicated
- * register access of the SCC. _SCCwrite() stores all written values
- * (except for WR0 and WR8) in shadow registers for later recall. This
- * removes the burden of remembering written values as needed. The
- * extra work of storing the value doesn't count, since a delay is
- * needed after a SCC access anyway. Additionally, _SCCwrite() manages
- * writes to WR0 and WR8 differently, because these can be accessed
- * directly with less overhead. Another special case are WR7 and WR7'.
- * _SCCwrite automatically checks what of this registers is selected
- * and changes b0 of WR15 if needed.
- * 
- * _SCCread() for standard read registers is straightforward, except
- * for RR2 (split into two "virtual" registers: one for the value
- * written to WR2 (from the shadow) and one for the vector including
- * status from RR2, Ch. B) and RR3. The latter must be read from
- * Channel A, because it reads as all zeros on Ch. B. RR0 and RR8 can
- * be accessed directly as before.
- * 
- * The two inline function contain complicated switch statements. But
- * I rely on regno and final_delay being constants, so gcc can reduce
- * the whole stuff to just some assembler statements.
- * 
- * _SCCwrite and _SCCread aren't intended to be used directly under
- * normal circumstances. The macros SCCread[_ND] and SCCwrite[_ND] are
- * for that purpose. They assume that a local variable 'port' is
- * declared and pointing to the port's scc_struct entry. The
- * variants with "_NB" appended should be used if no other SCC
- * accesses follow immediately (within 0.5 usecs). They just skip the
- * final delay nops.
- * 
- * Please note that accesses to SCC registers should only take place
- * when interrupts are turned off (at least if SCC interrupts are
- * enabled). Otherwise, an interrupt could interfere with the
- * two-stage accessing process.
- *
- */
-
-
-static __inline__ void _SCCwrite(
-	struct scc_port *port,
-	unsigned char *shadow,
-	volatile unsigned char *_scc_del,
-	int regno,
-	unsigned char val, int final_delay )
-{
-	switch( regno ) {
-
-	  case COMMAND_REG:
-		/* WR0 can be written directly without pointing */
-		*port->ctrlp = val;
-		break;
-
-	  case SYNC_CHAR_REG:
-		/* For WR7, first set b0 of WR15 to 0, if needed */
-		if (shadow[INT_CTRL_REG] & ICR_OPTIONREG_SELECT) {
-			*port->ctrlp = 15;
-			shadow[INT_CTRL_REG] &= ~ICR_OPTIONREG_SELECT;
-			scc_reg_delay();
-			*port->ctrlp = shadow[INT_CTRL_REG];
-			scc_reg_delay();
-		}
-		goto normal_case;
-		
-	  case SDLC_OPTION_REG:
-		/* For WR7', first set b0 of WR15 to 1, if needed */
-		if (!(shadow[INT_CTRL_REG] & ICR_OPTIONREG_SELECT)) {
-			*port->ctrlp = 15;
-			shadow[INT_CTRL_REG] |= ICR_OPTIONREG_SELECT;
-			scc_reg_delay();
-			*port->ctrlp = shadow[INT_CTRL_REG];
-			scc_reg_delay();
-		}
-		*port->ctrlp = 7;
-		shadow[8] = val;	/* WR7' shadowed at WR8 */
-		scc_reg_delay();
-		*port->ctrlp = val;
-		break;
-
-	  case TX_DATA_REG:		/* WR8 */
-		/* TX_DATA_REG can be accessed directly on some h/w */
-		if (MACH_IS_MVME16x || MACH_IS_BVME6000 || MACH_IS_MVME147)
-		{
-			*port->ctrlp = regno;
-			scc_reg_delay();
-			*port->ctrlp = val;
-		}
-		else
-			*port->datap = val;
-		break;
-
-	  case MASTER_INT_CTRL:
-		*port->ctrlp = regno;
-		val &= 0x3f;	/* bits 6..7 are the reset commands */
-		scc_shadow[0][regno] = val;
-		scc_reg_delay();
-		*port->ctrlp = val;
-		break;
-
-	  case DPLL_CTRL_REG:
-		*port->ctrlp = regno;
-		val &= 0x1f;			/* bits 5..7 are the DPLL commands */
-		shadow[regno] = val;
-		scc_reg_delay();
-		*port->ctrlp = val;
-		break;
-
-	  case 1 ... 6:	
-	  case 10 ... 13:
-	  case 15:
-	  normal_case:
-		*port->ctrlp = regno;
-		shadow[regno] = val;
-		scc_reg_delay();
-		*port->ctrlp = val;
-		break;
-		
-	  default:
-		printk( "Bad SCC write access to WR%d\n", regno );
-		break;
-		
-	}
-
-	if (final_delay)
-		scc_reg_delay();
-}
-
-
-static __inline__ unsigned char _SCCread(
-	struct scc_port *port,
-	unsigned char *shadow,
-	volatile unsigned char *_scc_del,
-	int regno, int final_delay )
-{
-	unsigned char rv;
-
-	switch( regno ) {
-
-		/* --- real read registers --- */
-	  case STATUS_REG:
-		rv = *port->ctrlp;
-		break;
-
-	  case INT_PENDING_REG:
-		/* RR3: read only from Channel A! */
-		port = port->port_a;
-		goto normal_case;
-
-	  case RX_DATA_REG:
-		/* RR8 can be accessed directly on some h/w */
-		if (MACH_IS_MVME16x || MACH_IS_BVME6000 || MACH_IS_MVME147)
-		{
-			*port->ctrlp = 8;
-			scc_reg_delay();
-			rv = *port->ctrlp;
-		}
-		else
-			rv = *port->datap;
-		break;
-
-	  case CURR_VECTOR_REG:
-		/* RR2 (vector including status) from Ch. B */
-		port = port->port_b;
-		goto normal_case;
-		
-		/* --- reading write registers: access the shadow --- */
-	  case 1 ... 7:
-	  case 10 ... 15:
-		return shadow[regno]; /* no final delay! */
-
-		/* WR7' is special, because it is shadowed at the place of WR8 */
-	  case SDLC_OPTION_REG:
-		return shadow[8]; /* no final delay! */
-
-		/* WR9 is special too, because it is common for both channels */
-	  case MASTER_INT_CTRL:
-		return scc_shadow[0][9]; /* no final delay! */
-
-	  default:
-		printk( "Bad SCC read access to %cR%d\n", (regno & 16) ? 'R' : 'W',
-				regno & ~16 );
-		break;
-		
-	  case SPCOND_STATUS_REG:
-	  case FS_FIFO_LOW_REG:
-	  case FS_FIFO_HIGH_REG:
-	  case DPLL_STATUS_REG:
-	  normal_case:
-		*port->ctrlp = regno & 0x0f;
-		scc_reg_delay();
-		rv = *port->ctrlp;
-		break;
-		
-	}
-
-	if (final_delay)
-		scc_reg_delay();
-	return rv;
-}
-
-#define SCC_ACCESS_INIT(port)						\
-	unsigned char *_scc_shadow = &scc_shadow[port->channel][0]
-
-#define	SCCwrite(reg,val)	_SCCwrite(port,_scc_shadow,scc_del,(reg),(val),1)
-#define	SCCwrite_NB(reg,val)	_SCCwrite(port,_scc_shadow,scc_del,(reg),(val),0)
-#define	SCCread(reg)		_SCCread(port,_scc_shadow,scc_del,(reg),1)
-#define	SCCread_NB(reg)		_SCCread(port,_scc_shadow,scc_del,(reg),0)
-
-#define SCCmod(reg,and,or)	SCCwrite((reg),(SCCread(reg)&(and))|(or))
-
-#endif /* _SCC_H */
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index a1f68af4ccf..eedd5474850 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -17,6 +17,7 @@
 #include <linux/device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
+#include <linux/export.h>
 
 struct ttyprintk_port {
 	struct tty_port port;
@@ -170,7 +171,7 @@ static const struct tty_operations ttyprintk_ops = {
 	.ioctl = tpk_ioctl,
 };
 
-struct tty_port_operations null_ops = { };
+static struct tty_port_operations null_ops = { };
 
 static struct tty_driver *ttyprintk_driver;
 
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index fb68b129537..8e3c46d67cb 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -19,8 +19,10 @@
  */
 #include <linux/cdev.h>
 #include <linux/debugfs.h>
+#include <linux/completion.h>
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/freezer.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/list.h>
@@ -32,6 +34,7 @@
 #include <linux/virtio_console.h>
 #include <linux/wait.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 #include "../tty/hvc/hvc_console.h"
 
 /*
@@ -73,6 +76,7 @@ struct ports_driver_data {
 static struct ports_driver_data pdrvdata;
 
 DEFINE_SPINLOCK(pdrvdata_lock);
+DECLARE_COMPLETION(early_console_added);
 
 /* This struct holds information that's relevant only for console ports */
 struct console {
@@ -151,6 +155,10 @@ struct ports_device {
 	int chr_major;
 };
 
+struct port_stats {
+	unsigned long bytes_sent, bytes_received, bytes_discarded;
+};
+
 /* This struct holds the per-port data */
 struct port {
 	/* Next port in the list, head is in the ports_device */
@@ -179,6 +187,13 @@ struct port {
 	struct dentry *debugfs_file;
 
 	/*
+	 * Keep count of the bytes sent, received and discarded for
+	 * this port for accounting and debugging purposes.  These
+	 * counts are not reset across port open / close events.
+	 */
+	struct port_stats stats;
+
+	/*
 	 * The entries in this struct will be valid if this port is
 	 * hooked up to an hvc console
 	 */
@@ -347,17 +362,19 @@ fail:
 }
 
 /* Callers should take appropriate locks */
-static void *get_inbuf(struct port *port)
+static struct port_buffer *get_inbuf(struct port *port)
 {
 	struct port_buffer *buf;
-	struct virtqueue *vq;
 	unsigned int len;
 
-	vq = port->in_vq;
-	buf = virtqueue_get_buf(vq, &len);
+	if (port->inbuf)
+		return port->inbuf;
+
+	buf = virtqueue_get_buf(port->in_vq, &len);
 	if (buf) {
 		buf->len = len;
 		buf->offset = 0;
+		port->stats.bytes_received += len;
 	}
 	return buf;
 }
@@ -384,32 +401,27 @@ static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf)
 static void discard_port_data(struct port *port)
 {
 	struct port_buffer *buf;
-	struct virtqueue *vq;
-	unsigned int len;
-	int ret;
+	unsigned int err;
 
 	if (!port->portdev) {
 		/* Device has been unplugged.  vqs are already gone. */
 		return;
 	}
-	vq = port->in_vq;
-	if (port->inbuf)
-		buf = port->inbuf;
-	else
-		buf = virtqueue_get_buf(vq, &len);
+	buf = get_inbuf(port);
 
-	ret = 0;
+	err = 0;
 	while (buf) {
-		if (add_inbuf(vq, buf) < 0) {
-			ret++;
+		port->stats.bytes_discarded += buf->len - buf->offset;
+		if (add_inbuf(port->in_vq, buf) < 0) {
+			err++;
 			free_buf(buf);
 		}
-		buf = virtqueue_get_buf(vq, &len);
+		port->inbuf = NULL;
+		buf = get_inbuf(port);
 	}
-	port->inbuf = NULL;
-	if (ret)
+	if (err)
 		dev_warn(port->dev, "Errors adding %d buffers back to vq\n",
-			 ret);
+			 err);
 }
 
 static bool port_has_data(struct port *port)
@@ -417,18 +429,12 @@ static bool port_has_data(struct port *port)
 	unsigned long flags;
 	bool ret;
 
+	ret = false;
 	spin_lock_irqsave(&port->inbuf_lock, flags);
-	if (port->inbuf) {
-		ret = true;
-		goto out;
-	}
 	port->inbuf = get_inbuf(port);
-	if (port->inbuf) {
+	if (port->inbuf)
 		ret = true;
-		goto out;
-	}
-	ret = false;
-out:
+
 	spin_unlock_irqrestore(&port->inbuf_lock, flags);
 	return ret;
 }
@@ -529,6 +535,8 @@ static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count,
 		cpu_relax();
 done:
 	spin_unlock_irqrestore(&port->outvq_lock, flags);
+
+	port->stats.bytes_sent += in_count;
 	/*
 	 * We're expected to return the amount of data we wrote -- all
 	 * of it
@@ -633,8 +641,8 @@ static ssize_t port_fops_read(struct file *filp, char __user *ubuf,
 		if (filp->f_flags & O_NONBLOCK)
 			return -EAGAIN;
 
-		ret = wait_event_interruptible(port->waitqueue,
-					       !will_read_block(port));
+		ret = wait_event_freezable(port->waitqueue,
+					   !will_read_block(port));
 		if (ret < 0)
 			return ret;
 	}
@@ -677,8 +685,8 @@ static ssize_t port_fops_write(struct file *filp, const char __user *ubuf,
 		if (nonblock)
 			return -EAGAIN;
 
-		ret = wait_event_interruptible(port->waitqueue,
-					       !will_write_block(port));
+		ret = wait_event_freezable(port->waitqueue,
+					   !will_write_block(port));
 		if (ret < 0)
 			return ret;
 	}
@@ -1059,6 +1067,14 @@ static ssize_t debugfs_read(struct file *filp, char __user *ubuf,
 	out_offset += snprintf(buf + out_offset, out_count - out_offset,
 			       "outvq_full: %d\n", port->outvq_full);
 	out_offset += snprintf(buf + out_offset, out_count - out_offset,
+			       "bytes_sent: %lu\n", port->stats.bytes_sent);
+	out_offset += snprintf(buf + out_offset, out_count - out_offset,
+			       "bytes_received: %lu\n",
+			       port->stats.bytes_received);
+	out_offset += snprintf(buf + out_offset, out_count - out_offset,
+			       "bytes_discarded: %lu\n",
+			       port->stats.bytes_discarded);
+	out_offset += snprintf(buf + out_offset, out_count - out_offset,
 			       "is_console: %s\n",
 			       is_console_port(port) ? "yes" : "no");
 	out_offset += snprintf(buf + out_offset, out_count - out_offset,
@@ -1143,6 +1159,7 @@ static int add_port(struct ports_device *portdev, u32 id)
 	port->cons.ws.ws_row = port->cons.ws.ws_col = 0;
 
 	port->host_connected = port->guest_connected = false;
+	port->stats = (struct port_stats) { 0 };
 
 	port->outvq_full = false;
 
@@ -1352,6 +1369,7 @@ static void handle_control_message(struct ports_device *portdev,
 			break;
 
 		init_port_console(port);
+		complete(&early_console_added);
 		/*
 		 * Could remove the port here in case init fails - but
 		 * have to notify the host first.
@@ -1394,6 +1412,13 @@ static void handle_control_message(struct ports_device *portdev,
 		break;
 	case VIRTIO_CONSOLE_PORT_NAME:
 		/*
+		 * If we woke up after hibernation, we can get this
+		 * again.  Skip it in that case.
+		 */
+		if (port->name)
+			break;
+
+		/*
 		 * Skip the size of the header and the cpkt to get the size
 		 * of the name that was sent
 		 */
@@ -1481,8 +1506,7 @@ static void in_intr(struct virtqueue *vq)
 		return;
 
 	spin_lock_irqsave(&port->inbuf_lock, flags);
-	if (!port->inbuf)
-		port->inbuf = get_inbuf(port);
+	port->inbuf = get_inbuf(port);
 
 	/*
 	 * Don't queue up data when port is closed.  This condition
@@ -1563,7 +1587,7 @@ static int init_vqs(struct ports_device *portdev)
 	portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
 				   GFP_KERNEL);
 	if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
-			!portdev->out_vqs) {
+	    !portdev->out_vqs) {
 		err = -ENOMEM;
 		goto free;
 	}
@@ -1648,6 +1672,10 @@ static int __devinit virtcons_probe(struct virtio_device *vdev)
 	struct ports_device *portdev;
 	int err;
 	bool multiport;
+	bool early = early_put_chars != NULL;
+
+	/* Ensure to read early_put_chars now */
+	barrier();
 
 	portdev = kmalloc(sizeof(*portdev), GFP_KERNEL);
 	if (!portdev) {
@@ -1675,13 +1703,11 @@ static int __devinit virtcons_probe(struct virtio_device *vdev)
 
 	multiport = false;
 	portdev->config.max_nr_ports = 1;
-	if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) {
+	if (virtio_config_val(vdev, VIRTIO_CONSOLE_F_MULTIPORT,
+			      offsetof(struct virtio_console_config,
+				       max_nr_ports),
+			      &portdev->config.max_nr_ports) == 0)
 		multiport = true;
-		vdev->config->get(vdev, offsetof(struct virtio_console_config,
-						 max_nr_ports),
-				  &portdev->config.max_nr_ports,
-				  sizeof(portdev->config.max_nr_ports));
-	}
 
 	err = init_vqs(portdev);
 	if (err < 0) {
@@ -1719,6 +1745,19 @@ static int __devinit virtcons_probe(struct virtio_device *vdev)
 
 	__send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
 			   VIRTIO_CONSOLE_DEVICE_READY, 1);
+
+	/*
+	 * If there was an early virtio console, assume that there are no
+	 * other consoles. We need to wait until the hvc_alloc matches the
+	 * hvc_instantiate, otherwise tty_open will complain, resulting in
+	 * a "Warning: unable to open an initial console" boot failure.
+	 * Without multiport this is done in add_port above. With multiport
+	 * this might take some host<->guest communication - thus we have to
+	 * wait.
+	 */
+	if (multiport && early)
+		wait_for_completion(&early_console_added);
+
 	return 0;
 
 free_vqs: