Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)

108 files changed, 9 insertions, 93082 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b7980a83ce2..04f8b2d083c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -4,89 +4,7 @@
 
 menu "Character devices"
 
-config VT
-	bool "Virtual terminal" if EXPERT
-	depends on !S390
-	select INPUT
-	default y
-	---help---
-	  If you say Y here, you will get support for terminal devices with
-	  display and keyboard devices. These are called "virtual" because you
-	  can run several virtual terminals (also called virtual consoles) on
-	  one physical terminal. This is rather useful, for example one
-	  virtual terminal can collect system messages and warnings, another
-	  one can be used for a text-mode user session, and a third could run
-	  an X session, all in parallel. Switching between virtual terminals
-	  is done with certain key combinations, usually Alt-<function key>.
-
-	  The setterm command ("man setterm") can be used to change the
-	  properties (such as colors or beeping) of a virtual terminal. The
-	  man page console_codes(4) ("man console_codes") contains the special
-	  character sequences that can be used to change those properties
-	  directly. The fonts used on virtual terminals can be changed with
-	  the setfont ("man setfont") command and the key bindings are defined
-	  with the loadkeys ("man loadkeys") command.
-
-	  You need at least one virtual terminal device in order to make use
-	  of your keyboard and monitor. Therefore, only people configuring an
-	  embedded system would want to say N here in order to save some
-	  memory; the only way to log into such a system is then via a serial
-	  or network connection.
-
-	  If unsure, say Y, or else you won't be able to do much with your new
-	  shiny Linux system :-)
-
-config CONSOLE_TRANSLATIONS
-	depends on VT
-	default y
-	bool "Enable character translations in console" if EXPERT
-	---help---
-	  This enables support for font mapping and Unicode translation
-	  on virtual consoles.
-
-config VT_CONSOLE
-	bool "Support for console on virtual terminal" if EXPERT
-	depends on VT
-	default y
-	---help---
-	  The system console is the device which receives all kernel messages
-	  and warnings and which allows logins in single user mode. If you
-	  answer Y here, a virtual terminal (the device used to interact with
-	  a physical terminal) can be used as system console. This is the most
-	  common mode of operations, so you should say Y here unless you want
-	  the kernel messages be output only to a serial port (in which case
-	  you should say Y to "Console on serial port", below).
-
-	  If you do say Y here, by default the currently visible virtual
-	  terminal (/dev/tty0) will be used as system console. You can change
-	  that with a kernel command line option such as "console=tty3" which
-	  would use the third virtual terminal as system console. (Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel at boot time.)
-
-	  If unsure, say Y.
-
-config HW_CONSOLE
-	bool
-	depends on VT && !S390 && !UML
-	default y
-
-config VT_HW_CONSOLE_BINDING
-       bool "Support for binding and unbinding console drivers"
-       depends on HW_CONSOLE
-       default n
-       ---help---
-         The virtual terminal is the device that interacts with the physical
-         terminal through console drivers. On these systems, at least one
-         console driver is loaded. In other configurations, additional console
-         drivers may be enabled, such as the framebuffer console. If more than
-         1 console driver is enabled, setting this to 'y' will allow you to
-         select the console driver that will serve as the backend for the
-         virtual terminals.
-
-	 See <file:Documentation/console/console.txt> for more
-	 information. For framebuffer console users, please refer to
-	 <file:Documentation/fb/fbcon.txt>.
+source "drivers/tty/Kconfig"
 
 config DEVKMEM
 	bool "/dev/kmem virtual device support"
@@ -97,253 +15,6 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
-config BFIN_JTAG_COMM
-	tristate "Blackfin JTAG Communication"
-	depends on BLACKFIN
-	help
-	  Add support for emulating a TTY device over the Blackfin JTAG.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_jtag_comm.
-
-config BFIN_JTAG_COMM_CONSOLE
-	bool "Console on Blackfin JTAG"
-	depends on BFIN_JTAG_COMM=y
-
-config SERIAL_NONSTANDARD
-	bool "Non-standard serial port support"
-	depends on HAS_IOMEM
-	---help---
-	  Say Y here if you have any non-standard serial boards -- boards
-	  which aren't supported using the standard "dumb" serial driver.
-	  This includes intelligent serial boards such as Cyclades,
-	  Digiboards, etc. These are usually used for systems that need many
-	  serial ports because they serve many terminals or dial-in
-	  connections.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about non-standard serial boards.
-
-	  Most people can say N here.
-
-config COMPUTONE
-	tristate "Computone IntelliPort Plus serial support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	---help---
-	  This driver supports the entire family of Intelliport II/Plus
-	  controllers with the exception of the MicroChannel controllers and
-	  products previous to the Intelliport II. These are multiport cards,
-	  which give you many serial ports. You would need something like this
-	  to connect more than two modems to your Linux box, for instance in
-	  order to become a dial-in server. If you have a card like that, say
-	  Y here and read <file:Documentation/serial/computone.txt>.
-
-	  To compile this driver as module, choose M here: the
-	  module will be called ip2.
-
-config ROCKETPORT
-	tristate "Comtrol RocketPort support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	help
-	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   
-          These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
-          modems.  For information about the RocketPort/RocketModem  boards
-          and this driver read <file:Documentation/serial/rocket.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rocket.
-
-	  If you want to compile this driver into the kernel, say Y here.  If
-          you don't have a Comtrol RocketPort/RocketModem card installed, say N.
-
-config CYCLADES
-	tristate "Cyclades async mux support"
-	depends on SERIAL_NONSTANDARD && (PCI || ISA)
-	select FW_LOADER
-	---help---
-	  This driver supports Cyclades Z and Y multiserial boards.
-	  You would need something like this to connect more than two modems to
-	  your Linux box, for instance in order to become a dial-in server.
-
-	  For information about the Cyclades-Z card, read
-	  <file:Documentation/serial/README.cycladesZ>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cyclades.
-
-	  If you haven't heard about it, it's safe to say N.
-
-config CYZ_INTR
-	bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && CYCLADES
-	help
-	  The Cyclades-Z family of multiport cards allows 2 (two) driver op
-	  modes: polling and interrupt. In polling mode, the driver will check
-	  the status of the Cyclades-Z ports every certain amount of time
-	  (which is called polling cycle and is configurable). In interrupt
-	  mode, it will use an interrupt line (IRQ) in order to check the
-	  status of the Cyclades-Z ports. The default op mode is polling. If
-	  unsure, say N.
-