Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/macintosh/adbhid.c

104 files changed, 2997 insertions, 711 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d8d7125529c..b391776e5bf 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -130,6 +130,7 @@ config ROCKETPORT
 config CYCLADES
 	tristate "Cyclades async mux support"
 	depends on SERIAL_NONSTANDARD && (PCI || ISA)
+	select FW_LOADER
 	---help---
 	  This driver supports Cyclades Z and Y multiserial boards.
 	  You would need something like this to connect more than two modems to
@@ -185,7 +186,7 @@ config ESPSERIAL
 
 config MOXA_INTELLIO
 	tristate "Moxa Intellio support"
-	depends on SERIAL_NONSTANDARD
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
 	help
 	  Say Y here if you have a Moxa Intellio multiport serial card.
 
@@ -241,7 +242,7 @@ config SYNCLINK
 
 config SYNCLINKMP
 	tristate "SyncLink Multiport support"
-	depends on SERIAL_NONSTANDARD
+	depends on SERIAL_NONSTANDARD && PCI
 	help
 	  Enable support for the SyncLink Multiport (2 or 4 ports)
 	  serial adapter, running asynchronous and HDLC communications up
@@ -372,39 +373,6 @@ config ISTALLION
 	  To compile this driver as a module, choose M here: the
 	  module will be called istallion.
 
-config SERIAL_DEC
-	bool "DECstation serial support"
-	depends on MACH_DECSTATION
-	default y
-	help
-	  This selects whether you want to be asked about drivers for
-	  DECstation serial ports.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about DECstation serial ports.
-
-config SERIAL_DEC_CONSOLE
-	bool "Support for console on a DECstation serial port"
-	depends on SERIAL_DEC
-	default y
-	help
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode).  Note that the firmware uses ttyS0 as the serial console on
-	  the Maxine and ttyS2 on the others.
-
-	  If unsure, say Y.
-
-config ZS
-	bool "Z85C30 Serial Support"
-	depends on SERIAL_DEC
-	default y
-	help
-	  Documentation on the Zilog 85C350 serial communications controller
-	  is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>
-
 config A2232
 	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
@@ -637,6 +605,14 @@ config HVC_BEAT
 	help
 	  Toshiba's Cell Reference Set Beat Console device driver
 
+config HVC_XEN
+	bool "Xen Hypervisor Console support"
+	depends on XEN
+	select HVC_DRIVER
+	default y
+	help
+	  Xen virtual console device driver
+
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
 	depends on PPC_PSERIES
@@ -751,7 +727,7 @@ config NVRAM
 
 config RTC
 	tristate "Enhanced Real Time Clock Support"
-	depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH && !S390
+	depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -775,6 +751,28 @@ config RTC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rtc.
 
+config JS_RTC
+	tristate "Enhanced Real Time Clock Support"
+	depends on SPARC32 && PCI
+	---help---
+	  If you say Y here and create a character special file /dev/rtc with
+	  major number 10 and minor number 135 using mknod ("man mknod"), you
+	  will get access to the real time clock (or hardware clock) built
+	  into your computer.
+
+	  Every PC has such a clock built in. It can be used to generate
+	  signals from as low as 1Hz up to 8192Hz, and can also be used
+	  as a 24 hour alarm. It reports status information via the file
+	  /proc/driver/rtc and its behaviour is set by various ioctls on
+	  /dev/rtc.
+
+	  If you think you have a use for such a device (such as periodic data
+	  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+	  for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called js-rtc.
+
 config SGI_DS1286
 	tristate "SGI DS1286 RTC support"
 	depends on SGI_IP22
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index f2996a95eb0..c78ff26647e 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -42,12 +42,14 @@ obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
 obj-$(CONFIG_N_HDLC)		+= n_hdlc.o
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
 obj-$(CONFIG_SX)		+= sx.o generic_serial.o
+obj-$(CONFIG_LGUEST_GUEST)	+= hvc_lguest.o
 obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
 obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
 obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
 obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
+obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o
@@ -95,7 +97,6 @@ obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
 obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
 obj-$(CONFIG_TELCLOCK)		+= tlclk.o
 
-obj-$(CONFIG_WATCHDOG)		+= watchdog/
 obj-$(CONFIG_MWAVE)		+= mwave/
 obj-$(CONFIG_AGP)		+= agp/
 obj-$(CONFIG_DRM)		+= drm/
@@ -105,6 +106,11 @@ obj-$(CONFIG_IPMI_HANDLER)	+= ipmi/
 obj-$(CONFIG_HANGCHECK_TIMER)	+= hangcheck-timer.o
 obj-$(CONFIG_TCG_TPM)		+= tpm/
 
+obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
+
+obj-$(CONFIG_JS_RTC)		+= js-rtc.o
+js-rtc-y = rtc.o
+
 # Files generated that shall be removed upon make clean
 clean-files := consolemap_deftbl.c defkeymap.c
 
@@ -123,7 +129,7 @@ $(obj)/defkeymap.o:  $(obj)/defkeymap.c
 
 ifdef GENERATE_KEYMAP
 
-$(obj)/defkeymap.c $(obj)/%.c: $(src)/%.map
+$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
 	loadkeys --mktable $< > $@.tmp
 	sed -e 's/^static *//' $@.tmp > $@
 	rm $@.tmp
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index a9f9c48c242..713533d8a86 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -50,7 +50,7 @@ config AGP_ATI
 
 config AGP_AMD
 	tristate "AMD Irongate, 761, and 762 chipset support"
-	depends on AGP && X86_32
+	depends on AGP && (X86_32 || ALPHA)
 	help
 	  This option gives you AGP support for the GLX component of
 	  X on AMD Irongate, 761, and 762 chipsets.
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 35ab1a9f8e8..8955e7ff759 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -176,7 +176,7 @@ struct agp_bridge_data {
 #define I830_GMCH_MEM_MASK		0x1
 #define I830_GMCH_MEM_64M		0x1
 #define I830_GMCH_MEM_128M		0
-#define I830_GMCH_GMS_MASK		0xF0
+#define I830_GMCH_GMS_MASK		0x70
 #define I830_GMCH_GMS_DISABLED		0x00
 #define I830_GMCH_GMS_LOCAL		0x10
 #define I830_GMCH_GMS_STOLEN_512	0x20
@@ -190,6 +190,7 @@ struct agp_bridge_data {
 #define INTEL_I830_ERRSTS	0x92
 
 /* Intel 855GM/852GM registers */
+#define I855_GMCH_GMS_MASK		0xF0
 #define I855_GMCH_GMS_STOLEN_0M		0x0
 #define I855_GMCH_GMS_STOLEN_1M		(0x1 << 4)
 #define I855_GMCH_GMS_STOLEN_4M		(0x2 << 4)
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index df0ddf14b85..f60bca70d1f 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -223,6 +223,8 @@ static int amd_irongate_configure(void)
 	pci_read_config_dword(agp_bridge->dev, AMD_MMBASE, &temp);
 	temp = (temp & PCI_BASE_ADDRESS_MEM_MASK);
 	amd_irongate_private.registers = (volatile u8 __iomem *) ioremap(temp, 4096);
+	if (!amd_irongate_private.registers)
+		return -ENOMEM;
 
 	/* Write out the address of the gatt table */
 	writel(agp_bridge->gatt_bus_addr, amd_irongate_private.registers+AMD_ATTBASE);
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 780e59e588a..2d46b713c8f 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -123,21 +123,16 @@ static int ati_create_gatt_pages(int nr_tables)
 
 	for (i = 0; i < nr_tables; i++) {
 		entry = kzalloc(sizeof(struct ati_page_map), GFP_KERNEL);
+		tables[i] = entry;
 		if (entry == NULL) {
-			while (i > 0) {
-				kfree(tables[i-1]);
-				i--;
-			}
-			kfree(tables);
 			retval = -ENOMEM;
 			break;
 		}
-		tables[i] = entry;
 		retval = ati_create_page_map(entry);
 		if (retval != 0)
 			break;
 	}