Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits)
  drm: only trust core drm ioctls - driver ioctls are a mess.
  drm/i915: add support for Intel series 4 chipsets.
  drm/radeon: add hier-z registers for r300 and r500 chipsets
  drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT
  drm/radeon: switch IGP gart to use radeon_write_agp_base()
  drm/radeon: Restore sw interrupt on resume
  drm/r500: add support for AGP based cards.
  drm/radeon: fix texture uploads with large 3d textures (bug 13980)
  drm/radeon: add initial r500 support.
  drm/radeon: init pipe setup in kernel code.
  drm/radeon: fixup radeon_do_engine_reset
  drm/radeon: fix pixcache and purge/cache flushing registers
  drm/radeon: write AGP_BASE_2 on chips that support it.
  drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support
  drm/radeon: IGP clean up register and magic numbers.
  drm/rs690: set base 2 to 0.
  drm/rs690: set all of gart base address.
  radeon: add production microcode from AMD
  drm: pcigart use proper pci map interfaces.
  drm: the sg alloc ioctl should write back the handle to userspace
  ...

13 files changed, 2604 insertions, 1070 deletions

diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c
index b710426bab3..c533d0c9ec6 100644
--- a/drivers/char/drm/ati_pcigart.c
+++ b/drivers/char/drm/ati_pcigart.c
@@ -76,7 +76,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info
 		for (i = 0; i < pages; i++) {
 			if (!entry->busaddr[i])
 				break;
-			pci_unmap_single(dev->pdev, entry->busaddr[i],
+			pci_unmap_page(dev->pdev, entry->busaddr[i],
 					 PAGE_SIZE, PCI_DMA_TODEVICE);
 		}
 
@@ -137,10 +137,8 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga
 
 	for (i = 0; i < pages; i++) {
 		/* we need to support large memory configurations */
-		entry->busaddr[i] = pci_map_single(dev->pdev,
-						   page_address(entry->
-								pagelist[i]),
-						   PAGE_SIZE, PCI_DMA_TODEVICE);
+		entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i],
+						 0, PAGE_SIZE, PCI_DMA_TODEVICE);
 		if (entry->busaddr[i] == 0) {
 			DRM_ERROR("unable to map PCIGART pages!\n");
 			drm_ati_pcigart_cleanup(dev, gart_info);
diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h
index 3a05c6d5ebe..38d3c6b8276 100644
--- a/drivers/char/drm/drm.h
+++ b/drivers/char/drm/drm.h
@@ -628,7 +628,7 @@ struct drm_set_version {
 #define DRM_IOCTL_AGP_BIND		DRM_IOW( 0x36, struct drm_agp_binding)
 #define DRM_IOCTL_AGP_UNBIND		DRM_IOW( 0x37, struct drm_agp_binding)
 
-#define DRM_IOCTL_SG_ALLOC		DRM_IOW( 0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_ALLOC		DRM_IOWR(0x38, struct drm_scatter_gather)
 #define DRM_IOCTL_SG_FREE		DRM_IOW( 0x39, struct drm_scatter_gather)
 
 #define DRM_IOCTL_WAIT_VBLANK		DRM_IOWR(0x3a, union drm_wait_vblank)
diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c
index fc54140551a..564138714bb 100644
--- a/drivers/char/drm/drm_drv.c
+++ b/drivers/char/drm/drm_drv.c
@@ -470,17 +470,18 @@ int drm_ioctl(struct inode *inode, struct file *filp,
 	if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) &&
 	    (nr < DRM_COMMAND_BASE + dev->driver->num_ioctls))
 		ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
-	else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE))
+	else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) {
 		ioctl = &drm_ioctls[nr];
-	else
+		cmd = ioctl->cmd;
+	} else
 		goto err_i1;
 
+	/* Do not trust userspace, use our own definition */
 	func = ioctl->func;
 	/* is there a local override? */
 	if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl)
 		func = dev->driver->dma_ioctl;
 
-
 	if (!func) {
 		DRM_DEBUG("no function\n");
 		retcode = -EINVAL;
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index a6a499f97e2..135bd19499f 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -103,20 +103,18 @@
 	{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
 	{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
-	{0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
 	{0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
-	{0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
 	{0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
@@ -411,4 +409,7 @@
 	{0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0, 0, 0}
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index 1b20f7c0639..d7326d92a23 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -1112,12 +1112,19 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		       (dev)->pci_device == 0x29A2 || \
 		       (dev)->pci_device == 0x2A02 || \
 		       (dev)->pci_device == 0x2A12 || \
-		       (dev)->pci_device == 0x2A42)
+		       (dev)->pci_device == 0x2A42 || \
+		       (dev)->pci_device == 0x2E02 || \
+		       (dev)->pci_device == 0x2E12 || \
+		       (dev)->pci_device == 0x2E22)
 
 #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
 
 #define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42)
 
+#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
+		     (dev)->pci_device == 0x2E12 || \
+		     (dev)->pci_device == 0x2E22)
+
 #define IS_G33(dev)    ((dev)->pci_device == 0x29C2 ||	\
 			(dev)->pci_device == 0x29B2 ||	\
 			(dev)->pci_device == 0x29D2)
@@ -1128,7 +1135,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
 			IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev))
 
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev))
+#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index f535812e405..702df45320f 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -189,18 +189,12 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(R300_RE_CULL_CNTL, 1);
 	ADD_RANGE(0x42C0, 2);
 	ADD_RANGE(R300_RS_CNTL_0, 2);
-	ADD_RANGE(R300_RS_INTERP_0, 8);
-	ADD_RANGE(R300_RS_ROUTE_0, 8);
-	ADD_RANGE(0x43A4, 2);
+
+	ADD_RANGE(R300_SC_HYPERZ, 2);
 	ADD_RANGE(0x43E8, 1);
-	ADD_RANGE(R300_PFS_CNTL_0, 3);
-	ADD_RANGE(R300_PFS_NODE_0, 4);
-	ADD_RANGE(R300_PFS_TEXI_0, 64);
+
 	ADD_RANGE(0x46A4, 5);
-	ADD_RANGE(R300_PFS_INSTR0_0, 64);
-	ADD_RANGE(R300_PFS_INSTR1_0, 64);
-	ADD_RANGE(R300_PFS_INSTR2_0, 64);
-	ADD_RANGE(R300_PFS_INSTR3_0, 64);
+
 	ADD_RANGE(R300_RE_FOG_STATE, 1);
 	ADD_RANGE(R300_FOG_COLOR_R, 3);
 	ADD_RANGE(R300_PP_ALPHA_TEST, 2);
@@ -215,14 +209,12 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(0x4E50, 9);
 	ADD_RANGE(0x4E88, 1);
 	ADD_RANGE(0x4EA0, 2);
-	ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3);
-	ADD_RANGE(R300_RB3D_ZSTENCIL_FORMAT, 4);
-	ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET);	/* check offset */
-	ADD_RANGE(R300_RB3D_DEPTHPITCH, 1);
-	ADD_RANGE(0x4F28, 1);
-	ADD_RANGE(0x4F30, 2);
-	ADD_RANGE(0x4F44, 1);
-	ADD_RANGE(0x4F54, 1);
+	ADD_RANGE(R300_ZB_CNTL, 3);
+	ADD_RANGE(R300_ZB_FORMAT, 4);
+	ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET);	/* check offset */
+	ADD_RANGE(R300_ZB_DEPTHPITCH, 1);
+	ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1);
+	ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13);
 
 	ADD_RANGE(R300_TX_FILTER_0, 16);
 	ADD_RANGE(R300_TX_FILTER1_0, 16);
@@ -235,13 +227,32 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
 
 	/* Sporadic registers used as primitives are emitted */
-	ADD_RANGE(R300_RB3D_ZCACHE_CTLSTAT, 1);
+	ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1);
 	ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
 	ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
 	ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);
 
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
-		ADD_RANGE(0x4074, 16);
+		ADD_RANGE(R500_VAP_INDEX_OFFSET, 1);
+		ADD_RANGE(R500_US_CONFIG, 2);
+		ADD_RANGE(R500_US_CODE_ADDR, 3);
+		ADD_RANGE(R500_US_FC_CTRL, 1);
+		ADD_RANGE(R500_RS_IP_0, 16);
+		ADD_RANGE(R500_RS_INST_0, 16);
+		ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2);
+		ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2);
+		ADD_RANGE(R500_ZB_FIFO_SIZE, 2);
+	} else {
+		ADD_RANGE(R300_PFS_CNTL_0, 3);
+		ADD_RANGE(R300_PFS_NODE_0, 4);
+		ADD_RANGE(R300_PFS_TEXI_0, 64);
+		ADD_RANGE(R300_PFS_INSTR0_0, 64);
+		ADD_RANGE(R300_PFS_INSTR1_0, 64);
+		ADD_RANGE(R300_PFS_INSTR2_0, 64);
+		ADD_RANGE(R300_PFS_INSTR3_0, 64);
+		ADD_RANGE(R300_RS_INTERP_0, 8);
+		ADD_RANGE(R300_RS_ROUTE_0, 8);
+
 	}
 }
 
@@ -707,8 +718,9 @@ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
 	BEGIN_RING(6);
 	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
 	OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
-	OUT_RING(CP_PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
-	OUT_RING(R300_RB3D_ZCACHE_UNKNOWN_03);
+	OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
+	OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
+		 R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
 	OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
 	OUT_RING(0x0);
 	ADVANCE_RING();
@@ -829,6 +841,54 @@ static int r300_scratch(drm_radeon_private_t *dev_priv,
 }
 
 /**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv,
+				       drm_radeon_kcmd_buffer_t *cmdbuf,
+				       drm_r300_cmd_header_t header)
+{
+	int sz;
+	int addr;
+	int type;
+	int clamp;
+	int stride;
+	RING_LOCALS;
+
+	sz = header.r500fp.count;
+	/* address is 9 bits 0 - 8, bit 1 of flags is part of address */
+	addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo;
+
+	type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE);
+	clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP);
+
+	addr |= (type << 16);
+	addr |= (clamp << 17);
+
+	stride = type ? 4 : 6;
+
+	DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type);
+	if (!sz)
+		return 0;
+	if (sz * stride * 4 > cmdbuf->bufsz)
+		return -EINVAL;
+
+	BEGIN_RING(3 + sz * stride);
+	OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr);
+	OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1));
+	OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride);
+
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz * stride * 4;
+	cmdbuf->bufsz -= sz * stride * 4;
+
+	return 0;
+}
+
+
+/**
  * Parses and validates a user-supplied command buffer and emits appropriate
  * commands on the DMA ring buffer.
  * Called by the ioctl handler function radeon_cp_cmdbuf.
@@ -963,6 +1023,19 @@ int r300_do_cp_cmdbuf(struct drm_device *dev,
 			}
 			break;
 
+		case R300_CMD_R500FP:
+			if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+				DRM_ERROR("Calling r500 command on r300 card\n");
+				ret = -EINVAL;
+				goto cleanup;
+			}
+			DRM_DEBUG("R300_CMD_R500FP\n");
+			ret = r300_emit_r500fp(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_r500fp failed\n");
+				goto cleanup;
+			}
+			break;
 		default:
 			DRM_ERROR("bad cmd_type %i at %p\n",
 				  header.header.cmd_type,
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index 8f664af9c4a..a6802f26afc 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -702,6 +702,27 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #		define R300_RS_ROUTE_1_UNKNOWN11         (1 << 11)
 /* END: Rasterization / Interpolators - many guesses */
 
+/* Hierarchical Z Enable */
+#define R300_SC_HYPERZ                   0x43a4
+#	define R300_SC_HYPERZ_DISABLE     (0 << 0)
+#	define R300_SC_HYPERZ_ENABLE      (1 << 0)
+#	define R300_SC_HYPERZ_MIN         (0 << 1)
+#	define R300_SC_HYPERZ_MAX         (1 << 1)
+#	define R300_SC_HYPERZ_ADJ_256     (0 << 2)
+#	define R300_SC_HYPERZ_ADJ_128     (1 << 2)
+#	define R300_SC_HYPERZ_ADJ_64      (2 << 2)
+#	define R300_SC_HYPERZ_ADJ_32      (3 << 2)
+#	define R300_SC_HYPERZ_ADJ_16      (4 << 2)
+#	define R300_SC_HYPERZ_ADJ_8       (5 << 2)
+#	define R300_SC_HYPERZ_ADJ_4       (6 << 2)
+#	define R300_SC_HYPERZ_ADJ_2       (7 << 2)
+#	define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5)
+#	define R300_SC_HYPERZ_HZ_Z0MIN    (1 << 5)
+#	define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6)
+#	define R300_SC_HYPERZ_HZ_Z0MAX    (1 << 6)
+
+#define R300_SC_EDGERULE                 0x43a8
+
 /* BEGIN: Scissors and cliprects */
 
 /* There are four clipping rectangles. Their corner coordinates are inclusive.
@@ -1346,7 +1367,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 /* Guess by Vladimir.
  * Set to 0A before 3D operations, set to 02 afterwards.
  */
-#define R300_RB3D_DSTCACHE_CTLSTAT          0x4E4C
+/*#define R300_RB3D_DSTCACHE_CTLSTAT          0x4E4C*/
 #       define R300_RB3D_DSTCACHE_UNKNOWN_02             0x00000002
 #       define R300_RB3D_DSTCACHE_UNKNOWN_0A             0x0000000A
 
@@ -1355,19 +1376,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  * for this.
  * Bit (1<<8) is the "test" bit. so plain write is 6  - vd
  */
-#define R300_RB3D_ZSTENCIL_CNTL_0                   0x4F00
-#       define R300_RB3D_Z_DISABLED_1            0x00000010
-#       define R300_RB3D_Z_DISABLED_2            0x00000014
-#       define R300_RB3D_Z_TEST                  0x00000012
-#       define R300_RB3D_Z_TEST_AND_WRITE        0x00000016
-#       define R300_RB3D_Z_WRITE_ONLY		 0x00000006
-
-#       define R300_RB3D_Z_TEST                  0x00000012
-#       define R300_RB3D_Z_TEST_AND_WRITE        0x00000016
-#       define R300_RB3D_Z_WRITE_ONLY		 0x00000006
-#	define R300_RB3D_STENCIL_ENABLE		 0x00000001
-
-#define R300_RB3D_ZSTENCIL_CNTL_1                   0x4F04
+#define R300_ZB_CNTL                             0x4F00
+#	define R300_STENCIL_ENABLE		 (1 << 0)
+#	define R300_Z_ENABLE		         (1 << 1)
+#	define R300_Z_WRITE_ENABLE		 (1 << 2)
+#	define R300_Z_SIGNED_COMPARE		 (1 << 3)
+#	define R300_STENCIL_FRONT_BACK		 (1 << 4)
+
+#define R300_ZB_ZSTENCILCNTL                   0x4f04
 	/* functions */
 #	define R300_ZS_NEVER			0
 #	define R300_ZS_LESS			1
@@ -1387,52 +1403,166 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #	define R300_ZS_INVERT			5
 #	define R300_ZS_INCR_WRAP		6
 #	define R300_ZS_DECR_WRAP		7
+#	define R300_Z_FUNC_SHIFT		0
 	/* front and back refer to operations done for front
 	   and back faces, i.e. separate stencil function support */
-#	define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT		0
-#	define R300_RB3D_ZS1_FRONT_FUNC_SHIFT		3
-#	define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT	6
-#	define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT	9
-#	define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT      12
-#	define R300_RB3D_ZS1_BACK_FUNC_SHIFT           15
-#	define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT        18
-#	define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT       21
-#	define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT       24
-
-#define R300_RB3D_ZSTENCIL_CNTL_2                   0x4F08
-#	define R300_RB3D_ZS2_STENCIL_REF_SHIFT		0
-#	define R300_RB3D_ZS2_STENCIL_MASK		0xFF
-#	define R300_RB3D_ZS2_STENCIL_MASK_SHIFT	        8
-#	define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT	16
+#	define R300_S_FRONT_FUNC_SHIFT	        3
+#	define R300_S_FRONT_SFAIL_OP_SHIFT	6
+#	define R300_S_FRONT_ZPASS_OP_SHIFT	9
+#	define R300_S_FRONT_ZFAIL_OP_SHIFT      12
+#	define R300_S_BACK_FUNC_SHIFT           15
+#	define R300_S_BACK_SFAIL_OP_SHIFT       18
+#	define R300_S_BACK_ZPASS_OP_SHIFT       21
+#	define R300_S_BACK_ZFAIL_OP_SHIFT       24
+
+#define R300_ZB_STENCILREFMASK                        0x4f08
+#	define R300_STENCILREF_SHIFT       0
+#	define R300_STENCILREF_MASK        0x000000ff
+#	define R300_STENCILMASK_SHIFT      8
+#	define R300_STENCILMASK_MASK       0x0000ff00
+#	define R300_STENCILWRITEMASK_SHIFT 16
+#	define R300_STENCILWRITEMASK_MASK  0x00ff0000
 
 /* gap */
 
-#define R300_RB3D_ZSTENCIL_FORMAT                   0x4F10
-#	define R300_DEPTH_FORMAT_16BIT_INT_Z     (0 << 0)
-#	define R300_DEPTH_FORMAT_24BIT_INT_Z     (2 << 0)
-	/* 16 bit format or some aditional bit ? */
-#	define R300_DEPTH_FORMAT_UNK32          (32 << 0)
+#define R300_ZB_FORMAT                             0x4f10
+#	define R300_DEPTHFORMAT_16BIT_INT_Z   (0 << 0)
+#	define R300_DEPTHFORMAT_16BIT_13E3    (1 << 0)
+#	define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL   (2 << 0)
+/* reserved up to (15 << 0) */
+#	define R300_INVERT_13E3_LEADING_ONES  (0 << 4)
+#	define R300_INVERT_13E3_LEADING_ZEROS (1 << 4)
 
-#define R300_RB3D_EARLY_Z                           0x4F14
-#	define R300_EARLY_Z_DISABLE              (0 << 0)
-#	define R300_EARLY_Z_ENABLE               (1 << 0)
+#define R300_ZB_ZTOP                             0x4F14
+#	define R300_ZTOP_DISABLE                 (0 << 0)
+#	define R300_ZTOP_ENABLE                  (1 << 0)
 
 /* gap */
 
-#define R300_RB3D_ZCACHE_CTLSTAT            0x4F18 /* GUESS */
-#       define R300_RB3D_ZCACHE_UNKNOWN_01  0x1
-#       define R300_RB3D_ZCACHE_UNKNOWN_03  0x3
+#define R300_ZB_ZCACHE_CTLSTAT            0x4f18
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT      (0 << 0)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT       (0 << 1)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE            (1 << 1)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE            (0 << 31)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY            (1 << 31)
+
+#define R300_ZB_BW_CNTL                     0x4f1c
+#	define R300_HIZ_DISABLE                              (0 << 0)
+#	define R300_HIZ_ENABLE                               (1 << 0)
+#	define R300_HIZ_MIN                                  (0 << 1)
+#	define R300_HIZ_MAX                                  (1 << 1)
+#	define R300_FAST_FILL_DISABLE                        (0 << 2)
+#	define R300_FAST_FILL_ENABLE                         (1 << 2)
+#	define R300_RD_COMP_DISABLE                          (0 << 3)
+#	define R300_RD_COMP_ENABLE                           (1 << 3)
+#	define R300_WR_COMP_DISABLE                          (0 << 4)
+#	define R300_WR_COMP_ENABLE                           (1 << 4)
+#	define R300_ZB_CB_CLEAR_RMW                          (0 << 5)
+#	define R300_ZB_CB_CLEAR_CACHE_LINEAR                 (1 << 5)
+#	define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE   (0 << 6)
+#	define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE    (1 << 6)
+
+#	define R500_ZEQUAL_OPTIMIZE_ENABLE                   (0 << 7)
+#	define R500_ZEQUAL_OPTIMIZE_DISABLE                  (1 << 7)
+#	define R500_SEQUAL_OPTIMIZE_ENABLE                   (0 << 8)
+#	define R500_SEQUAL_OPTIMIZE_DISABLE                  (1 << 8)
+
+#	define R500_BMASK_ENABLE                             (0 << 10)
+#	define R500_BMASK_DISABLE                            (1 << 10)
+#	define R500_HIZ_EQUAL_REJECT_DISABLE                 (0 << 11)
+#	define R500_HIZ_EQUAL_REJECT_ENABLE                  (1 << 11)
+#	define R500_HIZ_FP_EXP_BITS_DISABLE                  (0 << 12)
+#	define R500_HIZ_FP_EXP_BITS_1                        (1 << 12)
+#	define R500_HIZ_FP_EXP_BITS_2                        (2 << 12)
+#	define R500_HIZ_FP_EXP_BITS_3                        (3 << 12)
+#	define R500_HIZ_FP_EXP_BITS_4                        (4 << 12)
+#	define R500_HIZ_FP_EXP_BITS_5                        (5 << 12)
+#	define R500_HIZ_FP_INVERT_LEADING_ONES               (0 << 15)
+#	define R500_HIZ_FP_INVERT_LEADING_ZEROS              (1 << 15)
+#	define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE      (0 << 16)
+#	define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE     (1 << 16)
+#	define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE           (0 << 17)
+#	define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE          (1 << 17)
+#	define R500_PEQ_PACKING_DISABLE                      (0 << 18)
+#	define R500_PEQ_PACKING_ENABLE                       (1 << 18)
+#	define R500_COVERED_PTR_MASKING_DISABLE              (0 << 18)
+#	define R500_COVERED_PTR_MASKING_ENABLE               (1 << 18)
+
 
 /* gap */
 
-#define R300_RB3D_DEPTHOFFSET               0x4F20
-#define R300_RB3D_DEPTHPITCH                0x4F24
-#       define R300_DEPTHPITCH_MASK              0x00001FF8 /* GUESS */
-#       define R300_DEPTH_TILE_ENABLE            (1 << 16) /* GUESS */
-#       define R300_DEPTH_MICROTILE_ENABLE       (1 << 17) /* GUESS */
-#       define R300_DEPTH_ENDIAN_NO_SWAP         (0 << 18) /* GUESS */
-#       define R300_DEPTH_ENDIAN_WORD_SWAP       (1 << 18) /* GUESS */
-#       define R300_DEPTH_ENDIAN_DWORD_SWAP      (2 << 18) /* GUESS */
+/* Z Buffer Address Offset.
+ * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles.
+ */
+#define R300_ZB_DEPTHOFFSET               0x4f20
+
+/* Z Buffer Pitch and Endian Control */
+#define R300_ZB_DEPTHPITCH                0x4f24
+#       define R300_DEPTHPITCH_MASK              0x00003FFC
+#       define R300_DEPTHMACROTILE_DISABLE      (0 << 16)
+#       define R300_DEPTHMACROTILE_ENABLE       (1 << 16)
+#       define R300_DEPTHMICROTILE_LINEAR       (0 << 17)
+#       define R300_DEPTHMICROTILE_TILED        (1 << 17)
+#       define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
+#       define R300_DEPTHENDIAN_NO_SWAP         (0 << 18)
+#       define R300_DEPTHENDIAN_WORD_SWAP       (1 << 18)
+#       define R300_DEPTHENDIAN_DWORD_SWAP      (2 << 18)
+#       define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)
+
+/* Z Buffer Clear Value */
+#define R300_ZB_DEPTHCLEARVALUE                  0x4f28
+
+#define R300_ZB_ZMASK_OFFSET			 0x4f30
+#define R300_ZB_ZMASK_PITCH			 0x4f34
+#define R300_ZB_ZMASK_WRINDEX			 0x4f38
+#define R300_ZB_ZMASK_DWORD			 0x4f3c
+#define R300_ZB_ZMASK_RDINDEX			 0x4f40
+
+/* Hierarchical Z Memory Offset */
+#define R300_ZB_HIZ_OFFSET                       0x4f44
+
+/* Hierarchical Z Write Index */
+#define R300_ZB_HIZ_WRINDEX                      0x4f48
+
+/* Hierarchical Z Data */
+#define R300_ZB_HIZ_DWORD                        0x4f4c
+
+/* Hierarchical Z Read Index */
+#define R300_ZB_HIZ_RDINDEX                      0x4f50
+
+/* Hierarchical Z Pitch */
+#define R300_ZB_HIZ_PITCH                        0x4f54
+
+/* Z Buffer Z Pass Counter Data */
+#define R300_ZB_ZPASS_DATA                       0x4f58
+
+/* Z Buffer Z Pass Counter Address */
+#define R300_ZB_ZPASS_ADDR                       0x4f5c
+
+/* Depth buffer X and Y coordinate offset */
+#define R300_ZB_DEPTHXY_OFFSET                   0x4f60
+#	define R300_DEPTHX_OFFSET_SHIFT  1
+#	define R300_DEPTHX_OFFSET_MASK   0x000007FE
+#	define R300_DEPTHY_OFFSET_SHIFT  17
+#	define R300_DEPTHY_OFFSET_MASK   0x07FE0000
+
+/* Sets the fifo sizes */
+#define R500_ZB_FIFO_SIZE                        0x4fd0
+#	define R500_OP_FIFO_SIZE_FULL   (0 << 0)
+#	define R500_OP_FIFO_SIZE_HALF   (1 << 0)
+#	define R500_OP_FIFO_SIZE_QUATER (2 << 0)
+#	define R500_OP_FIFO_SIZE_EIGTHS (4 << 0)
+
+/* Stencil Reference Value and Mask for backfacing quads */
+/* R300_ZB_STENCILREFMASK handles front face */
+#define R500_ZB_STENCILREFMASK_BF                0x4fd4
+#	define R500_STENCILREF_SHIFT       0
+#	define R500_STENCILREF_MASK        0x000000ff
+#	define R500_STENCILMASK_SHIFT      8
+#	define R500_STENCILMASK_MASK       0x0000ff00
+#	define R500_STENCILWRITEMASK_SHIFT 16
+#	define R500_STENCILWRITEMASK_MASK  0x00ff0000
 
 /* BEGIN: Vertex program instruction set */
 
@@ -1623,4 +1753,20 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 #define R300_CP_CMD_BITBLT_MULTI	0xC0009B00
 
+#define R500_VAP_INDEX_OFFSET		0x208c
+
+#define R500_GA_US_VECTOR_INDEX         0x4250
+#define R500_GA_US_VECTOR_DATA          0x4254
+
+#define R500_RS_IP_0                    0x4074
+#define R500_RS_INST_0                  0x4320
+
+#define R500_US_CONFIG                  0x4600
+
+#define R500_US_FC_CTRL			0x4624
+#define R500_US_CODE_ADDR		0x4630
+
+#define R500_RB3D_COLOR_CLEAR_VALUE_AR  0x46c0
+#define R500_RB3D_CONSTANT_COLOR_AR     0x4ef8
+
 #endif /* _R300_REG_H */
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index f6f6c92bf77..e53158f0ecb 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -2,6 +2,7 @@
 /*
  * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
  * Copyright 2000 VA Linux Systems, Inc., Fremont, California.
+ * Copyright 2007 Advanced Micro Devices, Inc.
  * All Rights Reserved.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
@@ -34,789 +35,13 @@
 #include "radeon_drv.h"
 #include "r300_reg.h"
 
+#include "radeon_microcode.h"
+
 #define RADEON_FIFO_DEBUG	0
 
 static int radeon_do_cleanup_cp(struct drm_device * dev);
 
-/* CP microcode (from ATI) */
-static const u32 R200_cp_microcode[][2] = {
-	{0x21007000, 0000000000},
-	{0x20007000, 0000000000},
-	{0x000000ab, 0x00000004},
-	{0x000000af, 0x00000004},
-	{0x66544a49, 0000000000},
-	{0x49494174, 0000000000},
-	{0x54517d83, 0000000000},
-	{0x498d8b64, 0000000000},
-	{0x49494949, 0000000000},
-	{0x49da493c, 0000000000},
-	{0x49989898, 0000000000},
-	{0xd34949d5, 0000000000},
-	{0x9dc90e11, 0000000000},
-	{0xce9b9b9b, 0000000000},
-	{0x000f0000, 0x00000016},
-	{0x352e232c, 0000000000},
-	{0x00000013, 0x00000004},
-	{0x000f0000, 0x00000016},
-	{0x352e272c, 0000000000},
-	{0x000f0001, 0x00000016},
-	{0x3239362f, 0000000000},
-	{0x000077ef, 0x00000002},
-	{0x00061000, 0x00000002},
-	{0x00000020, 0x0000001a},
-	{0x00004000, 0x0000001e},
-	{0x00061000, 0x00000002},
-	{0x00000020, 0x0000001a},
-	{0x00004000, 0x0000001e},
-	{0x00061000, 0x00000002},
-	{0x00000020, 0x0000001a},
-	{0x00004000, 0x0000001e},
-	{0x00000016, 0x00000004},
-	{0x0003802a, 0x00000002},
-	{0x040067e0, 0x00000002},
-	{0x00000016, 0x00000004},
-	{0x000077e0, 0x00000002},
-	{0x00065000, 0x00000002},
-	{0x000037e1, 0x00000002},
-	{0x040067e1, 0x00000006},
-	{0x000077e0, 0x00000002},
-	{0x000077e1, 0x00000002},
-	{0x000077e1, 0x00000006},
-	{0xffffffff, 0000000000},
-	{0x10000000, 0000000000},
-	{0x0003802a, 0x00000002},
-	{0x040067e0, 0x00000006},
-	{0x00007675, 0x00000002},
-	{0x00007676, 0x00000002},
-	{0x00007677, 0x00000002},
-	{0x00007678, 0x00000006},
-	{0x0003802b, 0x00000002},
-	{0x04002676, 0x00000002},
-	{0x00007677, 0x00000002},
-	{0x00007678, 0x00000006},
-	{0x0000002e, 0x00000018},
-	{0x0000002e, 0x00000018},
-	{0000000000, 0x00000006},
-	{0x0000002f, 0x00000018},
-	{0x0000002f, 0x00000018},
-	{0000000000, 0x00000006},
-	{0x01605000, 0x00000002},
-	{0x00065000, 0x00000002},
-	{0x00098000, 0x00000002},
-	{0x00061000, 0x00000002},
-	{0x64c0603d, 0x00000004},
-	{0x00080000, 0x00000016},
-	{0000000000, 0000000000},
-	{0x0400251d, 0x00000002},
-	{0x00007580, 0x00000002},
-	{0x00067581, 0x00000002},
-	{0x04002580, 0x00000002},
-	{0x00067581, 0x00000002},
-	{0x00000046, 0x00000004},
-	{0x00005000, 0000000000},
-	{0x00061000, 0x00000002},
-	{0x0000750e, 0x00000002},
-	{0x00019000, 0x00000002},
-	{0x00011055, 0x00000014},
-	{0x00000055, 0x00000012},
-	{0x0400250f, 0x00000002},
-	{0x0000504a, 0x00000004},
-	{0x00007565, 0x00000002},
-	{0x00007566, 0x00000002},
-	{0x00000051, 0x00000004},
-	{0x01e655b4, 0x00000002},
-	{0x4401b0dc, 0x00000002},
-	{0x01c110dc, 0x00000002},
-	{0x2666705d, 0x00000018},
-	{0x040c2565, 0x00000002},
-	{0x0000005d, 0x00000018},
-	{0x04002564, 0x00000002},
-	{0x00007566, 0x00000002},
-	{0x00000054, 0x00000004},
-	{0x00401060, 0x00000008},
-	{0x00101000, 0x00000002},
-	{0x000d80ff, 0x00000002},
-	{0x00800063, 0x00000008},
-	{0x000f9000, 0x00000002},
-	{0x000e00ff, 0x00000002},
-	{0000000000, 0x00000006},
-	{0x00000080, 0x00000018},
-	{0x00000054, 0x00000004},
-	{0x00007576, 0x00000002},
-	{0x00065000, 0x00000002},
-	{0x00009000, 0x00000002},
-	{0x00041000, 0x00000002},
-	{0x0c00350e, 0x00000002},
-	{0x00049000, 0x00000002},
-	{0x00051000, 0x00000002},
-	{0x01e785f8, 0x00000002},
-	{0x00200000, 0x00000002},
-	{0x00600073, 0x0000000c},
-	{0x00007563, 0x00000002},
-	{0x006075f0, 0x00000021},
-	{0x20007068, 0x00000004},
-	{0x00005068, 0x00000004},
-	{0x00007576, 0x00000002},
-	{0x00007577, 0x00000002},
-	{0x0000750e, 0x00000002},
-	{0x0000750f, 0x00000002},
-	{0x00a05000, 0x00000002},
-	{0x00600076, 0x0000000c},
-	{0x006075f0, 0x00000021},
-	{0x000075f8, 0x00000002},
-	{0x00000076, 0x00000004},
-	{0x000a750e, 0x00000002},
-	{0x0020750f, 0x00000002},
-	{0x00600079, 0x00000004},
-	{0x00007570, 0x00000002},
-	{0x00007571, 0x00000002},
-	{0x00007572, 0x00000006},
-	{0x00005000, 0x00000002},
-	{0x00a05000, 0x00000002},
-	{0x00007568, 0x00000002},
-	{0x00061000, 0x00000002},
-	{0x00000084, 0x0000000c},
-	{0x00058000, 0x00000002},
-	{0x0c607562, 0x00000002},
-	{0x00000086, 0x00000004},
-	{0x00600085, 0x00000004},
-	{0x400070dd, 0000000000},
-	{0x000380dd, 0x00000002},
-	{0x00000093, 0x0000001c},
-	{0x00065095, 0x00000018},
-	{0x040025bb, 0x00000002},
-	{0x00061096, 0x00000018},
-	{0x040075bc, 0000000000},
-	{0x000075bb, 0x00000002},
-	{0x000075bc, 0000000000},
-	{0x00090000, 0x00000006},
-	{0x00090000, 0x00000002},
-	{0x000d8002, 0x00000006},
-	{0x00005000, 0x00000002},
-	{0x00007821, 0x00000002},
-	{0x00007800, 0000000000},
-	{0x00007821, 0x00000002},
-	{0x00007800, 0000000000},
-	{0x01665000, 0x00000002},
-	{0x000a0000, 0x00000002},
-	{0x000671cc, 0x00000002},
-	{0x0286f1cd, 0x00000002},
-	{0x000000a3, 0x00000010},
-	{0x21007000, 0000000000},
-	{0x000000aa, 0x0000001c},
-	{0x00065000, 0x00000002},
-	{0x000a0000, 0x00000002},
-	{0x00061000, 0x00000002},
-	{0x000b0000, 0x00000002},
-	{0x38067000, 0x00000002},
-	{0x000a00a6, 0x00000004},
-	{0x20007000, 0000000000},
-	{0x01200000, 0x00000002},
-	{0x20077000, 0x00000002},
-	{0x01200000, 0x00000002},
-	{0x20007000, 0000000000},
-	{0x00061000, 0x00000002},
-	{0x0120751b, 0x00000002},
-	{0x8040750a, 0x00000002},
-	{0x8040750b, 0x00000002},
-	{0x00110000, 0x00000002},
-	{0x000380dd, 0x00000002},
-	{0x000000bd, 0x0000001c},
-	{0x00061096, 0x00000018},
-	{0x844075bd, 0x00000002},
-	{0x00061095, 0x00000018},
-	{0x840075bb, 0x00000002},
-	{0x00061096, 0x00000018},
-	{0x844075bc, 0x00000002},
-	{0x000000c0, 0x00000004},
-	{0x804075bd, 0x00000002},
-	{0x800075bb, 0x00000002},
-	{0x804075bc, 0x00000002},
-	{0x00108000, 0x00000002},
-	{0x01400000, 0x00000002},
-	{0x006000c4, 0x0000000c},
-	{0x20c07000, 0x00000020},
-	{0x000000c6, 0x00000012},
-	{0x00800000, 0x00000006},
-	{0x0080751d, 0x00000006},
-	{0x000025bb, 0x00000002},
-	{0x000040c0, 0x00000004},
-	{0x0000775c, 0x00000002},
-	{0x00a05000, 0x00000002},
-	{0x00661000, 0x00000002},
-	{0x0460275d, 0x00000020},
-	{0x00004000, 0000000000},
-	{0x00007999, 0x00000002},
-	{0x00a05000, 0x00000002},
-	{0x00661000, 0x00000002