diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/char/synclinkmp.c |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/char/synclinkmp.c')
-rw-r--r-- | drivers/char/synclinkmp.c | 5671 |
1 files changed, 5671 insertions, 0 deletions
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c new file mode 100644 index 00000000000..ec949e4c070 --- /dev/null +++ b/drivers/char/synclinkmp.c @@ -0,0 +1,5671 @@ +/* + * $Id: synclinkmp.c,v 4.34 2005/03/04 15:07:10 paulkf Exp $ + * + * Device driver for Microgate SyncLink Multiport + * high speed multiprotocol serial adapter. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * Derived from serial.c written by Theodore Ts'o and Linus Torvalds + * This code is released under the GNU General Public License (GPL) + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) +#if defined(__i386__) +# define BREAKPOINT() asm(" int $3"); +#else +# define BREAKPOINT() { } +#endif + +#define MAX_DEVICES 12 + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/major.h> +#include <linux/string.h> +#include <linux/fcntl.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <asm/serial.h> +#include <linux/delay.h> +#include <linux/ioctl.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/dma.h> +#include <linux/bitops.h> +#include <asm/types.h> +#include <linux/termios.h> +#include <linux/workqueue.h> +#include <linux/hdlc.h> + +#ifdef CONFIG_HDLC_MODULE +#define CONFIG_HDLC 1 +#endif + +#define GET_USER(error,value,addr) error = get_user(value,addr) +#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 +#define PUT_USER(error,value,addr) error = put_user(value,addr) +#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 + +#include <asm/uaccess.h> + +#include "linux/synclink.h" + +static MGSL_PARAMS default_params = { + MGSL_MODE_HDLC, /* unsigned long mode */ + 0, /* unsigned char loopback; */ + HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ + HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ + 0, /* unsigned long clock_speed; */ + 0xff, /* unsigned char addr_filter; */ + HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ + HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ + HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ + 9600, /* unsigned long data_rate; */ + 8, /* unsigned char data_bits; */ + 1, /* unsigned char stop_bits; */ + ASYNC_PARITY_NONE /* unsigned char parity; */ +}; + +/* size in bytes of DMA data buffers */ +#define SCABUFSIZE 1024 +#define SCA_MEM_SIZE 0x40000 +#define SCA_BASE_SIZE 512 +#define SCA_REG_SIZE 16 +#define SCA_MAX_PORTS 4 +#define SCAMAXDESC 128 + +#define BUFFERLISTSIZE 4096 + +/* SCA-I style DMA buffer descriptor */ +typedef struct _SCADESC +{ + u16 next; /* lower l6 bits of next descriptor addr */ + u16 buf_ptr; /* lower 16 bits of buffer addr */ + u8 buf_base; /* upper 8 bits of buffer addr */ + u8 pad1; + u16 length; /* length of buffer */ + u8 status; /* status of buffer */ + u8 pad2; +} SCADESC, *PSCADESC; + +typedef struct _SCADESC_EX +{ + /* device driver bookkeeping section */ + char *virt_addr; /* virtual address of data buffer */ + u16 phys_entry; /* lower 16-bits of physical address of this descriptor */ +} SCADESC_EX, *PSCADESC_EX; + +/* The queue of BH actions to be performed */ + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 + +#define IO_PIN_SHUTDOWN_LIMIT 100 + +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* + * Device instance data structure + */ +typedef struct _synclinkmp_info { + void *if_ptr; /* General purpose pointer (used by SPPP) */ + int magic; + int flags; + int count; /* count of opens */ + int line; + unsigned short close_delay; + unsigned short closing_wait; /* time to wait before closing */ + + struct mgsl_icount icount; + + struct tty_struct *tty; + int timeout; + int x_char; /* xon/xoff character */ + int blocked_open; /* # of blocked opens */ + u16 read_status_mask1; /* break detection (SR1 indications) */ + u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */ + unsigned char ignore_status_mask1; /* break detection (SR1 indications) */ + unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */ + unsigned char *tx_buf; + int tx_put; + int tx_get; + int tx_count; + + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; /* HDLC transmit timeout timer */ + struct _synclinkmp_info *next_device; /* device list link */ + struct timer_list status_timer; /* input signal status check timer */ + + spinlock_t lock; /* spinlock for synchronizing with ISR */ + struct work_struct task; /* task structure for scheduling bh */ + + u32 max_frame_size; /* as set by device config */ + + u32 pending_bh; + + int bh_running; /* Protection from multiple */ + int isr_overflow; + int bh_requested; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *buffer_list; /* virtual address of Rx & Tx buffer lists */ + unsigned long buffer_list_phys; + + unsigned int rx_buf_count; /* count of total allocated Rx buffers */ + SCADESC *rx_buf_list; /* list of receive buffer entries */ + SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */ + unsigned int current_rx_buf; + + unsigned int tx_buf_count; /* count of total allocated Tx buffers */ + SCADESC *tx_buf_list; /* list of transmit buffer entries */ + SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */ + unsigned int last_tx_buf; + + unsigned char *tmp_rx_buf; + unsigned int tmp_rx_buf_count; + + int rx_enabled; + int rx_overflow; + + int tx_enabled; + int tx_active; + u32 idle_mode; + + unsigned char ie0_value; + unsigned char ie1_value; + unsigned char ie2_value; + unsigned char ctrlreg_value; + unsigned char old_signals; + + char device_name[25]; /* device instance name */ + + int port_count; + int adapter_num; + int port_num; + + struct _synclinkmp_info *port_array[SCA_MAX_PORTS]; + + unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ + + unsigned int irq_level; /* interrupt level */ + unsigned long irq_flags; + int irq_requested; /* nonzero if IRQ requested */ + + MGSL_PARAMS params; /* communications parameters */ + + unsigned char serial_signals; /* current serial signal states */ + + int irq_occurred; /* for diagnostics use */ + unsigned int init_error; /* Initialization startup error */ + + u32 last_mem_alloc; + unsigned char* memory_base; /* shared memory address (PCI only) */ + u32 phys_memory_base; + int shared_mem_requested; + + unsigned char* sca_base; /* HD64570 SCA Memory address */ + u32 phys_sca_base; + u32 sca_offset; + int sca_base_requested; + + unsigned char* lcr_base; /* local config registers (PCI only) */ + u32 phys_lcr_base; + u32 lcr_offset; + int lcr_mem_requested; + + unsigned char* statctrl_base; /* status/control register memory */ + u32 phys_statctrl_base; + u32 statctrl_offset; + int sca_statctrl_requested; + + u32 misc_ctrl_value; + char flag_buf[MAX_ASYNC_BUFFER_SIZE]; + char char_buf[MAX_ASYNC_BUFFER_SIZE]; + BOOLEAN drop_rts_on_tx_done; + + struct _input_signal_events input_signal_events; + + /* SPPP/Cisco HDLC device parts */ + int netcount; + int dosyncppp; + spinlock_t netlock; + +#ifdef CONFIG_HDLC + struct net_device *netdev; +#endif + +} SLMP_INFO; + +#define MGSL_MAGIC 0x5401 + +/* + * define serial signal status change macros + */ +#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */ +#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */ +#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */ +#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */ + +/* Common Register macros */ +#define LPR 0x00 +#define PABR0 0x02 +#define PABR1 0x03 +#define WCRL 0x04 +#define WCRM 0x05 +#define WCRH 0x06 +#define DPCR 0x08 +#define DMER 0x09 +#define ISR0 0x10 +#define ISR1 0x11 +#define ISR2 0x12 +#define IER0 0x14 +#define IER1 0x15 +#define IER2 0x16 +#define ITCR 0x18 +#define INTVR 0x1a +#define IMVR 0x1c + +/* MSCI Register macros */ +#define TRB 0x20 +#define TRBL 0x20 +#define TRBH 0x21 +#define SR0 0x22 +#define SR1 0x23 +#define SR2 0x24 +#define SR3 0x25 +#define FST 0x26 +#define IE0 0x28 +#define IE1 0x29 +#define IE2 0x2a +#define FIE 0x2b +#define CMD 0x2c +#define MD0 0x2e +#define MD1 0x2f +#define MD2 0x30 +#define CTL 0x31 +#define SA0 0x32 +#define SA1 0x33 +#define IDL 0x34 +#define TMC 0x35 +#define RXS 0x36 +#define TXS 0x37 +#define TRC0 0x38 +#define TRC1 0x39 +#define RRC 0x3a +#define CST0 0x3c +#define CST1 0x3d + +/* Timer Register Macros */ +#define TCNT 0x60 +#define TCNTL 0x60 +#define TCNTH 0x61 +#define TCONR 0x62 +#define TCONRL 0x62 +#define TCONRH 0x63 +#define TMCS 0x64 +#define TEPR 0x65 + +/* DMA Controller Register macros */ +#define DARL 0x80 +#define DARH 0x81 +#define DARB 0x82 +#define BAR 0x80 +#define BARL 0x80 +#define BARH 0x81 +#define BARB 0x82 +#define SAR 0x84 +#define SARL 0x84 +#define SARH 0x85 +#define SARB 0x86 +#define CPB 0x86 +#define CDA 0x88 +#define CDAL 0x88 +#define CDAH 0x89 +#define EDA 0x8a +#define EDAL 0x8a +#define EDAH 0x8b +#define BFL 0x8c +#define BFLL 0x8c +#define BFLH 0x8d +#define BCR 0x8e +#define BCRL 0x8e +#define BCRH 0x8f +#define DSR 0x90 +#define DMR 0x91 +#define FCT 0x93 +#define DIR 0x94 +#define DCMD 0x95 + +/* combine with timer or DMA register address */ +#define TIMER0 0x00 +#define TIMER1 0x08 +#define TIMER2 0x10 +#define TIMER3 0x18 +#define RXDMA 0x00 +#define TXDMA 0x20 + +/* SCA Command Codes */ +#define NOOP 0x00 +#define TXRESET 0x01 +#define TXENABLE 0x02 +#define TXDISABLE 0x03 +#define TXCRCINIT 0x04 +#define TXCRCEXCL 0x05 +#define TXEOM 0x06 +#define TXABORT 0x07 +#define MPON 0x08 +#define TXBUFCLR 0x09 +#define RXRESET 0x11 +#define RXENABLE 0x12 +#define RXDISABLE 0x13 +#define RXCRCINIT 0x14 +#define RXREJECT 0x15 +#define SEARCHMP 0x16 +#define RXCRCEXCL 0x17 +#define RXCRCCALC 0x18 +#define CHRESET 0x21 +#define HUNT 0x31 + +/* DMA command codes */ +#define SWABORT 0x01 +#define FEICLEAR 0x02 + +/* IE0 */ +#define TXINTE BIT7 +#define RXINTE BIT6 +#define TXRDYE BIT1 +#define RXRDYE BIT0 + +/* IE1 & SR1 */ +#define UDRN BIT7 +#define IDLE BIT6 +#define SYNCD BIT4 +#define FLGD BIT4 +#define CCTS BIT3 +#define CDCD BIT2 +#define BRKD BIT1 +#define ABTD BIT1 +#define GAPD BIT1 +#define BRKE BIT0 +#define IDLD BIT0 + +/* IE2 & SR2 */ +#define EOM BIT7 +#define PMP BIT6 +#define SHRT BIT6 +#define PE BIT5 +#define ABT BIT5 +#define FRME BIT4 +#define RBIT BIT4 +#define OVRN BIT3 +#define CRCE BIT2 + + +/* + * Global linked list of SyncLink devices + */ +static SLMP_INFO *synclinkmp_device_list = NULL; +static int synclinkmp_adapter_count = -1; +static int synclinkmp_device_count = 0; + +/* + * Set this param to non-zero to load eax with the + * .text section address and breakpoint on module load. + * This is useful for use with gdb and add-symbol-file command. + */ +static int break_on_load=0; + +/* + * Driver major number, defaults to zero to get auto + * assigned major number. May be forced as module parameter. + */ +static int ttymajor=0; + +/* + * Array of user specified options for ISA adapters. + */ +static int debug_level = 0; +static int maxframe[MAX_DEVICES] = {0,}; +static int dosyncppp[MAX_DEVICES] = {0,}; + +module_param(break_on_load, bool, 0); +module_param(ttymajor, int, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); +module_param_array(dosyncppp, int, NULL, 0); + +static char *driver_name = "SyncLink MultiPort driver"; +static char *driver_version = "$Revision: 4.34 $"; + +static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent); +static void synclinkmp_remove_one(struct pci_dev *dev); + +static struct pci_device_id synclinkmp_pci_tbl[] = { + { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, }, + { 0, }, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl); + +MODULE_LICENSE("GPL"); + +static struct pci_driver synclinkmp_pci_driver = { + .name = "synclinkmp", + .id_table = synclinkmp_pci_tbl, + .probe = synclinkmp_init_one, + .remove = __devexit_p(synclinkmp_remove_one), +}; + + +static struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + + +/* tty callbacks */ + +static int open(struct tty_struct *tty, struct file * filp); +static void close(struct tty_struct *tty, struct file * filp); +static void hangup(struct tty_struct *tty); +static void set_termios(struct tty_struct *tty, struct termios *old_termios); + +static int write(struct tty_struct *tty, const unsigned char *buf, int count); +static void put_char(struct tty_struct *tty, unsigned char ch); +static void send_xchar(struct tty_struct *tty, char ch); +static void wait_until_sent(struct tty_struct *tty, int timeout); +static int write_room(struct tty_struct *tty); +static void flush_chars(struct tty_struct *tty); +static void flush_buffer(struct tty_struct *tty); +static void tx_hold(struct tty_struct *tty); +static void tx_release(struct tty_struct *tty); + +static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data); +static int chars_in_buffer(struct tty_struct *tty); +static void throttle(struct tty_struct * tty); +static void unthrottle(struct tty_struct * tty); +static void set_break(struct tty_struct *tty, int break_state); + +#ifdef CONFIG_HDLC +#define dev_to_port(D) (dev_to_hdlc(D)->priv) +static void hdlcdev_tx_done(SLMP_INFO *info); +static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size); +static int hdlcdev_init(SLMP_INFO *info); +static void hdlcdev_exit(SLMP_INFO *info); +#endif + +/* ioctl handlers */ + +static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount); +static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params); +static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params); +static int get_txidle(SLMP_INFO *info, int __user *idle_mode); +static int set_txidle(SLMP_INFO *info, int idle_mode); +static int tx_enable(SLMP_INFO *info, int enable); +static int tx_abort(SLMP_INFO *info); +static int rx_enable(SLMP_INFO *info, int enable); +static int map_status(int signals); +static int modem_input_wait(SLMP_INFO *info,int arg); +static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); +static int tiocmget(struct tty_struct *tty, struct file *file); +static int tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static void set_break(struct tty_struct *tty, int break_state); + +static void add_device(SLMP_INFO *info); +static void device_init(int adapter_num, struct pci_dev *pdev); +static int claim_resources(SLMP_INFO *info); +static void release_resources(SLMP_INFO *info); + +static int startup(SLMP_INFO *info); +static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); +static void shutdown(SLMP_INFO *info); +static void program_hw(SLMP_INFO *info); +static void change_params(SLMP_INFO *info); + +static int init_adapter(SLMP_INFO *info); +static int register_test(SLMP_INFO *info); +static int irq_test(SLMP_INFO *info); +static int loopback_test(SLMP_INFO *info); +static int adapter_test(SLMP_INFO *info); +static int memory_test(SLMP_INFO *info); + +static void reset_adapter(SLMP_INFO *info); +static void reset_port(SLMP_INFO *info); +static void async_mode(SLMP_INFO *info); +static void hdlc_mode(SLMP_INFO *info); + +static void rx_stop(SLMP_INFO *info); +static void rx_start(SLMP_INFO *info); +static void rx_reset_buffers(SLMP_INFO *info); +static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last); +static int rx_get_frame(SLMP_INFO *info); + +static void tx_start(SLMP_INFO *info); +static void tx_stop(SLMP_INFO *info); +static void tx_load_fifo(SLMP_INFO *info); +static void tx_set_idle(SLMP_INFO *info); +static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count); + +static void get_signals(SLMP_INFO *info); +static void set_signals(SLMP_INFO *info); +static void enable_loopback(SLMP_INFO *info, int enable); +static void set_rate(SLMP_INFO *info, u32 data_rate); + +static int bh_action(SLMP_INFO *info); +static void bh_handler(void* Context); +static void bh_receive(SLMP_INFO *info); +static void bh_transmit(SLMP_INFO *info); +static void bh_status(SLMP_INFO *info); +static void isr_timer(SLMP_INFO *info); +static void isr_rxint(SLMP_INFO *info); +static void isr_rxrdy(SLMP_INFO *info); +static void isr_txint(SLMP_INFO *info); +static void isr_txrdy(SLMP_INFO *info); +static void isr_rxdmaok(SLMP_INFO *info); +static void isr_rxdmaerror(SLMP_INFO *info); +static void isr_txdmaok(SLMP_INFO *info); +static void isr_txdmaerror(SLMP_INFO *info); +static void isr_io_pin(SLMP_INFO *info, u16 status); + +static int alloc_dma_bufs(SLMP_INFO *info); +static void free_dma_bufs(SLMP_INFO *info); +static int alloc_buf_list(SLMP_INFO *info); +static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count); +static int alloc_tmp_rx_buf(SLMP_INFO *info); +static void free_tmp_rx_buf(SLMP_INFO *info); + +static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count); +static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit); +static void tx_timeout(unsigned long context); +static void status_timeout(unsigned long context); + +static unsigned char read_reg(SLMP_INFO *info, unsigned char addr); +static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val); +static u16 read_reg16(SLMP_INFO *info, unsigned char addr); +static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val); +static unsigned char read_status_reg(SLMP_INFO * info); +static void write_control_reg(SLMP_INFO * info); + + +static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes +static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes +static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes + +static u32 misc_ctrl_value = 0x007e4040; +static u32 lcr1_brdr_value = 0x00800029; + +static u32 read_ahead_count = 8; + +/* DPCR, DMA Priority Control + * + * 07..05 Not used, must be 0 + * 04 BRC, bus release condition: 0=all transfers complete + * 1=release after 1 xfer on all channels + * 03 CCC, channel change condition: 0=every cycle + * 1=after each channel completes all xfers + * 02..00 PR<2..0>, priority 100=round robin + * + * 00000100 = 0x00 + */ +static unsigned char dma_priority = 0x04; + +// Number of bytes that can be written to shared RAM +// in a single write operation +static u32 sca_pci_load_interval = 64; + +/* + * 1st function defined in .text section. Calling this function in + * init_module() followed by a breakpoint allows a remote debugger + * (gdb) to get the .text address for the add-symbol-file command. + * This allows remote debugging of dynamically loadable modules. + */ +static void* synclinkmp_get_text_ptr(void); +static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;} + +static inline int sanity_check(SLMP_INFO *info, + char *name, const char *routine) +{ +#ifdef SANITY_CHECK + static const char *badmagic = + "Warning: bad magic number for synclinkmp_struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null synclinkmp_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/** + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ + +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->receive_buf) + ld->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* tty callbacks */ + +/* Called when a port is opened. Init and enable port. + */ +static int open(struct tty_struct *tty, struct file *filp) +{ + SLMP_INFO *info; + int retval, line; + unsigned long flags; + + line = tty->index; + if ((line < 0) || (line >= synclinkmp_device_count)) { + printk("%s(%d): open with invalid line #%d.\n", + __FILE__,__LINE__,line); + return -ENODEV; + } + + info = synclinkmp_device_list; + while(info && info->line != line) + info = info->next_device; + if (sanity_check(info, tty->name, "open")) + return -ENODEV; + if ( info->init_error ) { + printk("%s(%d):%s device is not allocated, init error=%d\n", + __FILE__,__LINE__,info->device_name,info->init_error); + return -ENODEV; + } + + tty->driver_data = info; + info->tty = tty; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s open(), old ref count = %d\n", + __FILE__,__LINE__,tty->driver->name, info->count); + + /* If port is closing, signal caller to try again */ + if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){ + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); + retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); + goto cleanup; + } + + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + goto cleanup; + } + info->count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) + goto cleanup; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() returned %d\n", + __FILE__,__LINE__, info->device_name, retval); + goto cleanup; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s open() success\n", + __FILE__,__LINE__, info->device_name); + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->tty = NULL; /* tty layer will release tty struct */ + if(info->count) + info->count--; + } + + return retval; +} + +/* Called when port is closed. Wait for remaining data to be + * sent. Disable port and free resources. + */ +static void close(struct tty_struct *tty, struct file *filp) +{ + SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + + if (sanity_check(info, tty->name, "close")) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s close() entry, count=%d\n", + __FILE__,__LINE__, info->device_name, info->count); + + if (!info->count) + return; + + if (tty_hung_up_p(filp)) + goto cleanup; + + if ((tty->count == 1) && (info->count != 1)) { + /* + * tty->count is 1 and the tty structure will be freed. + * info->count should be one in this case. + * if it's not, correct it so that the port is shutdown. + */ + printk("%s(%d):%s close: bad refcount; tty->count is 1, " + "info->count is %d\n", + __FILE__,__LINE__, info->device_name, info->count); + info->count = 1; + } + + info->count--; + + /* if at least one open remaining, leave hardware active */ + if (info->count) + goto cleanup; + + info->flags |= ASYNC_CLOSING; + + /* set tty->closing to notify line discipline to + * only process XON/XOFF characters. Only the N_TTY + * discipline appears to use this (ppp does not). + */ + tty->closing = 1; + + /* wait for transmit data to clear all layers */ + + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s close() calling tty_wait_until_sent\n", + __FILE__,__LINE__, info->device_name ); + tty_wait_until_sent(tty, info->closing_wait); + } + + if (info->flags & ASYNC_INITIALIZED) + wait_until_sent(tty, info->timeout); + + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + + tty_ldisc_flush(tty); + + shutdown(info); + + tty->closing = 0; + info->tty = NULL; + + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + + wake_up_interruptible(&info->close_wait); + +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, + tty->driver->name, info->count); +} + +/* Called by tty_hangup() when a hangup is signaled. + * This is the same as closing all open descriptors for the port. + */ +static void hangup(struct tty_struct *tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s hangup()\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "hangup")) + return; + + flush_buffer(tty); + shutdown(info); + + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = NULL; + + wake_up_interruptible(&info->open_wait); +} + +/* Set new termios settings + */ +static void set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__, + tty->driver->name ); + + /* just return if nothing has changed */ + if ((tty->termios->c_cflag == old_termios->c_cflag) + && (RELEVANT_IFLAG(tty->termios->c_iflag) + == RELEVANT_IFLAG(old_termios->c_iflag))) + return; + + change_params(info); + + /* Handle transition to B0 status */ + if (old_termios->c_cflag & CBAUD && + !(tty->termios->c_cflag & CBAUD)) { + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + tty->termios->c_cflag & CBAUD) { + info->serial_signals |= SerialSignal_DTR; + if (!(tty->termios->c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { + info->serial_signals |= SerialSignal_RTS; + } + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle turning off CRTSCTS */ + if (old_termios->c_cflag & CRTSCTS && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + tx_release(tty); + } +} + +/* Send a block of data + * + * Arguments: + * + * tty pointer to tty information structure + * buf pointer to buffer containing send data + * count size of send data in bytes + * + * Return Value: number of characters written + */ +static int write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s write() count=%d\n", + __FILE__,__LINE__,info->device_name,count); + + if (sanity_check(info, tty->name, "write")) + goto cleanup; + + if (!tty || !info->tx_buf) + goto cleanup; + + if (info->params.mode == MGSL_MODE_HDLC) { + if (count > info->max_frame_size) { + ret = -EIO; + goto cleanup; + } + if (info->tx_active) + goto cleanup; + if (info->tx_count) { + /* send accumulated data from send_char() calls */ + /* as frame and wait before accepting more data. */ + tx_load_dma_buffer(info, info->tx_buf, info->tx_count); + goto start; + } + ret = info->tx_count = count; + tx_load_dma_buffer(info, buf, count); + goto start; + } + + for (;;) { + c = min_t(int, count, + min(info->max_frame_size - info->tx_count - 1, + info->max_frame_size - info->tx_put)); + if (c <= 0) + break; + + memcpy(info->tx_buf + info->tx_put, buf, c); + + spin_lock_irqsave(&info->lock,flags); + info->tx_put += c; + if (info->tx_put >= info->max_frame_size) + info->tx_put -= info->max_frame_size; + info->tx_count += c; + spin_unlock_irqrestore(&info->lock,flags); + + buf += c; + count -= c; + ret += c; + } + + if (info->params.mode == MGSL_MODE_HDLC) { + if (count) { + ret = info->tx_count = 0; + goto cleanup; + } + tx_load_dma_buffer(info, info->tx_buf, info->tx_count); + } +start: + if (info->tx_count && !tty->stopped && !tty->hw_stopped) { + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk( "%s(%d):%s write() returning=%d\n", + __FILE__,__LINE__,info->device_name,ret); + return ret; +} + +/* Add a character to the transmit buffer. + */ +static void put_char(struct tty_struct *tty, unsigned char ch) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) { + printk( "%s(%d):%s put_char(%d)\n", + __FILE__,__LINE__,info->device_name,ch); + } + + if (sanity_check(info, tty->name, "put_char")) + return; + + if (!tty || !info->tx_buf) + return; + + spin_lock_irqsave(&info->lock,flags); + + if ( (info->params.mode != MGSL_MODE_HDLC) || + !info->tx_active ) { + + if (info->tx_count < info->max_frame_size - 1) { + info->tx_buf[info->tx_put++] = ch; + if (info->tx_put >= info->max_frame_size) + info->tx_put -= info->max_frame_size; + info->tx_count++; + } + } + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Send a high-priority XON/XOFF character + */ +static void send_xchar(struct tty_struct *tty, char ch) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s send_xchar(%d)\n", + __FILE__,__LINE__, info->device_name, ch ); + + if (sanity_check(info, tty->name, "send_xchar")) + return; + + info->x_char = ch; + if (ch) { + /* Make sure transmit interrupts are on */ + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* Wait until the transmitter is empty. + */ +static void wait_until_sent(struct tty_struct *tty, int timeout) +{ + SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_until_sent() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "wait_until_sent")) + return; + + if (!(info->flags & ASYNC_INITIALIZED)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if ( info->params.data_rate ) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + if ( info->params.mode == MGSL_MODE_HDLC ) { + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } else { + //TODO: determine if there is something similar to USC16C32 + // TXSTATUS_ALL_SENT status + while ( info->tx_active && info->tx_enabled) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } + +exit: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_until_sent() exit\n", + __FILE__,__LINE__, info->device_name ); +} + +/* Return the count of free bytes in transmit buffer + */ +static int write_room(struct tty_struct *tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + int ret; + + if (sanity_check(info, tty->name, "write_room")) + return 0; + + if (info->params.mode == MGSL_MODE_HDLC) { + ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; + } else { + ret = info->max_frame_size - info->tx_count - 1; + if (ret < 0) + ret = 0; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s write_room()=%d\n", + __FILE__, __LINE__, info->device_name, ret); + + return ret; +} + +/* enable transmitter and send remaining buffered characters + */ +static void flush_chars(struct tty_struct *tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s flush_chars() entry tx_count=%d\n", + __FILE__,__LINE__,info->device_name,info->tx_count); + + if (sanity_check(info, tty->name, "flush_chars")) + return; + + if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped || + !info->tx_buf) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s flush_chars() entry, starting transmitter\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->lock,flags); + + if (!info->tx_active) { + if ( (info->params.mode == MGSL_MODE_HDLC) && + info->tx_count ) { + /* operating in synchronous (frame oriented) mode */ + /* copy data from circular tx_buf to */ + /* transmit DMA buffer. */ + tx_load_dma_buffer(info, + info->tx_buf,info->tx_count); + } + tx_start(info); + } + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Discard all data in the send buffer + */ +static void flush_buffer(struct tty_struct *tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s flush_buffer() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "flush_buffer")) + return; + + spin_lock_irqsave(&info->lock,flags); + info->tx_count = info->tx_put = info->tx_get = 0; + del_timer(&info->tx_timer); + spin_unlock_irqrestore(&info->lock,flags); + + wake_up_interruptible(&tty->write_wait); + tty_wakeup(tty); +} + +/* throttle (stop) transmitter + */ +static void tx_hold(struct tty_struct *tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_hold")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_hold()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if (info->tx_enabled) + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* release (start) transmitter + */ +static void tx_release(struct tty_struct *tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_release")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_release()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Service an IOCTL request + * + * Arguments: + * + * tty pointer to tty instance data + * file pointer to associated file object for device + * cmd IOCTL command code + * arg command argument/context + * + * Return Value: 0 if success, otherwise error code + */ +static int ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + int error; + struct mgsl_icount cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; /* user space */ + unsigned long flags; + void __user *argp = (void __user *)arg; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__, + info->device_name, cmd ); + + if (sanity_check(info, tty->name, "ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case MGSL_IOCGPARAMS: + return get_params(info, argp); + case MGSL_IOCSPARAMS: + return set_params(info, argp); + case MGSL_IOCGTXIDLE: + return get_txidle(info, argp); + case MGSL_IOCSTXIDLE: + return set_txidle(info, (int)arg); + case MGSL_IOCTXENABLE: + return tx_enable(info, (int)arg); + case MGSL_IOCRXENABLE: + return rx_enable(info, (int)arg); + case MGSL_IOCTXABORT: + return tx_abort(info); + case MGSL_IOCGSTATS: + return get_stats(info, argp); + case MGSL_IOCWAITEVENT: + return wait_mgsl_event(info, argp); + case MGSL_IOCLOOPTXDONE: + return 0; // TODO: Not supported, need to document + /* Wait for modem input (DCD,RI,DSR,CTS) change + * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) + */ + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + case TIOCGICOUNT: + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + p_cuser = argp; + PUT_USER(error,cnow.cts, &p_cuser->cts); + if (error) return error; + PUT_USER(error,cnow.dsr, &p_cuser->dsr); + if (error) return error; + PUT_USER(error,cnow.rng, &p_cuser->rng); + if (error) return error; + PUT_USER(error,cnow.dcd, &p_cuser->dcd); + if (error) return error; + PUT_USER(error,cnow.rx, &p_cuser->rx); + if (error) return error; + PUT_USER(error,cnow.tx, &p_cuser->tx); + if (error) return error; + PUT_USER(error,cnow.frame, &p_cuser->frame); + if (error) return error; + PUT_USER(error,cnow.overrun, &p_cuser->overrun); + if (error) return error; + PUT_USER(error,cnow.parity, &p_cuser->parity); + if (error) return error; + PUT_USER(error,cnow.brk, &p_cuser->brk); + if (error) return error; + PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); + if (error) return error; + return 0; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* + * /proc fs routines.... + */ + +static inline int line_info(char *buf, SLMP_INFO *info) +{ + char stat_buf[30]; + int ret; + unsigned long flags; + + ret = sprintf(buf, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n" + "\tIRQ=%d MaxFrameSize=%u\n", + info->device_name, + info->phys_sca_base, + info->phys_memory_base, + info->phys_statctrl_base, + info->phys_lcr_base, + info->irq_level, + info->max_frame_size ); + + /* output current serial signal states */ + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->serial_signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->serial_signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->serial_signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->serial_signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->serial_signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->serial_signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode == MGSL_MODE_HDLC) { + ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxcrc); + } else { + ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + ret += sprintf(buf+ret, " fe:%d", info->icount.frame); + if (info->icount.parity) + ret += sprintf(buf+ret, " pe:%d", info->icount.parity); + if (info->icount.brk) + ret += sprintf(buf+ret, " brk:%d", info->icount.brk); + if (info->icount.overrun) + ret += sprintf(buf+ret, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + ret += sprintf(buf+ret, " %s\n", stat_buf+1); + + ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); + + return ret; +} + +/* Called to print information about devices + */ +int read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int len = 0, l; + off_t begin = 0; + SLMP_INFO *info; + + len += sprintf(page, "synclinkmp driver:%s\n", driver_version); + + info = synclinkmp_device_list; + while( info ) { + l = line_info(page + len, info); + len += l; + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + info = info->next_device; + } + + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (off-begin); + return ((count < begin+len-off) ? count : begin+len-off); +} + +/* Return the count of bytes in transmit buffer + */ +static int chars_in_buffer(struct tty_struct *tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + + if (sanity_check(info, tty->name, "chars_in_buffer")) + return 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s chars_in_buffer()=%d\n", + __FILE__, __LINE__, info->device_name, info->tx_count); + + return info->tx_count; +} + +/* Signal remote device to throttle send data (our receive data) + */ +static void throttle(struct tty_struct * tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s throttle() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "throttle")) + return; + + if (I_IXOFF(tty)) + send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock,flags); + info->serial_signals &= ~SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* Signal remote device to stop throttling send data (our receive data) + */ +static void unthrottle(struct tty_struct * tty) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s unthrottle() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* set or clear transmit break condition + * break_state -1=set break condition, 0=clear + */ +static void set_break(struct tty_struct *tty, int break_state) +{ + unsigned char RegValue; + SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_break(%d)\n", + __FILE__,__LINE__, info->device_name, break_state); + + if (sanity_check(info, tty->name, "set_break")) + return; + + spin_lock_irqsave(&info->lock,flags); + RegValue = read_reg(info, CTL); + if (break_state == -1) + RegValue |= BIT3; + else + RegValue &= ~BIT3; + write_reg(info, CTL, RegValue); + spin_unlock_irqrestore(&info->lock,flags); +} + +#ifdef CONFIG_HDLC + +/** + * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * set encoding and frame check sequence (FCS) options + * + * dev pointer to network device structure + * encoding serial encoding setting + * parity FCS setting + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->count) + return -EBUSY; + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype;; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + + return 0; +} + +/** + * called by generic HDLC layer to send frame + * + * skb socket buffer containing HDLC frame + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + struct net_device_stats *stats = hdlc_stats(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* copy data to device buffers */ + info->tx_count = skb->len; + tx_load_dma_buffer(info, skb->data, skb->len); + + /* update network statistics */ + stats->tx_packets++; + stats->tx_bytes += skb->len; + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + /* save start time for transmit timeout detection */ + dev->trans_start = jiffies; + + /* start hardware transmitter if necessary */ + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + + return 0; +} + +/** + * called by network layer when interface enabled + * claim resources and initialize hardware + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + int rc; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); + + /* generic HDLC layer open processing */ + if ((rc = hdlc_open(dev))) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->count != 0 || info->netcount != 0) { + printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert DTR and RTS, apply hardware settings */ + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + program_hw(info); + + /* enable network layer transmit */ + dev->trans_start = jiffies; + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->lock, flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock, flags); + hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, dev); + + return 0; +} + +/** + * called by network layer when interface is disabled + * shutdown hardware and release resources + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + return 0; +} + +/** + * called by network layer to process IOCTL call to network device + * + * dev pointer to network device structure + * ifr pointer to network interface request structure + * cmd IOCTL command code + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + SLMP_INFO *info = dev_to_port(dev); + unsigned int flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); + + /* return error if TTY interface open */ + if (info->count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * called by network layer when transmit timeout is detected + * + * dev pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + struct net_device_stats *stats = hdlc_stats(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_tx_timeout(%s)\n",dev->name); + + stats->tx_errors++; + stats->tx_aborted_errors++; + + spin_lock_irqsave(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); + + netif_wake_queue(dev); +} + +/** + * called by device driver when transmit completes + * reenable network layer transmit if stopped + * + * info pointer to device instance information + */ +static void hdlcdev_tx_done(SLMP_INFO *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * called by device driver when frame received + * pass frame to network layer + * + * info pointer to device instance information + * buf pointer to buffer contianing frame data + * size count of data bytes in buf + */ +static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + struct net_device_stats *stats = hdlc_stats(dev); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_rx(%s)\n",dev->name); + + if (skb == NULL) { + printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name); + stats->rx_dropped++; + return; + } + + memcpy(skb_put(skb, size),buf,size); + + skb->protocol = hdlc_type_trans(skb, info->netdev); + + stats->rx_packets++; + stats->rx_bytes += size; + + netif_rx(skb); + + info->netdev->last_rx = jiffies; +} + +/** + * called by device driver when adding device instance + * do generic HDLC initialization + * + * info pointer to device instance information + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_init(SLMP_INFO *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + if (!(dev = alloc_hdlcdev(info))) { + printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->mem_start = info->phys_sca_base; + dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1; + dev->irq = info->irq_level; + + /* network layer callbacks and settings */ + dev->do_ioctl = hdlcdev_ioctl; + dev->open = hdlcdev_open; + dev->stop = hdlcdev_close; + dev->tx_timeout = hdlcdev_tx_timeout; + dev->watchdog_timeo = 10*HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + if ((rc = register_hdlc_device(dev))) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * called by device driver when removing device instance + * do generic HDLC cleanup + * + * info pointer to device instance information + */ +static void hdlcdev_exit(SLMP_INFO *info) +{ + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* CONFIG_HDLC */ + + +/* Return next bottom half action to perform. + * Return Value: BH action code or 0 if nothing to do. + */ +int bh_action(SLMP_INFO *info) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&info->lock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } + + if (!rc) { + /* Mark BH routine as complete */ + info->bh_running = 0; + info->bh_requested = 0; + } + + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +/* Perform bottom half processing of work items queued by ISR. + */ +void bh_handler(void* Context) +{ + SLMP_INFO *info = (SLMP_INFO*)Context; + int action; + + if (!info) + return; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() entry\n", + __FILE__,__LINE__,info->device_name); + + info->bh_running = 1; + + while((action = bh_action(info)) != 0) { + + /* Process work item */ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() work item action=%d\n", + __FILE__,__LINE__,info->device_name, action); + + switch (action) { + + case BH_RECEIVE: + bh_receive(info); + break; + case BH_TRANSMIT: + bh_transmit(info); + break; + case BH_STATUS: + bh_status(info); + break; + default: + /* unknown work item ID */ + printk("%s(%d):%s Unknown work item ID=%08X!\n", + __FILE__,__LINE__,info->device_name,action); + break; + } + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() exit\n", + __FILE__,__LINE__,info->device_name); +} + +void bh_receive(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_receive()\n", + __FILE__,__LINE__,info->device_name); + + while( rx_get_frame(info) ); +} + +void bh_transmit(SLMP_INFO *info) +{ + struct tty_struct *tty = info->tty; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_transmit() entry\n", + __FILE__,__LINE__,info->device_name); + + if (tty) { + tty_wakeup(tty); + wake_up_interruptible(&tty->write_wait); + } +} + +void bh_status(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_status() entry\n", + __FILE__,__LINE__,info->device_name); + + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; +} + +void isr_timer(SLMP_INFO * info) +{ + unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; + + /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */ + write_reg(info, IER2, 0); + + /* TMCS, Timer Control/Status Register + * + * 07 CMF, Compare match flag (read only) 1=match + * 06 ECMI, CMF Interrupt Enable: 0=disabled + * 05 Reserved, must be 0 + * 04 TME, Timer Enable + * 03..00 Reserved, must be 0 + * + * 0000 0000 + */ + write_reg(info, (unsigned char)(timer + TMCS), 0); + + info->irq_occurred = TRUE; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_timer()\n", + __FILE__,__LINE__,info->device_name); +} + +void isr_rxint(SLMP_INFO * info) +{ + struct tty_struct *tty = info->tty; + struct mgsl_icount *icount = &info->icount; + unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD); + unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN; + + /* clear status bits */ + if (status) + write_reg(info, SR1, status); + + if (status2) + write_reg(info, SR2, status2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxint status=%02X %02x\n", + __FILE__,__LINE__,info->device_name,status,status2); + + if (info->params.mode == MGSL_MODE_ASYNC) { + if (status & BRKD) { + icount->brk++; + + /* process break detection if tty control + * is not set to ignore it + */ + if ( tty ) { + if (!(status & info->ignore_status_mask1)) { + if (info->read_status_mask1 & BRKD) { + *tty->flip.flag_buf_ptr = TTY_BREAK; + if (info->flags & ASYNC_SAK) + do_SAK(tty); + } + } + } + } + } + else { + if (status & (FLGD|IDLD)) { + if (status & FLGD) + info->icount.exithunt++; + else if (status & IDLD) + info->icount.rxidle++; + wake_up_interruptible(&info->event_wait_q); + } + } + + if (status & CDCD) { + /* simulate a common modem status change interrupt + * for our handler + */ + get_signals( info ); + isr_io_pin(info, + MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD)); + } +} + +/* + * handle async rx data interrupts + */ +void isr_rxrdy(SLMP_INFO * info) +{ + u16 status; + unsigned char DataByte; + struct tty_struct *tty = info->tty; + struct mgsl_icount *icount = &info->icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxrdy\n", + __FILE__,__LINE__,info->device_name); + + while((status = read_reg(info,CST0)) & BIT0) + { + DataByte = read_reg(info,TRB); + + if ( tty ) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + continue; + + *tty->flip.char_buf_ptr = DataByte; + *tty->flip.flag_buf_ptr = 0; + } + + icount->rx++; + + if ( status & (PE + FRME + OVRN) ) { + printk("%s(%d):%s rxerr=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + /* update error statistics */ + if (status & PE) + icount->parity++; + else if (status & FRME) + icount->frame++; + else if (status & OVRN) + icount->overrun++; + + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask2) + continue; + + status &= info->read_status_mask2; + + if ( tty ) { + if (status & PE) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (status & FRME) + *tty->flip.flag_buf_ptr = TTY_FRAME; + if (status & OVRN) { + /* Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + if (tty->flip.count < TTY_FLIPBUF_SIZE) { + tty->flip.count++; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + } + } + } + } /* end of if (error) */ + + if ( tty ) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + } + + if ( debug_level >= DEBUG_LEVEL_ISR ) { + printk("%s(%d):%s isr_rxrdy() flip count=%d\n", + __FILE__,__LINE__,info->device_name, + tty ? tty->flip.count : 0); + printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n", + __FILE__,__LINE__,info->device_name, + icount->rx,icount->brk,icount->parity, + icount->frame,icount->overrun); + } + + if ( tty && tty->flip.count ) + tty_flip_buffer_push(tty); +} + +static void isr_txeom(SLMP_INFO * info, unsigned char status) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txeom status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ + write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + if (status & UDRN) { + write_reg(info, CMD, TXRESET); + write_reg(info, CMD, TXENABLE); + } else + write_reg(info, CMD, TXBUFCLR); + + /* disable and clear tx interrupts */ + info->ie0_value &= ~TXRDYE; + info->ie1_value &= ~(IDLE + UDRN); + write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); + write_reg(info, SR1, (unsigned char)(UDRN + IDLE)); + + if ( info->tx_active ) { + if (info->params.mode != MGSL_MODE_ASYNC) { + if (status & UDRN) + info->icount.txunder++; + else if (status & IDLE) + info->icount.txok++; + } + + info->tx_active = 0; + info->tx_count = info->tx_put = info->tx_get = 0; + + del_timer(&info->tx_timer); + + if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) { + info->serial_signals &= ~SerialSignal_RTS; + info->drop_rts_on_tx_done = 0; + set_signals(info); + } + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) { + tx_stop(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + } +} + + +/* + * handle tx status interrupts + */ +void isr_txint(SLMP_INFO * info) +{ + unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS); + + /* clear status bits */ + write_reg(info, SR1, status); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txint status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + if (status & (UDRN + IDLE)) + isr_txeom(info, status); + + if (status & CCTS) { + /* simulate a common modem status change interrupt + * for our handler + */ + get_signals( info ); + isr_io_pin(info, + MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS)); + + } +} + +/* + * handle async tx data interrupts + */ +void isr_txrdy(SLMP_INFO * info) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txrdy() tx_count=%d\n", + __FILE__,__LINE__,info->device_name,info->tx_count); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* disable TXRDY IRQ, enable IDLE IRQ */ + info->ie0_value &= ~TXRDYE; + info->ie1_value |= IDLE; + write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); + return; + } + + if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) { + tx_stop(info); + return; + } + + if ( info->tx_count ) + tx_load_fifo( info ); + else { + info->tx_active = 0; + info->ie0_value &= ~TXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + if (info->tx_count < WAKEUP_CHARS) + info->pending_bh |= BH_TRANSMIT; +} + +void isr_rxdmaok(SLMP_INFO * info) +{ + /* BIT7 = EOT (end of transfer) + * BIT6 = EOM (end of message/frame) + */ + unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxdmaok(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + info->pending_bh |= BH_RECEIVE; +} + +void isr_rxdmaerror(SLMP_INFO * info) +{ + /* BIT5 = BOF (buffer overflow) + * BIT4 = COF (counter overflow) + */ + unsigned char status = read_reg(info,RXDMA + DSR) & 0x30; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + info->rx_overflow = TRUE; + info->pending_bh |= BH_RECEIVE; +} + +void isr_txdmaok(SLMP_INFO * info) +{ + unsigned char status_reg1 = read_reg(info, SR1); + + write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ + write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txdmaok(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status_reg1); + + /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */ + write_reg16(info, TRC0, 0); + info->ie0_value |= TXRDYE; + write_reg(info, IE0, info->ie0_value); +} + +void isr_txdmaerror(SLMP_INFO * info) +{ + /* BIT5 = BOF (buffer overflow) + * BIT4 = COF (counter overflow) + */ + unsigned char status = read_reg(info,TXDMA + DSR) & 0x30; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, TXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txdmaerror(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); +} + +/* handle input serial signal changes + */ +void isr_io_pin( SLMP_INFO *info, u16 status ) +{ + struct mgsl_icount *icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):isr_io_pin status=%04X\n", + __FILE__,__LINE__,status); + + if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | + MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { + icount = &info->icount; + /* update input line counters */ + if (status & MISCSTATUS_RI_LATCHED) { + icount->rng++; + if ( status & SerialSignal_RI ) + info->input_signal_events.ri_up++; + else + info->input_signal_events.ri_down++; + } + if (status & MISCSTATUS_DSR_LATCHED) { + icount->dsr++; + if ( status & SerialSignal_DSR ) + info->input_signal_events.dsr_up++; + else + info->input_signal_events.dsr_down++; + } + if (status & MISCSTATUS_DCD_LATCHED) { + if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { + info->ie1_value &= ~CDCD; + write_reg(info, IE1, info->ie1_value); + } + icount->dcd++; + if (status & SerialSignal_DCD) { + info->input_signal_events.dcd_up++; + } else + info->input_signal_events.dcd_down++; +#ifdef CONFIG_HDLC + if (info->netcount) + hdlc_set_carrier(status & SerialSignal_DCD, info->netdev); +#endif + } + if (status & MISCSTATUS_CTS_LATCHED) + { + if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { + info->ie1_value &= ~CCTS; + write_reg(info, IE1, info->ie1_value); + } + icount->cts++; + if ( status & SerialSignal_CTS ) + info->input_signal_events.cts_up++; + else + info->input_signal_events.cts_down++; + } + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + if ( (info->flags & ASYNC_CHECK_CD) && + (status & MISCSTATUS_DCD_LATCHED) ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s CD now %s...", info->device_name, + (status & SerialSignal_DCD) ? "on" : "off"); + if (status & SerialSignal_DCD) + wake_up_interruptible(&info->open_wait); + else { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("doing serial hangup..."); + if (info->tty) + tty_hangup(info->tty); + } + } + + if ( (info->flags & ASYNC_CTS_FLOW) && + (status & MISCSTATUS_CTS_LATCHED) ) { + if ( info->tty ) { + if (info->tty->hw_stopped) { + if (status & SerialSignal_CTS) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx start..."); + info->tty->hw_stopped = 0; + tx_start(info); + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(status & SerialSignal_CTS)) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx stop..."); + info->tty->hw_stopped = 1; + tx_stop(info); + } + } + } + } + } + + info->pending_bh |= BH_STATUS; +} + +/* Interrupt service routine entry point. + * + * Arguments: + * irq interrupt number that caused interrupt + * dev_id device ID supplied during interrupt registration + * regs interrupted processor context + */ +static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + SLMP_INFO * info; + unsigned char status, status0, status1=0; + unsigned char dmastatus, dmastatus0, dmastatus1=0; + unsigned char timerstatus0, timerstatus1=0; + unsigned char shift; + unsigned int i; + unsigned short tmp; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d): synclinkmp_interrupt(%d)entry.\n", + __FILE__,__LINE__,irq); + + info = (SLMP_INFO *)dev_id; + if (!info) + return IRQ_NONE; + + spin_lock(&info->lock); + + for(;;) { + + /* get status for SCA0 (ports 0-1) */ + tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */ + status0 = (unsigned char)tmp; + dmastatus0 = (unsigned char)(tmp>>8); + timerstatus0 = read_reg(info, ISR2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", + __FILE__,__LINE__,info->device_name, + status0,dmastatus0,timerstatus0); + + if (info->port_count == 4) { + /* get status for SCA1 (ports 2-3) */ + tmp = read_reg16(info->port_array[2], ISR0); + status1 = (unsigned char)tmp; + dmastatus1 = (unsigned char)(tmp>>8); + timerstatus1 = read_reg(info->port_array[2], ISR2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n", + __FILE__,__LINE__,info->device_name, + status1,dmastatus1,timerstatus1); + } + + if (!status0 && !dmastatus0 && !timerstatus0 && + !status1 && !dmastatus1 && !timerstatus1) + break; + + for(i=0; i < info->port_count ; i++) { + if (info->port_array[i] == NULL) + continue; + if (i < 2) { + status = status0; + dmastatus = dmastatus0; + } else { + status = status1; + dmastatus = dmastatus1; + } + + shift = i & 1 ? 4 :0; + + if (status & BIT0 << shift) + isr_rxrdy(info->port_array[i]); + if (status & BIT1 << shift) + isr_txrdy(info->port_array[i]); + if (status & BIT2 << shift) + isr_rxint(info->port_array[i]); + if (status & BIT3 << shift) + isr_txint(info->port_array[i]); + + if (dmastatus & BIT0 << shift) + isr_rxdmaerror(info->port_array[i]); + if (dmastatus & BIT1 << shift) + isr_rxdmaok(info->port_array[i]); + if (dmastatus & BIT2 << shift) + isr_txdmaerror(info->port_array[i]); + if (dmastatus & BIT3 << shift) + isr_txdmaok(info->port_array[i]); + } + + if (timerstatus0 & (BIT5 | BIT4)) + isr_timer(info->port_array[0]); + if (timerstatus0 & (BIT7 | BIT6)) + isr_timer(info->port_array[1]); + if (timerstatus1 & (BIT5 | BIT4)) + isr_timer(info->port_array[2]); + if (timerstatus1 & (BIT7 | BIT6)) + isr_timer(info->port_array[3]); + } + + for(i=0; i < info->port_count ; i++) { + SLMP_INFO * port = info->port_array[i]; + + /* Request bottom half processing if there's something + * for it to do and the bh is not already running. + * + * Note: startup adapter diags require interrupts. + * do not request bottom half processing if the + * device is not open in a normal mode. + */ + if ( port && (port->count || port->netcount) && + port->pending_bh && !port->bh_running && + !port->bh_requested ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s queueing bh task.\n", + __FILE__,__LINE__,port->device_name); + schedule_work(&port->task); + port->bh_requested = 1; + } + } + + spin_unlock(&info->lock); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):synclinkmp_interrupt(%d)exit.\n", + __FILE__,__LINE__,irq); + return IRQ_HANDLED; +} + +/* Initialize and start device. + */ +static int startup(SLMP_INFO * info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name); + + if (info->flags & ASYNC_INITIALIZED) + return 0; + + if (!info->tx_buf) { + info->tx_buf = (unsigned char *)kmalloc(info->max_frame_size, GFP_KERNEL); + if (!info->tx_buf) { + printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", + __FILE__,__LINE__,info->device_name); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + /* program hardware for current parameters */ + reset_port(info); + + change_params(info); + + info->status_timer.expires = jiffies + msecs_to_jiffies(10); + add_timer(&info->status_timer); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags |= ASYNC_INITIALIZED; + + return 0; +} + +/* Called by close() and hangup() to shutdown hardware + */ +static void shutdown(SLMP_INFO * info) +{ + unsigned long flags; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s synclinkmp_shutdown()\n", + __FILE__,__LINE__, info->device_name ); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer(&info->tx_timer); + del_timer(&info->status_timer); + + if (info->tx_buf) { + kfree(info->tx_buf); + info->tx_buf = NULL; + } + + spin_lock_irqsave(&info->lock,flags); + + reset_port(info); + + if (!info->tty || info->tty->termios->c_cflag & HUPCL) { + info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + set_signals(info); + } + + spin_unlock_irqrestore(&info->lock,flags); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; +} + +static void program_hw(SLMP_INFO *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + + rx_stop(info); + tx_stop(info); + + info->tx_count = info->tx_put = info->tx_get = 0; + + if (info->params.mode == MGSL_MODE_HDLC || info->netcount) + hdlc_mode(info); + else + async_mode(info); + + set_signals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + info->ie1_value |= (CDCD|CCTS); + write_reg(info, IE1, info->ie1_value); + + get_signals(info); + + if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) ) + rx_start(info); + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Reconfigure adapter based on new parameters + */ +static void change_params(SLMP_INFO *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->tty || !info->tty->termios) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s change_params()\n", + __FILE__,__LINE__, info->device_name ); + + cflag = info->tty->termios->c_cflag; + + /* if B0 rate (hangup) specified then negate DTR and RTS */ + /* otherwise assert DTR and RTS */ + if (cflag & CBAUD) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: info->params.data_bits = 7; break; + } + + if (cflag & CSTOPB) + info->params.stop_bits = 2; + else + info->params.stop_bits = 1; + + info->params.parity = ASYNC_PARITY_NONE; + if (cflag & PARENB) { + if (cflag & PARODD) + info->params.parity = ASYNC_PARITY_ODD; + else + info->params.parity = ASYNC_PARITY_EVEN; +#ifdef CMSPAR + if (cflag & CMSPAR) + info->params.parity = ASYNC_PARITY_SPACE; +#endif + } + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + /* if port data rate is set to 460800 or less then + * allow tty settings to override, otherwise keep the + * current data rate. + */ + if (info->params.data_rate <= 460800) { + info->params.data_rate = tty_get_baud_rate(info->tty); + } + + if ( info->params.data_rate ) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + if (cflag & CRTSCTS) + info->flags |= ASYNC_CTS_FLOW; + else + info->flags &= ~ASYNC_CTS_FLOW; + + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; + + /* process tty input control flags */ + + info->read_status_mask2 = OVRN; + if (I_INPCK(info->tty)) + info->read_status_mask2 |= PE | FRME; + if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + info->read_status_mask1 |= BRKD; + if (I_IGNPAR(info->tty)) + info->ignore_status_mask2 |= PE | FRME; + if (I_IGNBRK(info->tty)) { + info->ignore_status_mask1 |= BRKD; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->tty)) + info->ignore_status_mask2 |= OVRN; + } + + program_hw(info); +} + +static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_params()\n", + __FILE__,__LINE__, info->device_name); + + COPY_TO_USER(err,user_icount, &info->icount, sizeof(struct mgsl_icount)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s get_stats() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; +} + +static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) +{ + int err; + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_params()\n", + __FILE__,__LINE__, info->device_name); + + COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s get_params() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; +} + +static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_params\n", + __FILE__,__LINE__,info->device_name ); + COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s set_params() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + spin_lock_irqsave(&info->lock,flags); + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->lock,flags); + + change_params(info); + + return 0; +} + +static int get_txidle(SLMP_INFO * info, int __user *idle_mode) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_txidle()=%d\n", + __FILE__,__LINE__, info->device_name, info->idle_mode); + + COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s get_txidle() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; +} + +static int set_txidle(SLMP_INFO * info, int idle_mode) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_txidle(%d)\n", + __FILE__,__LINE__,info->device_name, idle_mode ); + + spin_lock_irqsave(&info->lock,flags); + info->idle_mode = idle_mode; + tx_set_idle( info ); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int tx_enable(SLMP_INFO * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tx_enable(%d)\n", + __FILE__,__LINE__,info->device_name, enable); + + spin_lock_irqsave(&info->lock,flags); + if ( enable ) { + if ( !info->tx_enabled ) { + tx_start(info); + } + } else { + if ( info->tx_enabled ) + tx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* abort send HDLC frame + */ +static int tx_abort(SLMP_INFO * info) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tx_abort()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) { + info->ie1_value &= ~UDRN; + info->ie1_value |= IDLE; + write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + write_reg(info, CMD, TXABORT); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int rx_enable(SLMP_INFO * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s rx_enable(%d)\n", + __FILE__,__LINE__,info->device_name,enable); + + spin_lock_irqsave(&info->lock,flags); + if ( enable ) { + if ( !info->rx_enabled ) + rx_start(info); + } else { + if ( info->rx_enabled ) + rx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int map_status(int signals) +{ + /* Map status bits to API event bits */ + + return ((signals & SerialSignal_DSR) ? MgslEvent_DsrActive : MgslEvent_DsrInactive) + + ((signals & SerialSignal_CTS) ? MgslEvent_CtsActive : MgslEvent_CtsInactive) + + ((signals & SerialSignal_DCD) ? MgslEvent_DcdActive : MgslEvent_DcdInactive) + + ((signals & SerialSignal_RI) ? MgslEvent_RiActive : MgslEvent_RiInactive); +} + +/* wait for specified event to occur + */ +static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); + if (rc) { + return -EFAULT; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_mgsl_event(%d)\n", + __FILE__,__LINE__,info->device_name,mask); + + spin_lock_irqsave(&info->lock,flags); + + /* return immediately if state matches requested events */ + get_signals(info); + s = map_status(info->serial_signals); + + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->lock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { + unsigned char oldval = info->ie1_value; + unsigned char newval = oldval + + (mask & MgslEvent_ExitHuntMode ? FLGD:0) + + (mask & MgslEvent_IdleReceived ? IDLD:0); + if ( oldval != newval ) { + info->ie1_value = newval; + write_reg(info, IE1, info->ie1_value); + } + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->lock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + info->ie1_value &= ~(FLGD|IDLD); + write_reg(info, IE1, info->ie1_value); + } + spin_unlock_irqrestore(&info->lock,flags); + } +exit: + if ( rc == 0 ) + PUT_USER(rc, events, mask_ptr); + + return rc; +} + +static int modem_input_wait(SLMP_INFO *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* return the state of the serial control and status signals + */ +static int tiocmget(struct tty_struct *tty, struct file *file) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + + ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + + ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + + ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + + ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + + ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmget() value=%08X\n", + __FILE__,__LINE__, info->device_name, result ); + return result; +} + +/* set modem control signals (DTR/RTS) + */ +static int tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmset(%x,%x)\n", + __FILE__,__LINE__,info->device_name, set, clear); + + if (set & TIOCM_RTS) + info->serial_signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->serial_signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->serial_signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->serial_signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + return 0; +} + + + +/* Block the current process until the specified port is ready to open. + */ +static int block_til_ready(struct tty_struct *tty, struct file *filp, + SLMP_INFO *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0, extra_count = 0; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready()\n", + __FILE__,__LINE__, tty->driver->name ); + + if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ + /* nonblock mode is set or port is not enabled */ + /* just verify that callout device is not active */ + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&info->open_wait, &wait); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() before block, count=%d\n", + __FILE__,__LINE__, tty->driver->name, info->count ); + + spin_lock_irqsave(&info->lock, flags); + if (!tty_hung_up_p(filp)) { + extra_count = 1; + info->count--; + } + spin_unlock_irqrestore(&info->lock, flags); + info->blocked_open++; + + while (1) { + if ((tty->termios->c_cflag & CBAUD)) { + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){ + retval = (info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { + break; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() count=%d\n", + __FILE__,__LINE__, tty->driver->name, info->count ); + + schedule(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + + if (extra_count) + info->count++; + info->blocked_open--; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() after, count=%d\n", + __FILE__,__LINE__, tty->driver->name, info->count ); + + if (!retval) + info->flags |= ASYNC_NORMAL_ACTIVE; + + return retval; +} + +int alloc_dma_bufs(SLMP_INFO *info) +{ + unsigned short BuffersPerFrame; + unsigned short BufferCount; + + // Force allocation to start at 64K boundary for each port. + // This is necessary because *all* buffer descriptors for a port + // *must* be in the same 64K block. All descriptors on a port + // share a common 'base' address (upper 8 bits of 24 bits) programmed + // into the CBP register. + info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num; + + /* Calculate the number of DMA buffers necessary to hold the */ + /* largest allowable frame size. Note: If the max frame size is */ + /* not an even multiple of the DMA buffer size then we need to */ + /* round the buffer count per frame up one. */ + + BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE); + if ( info->max_frame_size % SCABUFSIZE ) + BuffersPerFrame++; + + /* calculate total number of data buffers (SCABUFSIZE) possible + * in one ports memory (SCA_MEM_SIZE/4) after allocating memory + * for the descriptor list (BUFFERLISTSIZE). + */ + BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE; + + /* limit number of buffers to maximum amount of descriptors */ + if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC)) + BufferCount = BUFFERLISTSIZE/sizeof(SCADESC); + + /* use enough buffers to transmit one max size frame */ + info->tx_buf_count = BuffersPerFrame + 1; + + /* never use more than half the available buffers for transmit */ + if (info->tx_buf_count > (BufferCount/2)) + info->tx_buf_count = BufferCount/2; + + if (info->tx_buf_count > SCAMAXDESC) + info->tx_buf_count = SCAMAXDESC; + + /* use remaining buffers for receive */ + info->rx_buf_count = BufferCount - info->tx_buf_count; + + if (info->rx_buf_count > SCAMAXDESC) + info->rx_buf_count = SCAMAXDESC; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n", + __FILE__,__LINE__, info->device_name, + info->tx_buf_count,info->rx_buf_count); + + if ( alloc_buf_list( info ) < 0 || + alloc_frame_bufs(info, + info->rx_buf_list, + info->rx_buf_list_ex, + info->rx_buf_count) < 0 || + alloc_frame_bufs(info, + info->tx_buf_list, + info->tx_buf_list_ex, + info->tx_buf_count) < 0 || + alloc_tmp_rx_buf(info) < 0 ) { + printk("%s(%d):%s Can't allocate DMA buffer memory\n", + __FILE__,__LINE__, info->device_name); + return -ENOMEM; + } + + rx_reset_buffers( info ); + + return 0; +} + +/* Allocate DMA buffers for the transmit and receive descriptor lists. + */ +int alloc_buf_list(SLMP_INFO *info) +{ + unsigned int i; + + /* build list in adapter shared memory */ + info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc; + info->buffer_list_phys = info->port_array[0]->last_mem_alloc; + info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE; + + memset(info->buffer_list, 0, BUFFERLISTSIZE); + + /* Save virtual address pointers to the receive and */ + /* transmit buffer lists. (Receive 1st). These pointers will */ + /* be used by the processor to access the lists. */ + info->rx_buf_list = (SCADESC *)info->buffer_list; + + info->tx_buf_list = (SCADESC *)info->buffer_list; + info->tx_buf_list += info->rx_buf_count; + + /* Build links for circular buffer entry lists (tx and rx) + * + * Note: links are physical addresses read by the SCA device + * to determine the next buffer entry to use. + */ + + for ( i = 0; i < info->rx_buf_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->rx_buf_list_ex[i].phys_entry = + info->buffer_list_phys + (i * sizeof(SCABUFSIZE)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + info->rx_buf_list[i].next = info->buffer_list_phys; + if ( i < info->rx_buf_count - 1 ) + info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC); + + info->rx_buf_list[i].length = SCABUFSIZE; + } + + for ( i = 0; i < info->tx_buf_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys + + ((info->rx_buf_count + i) * sizeof(SCADESC)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->tx_buf_list[i].next = info->buffer_list_phys + + info->rx_buf_count * sizeof(SCADESC); + + if ( i < info->tx_buf_count - 1 ) + info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC); + } + + return 0; +} + +/* Allocate the frame DMA buffers used by the specified buffer list. + */ +int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) +{ + int i; + unsigned long phys_addr; + + for ( i = 0; i < count; i++ ) { + buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc; + phys_addr = info->port_array[0]->last_mem_alloc; + info->port_array[0]->last_mem_alloc += SCABUFSIZE; + + buf_list[i].buf_ptr = (unsigned short)phys_addr; + buf_list[i].buf_base = (unsigned char)(phys_addr >> 16); + } + + return 0; +} + +void free_dma_bufs(SLMP_INFO *info) +{ + info->buffer_list = NULL; + info->rx_buf_list = NULL; + info->tx_buf_list = NULL; +} + +/* allocate buffer large enough to hold max_frame_size. + * This buffer is used to pass an assembled frame to the line discipline. + */ +int alloc_tmp_rx_buf(SLMP_INFO *info) +{ + info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (info->tmp_rx_buf == NULL) + return -ENOMEM; + return 0; +} + +void free_tmp_rx_buf(SLMP_INFO *info) +{ + if (info->tmp_rx_buf) + kfree(info->tmp_rx_buf); + info->tmp_rx_buf = NULL; +} + +int claim_resources(SLMP_INFO *info) +{ + if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->shared_mem_requested = 1; + + if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) { + printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->lcr_mem_requested = 1; + + if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_sca_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->sca_base_requested = 1; + + if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_statctrl_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->sca_statctrl_requested = 1; + + info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE); + if (!info->memory_base) { + printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + + info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE); + if (!info->lcr_base) { + printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->lcr_base += info->lcr_offset; + + info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE); + if (!info->sca_base) { + printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_sca_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->sca_base += info->sca_offset; + + info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE); + if (!info->statctrl_base) { + printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_statctrl_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->statctrl_base += info->statctrl_offset; + + if ( !memory_test(info) ) { + printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + info->init_error = DiagStatus_MemoryError; + goto errout; + } + + return 0; + +errout: + release_resources( info ); + return -ENODEV; +} + +void release_resources(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s release_resources() entry\n", + __FILE__,__LINE__,info->device_name ); + + if ( info->irq_requested ) { + free_irq(info->irq_level, info); + info->irq_requested = 0; + } + + if ( info->shared_mem_requested ) { + release_mem_region(info->phys_memory_base,SCA_MEM_SIZE); + info->shared_mem_requested = 0; + } + if ( info->lcr_mem_requested ) { + release_mem_region(info->phys_lcr_base + info->lcr_offset,128); + info->lcr_mem_requested = 0; + } + if ( info->sca_base_requested ) { + release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE); + info->sca_base_requested = 0; + } + if ( info->sca_statctrl_requested ) { + release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE); + info->sca_statctrl_requested = 0; + } + + if (info->memory_base){ + iounmap(info->memory_base); + info->memory_base = NULL; + } + + if (info->sca_base) { + iounmap(info->sca_base - info->sca_offset); + info->sca_base=NULL; + } + + if (info->statctrl_base) { + iounmap(info->statctrl_base - info->statctrl_offset); + info->statctrl_base=NULL; + } + + if (info->lcr_base){ + iounmap(info->lcr_base - info->lcr_offset); + info->lcr_base = NULL; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s release_resources() exit\n", + __FILE__,__LINE__,info->device_name ); +} + +/* Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + */ +void add_device(SLMP_INFO *info) +{ + info->next_device = NULL; + info->line = synclinkmp_device_count; + sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num); + + if (info->line < MAX_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + info->dosyncppp = dosyncppp[info->line]; + } + + synclinkmp_device_count++; + + if ( !synclinkmp_device_list ) + synclinkmp_device_list = info; + else { + SLMP_INFO *current_dev = synclinkmp_device_list; + while( current_dev->next_device ) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if ( info->max_frame_size < 4096 ) + info->max_frame_size = 4096; + else if ( info->max_frame_size > 65535 ) + info->max_frame_size = 65535; + + printk( "SyncLink MultiPort %s: " + "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n", + info->device_name, + info->phys_sca_base, + info->phys_memory_base, + info->phys_statctrl_base, + info->phys_lcr_base, + info->irq_level, + info->max_frame_size ); + +#ifdef CONFIG_HDLC + hdlcdev_init(info); +#endif +} + +/* Allocate and initialize a device instance structure + * + * Return Value: pointer to SLMP_INFO if success, otherwise NULL + */ +static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) +{ + SLMP_INFO *info; + + info = (SLMP_INFO *)kmalloc(sizeof(SLMP_INFO), + GFP_KERNEL); + + if (!info) { + printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n", + __FILE__,__LINE__, adapter_num, port_num); + } else { + memset(info, 0, sizeof(SLMP_INFO)); + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, bh_handler, info); + info->max_frame_size = 4096; + info->close_delay = 5*HZ/10; + info->closing_wait = 30*HZ; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->adapter_num = adapter_num; + info->port_num = port_num; + + /* Copy configuration info to device instance data */ + info->irq_level = pdev->irq; + info->phys_lcr_base = pci_resource_start(pdev,0); + info->phys_sca_base = pci_resource_start(pdev,2); + info->phys_memory_base = pci_resource_start(pdev,3); + info->phys_statctrl_base = pci_resource_start(pdev,4); + + /* Because veremap only works on page boundaries we must map + * a larger area than is actually implemented for the LCR + * memory range. We map a full page starting at the page boundary. + */ + info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); + info->phys_lcr_base &= ~(PAGE_SIZE-1); + + info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1); + info->phys_sca_base &= ~(PAGE_SIZE-1); + + info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1); + info->phys_statctrl_base &= ~(PAGE_SIZE-1); + + info->bus_type = MGSL_BUS_TYPE_PCI; + info->irq_flags = SA_SHIRQ; + + init_timer(&info->tx_timer); + info->tx_timer.data = (unsigned long)info; + info->tx_timer.function = tx_timeout; + + init_timer(&info->status_timer); + info->status_timer.data = (unsigned long)info; + info->status_timer.function = status_timeout; + + /* Store the PCI9050 misc control register value because a flaw + * in the PCI9050 prevents LCR registers from being read if + * BIOS assigns an LCR base address with bit 7 set. + * + * Only the misc control register is accessed for which only + * write access is needed, so set an initial value and change + * bits to the device instance data as we write the value + * to the actual misc control register. + */ + info->misc_ctrl_value = 0x087e4546; + + /* initial port state is unknown - if startup errors + * occur, init_error will be set to indicate the + * problem. Once the port is fully initialized, + * this value will be set to 0 to indicate the + * port is available. + */ + info->init_error = -1; + } + + return info; +} + +void device_init(int adapter_num, struct pci_dev *pdev) +{ + SLMP_INFO *port_array[SCA_MAX_PORTS]; + int port; + + /* allocate device instances for up to SCA_MAX_PORTS devices */ + for ( port = 0; port < SCA_MAX_PORTS; ++port ) { + port_array[port] = alloc_dev(adapter_num,port,pdev); + if( port_array[port] == NULL ) { + for ( --port; port >= 0; --port ) + kfree(port_array[port]); + return; + } + } + + /* give copy of port_array to all ports and add to device list */ + for ( port = 0; port < SCA_MAX_PORTS; ++port ) { + memcpy(port_array[port]->port_array,port_array,sizeof(port_array)); + add_device( port_array[port] ); + spin_lock_init(&port_array[port]->lock); + } + + /* Allocate and claim adapter resources */ + if ( !claim_resources(port_array[0]) ) { + + alloc_dma_bufs(port_array[0]); + + /* copy resource information from first port to others */ + for ( port = 1; port < SCA_MAX_PORTS; ++port ) { + port_array[port]->lock = port_array[0]->lock; + port_array[port]->irq_level = port_array[0]->irq_level; + port_array[port]->memory_base = port_array[0]->memory_base; + port_array[port]->sca_base = port_array[0]->sca_base; + port_array[port]->statctrl_base = port_array[0]->statctrl_base; + port_array[port]->lcr_base = port_array[0]->lcr_base; + alloc_dma_bufs(port_array[port]); + } + + if ( request_irq(port_array[0]->irq_level, + synclinkmp_interrupt, + port_array[0]->irq_flags, + port_array[0]->device_name, + port_array[0]) < 0 ) { + printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n", + __FILE__,__LINE__, + port_array[0]->device_name, + port_array[0]->irq_level ); + } + else { + port_array[0]->irq_requested = 1; + adapter_test(port_array[0]); + } + } +} + +static struct tty_operations ops = { + .open = open, + .close = close, + .write = write, + .put_char = put_char, + .flush_chars = flush_chars, + .write_room = write_room, + .chars_in_buffer = chars_in_buffer, + .flush_buffer = flush_buffer, + .ioctl = ioctl, + .throttle = throttle, + .unthrottle = unthrottle, + .send_xchar = send_xchar, + .break_ctl = set_break, + .wait_until_sent = wait_until_sent, + .read_proc = read_proc, + .set_termios = set_termios, + .stop = tx_hold, + .start = tx_release, + .hangup = hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, +}; + +static void synclinkmp_cleanup(void) +{ + int rc; + SLMP_INFO *info; + SLMP_INFO *tmp; + + printk("Unloading %s %s\n", driver_name, driver_version); + + if (serial_driver) { + if ((rc = tty_unregister_driver(serial_driver))) + printk("%s(%d) failed to unregister tty driver err=%d\n", + __FILE__,__LINE__,rc); + put_tty_driver(serial_driver); + } + + /* reset devices */ + info = synclinkmp_device_list; + while(info) { + reset_port(info); + info = info->next_device; + } + + /* release devices */ + info = synclinkmp_device_list; + while(info) { +#ifdef CONFIG_HDLC + hdlcdev_exit(info); +#endif + free_dma_bufs(info); + free_tmp_rx_buf(info); + if ( info->port_num == 0 ) { + if (info->sca_base) + write_reg(info, LPR, 1); /* set low power mode */ + release_resources(info); + } + tmp = info; + info = info->next_device; + kfree(tmp); + } + + pci_unregister_driver(&synclinkmp_pci_driver); +} + +/* Driver initialization entry point. + */ + +static int __init synclinkmp_init(void) +{ + int rc; + + if (break_on_load) { + synclinkmp_get_text_ptr(); + BREAKPOINT(); + } + + printk("%s %s\n", driver_name, driver_version); + + if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) { + printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); + return rc; + } + + serial_driver = alloc_tty_driver(128); + if (!serial_driver) { + rc = -ENOMEM; + goto error; + } + + /* Initialize the tty_driver structure */ + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = "synclinkmp"; + serial_driver->name = "ttySLM"; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + printk("%s(%d):Couldn't register serial driver\n", + __FILE__,__LINE__); + put_tty_driver(serial_driver); + serial_driver = NULL; + goto error; + } + + printk("%s %s, tty major#%d\n", + driver_name, driver_version, + serial_driver->major); + + return 0; + +error: + synclinkmp_cleanup(); + return rc; +} + +static void __exit synclinkmp_exit(void) +{ + synclinkmp_cleanup(); +} + +module_init(synclinkmp_init); +module_exit(synclinkmp_exit); + +/* Set the port for internal loopback mode. + * The TxCLK and RxCLK signals are generated from the BRG and + * the TxD is looped back to the RxD internally. + */ +void enable_loopback(SLMP_INFO *info, int enable) +{ + if (enable) { + /* MD2 (Mode Register 2) + * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback + */ + write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0))); + + /* degate external TxC clock source */ + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + write_control_reg(info); + + /* RXS/TXS (Rx/Tx clock source) + * 07 Reserved, must be 0 + * 06..04 Clock Source, 100=BRG + * 03..00 Clock Divisor, 0000=1 + */ + write_reg(info, RXS, 0x40); + write_reg(info, TXS, 0x40); + + } else { + /* MD2 (Mode Register 2) + * 01..00 CNCT<1..0> Channel connection, 0=normal + */ + write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0))); + + /* RXS/TXS (Rx/Tx clock source) + * 07 Reserved, must be 0 + * 06..04 Clock Source, 000=RxC/TxC Pin + * 03..00 Clock Divisor, 0000=1 + */ + write_reg(info, RXS, 0x00); + write_reg(info, TXS, 0x00); + } + + /* set LinkSpeed if available, otherwise default to 2Mbps */ + if (info->params.clock_speed) + set_rate(info, info->params.clock_speed); + else + set_rate(info, 3686400); +} + +/* Set the baud rate register to the desired speed + * + * data_rate data rate of clock in bits per second + * A data rate of 0 disables the AUX clock. + */ +void set_rate( SLMP_INFO *info, u32 data_rate ) +{ + u32 TMCValue; + unsigned char BRValue; + u32 Divisor=0; + + /* fBRG = fCLK/(TMC * 2^BR) + */ + if (data_rate != 0) { + Divisor = 14745600/data_rate; + if (!Divisor) + Divisor = 1; + + TMCValue = Divisor; + + BRValue = 0; + if (TMCValue != 1 && TMCValue != 2) { + /* BRValue of 0 provides 50/50 duty cycle *only* when + * TMCValue is 1 or 2. BRValue of 1 to 9 always provides + * 50/50 duty cycle. + */ + BRValue = 1; + TMCValue >>= 1; + } + + /* while TMCValue is too big for TMC register, divide + * by 2 and increment BR exponent. + */ + for(; TMCValue > 256 && BRValue < 10; BRValue++) + TMCValue >>= 1; + + write_reg(info, TXS, + (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue)); + write_reg(info, RXS, + (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue)); + write_reg(info, TMC, (unsigned char)TMCValue); + } + else { + write_reg(info, TXS,0); + write_reg(info, RXS,0); + write_reg(info, TMC, 0); + } +} + +/* Disable receiver + */ +void rx_stop(SLMP_INFO *info) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s rx_stop()\n", + __FILE__,__LINE__, info->device_name ); + + write_reg(info, CMD, RXRESET); + + info->ie0_value &= ~RXRDYE; + write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */ + + write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ + write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ + write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */ + + info->rx_enabled = 0; + info->rx_overflow = 0; +} + +/* enable the receiver + */ +void rx_start(SLMP_INFO *info) +{ + int i; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s rx_start()\n", + __FILE__,__LINE__, info->device_name ); + + write_reg(info, CMD, RXRESET); + + if ( info->params.mode == MGSL_MODE_HDLC ) { + /* HDLC, disabe IRQ on rxdata */ + info->ie0_value &= ~RXRDYE; + write_reg(info, IE0, info->ie0_value); + + /* Reset all Rx DMA buffers and program rx dma */ + write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ + write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ + + for (i = 0; i < info->rx_buf_count; i++) { + info->rx_buf_list[i].status = 0xff; + + // throttle to 4 shared memory writes at a time to prevent + // hogging local bus (keep latency time for DMA requests low). + if (!(i % 4)) + read_status_reg(info); + } + info->current_rx_buf = 0; + + /* set current/1st descriptor address */ + write_reg16(info, RXDMA + CDA, + info->rx_buf_list_ex[0].phys_entry); + + /* set new last rx descriptor address */ + write_reg16(info, RXDMA + EDA, + info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry); + + /* set buffer length (shared by all rx dma data buffers) */ + write_reg16(info, RXDMA + BFL, SCABUFSIZE); + + write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */ + write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */ + } else { + /* async, enable IRQ on rxdata */ + info->ie0_value |= RXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + write_reg(info, CMD, RXENABLE); + + info->rx_overflow = FALSE; + info->rx_enabled = 1; +} + +/* Enable the transmitter and send a transmit frame if + * one is loaded in the DMA buffers. + */ +void tx_start(SLMP_INFO *info) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s tx_start() tx_count=%d\n", + __FILE__,__LINE__, info->device_name,info->tx_count ); + + if (!info->tx_enabled ) { + write_reg(info, CMD, TXRESET); + write_reg(info, CMD, TXENABLE); + info->tx_enabled = TRUE; + } + + if ( info->tx_count ) { + + /* If auto RTS enabled and RTS is inactive, then assert */ + /* RTS and set a flag indicating that the driver should */ + /* negate RTS when the transmission completes. */ + + info->drop_rts_on_tx_done = 0; + + if (info->params.mode != MGSL_MODE_ASYNC) { + + if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { + get_signals( info ); + if ( !(info->serial_signals & SerialSignal_RTS) ) { + info->serial_signals |= SerialSignal_RTS; + set_signals( info ); + info->drop_rts_on_tx_done = 1; + } + } + + write_reg16(info, TRC0, + (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level)); + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + /* set TX CDA (current descriptor address) */ + write_reg16(info, TXDMA + CDA, + info->tx_buf_list_ex[0].phys_entry); + + /* set TX EDA (last descriptor address) */ + write_reg16(info, TXDMA + EDA, + info->tx_buf_list_ex[info->last_tx_buf].phys_entry); + + /* enable underrun IRQ */ + info->ie1_value &= ~IDLE; + info->ie1_value |= UDRN; + write_reg(info, IE1, info->ie1_value); + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); + + write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */ + write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */ + + info->tx_timer.expires = jiffies + msecs_to_jiffies(5000); + add_timer(&info->tx_timer); + } + else { + tx_load_fifo(info); + /* async, enable IRQ on txdata */ + info->ie0_value |= TXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + info->tx_active = 1; + } +} + +/* stop the transmitter and DMA + */ +void tx_stop( SLMP_INFO *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s tx_stop()\n", + __FILE__,__LINE__, info->device_name ); + + del_timer(&info->tx_timer); + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + write_reg(info, CMD, TXRESET); + + info->ie1_value &= ~(UDRN + IDLE); + write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ + + info->ie0_value &= ~TXRDYE; + write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */ + + info->tx_enabled = 0; + info->tx_active = 0; +} + +/* Fill the transmit FIFO until the FIFO is full or + * there is no more data to load. + */ +void tx_load_fifo(SLMP_INFO *info) +{ + u8 TwoBytes[2]; + + /* do nothing is now tx data available and no XON/XOFF pending */ + + if ( !info->tx_count && !info->x_char ) + return; + + /* load the Transmit FIFO until FIFOs full or all data sent */ + + while( info->tx_count && (read_reg(info,SR0) & BIT1) ) { + + /* there is more space in the transmit FIFO and */ + /* there is more data in transmit buffer */ + + if ( (info->tx_count > 1) && !info->x_char ) { + /* write 16-bits */ + TwoBytes[0] = info->tx_buf[info->tx_get++]; + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + TwoBytes[1] = info->tx_buf[info->tx_get++]; + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + + write_reg16(info, TRB, *((u16 *)TwoBytes)); + + info->tx_count -= 2; + info->icount.tx += 2; + } else { + /* only 1 byte left to transmit or 1 FIFO slot left */ + + if (info->x_char) { + /* transmit pending high priority char */ + write_reg(info, TRB, info->x_char); + info->x_char = 0; + } else { + write_reg(info, TRB, info->tx_buf[info->tx_get++]); + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + info->tx_count--; + } + info->icount.tx++; + } + } +} + +/* Reset a port to a known state + */ +void reset_port(SLMP_INFO *info) +{ + if (info->sca_base) { + + tx_stop(info); + rx_stop(info); + + info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + set_signals(info); + + /* disable all port interrupts */ + info->ie0_value = 0; + info->ie1_value = 0; + info->ie2_value = 0; + write_reg(info, IE0, info->ie0_value); + write_reg(info, IE1, info->ie1_value); + write_reg(info, IE2, info->ie2_value); + + write_reg(info, CMD, CHRESET); + } +} + +/* Reset all the ports to a known state. + */ +void reset_adapter(SLMP_INFO *info) +{ + int i; + + for ( i=0; i < SCA_MAX_PORTS; ++i) { + if (info->port_array[i]) + reset_port(info->port_array[i]); + } +} + +/* Program port for asynchronous communications. + */ +void async_mode(SLMP_INFO *info) +{ + + unsigned char RegValue; + + tx_stop(info); + rx_stop(info); + + /* MD0, Mode Register 0 + * + * 07..05 PRCTL<2..0>, Protocol Mode, 000=async + * 04 AUTO, Auto-enable (RTS/CTS/DCD) + * 03 Reserved, must be 0 + * 02 CRCCC, CRC Calculation, 0=disabled + * 01..00 STOP<1..0> Stop bits (00=1,10=2) + * + * 0000 0000 + */ + RegValue = 0x00; + if (info->params.stop_bits != 1) + RegValue |= BIT1; + write_reg(info, MD0, RegValue); + + /* MD1, Mode Register 1 + * + * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64 + * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5 + * 03..02 RXCHR<1..0>, rx char size + * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd + * + * 0100 0000 + */ + RegValue = 0x40; + switch (info->params.data_bits) { + case 7: RegValue |= BIT4 + BIT2; break; + case 6: RegValue |= BIT5 + BIT3; break; + case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break; + } + if (info->params.parity != ASYNC_PARITY_NONE) { + RegValue |= BIT1; + if (info->params.parity == ASYNC_PARITY_ODD) + RegValue |= BIT0; + } + write_reg(info, MD1, RegValue); + + /* MD2, Mode Register 2 + * + * 07..02 Reserved, must be 0 + * 01..00 CNCT<1..0> Channel connection, 0=normal + * + * 0000 0000 + */ + RegValue = 0x00; + write_reg(info, MD2, RegValue); + + /* RXS, Receive clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=BIT6; + write_reg(info, RXS, RegValue); + + /* TXS, Transmit clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=BIT6; + write_reg(info, TXS, RegValue); + + /* Control Register + * + * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out + */ + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + write_control_reg(info); + + tx_set_idle(info); + + /* RRC Receive Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte + */ + write_reg(info, RRC, 0x00); + + /* TRC0 Transmit Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes + */ + write_reg(info, TRC0, 0x10); + + /* TRC1 Transmit Ready Control 1 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1) + */ + write_reg(info, TRC1, 0x1e); + + /* CTL, MSCI control register + * + * 07..06 Reserved, set to 0 + * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) + * 04 IDLC, idle control, 0=mark 1=idle register + * 03 BRK, break, 0=off 1 =on (async) + * 02 SYNCLD, sync char load enable (BSC) 1=enabled + * 01 GOP, go active on poll (LOOP mode) 1=enabled + * 00 RTS, RTS output control, 0=active 1=inactive + * + * 0001 0001 + */ + RegValue = 0x10; + if (!(info->serial_signals & SerialSignal_RTS)) + RegValue |= 0x01; + write_reg(info, CTL, RegValue); + + /* enable status interrupts */ + info->ie0_value |= TXINTE + RXINTE; + write_reg(info, IE0, info->ie0_value); + + /* enable break detect interrupt */ + info->ie1_value = BRKD; + write_reg(info, IE1, info->ie1_value); + + /* enable rx overrun interrupt */ + info->ie2_value = OVRN; + write_reg(info, IE2, info->ie2_value); + + set_rate( info, info->params.data_rate * 16 ); + + if (info->params.loopback) + enable_loopback(info,1); +} + +/* Program the SCA for HDLC communications. + */ +void hdlc_mode(SLMP_INFO *info) +{ + unsigned char RegValue; + u32 DpllDivisor; + + // Can't use DPLL because SCA outputs recovered clock on RxC when + // DPLL mode selected. This causes output contention with RxC receiver. + // Use of DPLL would require external hardware to disable RxC receiver + // when DPLL mode selected. + info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL); + + /* disable DMA interrupts */ + write_reg(info, TXDMA + DIR, 0); + write_reg(info, RXDMA + DIR, 0); + + /* MD0, Mode Register 0 + * + * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC + * 04 AUTO, Auto-enable (RTS/CTS/DCD) + * 03 Reserved, must be 0 + * 02 CRCCC, CRC Calculation, 1=enabled + * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16 + * 00 CRC0, CRC initial value, 1 = all 1s + * + * 1000 0001 + */ + RegValue = 0x81; + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + RegValue |= BIT4; + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + RegValue |= BIT4; + if (info->params.crc_type == HDLC_CRC_16_CCITT) + RegValue |= BIT2 + BIT1; + write_reg(info, MD0, RegValue); + + /* MD1, Mode Register 1 + * + * 07..06 ADDRS<1..0>, Address detect, 00=no addr check + * 05..04 TXCHR<1..0>, tx char size, 00=8 bits + * 03..02 RXCHR<1..0>, rx char size, 00=8 bits + * 01..00 PMPM<1..0>, Parity mode, 00=no parity + * + * 0000 0000 + */ + RegValue = 0x00; + write_reg(info, MD1, RegValue); + + /* MD2, Mode Register 2 + * + * 07 NRZFM, 0=NRZ, 1=FM + * 06..05 CODE<1..0> Encoding, 00=NRZ + * 04..03 DRATE<1..0> DPLL Divisor, 00=8 + * 02 Reserved, must be 0 + * 01..00 CNCT<1..0> Channel connection, 0=normal + * + * 0000 0000 + */ + RegValue = 0x00; + switch(info->params.encoding) { + case HDLC_ENCODING_NRZI: RegValue |= BIT5; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */ + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */ + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */ +#if 0 + case HDLC_ENCODING_NRZB: /* not supported */ + case HDLC_ENCODING_NRZI_MARK: /* not supported */ + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */ +#endif + } + if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { + DpllDivisor = 16; + RegValue |= BIT3; + } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { + DpllDivisor = 8; + } else { + DpllDivisor = 32; + RegValue |= BIT4; + } + write_reg(info, MD2, RegValue); + + + /* RXS, Receive clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=0; + if (info->params.flags & HDLC_FLAG_RXC_BRG) + RegValue |= BIT6; + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + RegValue |= BIT6 + BIT5; + write_reg(info, RXS, RegValue); + + /* TXS, Transmit clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=0; + if (info->params.flags & HDLC_FLAG_TXC_BRG) + RegValue |= BIT6; + if (info->params.flags & HDLC_FLAG_TXC_DPLL) + RegValue |= BIT6 + BIT5; + write_reg(info, TXS, RegValue); + + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + set_rate(info, info->params.clock_speed * DpllDivisor); + else + set_rate(info, info->params.clock_speed); + + /* GPDATA (General Purpose I/O Data Register) + * + * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out + */ + if (info->params.flags & HDLC_FLAG_TXC_BRG) + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + else + info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2)); + write_control_reg(info); + + /* RRC Receive Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 RRC<4..0> Rx FIFO trigger active + */ + write_reg(info, RRC, rx_active_fifo_level); + + /* TRC0 Transmit Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger active + */ + write_reg(info, TRC0, tx_active_fifo_level); + + /* TRC1 Transmit Ready Control 1 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full) + */ + write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1)); + + /* DMR, DMA Mode Register + * + * 07..05 Reserved, must be 0 + * 04 TMOD, Transfer Mode: 1=chained-block + * 03 Reserved, must be 0 + * 02 NF, Number of Frames: 1=multi-frame + * 01 CNTE, Frame End IRQ Counter enable: 0=disabled + * 00 Reserved, must be 0 + * + * 0001 0100 + */ + write_reg(info, TXDMA + DMR, 0x14); + write_reg(info, RXDMA + DMR, 0x14); + + /* Set chain pointer base (upper 8 bits of 24 bit addr) */ + write_reg(info, RXDMA + CPB, + (unsigned char)(info->buffer_list_phys >> 16)); + + /* Set chain pointer base (upper 8 bits of 24 bit addr) */ + write_reg(info, TXDMA + CPB, + (unsigned char)(info->buffer_list_phys >> 16)); + + /* enable status interrupts. other code enables/disables + * the individual sources for these two interrupt classes. + */ + info->ie0_value |= TXINTE + RXINTE; + write_reg(info, IE0, info->ie0_value); + + /* CTL, MSCI control register + * + * 07..06 Reserved, set to 0 + * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) + * 04 IDLC, idle control, 0=mark 1=idle register + * 03 BRK, break, 0=off 1 =on (async) + * 02 SYNCLD, sync char load enable (BSC) 1=enabled + * 01 GOP, go active on poll (LOOP mode) 1=enabled + * 00 RTS, RTS output control, 0=active 1=inactive + * + * 0001 0001 + */ + RegValue = 0x10; + if (!(info->serial_signals & SerialSignal_RTS)) + RegValue |= 0x01; + write_reg(info, CTL, RegValue); + + /* preamble not supported ! */ + + tx_set_idle(info); + tx_stop(info); + rx_stop(info); + + set_rate(info, info->params.clock_speed); + + if (info->params.loopback) + enable_loopback(info,1); +} + +/* Set the transmit HDLC idle mode + */ +void tx_set_idle(SLMP_INFO *info) +{ + unsigned char RegValue = 0xff; + + /* Map API idle mode to SCA register bits */ + switch(info->idle_mode) { + case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break; + case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break; + case HDLC_TXIDLE_ONES: RegValue = 0xff; break; + case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break; + case HDLC_TXIDLE_SPACE: RegValue = 0x00; break; + case HDLC_TXIDLE_MARK: RegValue = 0xff; break; + } + + write_reg(info, IDL, RegValue); +} + +/* Query the adapter for the state of the V24 status (input) signals. + */ +void get_signals(SLMP_INFO *info) +{ + u16 status = read_reg(info, SR3); + u16 gpstatus = read_status_reg(info); + u16 testbit; + + /* clear all serial signals except DTR and RTS */ + info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; + + /* set serial signal bits to reflect MISR */ + + if (!(status & BIT3)) + info->serial_signals |= SerialSignal_CTS; + + if ( !(status & BIT2)) + info->serial_signals |= SerialSignal_DCD; + + testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7> + if (!(gpstatus & testbit)) + info->serial_signals |= SerialSignal_RI; + + testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6> + if (!(gpstatus & testbit)) + info->serial_signals |= SerialSignal_DSR; +} + +/* Set the state of DTR and RTS based on contents of + * serial_signals member of device context. + */ +void set_signals(SLMP_INFO *info) +{ + unsigned char RegValue; + u16 EnableBit; + + RegValue = read_reg(info, CTL); + if (info->serial_signals & SerialSignal_RTS) + RegValue &= ~BIT0; + else + RegValue |= BIT0; + write_reg(info, CTL, RegValue); + + // Port 0..3 DTR is ctrl reg <1,3,5,7> + EnableBit = BIT1 << (info->port_num*2); + if (info->serial_signals & SerialSignal_DTR) + info->port_array[0]->ctrlreg_value &= ~EnableBit; + else + info->port_array[0]->ctrlreg_value |= EnableBit; + write_control_reg(info); +} + +/*******************/ +/* DMA Buffer Code */ +/*******************/ + +/* Set the count for all receive buffers to SCABUFSIZE + * and set the current buffer to the first buffer. This effectively + * makes all buffers free and discards any data in buffers. + */ +void rx_reset_buffers(SLMP_INFO *info) +{ + rx_free_frame_buffers(info, 0, info->rx_buf_count - 1); +} + +/* Free the buffers used by a received frame + * + * info pointer to device instance data + * first index of 1st receive buffer of frame + * last index of last receive buffer of frame + */ +void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) +{ + int done = 0; + + while(!done) { + /* reset current buffer for reuse */ + info->rx_buf_list[first].status = 0xff; + + if (first == last) { + done = 1; + /* set new last rx descriptor address */ + write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry); + } + + first++; + if (first == info->rx_buf_count) + first = 0; + } + + /* set current buffer to next buffer after last buffer of frame */ + info->current_rx_buf = first; +} + +/* Return a received frame from the receive DMA buffers. + * Only frames received without errors are returned. + * + * Return Value: 1 if frame returned, otherwise 0 + */ +int rx_get_frame(SLMP_INFO *info) +{ + unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ + unsigned short status; + unsigned int framesize = 0; + int ReturnCode = 0; + unsigned long flags; + struct tty_struct *tty = info->tty; + unsigned char addr_field = 0xff; + SCADESC *desc; + SCADESC_EX *desc_ex; + +CheckAgain: + /* assume no frame returned, set zero length */ + framesize = 0; + addr_field = 0xff; + + /* + * current_rx_buf points to the 1st buffer of the next available + * receive frame. To find the last buffer of the frame look for + * a non-zero status field in the buffer entries. (The status + * field is set by the 16C32 after completing a receive frame. + */ + StartIndex = EndIndex = info->current_rx_buf; + + for ( ;; ) { + desc = &info->rx_buf_list[EndIndex]; + desc_ex = &info->rx_buf_list_ex[EndIndex]; + + if (desc->status == 0xff) + goto Cleanup; /* current desc still in use, no frames available */ + + if (framesize == 0 && info->params.addr_filter != 0xff) + addr_field = desc_ex->virt_addr[0]; + + framesize += desc->length; + + /* Status != 0 means last buffer of frame */ + if (desc->status) + break; + + EndIndex++; + if (EndIndex == info->rx_buf_count) + EndIndex = 0; + + if (EndIndex == info->current_rx_buf) { + /* all buffers have been 'used' but none mark */ + /* the end of a frame. Reset buffers and receiver. */ + if ( info->rx_enabled ){ + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + goto Cleanup; + } + + } + + /* check status of receive frame */ + + /* frame status is byte stored after frame data + * + * 7 EOM (end of msg), 1 = last buffer of frame + * 6 Short Frame, 1 = short frame + * 5 Abort, 1 = frame aborted + * 4 Residue, 1 = last byte is partial + * 3 Overrun, 1 = overrun occurred during frame reception + * 2 CRC, 1 = CRC error detected + * + */ + status = desc->status; + + /* ignore CRC bit if not using CRC (bit is undefined) */ + /* Note:CRC is not save to data buffer */ + if (info->params.crc_type == HDLC_CRC_NONE) + status &= ~BIT2; + + if (framesize == 0 || + (addr_field != 0xff && addr_field != info->params.addr_filter)) { + /* discard 0 byte frames, this seems to occur sometime + * when remote is idling flags. + */ + rx_free_frame_buffers(info, StartIndex, EndIndex); + goto CheckAgain; + } + + if (framesize < 2) + status |= BIT6; + + if (status & (BIT6+BIT5+BIT3+BIT2)) { + /* received frame has errors, + * update counts and mark frame size as 0 + */ + if (status & BIT6) + info->icount.rxshort++; + else if (status & BIT5) + info->icount.rxabort++; + else if (status & BIT3) + info->icount.rxover++; + else + info->icount.rxcrc++; + + framesize = 0; +#ifdef CONFIG_HDLC + { + struct net_device_stats *stats = hdlc_stats(info->netdev); + stats->rx_errors++; + stats->rx_frame_errors++; + } +#endif + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr, + min_t(int, framesize,SCABUFSIZE),0); + + if (framesize) { + if (framesize > info->max_frame_size) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous intermediate buffer */ + int copy_count = framesize; + int index = StartIndex; + unsigned char *ptmp = info->tmp_rx_buf; + info->tmp_rx_buf_count = framesize; + + info->icount.rxok++; + + while(copy_count) { + int partial_count = min(copy_count,SCABUFSIZE); + memcpy( ptmp, + info->rx_buf_list_ex[index].virt_addr, + partial_count ); + ptmp += partial_count; + copy_count -= partial_count; + + if ( ++index == info->rx_buf_count ) + index = 0; + } + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_rx(info,info->tmp_rx_buf,framesize); + else +#endif + ldisc_receive_buf(tty,info->tmp_rx_buf, + info->flag_buf, framesize); + } + } + /* Free the buffers used by this frame. */ + rx_free_frame_buffers( info, StartIndex, EndIndex ); + + ReturnCode = 1; + +Cleanup: + if ( info->rx_enabled && info->rx_overflow ) { + /* Receiver is enabled, but needs to restarted due to + * rx buffer overflow. If buffers are empty, restart receiver. + */ + if (info->rx_buf_list[EndIndex].status == 0xff) { + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + } + + return ReturnCode; +} + +/* load the transmit DMA buffer with data + */ +void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) +{ + unsigned short copy_count; + unsigned int i = 0; + SCADESC *desc; + SCADESC_EX *desc_ex; + + if ( debug_level >= DEBUG_LEVEL_DATA ) + trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1); + + /* Copy source buffer to one or more DMA buffers, starting with + * the first transmit dma buffer. + */ + for(i=0;;) + { + copy_count = min_t(unsigned short,count,SCABUFSIZE); + + desc = &info->tx_buf_list[i]; + desc_ex = &info->tx_buf_list_ex[i]; + + load_pci_memory(info, desc_ex->virt_addr,buf,copy_count); + + desc->length = copy_count; + desc->status = 0; + + buf += copy_count; + count -= copy_count; + + if (!count) + break; + + i++; + if (i >= info->tx_buf_count) + i = 0; + } + + info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */ + info->last_tx_buf = ++i; +} + +int register_test(SLMP_INFO *info) +{ + static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96}; + static unsigned int count = sizeof(testval)/sizeof(unsigned char); + unsigned int i; + int rc = TRUE; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + + /* assume failure */ + info->init_error = DiagStatus_AddressFailure; + + /* Write bit patterns to various registers but do it out of */ + /* sync, then read back and verify values. */ + + for (i = 0 ; i < count ; i++) { + write_reg(info, TMC, testval[i]); + write_reg(info, IDL, testval[(i+1)%count]); + write_reg(info, SA0, testval[(i+2)%count]); + write_reg(info, SA1, testval[(i+3)%count]); + + if ( (read_reg(info, TMC) != testval[i]) || + (read_reg(info, IDL) != testval[(i+1)%count]) || + (read_reg(info, SA0) != testval[(i+2)%count]) || + (read_reg(info, SA1) != testval[(i+3)%count]) ) + { + rc = FALSE; + break; + } + } + + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +int irq_test(SLMP_INFO *info) +{ + unsigned long timeout; + unsigned long flags; + + unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + + /* assume failure */ + info->init_error = DiagStatus_IrqFailure; + info->irq_occurred = FALSE; + + /* setup timer0 on SCA0 to interrupt */ + + /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */ + write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4)); + + write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */ + write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */ + + + /* TMCS, Timer Control/Status Register + * + * 07 CMF, Compare match flag (read only) 1=match + * 06 ECMI, CMF Interrupt Enable: 1=enabled + * 05 Reserved, must be 0 + * 04 TME, Timer Enable + * 03..00 Reserved, must be 0 + * + * 0101 0000 + */ + write_reg(info, (unsigned char)(timer + TMCS), 0x50); + + spin_unlock_irqrestore(&info->lock,flags); + + timeout=100; + while( timeout-- && !info->irq_occurred ) { + msleep_interruptible(10); + } + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + return info->irq_occurred; +} + +/* initialize individual SCA device (2 ports) + */ +static int sca_init(SLMP_INFO *info) +{ + /* set wait controller to single mem partition (low), no wait states */ + write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */ + write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */ + write_reg(info, WCRL, 0); /* wait controller low range */ + write_reg(info, WCRM, 0); /* wait controller mid range */ + write_reg(info, WCRH, 0); /* wait controller high range */ + + /* DPCR, DMA Priority Control + * + * 07..05 Not used, must be 0 + * 04 BRC, bus release condition: 0=all transfers complete + * 03 CCC, channel change condition: 0=every cycle + * 02..00 PR<2..0>, priority 100=round robin + * + * 00000100 = 0x04 + */ + write_reg(info, DPCR, dma_priority); + + /* DMA Master Enable, BIT7: 1=enable all channels */ + write_reg(info, DMER, 0x80); + + /* enable all interrupt classes */ + write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */ + write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */ + write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */ + + /* ITCR, interrupt control register + * 07 IPC, interrupt priority, 0=MSCI->DMA + * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle + * 04 VOS, Vector Output, 0=unmodified vector + * 03..00 Reserved, must be 0 + */ + write_reg(info, ITCR, 0); + + return TRUE; +} + +/* initialize adapter hardware + */ +int init_adapter(SLMP_INFO *info) +{ + int i; + + /* Set BIT30 of Local Control Reg 0x50 to reset SCA */ + volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); + u32 readval; + + info->misc_ctrl_value |= BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* + * Force at least 170ns delay before clearing + * reset bit. Each read from LCR takes at least + * 30ns so 10 times for 300ns to be safe. + */ + for(i=0;i<10;i++) + readval = *MiscCtrl; + + info->misc_ctrl_value &= ~BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* init control reg (all DTRs off, all clksel=input) */ + info->ctrlreg_value = 0xaa; + write_control_reg(info); + + { + volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c); + lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3); + + switch(read_ahead_count) + { + case 16: + lcr1_brdr_value |= BIT5 + BIT4 + BIT3; + break; + case 8: + lcr1_brdr_value |= BIT5 + BIT4; + break; + case 4: + lcr1_brdr_value |= BIT5 + BIT3; + break; + case 0: + lcr1_brdr_value |= BIT5; + break; + } + + *LCR1BRDR = lcr1_brdr_value; + *MiscCtrl = misc_ctrl_value; + } + + sca_init(info->port_array[0]); + sca_init(info->port_array[2]); + + return TRUE; +} + +/* Loopback an HDLC frame to test the hardware + * interrupt and DMA functions. + */ +int loopback_test(SLMP_INFO *info) +{ +#define TESTFRAMESIZE 20 + + unsigned long timeout; + u16 count = TESTFRAMESIZE; + unsigned char buf[TESTFRAMESIZE]; + int rc = FALSE; + unsigned long flags; + + struct tty_struct *oldtty = info->tty; + u32 speed = info->params.clock_speed; + + info->params.clock_speed = 3686400; + info->tty = NULL; + + /* assume failure */ + info->init_error = DiagStatus_DmaFailure; + + /* build and send transmit frame */ + for (count = 0; count < TESTFRAMESIZE;++count) + buf[count] = (unsigned char)count; + + memset(info->tmp_rx_buf,0,TESTFRAMESIZE); + + /* program hardware for HDLC and enabled receiver */ + spin_lock_irqsave(&info->lock,flags); + hdlc_mode(info); + enable_loopback(info,1); + rx_start(info); + info->tx_count = count; + tx_load_dma_buffer(info,buf,count); + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + + /* wait for receive complete */ + /* Set a timeout for waiting for interrupt. */ + for ( timeout = 100; timeout; --timeout ) { + msleep_interruptible(10); + + if (rx_get_frame(info)) { + rc = TRUE; + break; + } + } + + /* verify received frame length and contents */ + if (rc == TRUE && + ( info->tmp_rx_buf_count != count || + memcmp(buf, info->tmp_rx_buf,count))) { + rc = FALSE; + } + + spin_lock_irqsave(&info->lock,flags); + reset_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->params.clock_speed = speed; + info->tty = oldtty; + + return rc; +} + +/* Perform diagnostics on hardware + */ +int adapter_test( SLMP_INFO *info ) +{ + unsigned long flags; + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):Testing device %s\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->lock,flags); + init_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->port_array[0]->port_count = 0; + + if ( register_test(info->port_array[0]) && + register_test(info->port_array[1])) { + + info->port_array[0]->port_count = 2; + + if ( register_test(info->port_array[2]) && + register_test(info->port_array[3]) ) + info->port_array[0]->port_count += 2; + } + else { + printk( "%s(%d):Register test failure for device %s Addr=%08lX\n", + __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base)); + return -ENODEV; + } + + if ( !irq_test(info->port_array[0]) || + !irq_test(info->port_array[1]) || + (info->port_count == 4 && !irq_test(info->port_array[2])) || + (info->port_count == 4 && !irq_test(info->port_array[3]))) { + printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); + return -ENODEV; + } + + if (!loopback_test(info->port_array[0]) || + !loopback_test(info->port_array[1]) || + (info->port_count == 4 && !loopback_test(info->port_array[2])) || + (info->port_count == 4 && !loopback_test(info->port_array[3]))) { + printk( "%s(%d):DMA test failure for device %s\n", + __FILE__,__LINE__,info->device_name); + return -ENODEV; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):device %s passed diagnostics\n", + __FILE__,__LINE__,info->device_name ); + + info->port_array[0]->init_error = 0; + info->port_array[1]->init_error = 0; + if ( info->port_count > 2 ) { + info->port_array[2]->init_error = 0; + info->port_array[3]->init_error = 0; + } + + return 0; +} + +/* Test the shared memory on a PCI adapter. + */ +int memory_test(SLMP_INFO *info) +{ + static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; + unsigned long count = sizeof(testval)/sizeof(unsigned long); + unsigned long i; + unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long); + unsigned long * addr = (unsigned long *)info->memory_base; + + /* Test data lines with test pattern at one location. */ + + for ( i = 0 ; i < count ; i++ ) { + *addr = testval[i]; + if ( *addr != testval[i] ) + return FALSE; + } + + /* Test address lines with incrementing pattern over */ + /* entire address range. */ + + for ( i = 0 ; i < limit ; i++ ) { + *addr = i * 4; + addr++; + } + + addr = (unsigned long *)info->memory_base; + + for ( i = 0 ; i < limit ; i++ ) { + if ( *addr != i * 4 ) + return FALSE; + addr++; + } + + memset( info->memory_base, 0, SCA_MEM_SIZE ); + return TRUE; +} + +/* Load data into PCI adapter shared memory. + * + * The PCI9050 releases control of the local bus + * after completing the current read or write operation. + * + * While the PCI9050 write FIFO not empty, the + * PCI9050 treats all of the writes as a single transaction + * and does not release the bus. This causes DMA latency problems + * at high speeds when copying large data blocks to the shared memory. + * + * This function breaks a write into multiple transations by + * interleaving a read which flushes the write FIFO and 'completes' + * the write transation. This allows any pending DMA request to gain control + * of the local bus in a timely fasion. + */ +void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) +{ + /* A load interval of 16 allows for 4 32-bit writes at */ + /* 136ns each for a maximum latency of 542ns on the local bus.*/ + + unsigned short interval = count / sca_pci_load_interval; + unsigned short i; + + for ( i = 0 ; i < interval ; i++ ) + { + memcpy(dest, src, sca_pci_load_interval); + read_status_reg(info); + dest += sca_pci_load_interval; + src += sca_pci_load_interval; + } + + memcpy(dest, src, count % sca_pci_load_interval); +} + +void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) +{ + int i; + int linecount; + if (xmit) + printk("%s tx data:\n",info->device_name); + else + printk("%s rx data:\n",info->device_name); + + while(count) { + if (count > 16) + linecount = 16; + else + linecount = count; + + for(i=0;i<linecount;i++) + printk("%02X ",(unsigned char)data[i]); + for(;i<17;i++) + printk(" "); + for(i=0;i<linecount;i++) { + if (data[i]>=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + + data += linecount; + count -= linecount; + } +} /* end of trace_block() */ + +/* called when HDLC frame times out + * update stats and do tx completion processing + */ +void tx_timeout(unsigned long context) +{ + SLMP_INFO *info = (SLMP_INFO*)context; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s tx_timeout()\n", + __FILE__,__LINE__,info->device_name); + if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->lock,flags); + info->tx_active = 0; + info->tx_count = info->tx_put = info->tx_get = 0; + + spin_unlock_irqrestore(&info->lock,flags); + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + bh_transmit(info); +} + +/* called to periodically check the DSR/RI modem signal input status + */ +void status_timeout(unsigned long context) +{ + u16 status = 0; + SLMP_INFO *info = (SLMP_INFO*)context; + unsigned long flags; + unsigned char delta; + + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + /* check for DSR/RI state change */ + + delta = info->old_signals ^ info->serial_signals; + info->old_signals = info->serial_signals; + + if (delta & SerialSignal_DSR) + status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR); + + if (delta & SerialSignal_RI) + status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI); + + if (delta & SerialSignal_DCD) + status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD); + + if (delta & SerialSignal_CTS) + status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS); + + if (status) + isr_io_pin(info,status); + + info->status_timer.data = (unsigned long)info; + info->status_timer.function = status_timeout; + info->status_timer.expires = jiffies + msecs_to_jiffies(10); + add_timer(&info->status_timer); +} + + +/* Register Access Routines - + * All registers are memory mapped + */ +#define CALC_REGADDR() \ + unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \ + if (info->port_num > 1) \ + RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \ + if ( info->port_num & 1) { \ + if (Addr > 0x7f) \ + RegAddr += 0x40; /* DMA access */ \ + else if (Addr > 0x1f && Addr < 0x60) \ + RegAddr += 0x20; /* MSCI access */ \ + } + + +unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) +{ + CALC_REGADDR(); + return *RegAddr; +} +void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) +{ + CALC_REGADDR(); + *RegAddr = Value; +} + +u16 read_reg16(SLMP_INFO * info, unsigned char Addr) +{ + CALC_REGADDR(); + return *((u16 *)RegAddr); +} + +void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) +{ + CALC_REGADDR(); + *((u16 *)RegAddr) = Value; +} + +unsigned char read_status_reg(SLMP_INFO * info) +{ + unsigned char *RegAddr = (unsigned char *)info->statctrl_base; + return *RegAddr; +} + +void write_control_reg(SLMP_INFO * info) +{ + unsigned char *RegAddr = (unsigned char *)info->statctrl_base; + *RegAddr = info->port_array[0]->ctrlreg_value; +} + + +static int __devinit synclinkmp_init_one (struct pci_dev *dev, + const struct pci_device_id *ent) +{ + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + device_init( ++synclinkmp_adapter_count, dev ); + return 0; +} + +static void __devexit synclinkmp_remove_one (struct pci_dev *dev) +{ +} |