[PATCH] lindent rio drivers

Run all rio files through indent -kr -i8 -bri0 -l255, as requested by Alan.

rioboot.c and rioinit.c were skipped due to worrisome lindent warnings.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 731 insertions, 774 deletions

diff --git a/drivers/char/rio/riointr.c b/drivers/char/rio/riointr.c
index ddda9c14e05..34d8787557a 100644
--- a/drivers/char/rio/riointr.c
+++ b/drivers/char/rio/riointr.c
@@ -88,99 +88,93 @@ static char *_riointr_c_sccs_ = "@(#)riointr.c	1.2";
 static void RIOReceive(struct rio_info *, struct Port *);
 
 
-static char *firstchars (char *p, int nch)
+static char *firstchars(char *p, int nch)
 {
-  static char buf[2][128];
-  static int t=0;
-  t = ! t;
-  memcpy (buf[t], p, nch);
-  buf[t][nch] = 0;
-  return buf[t];
+	static char buf[2][128];
+	static int t = 0;
+	t = !t;
+	memcpy(buf[t], p, nch);
+	buf[t][nch] = 0;
+	return buf[t];
 }
 
 
 #define	INCR( P, I )	((P) = (((P)+(I)) & p->RIOBufferMask))
 /* Enable and start the transmission of packets */
-void
-RIOTxEnable(en)
-char *		en;
+void RIOTxEnable(en)
+char *en;
 {
-  struct Port *	PortP;
-  struct rio_info *p;
-  struct tty_struct* tty;
-  int c;
-  struct PKT *	PacketP;
-  unsigned long flags;
-
-  PortP = (struct Port *)en; 
-  p = (struct rio_info *)PortP->p;
-  tty = PortP->gs.tty;
-
-
-  rio_dprintk (RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", 
-	      PortP->PortNum, PortP->gs.xmit_cnt);
-
-  if (!PortP->gs.xmit_cnt) return;
-  
-
-  /* This routine is an order of magnitude simpler than the specialix
-     version. One of the disadvantages is that this version will send
-     an incomplete packet (usually 64 bytes instead of 72) once for
-     every 4k worth of data. Let's just say that this won't influence
-     performance significantly..... */
-
-  rio_spin_lock_irqsave(&PortP->portSem, flags);
-
-  while (can_add_transmit( &PacketP, PortP )) {
-    c = PortP->gs.xmit_cnt;
-    if (c > PKT_MAX_DATA_LEN) c = PKT_MAX_DATA_LEN;
-
-    /* Don't copy past the end of the source buffer */
-    if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail) 
-      c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail;
-
-    { int t;
-    t = (c > 10)?10:c;
-    
-    rio_dprintk (RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", 
-		 PortP->PortNum, c, 
-		 firstchars (PortP->gs.xmit_buf + PortP->gs.xmit_tail      , t),
-		 firstchars (PortP->gs.xmit_buf + PortP->gs.xmit_tail + c-t, t));
-    }
-    /* If for one reason or another, we can't copy more data, 
-       we're done! */
-    if (c == 0) break;
-
-    rio_memcpy_toio (PortP->HostP->Caddr, (caddr_t)PacketP->data, 
-		 PortP->gs.xmit_buf + PortP->gs.xmit_tail, c);
-    /*    udelay (1); */
-
-    writeb (c, &(PacketP->len));
-    if (!( PortP->State & RIO_DELETED ) ) {
-      add_transmit ( PortP );
-      /*
-      ** Count chars tx'd for port statistics reporting
-      */
-      if ( PortP->statsGather )
-	PortP->txchars += c;
-    }
-    PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE-1);
-    PortP->gs.xmit_cnt -= c;
-  }
-
-  rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-
-  if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2*PKT_MAX_DATA_LEN)) {
-    rio_dprintk (RIO_DEBUG_INTR, "Waking up.... ldisc:%d (%d/%d)....",
-		 (int)(PortP->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)),
-		 PortP->gs.wakeup_chars, PortP->gs.xmit_cnt); 
-    if ((PortP->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-	PortP->gs.tty->ldisc.write_wakeup)
-      (PortP->gs.tty->ldisc.write_wakeup)(PortP->gs.tty);
-    rio_dprintk (RIO_DEBUG_INTR, "(%d/%d)\n",
-		PortP->gs.wakeup_chars, PortP->gs.xmit_cnt); 
-    wake_up_interruptible(&PortP->gs.tty->write_wait);
-  }
+	struct Port *PortP;
+	struct rio_info *p;
+	struct tty_struct *tty;
+	int c;
+	struct PKT *PacketP;
+	unsigned long flags;
+
+	PortP = (struct Port *) en;
+	p = (struct rio_info *) PortP->p;
+	tty = PortP->gs.tty;
+
+
+	rio_dprintk(RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", PortP->PortNum, PortP->gs.xmit_cnt);
+
+	if (!PortP->gs.xmit_cnt)
+		return;
+
+
+	/* This routine is an order of magnitude simpler than the specialix
+	   version. One of the disadvantages is that this version will send
+	   an incomplete packet (usually 64 bytes instead of 72) once for
+	   every 4k worth of data. Let's just say that this won't influence
+	   performance significantly..... */
+
+	rio_spin_lock_irqsave(&PortP->portSem, flags);
+
+	while (can_add_transmit(&PacketP, PortP)) {
+		c = PortP->gs.xmit_cnt;
+		if (c > PKT_MAX_DATA_LEN)
+			c = PKT_MAX_DATA_LEN;
+
+		/* Don't copy past the end of the source buffer */
+		if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail)
+			c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail;
+
+		{
+			int t;
+			t = (c > 10) ? 10 : c;
+
+			rio_dprintk(RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", PortP->PortNum, c, firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail, t), firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail + c - t, t));
+		}
+		/* If for one reason or another, we can't copy more data,
+		   we're done! */
+		if (c == 0)
+			break;
+
+		rio_memcpy_toio(PortP->HostP->Caddr, (caddr_t) PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c);
+		/*    udelay (1); */
+
+		writeb(c, &(PacketP->len));
+		if (!(PortP->State & RIO_DELETED)) {
+			add_transmit(PortP);
+			/*
+			 ** Count chars tx'd for port statistics reporting
+			 */
+			if (PortP->statsGather)
+				PortP->txchars += c;
+		}
+		PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE - 1);
+		PortP->gs.xmit_cnt -= c;
+	}
+
+	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
+
+	if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2 * PKT_MAX_DATA_LEN)) {
+		rio_dprintk(RIO_DEBUG_INTR, "Waking up.... ldisc:%d (%d/%d)....", (int) (PortP->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)), PortP->gs.wakeup_chars, PortP->gs.xmit_cnt);
+		if ((PortP->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && PortP->gs.tty->ldisc.write_wakeup)
+			(PortP->gs.tty->ldisc.write_wakeup) (PortP->gs.tty);
+		rio_dprintk(RIO_DEBUG_INTR, "(%d/%d)\n", PortP->gs.wakeup_chars, PortP->gs.xmit_cnt);
+		wake_up_interruptible(&PortP->gs.tty->write_wait);
+	}
 
 }
 
@@ -189,361 +183,349 @@ char *		en;
 ** RIO Host Service routine. Does all the work traditionally associated with an
 ** interrupt.
 */
-static int	RupIntr;
-static int	RxIntr;
-static int	TxIntr;
-void
-RIOServiceHost(p, HostP, From)
-struct rio_info *	p;
+static int RupIntr;
+static int RxIntr;
+static int TxIntr;
+void RIOServiceHost(p, HostP, From)
+struct rio_info *p;
 struct Host *HostP;
-int From; 
+int From;
 {
-  rio_spin_lock (&HostP->HostLock);
-  if ( (HostP->Flags & RUN_STATE) != RC_RUNNING ) { 
-    static int t =0;
-    rio_spin_unlock (&HostP->HostLock); 
-    if ((t++ % 200) == 0)
-      rio_dprintk (RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int)HostP->Flags);
-    return;
-  }
-  rio_spin_unlock (&HostP->HostLock); 
-
-  if ( RWORD( HostP->ParmMapP->rup_intr ) ) {
-    WWORD( HostP->ParmMapP->rup_intr , 0 );
-    p->RIORupCount++;
-    RupIntr++;
-    rio_dprintk (RIO_DEBUG_INTR, "rio: RUP interrupt on host %d\n", HostP-p->RIOHosts);
-    RIOPollHostCommands(p, HostP );
-  }
-
-  if ( RWORD( HostP->ParmMapP->rx_intr ) ) {
-    int port;
-
-    WWORD( HostP->ParmMapP->rx_intr , 0 );
-    p->RIORxCount++;
-    RxIntr++;
-
-    rio_dprintk (RIO_DEBUG_INTR, "rio: RX interrupt on host %d\n", HostP-p->RIOHosts);
-    /*
-    ** Loop through every port. If the port is mapped into
-    ** the system ( i.e. has /dev/ttyXXXX associated ) then it is
-    ** worth checking. If the port isn't open, grab any packets
-    ** hanging on its receive queue and stuff them on the free
-    ** list; check for commands on the way.
-    */
-    for ( port=p->RIOFirstPortsBooted; 
-	  port<p->RIOLastPortsBooted+PORTS_PER_RTA; port++ ) {
-      struct Port *PortP = p->RIOPortp[port];
-      struct tty_struct *ttyP;
-      struct PKT *PacketP;
-		
-      /*
-      ** not mapped in - most of the RIOPortp[] information
-      ** has not been set up!
-      ** Optimise: ports come in bundles of eight.
-      */
-      if ( !PortP->Mapped ) {
-	port += 7;
-	continue; /* with the next port */
-      }
-
-      /*
-      ** If the host board isn't THIS host board, check the next one.
-      ** optimise: ports come in bundles of eight.
-      */
-      if ( PortP->HostP != HostP ) {
-	port += 7;
-	continue;
-      }
-
-      /*
-      ** Let us see - is the port open? If not, then don't service it.
-      */
-      if ( !( PortP->PortState & PORT_ISOPEN ) ) {
-	continue;
-      }
-
-      /*
-      ** find corresponding tty structure. The process of mapping
-      ** the ports puts these here.
-      */
-      ttyP = PortP->gs.tty;
-
-      /*
-      ** Lock the port before we begin working on it.
-      */
-      rio_spin_lock(&PortP->portSem);
-
-      /*
-      ** Process received data if there is any.
-      */
-      if ( can_remove_receive( &PacketP, PortP ) )
-	RIOReceive(p, PortP);
-
-      /*
-      ** If there is no data left to be read from the port, and
-      ** it's handshake bit is set, then we must clear the handshake,
-      ** so that that downstream RTA is re-enabled.
-      */
-      if ( !can_remove_receive( &PacketP, PortP ) && 
-	   ( RWORD( PortP->PhbP->handshake )==PHB_HANDSHAKE_SET ) ) {
+	rio_spin_lock(&HostP->HostLock);
+	if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
+		static int t = 0;
+		rio_spin_unlock(&HostP->HostLock);
+		if ((t++ % 200) == 0)
+			rio_dprintk(RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int) HostP->Flags);
+		return;
+	}
+	rio_spin_unlock(&HostP->HostLock);
+
+	if (RWORD(HostP->ParmMapP->rup_intr)) {
+		WWORD(HostP->ParmMapP->rup_intr, 0);
+		p->RIORupCount++;
+		RupIntr++;
+		rio_dprintk(RIO_DEBUG_INTR, "rio: RUP interrupt on host %d\n", HostP - p->RIOHosts);
+		RIOPollHostCommands(p, HostP);
+	}
+
+	if (RWORD(HostP->ParmMapP->rx_intr)) {
+		int port;
+
+		WWORD(HostP->ParmMapP->rx_intr, 0);
+		p->RIORxCount++;
+		RxIntr++;
+
+		rio_dprintk(RIO_DEBUG_INTR, "rio: RX interrupt on host %d\n", HostP - p->RIOHosts);
+		/*
+		 ** Loop through every port. If the port is mapped into
+		 ** the system ( i.e. has /dev/ttyXXXX associated ) then it is
+		 ** worth checking. If the port isn't open, grab any packets
+		 ** hanging on its receive queue and stuff them on the free
+		 ** list; check for commands on the way.
+		 */
+		for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
+			struct Port *PortP = p->RIOPortp[port];
+			struct tty_struct *ttyP;
+			struct PKT *PacketP;
+
+			/*
+			 ** not mapped in - most of the RIOPortp[] information
+			 ** has not been set up!
+			 ** Optimise: ports come in bundles of eight.
+			 */
+			if (!PortP->Mapped) {
+				port += 7;
+				continue;	/* with the next port */
+			}
+
+			/*
+			 ** If the host board isn't THIS host board, check the next one.
+			 ** optimise: ports come in bundles of eight.
+			 */
+			if (PortP->HostP != HostP) {
+				port += 7;
+				continue;
+			}
+
+			/*
+			 ** Let us see - is the port open? If not, then don't service it.
+			 */
+			if (!(PortP->PortState & PORT_ISOPEN)) {
+				continue;
+			}
+
+			/*
+			 ** find corresponding tty structure. The process of mapping
+			 ** the ports puts these here.
+			 */
+			ttyP = PortP->gs.tty;
+
+			/*
+			 ** Lock the port before we begin working on it.
+			 */
+			rio_spin_lock(&PortP->portSem);
+
+			/*
+			 ** Process received data if there is any.
+			 */
+			if (can_remove_receive(&PacketP, PortP))
+				RIOReceive(p, PortP);
+
+			/*
+			 ** If there is no data left to be read from the port, and
+			 ** it's handshake bit is set, then we must clear the handshake,
+			 ** so that that downstream RTA is re-enabled.
+			 */
+			if (!can_remove_receive(&PacketP, PortP) && (RWORD(PortP->PhbP->handshake) == PHB_HANDSHAKE_SET)) {
 				/*
-				** MAGIC! ( Basically, handshake the RX buffer, so that
-				** the RTAs upstream can be re-enabled. )
-				*/
-	rio_dprintk (RIO_DEBUG_INTR, "Set RX handshake bit\n");
-	WWORD( PortP->PhbP->handshake, 
-	       PHB_HANDSHAKE_SET|PHB_HANDSHAKE_RESET );
-      }
-      rio_spin_unlock(&PortP->portSem);
-    }
-  }
-
-  if ( RWORD( HostP->ParmMapP->tx_intr ) ) {
-    int port;
-
-    WWORD( HostP->ParmMapP->tx_intr , 0);
-
-    p->RIOTxCount++;
-    TxIntr++;
-    rio_dprintk (RIO_DEBUG_INTR, "rio: TX interrupt on host %d\n", HostP-p->RIOHosts);
-
-    /*
-    ** Loop through every port.
-    ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX
-    ** associated ) then it is worth checking.
-    */
-    for ( port=p->RIOFirstPortsBooted; 
-	  port<p->RIOLastPortsBooted+PORTS_PER_RTA; port++ ) {
-      struct Port *PortP = p->RIOPortp[port];
-      struct tty_struct *ttyP;
-      struct PKT *PacketP;
-
-      /*
-      ** not mapped in - most of the RIOPortp[] information
-      ** has not been set up!
-      */
-      if ( !PortP->Mapped ) {
-	port += 7;
-	continue; /* with the next port */
-      }
-
-      /*
-      ** If the host board isn't running, then its data structures
-      ** are no use to us - continue quietly.
-      */
-      if ( PortP->HostP != HostP ) {
-	port += 7;
-	continue; /* with the next port */
-      }
-
-      /*
-      ** Let us see - is the port open? If not, then don't service it.
-      */
-      if ( !( PortP->PortState & PORT_ISOPEN ) ) {
-	continue;
-      }
-
-      rio_dprintk (RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port);
-      /*
-      ** Lock the port before we begin working on it.
-      */
-      rio_spin_lock(&PortP->portSem);
-
-      /*
-      ** If we can't add anything to the transmit queue, then
-      ** we need do none of this processing.
-      */
-      if ( !can_add_transmit( &PacketP, PortP ) ) {
-	rio_dprintk (RIO_DEBUG_INTR, "Can't add to port, so skipping.\n");
-	rio_spin_unlock(&PortP->portSem);
-	continue;
-      }
-
-      /*
-      ** find corresponding tty structure. The process of mapping
-      ** the ports puts these here.
-      */
-      ttyP = PortP->gs.tty;
-      /* If ttyP is NULL, the port is getting closed. Forget about it. */
-      if (!ttyP) {
-	rio_dprintk (RIO_DEBUG_INTR, "no tty, so skipping.\n");
-	rio_spin_unlock(&PortP->portSem);
-	continue;
-      }
-      /*
-      ** If there is more room available we start up the transmit
-      ** data process again. This can be direct I/O, if the cookmode
-      ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the
-      ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch
-      ** characters via the line discipline. We must always call
-      ** the line discipline,
-      ** so that user input characters can be echoed correctly.
-      **
-      ** ++++ Update +++++
-      ** With the advent of double buffering, we now see if
-      ** TxBufferOut-In is non-zero. If so, then we copy a packet
-      ** to the output place, and set it going. If this empties
-      ** the buffer, then we must issue a wakeup( ) on OUT.
-      ** If it frees space in the buffer then we must issue
-      ** a wakeup( ) on IN.
-      **
-      ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we
-      ** have to send a WFLUSH command down the PHB, to mark the
-      ** end point of a WFLUSH. We also need to clear out any
-      ** data from the double buffer! ( note that WflushFlag is a
-      ** *count* of the number of WFLUSH commands outstanding! )
-      **
-      ** ++++ And there's more!
-      ** If an RTA is powered off, then on again, and rebooted,
-      ** whilst it has ports open, then we need to re-open the ports.
-      ** ( reasonable enough ). We can't do this when we spot the
-      ** re-boot, in interrupt time, because the queue is probably
-      ** full. So, when we come in here, we need to test if any
-      ** ports are in this condition, and re-open the port before
-      ** we try to send any more data to it. Now, the re-booted
-      ** RTA will be discarding packets from the PHB until it
-      ** receives this open packet, but don't worry tooo much
-      ** about that. The one thing that is interesting is the
-      ** combination of this effect and the WFLUSH effect!
-      */
-      /* For now don't handle RTA reboots. -- REW. 
-	 Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */
-      if ( PortP->MagicFlags ) {
-#if 1
-	if ( PortP->MagicFlags & MAGIC_REBOOT ) {
-	  /*
-	  ** well, the RTA has been rebooted, and there is room
-	  ** on its queue to add the open packet that is required.
-	  **
-	  ** The messy part of this line is trying to decide if
-	  ** we need to call the Param function as a tty or as
-	  ** a modem.
-	  ** DONT USE CLOCAL AS A TEST FOR THIS!
-	  **
-	  ** If we can't param the port, then move on to the
-	  ** next port.
-	  */
-	  PortP->InUse = NOT_INUSE;
-
-	  rio_spin_unlock(&PortP->portSem);
-	  if ( RIOParam(PortP, OPEN, ((PortP->Cor2Copy & 
-				       (COR2_RTSFLOW|COR2_CTSFLOW ) )== 
-				      (COR2_RTSFLOW|COR2_CTSFLOW ) ) ? 
-			TRUE : FALSE, DONT_SLEEP ) == RIO_FAIL ) {
-	    continue; /* with next port */
-	  }
-	  rio_spin_lock(&PortP->portSem);
-	  PortP->MagicFlags &= ~MAGIC_REBOOT;
+				 ** MAGIC! ( Basically, handshake the RX buffer, so that
+				 ** the RTAs upstream can be re-enabled. )
+				 */
+				rio_dprintk(RIO_DEBUG_INTR, "Set RX handshake bit\n");
+				WWORD(PortP->PhbP->handshake, PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET);
+			}
+			rio_spin_unlock(&PortP->portSem);
+		}
 	}
+
+	if (RWORD(HostP->ParmMapP->tx_intr)) {
+		int port;
+
+		WWORD(HostP->ParmMapP->tx_intr, 0);
+
+		p->RIOTxCount++;
+		TxIntr++;
+		rio_dprintk(RIO_DEBUG_INTR, "rio: TX interrupt on host %d\n", HostP - p->RIOHosts);
+
+		/*
+		 ** Loop through every port.
+		 ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX
+		 ** associated ) then it is worth checking.
+		 */
+		for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
+			struct Port *PortP = p->RIOPortp[port];
+			struct tty_struct *ttyP;
+			struct PKT *PacketP;
+
+			/*
+			 ** not mapped in - most of the RIOPortp[] information
+			 ** has not been set up!
+			 */
+			if (!PortP->Mapped) {
+				port += 7;
+				continue;	/* with the next port */
+			}
+
+			/*
+			 ** If the host board isn't running, then its data structures
+			 ** are no use to us - continue quietly.
+			 */
+			if (PortP->HostP != HostP) {
+				port += 7;
+				continue;	/* with the next port */
+			}
+
+			/*
+			 ** Let us see - is the port open? If not, then don't service it.
+			 */
+			if (!(PortP->PortState & PORT_ISOPEN)) {
+				continue;
+			}
+
+			rio_dprintk(RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port);
+			/*
+			 ** Lock the port before we begin working on it.
+			 */
+			rio_spin_lock(&PortP->portSem);
+
+			/*
+			 ** If we can't add anything to the transmit queue, then
+			 ** we need do none of this processing.
+			 */
+			if (!can_add_transmit(&PacketP, PortP)) {
+				rio_dprintk(RIO_DEBUG_INTR, "Can't add to port, so skipping.\n");
+				rio_spin_unlock(&PortP->portSem);
+				continue;
+			}
+
+			/*
+			 ** find corresponding tty structure. The process of mapping
+			 ** the ports puts these here.
+			 */
+			ttyP = PortP->gs.tty;
+			/* If ttyP is NULL, the port is getting closed. Forget about it. */
+			if (!ttyP) {
+				rio_dprintk(RIO_DEBUG_INTR, "no tty, so skipping.\n");
+				rio_spin_unlock(&PortP->portSem);
+				continue;
+			}
+			/*
+			 ** If there is more room available we start up the transmit
+			 ** data process again. This can be direct I/O, if the cookmode
+			 ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the
+			 ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch
+			 ** characters via the line discipline. We must always call
+			 ** the line discipline,
+			 ** so that user input characters can be echoed correctly.
+			 **
+			 ** ++++ Update +++++
+			 ** With the advent of double buffering, we now see if
+			 ** TxBufferOut-In is non-zero. If so, then we copy a packet
+			 ** to the output place, and set it going. If this empties
+			 ** the buffer, then we must issue a wakeup( ) on OUT.
+			 ** If it frees space in the buffer then we must issue
+			 ** a wakeup( ) on IN.
+			 **
+			 ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we
+			 ** have to send a WFLUSH command down the PHB, to mark the
+			 ** end point of a WFLUSH. We also need to clear out any
+			 ** data from the double buffer! ( note that WflushFlag is a
+			 ** *count* of the number of WFLUSH commands outstanding! )
+			 **
+			 ** ++++ And there's more!
+			 ** If an RTA is powered off, then on again, and rebooted,
+			 ** whilst it has ports open, then we need to re-open the ports.
+			 ** ( reasonable enough ). We can't do this when we spot the
+			 ** re-boot, in interrupt time, because the queue is probably
+			 ** full. So, when we come in here, we need to test if any
+			 ** ports are in this condition, and re-open the port before
+			 ** we try to send any more data to it. Now, the re-booted
+			 ** RTA will be discarding packets from the PHB until it
+			 ** receives this open packet, but don't worry tooo much
+			 ** about that. The one thing that is interesting is the
+			 ** combination of this effect and the WFLUSH effect!
+			 */
+			/* For now don't handle RTA reboots. -- REW.
+			   Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */
+			if (PortP->MagicFlags) {
+#if 1
+				if (PortP->MagicFlags & MAGIC_REBOOT) {
+					/*
+					 ** well, the RTA has been rebooted, and there is room
+					 ** on its queue to add the open packet that is required.
+					 **
+					 ** The messy part of this line is trying to decide if
+					 ** we need to call the Param function as a tty or as
+					 ** a modem.
+					 ** DONT USE CLOCAL AS A TEST FOR THIS!
+					 **
+					 ** If we can't param the port, then move on to the
+					 ** next port.
+					 */
+					PortP->InUse = NOT_INUSE;
+
+					rio_spin_unlock(&PortP->portSem);
+					if (RIOParam(PortP, OPEN, ((PortP->Cor2Copy & (COR2_RTSFLOW | COR2_CTSFLOW)) == (COR2_RTSFLOW | COR2_CTSFLOW)) ? TRUE : FALSE, DONT_SLEEP) == RIO_FAIL) {
+						continue;	/* with next port */
+					}
+					rio_spin_lock(&PortP->portSem);
+					PortP->MagicFlags &= ~MAGIC_REBOOT;
+				}
 #endif
 
-	/*
-	** As mentioned above, this is a tacky hack to cope
-	** with WFLUSH
-	*/
-	if ( PortP->WflushFlag ) {
-	  rio_dprintk (RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n");
-
-	  if ( PortP->InUse )
-	    rio_dprintk (RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n");
-	}
-				
-	while ( PortP->WflushFlag &&
-		can_add_transmit( &PacketP, PortP ) && 
-		( PortP->InUse == NOT_INUSE ) ) {
-	  int p;
-	  struct PktCmd *PktCmdP;
-
-	  rio_dprintk (RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n");
-	  /*
-	  ** make it look just like a WFLUSH command
-	  */
-	  PktCmdP = ( struct PktCmd * )&PacketP->data[0];
-
-	  WBYTE( PktCmdP->Command , WFLUSH );
-
-	  p =  PortP->HostPort % ( ushort )PORTS_PER_RTA;
-
-	  /*
-	  ** If second block of ports for 16 port RTA, add 8
-	  ** to index 8-15.
-	  */
-	  if ( PortP->SecondBlock )
-	    p += PORTS_PER_RTA;
-
-	  WBYTE( PktCmdP->PhbNum, p );
-
-	  /*
-	  ** to make debuggery easier
-	  */
-	  WBYTE( PacketP->data[ 2], 'W'  );
-	  WBYTE( PacketP->data[ 3], 'F'  );
-	  WBYTE( PacketP->data[ 4], 'L'  );
-	  WBYTE( PacketP->data[ 5], 'U'  );
-	  WBYTE( PacketP->data[ 6], 'S'  );
-	  WBYTE( PacketP->data[ 7], 'H'  );
-	  WBYTE( PacketP->data[ 8], ' '  );
-	  WBYTE( PacketP->data[ 9], '0'+PortP->WflushFlag );
-	  WBYTE( PacketP->data[10], ' '  );
-	  WBYTE( PacketP->data[11], ' '  );
-	  WBYTE( PacketP->data[12], '\0' );
-
-	  /*
-	  ** its two bytes long!
-	  */
-	  WBYTE( PacketP->len , PKT_CMD_BIT | 2 );
-
-	  /*
-	  ** queue it!
-	  */
-	  if ( !( PortP->State & RIO_DELETED ) ) {
-	    add_transmit( PortP );
-	    /*
-	    ** Count chars tx'd for port statistics reporting
-	    */
-	    if ( PortP->statsGather )
-	      PortP->txchars += 2;
-	  }
-
-	  if ( --( PortP->WflushFlag ) == 0 ) {
-	    PortP->MagicFlags &= ~MAGIC_FLUSH;
-	  }
-
-	  rio_dprintk (RIO_DEBUG_INTR, "Wflush count now stands at %d\n", 
-		 PortP->WflushFlag);
-	}
-	if ( PortP->MagicFlags & MORE_OUTPUT_EYGOR ) {
-	  if ( PortP->MagicFlags & MAGIC_FLUSH ) {
-	    PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
-	  }
-	  else {
-	    if ( !can_add_transmit( &PacketP, PortP ) ) {
-	      rio_spin_unlock(&PortP->portSem);
-	      continue;
-	    }
-	    rio_spin_unlock(&PortP->portSem);
-	    RIOTxEnable((char *)PortP);
-	    rio_spin_lock(&PortP->portSem);
-	    PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
-	  }
+				/*
+				 ** As mentioned above, this is a tacky hack to cope
+				 ** with WFLUSH
+				 */
+				if (PortP->WflushFlag) {
+					rio_dprintk(RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n");
+
+					if (PortP->InUse)
+						rio_dprintk(RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n");
+				}
+
+				while (PortP->WflushFlag && can_add_transmit(&PacketP, PortP) && (PortP->InUse == NOT_INUSE)) {
+					int p;
+					struct PktCmd *PktCmdP;
+
+					rio_dprintk(RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n");
+					/*
+					 ** make it look just like a WFLUSH command
+					 */
+					PktCmdP = (struct PktCmd *) &PacketP->data[0];
+
+					WBYTE(PktCmdP->Command, WFLUSH);
+
+					p = PortP->HostPort % (ushort) PORTS_PER_RTA;
+
+					/*
+					 ** If second block of ports for 16 port RTA, add 8
+					 ** to index 8-15.
+					 */
+					if (PortP->SecondBlock)
+						p += PORTS_PER_RTA;
+
+					WBYTE(PktCmdP->PhbNum, p);
+
+					/*
+					 ** to make debuggery easier
+					 */
+					WBYTE(PacketP->data[2], 'W');
+					WBYTE(PacketP->data[3], 'F');
+					WBYTE(PacketP->data[4], 'L');
+					WBYTE(PacketP->data[5], 'U');
+					WBYTE(PacketP->data[6], 'S');
+					WBYTE(PacketP->data[7], 'H');
+					WBYTE(PacketP->data[8], ' ');
+					WBYTE(PacketP->data[9], '0' + PortP->WflushFlag);
+					WBYTE(PacketP->data[10], ' ');
+					WBYTE(PacketP->data[11], ' ');
+					WBYTE(PacketP->data[12], '\0');
+
+					/*
+					 ** its two bytes long!
+					 */
+					WBYTE(PacketP->len, PKT_CMD_BIT | 2);
+
+					/*
+					 ** queue it!
+					 */
+					if (!(PortP->State & RIO_DELETED)) {
+						add_transmit(PortP);
+						/*
+						 ** Count chars tx'd for port statistics reporting
+						 */
+						if (PortP->statsGather)
+							PortP->txchars += 2;
+					}
+
+					if (--(PortP->WflushFlag) == 0) {
+						PortP->MagicFlags &= ~MAGIC_FLUSH;
+					}
+
+					rio_dprintk(RIO_DEBUG_INTR, "Wflush count now stands at %d\n", PortP->WflushFlag);
+				}
+				if (PortP->MagicFlags & MORE_OUTPUT_EYGOR) {
+					if (PortP->MagicFlags & MAGIC_FLUSH) {
+						PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
+					} else {
+						if (!can_add_transmit(&PacketP, PortP)) {
+							rio_spin_unlock(&PortP->portSem);
+							continue;
+						}
+						rio_spin_unlock(&PortP->portSem);
+						RIOTxEnable((char *) PortP);
+						rio_spin_lock(&PortP->portSem);
+						PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
+					}
+				}
+			}
+
+
+			/*
+			 ** If we can't add anything to the transmit queue, then
+			 ** we need do none of the remaining processing.
+			 */
+			if (!can_add_transmit(&PacketP, PortP)) {
+				rio_spin_unlock(&PortP->portSem);
+				continue;
+			}
+
+			rio_spin_unlock(&PortP->portSem);
+			RIOTxEnable((char *) PortP);
+		}
 	}
-      }
-
-
-      /*
-      ** If we can't add anything to the transmit queue, then
-      ** we need do none of the remaining processing.
-      */
-      if (!can_add_transmit( &PacketP, PortP ) ) {
-	rio_spin_unlock(&PortP->portSem);
-	continue;
-      }
-
-      rio_spin_unlock(&PortP->portSem);
-      RIOTxEnable((char *)PortP);
-    }
-  }
 }
 
 /*
@@ -551,176 +533,162 @@ int From;
 ** NB: Called with the tty locked. The spl from the lockb( ) is passed.
 ** we return the ttySpl level that we re-locked at.
 */
-static void
-RIOReceive(p, PortP)
-struct rio_info *	p;
-struct Port *		PortP;
+static void RIOReceive(p, PortP)
+struct rio_info *p;
+struct Port *PortP;
 {
-  struct tty_struct *TtyP;
-  register ushort transCount;
-  struct PKT *PacketP;
-  register uint	DataCnt;
-  uchar *	ptr;
-  unsigned char *buf;
-  int copied =0;
-
-  static int intCount, RxIntCnt;
-
-  /*
-  ** The receive data process is to remove packets from the
-  ** PHB until there aren't any more or the current cblock
-  ** is full. When this occurs, there will be some left over
-  ** data in the packet, that we must do something with.
-  ** As we haven't unhooked the packet from the read list
-  ** yet, we can just leave the packet there, having first
-  ** made a note of how far we got. This means that we need
-  ** a pointer per port saying where we start taking the
-  ** data from - this will normally be zero, but when we
-  ** run out of space it will be set to the offset of the
-  ** next byte to copy from the packet data area. The packet
-  ** length field is decremented by the number of bytes that
-  ** we succesfully removed from the packet. When this reaches
-  ** zero, we reset the offset pointer to be zero, and free
-  ** the packet from the front of the queue.
-  */
-
-  intCount++;
-
-  TtyP = PortP->gs.tty;
-  if (!TtyP) {
-    rio_dprintk (RIO_DEBUG_INTR, "RIOReceive: tty is null. \n");
-    return;
-  }
-
-  if (PortP->State & RIO_THROTTLE_RX) {
-    rio_dprintk (RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n");
-    return;
-  }
-
-  if ( PortP->State & RIO_DELETED )
-    {
-      while ( can_remove_receive( &PacketP, PortP ) )
-	{
-	  remove_receive( PortP );
-	  put_free_end( PortP->HostP, PacketP );
+	struct tty_struct *TtyP;
+	register ushort transCount;
+	struct PKT *PacketP;
+	register uint DataCnt;
+	uchar *ptr;
+	unsigned char *buf;
+	int copied = 0;
+
+	static int intCount, RxIntCnt;
+
+	/*
+	 ** The receive data process is to remove packets from the
+	 ** PHB until there aren't any more or the current cblock
+	 ** is full. When this occurs, there will be some left over
+	 ** data in the packet, that we must do something with.
+	 ** As we haven't unhooked the packet from the read list
+	 ** yet, we can just leave the packet there, having first
+	 ** made a note of how far we got. This means that we need
+	 ** a pointer per port saying where we start taking the
+	 ** data from - this will normally be zero, but when we
+	 ** run out of space it will be set to the offset of the
+	 ** next byte to copy from the packet data area. The packet
+	 ** length field is decremented by the number of bytes that
+	 ** we succesfully removed from the packet. When this reaches
+	 ** zero, we reset the offset pointer to be zero, and free
+	 ** the packet from the front of the queue.
+	 */
+
+	intCount++;
+
+	TtyP = PortP->gs.tty;
+	if (!TtyP) {
+		rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: tty is null. \n");
+		return;
 	}
-    }
-  else
-    {
-      /*
-      ** loop, just so long as:
-      **   i ) there's some data ( i.e. can_remove_receive )
-      **  ii ) we haven't been blocked
-      ** iii ) there's somewhere to put the data
-      **  iv ) we haven't outstayed our welcome
-      */
-      transCount = 1;
-      while ( can_remove_receive(&PacketP, PortP)
-	      && transCount)
-	{
+
+	if (PortP->State & RIO_THROTTLE_RX) {
+		rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n");
+		return;
+	}
+
+	if (PortP->State & RIO_DELETED) {
+		while (can_remove_receive(&PacketP, PortP)) {
+			remove_receive(PortP);
+			put_free_end(PortP->HostP, PacketP);
+		}
+	} else {
+		/*
+		 ** loop, just so long as:
+		 **   i ) there's some data ( i.e. can_remove_receive )
+		 **  ii ) we haven't been blocked
+		 ** iii ) there's somewhere to put the data
+		 **  iv ) we haven't outstayed our welcome
+		 */
+		transCount = 1;
+		while (can_remove_receive(&PacketP, PortP)
+		       && transCount) {
 #ifdef STATS
-	  PortP->Stat.RxIntCnt++;
-#endif /* STATS */
-	  RxIntCnt++;
-
-	  /*
-	  ** check that it is not a command!
-	  */
-	  if ( PacketP->len & PKT_CMD_BIT ) {
-	    rio_dprintk (RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n");
-	    /*	    rio_dprint(RIO_DEBUG_INTR, (" sysport   = %d\n", p->RIOPortp->PortNum)); */
-	    rio_dprintk (RIO_DEBUG_INTR, " dest_unit = %d\n", PacketP->dest_unit);
-	    rio_dprintk (RIO_DEBUG_INTR, " dest_port = %d\n", PacketP->dest_port);
-	    rio_dprintk (RIO_DEBUG_INTR, " src_unit  = %d\n", PacketP->src_unit);
-	    rio_dprintk (RIO_DEBUG_INTR, " src_port  = %d\n", PacketP->src_port);
-	    rio_dprintk (RIO_DEBUG_INTR, " len	   = %d\n", PacketP->len);
-	    rio_dprintk (RIO_DEBUG_INTR, " control   = %d\n", PacketP->control);
-	    rio_dprintk (RIO_DEBUG_INTR, " csum	   = %d\n", PacketP->csum);
-	    rio_dprintk (RIO_DEBUG_INTR, "	 data bytes: ");
-	    for ( DataCnt=0; DataCnt<PKT_MAX_DATA_LEN; DataCnt++ )
-	      rio_dprintk (RIO_DEBUG_INTR, "%d\n", PacketP->data[DataCnt]);
-	    remove_receive( PortP );
-	    put_free_end( PortP->HostP, PacketP );
-	    continue; /* with next packet */
-	  }
-
-	  /*
-	  ** How many characters can we move 'upstream' ?
-	  **
-	  ** Determine the minimum of the amount of data
-	  ** available and the amount of space in which to
-	  ** put it.
-	  **
-	  ** 1.	Get the packet length by masking 'len'
-	  **	for only the length bits.
-	  ** 2.	Available space is [buffer size] - [space used]
-	  **
-	  ** Transfer count is the minimum of packet length
-	  ** and available space.
-	  */
-			
-	  transCount = tty_buffer_request_room(TtyP, PacketP->len & PKT_LEN_MASK);
-	  rio_dprintk (RIO_DEBUG_REC,  "port %d: Copy %d bytes\n", 
-				      PortP->PortNum, transCount);
-	  /*
-	  ** To use the following 'kkprintfs' for debugging - change the '#undef'
-	  ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the
-	  ** driver).
-	  */
+			PortP->Stat.RxIntCnt++;
+#endif				/* STATS */
+			RxIntCnt++;
+
+			/*
+			 ** check that it is not a command!
+			 */
+			if (PacketP->len & PKT_CMD_BIT) {
+				rio_dprintk(RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n");
+				/*      rio_dprint(RIO_DEBUG_INTR, (" sysport   = %d\n", p->RIOPortp->PortNum)); */
+				rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", PacketP->dest_unit);
+				rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", PacketP->dest_port);
+				rio_dprintk(RIO_DEBUG_INTR, " src_unit  = %d\n", PacketP->src_unit);
+				rio_dprintk(RIO_DEBUG_INTR, " src_port  = %d\n", PacketP->src_port);
+				rio_dprintk(RIO_DEBUG_INTR, " len	   = %d\n", PacketP->len);
+				rio_dprintk(RIO_DEBUG_INTR, " control   = %d\n", PacketP->control);
+				rio_dprintk(RIO_DEBUG_INTR, " csum	   = %d\n", PacketP->csum);
+				rio_dprintk(RIO_DEBUG_INTR, "	 data bytes: ");
+				for (DataCnt = 0; DataCnt < PKT_MAX_DATA_LEN; DataCnt++)
+					rio_dprintk(RIO_DEBUG_INTR, "%d\n", PacketP->data[DataCnt]);
+				remove_receive(PortP);
+				put_free_end(PortP->HostP, PacketP);
+				continue;	/* with next packet */
+			}
+
+			/*
+			 ** How many characters can we move 'upstream' ?
+			 **
+			 ** Determine the minimum of the amount of data
+			 ** available and the amount of space in which to
+			 ** put it.
+			 **
+			 ** 1.        Get the packet length by masking 'len'
+			 **   for only the length bits.
+			 ** 2.        Available space is [buffer size] - [space used]
+			 **
+			 ** Transfer count is the minimum of packet length
+			 ** and available space.
+			 */
+
+			transCount = tty_buffer_request_room(TtyP, PacketP->len & PKT_LEN_MASK);
+			rio_dprintk(RIO_DEBUG_REC, "port %d: Copy %d bytes\n", PortP->PortNum, transCount);
+			/*
+			 ** To use the following 'kkprintfs' for debugging - change the '#undef'
+			 ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the
+			 ** driver).
+			 */
 #undef ___DEBUG_IT___
 #ifdef ___DEBUG_IT___
-	  kkprintf("I:%d R:%d P:%d Q:%d C:%d F:%x ",
-		   intCount,
-		   RxIntCnt,
-		   PortP->PortNum,
-		   TtyP->rxqueue.count,
-		   transCount,
-		   TtyP->flags );
+			kkprintf("I:%d R:%d P:%d Q:%d C:%d F:%x ", intCount, RxIntCnt, PortP->PortNum, TtyP->rxqueue.count, transCount, TtyP->flags);
 #endif
-	  ptr = (uchar *) PacketP->data + PortP->RxDataStart;
+			ptr = (uchar *) PacketP->data + PortP->RxDataStart;
 
-	  tty_prepare_flip_string(TtyP, &buf, transCount);
-	  rio_memcpy_fromio (buf, ptr, transCount);
+			tty_prepare_flip_string(TtyP, &buf, transCount);
+			rio_memcpy_fromio(buf, ptr, transCount);
 #ifdef STATS
-	  /*
-	  ** keep a count for statistical purposes
-	  */
-	  PortP->Stat.RxCharCnt	+= transCount;
+			/*
+			 ** keep a count for statistical purposes
+			 */
+			PortP->Stat.RxCharCnt += transCount;
 #endif
-	  PortP->RxDataStart	+= transCount;
-	  PacketP->len		-= transCount;
-	  copied += transCount;
+			PortP->RxDataStart += transCount;
+			PacketP->len -= transCount;
+			copied += transCount;
 
 
 #ifdef ___DEBUG_IT___
-	  kkprintf("T:%d L:%d\n", DataCnt, PacketP->len );
+			kkprintf("T:%d L:%d\n", DataCnt, PacketP->len);
 #endif
 
-	  if ( PacketP->len == 0 )
-	    {
+			if (PacketP->len == 0) {
 				/*
-				** If we have emptied the packet, then we can
-				** free it, and reset the start pointer for
-				** the next packet.
-				*/
-	      remove_receive( PortP );
-	      put_free_end( PortP->HostP, PacketP );
-	      PortP->RxDataStart = 0;
+				 ** If we have emptied the packet, then we can
+				 ** free it, and reset the start pointer for
+				 ** the next packet.
+				 */
+				remove_receive(PortP);
+				put_free_end(PortP->HostP, PacketP);
+				PortP->RxDataStart = 0;
 #ifdef STATS
 				/*
-				** more lies ( oops, I mean statistics )
-				*/
-	      PortP->Stat.RxPktCnt++;
-#endif /* STATS */
-	    }
+				 ** more lies ( oops, I mean statistics )
+				 */
+				PortP->Stat.RxPktCnt++;
+#endif				/* STATS */
+			}
+		}
+	}
+	if (copied) {
+		rio_dprintk(RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied);
+		tty_flip_buffer_push(TtyP);
 	}
-    }
-  if (copied) {
-    rio_dprintk (RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied);
-    tty_flip_buffer_push (TtyP);
-  }
 
-  return;
+	return;
 }
 
 #ifdef FUTURE_RELEASE
@@ -728,221 +696,210 @@ struct Port *		PortP;
 ** The proc routine called by the line discipline to do the work for it.
 ** The proc routine works hand in hand with the interrupt routine.
 */
-int
-riotproc(p, tp, cmd, port)
-struct rio_info *	p;
+int riotproc(p, tp, cmd, port)
+struct rio_info *p;
 register struct ttystatics *tp;
 int cmd;
-int	port;
+int port;
 {
 	register struct Port *PortP;
 	int SysPort;
 	struct PKT *PacketP;
 
-	SysPort = port;	/* Believe me, it works. */
+	SysPort = port;		/* Believe me, it works. */
 
-	if ( SysPort < 0 || SysPort >= RIO_PORTS ) {
-		rio_dprintk (RIO_DEBUG_INTR, "Illegal port %d derived from TTY in riotproc()\n",SysPort);
+	if (SysPort < 0 || SysPort >= RIO_PORTS) {
+		rio_dprintk(RIO_DEBUG_INTR, "Illegal port %d derived from TTY in riotproc()\n", SysPort);
 		return 0;
 	}
 	PortP = p->RIOPortp[SysPort];
 
-	if ((uint)PortP->PhbP < (uint)PortP->Caddr || 
-			(uint)PortP->PhbP >= (uint)PortP->Caddr+SIXTY_FOUR_K ) {
-		rio_dprintk (RIO_DEBUG_INTR, "RIO: NULL or BAD PhbP on sys port %d in proc routine\n",
-							SysPort);
-		rio_dprintk (RIO_DEBUG_INTR, "	 PortP = 0x%x\n",PortP);
-		rio_dprintk (RIO_DEBUG_INTR, "	 PortP->PhbP = 0x%x\n",PortP->PhbP);
-		rio_dprintk (RIO_DEBUG_INTR, "	 PortP->Caddr = 0x%x\n",PortP->PhbP);
-		rio_dprintk (RIO_DEBUG_INTR, "	 PortP->HostPort = 0x%x\n",PortP->HostPort);
+	if ((uint) PortP->PhbP < (uint) PortP->Caddr || (uint) PortP->PhbP >= (uint) PortP->Caddr + SIXTY_FOUR_K) {
+		rio_dprintk(RIO_DEBUG_INTR, "RIO: NULL or BAD PhbP on sys port %d in proc routine\n", SysPort);
+		rio_dprintk(RIO_DEBUG_INTR, "	 PortP = 0x%x\n", PortP);
+		rio_dprintk(RIO_DEBUG_INTR, "	 PortP->PhbP = 0x%x\n", PortP->PhbP);
+		rio_dprintk(RIO_DEBUG_INTR, "	 PortP->Caddr = 0x%x\n", PortP->PhbP);
+		rio_dprintk(RIO_DEBUG_INTR, "	 PortP->HostPort = 0x%x\n", PortP->HostPort);
 		return 0;
 	}
 
-	switch(cmd) {
-		case T_WFLUSH:
-			rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH\n");
+	switch (cmd) {
+	case T_WFLUSH:
+		rio_dprintk(RIO_DEBUG_INTR, "T_WFLUSH\n");
+		/*
+		 ** Because of the spooky way the RIO works, we don't need
+		 ** to issue a flush command on any of the SET*F commands,
+		 ** as that causes trouble with getty and login, which issue
+		 ** these commands to incur a READ flush, and rely on the fact
+		 ** that the line discipline does a wait for drain for them.
+		 ** As the rio doesn't wait for drain, the write flush would
+		 ** destroy the Password: prompt. This isn't very friendly, so
+		 ** here we only issue a WFLUSH command if we are in the interrupt
+		 ** routine, or we aren't executing a SET*F command.
+		 */
+		if (PortP->HostP->InIntr || !PortP->FlushCmdBodge) {
 			/*
-			** Because of the spooky way the RIO works, we don't need
-			** to issue a flush command on any of the SET*F commands,
-			** as that causes trouble with getty and login, which issue
-			** these commands to incur a READ flush, and rely on the fact
-			** that the line discipline does a wait for drain for them.
-			** As the rio doesn't wait for drain, the write flush would
-			** destroy the Password: prompt. This isn't very friendly, so
-			** here we only issue a WFLUSH command if we are in the interrupt
-			** routine, or we aren't executing a SET*F command.
-			*/
-			if ( PortP->HostP->InIntr || !PortP->FlushCmdBodge ) {
-				/*
-				** form a wflush packet - 1 byte long, no data
-				*/
-				if ( PortP->State & RIO_DELETED ) {
-					rio_dprintk (RIO_DEBUG_INTR, "WFLUSH on deleted RTA\n");
-				}
-				else {
-					if ( RIOPreemptiveCmd(p, PortP, WFLUSH ) == RIO_FAIL ) {
-						rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command failed\n");
-					}
-					else
-						rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command\n");
-				}
-				/*
-				** WFLUSH operation - flush the data!
-				*/
-				PortP->TxBufferIn = PortP->TxBufferOut = 0;
-			}
-			else {
-				rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command ignored\n");
+			 ** form a wflush packet - 1 byte long, no data
+			 */
+			if (PortP->State & RIO_DELETED) {
+				rio_dprintk(RIO_DEBUG_INTR, "WFLUSH on deleted RTA\n");
+			} else {
+				if (RIOPreemptiveCmd(p, PortP, WFLUSH) == RIO_FAIL) {
+					rio_dprintk(RIO_DEBUG_INTR, "T_WFLUSH Command failed\n");
+				} else
+					rio_dprintk(RIO_DEBUG_INTR, "T_WFLUSH Command\n");
 			}
 			/*
-			** sort out the line discipline
-			*/
-			if (PortP->CookMode == COOK_WELL)
-				goto start;
-			break;
-	
-		case T_RESUME:
-			rio_dprintk (RIO_DEBUG_INTR, "T_RESUME\n");
-			/*
-			** send pre-emptive resume packet
-			*/
-			if ( PortP->State & RIO_DELETED ) {
-				rio_dprintk (RIO_DEBUG_INTR, "RESUME on deleted RTA\n");
+			 ** WFLUSH operation - flush the data!
+			 */
+			PortP->TxBufferIn = PortP->TxBufferOut = 0;
+		} else {
+			rio_dprintk(RIO_DEBUG_INTR, "T_WFLUSH Command ignored\n");
+		}
+		/*
+		 ** sort out the line discipline
+		 */
+		if (PortP->CookMode == COOK_WELL)
+			goto start;
+		break;
+
+	case T_RESUME:
+		rio_dprintk(RIO_DEBUG_INTR, "T_RESUME\n");
+		/*
+		 ** send pre-emptive resume packet
+		 */
+		if (PortP->State & RIO_DELETED) {
+			rio_dprintk(RIO_DEBUG_INTR, "RESUME on deleted RTA\n");
+		} else {
+			if (RIOPreemptiveCmd(p, PortP, RESUME) == RIO_FAIL) {
+				rio_dprintk(RIO_DEBUG_INTR, "T_RESUME Command failed\n");
 			}
-			else {
-				if ( RIOPreemptiveCmd(p, PortP, RESUME ) == RIO_FAIL ) {
-					rio_dprintk (RIO_DEBUG_INTR, "T_RESUME Command failed\n");
-				}
+		}
+		/*
+		 ** and re-start the sender software!
+		 */
+		if (PortP->CookMode == COOK_WELL)
+			goto start;
+		break;
+
+	case T_TIME:
+		rio_dprintk(RIO_DEBUG_INTR, "T_TIME\n");
+		/*
+		 ** T_TIME is called when xDLY is set in oflags and
+		 ** the line discipline timeout has expired. It's
+		 ** function in life is to clear the TIMEOUT flag
+		 ** and to re-start output to the port.
+		 */
+		/*
+		 ** Fall through and re-start output
+		 */
+	case T_OUTPUT:
+	      start:
+		if (PortP->MagicFlags & MAGIC_FLUSH) {
+			PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
+			return 0;
+		}
+		RIOTxEnable((char *) PortP);
+		PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
+		/*rio_dprint(RIO_DEBUG_INTR, PortP,DBG_PROC,"T_OUTPUT finished\n"); */
+		break;
+
+	case T_SUSPEND:
+		rio_dprintk(RIO_DEBUG_INTR, "T_SUSPEND\n");
+		/*
+		 ** send a suspend pre-emptive packet.
+		 */
+		if (PortP->State & RIO_DELETED) {
+			rio_dprintk(RIO_DEBUG_INTR, "SUSPEND deleted RTA\n");
+		} else {
+			if (RIOPreemptiveCmd(p, PortP, SUSPEND) == RIO_FAIL) {
+				rio_dprintk(RIO_DEBUG_INTR, "T_SUSPEND Command failed\n");
 			}
-			/*
-			** and re-start the sender software!
-			*/
-			if (PortP->CookMode == COOK_WELL)
-				goto start;
-			break;
-	
-		case T_TIME:
-			rio_dprintk (RIO_DEBUG_INTR, "T_TIME\n");
-			/*
-			** T_TIME is called when xDLY is set in oflags and
-			** the line discipline timeout has expired. It's
-			** function in life is to clear the TIMEOUT flag
-			** and to re-start output to the port.
-			*/
-			/*
-			** Fall through and re-start output
-			*/
-		case T_OUTPUT:
-start:
-			if ( PortP->MagicFlags & MAGIC_FLUSH ) {
-				PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
+		}
+		/*
+		 ** done!
+		 */
+		break;
+
+	case T_BLOCK:
+		rio_dprintk(RIO_DEBUG_INTR, "T_BLOCK\n");
+		break;
+
+	case T_RFLUSH:
+		rio_dprintk(RIO_DEBUG_INTR, "T_RFLUSH\n");
+		if (PortP->State & RIO_DELETED) {
+			rio_dprintk(RIO_DEBUG_INTR, "RFLUSH on deleted RTA\n");
+			PortP->RxDataStart = 0;
+		} else {
+			if (RIOPreemptiveCmd(p, PortP, RFLUSH) == RIO_FAIL) {
+				rio_dprintk(RIO_DEBUG_INTR, "T_RFLUSH Command failed\n");
 				return 0;
 			}
-			RIOTxEnable((char *)PortP);
-			PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
-			/*rio_dprint(RIO_DEBUG_INTR, PortP,DBG_PROC,"T_OUTPUT finished\n");*/
-			break;
-	
-		case T_SUSPEND:
-			rio_dprintk (RIO_DEBUG_INTR, "T_SUSPEND\n");
-			/*
-			** send a suspend pre-emptive packet.
-			*/
-			if ( PortP->State & RIO_DELETED ) {
-				rio_dprintk (RIO_DEBUG_INTR, "SUSPEND deleted RTA\n");
-			}
-			else {
-				if ( RIOPreemptiveCmd(p, PortP, SUSPEND ) == RIO_FAIL ) {
-					rio_dprintk (RIO_DEBUG_INTR, "T_SUSPEND Command failed\n");
-				}
+			PortP->RxDataStart = 0;
+			while (can_remove_receive(&PacketP, PortP)) {
+				remove_receive(PortP);
+				ShowPacket(DBG_PROC, PacketP);
+				put_free_end(PortP->HostP, PacketP);
 			}
-			/*
-			** done!
-			*/
-			break;
-	
-		case T_BLOCK:
-			rio_dprintk (RIO_DEBUG_INTR, "T_BLOCK\n");
-			break;
-	
-		case T_RFLUSH:
-			rio_dprintk (RIO_DEBUG_INTR, "T_RFLUSH\n");
-			if ( PortP->State & RIO_DELETED ) {
-				rio_dprintk (RIO_DEBUG_INTR, "RFLUSH on deleted RTA\n");
-				PortP->RxDataStart = 0;
-			}
-			else {
-				if ( RIOPreemptiveCmd( p, PortP, RFLUSH ) == RIO_FAIL ) {
-					rio_dprintk (RIO_DEBUG_INTR, "T_RFLUSH Command failed\n");
-					return 0;
-				}
-				PortP->RxDataStart = 0;
-				while ( can_remove_receive(&PacketP, PortP) ) {
-					remove_receive(PortP);
-					ShowPacket(DBG_PROC, PacketP );
-					put_free_end(PortP->HostP, PacketP );
-				}
-				if ( PortP->PhbP->handshake == PHB_HANDSHAKE_SET ) {
-					/*
-					** MAGIC!
-					*/
-					rio_dprintk (RIO_DEBUG_INTR, "Set receive handshake bit\n");
-					PortP->PhbP->handshake |= PHB_HANDSHAKE_RESET;
-				}
-			}
-			break;
-			/* FALLTHROUGH */
-		case T_UNBLOCK:
-			rio_dprintk (RIO_DEBUG_INTR, "T_UNBLOCK\n");
-			/*
-			** If there is any data to receive set a timeout to service it.
-			*/
-			RIOReceive(p, PortP);
-			break;
-	
-		case T_BREAK:
-			rio_dprintk (RIO_DEBUG_INTR, "T_BREAK\n");
-			/*
-			** Send a break command. For Sys V
-			** this is a timed break, so we
-			** send a SBREAK[time] packet
-			*/
-			/*
-			** Build a BREAK command
-			*/
-			if ( PortP->State & RIO_DELETED ) {
-				rio_dprintk (RIO_DEBUG_INTR, "BREAK on deleted RTA\n");
+			if (PortP->PhbP->handshake == PHB_HANDSHAKE_SET) {
+				/*
+				 ** MAGIC!
+				 */
+				rio_dprintk(RIO_DEBUG_INTR, "Set receive handshake bit\n");
+				PortP->PhbP->handshake |= PHB_HANDSHAKE_RESET;
 			}
-			else {
-				if (RIOShortCommand(PortP,SBREAK,2,
-								p->RIOConf.BreakInterval)==RIO_FAIL) {
-			   		rio_dprintk (RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n");
-				}
+		}
+		break;
+		/* FALLTHROUGH */
+	case T_UNBLOCK:
+		rio_dprintk(RIO_DEBUG_INTR, "T_UNBLOCK\n");
+		/*
+		 ** If there is any data to receive set a timeout to service it.
+		 */
+		RIOReceive(p, PortP);
+		break;
+
+	case T_BREAK:
+		rio_dprintk(RIO_DEBUG_INTR, "T_BREAK\n");
+		/*
+		 ** Send a break command. For Sys V
+		 ** this is a timed break, so we
+		 ** send a SBREAK[time] packet
+		 */
+		/*
+		 ** Build a BREAK command
+		 */
+		if (PortP->State & RIO_DELETED) {
+			rio_dprintk(RIO_DEBUG_INTR, "BREAK on deleted RTA\n");
+		} else {
+			if (RIOShortCommand(PortP, SBREAK, 2, p->RIOConf.BreakInterval) == RIO_FAIL) {
+				rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n");
 			}
-	
-			/*
-			** done!
-			*/
-			break;
-	
-		case T_INPUT:
-			rio_dprintk (RIO_DEBUG_INTR, "Proc T_INPUT called - I don't know what to do!\n");
-			break;
-		case T_PARM:
-			rio_dprintk (RIO_DEBUG_INTR, "Proc T_PARM called - I don't know what to do!\n");
-			break;
-	
-		case T_SWTCH:
-			rio_dprintk (RIO_DEBUG_INTR, "Proc T_SWTCH called - I don't know what to do!\n");
-			break;
-	
-		default:
-			rio_dprintk (RIO_DEBUG_INTR, "Proc UNKNOWN command %d\n",cmd);
+		}
+
+		/*
+		 ** done!
+		 */
+		break;
+
+	case T_INPUT:
+		rio_dprintk(RIO_DEBUG_INTR, "Proc T_INPUT called - I don't know what to do!\n");
+		break;
+	case T_PARM:
+		rio_dprintk(RIO_DEBUG_INTR, "Proc T_PARM called - I don't know what to do!\n");
+		break;
+
+	case T_SWTCH:
+		rio_dprintk(RIO_DEBUG_INTR, "Proc T_SWTCH called - I don't know what to do!\n");
+		break;
+
+	default:
+		rio_dprintk(RIO_DEBUG_INTR, "Proc UNKNOWN command %d\n", cmd);
 	}
 	/*
-	** T_OUTPUT returns without passing through this point!
-	*/
-	/*rio_dprint(RIO_DEBUG_INTR, PortP,DBG_PROC,"riotproc done\n");*/
-	return(0);
+	 ** T_OUTPUT returns without passing through this point!
+	 */
+	/*rio_dprint(RIO_DEBUG_INTR, PortP,DBG_PROC,"riotproc done\n"); */
+	return (0);
 }
 #endif