Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 227 insertions, 0 deletions

diff --git a/drivers/char/ftape/zftape/zftape-vtbl.h b/drivers/char/ftape/zftape/zftape-vtbl.h
new file mode 100644
index 00000000000..f31d196d175
--- /dev/null
+++ b/drivers/char/ftape/zftape/zftape-vtbl.h
@@ -0,0 +1,227 @@
+#ifndef _ZFTAPE_VTBL_H
+#define _ZFTAPE_VTBL_H
+
+/*
+ *      Copyright (c) 1995-1997  Claus-Justus Heine
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License as
+ published by the Free Software Foundation; either version 2, or (at
+ your option) any later version.
+ 
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ General Public License for more details.
+ 
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.  If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-vtbl.h,v $
+ * $Revision: 1.3 $
+ * $Date: 1997/10/28 14:30:09 $
+ *
+ *      This file defines a volume table as defined in the QIC-80
+ *      development standards.
+ */
+
+#include <linux/list.h>
+
+#include "../lowlevel/ftape-tracing.h"
+
+#include "../zftape/zftape-eof.h"
+#include "../zftape/zftape-ctl.h"
+#include "../zftape/zftape-rw.h"
+
+#define VTBL_SIZE 128 /* bytes */
+
+/* The following are offsets in the vtbl.  */
+#define VTBL_SIG   0
+#define VTBL_START 4
+#define VTBL_END   6
+#define VTBL_DESC  8
+#define VTBL_DATE  52
+#define VTBL_FLAGS 56
+#define VTBL_FL_VENDOR_SPECIFIC (1<<0)
+#define VTBL_FL_MUTLI_CARTRIDGE (1<<1)
+#define VTBL_FL_NOT_VERIFIED    (1<<2)
+#define VTBL_FL_REDIR_INHIBIT   (1<<3)
+#define VTBL_FL_SEG_SPANNING    (1<<4)
+#define VTBL_FL_DIRECTORY_LAST  (1<<5)
+#define VTBL_FL_RESERVED_6      (1<<6)
+#define VTBL_FL_RESERVED_7      (1<<7)
+#define VTBL_M_NO  57
+#define VTBL_EXT   58
+#define EXT_ZFTAPE_SIG     0
+#define EXT_ZFTAPE_BLKSZ  10
+#define EXT_ZFTAPE_CMAP   12
+#define EXT_ZFTAPE_QIC113 13
+#define VTBL_PWD   84
+#define VTBL_DIR_SIZE 92
+#define VTBL_DATA_SIZE 96
+#define VTBL_OS_VERSION 104
+#define VTBL_SRC_DRIVE  106
+#define VTBL_DEV        122
+#define VTBL_RESERVED_1 123
+#define VTBL_CMPR       124
+#define VTBL_CMPR_UNREG 0x3f
+#define VTBL_CMPR_USED  0x80
+#define VTBL_FMT        125
+#define VTBL_RESERVED_2 126
+#define VTBL_RESERVED_3 127
+/* compatibility with pre revision K */
+#define VTBL_K_CMPR     120 
+
+/*  the next is used by QIC-3020 tapes with format code 6 (>2^16
+ *  segments) It is specified in QIC-113, Rev. G, Section 5 (SCSI
+ *  volume table). The difference is simply, that we only store the
+ *  number of segments used, not the starting segment.
+ */
+#define VTBL_SCSI_SEGS  4 /* is a 4 byte value */
+
+/*  one vtbl is 128 bytes, that results in a maximum number of
+ *  29*1024/128 = 232 volumes.
+ */
+#define ZFT_MAX_VOLUMES (FT_SEGMENT_SIZE/VTBL_SIZE)
+#define VTBL_ID  "VTBL"
+#define VTBL_IDS { VTBL_ID, "XTBL", "UTID", "EXVT" } /* other valid ids */
+#define ZFT_VOL_NAME "zftape volume" /* volume label used by me */
+#define ZFTAPE_SIG "LINUX ZFT"
+
+/*  global variables
+ */
+typedef struct zft_internal_vtbl
+{
+	struct list_head node;
+	int          count;
+	unsigned int start_seg;         /* 32 bits are enough for now */
+	unsigned int end_seg;           /* 32 bits are enough for now */
+	__s64        size;              /* uncompressed size */
+        unsigned int blk_sz;            /* block size for this volume */
+	unsigned int zft_volume     :1; /* zftape created this volume */
+	unsigned int use_compression:1; /* compressed volume  */
+	unsigned int qic113         :1; /* layout of compressed block
+					 * info and vtbl conforms to
+					 * QIC-113, Rev. G 
+					 */
+	unsigned int new_volume     :1; /* it was created by us, this
+					 * run.  this allows the
+					 * fields that aren't really
+					 * used by zftape to be filled
+					 * in by some user level
+					 * program.
+					 */
+	unsigned int open           :1; /* just in progress of being 
+					 * written
+					 */
+} zft_volinfo;
+
+extern struct list_head zft_vtbl;
+#define zft_head_vtbl  list_entry(zft_vtbl.next, zft_volinfo, node)
+#define zft_eom_vtbl   list_entry(zft_vtbl.prev, zft_volinfo, node)
+#define zft_last_vtbl  list_entry(zft_eom_vtbl->node.prev, zft_volinfo, node)
+#define zft_first_vtbl list_entry(zft_head_vtbl->node.next, zft_volinfo, node)
+#define zft_vtbl_empty (zft_eom_vtbl->node.prev == &zft_head_vtbl->node)
+
+#define DUMP_VOLINFO(level, desc, info)					\
+{									\
+	char tmp[21];							\
+	strlcpy(tmp, desc, sizeof(tmp));				\
+	TRACE(level, "Volume %d:\n"					\
+	      KERN_INFO "description  : %s\n"				\
+	      KERN_INFO "first segment: %d\n"				\
+	      KERN_INFO "last  segment: %d\n"				\
+	      KERN_INFO "size         : " LL_X "\n"			\
+	      KERN_INFO "block size   : %d\n"				\
+	      KERN_INFO "compression  : %d\n"				\
+	      KERN_INFO "zftape volume: %d\n"				\
+	      KERN_INFO "QIC-113 conf.: %d",				\
+	      (info)->count, tmp, (info)->start_seg, (info)->end_seg,	\
+	      LL((info)->size), (info)->blk_sz,				\
+	      (info)->use_compression != 0, (info)->zft_volume != 0,	\
+	      (info)->qic113 != 0);					\
+}
+
+extern int zft_qic_mode;
+extern int zft_old_ftape;
+extern int zft_volume_table_changed;
+
+/* exported functions */
+extern void  zft_init_vtbl             (void);
+extern void  zft_free_vtbl             (void);
+extern int   zft_extract_volume_headers(__u8 *buffer);
+extern int   zft_update_volume_table   (unsigned int segment);
+extern int   zft_open_volume           (zft_position *pos,
+					int blk_sz, int use_compression);
+extern int   zft_close_volume          (zft_position *pos);
+extern const zft_volinfo *zft_find_volume(unsigned int seg_pos);
+extern int   zft_skip_volumes          (int count, zft_position *pos);
+extern __s64 zft_get_eom_pos           (void);
+extern void  zft_skip_to_eom           (zft_position *pos);
+extern int   zft_fake_volume_headers   (eof_mark_union *eof_map, 
+					int num_failed_sectors);
+extern int   zft_weof                  (unsigned int count, zft_position *pos);
+extern void  zft_move_past_eof         (zft_position *pos);
+
+static inline int   zft_tape_at_eod         (const zft_position *pos);
+static inline int   zft_tape_at_lbot        (const zft_position *pos);
+static inline void  zft_position_before_eof (zft_position *pos, 
+					     const zft_volinfo *volume);
+static inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
+				      const zft_position *pos);
+
+/* this function decrements the zft_seg_pos counter if we are right
+ * at the beginning of a segment. This is to handle fsfm/bsfm -- we
+ * need to position before the eof mark.  NOTE: zft_tape_pos is not
+ * changed 
+ */
+static inline void zft_position_before_eof(zft_position *pos, 
+					   const zft_volinfo *volume)
+{ 
+	TRACE_FUN(ft_t_flow);
+
+	if (pos->seg_pos == volume->end_seg + 1 &&  pos->seg_byte_pos == 0) {
+		pos->seg_pos --;
+		pos->seg_byte_pos = zft_get_seg_sz(pos->seg_pos);
+	}
+	TRACE_EXIT;
+}
+
+/*  Mmmh. Is the position at the end of the last volume, that is right
+ *  before the last EOF mark also logical an EOD condition?
+ */
+static inline int zft_tape_at_eod(const zft_position *pos)
+{ 
+	TRACE_FUN(ft_t_any);
+
+	if (zft_qic_mode) {
+		TRACE_EXIT (pos->seg_pos >= zft_eom_vtbl->start_seg ||
+			    zft_last_vtbl->open);
+	} else {
+		TRACE_EXIT pos->seg_pos > ft_last_data_segment;
+	}
+}
+
+static inline int zft_tape_at_lbot(const zft_position *pos)
+{
+	if (zft_qic_mode) {
+		return (pos->seg_pos <= zft_first_vtbl->start_seg &&
+			pos->volume_pos == 0);
+	} else {
+		return (pos->seg_pos <= ft_first_data_segment && 
+			pos->volume_pos == 0);
+	}
+}
+
+/* This one checks for EOF.  return remaing space (may be negative) 
+ */
+static inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
+				      const zft_position *pos)
+{     
+	return (__s64)(vtbl->size - pos->volume_pos);
+}
+
+#endif /* _ZFTAPE_VTBL_H */