Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

86 files changed, 47878 insertions, 0 deletions

diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig
new file mode 100644
index 00000000000..d9a02993467
--- /dev/null
+++ b/drivers/char/drm/Kconfig
@@ -0,0 +1,98 @@
+#
+# Drm device configuration
+#
+# This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+#
+config DRM
+	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
+	depends on AGP || AGP=n
+	help
+	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
+	  introduced in XFree86 4.0. If you say Y here, you need to select
+	  the module that's right for your graphics card from the list below.
+	  These modules provide support for synchronization, security, and
+	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
+	  details.  You should also select and configure AGP
+	  (/dev/agpgart) support.
+
+config DRM_TDFX
+	tristate "3dfx Banshee/Voodoo3+"
+	depends on DRM && PCI
+	help
+	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
+	  graphics card.  If M is selected, the module will be called tdfx.
+
+config DRM_GAMMA
+	tristate "3dlabs GMX 2000"
+	depends on DRM && BROKEN
+	help
+	  This is the old gamma driver, please tell me if it might actually
+	  work.
+
+config DRM_R128
+	tristate "ATI Rage 128"
+	depends on DRM && PCI
+	help
+	  Choose this option if you have an ATI Rage 128 graphics card.  If M
+	  is selected, the module will be called r128.  AGP support for
+	  this card is strongly suggested (unless you have a PCI version).
+
+config DRM_RADEON
+	tristate "ATI Radeon"
+	depends on DRM && PCI
+	help
+	  Choose this option if you have an ATI Radeon graphics card.  There
+	  are both PCI and AGP versions.  You don't need to choose this to
+	  run the Radeon in plain VGA mode.  There is a product page at
+	  <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
+	  If M is selected, the module will be called radeon.
+
+config DRM_I810
+	tristate "Intel I810"
+	depends on DRM && AGP && AGP_INTEL
+	help
+	  Choose this option if you have an Intel I810 graphics card.  If M is
+	  selected, the module will be called i810.  AGP support is required
+	  for this driver to work.
+
+choice
+	prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
+	depends on DRM && AGP && AGP_INTEL
+	optional
+
+config DRM_I830
+	tristate "i830 driver"
+	help
+	  Choose this option if you have a system that has Intel 830M, 845G,
+	  852GM, 855GM or 865G integrated graphics.  If M is selected, the
+	  module will be called i830.  AGP support is required for this driver
+	  to work. This driver will eventually be replaced by the i915 one.
+
+config DRM_I915
+	tristate "i915 driver"
+	help
+	  Choose this option if you have a system that has Intel 830M, 845G,
+	  852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
+	  module will be called i915.  AGP support is required for this driver
+	  to work. This driver will eventually replace the I830 driver, when
+	  later release of X start to use the new DDX and DRI.
+	
+endchoice
+
+config DRM_MGA
+	tristate "Matrox g200/g400"
+	depends on DRM && AGP
+	help
+	  Choose this option if you have a Matrox G200, G400 or G450 graphics
+	  card.  If M is selected, the module will be called mga.  AGP
+	  support is required for this driver to work.
+
+config DRM_SIS
+	tristate "SiS video cards"
+	depends on DRM && AGP
+	help
+	  Choose this option if you have a SiS 630 or compatible video 
+          chipset. If M is selected the module will be called sis. AGP
+          support is required for this driver to work.
+
diff --git a/drivers/char/drm/Makefile b/drivers/char/drm/Makefile
new file mode 100644
index 00000000000..23ab26321e9
--- /dev/null
+++ b/drivers/char/drm/Makefile
@@ -0,0 +1,33 @@
+#
+# Makefile for the drm device driver.  This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+
+drm-objs    :=	drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \
+		drm_drv.o drm_fops.o drm_init.o drm_ioctl.o drm_irq.o \
+		drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
+		drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \
+		drm_sysfs.o
+
+gamma-objs  := gamma_drv.o gamma_dma.o
+tdfx-objs   := tdfx_drv.o
+r128-objs   := r128_drv.o r128_cce.o r128_state.o r128_irq.o
+mga-objs    := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o
+i810-objs   := i810_drv.o i810_dma.o
+i830-objs   := i830_drv.o i830_dma.o i830_irq.o
+i915-objs   := i915_drv.o i915_dma.o i915_irq.o i915_mem.o
+radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o
+ffb-objs    := ffb_drv.o ffb_context.o
+sis-objs    := sis_drv.o sis_ds.o sis_mm.o
+
+obj-$(CONFIG_DRM)	+= drm.o
+obj-$(CONFIG_DRM_GAMMA) += gamma.o
+obj-$(CONFIG_DRM_TDFX)	+= tdfx.o
+obj-$(CONFIG_DRM_R128)	+= r128.o
+obj-$(CONFIG_DRM_RADEON)+= radeon.o
+obj-$(CONFIG_DRM_MGA)	+= mga.o
+obj-$(CONFIG_DRM_I810)	+= i810.o
+obj-$(CONFIG_DRM_I830)	+= i830.o
+obj-$(CONFIG_DRM_I915)  += i915.o
+obj-$(CONFIG_DRM_FFB)   += ffb.o
+obj-$(CONFIG_DRM_SIS)   += sis.o
+
diff --git a/drivers/char/drm/README.drm b/drivers/char/drm/README.drm
new file mode 100644
index 00000000000..6441e01e587
--- /dev/null
+++ b/drivers/char/drm/README.drm
@@ -0,0 +1,46 @@
+************************************************************
+* For the very latest on DRI development, please see:      *
+*     http://dri.sourceforge.net/                          *
+************************************************************
+
+The Direct Rendering Manager (drm) is a device-independent kernel-level
+device driver that provides support for the XFree86 Direct Rendering
+Infrastructure (DRI).
+
+The DRM supports the Direct Rendering Infrastructure (DRI) in four major
+ways:
+
+    1. The DRM provides synchronized access to the graphics hardware via
+       the use of an optimized two-tiered lock.
+
+    2. The DRM enforces the DRI security policy for access to the graphics
+       hardware by only allowing authenticated X11 clients access to
+       restricted regions of memory.
+
+    3. The DRM provides a generic DMA engine, complete with multiple
+       queues and the ability to detect the need for an OpenGL context
+       switch.
+
+    4. The DRM is extensible via the use of small device-specific modules
+       that rely extensively on the API exported by the DRM module.
+
+
+Documentation on the DRI is available from:
+    http://precisioninsight.com/piinsights.html
+
+For specific information about kernel-level support, see:
+
+    The Direct Rendering Manager, Kernel Support for the Direct Rendering
+    Infrastructure
+    http://precisioninsight.com/dr/drm.html
+
+    Hardware Locking for the Direct Rendering Infrastructure
+    http://precisioninsight.com/dr/locking.html
+
+    A Security Analysis of the Direct Rendering Infrastructure
+    http://precisioninsight.com/dr/security.html
+
+************************************************************
+* For the very latest on DRI development, please see:      *
+*     http://dri.sourceforge.net/                          *
+************************************************************
diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c
new file mode 100644
index 00000000000..fdca1876ecd
--- /dev/null
+++ b/drivers/char/drm/ati_pcigart.c
@@ -0,0 +1,208 @@
+/**
+ * \file ati_pcigart.h 
+ * ATI PCI GART support
+ *
+ * \author Gareth Hughes <gareth@valinux.com>
+ */
+
+/*
+ * Created: Wed Dec 13 21:52:19 2000 by gareth@valinux.com
+ *
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+
+#if PAGE_SIZE == 65536
+# define ATI_PCIGART_TABLE_ORDER	0
+# define ATI_PCIGART_TABLE_PAGES	(1 << 0)
+#elif PAGE_SIZE == 16384
+# define ATI_PCIGART_TABLE_ORDER	1
+# define ATI_PCIGART_TABLE_PAGES	(1 << 1)
+#elif PAGE_SIZE == 8192
+# define ATI_PCIGART_TABLE_ORDER 	2
+# define ATI_PCIGART_TABLE_PAGES 	(1 << 2)
+#elif PAGE_SIZE == 4096
+# define ATI_PCIGART_TABLE_ORDER 	3
+# define ATI_PCIGART_TABLE_PAGES 	(1 << 3)
+#else
+# error - PAGE_SIZE not 64K, 16K, 8K or 4K
+#endif
+
+# define ATI_MAX_PCIGART_PAGES		8192	/**< 32 MB aperture, 4K pages */
+# define ATI_PCIGART_PAGE_SIZE		4096	/**< PCI GART page size */
+
+unsigned long drm_ati_alloc_pcigart_table( void )
+{
+	unsigned long address;
+	struct page *page;
+	int i;
+	DRM_DEBUG( "%s\n", __FUNCTION__ );
+
+	address = __get_free_pages( GFP_KERNEL, ATI_PCIGART_TABLE_ORDER );
+	if ( address == 0UL ) {
+		return 0;
+	}
+
+	page = virt_to_page( address );
+
+	for ( i = 0 ; i < ATI_PCIGART_TABLE_PAGES ; i++, page++ ) {
+		get_page(page);
+		SetPageReserved( page );
+	}
+
+	DRM_DEBUG( "%s: returning 0x%08lx\n", __FUNCTION__, address );
+	return address;
+}
+
+static void drm_ati_free_pcigart_table( unsigned long address )
+{
+	struct page *page;
+	int i;
+	DRM_DEBUG( "%s\n", __FUNCTION__ );
+
+	page = virt_to_page( address );
+
+	for ( i = 0 ; i < ATI_PCIGART_TABLE_PAGES ; i++, page++ ) {
+		__put_page(page);
+		ClearPageReserved( page );
+	}
+
+	free_pages( address, ATI_PCIGART_TABLE_ORDER );
+}
+
+int drm_ati_pcigart_cleanup( drm_device_t *dev,
+			      unsigned long addr,
+			      dma_addr_t bus_addr)
+{
+	drm_sg_mem_t *entry = dev->sg;
+	unsigned long pages;
+	int i;
+
+	/* we need to support large memory configurations */
+	if ( !entry ) {
+		DRM_ERROR( "no scatter/gather memory!\n" );
+		return 0;
+	}
+
+	if ( bus_addr ) {
+		pci_unmap_single(dev->pdev, bus_addr,
+				 ATI_PCIGART_TABLE_PAGES * PAGE_SIZE,
+				 PCI_DMA_TODEVICE);
+
+		pages = ( entry->pages <= ATI_MAX_PCIGART_PAGES )
+		        ? entry->pages : ATI_MAX_PCIGART_PAGES;
+
+		for ( i = 0 ; i < pages ; i++ ) {
+			if ( !entry->busaddr[i] ) break;
+			pci_unmap_single(dev->pdev, entry->busaddr[i],
+					 PAGE_SIZE, PCI_DMA_TODEVICE);
+		}
+	}
+
+	if ( addr ) {
+		drm_ati_free_pcigart_table( addr );
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(drm_ati_pcigart_cleanup);
+
+int drm_ati_pcigart_init( drm_device_t *dev,
+			   unsigned long *addr,
+			   dma_addr_t *bus_addr)
+{
+	drm_sg_mem_t *entry = dev->sg;
+	unsigned long address = 0;
+	unsigned long pages;
+	u32 *pci_gart, page_base, bus_address = 0;
+	int i, j, ret = 0;
+
+	if ( !entry ) {
+		DRM_ERROR( "no scatter/gather memory!\n" );
+		goto done;
+	}
+
+	address = drm_ati_alloc_pcigart_table();
+	if ( !address ) {
+		DRM_ERROR( "cannot allocate PCI GART page!\n" );
+		goto done;
+	}
+
+	if ( !dev->pdev ) {
+		DRM_ERROR( "PCI device unknown!\n" );
+		goto done;
+	}
+
+	bus_address = pci_map_single(dev->pdev, (void *)address,
+				  ATI_PCIGART_TABLE_PAGES * PAGE_SIZE,
+				  PCI_DMA_TODEVICE);
+	if (bus_address == 0) {
+		DRM_ERROR( "unable to map PCIGART pages!\n" );
+		drm_ati_free_pcigart_table( address );
+		address = 0;
+		goto done;
+	}
+
+	pci_gart = (u32 *)address;
+
+	pages = ( entry->pages <= ATI_MAX_PCIGART_PAGES )
+		? entry->pages : ATI_MAX_PCIGART_PAGES;
+
+	memset( pci_gart, 0, ATI_MAX_PCIGART_PAGES * sizeof(u32) );
+
+	for ( i = 0 ; i < pages ; i++ ) {
+		/* we need to support large memory configurations */
+		entry->busaddr[i] = pci_map_single(dev->pdev,
+					   page_address( entry->pagelist[i] ),
+					   PAGE_SIZE,
+					   PCI_DMA_TODEVICE);
+		if (entry->busaddr[i] == 0) {
+			DRM_ERROR( "unable to map PCIGART pages!\n" );
+			drm_ati_pcigart_cleanup( dev, address, bus_address );
+			address = 0;
+			bus_address = 0;
+			goto done;
+		}
+		page_base = (u32) entry->busaddr[i];
+
+		for (j = 0; j < (PAGE_SIZE / ATI_PCIGART_PAGE_SIZE); j++) {
+			*pci_gart++ = cpu_to_le32( page_base );
+			page_base += ATI_PCIGART_PAGE_SIZE;
+		}
+	}
+
+	ret = 1;
+
+#if defined(__i386__) || defined(__x86_64__)
+	wbinvd();
+#else
+	mb();
+#endif
+
+done:
+	*addr = address;
+	*bus_addr = bus_address;
+	return ret;
+}
+EXPORT_SYMBOL(drm_ati_pcigart_init);
diff --git a/drivers/char/drm/drm.h b/drivers/cha