Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1222 insertions, 0 deletions

diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
new file mode 100644
index 00000000000..c321a924e38
--- /dev/null
+++ b/drivers/char/agp/generic.c
@@ -0,0 +1,1222 @@
+/*
+ * AGPGART driver.
+ * Copyright (C) 2004 Silicon Graphics, Inc.
+ * Copyright (C) 2002-2005 Dave Jones.
+ * Copyright (C) 1999 Jeff Hartmann.
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * TODO:
+ * - Allocate more than order 0 pages to avoid too much linear map splitting.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/pagemap.h>
+#include <linux/miscdevice.h>
+#include <linux/pm.h>
+#include <linux/agp_backend.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+#include <asm/pgtable.h>
+#include "agp.h"
+
+__u32 *agp_gatt_table;
+int agp_memory_reserved;
+
+/*
+ * Needed by the Nforce GART driver for the time being. Would be
+ * nice to do this some other way instead of needing this export.
+ */
+EXPORT_SYMBOL_GPL(agp_memory_reserved);
+
+#if defined(CONFIG_X86)
+int map_page_into_agp(struct page *page)
+{
+	int i;
+	i = change_page_attr(page, 1, PAGE_KERNEL_NOCACHE);
+	global_flush_tlb();
+	return i;
+}
+EXPORT_SYMBOL_GPL(map_page_into_agp);
+
+int unmap_page_from_agp(struct page *page)
+{
+	int i;
+	i = change_page_attr(page, 1, PAGE_KERNEL);
+	global_flush_tlb();
+	return i;
+}
+EXPORT_SYMBOL_GPL(unmap_page_from_agp);
+#endif
+
+/*
+ * Generic routines for handling agp_memory structures -
+ * They use the basic page allocation routines to do the brunt of the work.
+ */
+
+void agp_free_key(int key)
+{
+	if (key < 0)
+		return;
+
+	if (key < MAXKEY)
+		clear_bit(key, agp_bridge->key_list);
+}
+EXPORT_SYMBOL(agp_free_key);
+
+
+static int agp_get_key(void)
+{
+	int bit;
+
+	bit = find_first_zero_bit(agp_bridge->key_list, MAXKEY);
+	if (bit < MAXKEY) {
+		set_bit(bit, agp_bridge->key_list);
+		return bit;
+	}
+	return -1;
+}
+
+
+struct agp_memory *agp_create_memory(int scratch_pages)
+{
+	struct agp_memory *new;
+
+	new = kmalloc(sizeof(struct agp_memory), GFP_KERNEL);
+
+	if (new == NULL)
+		return NULL;
+
+	memset(new, 0, sizeof(struct agp_memory));
+	new->key = agp_get_key();
+
+	if (new->key < 0) {
+		kfree(new);
+		return NULL;
+	}
+	new->memory = vmalloc(PAGE_SIZE * scratch_pages);
+
+	if (new->memory == NULL) {
+		agp_free_key(new->key);
+		kfree(new);
+		return NULL;
+	}
+	new->num_scratch_pages = scratch_pages;
+	return new;
+}
+EXPORT_SYMBOL(agp_create_memory);
+
+/**
+ *	agp_free_memory - free memory associated with an agp_memory pointer.
+ *
+ *	@curr:		agp_memory pointer to be freed.
+ *
+ *	It is the only function that can be called when the backend is not owned
+ *	by the caller.  (So it can free memory on client death.)
+ */
+void agp_free_memory(struct agp_memory *curr)
+{
+	size_t i;
+
+	if (curr == NULL)
+		return;
+
+	if (curr->is_bound == TRUE)
+		agp_unbind_memory(curr);
+
+	if (curr->type != 0) {
+		curr->bridge->driver->free_by_type(curr);
+		return;
+	}
+	if (curr->page_count != 0) {
+		for (i = 0; i < curr->page_count; i++) {
+			curr->bridge->driver->agp_destroy_page(phys_to_virt(curr->memory[i]));
+		}
+	}
+	agp_free_key(curr->key);
+	vfree(curr->memory);
+	kfree(curr);
+}
+EXPORT_SYMBOL(agp_free_memory);
+
+#define ENTRIES_PER_PAGE		(PAGE_SIZE / sizeof(unsigned long))
+
+/**
+ *	agp_allocate_memory  -  allocate a group of pages of a certain type.
+ *
+ *	@page_count:	size_t argument of the number of pages
+ *	@type:	u32 argument of the type of memory to be allocated.
+ *
+ *	Every agp bridge device will allow you to allocate AGP_NORMAL_MEMORY which
+ *	maps to physical ram.  Any other type is device dependent.
+ *
+ *	It returns NULL whenever memory is unavailable.
+ */
+struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge,
+					size_t page_count, u32 type)
+{
+	int scratch_pages;
+	struct agp_memory *new;
+	size_t i;
+
+	if (!bridge)
+		return NULL;
+
+	if ((atomic_read(&bridge->current_memory_agp) + page_count) > bridge->max_memory_agp)
+		return NULL;
+
+	if (type != 0) {
+		new = bridge->driver->alloc_by_type(page_count, type);
+		if (new)
+			new->bridge = bridge;
+		return new;
+	}
+
+	scratch_pages = (page_count + ENTRIES_PER_PAGE - 1) / ENTRIES_PER_PAGE;
+
+	new = agp_create_memory(scratch_pages);
+
+	if (new == NULL)
+		return NULL;
+
+	for (i = 0; i < page_count; i++) {
+		void *addr = bridge->driver->agp_alloc_page(bridge);
+
+		if (addr == NULL) {
+			agp_free_memory(new);
+			return NULL;
+		}
+		new->memory[i] = virt_to_phys(addr);
+		new->page_count++;
+	}
+       new->bridge = bridge;
+
+	flush_agp_mappings();
+
+	return new;
+}
+EXPORT_SYMBOL(agp_allocate_memory);
+
+
+/* End - Generic routines for handling agp_memory structures */
+
+
+static int agp_return_size(void)
+{
+	int current_size;
+	void *temp;
+
+	temp = agp_bridge->current_size;
+
+	switch (agp_bridge->driver->size_type) {
+	case U8_APER_SIZE:
+		current_size = A_SIZE_8(temp)->size;
+		break;
+	case U16_APER_SIZE:
+		current_size = A_SIZE_16(temp)->size;
+		break;
+	case U32_APER_SIZE:
+		current_size = A_SIZE_32(temp)->size;
+		break;
+	case LVL2_APER_SIZE:
+		current_size = A_SIZE_LVL2(temp)->size;
+		break;
+	case FIXED_APER_SIZE:
+		current_size = A_SIZE_FIX(temp)->size;
+		break;
+	default:
+		current_size = 0;
+		break;
+	}
+
+	current_size -= (agp_memory_reserved / (1024*1024));
+	if (current_size <0)
+		current_size = 0;
+	return current_size;
+}
+
+
+int agp_num_entries(void)
+{
+	int num_entries;
+	void *temp;
+
+	temp = agp_bridge->current_size;
+
+	switch (agp_bridge->driver->size_type) {
+	case U8_APER_SIZE:
+		num_entries = A_SIZE_8(temp)->num_entries;
+		break;
+	case U16_APER_SIZE:
+		num_entries = A_SIZE_16(temp)->num_entries;
+		break;
+	case U32_APER_SIZE:
+		num_entries = A_SIZE_32(temp)->num_entries;
+		break;
+	case LVL2_APER_SIZE:
+		num_entries = A_SIZE_LVL2(temp)->num_entries;
+		break;
+	case FIXED_APER_SIZE:
+		num_entries = A_SIZE_FIX(temp)->num_entries;
+		break;
+	default:
+		num_entries = 0;
+		break;
+	}
+
+	num_entries -= agp_memory_reserved>>PAGE_SHIFT;
+	if (num_entries<0)
+		num_entries = 0;
+	return num_entries;
+}
+EXPORT_SYMBOL_GPL(agp_num_entries);
+
+
+static int check_bridge_mode(struct pci_dev *dev)
+{
+	u32 agp3;
+	u8 cap_ptr;
+
+	cap_ptr = pci_find_capability(dev, PCI_CAP_ID_AGP);
+	pci_read_config_dword(dev, cap_ptr+AGPSTAT, &agp3);
+	if (agp3 & AGPSTAT_MODE_3_0)
+		return 1;
+	return 0;
+}
+
+
+/**
+ *	agp_copy_info  -  copy bridge state information
+ *
+ *	@info:		agp_kern_info pointer.  The caller should insure that this pointer is valid. 
+ *
+ *	This function copies information about the agp bridge device and the state of
+ *	the agp backend into an agp_kern_info pointer.
+ */
+int agp_copy_info(struct agp_bridge_data *bridge, struct agp_kern_info *info)
+{
+	memset(info, 0, sizeof(struct agp_kern_info));
+	if (!bridge) {
+		info->chipset = NOT_SUPPORTED;
+		return -EIO;
+	}
+
+	info->version.major = bridge->version->major;
+	info->version.minor = bridge->version->minor;
+	info->chipset = SUPPORTED;
+	info->device = bridge->dev;
+	if (check_bridge_mode(bridge->dev))
+		info->mode = bridge->mode & ~AGP3_RESERVED_MASK;
+	else
+		info->mode = bridge->mode & ~AGP2_RESERVED_MASK;
+	info->mode = bridge->mode;
+	info->aper_base = bridge->gart_bus_addr;
+	info->aper_size = agp_return_size();
+	info->max_memory = bridge->max_memory_agp;
+	info->current_memory = atomic_read(&bridge->current_memory_agp);
+	info->cant_use_aperture = bridge->driver->cant_use_aperture;
+	info->vm_ops = bridge->vm_ops;
+	info->page_mask = ~0UL;
+	return 0;
+}
+EXPORT_SYMBOL(agp_copy_info);
+
+/* End - Routine to copy over information structure */
+
+/*
+ * Routines for handling swapping of agp_memory into the GATT -
+ * These routines take agp_memory and insert them into the GATT.
+ * They call device specific routines to actually write to the GATT.
+ */
+
+/**
+ *	agp_bind_memory  -  Bind an agp_memory structure into the GATT.
+ *
+ *	@curr:		agp_memory pointer
+ *	@pg_start:	an offset into the graphics aperture translation table
+ *
+ *	It returns -EINVAL if the pointer == NULL.
+ *	It returns -EBUSY if the area of the table requested is already in use.
+ */
+int agp_bind_memory(struct agp_memory *curr, off_t pg_start)
+{
+	int ret_val;
+
+	if (curr == NULL)
+		return -EINVAL;
+
+	if (curr->is_bound == TRUE) {
+		printk (KERN_INFO PFX "memory %p is already bound!\n", curr);
+		return -EINVAL;
+	}
+	if (curr->is_flushed == FALSE) {
+		curr->bridge->driver->cache_flush();
+		curr->is_flushed = TRUE;
+	}
+	ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type);
+
+	if (ret_val != 0)
+		return ret_val;
+
+	curr->is_bound = TRUE;
+	curr->pg_start = pg_start;
+	return 0;
+}
+EXPORT_SYMBOL(agp_bind_memory);
+
+
+/**
+ *	agp_unbind_memory  -  Removes an agp_memory structure from the GATT
+ *
+ * @curr:	agp_memory pointer to be removed from the GATT.
+ *
+ * It returns -EINVAL if this piece of agp_memory is not currently bound to
+ * the graphics aperture translation table or if the agp_memory pointer == NULL
+ */
+int agp_unbind_memory(struct agp_memory *curr)
+{
+	int ret_val;
+
+	if (curr == NULL)
+		return -EINVAL;
+
+	if (curr->is_bound != TRUE) {
+		printk (KERN_INFO PFX "memory %p was not bound!\n", curr);
+		return -EINVAL;
+	}
+
+	ret_val = curr->bridge->driver->remove_memory(curr, curr->pg_start, curr->type);
+
+	if (ret_val != 0)
+		return ret_val;
+
+	curr->is_bound = FALSE;
+	curr->pg_start = 0;
+	return 0;
+}
+EXPORT_SYMBOL(agp_unbind_memory);
+
+/* End - Routines for handling swapping of agp_memory into the GATT */
+
+
+/* Generic Agp routines - Start */
+static void agp_v2_parse_one(u32 *requested_mode, u32 *bridge_agpstat, u32 *vga_agpstat)
+{
+	u32 tmp;
+
+	if (*requested_mode & AGP2_RESERVED_MASK) {
+		printk (KERN_INFO PFX "reserved bits set in mode 0x%x. Fixed.\n", *requested_mode);
+		*requested_mode &= ~AGP2_RESERVED_MASK;
+	}
+
+	/* Check the speed bits make sense. Only one should be set. */
+	tmp = *requested_mode & 7;
+	switch (tmp) {
+		case 0:
+			printk (KERN_INFO PFX "%s tried to set rate=x0. Setting to x1 mode.\n", current->comm);
+			*requested_mode |= AGPSTAT2_1X;
+			break;
+		case 1:
+		case 2:
+			break;
+		case 3:
+			*requested_mode &= ~(AGPSTAT2_1X);	/* rate=2 */
+			break;
+		case 4:
+			break;
+		case 5:
+		case 6:
+		case 7:
+			*requested_mode &= ~(AGPSTAT2_1X|AGPSTAT2_2X); /* rate=4*/
+			break;
+	}
+
+	/* disable SBA if it's not supported */
+	if (!((*bridge_agpstat & AGPSTAT_SBA) && (*vga_agpstat & AGPSTAT_SBA) && (*requested_mode & AGPSTAT_SBA)))
+		*bridge_agpstat &= ~AGPSTAT_SBA;
+
+	/* Set rate */
+	if (!((*bridge_agpstat & AGPSTAT2_4X) && (*vga_agpstat & AGPSTAT2_4X) && (*requested_mode & AGPSTAT2_4X)))
+		*bridge_agpstat &= ~AGPSTAT2_4X;
+
+	if (!((*bridge_agpstat & AGPSTAT2_2X) && (*vga_agpstat & AGPSTAT2_2X) && (*requested_mode & AGPSTAT2_2X)))
+		*bridge_agpstat &= ~AGPSTAT2_2X;
+
+	if (!((*bridge_agpstat & AGPSTAT2_1X) && (*vga_agpstat & AGPSTAT2_1X) && (*requested_mode & AGPSTAT2_1X)))
+		*bridge_agpstat &= ~AGPSTAT2_1X;
+
+	/* Now we know what mode it should be, clear out the unwanted bits. */
+	if (*bridge_agpstat & AGPSTAT2_4X)
+		*bridge_agpstat &= ~(AGPSTAT2_1X | AGPSTAT2_2X);	/* 4X */
+
+	if (*bridge_agpstat & AGPSTAT2_2X)
+		*bridge_agpstat &= ~(AGPSTAT2_1X | AGPSTAT2_4X);	/* 2X */
+
+	if (*bridge_agpstat & AGPSTAT2_1X)
+		*bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X);	/* 1X */
+
+	/* Apply any errata. */
+	if (agp_bridge->flags & AGP_ERRATA_FASTWRITES)
+		*bridge_agpstat &= ~AGPSTAT_FW;
+
+	if (agp_bridge->flags & AGP_ERRATA_SBA)
+		*bridge_agpstat &= ~AGPSTAT_SBA;
+
+	if (agp_bridge->flags & AGP_ERRATA_1X) {
+		*bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X);
+		*bridge_agpstat |= AGPSTAT2_1X;
+	}
+
+	/* If we've dropped down to 1X, disable fast writes. */
+	if (*bridge_agpstat & AGPSTAT2_1X)
+		*bridge_agpstat &= ~AGPSTAT_FW;
+}
+
+/*
+ * requested_mode = Mode requested by (typically) X.
+ * bridge_agpstat = PCI_AGP_STATUS from agp bridge.
+ * vga_agpstat = PCI_AGP_STATUS from graphic card.
+ */
+static void agp_v3_parse_one(u32 *requested_mode, u32 *bridge_agpstat, u32 *vga_agpstat)
+{
+	u32 origbridge=*bridge_agpstat, origvga=*vga_agpstat;
+	u32 tmp;
+
+	if (*requested_mode & AGP3_RESERVED_MASK) {
+		printk (KERN_INFO PFX "reserved bits set in mode 0x%x. Fixed.\n", *requested_mode);
+		*requested_mode &= ~AGP3_RESERVED_MASK;
+	}
+
+	/* Check the speed bits make sense. */
+	tmp = *requested_mode & 7;
+	if (tmp == 0) {
+		printk (KERN_INFO PFX "%s tried to set rate=x0. Setting to AGP3 x4 mode.\n", current->comm);
+		*requested_mode |= AGPSTAT3_4X;
+	}
+	if (tmp >= 3) {
+		printk (KERN_INFO PFX "%s tried to set rate=x%d. Setting to AGP3 x8 mode.\n", current->comm, tmp * 4);
+		*requested_mode = (*requested_mode & ~7) | AGPSTAT3_8X;
+	}
+
+	/* ARQSZ - Set the value to the maximum one.
+	 * Don't allow the mode register to override values. */
+	*bridge_agpstat = ((*bridge_agpstat & ~AGPSTAT_ARQSZ) |
+		max_t(u32,(*bridge_agpstat & AGPSTAT_ARQSZ),(*vga_agpstat & AGPSTAT_ARQSZ)));
+
+	/* Calibration cycle.
+	 * Don't allow the mode register to override values. */
+	*bridge_agpstat = ((*bridge_agpstat & ~AGPSTAT_CAL_MASK) |
+		min_t(u32,(*bridge_agpstat & AGPSTAT_CAL_MASK),(*vga_agpstat & AGPSTAT_CAL_MASK)));
+
+	/* SBA *must* be supported for AGP v3 */
+	*bridge_agpstat |= AGPSTAT_SBA;
+
+	/*
+	 * Set speed.
+	 * Check for invalid speeds. This can happen when applications
+	 * written before the AGP 3.0 standard pass AGP2.x modes to AGP3 hardware
+	 */
+	if (*requested_mode & AGPSTAT_MODE_3_0) {
+		/*
+		 * Caller hasn't a clue what it is doing. Bridge is in 3.0 mode,
+		 * have been passed a 3.0 mode, but with 2.x speed bits set.
+		 * AGP2.x 4x -> AGP3.0 4x.
+		 */
+		if (*requested_mode & AGPSTAT2_4X) {
+			printk (KERN_INFO PFX "%s passes broken AGP3 flags (%x). Fixed.\n",
+						current->comm, *requested_mode);
+			*requested_mode &= ~AGPSTAT2_4X;
+			*requested_mode |= AGPSTAT3_4X;
+		}
+	} else {
+		/*
+		 * The caller doesn't know what they are doing. We are in 3.0 mode,
+		 * but have been passed an AGP 2.x mode.
+		 * Convert AGP 1x,2x,4x -> AGP 3.0 4x.
+		 */
+		printk (KERN_INFO PFX "%s passes broken AGP2 flags (%x) in AGP3 mode. Fixed.\n",
+					current->comm, *requested_mode);
+		*requested_mode &= ~(AGPSTAT2_4X | AGPSTAT2_2X | AGPSTAT2_1X);
+		*requested_mode |= AGPSTAT3_4X;
+	}
+
+	if (*requested_mode & AGPSTAT3_8X) {
+		if (!(*bridge_agpstat & AGPSTAT3_8X)) {
+			*bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
+			*bridge_agpstat |= AGPSTAT3_4X;
+			printk ("%s requested AGPx8 but bridge not capable.\n", current->comm);
+			return;
+		}
+		if (!(*vga_agpstat & AGPSTAT3_8X)) {
+			*bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
+			*bridge_agpstat |= AGPSTAT3_4X;
+			printk ("%s requested AGPx8 but graphic card not capable.\n", current->comm);
+			return;
+		}
+		/* All set, bridge & device can do AGP x8*/
+		*bridge_agpstat &= ~(AGPSTAT3_4X | AGPSTAT3_RSVD);
+		goto done;
+
+	} else {
+
+		/*
+		 * If we didn't specify AGPx8, we can only do x4.
+		 * If the hardware can't do x4, we're up shit creek, and never
+		 *  should have got this far.
+		 */
+		*bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
+		if ((*bridge_agpstat & AGPSTAT3_4X) && (*vga_agpstat & AGPSTAT3_4X))
+			*bridge_agpstat |= AGPSTAT3_4X;
+		else {
+			printk (KERN_INFO PFX "Badness. Don't know which AGP mode to set. "
+							"[bridge_agpstat:%x vga_agpstat:%x fell back to:- bridge_agpstat:%x vga_agpstat:%x]\n",
+							origbridge, origvga, *bridge_agpstat, *vga_agpstat);
+			if (!(*bridge_agpstat & AGPSTAT3_4X))
+				printk (KERN_INFO PFX "Bridge couldn't do AGP x4.\n");
+			if (!(*vga_agpstat & AGPSTAT3_4X))
+				printk (KERN_INFO PFX "Graphic card couldn't do AGP x4.\n");
+			return;
+		}
+	}
+
+done:
+	/* Apply any errata. */
+	if (agp_bridge->flags & AGP_ERRATA_FASTWRITES)
+		*bridge_agpstat &= ~AGPSTAT_FW;
+
+	if (agp_bridge->flags & AGP_ERRATA_SBA)
+		*bridge_agpstat &= ~AGPSTAT_SBA;
+
+	if (agp_bridge->flags & AGP_ERRATA_1X) {
+		*bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X);
+		*bridge_agpstat |= AGPSTAT2_1X;
+	}
+}
+
+
+/**
+ * agp_collect_device_status - determine correct agp_cmd from various agp_stat's
+ * @bridge: an agp_bridge_data struct allocated for the AGP host bridge.
+ * @requested_mode: requested agp_stat from userspace (Typically from X)
+ * @bridge_agpstat: current agp_stat from AGP bridge.
+ *
+ * This function will hunt for an AGP graphics card, and try to match
+ * the requested mode to the capabilities of both the bridge and the card.
+ */
+u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode, u32 bridge_agpstat)
+{
+	struct pci_dev *device = NULL;
+	u32 vga_agpstat;
+	u8 cap_ptr;
+
+	for (;;) {
+		device = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, device);
+		if (!device) {
+			printk (KERN_INFO PFX "Couldn't find an AGP VGA controller.\n");
+			return 0;
+		}
+		cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP);
+		if (cap_ptr)
+			break;
+	}
+
+	/*
+	 * Ok, here we have a AGP device. Disable impossible
+	 * settings, and adjust the readqueue to the minimum.
+	 */
+	pci_read_config_dword(device, cap_ptr+PCI_AGP_STATUS, &vga_agpstat);
+
+	/* adjust RQ depth */
+	bridge_agpstat = ((bridge_agpstat & ~AGPSTAT_RQ_DEPTH) |
+	     min_t(u32, (requested_mode & AGPSTAT_RQ_DEPTH),
+		 min_t(u32, (bridge_agpstat & AGPSTAT_RQ_DEPTH), (vga_agpstat & AGPSTAT_RQ_DEPTH))));
+
+	/* disable FW if it's not supported */
+	if (!((bridge_agpstat & AGPSTAT_FW) &&
+		 (vga_agpstat & AGPSTAT_FW) &&
+		 (requested_mode & AGPSTAT_FW)))
+		bridge_agpstat &= ~AGPSTAT_FW;
+
+	/* Check to see if we are operating in 3.0 mode */
+	if (check_bridge_mode(agp_bridge->dev))
+		agp_v3_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat);
+	else
+		agp_v2_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat);
+
+	pci_dev_put(device);
+	return bridge_agpstat;
+}
+EXPORT_SYMBOL(agp_collect_device_status);
+
+
+void agp_device_command(u32 bridge_agpstat, int agp_v3)
+{
+	struct pci_dev *device = NULL;
+	int mode;
+
+	mode = bridge_agpstat & 0x7;
+	if (agp_v3)
+		mode *= 4;
+
+	for_each_pci_dev(device) {
+		u8 agp = pci_find_capability(device, PCI_CAP_ID_AGP);
+		if (!agp)
+			continue;
+
+		printk(KERN_INFO PFX "Putting AGP V%d device at %s into %dx mode\n",
+				agp_v3 ? 3 : 2, pci_name(device), mode);
+		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, bridge_agpstat);
+	}
+}
+EXPORT_SYMBOL(agp_device_command);
+
+
+void get_agp_version(struct agp_bridge_data *bridge)
+{
+	u32 ncapid;
+
+	/* Exit early if already set by errata workarounds. */
+	if (bridge->major_version != 0)
+		return;
+
+	pci_read_config_dword(bridge->dev, bridge->capndx, &ncapid);
+	bridge->major_version = (ncapid >> AGP_MAJOR_VERSION_SHIFT) & 0xf;
+	bridge->minor_version = (ncapid >> AGP_MINOR_VERSION_SHIFT) & 0xf;
+}
+EXPORT_SYMBOL(get_agp_version);
+
+
+void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
+{
+	u32 bridge_agpstat, temp;
+
+	get_agp_version(agp_bridge);
+
+	printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
+				agp_bridge->major_version,
+				agp_bridge->minor_version,
+				pci_name(agp_bridge->dev));
+
+	pci_read_config_dword(agp_bridge->dev,
+		      agp_bridge->capndx + PCI_AGP_STATUS, &bridge_agpstat);
+
+	bridge_agpstat = agp_collect_device_status(agp_bridge, requested_mode, bridge_agpstat);
+	if (bridge_agpstat == 0)
+		/* Something bad happened. FIXME: Return error code? */
+		return;
+
+	bridge_agpstat |= AGPSTAT_AGP_ENABLE;
+
+	/* Do AGP version specific frobbing. */
+	if (bridge->major_version >= 3) {
+		if (check_bridge_mode(bridge->dev)) {
+			/* If we have 3.5, we can do the isoch stuff. */
+			if (bridge->minor_version >= 5)
+				agp_3_5_enable(bridge);
+			agp_device_command(bridge_agpstat, TRUE);
+			return;
+		} else {
+		    /* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/
+		    bridge_agpstat &= ~(7<<10) ;
+		    pci_read_config_dword(bridge->dev,
+					bridge->capndx+AGPCTRL, &temp);
+		    temp |= (1<<9);
+		    pci_write_config_dword(bridge->dev,
+					bridge->capndx+AGPCTRL, temp);
+
+		    printk (KERN_INFO PFX "Device is in legacy mode,"
+				" falling back to 2.x\n");
+		}
+	}
+
+	/* AGP v<3 */
+	agp_device_command(bridge_agpstat, FALSE);
+}
+EXPORT_SYMBOL(agp_generic_enable);
+
+
+int agp_generic_create_gatt_table(struct agp_bridge_data *bridge)
+{
+	char *table;
+	char *table_end;
+	int size;
+	int page_order;
+	int num_entries;
+	int i;
+	void *temp;
+	struct page *page;
+
+	/* The generic routines can't handle 2 level gatt's */
+	if (bridge->driver->size_type == LVL2_APER_SIZE)
+		return -EINVAL;
+
+	table = NULL;
+	i = bridge->aperture_size_idx;
+	temp = bridge->current_size;
+	size = page_order = num_entries = 0;
+
+	if (bridge->driver->size_type != FIXED_APER_SIZE) {
+		do {
+			switch (bridge->driver->size_type) {
+			case U8_APER_SIZE:
+				size = A_SIZE_8(temp)->size;
+				page_order =
+				    A_SIZE_8(temp)->page_order;
+				num_entries =
+				    A_SIZE_8(temp)->num_entries;
+				break;
+			case U16_APER_SIZE:
+				size = A_SIZE_16(temp)->size;
+				page_order = A_SIZE_16(temp)->page_order;
+				num_entries = A_SIZE_16(temp)->num_entries;
+				break;
+			case U32_APER_SIZE:
+				size = A_SIZE_32(temp)->size;
+				page_order = A_SIZE_32(temp)->page_order;
+				num_entries = A_SIZE_32(temp)->num_entries;
+				break;
+				/* This case will never really happen. */
+			case FIXED_APER_SIZE:
+			case LVL2_APER_SIZE:
+			default:
+				size = page_order = num_entries = 0;
+				break;
+			}
+
+			table = (char *) __get_free_pages(GFP_KERNEL,
+							  page_order);
+
+			if (table == NULL) {
+				i++;
+				switch (bridge->driver->size_type) {
+				case U8_APER_SIZE:
+					bridge->current_size = A_IDX8(bridge);
+					break;
+				case U16_APER_SIZE:
+					bridge->current_size = A_IDX16(bridge);
+					break;
+				case U32_APER_SIZE:
+					bridge->current_size = A_IDX32(bridge);
+					break;
+					/* This case will never really happen. */
+				case FIXED_APER_SIZE:
+				case LVL2_APER_SIZE:
+				default:
+					bridge->current_size =
+					    bridge->current_size;
+					break;
+				}
+				temp = bridge->current_size;
+			} else {
+				bridge->aperture_size_idx = i;
+			}
+		} while (!table && (i < bridge->driver->num_aperture_sizes));
+	} else {
+		size = ((struct aper_size_info_fixed *) temp)->size;
+		page_order = ((struct aper_size_info_fixed *) temp)->page_order;
+		num_entries = ((struct aper_size_info_fixed *) temp)->num_entries;
+		table = (char *) __get_free_pages(GFP_KERNEL, page_order);
+	}
+
+	if (table == NULL)
+		return -ENOMEM;
+
+	table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
+
+	for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
+		SetPageReserved(page);
+
+	bridge->gatt_table_real = (u32 *) table;
+	agp_gatt_table = (void *)table;
+
+	bridge->driver->cache_flush();
+	bridge->gatt_table = ioremap_nocache(virt_to_phys(table),
+					(PAGE_SIZE * (1 << page_order)));
+	bridge->driver->cache_flush();
+
+	if (bridge->gatt_table == NULL) {
+		for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
+			ClearPageReserved(page);
+
+		free_pages((unsigned long) table, page_order);
+
+		return -ENOMEM;
+	}
+	bridge->gatt_bus_addr = virt_to_phys(bridge->gatt_table_real);
+
+	/* AK: bogus, should encode addresses > 4GB */
+	for (i = 0; i < num_entries; i++) {
+		writel(bridge->scratch_page, bridge->gatt_table+i);
+		readl(bridge->gatt_table+i);	/* PCI Posting. */
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(agp_generic_create_gatt_table);
+
+int agp_generic_free_gatt_table(struct agp_bridge_data *bridge)
+{
+	int page_order;
+	char *table, *table_end;
+	void *temp;
+	struct page *page;
+
+	temp = bridge->current_size;
+
+	switch (bridge->driver->size_type) {
+	case U8_APER_SIZE:
+		page_order = A_SIZE_8(temp)->page_order;
+		break;
+	case U16_APER_SIZE:
+		page_order = A_SIZE_16(temp)->page_order;
+		break;
+	case U32_APER_SIZE:
+		page_order = A_SIZE_32(temp)->page_order;
+		break;
+	case FIXED_APER_SIZE:
+		page_order = A_SIZE_FIX(temp)->page_order;
+		break;
+	case LVL2_APER_SIZE:
+		/* The generic routines can't deal with 2 level gatt's */
+		return -EINVAL;
+		break;
+	default:
+		page_order = 0;
+		break;
+	}
+
+	/* Do not worry about freeing memory, because if this is
+	 * called, then all agp memory is deallocated and removed
+	 * from the table. */
+
+	iounmap(bridge->gatt_table);
+	table = (char *) bridge->gatt_table_real;
+	table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
+
+	for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
+		ClearPageReserved(page);
+
+	free_pages((unsigned long) bridge->gatt_table_real, page_order);
+
+	agp_gatt_table = NULL;
+	bridge->gatt_table = NULL;
+	bridge->gatt_table_real = NULL;
+	bridge->gatt_bus_addr = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(agp_generic_free_gatt_table);
+
+
+int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type)
+{
+	int num_entries;
+	size_t i;
+	off_t j;
+	void *temp;
+	struct agp_bridge_data *bridge;
+
+	bridge = mem->bridge;
+	if (!bridge)
+		return -EINVAL;
+
+	temp = bridge->current_size;
+
+	switch (bridge->driver->size_type) {
+	case U8_APER_SIZE:
+		num_entries = A_SIZE_8(temp)->num_entries;
+		break;
+	case U16_APER_SIZE:
+		num_entries = A_SIZE_16(temp)->num_entries;
+		break;
+	case U32_APER_SIZE:
+		num_entries = A_SIZE_32(temp)->num_entries;
+		break;
+	case FIXED_APER_SIZE:
+		num_entries = A_SIZE_FIX(temp)->num_entries;
+		break;
+	case LVL2_APER_SIZE:
+		/* The generic routines can't deal with 2 level gatt's */
+		return -EINVAL;
+		break;
+	default:
+		num_entries = 0;
+		break;
+	}
+
+	num_entries -= agp_memory_reserved/PAGE_SIZE;
+	if (num_entries < 0) num_entries = 0;
+
+	if (type != 0 || mem->type != 0) {
+		/* The generic routines know nothing of memory types */
+		return -EINVAL;
+	}
+
+	/* AK: could wrap */
+	if ((pg_start + mem->page_count) > num_entries)
+		return -EINVAL;
+
+	j = pg_start;
+
+	while (j < (pg_start + mem->page_count)) {
+		if (!PGE_EMPTY(bridge, readl(bridge->gatt_table+j)))
+			return -EBUSY;
+		j++;
+	}
+
+	if (mem->is_flushed == FALSE) {
+		bridge->driver->cache_flush();
+		mem->is_flushed = TRUE;
+	}
+
+	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
+		writel(bridge->driver->mask_memory(bridge, mem->memory[i], mem->type), bridge->gatt_table+j);
+		readl(bridge->gatt_table+j);	/* PCI Posting. */
+	}
+
+	bridge->driver->tlb_flush(mem);
+	return 0;
+}
+EXPORT_SYMBOL(agp_generic_insert_memory);
+
+
+int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
+{
+	size_t i;
+	struct agp_bridge_data *bridge;
+
+	bridge = mem->bridge;
+	if (!bridge)
+		return -EINVAL;
+
+	if (type != 0 || mem->type != 0) {
+		/* The generic routines know nothing of memory types */
+		return -EINVAL;
+	}
+
+	/* AK: bogus, should encode addresses > 4GB */
+	for (i = pg_start; i < (mem->page_count + pg_start); i++) {
+		writel(bridge->scratch_page, bridge->gatt_table+i);
+		readl(bridge->gatt_table+i);	/* PCI Posting. */
+	}
+
+	global_cache_flush();
+	bridge->driver->tlb_flush(mem);
+	return 0;
+}
+EXPORT_SYMBOL(agp_generic_remove_memory);
+
+
+struct agp_memory *agp_generic_alloc_by_type(size_t page_count, int type)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(agp_generic_alloc_by_type);
+
+
+void agp_generic_free_by_type(struct agp_memory *curr)
+{
+	vfree(curr->memory);
+	agp_free_key(curr->key);
+	kfree(curr);
+}
+EXPORT_SYMBOL(agp_generic_free_by_type);
+
+
+/*
+ * Basic Page Allocation Routines -
+ * These routines handle page allocation and by default they reserve the allocated
+ * memory.  They also handle incrementing the current_memory_agp value, Which is checked
+ * against a maximum value.
+ */
+
+void *agp_generic_alloc_page(struct agp_bridge_data *bridge)
+{
+	struct page * page;
+
+	page = alloc_page(GFP_KERNEL);
+	if (page == NULL)
+		return NULL;
+
+	map_page_into_agp(page);
+
+	get_page(page);
+	SetPageLocked(page);
+	atomic_inc(&agp_bridge->current_memory_agp);
+	return page_address(page);
+}
+EXPORT_SYMBOL(agp_generic_alloc_page);
+
+
+void agp_generic_destroy_page(void *addr)
+{
+	struct page *page;
+
+	if (addr == NULL)
+		return;
+
+	page = virt_to_page(addr);
+	unmap_page_from_agp(page);
+	put_page(page);
+	unlock_page(page);
+	free_page((unsigned long)addr);
+	atomic_dec(&agp_bridge->current_memory_agp);
+}
+EXPORT_SYMBOL(agp_generic_destroy_page);
+
+/* End Basic Page Allocation Routines */
+
+
+/**
+ * agp_enable  -  initialise the agp point-to-point connection.
+ *
+ * @mode:	agp mode register value to configure with.
+ */
+void agp_enable(struct agp_bridge_data *bridge, u32 mode)
+{
+	if (!bridge)
+		return;
+	bridge->driver->agp_enable(bridge, mode);
+}
+EXPORT_SYMBOL(agp_enable);
+
+/* When we remove the global variable agp_bridge from all drivers
+ * then agp_alloc_bridge and agp_generic_find_bridge need to be updated
+ */
+
+struct agp_bridge_data *agp_generic_find_bridge(struct pci_dev *pdev)
+{
+	if (list_empty(&agp_bridges))
+		return NULL;
+
+	return agp_bridge;
+}
+
+static void ipi_handler(void *null)
+{
+	flush_agp_cache();
+}
+
+void global_cache_flush(void)
+{
+	if (on_each_cpu(ipi_handler, NULL, 1, 1) != 0)
+		panic(PFX "timed out waiting for the other CPUs!\n");
+}
+EXPORT_SYMBOL(global_cache_flush);
+
+unsigned long agp_generic_mask_memory(struct agp_bridge_data *bridge,
+	unsigned long addr, int type)
+{
+	/* memory type is ignored in the generic routine */
+	if (bridge->driver->masks)
+		return addr | bridge->driver->masks[0].mask;
+	else
+		return addr;
+}
+EXPORT_SYMBOL(agp_generic_mask_memory);
+
+/*
+ * These functions are implemented according to the AGPv3 spec,
+ * which covers implementation details that had previously been
+ * left open.
+ */
+
+int agp3_generic_fetch_size(void)
+{
+	u16 temp_size;
+	int i;
+	struct aper_size_info_16 *values;
+
+	pci_read_config_word(agp_bridge->dev, agp_bridge->capndx+AGPAPSIZE, &temp_size);
+	values = A_SIZE_16(agp_bridge->driver->aperture_sizes);
+
+	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
+		if (temp_size == values[i].size_value) {
+			agp_bridge->previous_size =
+				agp_bridge->current_size = (void *) (values + i);
+
+			agp_bridge->aperture_size_idx = i;
+			return values[i].size;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL(agp3_generic_fetch_size);
+
+void agp3_generic_tlbflush(struct agp_memory *mem)
+{
+	u32 ctrl;
+	pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &ctrl);
+	pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl & ~AGPCTRL_GTLBEN);
+	pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl);
+}
+EXPORT_SYMBOL(agp3_generic_tlbflush);
+
+int agp3_generic_configure(void)
+{
+	u32 temp;
+	struct aper_size_info_16 *current_size;
+
+	current_size = A_SIZE_16(agp_bridge->current_size);
+
+	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
+	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
+
+	/* set aperture size */
+	pci_write_config_word(agp_bridge->dev, agp_bridge->capndx+AGPAPSIZE, current_size->size_value);
+	/* set gart pointer */
+	pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPGARTLO, agp_bridge->gatt_bus_addr);
+	/* enable aperture and GTLB */
+	pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &temp);
+	pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, temp | AGPCTRL_APERENB | AGPCTRL_GTLBEN);
+	return 0;
+}
+EXPORT_SYMBOL(agp3_generic_configure);
+
+void agp3_generic_cleanup(void)
+{
+	u32 ctrl;
+	pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &ctrl);
+	pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl & ~AGPCTRL_APERENB);
+}
+EXPORT_SYMBOL(agp3_generic_cleanup);
+
+struct aper_size_info_16 agp3_generic_sizes[AGP_GENERIC_SIZES_ENTRIES] =
+{
+	{4096, 1048576, 10,0x000},
+	{2048,  524288, 9, 0x800},
+	{1024,  262144, 8, 0xc00},
+	{ 512,  131072, 7, 0xe00},
+	{ 256,   65536, 6, 0xf00},
+	{ 128,   32768, 5, 0xf20},
+	{  64,   16384, 4, 0xf30},
+	{  32,    8192, 3, 0xf38},
+	{  16,    4096, 2, 0xf3c},
+	{   8,    2048, 1, 0xf3e},
+	{   4,    1024, 0, 0xf3f}
+};
+EXPORT_SYMBOL(agp3_generic_sizes);
+