Remove legacy CDROM drivers

They are all broken beyond repair. Given that nobody has complained
about them (most haven't worked in 2.6 AT ALL), remove them from the
tree.

A new mitsumi driver that actually works is in progress, it'll get
added when completed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

22 files changed, 0 insertions, 24845 deletions

diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
deleted file mode 100644
index 4b12e9031fb..00000000000
--- a/drivers/cdrom/Kconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-#
-# CDROM driver configuration
-#
-
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
-	depends on ISA && BLOCK
-
-config CD_NO_IDESCSI
-	bool "Support non-SCSI/IDE/ATAPI CDROM drives"
-	---help---
-	  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
-	  here, otherwise N. Read the CD-ROM-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about these CD-ROM drives. If you are unsure what you
-	  have, say Y and find out whether you have one of the following
-	  drives.
-
-	  For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
-	  exists. Especially in cases where you do not know exactly which kind
-	  of drive you have you should read there. Most of these drivers use a
-	  file drivers/cdrom/{driver_name}.h where you can define your
-	  interface parameters and switch some internal goodies.
-
-	  To compile these CD-ROM drivers as a module, choose M instead of Y.
-
-	  If you want to use any of these CD-ROM drivers, you also have to
-	  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
-	  answer will get "defaulted" for you if you enable any of the Linux
-	  CD-ROM drivers).
-
-config AZTCD
-	tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM  CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is your driver if you have an Aztech CDA268-01A, Orchid
-	  CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
-	  CR540 CD-ROM drive.  This driver -- just like all these CD-ROM
-	  drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
-	  as Aztech CDA269-031SE. Please read the file
-	  <file:Documentation/cdrom/aztcd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aztcd.
-
-config GSCD
-	tristate "Goldstar R420 CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  If this is your CD-ROM drive, say Y here.  As described in the file
-	  <file:Documentation/cdrom/gscd>, you might have to change a setting
-	  in the file <file:drivers/cdrom/gscd.h> before compiling the
-	  kernel.  Please read the file <file:Documentation/cdrom/gscd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called gscd.
-
-config SBPCD
-	tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  This driver supports most of the drives which use the Panasonic or
-	  Sound Blaster interface.  Please read the file
-	  <file:Documentation/cdrom/sbpcd>.
-
-	  The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
-	  (sometimes labeled "Creative"), the Creative Labs CD200, the
-	  Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
-	  model), the TEAC CD-55A fall under this category.  Some other
-	  "electrically compatible" drives (Vertos, Genoa, some Funai models)
-	  are currently not supported; for the Sanyo H94A drive currently a
-	  separate driver (asked later) is responsible.  Most drives have a
-	  uniquely shaped faceplate, with a caddyless motorized drawer, but
-	  without external brand markings.  The older CR-52x drives have a
-	  caddy and manual loading/eject, but still no external markings.  The
-	  driver is able to do an extended auto-probing for interface
-	  addresses and drive types; this can help to find facts in cases you
-	  are not sure, but can consume some time during the boot process if
-	  none of the supported drives gets found.  Once your drive got found,
-	  you should enter the reported parameters into
-	  <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
-
-	  This driver can support up to four CD-ROM controller cards, and each
-	  card can support up to four CD-ROM drives; if you say Y here, you
-	  will be asked how many controller cards you have.  If compiled as a
-	  module, only one controller card (but with up to four drives) is
-	  usable.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sbpcd.
-
-config MCDX
-	tristate "Mitsumi CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  Use this driver if you want to be able to use your Mitsumi LU-005,
-	  FX-001 or FX-001D CD-ROM drive.
-
-	  Please read the file <file:Documentation/cdrom/mcdx>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mcdx.
-
-config OPTCD
-	tristate "Optics Storage DOLPHIN 8000AT CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
-	  compatible interface. It also works with the Lasermate CR328A. If
-	  you have one of those, say Y. This driver does not work for the
-	  Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
-	  one. Please read the file <file:Documentation/cdrom/optcd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called optcd.
-
-config CM206
-	tristate "Philips/LMS CM206 CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  If you have a Philips/LMS CD-ROM drive cm206 in combination with a
-	  cm260 host adapter card, say Y here. Please also read the file
-	  <file:Documentation/cdrom/cm206>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cm206.
-
-config SJCD
-	tristate "Sanyo CDR-H94A CDROM support"
-	depends on CD_NO_IDESCSI
-	help
-	  If this is your CD-ROM drive, say Y here and read the file
-	  <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
-	  "ISO 9660 CD-ROM file system support" below, because that's the
-	  file system used on CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sjcd.
-
-config ISP16_CDI
-	tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  These are sound cards with built-in cdrom interfaces using the OPTi
-	  82C928 or 82C929 chips. Say Y here to have them detected and
-	  possibly configured at boot time. In addition, You'll have to say Y
-	  to a driver for the particular cdrom drive you have attached to the
-	  card. Read <file:Documentation/cdrom/isp16> for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called isp16.
-
-config CDU31A
-	tristate "Sony CDU31A/CDU33A CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  These CD-ROM drives have a spring-pop-out caddyless drawer, and a
-	  rectangular green LED centered beneath it.  NOTE: these CD-ROM
-	  drives will not be auto detected by the kernel at boot time; you
-	  have to provide the interface address as an option to the kernel at
-	  boot time as described in <file:Documentation/cdrom/cdu31a> or fill
-	  in your parameters into <file:drivers/cdrom/cdu31a.c>.  Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cdu31a.
-
-config CDU535
-	tristate "Sony CDU535 CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
-	  drives. Please read the file <file:Documentation/cdrom/sonycd535>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sonycd535.
-
-endmenu
diff --git a/drivers/cdrom/Makefile b/drivers/cdrom/Makefile
index d1d1e5a4be7..774c180a4e1 100644
--- a/drivers/cdrom/Makefile
+++ b/drivers/cdrom/Makefile
@@ -10,14 +10,4 @@ obj-$(CONFIG_BLK_DEV_SR)	+=              cdrom.o
 obj-$(CONFIG_PARIDE_PCD)	+=		cdrom.o
 obj-$(CONFIG_CDROM_PKTCDVD)	+=		cdrom.o
 
-obj-$(CONFIG_AZTCD)		+= aztcd.o
-obj-$(CONFIG_CDU31A)		+= cdu31a.o     cdrom.o
-obj-$(CONFIG_CM206)		+= cm206.o      cdrom.o
-obj-$(CONFIG_GSCD)		+= gscd.o
-obj-$(CONFIG_ISP16_CDI)		+= isp16.o
-obj-$(CONFIG_MCDX)		+= mcdx.o       cdrom.o
-obj-$(CONFIG_OPTCD)		+= optcd.o
-obj-$(CONFIG_SBPCD)		+= sbpcd.o      cdrom.o
-obj-$(CONFIG_SJCD)		+= sjcd.o
-obj-$(CONFIG_CDU535)		+= sonycd535.o
 obj-$(CONFIG_VIOCD)		+= viocd.o      cdrom.o
diff --git a/drivers/cdrom/aztcd.c b/drivers/cdrom/aztcd.c
deleted file mode 100644
index d7fbfaae244..00000000000
--- a/drivers/cdrom/aztcd.c
+++ /dev/null
@@ -1,2492 +0,0 @@
-#define AZT_VERSION "2.60"
-
-/*      $Id: aztcd.c,v 2.60 1997/11/29 09:51:19 root Exp root $
-	linux/drivers/block/aztcd.c - Aztech CD268 CDROM driver
-
-	Copyright (C) 1994-98 Werner Zimmermann(Werner.Zimmermann@fht-esslingen.de)
-
-	based on Mitsumi CDROM driver by  Martin Hariss and preworks by
-	Eberhard Moenkeberg; contains contributions by Joe Nardone and Robby 
-	Schirmer.
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2, or (at your option)
-	any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-	HISTORY
-	V0.0    Adaption to Aztech CD268-01A Version 1.3
-		Version is PRE_ALPHA, unresolved points:
-		1. I use busy wait instead of timer wait in STEN_LOW,DTEN_LOW
-		   thus driver causes CPU overhead and is very slow 
-		2. could not find a way to stop the drive, when it is
-		   in data read mode, therefore I had to set
-		   msf.end.min/sec/frame to 0:0:1 (in azt_poll); so only one
-		   frame can be read in sequence, this is also the reason for
-		3. getting 'timeout in state 4' messages, but nevertheless
-		   it works
-		W.Zimmermann, Oct. 31, 1994
-	V0.1    Version is ALPHA, problems #2 and #3 resolved.  
-		W.Zimmermann, Nov. 3, 1994
-	V0.2    Modification to some comments, debugging aids for partial test
-		with Borland C under DOS eliminated. Timer interrupt wait 
-		STEN_LOW_WAIT additionally to busy wait for STEN_LOW implemented; 
-		use it only for the 'slow' commands (ACMD_GET_Q_CHANNEL, ACMD_
-		SEEK_TO_LEAD_IN), all other commands are so 'fast', that busy 
-		waiting seems better to me than interrupt rescheduling.
-		Besides that, when used in the wrong place, STEN_LOW_WAIT causes
-		kernel panic.
-		In function aztPlay command ACMD_PLAY_AUDIO added, should make
-		audio functions work. The Aztech drive needs different commands
-		to read data tracks and play audio tracks.
-		W.Zimmermann, Nov. 8, 1994
-	V0.3    Recognition of missing drive during boot up improved (speeded up).
-		W.Zimmermann, Nov. 13, 1994
-	V0.35   Rewrote the control mechanism in azt_poll (formerly mcd_poll) 
-		including removal of all 'goto' commands. :-); 
-		J. Nardone, Nov. 14, 1994
-	V0.4    Renamed variables and constants to 'azt' instead of 'mcd'; had
-		to make some "compatibility" defines in azt.h; please note,
-		that the source file was renamed to azt.c, the include file to
-		azt.h                
-		Speeded up drive recognition during init (will be a little bit 
-		slower than before if no drive is installed!); suggested by
-		Robby Schirmer.
-		read_count declared volatile and set to AZT_BUF_SIZ to make
-		drive faster (now 300kB/sec, was 60kB/sec before, measured
-		by 'time dd if=/dev/cdrom of=/dev/null bs=2048 count=4096';
-		different AZT_BUF_SIZes were test, above 16 no further im-
-		provement seems to be possible; suggested by E.Moenkeberg.
-		W.Zimmermann, Nov. 18, 1994
-	V0.42   Included getAztStatus command in GetQChannelInfo() to allow
-		reading Q-channel info on audio disks, if drive is stopped, 
-		and some other bug fixes in the audio stuff, suggested by 
-		Robby Schirmer.
-		Added more ioctls (reading data in mode 1 and mode 2).
-		Completely removed the old azt_poll() routine.
-		Detection of ORCHID CDS-3110 in aztcd_init implemented.
-		Additional debugging aids (see the readme file).
-		W.Zimmermann, Dec. 9, 1994  
-	V0.50   Autodetection of drives implemented.
-		W.Zimmermann, Dec. 12, 1994
-	V0.52   Prepared for including in the standard kernel, renamed most
-		variables to contain 'azt', included autoconf.h
-		W.Zimmermann, Dec. 16, 1994        
-	V0.6    Version for being included in the standard Linux kernel.
-		Renamed source and header file to aztcd.c and aztcd.h
-		W.Zimmermann, Dec. 24, 1994
-	V0.7    Changed VERIFY_READ to VERIFY_WRITE in aztcd_ioctl, case
-		CDROMREADMODE1 and CDROMREADMODE2; bug fix in the ioctl,
-		which causes kernel crashes when playing audio, changed 
-		include-files (config.h instead of autoconf.h, removed
-		delay.h)
-		W.Zimmermann, Jan. 8, 1995
-	V0.72   Some more modifications for adaption to the standard kernel.
-		W.Zimmermann, Jan. 16, 1995
-        V0.80   aztcd is now part of the standard kernel since version 1.1.83.
-                Modified the SET_TIMER and CLEAR_TIMER macros to comply with
-                the new timer scheme.
-                W.Zimmermann, Jan. 21, 1995
-        V0.90   Included CDROMVOLCTRL, but with my Aztech drive I can only turn
-                the channels on and off. If it works better with your drive, 
-                please mail me. Also implemented ACMD_CLOSE for CDROMSTART.
-                W.Zimmermann, Jan. 24, 1995
-        V1.00   Implemented close and lock tray commands. Patches supplied by
-		Frank Racis        
-                Added support for loadable MODULEs, so aztcd can now also be
-                loaded by insmod and removed by rmmod during run time
-                Werner Zimmermann, Mar. 24, 95
-        V1.10   Implemented soundcard configuration for Orchid CDS-3110 drives
-                connected to Soundwave32 cards. Release for LST 2.1.
-                (still experimental)
-                Werner Zimmermann, May 8, 95
-        V1.20   Implemented limited support for DOSEMU0.60's cdrom.c. Now it works, but
-                sometimes DOSEMU may hang for 30 seconds or so. A fully functional ver-
-                sion needs an update of Dosemu0.60's cdrom.c, which will come with the 
-                next revision of Dosemu.
-                Also Soundwave32 support now works.
-                Werner Zimmermann, May 22, 95
-	V1.30   Auto-eject feature. Inspired by Franc Racis (racis@psu.edu)
-	        Werner Zimmermann, July 4, 95
-	V1.40   Started multisession support. Implementation copied from mcdx.c
-	        by Heiko Schlittermann. Not tested yet.
-	        Werner Zimmermann, July 15, 95
-        V1.50   Implementation of ioctl CDROMRESET, continued multisession, began
-                XA, but still untested. Heavy modifications to drive status de-
-                tection.
-                Werner Zimmermann, July 25, 95
-        V1.60   XA support now should work. Speeded up drive recognition in cases, 
-                where no drive is installed.
-                Werner Zimmermann, August 8, 1995
-        V1.70   Multisession support now is completed, but there is still not 
-                enough testing done. If you can test it, please contact me. For
-                details please read Documentation/cdrom/aztcd
-                Werner Zimmermann, August 19, 1995
-        V1.80   Modification to suit the new kernel boot procedure introduced
-                with kernel 1.3.33. Will definitely not work with older kernels.
-                Programming done by Linus himself.
-                Werner Zimmermann, October 11, 1995
-	V1.90   Support for Conrad TXC drives, thank's to Jochen Kunz and Olaf Kaluza.
-	        Werner Zimmermann, October 21, 1995
-        V2.00   Changed #include "blk.h" to <linux/blk.h> as the directory
-                structure was changed. README.aztcd is now /usr/src/docu-
-                mentation/cdrom/aztcd
-                Werner Zimmermann, November 10, 95
-        V2.10   Started to modify azt_poll to prevent reading beyond end of
-                tracks.
-                Werner Zimmermann, December 3, 95
-        V2.20   Changed some comments
-                Werner Zimmermann, April 1, 96
-        V2.30   Implemented support for CyCDROM CR520, CR940, Code for CR520 
-        	delivered by H.Berger with preworks by E.Moenkeberg.
-                Werner Zimmermann, April 29, 96
-        V2.40   Reorganized the placement of functions in the source code file
-                to reflect the layered approach; did not actually change code
-                Werner Zimmermann, May 1, 96
-        V2.50   Heiko Eissfeldt suggested to remove some VERIFY_READs in 
-                aztcd_ioctl; check_aztcd_media_change modified 
-                Werner Zimmermann, May 16, 96       
-	V2.60   Implemented Auto-Probing; made changes for kernel's 2.1.xx blocksize
-                Adaption to linux kernel > 2.1.0
-		Werner Zimmermann, Nov 29, 97
-		
-        November 1999 -- Make kernel-parameter implementation work with 2.3.x 
-	                 Removed init_module & cleanup_module in favor of 
-			 module_init & module_exit.
-			 Torben Mathiasen <tmm@image.dk>
-*/
-
-#include <linux/blkdev.h>
-#include "aztcd.h"
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/major.h>
-
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include <asm/uaccess.h>
-
-/*###########################################################################
-  Defines
-  ###########################################################################
-*/
-
-#define MAJOR_NR AZTECH_CDROM_MAJOR
-#define QUEUE (azt_queue)
-#define CURRENT elv_next_request(azt_queue)
-#define SET_TIMER(func, jifs)   delay_timer.expires = jiffies + (jifs); \
-                                delay_timer.function = (void *) (func); \
-                                add_timer(&delay_timer);
-
-#define CLEAR_TIMER             del_timer(&delay_timer);
-
-#define RETURNM(message,value) {printk("aztcd: Warning: %s failed\n",message);\
-                                return value;}
-#define RETURN(message)        {printk("aztcd: Warning: %s failed\n",message);\
-                                return;}
-
-/* Macros to switch the IDE-interface to the slave device and back to the master*/
-#define SWITCH_IDE_SLAVE  outb_p(0xa0,azt_port+6); \
-	                  outb_p(0x10,azt_port+6); \
-	                  outb_p(0x00,azt_port+7); \
-	                  outb_p(0x10,azt_port+6);
-#define SWITCH_IDE_MASTER outb_p(0xa0,azt_port+6);
-
-
-#if 0
-#define AZT_TEST
-#define AZT_TEST1		/* <int-..> */
-#define AZT_TEST2		/* do_aztcd_request */
-#define AZT_TEST3		/* AZT_S_state */
-#define AZT_TEST4		/* QUICK_LOOP-counter */
-#define AZT_TEST5		/* port(1) state */
-#define AZT_DEBUG
-#define AZT_DEBUG_MULTISESSION
-#endif
-
-static struct request_queue *azt_queue;
-
-static int current_valid(void)
-{
-        return CURRENT &&
-		rq_data_dir(CURRENT) == READ &&
-		CURRENT->sector != -1;
-}
-
-#define AFL_STATUSorDATA (AFL_STATUS | AFL_DATA)
-#define AZT_BUF_SIZ 16
-
-#define READ_TIMEOUT 3000
-
-#define azt_port aztcd		/*needed for the modutils */
-
-/*##########################################################################
-  Type Definitions
-  ##########################################################################
-*/
-enum azt_state_e { AZT_S_IDLE,	/* 0 */
-	AZT_S_START,		/* 1 */
-	AZT_S_MODE,		/* 2 */
-	AZT_S_READ,		/* 3 */
-	AZT_S_DATA,		/* 4 */
-	AZT_S_STOP,		/* 5 */
-	AZT_S_STOPPING		/* 6 */
-};
-enum azt_read_modes { AZT_MODE_0,	/*read mode for audio disks, not supported by Aztech firmware */
-	AZT_MODE_1,		/*read mode for normal CD-ROMs */
-	AZT_MODE_2		/*read mode for XA CD-ROMs */
-};
-
-/*##########################################################################
-  Global Variables
-  ##########################################################################
-*/
-static int aztPresent = 0;
-
-static volatile int azt_transfer_is_active = 0;
-
-static char azt_buf[CD_FRAMESIZE_RAW * AZT_BUF_SIZ];	/*buffer for block size conversion */
-#if AZT_PRIVATE_IOCTLS
-static char buf[CD_FRAMESIZE_RAW];	/*separate buffer for the ioctls */
-#endif
-
-static volatile int azt_buf_bn[AZT_BUF_SIZ], azt_next_bn;
-static volatile int azt_buf_in, azt_buf_out = -1;
-static volatile int azt_error = 0;
-static int azt_open_count = 0;
-static volatile enum azt_state_e azt_state = AZT_S_IDLE;
-#ifdef AZT_TEST3
-static volatile enum azt_state_e azt_state_old = AZT_S_STOP;
-static volatile int azt_st_old = 0;
-#endif
-static volatile enum azt_read_modes azt_read_mode = AZT_MODE_1;
-
-static int azt_mode = -1;
-static volatile int azt_read_count = 1;
-
-static int azt_port = AZT_BASE_ADDR;
-
-module_param(azt_port, int, 0);
-
-static int azt_port_auto[16] = AZT_BASE_AUTO;
-
-static char azt_cont = 0;
-static char azt_init_end = 0;
-static char azt_auto_eject = AZT_AUTO_EJECT;
-
-static int AztTimeout, AztTries;
-static DECLARE_WAIT_QUEUE_HEAD(azt_waitq);
-static DEFINE_TIMER(delay_timer, NULL, 0, 0);
-
-static struct azt_DiskInfo DiskInfo;
-static struct azt_Toc Toc[MAX_TRACKS];
-static struct azt_Play_msf azt_Play;
-
-static int aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-static char aztDiskChanged = 1;
-static char aztTocUpToDate = 0;
-
-static unsigned char aztIndatum;
-static unsigned long aztTimeOutCount;
-static int aztCmd = 0;
-
-static DEFINE_SPINLOCK(aztSpin);
-
-/*###########################################################################
-   Function Prototypes
-  ###########################################################################
-*/
-/* CDROM Drive Low Level I/O Functions */
-static void aztStatTimer(void);
-
-/* CDROM Drive Command Functions */
-static int aztGetDiskInfo(void);
-#if AZT_MULTISESSION
-static int aztGetMultiDiskInfo(void);
-#endif
-static int aztGetToc(int multi);
-
-/* Kernel Interface Functions */
-static int check_aztcd_media_change(struct gendisk *disk);
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
-		       unsigned long arg);
-static int aztcd_open(struct inode *ip, struct file *fp);
-static int aztcd_release(struct inode *inode, struct file *file);
-
-static struct block_device_operations azt_fops = {
-	.owner		= THIS_MODULE,
-	.open		= aztcd_open,
-	.release	= aztcd_release,
-	.ioctl		= aztcd_ioctl,
-	.media_changed	= check_aztcd_media_change,
-};
-
-/* Aztcd State Machine: Controls Drive Operating State */
-static void azt_poll(void);
-
-/* Miscellaneous support functions */
-static void azt_hsg2msf(long hsg, struct msf *msf);
-static long azt_msf2hsg(struct msf *mp);
-static void azt_bin2bcd(unsigned char *p);
-static int azt_bcd2bin(unsigned char bcd);
-
-/*##########################################################################
-  CDROM Drive Low Level I/O Functions
-  ##########################################################################
-*/
-/* Macros for the drive hardware interface handshake, these macros use
-   busy waiting */
-/* Wait for OP_OK = drive answers with AFL_OP_OK after receiving a command*/
-# define OP_OK op_ok()
-static void op_ok(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(DATA_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait OP_OK\n");
-			break;
-		}
-	} while (aztIndatum != AFL_OP_OK);
-}
-
-/* Wait for PA_OK = drive answers with AFL_PA_OK after receiving parameters*/
-#if 0
-# define PA_OK pa_ok()
-static void pa_ok(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(DATA_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait PA_OK\n");
-			break;
-		}
-	} while (aztIndatum != AFL_PA_OK);
-}
-#endif
-
-/* Wait for STEN=Low = handshake signal 'AFL_.._OK available or command executed*/
-# define STEN_LOW  sten_low()
-static void sten_low(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(STATUS_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			if (azt_init_end)
-				printk
-				    ("aztcd: Error Wait STEN_LOW commands:%x\n",
-				     aztCmd);
-			break;
-		}
-	} while (aztIndatum & AFL_STATUS);
-}
-
-/* Wait for DTEN=Low = handshake signal 'Data available'*/
-# define DTEN_LOW dten_low()
-static void dten_low(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(STATUS_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait DTEN_OK\n");
-			break;
-		}
-	} while (aztIndatum & AFL_DATA);
-}
-
-/* 
- * Macro for timer wait on STEN=Low, should only be used for 'slow' commands;
- * may cause kernel panic when used in the wrong place
-*/
-#define STEN_LOW_WAIT   statusAzt()
-static void statusAzt(void)
-{
-	AztTimeout = AZT_STATUS_DELAY;
-	SET_TIMER(aztStatTimer, HZ / 100);
-	sleep_on(&azt_waitq);
-	if (AztTimeout <= 0)
-		printk("aztcd: Error Wait STEN_LOW_WAIT command:%x\n",
-		       aztCmd);
-	return;
-}
-
-static void aztStatTimer(void)
-{
-	if (!(inb(STATUS_PORT) & AFL_STATUS)) {
-		wake_up(&azt_waitq);
-		return;
-	}
-	AztTimeout--;
-	if (AztTimeout <= 0) {
-		wake_up(&azt_waitq);
-		printk("aztcd: Error aztStatTimer: Timeout\n");
-		return;
-	}
-	SET_TIMER(aztStatTimer, HZ / 100);
-}
-
-/*##########################################################################
-  CDROM Drive Command Functions
-  ##########################################################################
-*/
-/* 
- * Send a single command, return -1 on error, else 0
-*/
-static int aztSendCmd(int cmd)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: Executing command %x\n", cmd);
-#endif
-
-	if ((azt_port == 0x1f0) || (azt_port == 0x170))
-		SWITCH_IDE_SLAVE;	/*switch IDE interface to slave configuration */
-
-	aztCmd = cmd;
-	outb(POLLED, MODE_PORT);
-	do {
-		if (inb(STATUS_PORT) & AFL_STATUS)
-			break;
-		inb(DATA_PORT);	/* if status left from last command, read and */
-	} while (1);		/* discard it */
-	do {
-		if (inb(STATUS_PORT) & AFL_DATA)
-			break;
-		inb(DATA_PORT);	/* if data left from last command, read and */
-	} while (1);		/* discard it */
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		outb((unsigned char) cmd, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_OP_OK) {
-			return 0;
-		}		/*OP_OK? */
-		if (data == AFL_OP_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk
-			    ("### Error 1 aztcd: aztSendCmd %x  Error Code %x\n",
-			     cmd, data);
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: aztSendCmd %x \n", cmd);
-		azt_error = 0xA5;
-	}
-	RETURNM("aztSendCmd", -1);
-}
-
-/*
- * Send a play or read command to the drive, return -1 on error, else 0
-*/
-static int sendAztCmd(int cmd, struct azt_Play_msf *params)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: play start=%02x:%02x:%02x  end=%02x:%02x:%02x\n",
-	       params->start.min, params->start.sec, params->start.frame,
-	       params->end.min, params->end.sec, params->end.frame);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(cmd);
-		outb(params->start.min, CMD_PORT);
-		outb(params->start.sec, CMD_PORT);
-		outb(params->start.frame, CMD_PORT);
-		outb(params->end.min, CMD_PORT);
-		outb(params->end.sec, CMD_PORT);
-		outb(params->end.frame, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_PA_OK) {
-			return 0;
-		}		/*PA_OK ? */
-		if (data == AFL_PA_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk
-			    ("### Error 1 aztcd: sendAztCmd %x  Error Code %x\n",
-			     cmd, data);
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: sendAztCmd %x\n ", cmd);
-		azt_error = 0xA5;
-	}
-	RETURNM("sendAztCmd", -1);
-}
-
-/*
- * Send a seek command to the drive, return -1 on error, else 0
-*/
-static int aztSeek(struct azt_Play_msf *params)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: aztSeek %02x:%02x:%02x\n",
-	       params->start.min, params->start.sec, params->start.frame);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(ACMD_SEEK);
-		outb(params->start.min, CMD_PORT);
-		outb(params->start.sec, CMD_PORT);
-		outb(params->start.frame, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_PA_OK) {
-			return 0;
-		}		/*PA_OK ? */
-		if (data == AFL_PA_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk("### Error 1 aztcd: aztSeek\n");
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: aztSeek\n ");
-		azt_error = 0xA5;
-	}
-	RETURNM("aztSeek", -1);
-}
-
-/* Send a Set Disk Type command
-   does not seem to work with Aztech drives, behavior is completely indepen-
-   dent on which mode is set ???
-*/
-static int aztSetDiskType(int type)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: set disk type command: type= %i\n", type);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(ACMD_SET_DISK_TYPE);
-		outb(type, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);