Remove legacy CDROM drivers

They are all broken beyond repair. Given that nobody has complained
about them (most haven't worked in 2.6 AT ALL), remove them from the
tree.

A new mitsumi driver that actually works is in progress, it'll get
added when completed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 0 insertions, 839 deletions

diff --git a/drivers/cdrom/sbpcd.h b/drivers/cdrom/sbpcd.h
deleted file mode 100644
index 2f2225f13c6..00000000000
--- a/drivers/cdrom/sbpcd.h
+++ /dev/null
@@ -1,839 +0,0 @@
-/*
- * sbpcd.h   Specify interface address and interface type here.
- */
-
-/*
- * Attention! This file contains user-serviceable parts!
- * I recommend to make use of it...
- * If you feel helpless, look into Documentation/cdrom/sbpcd
- * (good idea anyway, at least before mailing me).
- *
- * The definitions for the first controller can get overridden by
- * the kernel command line ("lilo boot option").
- * Examples:
- *                                 sbpcd=0x300,LaserMate
- *                             or
- *                                 sbpcd=0x230,SoundBlaster
- *                             or
- *                                 sbpcd=0x338,SoundScape
- *                             or
- *                                 sbpcd=0x2C0,Teac16bit
- *
- * If sbpcd gets used as a module, you can load it with
- *     insmod sbpcd.o sbpcd=0x300,0
- * or
- *     insmod sbpcd.o sbpcd=0x230,1
- * or
- *     insmod sbpcd.o sbpcd=0x338,2
- * or
- *     insmod sbpcd.o sbpcd=0x2C0,3
- * respective to override the configured address and type.
- */
-
-/*
- * define your CDROM port base address as CDROM_PORT
- * and specify the type of your interface card as SBPRO.
- *
- * address:
- * ========
- * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
- * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
- * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
- * specify the REAL address here, not the configuration port address. Look
- * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
- * sbpcd auto-probe, if you are not firm with the address.
- * There are some soundcards on the market with 0x0630, 0x0650, ...; their
- * type is not obvious (both types are possible).
- *
- * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
- *          if your soundcard has its CDROM port above 0x300, specify
- *          that address and try SBPRO 0 first.
- *          if your SoundScape configuration port is at 0x330, specify
- *          0x338 and SBPRO 2.
- *
- * interface type:
- * ===============
- * set SBPRO to 1 for "true" SoundBlaster card
- * set SBPRO to 0 for "compatible" soundcards and
- *                for "poor" (no sound) interface cards.
- * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
- * set SBPRO to 3 for Teac 16bit interface cards
- *
- * Almost all "compatible" sound boards need to set SBPRO to 0.
- * If SBPRO is set wrong, the drives will get found - but any
- * data access will give errors (audio access will work).
- * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
- * interface cards need SBPRO 1.
- *
- * sound base:
- * ===========
- * The SOUND_BASE definition tells if we should try to turn the CD sound
- * channels on. It will only be of use regarding soundcards with a SbPro
- * compatible mixer.
- *
- * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
- *          #define SOUND_BASE 0     leaves the soundcard untouched
- */
-#define CDROM_PORT 0x340 /* <-----------<< port address                      */
-#define SBPRO      0     /* <-----------<< interface type                    */
-#define MAX_DRIVES 4     /* set to 1 if the card does not use "drive select" */
-#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0   */
-
-/*
- * some more or less user dependent definitions - service them!
- */
-
-/* Set this to 0 once you have configured your interface definitions right. */
-#define DISTRIBUTION 1
-
-/*
- * Time to wait after giving a message.
- * This gets important if you enable non-standard DBG_xxx flags.
- * You will see what happens if you omit the pause or make it
- * too short. Be warned!
- */
-#define KLOGD_PAUSE 1
-
-/* tray control: eject tray if no disk is in */
-#if DISTRIBUTION
-#define JUKEBOX 0
-#else
-#define JUKEBOX 1
-#endif /* DISTRIBUTION */
-
-/* tray control: eject tray after last use */
-#if DISTRIBUTION
-#define EJECT 0
-#else
-#define EJECT 1
-#endif /* DISTRIBUTION */
-
-/* max. number of audio frames to read with one     */
-/* request (allocates n* 2352 bytes kernel memory!) */
-/* may be freely adjusted, f.e. 75 (= 1 sec.), at   */
-/* runtime by use of the CDROMAUDIOBUFSIZ ioctl.    */
-#define READ_AUDIO 0
-
-/* Optimizations for the Teac CD-55A drive read performance.
- * SBP_TEAC_SPEED can be changed here, or one can set the 
- * variable "teac" when loading as a module.
- * Valid settings are:
- *   0 - very slow - the recommended "DISTRIBUTION 1" setup.
- *   1 - 2x performance with little overhead. No busy waiting.
- *   2 - 4x performance with 5ms overhead per read. Busy wait.
- *
- * Setting SBP_TEAC_SPEED or the variable 'teac' to anything
- * other than 0 may cause problems. If you run into them, first
- * change SBP_TEAC_SPEED back to 0 and see if your drive responds
- * normally. If yes, you are "allowed" to report your case - to help
- * me with the driver, not to solve your hassle. Donīt mail if you
- * simply are stuck into your own "tuning" experiments, you know?
- */
-#define SBP_TEAC_SPEED 1
-
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * nothing to change below here if you are not fully aware what you're doing
- */
-#ifndef _LINUX_SBPCD_H
-
-#define _LINUX_SBPCD_H
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * driver's own read_ahead, data mode
- */
-#define SBP_BUFFER_FRAMES 8 
-
-#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
-#undef  FUTURE
-#undef SAFE_MIXED
-
-#define TEST_UPC 0
-#define SPEA_TEST 0
-#define TEST_STI 0
-#define OLD_BUSY 0
-#undef PATH_CHECK
-#ifndef SOUND_BASE
-#define SOUND_BASE 0
-#endif
-#if DISTRIBUTION
-#undef SBP_TEAC_SPEED
-#define SBP_TEAC_SPEED 0
-#endif
-/*==========================================================================*/
-/*
- * DDI interface definitions
- * "invented" by Fred N. van Kempen..
- */
-#define DDIOCSDBG	0x9000
-
-/*==========================================================================*/
-/*
- * "private" IOCTL functions
- */
-#define CDROMAUDIOBUFSIZ	0x5382 /* set the audio buffer size */
-
-/*==========================================================================*/
-/*
- * Debug output levels
- */
-#define DBG_INF	1	/* necessary information */
-#define DBG_BSZ	2	/* BLOCK_SIZE trace */
-#define DBG_REA	3	/* READ status trace */
-#define DBG_CHK	4	/* MEDIA CHECK trace */
-#define DBG_TIM	5	/* datarate timer test */
-#define DBG_INI	6	/* initialization trace */
-#define DBG_TOC	7	/* tell TocEntry values */
-#define DBG_IOC	8	/* ioctl trace */
-#define DBG_STA	9	/* ResponseStatus() trace */
-#define DBG_ERR	10	/* cc_ReadError() trace */
-#define DBG_CMD	11	/* cmd_out() trace */
-#define DBG_WRN	12	/* give explanation before auto-probing */
-#define DBG_MUL	13	/* multi session code test */
-#define DBG_IDX	14	/* test code for drive_id !=0 */
-#define DBG_IOX	15	/* some special information */
-#define DBG_DID	16	/* drive ID test */
-#define DBG_RES	17	/* drive reset info */
-#define DBG_SPI	18	/* SpinUp test */
-#define DBG_IOS	19	/* ioctl trace: subchannel functions */
-#define DBG_IO2	20	/* ioctl trace: general */
-#define DBG_UPC	21	/* show UPC information */
-#define DBG_XA1	22	/* XA mode debugging */
-#define DBG_LCK	23	/* door (un)lock info */
-#define DBG_SQ1	24	/* dump SubQ frame */
-#define DBG_AUD	25	/* READ AUDIO debugging */
-#define DBG_SEQ	26	/* Sequoia interface configuration trace */
-#define DBG_LCS	27	/* Longshine LCS-7260 debugging trace */
-#define DBG_CD2	28	/* MKE/Funai CD200 debugging trace */
-#define DBG_TEA	29	/* TEAC CD-55A debugging trace */
-#define DBG_ECS	30	/* ECS-AT (Vertos 100) debugging trace */
-#define DBG_000	31	/* unnecessary information */
-
-/*==========================================================================*/
-/*==========================================================================*/
-
-/*
- * bits of flags_cmd_out:
- */
-#define f_respo3		0x100
-#define f_putcmd		0x80
-#define f_respo2		0x40
-#define f_lopsta		0x20
-#define f_getsta		0x10
-#define f_ResponseStatus	0x08
-#define f_obey_p_check		0x04
-#define f_bit1			0x02
-#define f_wait_if_busy		0x01
-
-/*
- * diskstate_flags:
- */
-#define x80_bit			0x80
-#define upc_bit			0x40
-#define volume_bit		0x20
-#define toc_bit			0x10
-#define multisession_bit	0x08
-#define cd_size_bit		0x04
-#define subq_bit		0x02
-#define frame_size_bit		0x01
-
-/*
- * disk states (bits of diskstate_flags):
- */
-#define upc_valid		(current_drive->diskstate_flags&upc_bit)
-#define volume_valid		(current_drive->diskstate_flags&volume_bit)
-#define toc_valid		(current_drive->diskstate_flags&toc_bit)
-#define cd_size_valid		(current_drive->diskstate_flags&cd_size_bit)
-#define subq_valid		(current_drive->diskstate_flags&subq_bit)
-#define frame_size_valid	(current_drive->diskstate_flags&frame_size_bit)
-
-/*
- * the status_bits variable
- */
-#define p_success	0x100
-#define p_door_closed	0x80
-#define p_caddy_in	0x40
-#define p_spinning	0x20
-#define p_check		0x10
-#define p_busy_new	0x08
-#define p_door_locked	0x04
-#define p_disk_ok	0x01
-
-/*
- * LCS-7260 special status result bits:
- */
-#define p_lcs_door_locked	0x02
-#define p_lcs_door_closed	0x01 /* probably disk_in */
-
-/*
- * CR-52x special status result bits:
- */
-#define p_caddin_old	0x40
-#define p_success_old	0x08
-#define p_busy_old	0x04
-#define p_bit_1		0x02	/* hopefully unused now */
-
-/*
- * "generation specific" defs of the status result bits:
- */
-#define p0_door_closed	0x80
-#define p0_caddy_in	0x40
-#define p0_spinning	0x20
-#define p0_check	0x10
-#define p0_success	0x08 /* unused */
-#define p0_busy		0x04
-#define p0_bit_1	0x02 /* unused */
-#define p0_disk_ok	0x01
-
-#define pL_disk_in	0x40
-#define pL_spinning	0x20
-#define pL_check	0x10
-#define pL_success	0x08 /* unused ?? */
-#define pL_busy		0x04
-#define pL_door_locked	0x02
-#define pL_door_closed	0x01
-
-#define pV_door_closed	0x40
-#define pV_spinning	0x20
-#define pV_check	0x10
-#define pV_success	0x08
-#define pV_busy		0x04
-#define pV_door_locked	0x02
-#define pV_disk_ok	0x01
-
-#define p1_door_closed	0x80
-#define p1_disk_in	0x40
-#define p1_spinning	0x20
-#define p1_check	0x10
-#define p1_busy		0x08
-#define p1_door_locked	0x04
-#define p1_bit_1	0x02 /* unused */
-#define p1_disk_ok	0x01
-
-#define p2_disk_ok	0x80
-#define p2_door_locked	0x40
-#define p2_spinning	0x20
-#define p2_busy2	0x10
-#define p2_busy1	0x08
-#define p2_door_closed	0x04
-#define p2_disk_in	0x02
-#define p2_check	0x01
-
-/*
- * used drive states:
- */
-#define st_door_closed	(current_drive->status_bits&p_door_closed)
-#define st_caddy_in	(current_drive->status_bits&p_caddy_in)
-#define st_spinning	(current_drive->status_bits&p_spinning)
-#define st_check	(current_drive->status_bits&p_check)
-#define st_busy		(current_drive->status_bits&p_busy_new)
-#define st_door_locked	(current_drive->status_bits&p_door_locked)
-#define st_diskok	(current_drive->status_bits&p_disk_ok)
-
-/*
- * bits of the CDi_status register:
- */
-#define s_not_result_ready	0x04 /* 0: "result ready" */
-#define s_not_data_ready	0x02 /* 0: "data ready"   */
-#define s_attention		0x01 /* 1: "attention required" */
-/*
- * usable as:
- */
-#define DRV_ATTN	((inb(CDi_status)&s_attention)!=0)
-#define DATA_READY	((inb(CDi_status)&s_not_data_ready)==0)
-#define RESULT_READY	((inb(CDi_status)&s_not_result_ready)==0)
-
-/*
- * drive families and types (firmware versions):
- */
-#define drv_fam0	0x0100		/* CR-52x family */
-#define drv_199		(drv_fam0+0x01)	/* <200 */
-#define drv_200		(drv_fam0+0x02)	/* <201 */
-#define drv_201		(drv_fam0+0x03)	/* <210 */
-#define drv_210		(drv_fam0+0x04)	/* <211 */
-#define drv_211		(drv_fam0+0x05)	/* <300 */
-#define drv_300		(drv_fam0+0x06)	/* >=300 */
-
-#define drv_fam1	0x0200		/* CR-56x family */
-#define drv_099		(drv_fam1+0x01)	/* <100 */
-#define drv_100		(drv_fam1+0x02)	/* >=100, only 1.02 and 5.00 known */
-
-#define drv_fam2	0x0400		/* CD200 family */
-
-#define drv_famT	0x0800		/* TEAC CD-55A */
-
-#define drv_famL	0x1000		/* Longshine family */
-#define drv_260		(drv_famL+0x01)	/* LCS-7260 */
-#define drv_e1		(drv_famL+0x01)	/* LCS-7260, firmware "A E1" */
-#define drv_f4		(drv_famL+0x02)	/* LCS-7260, firmware "A4F4" */
-
-#define drv_famV	0x2000		/* ECS-AT (vertos-100) family */
-#define drv_at		(drv_famV+0x01)	/* ECS-AT, firmware "1.00" */
-
-#define fam0_drive	(current_drive->drv_type&drv_fam0)
-#define famL_drive	(current_drive->drv_type&drv_famL)
-#define famV_drive	(current_drive->drv_type&drv_famV)
-#define fam1_drive	(current_drive->drv_type&drv_fam1)
-#define fam2_drive	(current_drive->drv_type&drv_fam2)
-#define famT_drive	(current_drive->drv_type&drv_famT)
-#define fam0L_drive	(current_drive->drv_type&(drv_fam0|drv_famL))
-#define fam0V_drive	(current_drive->drv_type&(drv_fam0|drv_famV))
-#define famLV_drive	(current_drive->drv_type&(drv_famL|drv_famV))
-#define fam0LV_drive	(current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
-#define fam1L_drive	(current_drive->drv_type&(drv_fam1|drv_famL))
-#define fam1V_drive	(current_drive->drv_type&(drv_fam1|drv_famV))
-#define fam1LV_drive	(current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
-#define fam01_drive	(current_drive->drv_type&(drv_fam0|drv_fam1))
-#define fam12_drive	(current_drive->drv_type&(drv_fam1|drv_fam2))
-#define fam2T_drive	(current_drive->drv_type&(drv_fam2|drv_famT))
-
-/*
- * audio states:
- */
-#define audio_completed	3 /* Forgot this one! --AJK */
-#define audio_playing	2
-#define audio_pausing	1
-
-/*
- * drv_pattern, drv_options:
- */
-#define speed_auto	0x80
-#define speed_300	0x40
-#define speed_150	0x20
-#define audio_mono	0x04
-
-/*
- * values of cmd_type (0 else):
- */
-#define READ_M1	0x01	/* "data mode 1": 2048 bytes per frame */
-#define READ_M2	0x02	/* "data mode 2": 12+2048+280 bytes per frame */
-#define READ_SC	0x04	/* "subchannel info": 96 bytes per frame */
-#define READ_AU	0x08	/* "audio frame": 2352 bytes per frame */
-
-/*
- * sense_byte:
- *
- *          values: 00
- *                  01
- *                  81
- *                  82 "raw audio" mode
- *                  xx from infobuf[0] after 85 00 00 00 00 00 00
- */
-
-/* audio status (bin) */
-#define aud_00 0x00 /* Audio status byte not supported or not valid */
-#define audx11 0x0b /* Audio play operation in progress             */
-#define audx12 0x0c /* Audio play operation paused                  */
-#define audx13 0x0d /* Audio play operation successfully completed  */
-#define audx14 0x0e /* Audio play operation stopped due to error    */
-#define audx15 0x0f /* No current audio status to return            */
-/* audio status (bcd) */
-#define aud_11 0x11 /* Audio play operation in progress             */
-#define aud_12 0x12 /* Audio play operation paused                  */
-#define aud_13 0x13 /* Audio play operation successfully completed  */
-#define aud_14 0x14 /* Audio play operation stopped due to error    */
-#define aud_15 0x15 /* No current audio status to return            */
-
-/*
- * highest allowed drive number (MINOR+1)
- */
-#define NR_SBPCD	4
-
-/*
- * we try to never disable interrupts - seems to work
- */
-#define SBPCD_DIS_IRQ	0
-
-/*
- * "write byte to port"
- */
-#define OUT(x,y)	outb(y,x)
-
-/*==========================================================================*/
-
-#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
-#define MIXER_data SOUND_BASE+5 /* sound card's data register */
-#define MIXER_CD_Volume	0x28	/* internal SB Pro register address */
-
-/*==========================================================================*/
-
-#define MAX_TRACKS	99
-
-#define ERR_DISKCHANGE 615
-
-/*==========================================================================*/
-/*
- * To make conversions easier (machine dependent!)
- */
-typedef union _msf
-{
-	u_int n;
-	u_char c[4];
-} MSF;
-
-typedef union _blk
-{
-	u_int n;
-	u_char c[4];
-} BLK;
-
-/*==========================================================================*/
-
-/*============================================================================
-==============================================================================
-
-COMMAND SET of "old" drives like CR-521, CR-522
-               (the CR-562 family is different):
-
-No.	Command			       Code
---------------------------------------------
-
-Drive Commands:
- 1	Seek				01	
- 2	Read Data			02
- 3	Read XA-Data			03
- 4	Read Header			04
- 5	Spin Up				05
- 6	Spin Down			06
- 7	Diagnostic			07
- 8	Read UPC			08
- 9	Read ISRC			09
-10	Play Audio			0A
-11	Play Audio MSF			0B
-12	Play Audio Track/Index		0C
-
-Status Commands:
-13	Read Status			81	
-14	Read Error			82
-15	Read Drive Version		83
-16	Mode Select			84
-17	Mode Sense			85
-18	Set XA Parameter		86
-19	Read XA Parameter		87
-20	Read Capacity			88
-21	Read SUB_Q			89
-22	Read Disc Code			8A
-23	Read Disc Information		8B
-24	Read TOC			8C
-25	Pause/Resume			8D
-26	Read Packet			8E
-27	Read Path Check			00
- 
- 
-all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
-
-mnemo     7-byte command        #bytes response (r0...rn)
-________ ____________________  ____ 
-
-Read Status:
-status:  81.                    (1)  one-byte command, gives the main
-                                                          status byte
-Read Error:
-check1:  82 00 00 00 00 00 00.  (6)  r1: audio status
-
-Read Packet:
-check2:  8e xx 00 00 00 00 00. (xx)  gets xx bytes response, relating
-                                        to commands 01 04 05 07 08 09
-
-Play Audio:
-play:    0a ll-bb-aa nn-nn-nn.  (0)  play audio, ll-bb-aa: starting block (lba),
-                                                 nn-nn-nn: #blocks
-Play Audio MSF:
-         0b mm-ss-ff mm-ss-ff   (0)  play audio from/to
-
-Play Audio Track/Index:
-         0c ...
-
-Pause/Resume:
-pause:   8d pr 00 00 00 00 00.  (0)  pause (pr=00) 
-                                     resume (pr=80) audio playing
-
-Mode Select:
-         84 00 nn-nn ??.?? 00   (0)  nn-nn: 2048 or 2340
-                                     possibly defines transfer size
-
-set_vol: 84 83 00 00 sw le 00.  (0)  sw(itch): lrxxxxxx (off=1)
-                                     le(vel): min=0, max=FF, else half
-				     (firmware 2.11)
-
-Mode Sense:
-get_vol: 85 03 00 00 00 00 00.  (2)  tell current audio volume setting
-
-Read Disc Information:
-tocdesc: 8b 00 00 00 00 00 00.  (6)  read the toc descriptor ("msf-bin"-format)
-
-Read TOC:
-tocent:  8c fl nn 00 00 00 00.  (8)  read toc entry #nn
-                                       (fl=0:"lba"-, =2:"msf-bin"-format)
-
-Read Capacity:
-capacit: 88 00 00 00 00 00 00.  (5)  "read CD-ROM capacity"
-
-
-Read Path Check:
-ping:    00 00 00 00 00 00 00.  (2)  r0=AA, r1=55
-                                     ("ping" if the drive is connected)
-
-Read Drive Version:
-ident:   83 00 00 00 00 00 00. (12)  gives "MATSHITAn.nn" 
-                                     (n.nn = 2.01, 2.11., 3.00, ...)
-
-Seek:
-seek:    01 00 ll-bb-aa 00 00.  (0)  
-seek:    01 02 mm-ss-ff 00 00.  (0)  
-
-Read Data:
-read:    02 xx-xx-xx nn-nn fl.  (?)  read nn-nn blocks of 2048 bytes,
-                                     starting at block xx-xx-xx  
-                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read XA-Data:
-read:    03 xx-xx-xx nn-nn fl.  (?)  read nn-nn blocks of 2340 bytes, 
-                                     starting at block xx-xx-xx
-                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read SUB_Q:
-         89 fl 00 00 00 00 00. (13)  r0: audio status, r4-r7: lba/msf, 
-                                       fl=0: "lba", fl=2: "msf"
-
-Read Disc Code:
-         8a 00 00 00 00 00 00. (14)  possibly extended "check condition"-info
-
-Read Header:
-         04 00 ll-bb-aa 00 00.  (0)   4 bytes response with "check2"
-         04 02 mm-ss-ff 00 00.  (0)   4 bytes response with "check2"
-
-Spin Up:
-         05 00 ll-bb-aa 00 00.  (0)  possibly implies a "seek"
-
-Spin Down:
-         06 ...
-
-Diagnostic:
-         07 00 ll-bb-aa 00 00.  (2)   2 bytes response with "check2"
-         07 02 mm-ss-ff 00 00.  (2)   2 bytes response with "check2"
-
-Read UPC:
-         08 00 ll-bb-aa 00 00. (16)  
-         08 02 mm-ss-ff 00 00. (16)  
-
-Read ISRC:
-         09 00 ll-bb-aa 00 00. (15)  15 bytes response with "check2"
-         09 02 mm-ss-ff 00 00. (15)  15 bytes response with "check2"
-
-Set XA Parameter:
-         86 ...
-
-Read XA Parameter:
-         87 ...
-
-==============================================================================
-============================================================================*/
-
-/*
- * commands
- *
- * CR-52x:      CMD0_
- * CR-56x:      CMD1_
- * CD200:       CMD2_
- * LCS-7260:    CMDL_
- * TEAC CD-55A: CMDT_
- * ECS-AT:      CMDV_
- */
-#define CMD1_RESET	0x0a
-#define CMD2_RESET	0x01
-#define CMDT_RESET	0xc0
-
-#define CMD1_LOCK_CTL	0x0c
-#define CMD2_LOCK_CTL	0x1e
-#define CMDT_LOCK_CTL	CMD2_LOCK_CTL
-#define CMDL_LOCK_CTL	0x0e
-#define CMDV_LOCK_CTL	CMDL_LOCK_CTL
-
-#define CMD1_TRAY_CTL	0x07
-#define CMD2_TRAY_CTL	0x1b
-#define CMDT_TRAY_CTL	CMD2_TRAY_CTL
-#define CMDL_TRAY_CTL	0x0d
-#define CMDV_TRAY_CTL	CMDL_TRAY_CTL
-
-#define CMD1_MULTISESS	0x8d
-#define CMDL_MULTISESS	0x8c
-#define CMDV_MULTISESS	CMDL_MULTISESS
-
-#define CMD1_SUBCHANINF	0x11
-#define CMD2_SUBCHANINF	0x??
-
-#define CMD1_ABORT	0x08
-#define CMD2_ABORT	0x08
-#define CMDT_ABORT	0x08
-
-#define CMD2_x02	0x02
-
-#define CMD2_SETSPEED	0xda
-
-#define CMD0_PATH_CHECK	0x00
-#define CMD1_PATH_CHECK	0x???
-#define CMD2_PATH_CHECK	0x???
-#define CMDT_PATH_CHECK	0x???
-#define CMDL_PATH_CHECK	CMD0_PATH_CHECK
-#define CMDV_PATH_CHECK	CMD0_PATH_CHECK
-
-#define CMD0_SEEK	0x01
-#define CMD1_SEEK	CMD0_SEEK
-#define CMD2_SEEK	0x2b
-#define CMDT_SEEK	CMD2_SEEK
-#define CMDL_SEEK	CMD0_SEEK
-#define CMDV_SEEK	CMD0_SEEK
-
-#define CMD0_READ	0x02
-#define CMD1_READ	0x10
-#define CMD2_READ	0x28
-#define CMDT_READ	CMD2_READ
-#define CMDL_READ	CMD0_READ
-#define CMDV_READ	CMD0_READ
-
-#define CMD0_READ_XA	0x03
-#define CMD2_READ_XA	0xd4
-#define CMD2_READ_XA2	0xd5
-#define CMDL_READ_XA	CMD0_READ_XA /* really ?? */
-#define CMDV_READ_XA	CMD0_READ_XA
-
-#define CMD0_READ_HEAD	0x04
-
-#define CMD0_SPINUP	0x05
-#define CMD1_SPINUP	0x02
-#define CMD2_SPINUP	CMD2_TRAY_CTL
-#define CMDL_SPINUP	CMD0_SPINUP
-#define CMDV_SPINUP	CMD0_SPINUP
-
-#define CMD0_SPINDOWN	0x06 /* really??? */
-#define CMD1_SPINDOWN	0x06
-#define CMD2_SPINDOWN	CMD2_TRAY_CTL
-#define CMDL_SPINDOWN	0x0d
-#define CMDV_SPINDOWN	CMD0_SPINDOWN
-
-#define CMD0_DIAG	0x07
-
-#define CMD0_READ_UPC	0x08
-#define CMD1_READ_UPC	0x88
-#define CMD2_READ_UPC	0x???
-#define CMDL_READ_UPC	CMD0_READ_UPC
-#define CMDV_READ_UPC	0x8f
-
-#define CMD0_READ_ISRC	0x09
-
-#define CMD0_PLAY	0x0a
-#define CMD1_PLAY	0x???
-#define CMD2_PLAY	0x???
-#define CMDL_PLAY	CMD0_PLAY
-#define CMDV_PLAY	CMD0_PLAY
-
-#define CMD0_PLAY_MSF	0x0b
-#define CMD1_PLAY_MSF	0x0e
-#define CMD2_PLAY_MSF	0x47
-#define CMDT_PLAY_MSF	CMD2_PLAY_MSF
-#define CMDL_PLAY_MSF	0x???
-
-#define CMD0_PLAY_TI	0x0c
-#define CMD1_PLAY_TI	0x0f
-
-#define CMD0_STATUS	0x81
-#define CMD1_STATUS	0x05
-#define CMD2_STATUS	0x00
-#define CMDT_STATUS	CMD2_STATUS
-#define CMDL_STATUS	CMD0_STATUS
-#define CMDV_STATUS	CMD0_STATUS
-#define CMD2_SEEK_LEADIN 0x00
-
-#define CMD0_READ_ERR	0x82
-#define CMD1_READ_ERR	CMD0_READ_ERR
-#define CMD2_READ_ERR	0x03
-#define CMDT_READ_ERR	CMD2_READ_ERR /* get audio status */
-#define CMDL_READ_ERR	CMD0_READ_ERR
-#define CMDV_READ_ERR	CMD0_READ_ERR
-
-#define CMD0_READ_VER	0x83
-#define CMD1_READ_VER	CMD0_READ_VER
-#define CMD2_READ_VER	0x12
-#define CMDT_READ_VER	CMD2_READ_VER /* really ?? */
-#define CMDL_READ_VER	CMD0_READ_VER
-#define CMDV_READ_VER	CMD0_READ_VER
-
-#define CMD0_SETMODE	0x84
-#define CMD1_SETMODE	0x09
-#define CMD2_SETMODE	0x55
-#define CMDT_SETMODE	CMD2_SETMODE
-#define CMDL_SETMODE	CMD0_SETMODE
-
-#define CMD0_GETMODE	0x85
-#define CMD1_GETMODE	0x84
-#define CMD2_GETMODE	0x5a
-#define CMDT_GETMODE	CMD2_GETMODE
-#define CMDL_GETMODE	CMD0_GETMODE
-
-#define CMD0_SET_XA	0x86
-
-#define CMD0_GET_XA	0x87
-
-#define CMD0_CAPACITY	0x88
-#define CMD1_CAPACITY	0x85
-#define CMD2_CAPACITY	0x25
-#define CMDL_CAPACITY	CMD0_CAPACITY /* missing in some firmware versions */
-
-#define CMD0_READSUBQ	0x89
-#define CMD1_READSUBQ	0x87
-#define CMD2_READSUBQ	0x42
-#define CMDT_READSUBQ	CMD2_READSUBQ
-#define CMDL_READSUBQ	CMD0_READSUBQ
-#define CMDV_READSUBQ	CMD0_READSUBQ
-
-#define CMD0_DISKCODE	0x8a
-
-#define CMD0_DISKINFO	0x8b
-#define CMD1_DISKINFO	CMD0_DISKINFO
-#define CMD2_DISKINFO	0x43
-#define CMDT_DISKINFO	CMD2_DISKINFO
-#define CMDL_DISKINFO	CMD0_DISKINFO
-#define CMDV_DISKINFO	CMD0_DISKINFO
-
-#define CMD0_READTOC	0x8c
-#define CMD1_READTOC	CMD0_READTOC
-#define CMD2_READTOC	0x???
-#define CMDL_READTOC	CMD0_READTOC
-#define CMDV_READTOC	CMD0_READTOC
-
-#define CMD0_PAU_RES	0x8d
-#define CMD1_PAU_RES	0x0d
-#define CMD2_PAU_RES	0x4b
-#define CMDT_PAUSE	CMD2_PAU_RES
-#define CMDL_PAU_RES	CMD0_PAU_RES
-#define CMDV_PAUSE	CMD0_PAU_RES
-
-#define CMD0_PACKET	0x8e
-#define CMD1_PACKET	CMD0_PACKET
-#define CMD2_PACKET	0x???
-#define CMDL_PACKET	CMD0_PACKET
-#define CMDV_PACKET	0x???
-
-/*==========================================================================*/
-/*==========================================================================*/
-#endif /* _LINUX_SBPCD_H */
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file. 
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */