Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 135 insertions, 0 deletions

diff --git a/drivers/block/xd.h b/drivers/block/xd.h
new file mode 100644
index 00000000000..71ac2e3dffc
--- /dev/null
+++ b/drivers/block/xd.h
@@ -0,0 +1,135 @@
+#ifndef _LINUX_XD_H
+#define _LINUX_XD_H
+
+/*
+ * This file contains the definitions for the IO ports and errors etc. for XT hard disk controllers (at least the DTC 5150X).
+ *
+ * Author: Pat Mackinlay, pat@it.com.au
+ * Date: 29/09/92
+ *
+ * Revised: 01/01/93, ...
+ *
+ * Ref: DTC 5150X Controller Specification (thanks to Kevin Fowler, kevinf@agora.rain.com)
+ * Also thanks to: Salvador Abreu, Dave Thaler, Risto Kankkunen and Wim Van Dorst.
+ */
+
+#include <linux/interrupt.h>
+
+/* XT hard disk controller registers */
+#define XD_DATA		(xd_iobase + 0x00)	/* data RW register */
+#define XD_RESET	(xd_iobase + 0x01)	/* reset WO register */
+#define XD_STATUS	(xd_iobase + 0x01)	/* status RO register */
+#define XD_SELECT	(xd_iobase + 0x02)	/* select WO register */
+#define XD_JUMPER	(xd_iobase + 0x02)	/* jumper RO register */
+#define XD_CONTROL	(xd_iobase + 0x03)	/* DMAE/INTE WO register */
+#define XD_RESERVED	(xd_iobase + 0x03)	/* reserved */
+
+/* XT hard disk controller commands (incomplete list) */
+#define CMD_TESTREADY	0x00	/* test drive ready */
+#define CMD_RECALIBRATE	0x01	/* recalibrate drive */
+#define CMD_SENSE	0x03	/* request sense */
+#define CMD_FORMATDRV	0x04	/* format drive */
+#define CMD_VERIFY	0x05	/* read verify */
+#define CMD_FORMATTRK	0x06	/* format track */
+#define CMD_FORMATBAD	0x07	/* format bad track */
+#define CMD_READ	0x08	/* read */
+#define CMD_WRITE	0x0A	/* write */
+#define CMD_SEEK	0x0B	/* seek */
+
+/* Controller specific commands */
+#define CMD_DTCSETPARAM	0x0C	/* set drive parameters (DTC 5150X & CX only?) */
+#define CMD_DTCGETECC	0x0D	/* get ecc error length (DTC 5150X only?) */
+#define CMD_DTCREADBUF	0x0E	/* read sector buffer (DTC 5150X only?) */
+#define CMD_DTCWRITEBUF 0x0F	/* write sector buffer (DTC 5150X only?) */
+#define CMD_DTCREMAPTRK	0x11	/* assign alternate track (DTC 5150X only?) */
+#define CMD_DTCGETPARAM	0xFB	/* get drive parameters (DTC 5150X only?) */
+#define CMD_DTCSETSTEP	0xFC	/* set step rate (DTC 5150X only?) */
+#define CMD_DTCSETGEOM	0xFE	/* set geometry data (DTC 5150X only?) */
+#define CMD_DTCGETGEOM	0xFF	/* get geometry data (DTC 5150X only?) */
+#define CMD_ST11GETGEOM 0xF8	/* get geometry data (Seagate ST11R/M only?) */
+#define CMD_WDSETPARAM	0x0C	/* set drive parameters (WD 1004A27X only?) */
+#define CMD_XBSETPARAM	0x0C	/* set drive parameters (XEBEC only?) */
+
+/* Bits for command status byte */
+#define CSB_ERROR	0x02	/* error */
+#define CSB_LUN		0x20	/* logical Unit Number */
+
+/* XT hard disk controller status bits */
+#define STAT_READY	0x01	/* controller is ready */
+#define STAT_INPUT	0x02	/* data flowing from controller to host */
+#define STAT_COMMAND	0x04	/* controller in command phase */
+#define STAT_SELECT	0x08	/* controller is selected */
+#define STAT_REQUEST	0x10	/* controller requesting data */
+#define STAT_INTERRUPT	0x20	/* controller requesting interrupt */
+
+/* XT hard disk controller control bits */
+#define PIO_MODE	0x00	/* control bits to set for PIO */
+#define DMA_MODE	0x03	/* control bits to set for DMA & interrupt */
+
+#define XD_MAXDRIVES	2	/* maximum 2 drives */
+#define XD_TIMEOUT	HZ	/* 1 second timeout */
+#define XD_RETRIES	4	/* maximum 4 retries */
+
+#undef DEBUG			/* define for debugging output */
+
+#ifdef DEBUG
+	#define DEBUG_STARTUP	/* debug driver initialisation */
+	#define DEBUG_OVERRIDE	/* debug override geometry detection */
+	#define DEBUG_READWRITE	/* debug each read/write command */
+	#define DEBUG_OTHER	/* debug misc. interrupt/DMA stuff */
+	#define DEBUG_COMMAND	/* debug each controller command */
+#endif /* DEBUG */
+
+/* this structure defines the XT drives and their types */
+typedef struct {
+	u_char heads;
+	u_short cylinders;
+	u_char sectors;
+	u_char control;
+	int unit;
+} XD_INFO;
+
+/* this structure defines a ROM BIOS signature */
+typedef struct {
+	unsigned int offset;
+	const char *string;
+	void (*init_controller)(unsigned int address);
+	void (*init_drive)(u_char drive);
+	const char *name;
+} XD_SIGNATURE;
+
+#ifndef MODULE
+static int xd_manual_geo_init (char *command);
+#endif /* MODULE */
+static u_char xd_detect (u_char *controller, unsigned int *address);
+static u_char xd_initdrives (void (*init_drive)(u_char drive));
+
+static void do_xd_request (request_queue_t * q);
+static int xd_ioctl (struct inode *inode,struct file *file,unsigned int cmd,unsigned long arg);
+static int xd_readwrite (u_char operation,XD_INFO *disk,char *buffer,u_int block,u_int count);
+static void xd_recalibrate (u_char drive);
+
+static irqreturn_t xd_interrupt_handler(int irq, void *dev_id,
+					struct pt_regs *regs);
+static u_char xd_setup_dma (u_char opcode,u_char *buffer,u_int count);
+static u_char *xd_build (u_char *cmdblk,u_char command,u_char drive,u_char head,u_short cylinder,u_char sector,u_char count,u_char control);
+static void xd_watchdog (unsigned long unused);
+static inline u_char xd_waitport (u_short port,u_char flags,u_char mask,u_long timeout);
+static u_int xd_command (u_char *command,u_char mode,u_char *indata,u_char *outdata,u_char *sense,u_long timeout);
+
+/* card specific setup and geometry gathering code */
+static void xd_dtc_init_controller (unsigned int address);
+static void xd_dtc5150cx_init_drive (u_char drive);
+static void xd_dtc_init_drive (u_char drive);
+static void xd_wd_init_controller (unsigned int address);
+static void xd_wd_init_drive (u_char drive);
+static void xd_seagate_init_controller (unsigned int address);
+static void xd_seagate_init_drive (u_char drive);
+static void xd_omti_init_controller (unsigned int address);
+static void xd_omti_init_drive (u_char drive);
+static void xd_xebec_init_controller (unsigned int address);
+static void xd_xebec_init_drive (u_char drive);
+static void xd_setparam (u_char command,u_char drive,u_char heads,u_short cylinders,u_short rwrite,u_short wprecomp,u_char ecc);
+static void xd_override_init_drive (u_char drive);
+
+#endif /* _LINUX_XD_H */