Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 87 insertions, 0 deletions

diff --git a/drivers/block/ida_ioctl.h b/drivers/block/ida_ioctl.h
new file mode 100644
index 00000000000..888fff9caed
--- /dev/null
+++ b/drivers/block/ida_ioctl.h
@@ -0,0 +1,87 @@
+/*
+ *    Disk Array driver for Compaq SMART2 Controllers
+ *    Copyright 1998 Compaq Computer Corporation
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ */
+#ifndef IDA_IOCTL_H
+#define IDA_IOCTL_H
+
+#include "ida_cmd.h"
+#include "cpqarray.h"
+
+#define IDAGETDRVINFO		0x27272828
+#define IDAPASSTHRU		0x28282929
+#define IDAGETCTLRSIG		0x29293030
+#define IDAREVALIDATEVOLS	0x30303131
+#define IDADRIVERVERSION	0x31313232
+#define IDAGETPCIINFO		0x32323333
+
+typedef struct _ida_pci_info_struct
+{
+	unsigned char 	bus;
+	unsigned char 	dev_fn;
+	__u32 		board_id;
+} ida_pci_info_struct;
+/*
+ * Normally, the ioctl determines the logical unit for this command by
+ * the major,minor number of the fd passed to ioctl.  If you need to send
+ * a command to a different/nonexistant unit (such as during config), you
+ * can override the normal behavior by setting the unit valid bit. (Normally,
+ * it should be zero) The controller the command is sent to is still
+ * determined by the major number of the open device.
+ */
+
+#define UNITVALID	0x80
+typedef struct {
+	__u8	cmd;
+	__u8	rcode;
+	__u8	unit;
+	__u32	blk;
+	__u16	blk_cnt;
+
+/* currently, sg_cnt is assumed to be 1: only the 0th element of sg is used */
+	struct {
+		void	__user *addr;
+		size_t	size;
+	} sg[SG_MAX];
+	int	sg_cnt;
+
+	union ctlr_cmds {
+		drv_info_t		drv;
+		unsigned char		buf[1024];
+
+		id_ctlr_t		id_ctlr;
+		drv_param_t		drv_param;
+		id_log_drv_t		id_log_drv;
+		id_log_drv_ext_t	id_log_drv_ext;
+		sense_log_drv_stat_t	sense_log_drv_stat;
+		id_phys_drv_t		id_phys_drv;
+		blink_drv_leds_t	blink_drv_leds;
+		sense_blink_leds_t	sense_blink_leds;
+		config_t		config;
+		reorder_log_drv_t	reorder_log_drv;
+		label_log_drv_t		label_log_drv;
+		surf_delay_t		surf_delay;
+		overhead_delay_t	overhead_delay;
+		mp_delay_t		mp_delay;
+		scsi_param_t		scsi_param;
+	} c;
+} ida_ioctl_t;
+
+#endif /* IDA_IOCTL_H */