aboutsummaryrefslogtreecommitdiff
path: root/drivers/bcma/sprom.c
diff options
context:
space:
mode:
authorArend van Spriel <arend@broadcom.com>2012-03-06 15:50:48 +0100
committerJohn W. Linville <linville@tuxdriver.com>2012-03-06 15:16:18 -0500
commit10d8493cd9efd38b1947b7a74276dbdc8311aa1a (patch)
tree69caa6570a2582667783dd03c8ce5c204881f398 /drivers/bcma/sprom.c
parent4ac887cfdad909f16ee1886fe4fa19b452fc7fd3 (diff)
bcma: add support for on-chip OTP memory used for SPROM storage
Wireless Broadcom chips can have either their SPROM data stored on either external SPROM or on-chip OTP memory. Both are accessed through the same register space. This patch adds support for the on-chip OTP memory. Tested with: BCM43224 OTP and SPROM BCM4331 SPROM BCM4313 OTP This patch is in response to linux-wireless thread [1]. [1] http://article.gmane.org/gmane.linux.kernel.wireless.general/85426 Tested-by: Saul St. John <saul.stjohn@gmail.com> Tested-by: Rafal Milecki <zajec5@gmail.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/bcma/sprom.c')
-rw-r--r--drivers/bcma/sprom.c126
1 files changed, 106 insertions, 20 deletions
diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
index fba8066857d..cdcf75c0954 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -300,37 +300,128 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
SSB_SROM8_FEM_ANTSWLUT_SHIFT);
}
-static bool bcma_is_sprom_available(struct bcma_bus *bus)
+/*
+ * Indicates the presence of external SPROM.
+ */
+static bool bcma_sprom_ext_available(struct bcma_bus *bus)
{
- u32 sromctrl;
+ u32 chip_status;
+ u32 srom_control;
+ u32 present_mask;
- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
- return false;
+ if (bus->drv_cc.core->id.rev >= 31) {
+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
+ return false;
- if (bus->drv_cc.core->id.rev >= 32) {
- sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL);
- return sromctrl & BCMA_CC_SROM_CONTROL_PRESENT;
+ srom_control = bcma_read32(bus->drv_cc.core,
+ BCMA_CC_SROM_CONTROL);
+ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT;
}
- return true;
+
+ /* older chipcommon revisions use chip status register */
+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT;
+ break;
+
+ case 0x4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
+
+ default:
+ return true;
+ }
+
+ return chip_status & present_mask;
+}
+
+/*
+ * Indicates that on-chip OTP memory is present and enabled.
+ */
+static bool bcma_sprom_onchip_available(struct bcma_bus *bus)
+{
+ u32 chip_status;
+ u32 otpsize = 0;
+ bool present;
+
+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT);
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT;
+ break;
+
+ case 0x4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+
+ case 43224:
+ case 43225:
+ /* for these chips OTP is always available */
+ present = true;
+ break;
+
+ default:
+ present = false;
+ break;
+ }
+
+ if (present) {
+ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS;
+ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT;
+ }
+
+ return otpsize != 0;
+}
+
+/*
+ * Verify OTP is filled and determine the byte
+ * offset where SPROM data is located.
+ *
+ * On error, returns 0; byte offset otherwise.
+ */
+static int bcma_sprom_onchip_offset(struct bcma_bus *bus)
+{
+ struct bcma_device *cc = bus->drv_cc.core;
+ u32 offset;
+
+ /* verify OTP status */
+ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0)
+ return 0;
+
+ /* obtain bit offset from otplayout register */
+ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET);
+ return BCMA_CC_SPROM + (offset >> 3);
}
int bcma_sprom_get(struct bcma_bus *bus)
{
- u16 offset;
+ u16 offset = BCMA_CC_SPROM;
u16 *sprom;
int err = 0;
if (!bus->drv_cc.core)
return -EOPNOTSUPP;
- if (!bcma_is_sprom_available(bus)) {
+ if (!bcma_sprom_ext_available(bus)) {
/*
- * Maybe there is no SPROM on the device?
- * Now we ask the arch code if there is some sprom
- * available for this device in some other storage.
+ * External SPROM takes precedence so check
+ * on-chip OTP only when no external SPROM
+ * is present.
*/
- err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
- return err;
+ if (bcma_sprom_onchip_available(bus)) {
+ /* determine offset */
+ offset = bcma_sprom_onchip_offset(bus);
+ }
+ if (!offset) {
+ /*
+ * Maybe there is no SPROM on the device?
+ * Now we ask the arch code if there is some sprom
+ * available for this device in some other storage.
+ */
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+ return err;
+ }
}
sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
@@ -341,11 +432,6 @@ int bcma_sprom_get(struct bcma_bus *bus)
if (bus->chipinfo.id == 0x4331)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
- /* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
- * According to brcm80211 this applies to cards with PCIe rev >= 6
- * TODO: understand this condition and use it */
- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
- BCMA_CC_SPROM_PCIE6;
pr_debug("SPROM offset 0x%x\n", offset);
bcma_sprom_read(bus, offset, sprom);