firmware: convert Ambassador ATM driver to request_firmware()

Since it had various regions to be loaded to separate addresses, and it
wanted to do them in fairly small chunks anyway, switch it to use the
new ihex code. Encode the start address in the first record.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>

1 files changed, 57 insertions, 83 deletions

diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index 6adb72a2f87..703364b5217 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -34,6 +34,8 @@
 #include <linux/poison.h>
 #include <linux/bitrev.h>
 #include <linux/mutex.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>
 
 #include <asm/atomic.h>
 #include <asm/io.h>
@@ -290,29 +292,6 @@ static inline void __init show_version (void) {
   
 */
 
-/********** microcode **********/
-
-#ifdef AMB_NEW_MICROCODE
-#define UCODE(x) UCODE2(atmsar12.x)
-#else
-#define UCODE(x) UCODE2(atmsar11.x)
-#endif
-#define UCODE2(x) #x
-
-static u32 __devinitdata ucode_start =
-#include UCODE(start)
-;
-
-static region __devinitdata ucode_regions[] = {
-#include UCODE(regions)
-  { 0, 0 }
-};
-
-static u32 __devinitdata ucode_data[] = {
-#include UCODE(data)
-  0xdeadbeef
-};
-
 static void do_housekeeping (unsigned long arg);
 /********** globals **********/
 
@@ -1841,45 +1820,34 @@ static int __devinit get_loader_version (loader_block * lb,
 
 /* loader: write memory data blocks */
 
-static int __devinit loader_write (loader_block * lb,
-				const amb_dev * dev, const u32 * data,
-				u32 address, unsigned int count) {
-  unsigned int i;
+static int __devinit loader_write (loader_block* lb,
+				   const amb_dev *dev,
+				   const struct ihex_binrec *rec) {
   transfer_block * tb = &lb->payload.transfer;
   
   PRINTD (DBG_FLOW|DBG_LOAD, "loader_write");
-  
-  if (count > MAX_TRANSFER_DATA)
-    return -EINVAL;
-  tb->address = cpu_to_be32 (address);
-  tb->count = cpu_to_be32 (count);
-  for (i = 0; i < count; ++i)
-    tb->data[i] = cpu_to_be32 (data[i]);
+
+  tb->address = rec->addr;
+  tb->count = cpu_to_be32(be16_to_cpu(rec->len) / 4);
+  memcpy(tb->data, rec->data, be16_to_cpu(rec->len));
   return do_loader_command (lb, dev, write_adapter_memory);
 }
 
 /* loader: verify memory data blocks */
 
 static int __devinit loader_verify (loader_block * lb,
-				 const amb_dev * dev, const u32 * data,
-				 u32 address, unsigned int count) {
-  unsigned int i;
+				    const amb_dev *dev,
+				    const struct ihex_binrec *rec) {
   transfer_block * tb = &lb->payload.transfer;
   int res;
   
   PRINTD (DBG_FLOW|DBG_LOAD, "loader_verify");
   
-  if (count > MAX_TRANSFER_DATA)
-    return -EINVAL;
-  tb->address = cpu_to_be32 (address);
-  tb->count = cpu_to_be32 (count);
+  tb->address = rec->addr;
+  tb->count = cpu_to_be32(be16_to_cpu(rec->len) / 4);
   res = do_loader_command (lb, dev, read_adapter_memory);
-  if (!res)
-    for (i = 0; i < count; ++i)
-      if (tb->data[i] != cpu_to_be32 (data[i])) {
-	res = -EINVAL;
-	break;
-      }
+  if (!res && memcmp(tb->data, rec->data, be16_to_cpu(rec->len)))
+    res = -EINVAL;
   return res;
 }
 
@@ -1962,47 +1930,53 @@ static int amb_reset (amb_dev * dev, int diags) {
 /********** transfer and start the microcode **********/
 
 static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
-  unsigned int i = 0;
-  unsigned int total = 0;
-  const u32 * pointer = ucode_data;
-  u32 address;
-  unsigned int count;
+  const struct firmware *fw;
+  unsigned long start_address;
+  const struct ihex_binrec *rec;
   int res;
   
+  res = request_ihex_firmware(&fw, "atmsar11.fw", &dev->pci_dev->dev);
+  if (res) {
+    PRINTK (KERN_ERR, "Cannot load microcode data");
+    return res;
+  }
+
+  /* First record contains just the start address */
+  rec = (const struct ihex_binrec *)fw->data;
+  if (be16_to_cpu(rec->len) != sizeof(__be32) || be32_to_cpu(rec->addr)) {
+    PRINTK (KERN_ERR, "Bad microcode data (no start record)");
+    return -EINVAL;
+  }
+  start_address = be32_to_cpup((__be32 *)rec->data);
+
+  rec = ihex_next_binrec(rec);
+
   PRINTD (DBG_FLOW|DBG_LOAD, "ucode_init");
-  
-  while (address = ucode_regions[i].start,
-	 count = ucode_regions[i].count) {
-    PRINTD (DBG_LOAD, "starting region (%x, %u)", address, count);
-    while (count) {
-      unsigned int words;
-      if (count <= MAX_TRANSFER_DATA)
-	words = count;
-      else
-	words = MAX_TRANSFER_DATA;
-      total += words;
-      res = loader_write (lb, dev, pointer, address, words);
-      if (res)
-	return res;
-      res = loader_verify (lb, dev, pointer, address, words);
-      if (res)
-	return res;
-      count -= words;
-      address += sizeof(u32) * words;
-      pointer += words;
+
+  while (rec) {
+    PRINTD (DBG_LOAD, "starting region (%x, %u)", be32_to_cpu(rec->addr),
+	    be16_to_cpu(rec->len));
+    if (be16_to_cpu(rec->len) > 4 * MAX_TRANSFER_DATA) {
+	    PRINTK (KERN_ERR, "Bad microcode data (record too long)");
+	    return -EINVAL;
     }
-    i += 1;
-  }
-  if (*pointer == ATM_POISON) {
-    return loader_start (lb, dev, ucode_start);
-  } else {
-    // cast needed as there is no %? for pointer differnces
-    PRINTD (DBG_LOAD|DBG_ERR,
-	    "offset=%li, *pointer=%x, address=%x, total=%u",
-	    (long) (pointer - ucode_data), *pointer, address, total);
-    PRINTK (KERN_ERR, "incorrect microcode data");
-    return -ENOMEM;
+    if (be16_to_cpu(rec->len) & 3) {
+	    PRINTK (KERN_ERR, "Bad microcode data (odd number of bytes)");
+	    return -EINVAL;
+    }
+    res = loader_write(lb, dev, rec);
+    if (res)
+      break;
+
+    res = loader_verify(lb, dev, rec);
+    if (res)
+      break;
   }
+  release_firmware(fw);
+  if (!res)
+    res = loader_start(lb, dev, start_address);
+
+  return res;
 }
 
 /********** give adapter parameters **********/