Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata updates from Jeff Garzik:

1) apply, and then revert, the sysfs export of ATA host controller
   number.  Discussion was continuing after patch application, trying to
   figure out how to best mesh exported data with the installers,
   boot-time agents and other parties that want this info.

2) Merge Zero-Power Optical Device Driver (ZPODD) support, bringing the
   wonderfulness of sane power management to your CD/DVD device.

   Includes one SCSI-subsystem patch (with appropriate ACKs), adding
   runtime PM support to 'sr' driver.  That is the ZPODD interaction
   bits.

   Patchset went through some 13 revisions before it got here; kudos to
   Intel for persistence.

3) pata_samsung_cf: use devm_clk_get()

4) more ata_piix, ahci PCI IDs

5) Add SATA driver for R-Car SoC

6) Convert libata to use devm_ioremap_resource (Note: I think Greg sent
   this to you, also)

7) Set proper Sense Key (SK) in the SCSI simulator when ATA passthrough
   indicates check condition.  Google and specification hawks everywhere
   shall rejoice.

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (22 commits)
  [libata] fix smatch warning for zpodd_wake_dev
  [libata] Set proper SK when CK_COND is set.
  [libata] Convert to devm_ioremap_resource()
  libata: add R-Car SATA driver
  ahci: Add Device IDs for Intel Wellsburg PCH
  ata_piix: Add Device IDs for Intel Wellsburg PCH
  [SCSI] remove can_power_off flag from scsi_device
  [libata] scsi: no poll when ODD is powered off
  [SCSI] sr: support runtime pm
  ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs
  ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
  [libata] PM code cleanup for ata port
  [libata] pm: differentiate system and runtime pm for ata port
  Revert "libata: export host controller number thru /sys"
  libata: do not suspend port if normal ODD is attached
  libata: expose pm qos flags for ata device
  libata: handle power transition of ODD
  libata: check zero power ready status for ZPODD
  libata: move acpi notification code to zpodd
  libata: identify and init ZPODD devices
  ...

12 files changed, 1460 insertions, 134 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4cfb7200260..3e751b74615 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -58,6 +58,19 @@ config ATA_ACPI
 	  You can disable this at kernel boot time by using the
 	  option libata.noacpi=1
 
+config SATA_ZPODD
+	bool "SATA Zero Power ODD Support"
+	depends on ATA_ACPI
+	default n
+	help
+	  This option adds support for SATA ZPODD. It requires both
+	  ODD and the platform support, and if enabled, will automatically
+	  power on/off the ODD when certain condition is satisfied. This
+	  does not impact user's experience of the ODD, only power is saved
+	  when ODD is not in use(i.e. no disc inside).
+
+	  If unsure, say N.
+
 config SATA_PMP
 	bool "SATA Port Multiplier support"
 	default y
@@ -247,6 +260,14 @@ config SATA_PROMISE
 
 	  If unsure, say N.
 
+config SATA_RCAR
+	tristate "Renesas R-Car SATA support"
+	depends on ARCH_SHMOBILE && ARCH_R8A7779
+	help
+	  This option enables support for Renesas R-Car Serial ATA.
+
+	  If unsure, say N.
+
 config SATA_SIL
 	tristate "Silicon Image SATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 9329dafba91..c04d0fd038a 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_ATA_PIIX)		+= ata_piix.o
 obj-$(CONFIG_SATA_MV)		+= sata_mv.o
 obj-$(CONFIG_SATA_NV)		+= sata_nv.o
 obj-$(CONFIG_SATA_PROMISE)	+= sata_promise.o
+obj-$(CONFIG_SATA_RCAR)		+= sata_rcar.o
 obj-$(CONFIG_SATA_SIL)		+= sata_sil.o
 obj-$(CONFIG_SATA_SIS)		+= sata_sis.o
 obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
@@ -107,3 +108,4 @@ libata-y	:= libata-core.o libata-scsi.o libata-eh.o libata-transport.o
 libata-$(CONFIG_ATA_SFF)	+= libata-sff.o
 libata-$(CONFIG_SATA_PMP)	+= libata-pmp.o
 libata-$(CONFIG_ATA_ACPI)	+= libata-acpi.o
+libata-$(CONFIG_SATA_ZPODD)	+= libata-zpodd.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 495aeed2677..a99112cfd8b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -265,6 +265,30 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f22), board_ahci }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f23), board_ahci }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f24), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f25), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f26), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f27), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f2e), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f2f), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f32), board_ahci }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f33), board_ahci }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f34), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f35), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f36), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */
+	{ PCI_VDEVICE(INTEL, 0x8d04), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x8d06), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x8d0e), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x8d62), board_ahci }, /* Wellsburg AHCI */
+	{ PCI_VDEVICE(INTEL, 0x8d64), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x8d66), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x8d6e), board_ahci }, /* Wellsburg RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 174eca609b4..d2ba439cfe5 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -317,6 +317,23 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (DH89xxCC) */
 	{ 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Avoton) */
+	{ 0x8086, 0x1f20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+	/* SATA Controller IDE (Avoton) */
+	{ 0x8086, 0x1f21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+	/* SATA Controller IDE (Avoton) */
+	{ 0x8086, 0x1f30, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Avoton) */
+	{ 0x8086, 0x1f31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Wellsburg) */
+	{ 0x8086, 0x8d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+	/* SATA Controller IDE (Wellsburg) */
+	{ 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Wellsburg) */
+	{ 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+	/* SATA Controller IDE (Wellsburg) */
+	{ 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+
 	{ }	/* terminate list */
 };
 
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 6fc67f7efb2..0ea1018280b 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -17,6 +17,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_qos.h>
 #include <scsi/scsi_device.h>
 #include "libata.h"
 
@@ -835,50 +836,95 @@ void ata_acpi_on_resume(struct ata_port *ap)
 	}
 }
 
-/**
- * ata_acpi_set_state - set the port power state
- * @ap: target ATA port
- * @state: state, on/off
- *
- * This function executes the _PS0/_PS3 ACPI method to set the power state.
- * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
- */
-void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
+static int ata_acpi_choose_suspend_state(struct ata_device *dev, bool runtime)
+{
+	int d_max_in = ACPI_STATE_D3_COLD;
+	if (!runtime)
+		goto out;
+
+	/*
+	 * For ATAPI, runtime D3 cold is only allowed
+	 * for ZPODD in zero power ready state
+	 */
+	if (dev->class == ATA_DEV_ATAPI &&
+	    !(zpodd_dev_enabled(dev) && zpodd_zpready(dev)))
+		d_max_in = ACPI_STATE_D3_HOT;
+
+out:
+	return acpi_pm_device_sleep_state(&dev->sdev->sdev_gendev,
+					  NULL, d_max_in);
+}
+
+static void sata_acpi_set_state(struct ata_port *ap, pm_message_t state)
 {
+	bool runtime = PMSG_IS_AUTO(state);
 	struct ata_device *dev;
 	acpi_handle handle;
 	int acpi_state;
 
-	/* channel first and then drives for power on and vica versa
-	   for power off */
-	handle = ata_ap_acpi_handle(ap);
-	if (handle && state.event == PM_EVENT_ON)
-		acpi_bus_set_power(handle, ACPI_STATE_D0);
-
 	ata_for_each_dev(dev, &ap->link, ENABLED) {
 		handle = ata_dev_acpi_handle(dev);
 		if (!handle)
 			continue;
 
-		if (state.event != PM_EVENT_ON) {
-			acpi_state = acpi_pm_device_sleep_state(
-				&dev->sdev->sdev_gendev, NULL, ACPI_STATE_D3);
-			if (acpi_state > 0)
-				acpi_bus_set_power(handle, acpi_state);
-			/* TBD: need to check if it's runtime pm request */
-			acpi_pm_device_run_wake(
-				&dev->sdev->sdev_gendev, true);
+		if (!(state.event & PM_EVENT_RESUME)) {
+			acpi_state = ata_acpi_choose_suspend_state(dev, runtime);
+			if (acpi_state == ACPI_STATE_D0)
+				continue;
+			if (runtime && zpodd_dev_enabled(dev) &&
+			    acpi_state == ACPI_STATE_D3_COLD)
+				zpodd_enable_run_wake(dev);
+			acpi_bus_set_power(handle, acpi_state);
 		} else {
-			/* Ditto */
-			acpi_pm_device_run_wake(
-				&dev->sdev->sdev_gendev, false);
+			if (runtime && zpodd_dev_enabled(dev))
+				zpodd_disable_run_wake(dev);
 			acpi_bus_set_power(handle, ACPI_STATE_D0);
 		}
 	}
+}
 
-	handle = ata_ap_acpi_handle(ap);
-	if (handle && state.event != PM_EVENT_ON)
-		acpi_bus_set_power(handle, ACPI_STATE_D3);
+/* ACPI spec requires _PS0 when IDE power on and _PS3 when power off */
+static void pata_acpi_set_state(struct ata_port *ap, pm_message_t state)
+{
+	struct ata_device *dev;
+	acpi_handle port_handle;
+
+	port_handle = ata_ap_acpi_handle(ap);
+	if (!port_handle)
+		return;
+
+	/* channel first and then drives for power on and vica versa
+	   for power off */
+	if (state.event & PM_EVENT_RESUME)
+		acpi_bus_set_power(port_handle, ACPI_STATE_D0);
+
+	ata_for_each_dev(dev, &ap->link, ENABLED) {
+		acpi_handle dev_handle = ata_dev_acpi_handle(dev);
+		if (!dev_handle)
+			continue;
+
+		acpi_bus_set_power(dev_handle, state.event & PM_EVENT_RESUME ?
+						ACPI_STATE_D0 : ACPI_STATE_D3);
+	}
+
+	if (!(state.event & PM_EVENT_RESUME))
+		acpi_bus_set_power(port_handle, ACPI_STATE_D3);
+}
+
+/**
+ * ata_acpi_set_state - set the port power state
+ * @ap: target ATA port
+ * @state: state, on/off
+ *
+ * This function sets a proper ACPI D state for the device on
+ * system and runtime PM operations.
+ */
+void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
+{
+	if (ap->flags & ATA_FLAG_ACPI_SATA)
+		sata_acpi_set_state(ap, state);
+	else
+		pata_acpi_set_state(ap, state);
 }
 
 /**
@@ -974,57 +1020,6 @@ void ata_acpi_on_disable(struct ata_device *dev)
 	ata_acpi_clear_gtf(dev);
 }
 
-static void ata_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
-{
-	struct ata_device *ata_dev = context;
-
-	if (event == ACPI_NOTIFY_DEVICE_WAKE && ata_dev &&
-			pm_runtime_suspended(&ata_dev->sdev->sdev_gendev))
-		scsi_autopm_get_device(ata_dev->sdev);
-}
-
-static void ata_acpi_add_pm_notifier(struct ata_device *dev)
-{
-	struct acpi_device *acpi_dev;
-	acpi_handle handle;
-	acpi_status status;
-
-	handle = ata_dev_acpi_handle(dev);
-	if (!handle)
-		return;
-
-	status = acpi_bus_get_device(handle, &acpi_dev);
-	if (ACPI_FAILURE(status))
-		return;
-
-	if (dev->sdev->can_power_off) {
-		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
-			ata_acpi_wake_dev, dev);
-		device_set_run_wake(&dev->sdev->sdev_gendev, true);
-	}
-}
-
-static void ata_acpi_remove_pm_notifier(struct ata_device *dev)
-{
-	struct acpi_device *acpi_dev;
-	acpi_handle handle;
-	acpi_status status;
-
-	handle = ata_dev_acpi_handle(dev);
-	if (!handle)
-		return;
-
-	status = acpi_bus_get_device(handle, &acpi_dev);
-	if (ACPI_FAILURE(status))
-		return;
-
-	if (dev->sdev->can_power_off) {
-		device_set_run_wake(&dev->sdev->sdev_gendev, false);
-		acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
-			ata_acpi_wake_dev);
-	}
-}
-
 static void ata_acpi_register_power_resource(struct ata_device *dev)
 {
 	struct scsi_device *sdev = dev->sdev;
@@ -1047,13 +1042,13 @@ static void ata_acpi_unregister_power_resource(struct ata_device *dev)
 
 void ata_acpi_bind(struct ata_device *dev)
 {
-	ata_acpi_add_pm_notifier(dev);
 	ata_acpi_register_power_resource(dev);
+	if (zpodd_dev_enabled(dev))
+		dev_pm_qos_expose_flags(&dev->sdev->sdev_gendev, 0);
 }
 
 void ata_acpi_unbind(struct ata_device *dev)
 {
-	ata_acpi_remove_pm_notifier(dev);
 	ata_acpi_unregister_power_resource(dev);
 }
 
@@ -1095,9 +1090,6 @@ static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev,
 				acpi_handle *handle)
 {
 	struct ata_device *ata_dev;
-	acpi_status status;
-	struct acpi_device *acpi_dev;
-	struct acpi_device_power_state *states;
 
 	if (ap->flags & ATA_FLAG_ACPI_SATA) {
 		if (!sata_pmp_attached(ap))
@@ -1114,21 +1106,6 @@ static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev,
 	if (!*handle)
 		return -ENODEV;
 
-	status = acpi_bus_get_device(*handle, &acpi_dev);
-	if (ACPI_FAILURE(status))
-		return 0;
-
-	/*
-	 * If firmware has _PS3 or _PR3 for this device,
-	 * and this ata ODD device support device attention,
-	 * it means this device can be powered off
-	 */
-	states = acpi_dev->power.states;
-	if ((states[ACPI_STATE_D3_HOT].flags.valid ||
-			states[ACPI_STATE_D3_COLD].flags.explicit_set) &&
-			ata_dev->flags & ATA_DFLAG_DA)
-		sdev->can_power_off = 1;
-
 	return 0;
 }
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 46cd3f4c6aa..497adea1f0d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2400,8 +2400,10 @@ int ata_dev_configure(struct ata_device *dev)
 			dma_dir_string = ", DMADIR";
 		}
 
-		if (ata_id_has_da(dev->id))
+		if (ata_id_has_da(dev->id)) {
 			dev->flags |= ATA_DFLAG_DA;
+			zpodd_init(dev);
+		}
 
 		/* print device info to dmesg */
 		if (ata_msg_drv(ap) && print_info)
@@ -5331,9 +5333,6 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 
 static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int *async)
 {
-	unsigned int ehi_flags = ATA_EHI_QUIET;
-	int rc;
-
 	/*
 	 * On some hardware, device fails to respond after spun down
 	 * for suspend.  As the device won't be used before being
@@ -5342,11 +5341,9 @@ static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int
 	 *
 	 * http://thread.gmane.org/gmane.linux.ide/46764
 	 */
-	if (mesg.event == PM_EVENT_SUSPEND)
-		ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
-
-	rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, async);
-	return rc;
+	unsigned int ehi_flags = ATA_EHI_QUIET | ATA_EHI_NO_AUTOPSY |
+				 ATA_EHI_NO_RECOVERY;
+	return ata_port_request_pm(ap, mesg, 0, ehi_flags, async);
 }
 
 static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
@@ -5367,40 +5364,38 @@ static int ata_port_suspend(struct device *dev)
 static int ata_port_do_freeze(struct device *dev)
 {
 	if (pm_runtime_suspended(dev))
-		pm_runtime_resume(dev);
+		return 0;
 
 	return ata_port_suspend_common(dev, PMSG_FREEZE);
 }
 
 static int ata_port_poweroff(struct device *dev)
 {
-	if (pm_runtime_suspended(dev))
-		return 0;
-
 	return ata_port_suspend_common(dev, PMSG_HIBERNATE);
 }
 
-static int __ata_port_resume_common(struct ata_port *ap, int *async)
+static int __ata_port_resume_common(struct ata_port *ap, pm_message_t mesg,
+				    int *async)
 {
 	int rc;
 
-	rc = ata_port_request_pm(ap, PMSG_ON, ATA_EH_RESET,
+	rc = ata_port_request_pm(ap, mesg, ATA_EH_RESET,
 		ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, async);
 	return rc;
 }
 
-static int ata_port_resume_common(struct device *dev)
+static int ata_port_resume_common(struct device *dev, pm_message_t mesg)
 {
 	struct ata_port *ap = to_ata_port(dev);
 
-	return __ata_port_resume_common(ap, NULL);
+	return __ata_port_resume_common(ap, mesg, NULL);
 }
 
 static int ata_port_resume(struct device *dev)
 {
 	int rc;
 
-	rc = ata_port_resume_common(dev);
+	rc = ata_port_resume_common(dev, PMSG_RESUME);
 	if (!rc) {
 		pm_runtime_disable(dev);
 		pm_runtime_set_active(dev);
@@ -5410,11 +5405,40 @@ static int ata_port_resume(struct device *dev)
 	return rc;
 }
 
+/*
+ * For ODDs, the upper layer will poll for media change every few seconds,
+ * which will make it enter and leave suspend state every few seconds. And
+ * as each suspend will cause a hard/soft reset, the gain of runtime suspend
+ * is very little and the ODD may malfunction after constantly being reset.
+ * So the idle callback here will not proceed to suspend if a non-ZPODD capable
+ * ODD is attached to the port.
+ */
 static int ata_port_runtime_idle(struct device *dev)
 {
+	struct ata_port *ap = to_ata_port(dev);
+	struct ata_link *link;
+	struct ata_device *adev;
+
+	ata_for_each_link(link, ap, HOST_FIRST) {
+		ata_for_each_dev(adev, link, ENABLED)
+			if (adev->class == ATA_DEV_ATAPI &&
+			    !zpodd_dev_enabled(adev))
+				return -EBUSY;
+	}
+
 	return pm_runtime_suspend(dev);
 }
 
+static int ata_port_runtime_suspend(struct device *dev)
+{
+	return ata_port_suspend_common(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int ata_port_runtime_resume(struct device *dev)
+{
+	return ata_port_resume_common(dev, PMSG_AUTO_RESUME);
+}
+
 static const struct dev_pm_ops ata_port_pm_ops = {
 	.suspend = ata_port_suspend,
 	.resume = ata_port_resume,
@@ -5423,8 +5447,8 @@ static const struct dev_pm_ops ata_port_pm_ops = {
 	.poweroff = ata_port_poweroff,
 	.restore = ata_port_resume,
 
-	.runtime_suspend = ata_port_suspend,
-	.runtime_resume = ata_port_resume_common,
+	.runtime_suspend = ata_port_runtime_suspend,
+	.runtime_resume = ata_port_runtime_resume,
 	.runtime_idle = ata_port_runtime_idle,
 };
 
@@ -5441,7 +5465,7 @@ EXPORT_SYMBOL_GPL(ata_sas_port_async_suspend);
 
 int ata_sas_port_async_resume(struct ata_port *ap, int *async)
 {
-	return __ata_port_resume_common(ap, async);
+	return __ata_port_resume_common(ap, PMSG_RESUME, async);
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_async_resume);
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index bcf4437214f..f9476fb3ac4 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1591,7 +1591,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
  *	RETURNS:
  *	0 on success, AC_ERR_* mask on failure.
  */
-static unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
+unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
 {
 	u8 cdb[ATAPI_CDB_LEN] = { TEST_UNIT_READY, 0, 0, 0, 0, 0 };
 	struct ata_taskfile tf;
@@ -1624,7 +1624,7 @@ static unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
  *	RETURNS:
  *	0 on success, AC_ERR_* mask on failure
  */
-static unsigned int atapi_eh_request_sense(struct ata_device *dev,
+unsigned int atapi_eh_request_sense(struct ata_device *dev,
 					   u8 *sense_buf, u8 dfl_sense_key)
 {
 	u8 cdb[ATAPI_CDB_LEN] =
@@ -3857,6 +3857,8 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 				rc = atapi_eh_clear_ua(dev);
 				if (rc)
 					goto rest_fail;
+				if (zpodd_dev_enabled(dev))
+					zpodd_post_poweron(dev);
 			}
 		}
 
@@ -4022,11 +4024,12 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
 {
 	unsigned long flags;
 	int rc = 0;
+	struct ata_device *dev;
 
 	/* are we suspending? */
 	spin_lock_irqsave(ap->lock, flags);
 	if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
-	    ap->pm_mesg.event == PM_EVENT_ON) {
+	    ap->pm_mesg.event & PM_EVENT_RESUME) {
 		spin_unlock_irqrestore(ap->lock, flags);
 		return;
 	}
@@ -4034,6 +4037,18 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
 
 	WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
 
+	/*
+	 * If we have a ZPODD attached, check its zero
+	 * power ready status before the port is frozen.
+	 * Only needed for runtime suspend.
+	 */
+	if (PMSG_IS_AUTO(ap->pm_mesg)) {
+		ata_for_each_dev(dev, &ap->link, ENABLED) {
+			if (zpodd_dev_enabled(dev))
+				zpodd_on_suspend(dev);
+		}
+	}
+
 	/* tell ACPI we're suspending */
 	rc = ata_acpi_on_suspend(ap);
 	if (rc)
@@ -4045,7 +4060,7 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
 	if (ap->ops->port_suspend)
 		rc = ap->ops->port_suspend(ap, ap->pm_mesg);
 
-	ata_acpi_set_state(ap, PMSG_SUSPEND);
+	ata_acpi_set_state(ap, ap->pm_mesg);
  out:
 	/* report result */
 	spin_lock_irqsave(ap->lock, flags);
@@ -4085,7 +4100,7 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 	/* are we resuming? */
 	spin_lock_irqsave(ap->lock, flags);
 	if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
-	    ap->pm_mesg.event != PM_EVENT_ON) {
+	    !(ap->pm_mesg.event & PM_EVENT_RESUME)) {
 		spin_unlock_irqrestore(ap->lock, flags);
 		return;
 	}
@@ -4104,7 +4119,7 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 		ata_for_each_dev(dev, link, ALL)
 			ata_ering_clear(&dev->ering);
 
-	ata_acpi_set_state(ap, PMSG_ON);
+	ata_acpi_set_state(ap, ap->pm_mesg);
 
 	if (ap->ops->port_resume)
 		rc = ap->ops->port_resume(ap);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 7c337e754da..318b4135818 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -933,7 +933,11 @@ static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
  *	block specified for the ATA pass through commands.  Regardless
  *	of whether the command errored or not, return a sense
  *	block. Copy all controller registers into the sense
- *	block. Clear sense key, ASC & ASCQ if there is no error.
+ *	block. If there was no error, we get the request from an ATA
+ *	passthrough command, so we use the following sense data:
+ *	sk = RECOVERED ERROR
+ *	asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE
+ *      
  *
  *	LOCKING:
  *	None.
@@ -959,6 +963,10 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
 		ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
 				   &sb[1], &sb[2], &sb[3], verbose);
 		sb[1] &= 0x0f;
+	} else {
+		sb[1] = RECOVERED_ERROR;
+		sb[2] = 0;
+		sb[3] = 0x1D;
 	}
 
 	/*
@@ -1733,10 +1741,12 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 
 	/* For ATA pass thru (SAT) commands, generate a sense block if
 	 * user mandated it or if there's an error.  Note that if we
-	 * generate because the user forced us to, a check condition
-	 * is generated and the ATA register values are returned
+	 * generate because the user forced us to [CK_COND =1], a check
+	 * condition is generated and the ATA register values are returned
 	 * whether the command completed successfully or not. If there
-	 * was no error, SK, ASC and ASCQ will all be zero.
+	 * was no error, we use the following sense data:
+	 * sk = RECOVERED ERROR
+	 * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE
 	 */
 	if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
 	    ((cdb[2] & 0x20) || need_sense)) {
@@ -3755,6 +3765,8 @@ static void ata_scsi_remove_dev(struct ata_device *dev)
 	mutex_lock(&ap->scsi_host->scan_mutex);
 	spin_lock_irqsave(ap->lock, flags);
 
+	if (zpodd_dev_enabled(dev))
+		zpodd_exit(dev);
 	ata_acpi_unbind(dev);
 
 	/* clearing dev->sdev is protected by host lock */
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
new file mode 100644
index 00000000000..90b159b740b
--- /dev/null
+++ b/drivers/ata/libata-zpodd.c
@@ -0,0 +1,299 @@
+#include <linux/libata.h>
+#include <linux/cdrom.h>
+#include <linux/pm_runtime.h>
+#include <linux/module.h>
+#include <scsi/scsi_device.h>
+
+#include "libata.h"
+
+static int zpodd_poweroff_delay = 30; /* 30 seconds for power off delay */
+module_param(zpodd_poweroff_delay, int, 0644);
+MODULE_PARM_DESC(zpodd_poweroff_delay, "Poweroff delay for ZPODD in seconds");
+
+enum odd_mech_type {
+	ODD_MECH_TYPE_SLOT,
+	ODD_MECH_TYPE_DRAWER,
+	ODD_MECH_TYPE_UNSUPPORTED,
+};
+
+struct zpodd {
+	enum odd_mech_type	mech_type; /* init during probe, RO afterwards */
+	struct ata_device	*dev;
+
+	/* The following fields are synchronized by PM core. */
+	bool			from_notify; /* resumed as a result of
+					      * acpi wake notification */
+	bool			zp_ready; /* ZP ready state */
+	unsigned long		last_ready; /* last ZP ready timestamp */
+	bool			zp_sampled; /* ZP ready state sampled */
+	bool			powered_off; /* ODD is powered off
+					      *	during suspend */
+};
+
+static int eject_tray(struct ata_device *dev)
+{
+	struct ata_taskfile tf = {};
+	const char cdb[] = {  GPCMD_START_STOP_UNIT,
+		0, 0, 0,
+		0x02,     /* LoEj */
+		0, 0, 0, 0, 0, 0, 0,
+	};
+
+	tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+	tf.command = ATA_CMD_PACKET;
+	tf.protocol = ATAPI_PROT_NODATA;
+
+	return ata_exec_internal(dev, &tf, cdb, DMA_NONE, NULL, 0, 0);
+}
+
+/* Per the spec, only slot type and drawer type ODD can be supported */
+static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
+{
+	char buf[16];
+	unsigned int ret;
+	struct rm_feature_desc *desc = (void *)(buf + 8);
+	struct ata_taskfile tf = {};
+
+	char cdb[] = {  GPCMD_GET_CONFIGURATION,
+			2,      /* only 1 feature descriptor requested */
+			0, 3,   /* 3, removable medium feature */
+			0, 0, 0,/* reserved */
+			0, sizeof(buf),
+			0, 0, 0,
+	};
+
+	tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+	tf.command = ATA_CMD_PACKET;
+	tf.protocol = ATAPI_PROT_PIO;
+	tf.lbam = sizeof(buf);
+
+	ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
+				buf, sizeof(buf), 0);
+	if (ret)
+		return ODD_MECH_TYPE_UNSUPPORTED;
+
+	if (be16_to_cpu(desc->feature_code) != 3)
+		return ODD_MECH_TYPE_UNSUPPORTED;
+
+	if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1)
+		return ODD_MECH_TYPE_SLOT;
+	else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1)
+		return ODD_MECH_TYPE_DRAWER;
+	else
+		return ODD_MECH_TYPE_UNSUPPORTED;
+}
+
+static bool odd_can_poweroff(struct ata_device *ata_dev)
+{
+	acpi_handle handle;
+	acpi_status status;
+	struct acpi_device *acpi_dev;
+
+	handle = ata_dev_acpi_handle(ata_dev);
+	if (!handle)
+		return false;
+
+	status = acpi_bus_get_device(handle, &acpi_dev);
+	if (ACPI_FAILURE(status))
+		return false;
+
+	return acpi_device_can_poweroff(acpi_dev);
+}
+
+/* Test if ODD is zero power ready by sense code */
+static bool zpready(struct ata_device *dev)
+{
+	u8 sense_key, *sense_buf;
+	unsigned int ret, asc, ascq, add_len;
+	struct zpodd *zpodd = dev->zpodd;
+
+	ret = atapi_eh_tur(dev, &sense_key);
+
+	if (!ret || sense_key != NOT_READY)
+		return false;
+
+	sense_buf = dev->link->ap->sector_buf;
+	ret = atapi_eh_request_sense(dev, sense_buf, sense_key);
+	if (ret)
+		return false;
+
+	/* sense valid */
+	if ((sense_buf[0] & 0x7f) != 0x70)
+		return false;
+
+	add_len = sense_buf[7];
+	/* has asc and ascq */
+	if (add_len < 6)
+		return false;
+
+	asc = sense_buf[12];
+	ascq = sense_buf[13];
+
+	if (zpodd->mech_type == ODD_MECH_TYPE_SLOT)
+		/* no media inside */
+		return asc == 0x3a;
+	else
+		/* no media inside and door closed */
+		return asc == 0x3a && ascq == 0x01;
+}
+
+/*
+ * Update the zpodd->zp_ready field. This field will only be set
+ * if the ODD has stayed in ZP ready state for zpodd_poweroff_delay
+ * time, and will be used to decide if power off is allowed. If it
+ * is set, it will be cleared during resume from powered off state.
+ */
+void zpodd_on_suspend(struct ata_device *dev)
+{
+	struct zpodd *zpodd = dev->zpodd;
+	unsigned long expires;
+
+	if (!zpready(dev)) {
+		zpodd->zp_sampled = false;
+		zpodd->zp_ready = false;
+		return;
+	}
+
+	if (!zpodd->zp_sampled) {
+		zpodd->zp_sampled = true;
+		zpodd->last_ready = jiffies;
+		return;
+	}
+
+	expires = zpodd->last_ready +
+		  msecs_to_jiffies(zpodd_poweroff_delay * 1000);
+	if (time_before(jiffies, expires))
+		return;
+
+	zpodd->zp_ready = true;
+}
+
+bool zpodd_zpready(struct ata_device *dev)
+{
+	struct zpodd *zpodd = dev->zpodd;
+	return zpodd->zp_ready;
+}
+
+/*
+ * Enable runtime wake capability through ACPI and set the powered_off flag,
+ * this flag will be used during resume to decide what operations are needed
+ * to take.
+ *
+ * Also, media poll needs to be silenced, so that it doesn't bring the ODD
+ * back to full power state every few seconds.
+ */
+void zpodd_enable_run_wake(struct ata_device *dev)
+{
+	struct zpodd *zpodd = dev->zpodd;
+
+	sdev_disable_disk_events(dev->sdev);
+
+	zpodd->powered_off = true;
+	device_set_run_wake(&dev->sdev->sdev_gendev, true);
+	acpi_pm_device_run_wake(&dev->sdev->sdev_gendev, true);
+}
+
+/* Disable runtime wake capability if it is enabled */
+void zpodd_disable_run_wake(struct ata_device *dev)
+{
+	struct zpodd *zpodd = dev->zpodd;
+
+	if (zpodd->powered_off) {
+		acpi_pm_device_run_wake(&dev->sdev->sdev_gendev, false);
+		device_set_run_wake(&dev->sdev->sdev_gendev, false);
+	}
+}
+
+/*
+ * Post power on processing after the ODD has been recovered. If the
+ * ODD wasn't powered off during suspend, it doesn't do anything.
+ *
+ * For drawer type ODD, if it is powered on due to user pressed the
+ * eject button, the tray needs to be ejected. This can only be done
+ * after the ODD has been recovered, i.e. link is initialized and
+ * device is able to process NON_DATA PIO command, as eject needs to
+ * send command for the ODD to process.
+ *
+ * The from_notify flag set in wake notification handler function
+ * zpodd_wake_dev represents if power on is due to user's action.
+ *
+ * For both types of ODD, several fields need to be reset.
+ */
+void zpodd_post_poweron(struct ata_device *dev)
+{
+	struct zpodd *zpodd = dev->zpodd;
+
+	if (!zpodd->powered_off)
+		return;
+
+	zpodd->powered_off = false;
+
+	if (zpodd->from_notify) {
+		zpodd->from_notify = false;
+		if (zpodd->mech_type == ODD_MECH_TYPE_DRAWER)
+			eject_tray(dev);
+	}
+
+	zpodd->zp_sampled = false;
+	zpodd->zp_ready = false;
+
+	sdev_enable_disk_events(dev->sdev);
+}
+
+static void zpodd_wake_dev(acpi_handle handle, u32 event, void *context)
+{
+	struct ata_device *ata_dev = context;
+	struct zpodd *zpodd = ata_dev->zpodd;
+	struct device *dev = &ata_dev->sdev->sdev_gendev;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && pm_runtime_suspended(dev)) {
+		zpodd->from_notify = true;
+		pm_runtime_resume(dev);
+	}
+}
+
+static void ata_acpi_add_pm_notifier(struct ata_device *dev)
+{
+	acpi_handle handle = ata_dev_acpi_handle(dev);
+	acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+				    zpodd_wake_dev, dev);
+}
+
+static void ata_acpi_remove_pm_notifier(struct ata_device *dev)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->sdev->sdev_gendev);
+	acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, zpodd_wake_dev);
+}
+
+void zpodd_init(struct ata_device *dev)
+{
+	enum odd_mech_type mech_type;
+	struct zpodd *zpodd